www.vishay.com TCRT, TCRT Reflective Optical Sensor with Transistor Output 2836 TCRT A C E C TCRT 955_ FEATURES Package type: leaded Detector type: phototransistor Dimensions (L x W x H in mm): 7 x 4 x 2.5 Peak operating distance: mm Operating range within > 2 % relative collector current:.2 mm to 4 mm Typical output current under test: I C =.5 ma Daylight blocking filter Emitter wavelength: 95 nm Lead (Pb)-free soldering released Material categorization: For definitions of compliance please see www.vishay.com/doc?9992 DESCRIPTION The TCRT and TCRT are reflective sensors which include an infrared emitter and phototransistor in a leaded package which blocks visible light. APPLICATIONS Optoelectronic scanning and switching devices i.e., index sensing, coded disk scanning etc. (optoelectronic encoder assemblies for transmissive sensing). PRODUCT SUMMARY PART NUMBER DISTANCE FOR MAXIMUM CTR rel () (mm) DISTANCE RANGE FOR RELATIVE I out > 2 % (mm) TYPICAL OUTPUT CURRENT UNDER TEST (2) (ma) DAYLIGHT BLOCKING FILTER INTEGRATED TCRT.2 to 4.5 Yes TCRT.2 to 4.5 Yes Notes () CTR: current transfere ratio, I out /I in (2) Conditions like in table basic charactristics/sensor ORDERING INFORMATION ORDERING CODE PACKAGING VOLUME () REMARKS TCRT Bulk MOQ: pcs, pcs/bulk Straight leads TCRT Bulk MOQ: pcs, pcs/bulk Bent leads Note () MOQ: minimum order quantity ABSOLUTE MAXIMUM RATINGS (T amb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT SENSOR Total power dissipation T amb 25 C P tot 2 mw Ambient temperature range T amb - 4 to + 85 C Storage temperature range T stg - 4 to + C Soldering temperature 2 mm distance to package, t 5 s T sd 26 C INPUT (EMITTER) Reverse voltage V R 5 V Forward current I F 5 ma Forward surge current t p μs I FSM 3 A Power dissipation T amb 25 C P V mw Junction temperature T j C Rev..8, -Jun-2 Document Number: 83752 For technical questions, contact: sensorstechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
www.vishay.com TCRT, TCRT ABSOLUTE MAXIMUM RATINGS (T amb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT OUTPUT (DETECTOR) Collector emitter voltage V CEO 32 V Emitter collector voltage V ECO 5 V Collector current I C 5 ma Power dissipation T amb 25 C P V mw Junction temperature T j C ABSOLUTE MAXIMUM RATINGS (T amb = 25 C, unless otherwise specified) 3 P - Power Dissipation (mw) 2 Coupled device Phototransistor IR - diode 25 5 75 95 7 T amb - Ambient Temperature ( C) Fig. - Power Dissipation Limit vs. Ambient Temperature BASIC CHARACTERISTICS (T amb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT SENSOR V Collector current CE = 5 V, I F = 2 ma, I d = mm (figure 2) () C.3.5 ma Cross talk current V CE = 5 V, I F = 2 ma, (figure ) I (2) CX μa Collector emitter saturation voltage I F = 2 ma, I C =. ma, d = mm (figure 2) Notes () Measured with the Kodak neutral test card, white side with 9 % diffuse reflectance (2) Measured without reflecting medium V CEsat ().3 V INPUT (EMITTER) Forward voltage I F = 5 ma V F.25.6 V Radiant intensity I F = 5 ma, t p = 2 ms I e 7.5 mw/sr Peak wavelength I F = ma λ P 94 nm Virtual source diameter Method: 63 % encircled energy d.2 mm OUTPUT (DETECTOR) Collector emitter voltage I C = ma V CEO 32 V Emitter collector voltage I E = μa V ECO 5 V Collector dark current V CE = 2 V, I F = A, E = lx I CEO 2 na Rev..8, -Jun-2 2 Document Number: 83752 For technical questions, contact: sensorstechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
