Section index COMPACT FACE FRAME HINGES...-2 to -6 STANDARD APPLICATION HINGES 94 Degree Opening...-7 110 Degree Opening...-8 to -11 120 Degree Opening...-12 to -13 125 Degree Opening...-14 to -15 165 Degree Opening...-16 to -17 170 Degree Opening...-18 to -19 SPECIALTY APPLICATION HINGES Thick & Profile Door...-20 to -23 lind Corner...-24 to -25 Pie Cut Corner...-25 to -26 Positive & Negative Angle...-27 to -30 Glass Door Hinge...-30 Push To Open...-31 to -32 SALICE SILENTIA INTEGRATED SOFT-CLOSE HINGES...-33 to -37 MISCELLANEOUS CONCEALED HINGES Surface Hinge...-38 Mitre Hinge...-38 Fascia Hinge...-38 ASE PLATES - GRASS Face Frame Cabinet Style...-39 Nexis Series...-40 to -41 3000 Series...-42 ASE PLATES - SALICE Salice Mounting Plate Selection Guide...-43 Face Frame Cabinet Style...-44 Frameless Cabinet Style...-45 to -46 ASE PLATES - TITUS...-47 HINGE SOFT-CLOSE ADAPTERS Grass...-48 to -49 Salice...-50 to -51 Titus...-52 GRASS/WURTH HINGE ACCESSORIES...-53 SALICE HINGE ACCESSORIES...-54 800-UY-AER (289-2237) www.baersupply.com Fax: 888-558-2237-1
ONE Piece face frame hinges 106 degree one piece self-closing face frame hinges Two & Three Cam Adjustment/Overlay from 1/4 to 1-7/16 Salice Excentra and Excen-three face frame hinges have all steel one piece construction with nickel plating to resist corrosion and have a lifetime warranty A cup depth of only 11mm allows this hinge to be used on most door styles Excentra, two cam adjustment hinges provide: cam depth adjustment (+2.8mm to -0.5mm), cam lateral adjustment (+3.0mm to -2mm) and slotted screw hole height adjustment (+/-2mm) Excen-three, three cam adjustment hinges provides: cam depth adjustment (+2.8mm to -0.5mm), Excentra cam lateral adjustment (+3.0mm to -2mm) and cam height adjustment (+/-2mm) Hinge cup edge drilling distance is 2.5mm Excentra and Excen-three hinges with overlays of 1/2 and greater have zero door protrusion Hinge is designed to work with cabinet doors up to 3/4 thick Excentra and Excen-three hinges are available in two cabinet door fixing designs: Screw-On via two #6 x 5/8 wood screws (not included) and Press-In 8mm dowels All hinges are self-closing design Excen-three Press-In Excentra and Excen-three face frame hinges are designed to work with Salice Type U soft-close devices illustrated on page -50 Packing: 300 hinges per box. Sold in: oth broken and full box quantities. Discount available for 50 hinges and full box orders. two cam one piece face frame hinges Overlay Close Type Screw-On Cup Press-In 45mm 1/4 Self-close UCSP3Y99 UCSR3Y99 45mm 5/16 Self-close UCSP3Z99 UCSR3Z99 45mm 3/8 Self-close UCSP3999 UCSR3999 45mm 7/16 Self-close UCSP3899 UCSR3899 45mm 1/2 Self-close UCSP3799 UCSR3799 45mm 9/16 Self-close UCSP3699 UCSR3699 45mm 5/8 Self-close UCSP3599 UCSR3599 45mm 3/4 Self-close UCSP3499 UCSR3499 45mm 1 Self-close UCSP3299N UCSR3299N 45mm 1-1/8 Self-close UCSP3199N UCSR3199N 45mm 1-1/4 Self-close UCSP3A99N UCSR3A99N 45mm 1-5/16 Self-close UCSP399N UCSR399N 45mm 1-3/8 Self-close UCSP3C99N UCSR3D99N 45mm 1-7/16 Self-close UCSP3D99N UCSR3D99N THREE cam one piece face frame hinges Overlay Close Type Screw-On Cup Press-In 45mm 1/2 Self-close UCSP3799XR UCSR3799XR 45mm 9/16 Self-close UCSP3699XR UCSR3699XR 45mm 5/8 Self-close UCSP3599XR UCSR3599XR 45mm 3/4 Self-close UCSP3499XR UCSR3499XR 45mm 1 Self-close UCSP3299NR UCSR3299NR 45mm 1-1/4 Self-close UCSP3A99NR UCSR3A99NR 45mm 1-5/16 Self-close UCSP399NR UCSR399NR 45mm 1-3/8 Self-close UCSP3C99NR UCSR3C99NR 45mm 1-7/16 Self-close UCSP3D99NR UCSR3D99NR 1/4 to 3/4 Overlays Minimum A = 8.3mm A 1 to 1-7/16 Overlays Minimum A = 5.2mm A Excentra & Excen-three Frame Fastening Screw: Two cam 1/4 to 7/16 overlay use #10 x 1 screws Two cam 1/2 and greater overlay use#10 x 3/4 screws Three cams all overlays use two #6 x 5/8 screws Excen-three CAM lateral adjustment Excen-three CAM depth adjustment Excen-three CAM height adjustment - 2 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!
ONE Piece face frame hinges 108 degree one piece face frame hinge Two Cam Height & Depth Adjustment/Overlays from 1/4 to 1-1/2 The Grass face frame TEC 864 Series hinge line is made in the USA and is engineered to exceed industry standards for load rating, opening and closing cycles All TEC 864 hinges feature a solid metal cup and all moving mechanism parts have all-steel construction 108 degree TEC 864 hinges are designed to work with doors up to 3/4 thick TEC hinges have a shallow, 10.5mm (13/32 ) cup to accommodate most profiled door edges TEC 864 hinges have two cabinet mounting options: side mount and wrap-around mount. The wraparound mount style mounts on 3/4 thick face frames by positively locating hinge base on the face frame The 108 degree hinge has three dimensional adjustment: (1) cam side adjustment ( +/- 1.5mm) (2) cam depth adjustment (2.5mm out and.5mm in) and (3) slotted screw hole height adjustment (+/- 2mm) see illustration below Available in 2 cabinet door cup fastening designs: Screw-On & Doweled Available boring patterns; 42mm and 45mm Uses #6 x 5/8 flat head for hinge cup and #8 x 3/4 pan head screws to fasten base plate to face frame (see page -53) Packing: Full boxes of 300 hinges. Sold In: oth broken and full box quantities. Discount available for full box orders. side mount TEC 864 Hinges Overlay Screw-On Cup Item # Item # 42mm 1/4 GF03046-15 GF03044-15 45mm 1/4 - GF03045-15 42mm 1/2 GF03026-15 GF03024-15 45mm 1/2 - GF03025-15 42mm 3/4 GF02962-15 GF02960-15 45mm 3/4 - - 42mm 1 GF02946-15 GF02944-15 45mm 1 - GF02945-15 42mm 1-1/4 GF03050-15 GF03048-15 45mm 1-1/4 - GF03049-15 42mm 1-3/8 GF03088-15 GF03086-15 45mm 1-3/8 - GF03087-15 42mm 1-1/2 GF03100-15 GF03098-15 45mm 1-1/2 - GF03099-15 wrap around mount TEC 864 Hinges Overlay Screw-On Cup 42mm 1/4 GF02930-15 GF02928-15 45mm 1/4 - GF02992-15 42mm 1/2 GF02926-15 GF02924-15 45mm 1/2 - GF02925-15 42mm 3/4 GF02958-15 GF02956-15 45mm 3/4 - GF02957-15 42mm 1 - GF02920-15 45mm 1 - GF02921-15 42mm 1-1/4 GF02934-15 GF02932-15 45mm 1-1/4 - GF02933-15 42mm 1-3/8 GF02938-15 GF02936-15 45mm 1-3/8 - GF02937-15 42mm 1-1/2 GF02942-15 GF02940-15 45mm 1-1/2 - GF02941-15 Closed Door Dimensions Minimum Reveal Dimensions #8 x 3/4 pan head screw 9.5 (3/8 ) 8.5 (11/32 ) Arm Clearance Open Door Dimensions Door Clearance Min. Reveal 108 Degree Max. Door Thickness 19 (3/4 ) Overall Dimensions 42mm Drilling 45mm Drilling 1. Side Adjustment 2. Height Adjustment 3. Depth Adjustment 800-UY-AER (289-2237) www.baersupply.com Fax: 888-558-2237-3
one piece face frame hinges 108 degree one piece face frame hinge with integrated soft-close Two Cam Height & Depth Adjustment/Overlays from 1/2 to 1-1/4 Grass TEC Soft-Close Series hinge with soft-close have a soft-close mechanism built into the hinge cup No additional parts or installation required Shallow drilling depth remains unchanged from standard TEC 864 series, 13/32 (10.5mm) The closing force automatically adjusts to the door size and weight Made in USA all the same features of the standard TEC 864 series hinges plus soft-close Three dimensional adjusting hinge, cam side adjustment (+/- 1.5mm) cam depth adjustment (2.5mm out.5mm in) and slotted screw height adjustment (+/-2mm) Wrap style base plate design makes for easy door installation on 3/4 thick face frames Available in both 42mm and 45mm boring pattern doweled hinge cup for machine insertion Uses #6 x 5/8 flat head for hinge cup and #8 x 3/4 pan head screws to fasten base plate to face frame (see page -53) Packing: Full box quantities of 300 hinges. Sold In: oth broken and full box quantities. Discount available for full box orders. Soft-close with wrap around mount Overlay Doweled Cup 42mm 1/2 GF02824-15 45mm 1/2 GF02870-15 42mm 1 GF02834-15 45mm 1 GF02745-15 42mm 1-1/4 GF02836-15 45mm 1-1/4 GF01647-15 NOTE: See page -3 for TEC Soft-Close Hinge dimensions Number of Hinges Per Door AVAILALE FALL 2011! 8.5 (11/32 ) Arm Clearance 108 degree one piece face frame hinges Economy 1/2 & 7/16 Overlay The Grass TEC 861 is an economy priced one piece face frame hinge Made in USA all metal construction exceeds industry standards for weight and closing cycles Hinge features a shallow cup depth of 10.5mm (13/32 ) perfect for edge profile doors Face frame mounting plate has locating tabs for easy fastening to face frames Drilling distance for all overlays is 2.5mm ( 3/32 ) from door edge For door thickness from 1/2 to 3/4 Use #8 x3/4 pan head screw to mount to face frame and #6 x 5/8 flat head screws to attach hinge cup to door (see page -53 for screws) Side adjustment can be achieved using 1/16 spacer (see page -53) Packing: Full box quantity of 400 hinges. Sold In: oth broken and full box quantities. Discount available for full box orders. 108 Degree Clearances Door Open Door Clearance Max. Door Thickness 19 (3/4 ) Minimum Reveal Dimensions #8 x 3/4 pan head screw 9.5 (3/8 ) Min. Reveal Dimensions Door Closed Overlay Doweled Cup side mount TEC 861 42mm 7/16 GF02859-16 wrap around TEC 861 42mm 1/4 GF02794-16 42mm 1/2 GF030725-16 adjustment spacer 1/16-1/2 GF00047-42 - 4 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!
ONE Piece face frame hinges 108 degree one piece face frame hinges For MDF Frame Material, 1/2 Overlay The Grass TEC 861 MDF material face frame hinge has a patented wrap around base plate specifically designed for use with MDF face frame material this design helps prevent material splitting Made in USA, all metal construction exceeds industry standards for weight and closing cycles Order hinge based on MDF frame thickness, three specific MDF thickness hinges are available: 1/2, 5/8 and 3/4 Available with doweled cup cabinet attachment only Use #8 x3/4 pan head screw to mount to face frame and #6 x 5/8 flat head screws to attach hinge cup to door (see page -53 for screws) Packing: Full box quantity of 250 hinges. Sold In: oth broken and full box quantities. Discount available for full box orders. Overlay Doweled Cup MDF Frame Thickness wrap around 861 for mdf face frames 42mm 1/2 GF30396-14 1/2 42mm 1/2 GF30397-14 5/8 42mm 1/2 GF30398-14 3/4 adjustment spacer 1/16-1/16 - GF00209-42 Dimensions Door Closed Minimum Reveal 108 degree two piece face frame hinges For Face-Mount Applications Grass TEC 862 Series two-piece hinge consists of hinge and face mount plate combination making door installation easier Made in the USA, this hinge exceeds industry standards for weight and closing cycles Loose hinge All metal construction features a shallow cup depth of 10.5mm perfect for edge profile doors Position base plate on front of face frame to achieve variable overlays perfect for re-facers For overlays 1-3/8 and greater Drilling distance is 2.5mm ( 3/32 ) from door edge For door thickness from 5/8 to 3/4 Loose base plate Order hinge cups and face mount base plate separately Available in doweled cup and screw on cabinet attachment Available in 42mm and 45mm boring patterns Use #6 x 5/8 flat head screws to mount to face frame and door to hinge cup (see page -53 for screws) Packing: Full box quantity of 50. Sold In: oth broken and full box quantities. Discount available for full box orders. Screw-On Cup Doweled Cup tec 862 series loose hinge cups 42mm GF02800-19 GF02801-19 45mm - GF00113-19 ase plate Overlay base plates (face mount) 1-3/8 min. GF29155-19 1. Side Adjustment 1.5mm 2. Height Adjustment +/-2mm 3. Minimum Reveal Dimensions Door Closed Minimum Reveal Min. Reveal Overall Dimensions 800-UY-AER (289-2237) www.baersupply.com Fax: 888-558-2237-5
face frame hinges 110 degree two piece face frame hinges Multiple Pivot Hinge Multiple pivot hinge allows tight gap between door and frame All metal construction exceeds industry standards for weight and closing cycles 1/2 or 11/16 overlay based on base plate chosen Height, depth and side adjustment of 2mm Order hinge arm and base plate separately Use #6 x 5/8 flat head screws for base plates and cup fastening (see page -53 for screws) Packing: Full box quantity of 500 hinge arms and 500 base plates. Sold In: oth broken and full box quantities. Door Closed Discount available for full box orders. tec 872 series Screw-On Cup Doweled Cup 45mm GF43727 GF872VS-845 Overlay ase plate base plates 1/2 GF43731-43 11/16 GF43730-43 11/16 Overlay 1. Side Adjustment 2. Height Adjustment 3. Depth Adjustment Overall Dimensions 130 degree one piece face frame hinges Designed For Minimal Gap/Reveal Grass ACC 140 hinge is designed to give a frameless look to face frame cabinet construction Precision face frame hinge with true Euro hinge function small gaps Suitable for overlays from 26mm 29mm ( 1-1/32 to 1-1/8) Screw-on cup (48mm spread) only For door thickness 5/8 to 3/4 Uses #6 x 5/8 flat head for hinge cup fastening and #8 x 3/4 pan head for base plate to face frame (see page -53 for screws) Packing: 125 hinges per box. Sold In: oth broken and full box quantities. Discount available for full box orders. Minimum Reveal Dimensions Door Closed 2 Overall Dimensions Overlay acc 140 hinge Screw-On Cup 48mm 1-1/32 to 1-1/8 GF276.743.59.9215 1 1. Side Adjustment 2. Height Adjustment - 6 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!