www.vishay.com TCRT, TCRT Reflecting medium (Kodak neutral test card) d ~ ~~ ~ ~~ Detector Emitter A C E C 95 893 Fig. 2 - Test Condition BASIC CHARACTERISTICS (T amb = 25 C, unless otherwise specified) I F - Forward Current (ma) I - Collector Current (ma) C... Kodak Neutral Card (White Side) d = mm I F = 5 ma 2 ma ma 5 ma 2 ma 96 862..4.8.2.6 2. V F - Forward Voltage (V).. 95 75 V CE - Collector Emitter Voltage (V) Fig. 3 - Forward Current vs. Forward Voltage Fig. 5 - Collector Current vs. Collector Emitter Voltage CTR rel - Relative Current Transfer Ratio 2..5..5-25 95 74 V CE = 5 V I F = 2 ma d = mm 25 T amb - Ambient Temperature ( C) Fig. 4 - Relative Current Transfer Ratio vs. Ambient Temperature 5 75 CTR - Current Transfer Ratio (%).. 95 76 I F - Forward Current (ma) d = mm V CE = 5 V Fig. 6 - Current Transfer Ratio vs. Forward Current Rev..8, -Jun-2 3 Document Number: 83752 For technical questions, contact: sensorstechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
www.vishay.com TCRT, TCRT I - Collector Current (ma) C.. 95 77 d - Distance (mm) V CE =5V I F = 2 ma 2 4 6 8 Fig. 7 - Collector Current vs. Distance Fig. 8 - Relative Collector Current vs. Displacement I Crel - Relative Collector Current 2 8 6 4 2 95 78 d = mm V CE =5V I F = 2 ma 2 3 Sensing Object 4 d s - Displacement (mm) 5 s 6 PACKAGE DIMENSIONS in millimeters 4768 4769 Rev..8, -Jun-2 4 Document Number: 83752 For technical questions, contact: sensorstechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
Packaging and Ordering Information Packaging and Ordering Information PART NUMBER MOQ () PCS PER TUBE Notes () MOQ: minimum order quantity (2) Please refer to datasheets TUBE SPECIFICATION FIGURES TUBE SPEC. (FIGURE) CONSTITUENTS (FORMS) CNY7 4 8 28 TCPT3X 2 Reel (2) 29 TCRT Bulk - 26 TCRT Bulk - 26 TCRT5 45 5 2 27 TCRT5L 24 48 3 27 TCST3 52 65 5 24 TCST3L 26 65 6 24 TCST3 2 85 4 24 TCST22 2 85 4 24 TCST23 48 6 7 24 TCST3 2 85 4 24 TCST23 2 85 4 24 TCST222 2 85 4 24 TCST23 2 85 4 24 TCST525 486 3 8 24 TCUT3X 2 Reel (2) 29 TCZT82-PAER 25 Bulk - 22 598 Fig. Document Number: 82 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com Rev.., 2-Jul-9
Packaging and Ordering Information Packaging and Ordering Information 52 Fig. 2 52 Fig. 3 www.vishay.com For technical questions, contact: optocoupleranswers@vishay.com Document Number: 82 2 Rev.., 2-Jul-9
Packaging and Ordering Information Packaging and Ordering Information 599 Fig. 4 Fig. 5 522 Document Number: 82 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com Rev.., 2-Jul-9 3
Packaging and Ordering Information Packaging and Ordering Information 596 Fig. 6 595 Fig. 7 www.vishay.com For technical questions, contact: optocoupleranswers@vishay.com Document Number: 82 4 Rev.., 2-Jul-9
Packaging and Ordering Information Packaging and Ordering Information 2257 Fig. 8 Document Number: 82 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com Rev.., 2-Jul-9 5
www.vishay.com Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2/65/EU of The European Parliament and of the Council of June 8, 2 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 22/95/EC. We confirm that all the products identified as being compliant to Directive 22/95/EC conform to Directive 2/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS79A standards. Please note that some Vishay documentation may still make reference to the IEC 6249-2-2 definition. We confirm that all the products identified as being compliant to IEC 6249-2-2 conform to JEDEC JS79A standards. Revision: 2-Oct-2 Document Number: 9