standard application hinges 94 DEGREE self-closing & free swinging Full, Half Overlay & Inset Salice 200 Series hinges are designed for use in both residential and commercial cabinets Series 200 hinges exceed ANSI/HMA Grade 2 standards and meet ISO9001 and ISO14001 environmental certifications All steel hinge is nickel plated for corrosion resistance and is permanently self lubricating utilizing environmentally safe lubricants and has a lifetime warranty 200 Series 94 degree opening hinges have: - Cup depth of only 11mm making the hinge compatible with most cabinet door profiles - Hinge cup edge drilling distance of 3mm to 8mm - Patented parallel side-to-side adjustment of +4.5mm to -1.5mm via hinge arm screw Available in four cup fastening designs: Screw-on with two #6 x 5/8 screws (not included), Press-in dowels, Rapido cam lock dowel and Logica tool free lever activated expanding dowels Available in self-closing and free swinging versions Series 200 hinges are compatible with Smove soft-close devices on pages -50 to -51 Series 200 hinges are designed to work with all Salice mounting plates described on pages -44 to -46 Packing: Full box quantity of 50 each. Sold in: oth broken and full box quantities. Discount available for full box orders. Full Overlay D = (15 + K) - H Close Type Screw-on Cup Press-in Dowel Cup Cam Lock Rapido Tool Free Logica full overlay hinges 45mm Self-Closing UC2P7A99 UC2R7A99 UC277A99 UC2J7A99 45mm Free Swinging UC2P5A99 UC2R5A99 - - half (3/8 ) overlay hinges 45mm Self-Closing UC2P7G99 UC2R7G99 UC277G99 UC2J7G99 45mm Free Swinging UC2P5G99 UC2R5GA99 - - inset hinges 45mm Self-Closing UC2P7P99 UC2R7P99 UC277P99 UC2J7P99 45mm Free Swinging UC2P5P99 UC2R5P99 - - Half (3/8 ) Overlay D = (6 + K) - H Full Overlay Arm Half (3/8 ) Overlay Arm Inset D = (-2 + K) - H Key: S = Thickness of the cabinet side D = Required door overlay T = Door thickness K = Drilling distance A = Reveal L = Gap between door and carcase H = Height of mounting plate G = Hinge constant - Full overlay = 15 1/2 overlay = 10 Half (3/8 ) overlay = 6 Inset = -2 Inset Arm 800-UY-AER (289-2237) www.baersupply.com Fax: 888-558-2237-7
standard application hinges 110 degree self-closing & Free swinging Full, Half Overlay & Inset Grass America s Nexis & Nexis Impresso (tool-less cabinet door fastening design) hinges are designed for frameless and face frame cabinets Nexis 110 degree opening hinges have: - Cup depths of 11mm (Nexis) and 11.5mm (Nexis Impresso) - Hinge cup edge drilling distance of 3mm to 7mm - Single screw side-to-side adjustment of +1mm to -3mm - patterns of 42mm, 45mm and 48mm Available in three cup fastening designs: Screw-on with two #6 x 5/8 screws (not included), Doweled and Tool-less Impresso Screw-on and Doweled hinges feature stamped steel cup, Nexis Impresso tool-less Impresso hinges feature die-cast steel cup and closing flap with all metal construction for positive and secure attachment to cabinet door Available in self-closing and free swinging versions Nexis hinges are compatible with Nexis hinge soft-closing adapters shown on pages -48 to -49 Nexis hinges are designed to work with the Grass mounting plates shown on pages -39 to -41 Packing: Hinges come in full boxes of 250 or 125 as shown below. Sold In: oth broken and full box quantities. Discount available for full box orders. Close Type Full ox Qty: 250 Doweled Cup Full ox Qty: 250 Cup Dimensions Tool less (Impresso) Full ox Qty: 125 FULL OVERLAY HINGES 42mm Self-Closing GF138.322.73.0015 GF138.322.74.0015 GF138.622.50.0015 45mm Self-Closing GF148.322.53.0015 GF148.322.54.0015-45mm Free Swinging GF147.322.53.0015 GF147.322.54.0015-48mm Self-Closing GF146.322.53.0015 GF146.322.54.0015 GF146.622.35.0015 Half Overlay Hinges 42mm Self-Closing GF138.322.73.0815 GF138.322.74.0815 GF138.622.50.0815 45mm Self-Closing GF148.322.53.0815 GF148.322.54.0815-45mm Free Swinging GF147.322.53.0815 GF147.322.54.0815-48mm Self-Closing GF146.322.53.0815 GF146.322.54.0815 GF146.622.35.0815 inset hinges 42mm Self-Closing GF138.304.73.1515 GF138.304.74.1515 GF138.604.51.1515 45mm Self-Closing GF148.304.53.1515 GF148.304.54.1515-45mm Free Swinging GF147.304.53.1515 GF147.304.54.1515-48mm Self-Closing GF146.304.55.1515 GF146.304.56.1515 GF146.604.50.1515 Nexis NOTE: GF138.622.50.0015 - fits 12mm & 45mm boring patterns. GF146.622.35.0015 - fits 45mm & 48mm boring patterns. Full Overlay Half Overlay Inset - 8 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!
standard application hinges 110 DEGREE SELF-CLOSING & FREE SWINGING HINGES Full, 1/2, Half Overlay & Inset Salice Series 200 hinges are designed for use in both residential and commercial cabinets and have a lifetime warranty Series 200 hinges exceed ANSI/HMA Grade 2 standards and meet ISO9001 and ISO14001 environmental certifications All steel hinge is nickel plated for corrosion resistance and is permanently self lubricating utilizing environmentally safe lubricants 200 Series 110 degree opening hinges have: - Cup depth of only 11mm making the hinge compatible with most cabinet door profiles - Hinge cup edge drilling distance of 3mm to 6mm - Patented parallel side-to-side adjustment of +4.5mm to -1.5mm via hinge arm screw Available in four cup fastening designs: Screw-on with two #6 x 5/8 screws (not included), Press-in dowels, Rapido cam lock dowel and Logica tool free lever activated expanding dowels Available in self-closing and free swinging versions Series 200 hinges are compatible with Smove soft-close door devices illustrated on page -50 to -51 Series 200 hinges are designed to work with all Salice mounting plates described on pages -44 to -46 Also available with Silentia: Integrated soft close action (see page -34) Packing: Full box quantity of 50. Sold in: oth broken and full box quantities. Discount available for full box orders. Press-in Dowel Cup Cam Lock Rapido Cup Tool Free Logica Cup full overlay hinges 45mm Self-Closing UC2P6A99 UC2R6A99 UC276A99 UC2J6A99 45mm Free Swinging UC2P4A99 UC2R4A99 - - 1/2 overlay hinges 45mm Self-Closing UC2P6D99 UC2R6D99 UC276D99 UC2J6D99 45mm Free Swinging UC2P4D99 UC2R4D99 - - half (3/8 ) overlay hinges 45mm Self-Closing UC2P6G99 UC2R6G99 UC276G99 UC2J6G99 45mm Free Swinging UC2P4G99 UC2R4G99 - - inset hinges 45mm Self-Closing UC2P6P99 UC2R6P99 UC276P99 UC2J6P99 45mm Free Swinging UC2P4P99 UC2R4P99 - - Key: S = Thickness of the cabinet side D = Required door overlay T = Door thickness K = Drilling distance A = Reveal L = Gap between door and carcase H = Height of mounting plate G = Hinge constant - Full overlay = 15 1/2 overlay = 10 Half (3/8 ) overlay = 6 Inset = -2 Full 1/2 Half (3/8 ) Inset Overlay D = (15 + K) - H Overlay D = (10 + K) - H Overlay D = (6 + K) - H D = (-2 + K) - H 800-UY-AER (289-2237) www.baersupply.com Fax: 888-558-2237-9
standard application hinges 110 Degree self-closing hinges Full, Half Overlay & Inset Lama hinges are manufactured in Europe and are economically priced Lama hinges are ANSI/IFMA tested and have a Lifetime warranty Lama hinges are available in two depth adjustment types: ST+ version which has +/-1.5mm of depth adjustment via a cam on the hinge arm and the ST version which has +5, -1.5mm of depth adjustment via manually loosening an affixing screw Lama 110 degree opening hinges have: - Cup depth of 11.5mm - Hinge cup edge drilling distance of 3mm to 5mm - 42mm and 45mm boring patterns - Three cup fastening designs: screw-on, knock-in 8mm doweled and Easy Fix three quarter turn expanding dowel See page -47 for Lama hinge mounting plates Packing: 200 hinges per box. Sold In: oth broken and full box quantities. Discount available for full box orders. ST + HINGES with cam depth adjustment Close Type Full ox Qty: 200 Full ox Qty: 200 Easy Fix Cup Full ox Qty: 200 Full overlay hinges 45mm Self-Closing TT248.0T10.050 TT248.0T13.050 TT248.0T69.050 half overlay hinges 45mm Self-Closing TT248.0V69.050 TT248.0V70.050 TT248.0V56.050 ST HINGES with manual screw depth adjustment Close Type Full ox Qty: 200 Full ox Qty: 200 Easy Fix Cup Full ox Qty: 200 Full overlay hinges 45mm Self-Closing TT248.0535.050 TT248.0171.050 TT248.0186.050 42mm Self-Closing - TT248.0U70.050 - half overlay hinges 45mm Self-Closing - TT248.0279.050 TT248.0482.050 inset hinges 45mm Self-Closing TT248.0537.050 TT248.0280.050 TT248.0487.050 Full Overlay Half Overlay Inset Plate X K Plate Plate X 37 61.5 K Plate X Plate Screw-on Doweled & Easy Fix Doweled 37 61.5 D=Plate F insertion ram Description ox Qty For 110 and 125 TTLARM-110 1 X = Desired overlay in MM D = Height of base plate in MM K = Hinge cup drilling distance - 10 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!
standard Application HINGES 110 degree heavy duty self-closing & Free swinging hinges Full Overlay & Half Overlay Grass 3000 Series hinges are widely regarded as the strongest concealed hinges in the industry The 3000 Series 110 degree opening is ideal for store fixtures, office, high usage and other demanding applications All metal construction - moving parts are constructed of hardened steel for durability Grass 3000 Series 110 degree opening hinges have: - Cup depth of 12.8mm - Hinge cup edge drilling distance of 3mm to 6mm - Three dimensional adjustment built into hinge arm provides +/-2mm side-to-side, depth and height adjustment - pattern of 42mm Available in three cup fastening designs: Screw-on with two #6 x 5/8 screws (not included), Doweled for machine insertion and Multi-Lock, quarter turn expanding dowels for quick and efficient insertion and removal of hinge to/from door Available in self-closing and free swinging versions Grass 3000 Series hinges are designed to work with the mounting plates illustrated on page -42 Packing: Hinges come in full boxes of 50. Sold In: oth broken and full box quantities. Discount available for full box orders. Full Overlay Full ox Qty: 50 Full ox Qty: 50 Multi-Lock Full ox Qty: 50 FULL OVERLAY HINGES 42mm Self-Closing GF79839-34 GF70039-34 GF28989-34 42mm Free Swinging - GF11157-34 - Half Overlay Hinges 42mm Self-Closing GF55411-34 GF55413-34 GF28990-34 42mm Free Swinging - GF55414-34 - Half Overlay Cover Caps Description ox Qty lack Cover Caps - Full Overlay GF12350 50 lack Cover Caps - Half Overlay GF55409 50 Hinge Adjustments 1 Side Adjustment...+/-2mm 2 Depth Adjustment...+2mm 3 Height Adjustment...+/-2mm Note: Use a POZI drive screwdriver for hinge adjustments. Fastening screws: #6 x 5/8 FHP 800-UY-AER (289-2237) www.baersupply.com Fax: 888-558-2237-11
standard application hinges 120 DEGREE SELF-CLOSING & Free swinging HINGES Full, 1/2 & Half Overlay Salice Series 200 hinges are designed for use in both residential and commercial cabinets and have a lifetime warranty Series 200 hinges exceed ANSI/HMA Grade 2 standards and meet ISO9001 and ISO14001 environmental certifications All steel hinge is nickel plated for corrosion resistance and is permanently self lubricating utilizing environmentally safe lubricants 200 Series 120 degree opening hinges have: - Cup depth of only 11mm making the hinge compatible with most cabinet door profiles - Hinge cup edge drilling distance of 3mm to 6mm - Patented parallel side-to-side adjustment of +4.5mm to -1.5mm via hinge arm screw Available in four cup fastening designs: Screw-on with two #6 x 5/8 screws (not included), Press-in dowels, Rapido cam lock dowel and Logica tool free lever activated expanding dowels Available in self-closing and free swinging versions Series 200 hinges are designed to work with all Salice mounting plates described on pages -44 to -44 Series 200 hinges are compatible with Smove soft-close devices illustrated on page -50 to -51 Packing: Full box quantity of 50. Sold in: oth broken and full box quantities. Discount available for full box orders. Screw-on Cup Press-in Cam Lock Rapido Cup Tool Free Logica Cup full overlay hinges 45mm Self-Closing UC2P9A99 UC2R9A99 UC279A99 UC2J9A99 45mm Free Swinging UC2P8A99 UC2R8A99 - - 1/2 overlay hinges 45mm Self-Closing UC2P9D99 UC2R9D99 UC279D99 UC2J9D99 45mm Free Swinging UC2P8D99 UC2R8D99 - - Half (3/8 ) overlay hinges 45mm Self-Closing UC2P9G99 UC2R9G99 UC279G99 UC2J9G99 45mm Free Swinging UC2P8G99 UC2R8G99 - - Key: S = Thickness of the cabinet side D = Required door overlay T = Door thickness K = Drilling distance A = Reveal L = Gap between door and carcase H = Height of mounting plate G = Hinge constant - Full overlay = 15 1/2 overlay = 10 Half (3/8 ) overlay = 6 Inset = -2 Full Overlay 1/2 Overlay Half (3/8 ) Overlay D = (15 + K) - H D = (10 + K) - H D = (6 + K) - H - 12 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!
standard application hinges 120 degree heavy duty self-closing hinges Full & Half Overlay The Grass 3000 Series hinges are widely regarded as the strongest concealed hinges in the industry The 3000 Series 120 degree opening hinges are ideal for store fixtures, office, high usage and other demanding applications All metal construction - moving parts are constructed of hardened steel for durability Grass 3000 Series 120 degree opening hinges have: - Cup depths of 12.8mm - Hinge cup edge drilling distance of 3mm to 5mm - Three dimensional adjustment built into hinge arm provides +/-2mm side-to-side, depth and height adjustment - pattern of 42mm Available in three cup fastening designs: Screw-on with two #6 x 5/8 screws (not included), Doweled for machine insertion and Multi-Lock, quarter turn expanding dowels for quick and efficient insertion and removal of hinge to/from door Grass 3000 Series hinges are designed to work with the mounting plates on -42 Available in self-closing and free swinging versions Packing: Hinges come in full boxes of 50. Sold In: oth broken and full box quantities. Discount available for full box orders. Full Overlay Full ox Qty: 50 Full ox Qty: 50 Multi-Lock Full ox Qty: 50 FULL OVERLAY HINGES 42mm Self-Closing GF79840-34 GF70042-34 GF28992-34 Half Overlay Hinges 42mm Self-Closing GF12634-34 GF12638-34 - 9.9 Cover Caps Description ox Qty lack Cover Caps - Full Overlay GF12350 50 lack Cover Caps - Half Overlay GF55409 50 Half Overlay Hinge Adjustments 1 Side Adjustment...+/-2mm 2 Depth Adjustment...+2mm 3 Height Adjustment...+/-2mm Note: Use a POZI drive screwdriver for hinge adjustments. Fastening screws: #6 x 5/8 FHP 18.2 800-UY-AER (289-2237) www.baersupply.com Fax: 888-558-2237-13
standard application hinges 125 degree self-closing hinges Full & Half Overlay Grass Nexis and Nexis Impresso (tool-less cabinet door fastening design) hinges with 125 degree opening angle offer an alternative for wide angle applications suitable for frameless and face frame applications For door thickness up to 19mm (3/4 ) Nexis 125 degree opening hinges have: - Cup depths of 11.8mm (Nexis) and 12mm (Nexis Impresso) - Hinge cup edge drilling distance of 3mm to 6mm - Single screw side-to-side adjustment of +1mm to -3mm - patterns of 42mm and 45mm Available in three cup fastening designs: Screw-on with two #6 x 5/8 screws (not included), Doweled and Tool-less Impresso Screw-on and Doweled hinges feature stamped steel cup. Tool-less Impresso hinges feature die-cast steel cup and closing flap with all metal construction for positive and secure attachment to cabinet door Available in self-closing only Nexis hinges are compatible with the soft-close devices illustrated on page -48 to -49 Full Overlay Nexis hinges are designed to work with the Grass mounting plates on -39 to -41 Packing: Hinges come in full boxes of 250. Sold In: oth broken and full box quantities. Discount available for full box orders. Full ox Qty: 250 Full ox Qty: 250 Tool-less (Impresso) Full ox Qty: 250 FULL OVERLAY HINGES 42mm Self-Closing GF138.329.73.0015 GF138.329.74.0015-45mm Self-Closing - GF148.329.32.0015-42/45mm Self-Closing - - GF138.629.50.0015 45/48mm Self-Closing - - ME146.629.50.0015 48mm Self-Closing ME146.329.55.0015 ME146.329.56.0015 - Half Overlay Hinges 42mm Self-Closing GF138.329.73.0815 GF138.329.74.0815-45mm Self-Closing - GF148.329.32.0815-42/45mm Self-Closing - - GF138.629.50.0815 45/48mm Self-Closing ME146.629.35.0815 48mm Self-Closing - ME146.329.56.0815 - Cover Caps Description ox Qty Steel, Nickel Plated - Full Overlay GF514.300.21.0215 1,000 Steel, Nickel Plated - Half Overlay GF514.300.22.0015 1,000 NOTE: GF138.629.50.0015 - fits 45mm & 48mm boring patterns. Half Overlay - 14 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!
standard application hinges 125 degree self-closing hinges Full Overlay Lama hinges from Titus are manufactured in Europe and are economically priced Lama hinges are ANSI/IFMA tested and have a lifetime warranty Lama hinge ST+ version which has +/-1.5mm of depth adjustment via a cam on the hinge arm Lama 125 degree opening hinges have: - Cup depth of 12.5mm - Hinge cup edge drilling distance of 3mm to 5mm - 45mm boring patterns - Three cup fastening designs: Screw-on, Knock-in 8mm Doweled and Easy Fix three quarter turn expanding dowels See page -47 for Lama hinge mounting plates Packing: Full box quantity of 200. Sold In: oth broken and full box quantities. Discount available for full box orders. ST + HINGES with cam depth adjustment Close Type Full ox Qty: 200 Full ox Qty: 200 Easy Fix Cup Full ox Qty: 200 Full overlay hinges 45mm Self-Closing TT248.0U85.050 TT248.0U84.050 TT248.0U86.050 Full Overlay Plate Screw-on Doweled & Easy Fix K X D=Plate insertion ram Description ox Qty For 110 and 125 TTLARM-110 1 X = Desired overlay in MM D = Height of base plate in MM K = Hinge cup drilling distance For Wooden Doors Adjustments Side Adjustment +3/-1mm Height Adjustment +2/-2mm Depth Adjustment +1.5/-1.5mm 800-UY-AER (289-2237) www.baersupply.com Fax: 888-558-2237-15
standard application hinges 165 DEGREE SELF-CLOSING & FREE SWINGING Full, 1/2, Half Overlay & Inset Salice Series 200 hinges are designed for use in both residential and commercial cabinets and have a Lifetime warranty Series 200 hinges exceed ANSI/HMA Grade 2 standards and meet ISO9001 and ISO14001 environmental certifications All steel hinge is nickel plated for corrosion resistance and is permanently self lubricating utilizing environmentally safe lubricants 200 Series 165 degree opening hinges have: - Cup depth of only 11mm making the hinge compatible with most cabinet door profiles - Hinge cup edge drilling distance of 3mm to 9mm - Patented parallel side-to-side adjustment of +4.5mm to -1.5mm via hinge arm screw Available in four cup fastening designs: Screw-on with two #6 x 5/8 screws (not included), Press-in dowels, Rapido cam lock dowel and Logica tool free lever activated expanding dowels Available in self-closing and free swinging versions Series 200 hinges are designed to work with all Salice mounting plates described on pgs. -44 - -46 Series 200 hinges are compatible with the Smove soft-close devices illustrated on page -50 - -51 Packing: Full box quantity of 50. Sold in: oth broken and full box quantities. Discount available for full box orders. Full Overlay D = (15 + K) - H 165 DEGREE 200 SERIES HINGE Screw-on Cup Press-in Dowel Cup Cam Lock Rapido Cup Tool Free Logica Cup 1/2 Overlay D = (10 + K) - H full overlay hinges 45mm Self-Closing UC2PFA99 UC2RFA99 UC27FA99 UC2JFA99 45mm Free Swinging UC2PEA99 UC2REA99 - - 1/2 overlay hinges 45mm Self-Closing UC2PFD99 UC2RFD99 UC27FD99 UC2JFD99 45mm Free Swinging UC2PED99 UC2RED99 - - half (3/8 ) overlay hinges 45mm Self-Closing UC2PFG99 UC2RFG99 UC27FG99 UC2JFG99 45mm Free Swinging UC2PEG99 UC2REG99 - - inset hinges 45mm Self-Closing UC2PFP99 UC2RFP99 - UC2JFP99 Half (3/8 ) Overlay D = (6 + K) - H 155 Zero Protrusion Hinge Note: This hinge will produce Zero door protrusion when used in a full overlay application only. - 16 155 DEGREE ZERO PROTRUSION HINGE full overlay hinges Press-in Self-Closing UC2PMA99 UC2RMA99 Key: S = Thickness of the cabinet side D = Required door overlay T = Door thickness K = Drilling distance A = Reveal L = Gap between door and carcase H = Height of mounting plate G = Hinge constant - Full overlay = 15 1/2 overlay = 10 Half (3/8 ) overlay = 6 Inset = -2 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY! Inset D = (-2 + K) - H
standard application hinges 165 degree heavy duty self-closing & free swinging Full & Half Overlay Grass 3000 Series hinges are ideal for store fixtures, office, high usage and other demanding applications All metal construction - moving parts are constructed of hardened steel for durability Accommodates overlays up to 22mm (7/8 ) and doors up to 22mm (7/8 ) thick Larger overlays up to 29mm (1-1/8 ) are possible when using the 135 degree restrictive clip Zero protrusion in full overlay applications - allows for pullouts without blocking Grass 3000 Series 165 opening hinges have: - Cup depths of 12.8mm - Hinge cup edge drilling distance of 3mm to 6mm - Three dimensional adjustment built into hinge arm provides +/-2mm side-to-side, depth and height adjustment - pattern of 42mm Available in two cup fastening designs: Screw-on with two #6 x 5/8 screws (not included) and Doweled for machine insertion Available in self-closing and free swinging versions 3000 Series hinges are designed to work with the Grass mounting plates on page -41 Packing: Hinges and cover caps come in full boxes of 50. Angle reduction clip comes in boxes of 100. Sold In: oth broken and full box quantities. Discount available for full box orders. Full ox Qty: 50 Full ox Qty: 50 FULL OVERLAY HINGES 42mm Self-Closing GF90110-33 GF09897-33 42mm Free Swinging - GF11154-33 Half Overlay Hinges 42mm Self-Closing GF18503-33 GF18504-33 angle Reduction clip - 135 degree Description ox Qty 135 Degree Angle Reduction Clip GF11590-42 100 Hinge Adjustments 1 Side Adjustment...+/-2mm 2 Depth Adjustment...+2mm 3 Height Adjustment...+/-2mm Note: Use a POZI drive screwdriver for hinge adjustments. Fastening screws: #6 x 5/8 FHP Cover Caps Description ox Qty lack Cover Caps GF89271-41 50 Full Overlay Half Overlay 800-UY-AER (289-2237) www.baersupply.com Fax: 888-558-2237-17
standard application hinges 170 degree self-closing & free swinging Full & Half Overlay Grass Nexis and Nexis Impresso (tool-less cabinet door fastening design) hinges with 170 degree opening angle for wide angle applications in frameless and face frame cabinets Commonly used in corner or lazy susan applications along with a pie cut hinge Zero protrusion when opened at 90 degree excellent minimum gap and reveal Use with restrictive clip (described below) for special applications- lipped doors, and mitered corners Nexis 170 degree opening hinges have: - Cup depth of 11mm - Hinge cup edge drilling distance of 3mm to 10mm - Single screw side-to-side adjustment of +1mm to -3mm - patterns of 42mm and 45mm Available in three cup fastening designs: Screw-on with #6 x 5/8 screws (not included), Doweled and Tool-less Impresso Screw-on and Doweled hinges feature stamped steel cup. Tool-less Impresso hinges feature die-cast steel cup and closing flap with all metal construction for positive and secure attachment to cabinet door Available in self-closing and free swinging versions Full Overlay Nexis hinges are compatible with soft-closing devices illustrated on page -48 to -49 Nexis hinges are designed to work with the mounting plates on pages -39 to -41 Packing: Full box quantity of 50. NOTE: (*) SPECIAL ORDER Sold In: oth broken and full box quantities. Discount available for full box orders Full ox Qty: 50 Full ox Qty: 50 Tool-less (Impresso) Full ox Qty: 50 FULL OVERLAY HINGES 42mm Self-Closing GF138.765.73.0015 GF138.765.74.0015-45mm Self-Closing - GF148.765.54.0015-45mm Free Swinging GF147.765.53.0015* - - 42/45mm Self-Closing - - GF138.765.65.0015 45/48mm Self-Closing 48mm Self-Closing - ME146.765.54.0015 ME146.765.65.0015 Half Overlay Hinges 42mm Self-Closing GF138.765.73.0815* GF138.765.74.0815-45mm Self-Closing - GF148.765.54.0815-45mm Free Swinging GF147.765.53.0815* - - 42/45mm Self-Closing - - GF138.765.65.0815 45/48mm Self-Closing - - ME146.765.35.0815 48mm Self-Closing - ME146.765.54.0815 - angle Reduction clip - 120 degree Description ox Qty Restricts opening angle for special applications GF641.000.09.0062 2,500 Half Overlay - 18 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!
standard application hinges 170 degree self-closing hinges Full Overlay Lama hinges from Titus are manufactured in Europe and are economically priced Lama hinges are ANSI/IFMA tested and have a lifetime warranty Lama ST version hinges have +5, -1.5mm or depth adjustment via manually loosening an affixing screw on the hinge arm Lama ST series 170 degree hinges offers zero protrusion in the 90 and 165 degree opening angles when used with a 0mm plate Lama 170 degree opening hinges have: - Cup depth of 12mm - Hinge cup edge drilling distance of 3mm to 5mm - 45mm boring patterns - Three cup fastening designs: screw-on, knock-in 8mm doweled and Easy Fix three quarter turn expanding dowel See page -47 for Lama hinge mounting plates Packing: 50 hinges per box. Sold In: oth broken and full box quantities. Discount available for full box orders. Full Overlay Plate ST HINGES with manual screw depth adjustment Close Type Full ox Qty: 50 Full ox Qty: 50 Easy Fix Cup Full ox Qty: 50 Full overlay hinges 45mm Self-Closing TT248.0R14.050 TT248.0M73.050 TT248.0S17.050 X K Screw-on Dowel & Easy Fix D=Plate X = Desired overlay in MM D = Height of base plate in MM K = Hinge cup drilling distance For Wooden Doors 170 Degrees Adjustments Side Adjustment +3/-1mm Height Adjustment +2/-2mm Depth Adjustment +1.5/-1.5mm 800-UY-AER (289-2237) www.baersupply.com Fax: 888-558-2237-19
specialty application hinges 94 DEGREE thick door hinges - up to 1-1/2 thick 40mm Hinge Cup - Full, Half Overlay & Inset Salice Series F thick door hinges are the perfect solution for overlay pocket doors Can be used for doors up to 1-1/2 (38mm) thick while maintaining minimal gaps between doors Large overlays possible: up to 1 3/8 (34mm) Exceeds ANSI/HMA grade 2 standards and is ISO 9001 and ISO 14001 (Environmental) certified Series F 94 degree opening thick door hinges have: - Cup depth of only 13mm - Hinge cup edge drilling distance of 3mm to 15mm - Patented parallel side-to-side adjustment of +5.5mm to -0.5mm via hinge arm screw Available in Screw-on via two #6 x 5/8 screws cup fastening design (screws not included) Available in self-closing and free swinging versions Series F hinges are designed to work with all Salice mounting plates described on pages -44 to -46 Series F hinges are compatible with the Smove soft-close devices illustrated on pages -50 to -51 Packing: Full box quantity of 50. Sold in: oth broken and full box quantities. Discount available for full box orders. Full Overlay Full Overlay D = (19 + K) - H full overlay hinges 52mm Self-Closing UCFA7A99 52mm Free Swinging UCFA5A99 half (3/8 ) overlay hinges 52mm Self-Closing UCFA7G99 52mm Free Swinging UCFA5G99 inset hinges 52mm Self-Closing UCFA7P99 52mm Free Swinging UCFA5P99 Half (3/8 ) Overlay Half (3/8 ) Overlay D = (8 + K) - H Fabrication Note: To achieve the tightest gap possible between two doors, when using any Salice THICK DOOR hinge, it is recommended to also utilize the largest edge drilling distance and thickest mounting plate combination for the desired overlay. Please refer to Salice technical catalog for details. Inset Inset D = (-3 + K) - H - 20 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!
specialty application hinges 94 & 155 DEGREE THICK DOOR HINGES - up to 1-1/4 thick 35mm Hinge Cup - Full, 1/2, Half Overlay & Inset Salice Series 200 thick door hinges are designed for use in both residential and commercial cabinets and have a Lifetime warranty Series 200 hinges exceed ANSI/HMA Grade 2 standards and meet ISO9001 and ISO14001 environmental certifications All steel hinge is nickel plated for corrosion resistance and is permanently self lubricating utilizing environmentally safe lubricants Suitable for doors up to 1-1/4 thick while maintaining minimal gaps between doors Large overlays possible: up to 24mm 200 Series 94 and 155 degree opening thick door opening hinges have: - Cup depths of only 11mm making the hinge compatible with most cabinet door profiles - Hinge cup edge drilling distance of 3mm to 9mm - Patented parallel side-to-side adjustment of +4.5mm to -1.5mm via hinge arm screw Available in two cup fastening designs: Screw-on with two #6 x 5/8 screws (not included) and Press-in dowels 94 Series 200 Hinge Available in self-closing only Series 200 hinges are designed to work with all Salice mounting plates described on pages -44 to -46 Series 200 hinges are compatible with the Smove soft-close devices illustrated on pages -50 to -51 Packing: Full box quantity of 100. Sold in: oth broken and full box quantities. 155 Series 200 Hinge Discount available for full box orders. Full Overlay 1/2 Overlay D = (15 + K) - H D = (10 + K) - H 94 DEGREE hinge for thick doors Screw-on Cup Press-in full overlay hinges 45mm Self-Closing UC2PA99 UC2RA99 1/2 overlay hinges 45mm Self-Closing UC2PD99 UC2RD99 half (3/8 ) overlay hinges 45mm Self-Closing UC2PG99 UC2RG99 inset hinges 45mm Self-Closing UC2PP99 UC2RP99 155 DEGREE hinge for thick doors Screw-on Cup Press-in full overlay hinges 45mm Self-Closing UC2PDA99 UC2RDA99 1/2 overlay hinges 45mm Self-Closing UC2PDD99 UC2RDD99 half (3/8 ) overlay hinges 45mm Self-Closing UC2PDG99 UC2RDG99 Key: S = Thickness of the cabinet side D = Required door overlay T = Door thickness K = Drilling distance A = Reveal L = Gap between door and carcase H = Height of mounting plate G = Hinge constant - Full overlay = 15 1/2 overlay = 10 Half (3/8 ) overlay = 6 Inset = -2 Half (3/8 ) Overlay Inset D = (6 + K) - H D = (-2 + K) - H Fabrication Note: To achieve the smallest gap possible between two doors, when using any Salice THICK DOOR hinge, it is recommended to also utilize the largest edge drilling distance and thickest mounting plate combination for the desired overlay. Please refer to Salice technical catalog for details. 800-UY-AER (289-2237) www.baersupply.com Fax: 888-558-2237-21
specialty application hinges 95 degree thick door hinges - Up to 1-3/16 Thick Full, Half Overlay & Inset Grass Nexis and Nexis Impresso (tool-less cabinet door fastening designs) hinges with 95 degree opening for thick doors or doors with applied mouldings and profiles are suitable for frameless and face frame applications For door thickness up to 30mm (1-3/16 ) and overlays up to 19mm (3/4 ) Nexis 95 degree opening thick door hinges have: - Cup depths of 11.8mm (Nexis) and 12mm (Nexis Impresso) - Hinge cup edge drilling distance of 3mm to 6mm - Single screw side-to-side adjustment of +1mm to -3mm - patterns of 42mm, 45mm and 48mm Available in three cup fastening designs: Screw-on with two #6 x 5/8 screws (not included), Doweled and Tool-less Impresso Screw-on and Doweled hinges feature stamped steel cup. Tool-less Impresso hinges feature die-cast steel cup and closing flap with all metal construction for positive and secure attachment to cabinet door Available in self-closing and free swinging versions Full Overlay Nexis hinges are compatible with the soft-close devices illustrated on page -48 to -49 Nexis hinges are designed to work with the mounting plates on pages -39 to -41 Packing: Hinges come in full box quantities of 250 or 125 as shown below. Sold In: oth broken and full box quantities. Discount available for full box orders Full ox Qty: 250 Full ox Qty: 250 Tool-less (Impresso) Full ox Qty: 125 FULL OVERLAY HINGES 42mm Self-Closing GF138.305.73.0015 GF138.305.74.0015-45mm Self-Closing ME148.305.53.0015 GF148.305.54.0015-42/45mm Self-Closing - - GF138.605.51.0015 48mm Free Swinging GF145.305.53.0015 - - 48mm Self-Closing ME146.305.53.0015 - ME146.605.50.0015 Half Overlay Hinges 42mm Self-Closing GF138.305.73.0815 GF138.305.74.0815-45mm Self-Closing - GF148.305.54.0815-42/45mm Self-Closing - - GF138.605.51.0815 45/48mm Self-Closing - - ME146.605.50.0815 inset Hinges 42mm Self-Closing GF138.305.73.1515 GF138.305.74.1515-45mm Self-Closing ME148.305.53.1515 GF148.305.54.1515-42/45mm Self-Closing - - GF138.605.51.1515 45/48mm Self-Closing - - ME146.605.50.1515 Half Overlay Inset Cover Caps Description ox Qty Steel, Nickel Plated - Full Overlay GF514.300.21.0215 1,000 Steel, Nickel Plated - Half Overlay GF514.300.22.0015 1,000-22 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!
specialty application hinges 95 degree profile door hinges - up to 1-7/16 thick 40mm Cup for Profile Doors & Large Overlay Grass Nexis Hinges with 95 degree opening for thick doors or doors with applied mouldings and profiles are suitable for frameless and face frame applications Stamped steel arm and die-cast steel hinge cup with bright nickel finish Excellent weight capacity for heavy doors, special spring mechanism ensures excellent closing force with large doors Minimal gap dimensions on thick doors For door thickness up to 36mm (1-7/16 ) and overlays up to 23mm (7 / 8 ) Nexis hinges for profile and large overlay doors have: - Cup depths of 13.2mm - Hinge cup edge drilling distance of 3mm to 10mm - Single screw side-to-side adjustment of +1mm to -3mm - of 40mm Available in Screw-on with two #6 x 5/8 screws (not included), cup fastening design Nexis hinges are compatible with the soft-close devices illustrated on page -48 to -49 Nexis hinges are designed to work with the mounting plates on pages -39 to -41 Packing: Hinges come in full box quantity of 125. Sold In: oth broken and full box quantities. Discount available for full box orders Full ox Qty: 125 FULL OVERLAY HINGES 40mm Self-Closing GF146.425.53.0015 40mm Cup Hole 110 DEGREE PROFILE DOOR HINGES Full Overlay, Half Overlay & Inset (Single Hinge For All 3 Applications) Salice Series 110 degree profile door hinges are designed to work with special profile cabinet doors and are ideal for 3/8 lip doors, miter doors and radius edge doors Series hinges exceed ANSI/HMA Grade 2 standards and meet ISO9001 and ISO14001 environmental certifications All steel hinge is nickel plated for corrosion resistance is permanently self lubricating utilizing environmentally safe lubricants and has a lifetime warranty Series 110 degree profile door hinges have: - Cup depth of only 9mm making the hinge compatible with most narrow door profiles - Hinge cup edge drilling distance of 3mm to 18mm - Patented parallel side-to-side adjustment of +4.5mm to -1.5mm via hinge arm screw Available in Screw-on with two #6 x 5/8 screws (not included) cup fastening design Available in self-closing only Series hinges are designed to work with all Salice mounting plates described on pages -44 to -46 Series hinges are compatible with Smove soft-close devices on pages -50 to -51 Packing: Full box quantity of 50. Sold in: oth broken and full box quantities. Discount available for full box orders. inset to FULL OVERLAY HINGES 35mm Self-Closing UCP2A99 Series Applications - Special Profile Doors 800-UY-AER (289-2237) www.baersupply.com Fax: 888-558-2237-23
specialty application hinges 95 degree blind corner hinges Post Hinge for lind Corner Cabinets Grass Nexis Impresso hinges with 95 degree opening angle for blind corner applications are suitable frameless and face frame applications Zinc die cast arm and stamped steel cup with bright nickel finish Minimal gap dimensions on door thickness of up to 30mm ( 1-13/16 ) Nexis 95 degree opening blind corner hinges have: - Cup depths of 11.8mm - Hinge cup edge drilling distance of 3mm to 6mm - Single screw side-to-side adjustment of +1mm to -3mm - pattern of 45mm Available in two cup fastening designs: Screw-on with two #6 x 5/8 screws (not included) and Doweled Available in self-closing only Nexis hinges are compatible with the soft-close devices illustrated on page -48 to -49 Nexis hinges are designed to work with the Grass mounting plates on pages -39 to -41 Packing: Hinges come in full box quantities of 125. Sold In: oth broken and full box quantities. Discount available for full box orders Installation Dimensions Clearances Full ox Qty: 125 Full ox Qty: 125 inset HINGES 45mm Self-Closing GF148.405.11.9615 GF148.405.12.9615 95 degree heavy duty/commerical blind corner hinges lind Corner Hinges Grass 3000 Series heavy duty/commercial application, blind corner hinges are designed for flush blind corner applications Door thickness: 16mm (5/8 ) to 22mm (7/8 ) depending on reveal and shape of door. For flush front, door and end panel must be the same thickness Grass 3000 Series blind corner hinges have: - Cup depths of 12.8mm - Hinge cup edge drilling distance of 3mm to 6mm - Three dimensional cam adjustment built into the hinge arm, providing +/-2mm side-to-side, depth and height adjustment - pattern of 42mm Available in two cup fastening designs: Screw-on with two #6 x 5/8 (not included) and Doweled Must be used with GF11704-41 listed below Packing: Full box quantities of 50. Sold In: oth broken and full box quantities. Discount available for full box orders Full ox Qty: 50 Full ox Qty: 50 blind corner hinges 42mm Self-Closing GF11511-33 GF11606-33 SCREW-ON ase plates ox Qty GF11704-41 50-24 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!
specialty application hinges blind corner hinge Inset Lama hinges from Titus are manufactured in Europe and are economically priced Lama hinges are ANSI/IFMA tested and have a lifetime warranty Lama ST version hinges have +/-1.5mm of depth adjustment via manually loosening an affixing screw Lama blind corner hinges have: - Cup depth of 11.5mm - Hinge cup edge drilling distance of 3mm to 6mm - 45mm boring patterns - Two cup fastening designs: screw-on and knock-in 8mm doweled See page -47 for Lama hinge mounting plates Packing: 100 hinges per box. Sold In: oth broken and full box quantities. Discount available for full box orders. Screw-on Knock-on Doweled ST inset HINGES with manual screw depth adjustment Close Type Full ox Qty: 100 Full ox Qty: 100 Full overlay hinges 45mm Self-Closing TT248.0745.650 TT248.0N24.050 pie cut corner hinge Lama hinges from Titus are manufactured in Europe and are economically priced Lama hinges are ANSI/IFMA tested and have a lifetime warranty Lama ST+ version hinges have +/-1.5mm of depth adjustment via a cam on the hinge arm Lama pie cut corner hinges have: - Cup depth of 11.5mm - Hinge cup edge drilling distance of 3mm to 6mm - 45mm boring patterns - Two cup fastening designs: screw-on and knock-in 8mm doweled See page -47 for Lama hinge mounting plates Packing: 100 hinges per box. Sold In: oth broken and full box quantities. Discount available for full box orders. ST inset HINGES with manual screw depth adjustment Close Type Full ox Qty: 100 Full ox Qty: 100 Full overlay hinges 45mm Self-Closing TT248.0U21.050 TT248.0U22.050 800-UY-AER (289-2237) www.baersupply.com Fax: 888-558-2237-25
specialty application hinges pie cut corner hinges Grass America s Nexis & Nexis Impresso (tool-less) pie cut corner hinges are designed to be used in corner cabinet and lazy susan applications Use in conjunction with Nexis 170 opening degree hinges For door thickness of 16mm to 22mm Two distinct designs part numbers GF146.700.01.0015 & GF146.700.02.0015 feature full cup recess which enables user to bore all 4 hinge holes in door with same dimensions and spacing Full cup recess design adds additional adjustment point for door thickness Nexis pie cut corner hinges have: - Cup depths of 10.8mm - Single screw side-to-side adjustment of +1mm to -3mm - of 42mm and 45mm Available in two cup fastening designs: Screw-on with two #6 x 5/8 screws (not included) and Doweled Available in self-closing only Nexis hinges are designed to work with the mounting plates on pages -39 to -41 Packing: Full box quantities of 125. Sold In: oth broken and full box quantities. Discount available for full box orders. pie cut corner HINGES Full ox Qty: 125 Full ox Qty: 125 42mm Self-Closing GFNX21VZ-PCC GFNX21V28-PCC 45mm Self-Closing GF148.700.01.0015 GF148.700.02.0015 pie cut corner hinges - full cup recess 48mm Self-Closing GF146.700.01.0015 GF146.700.02.0015 Pie Cut Corner Hinge Pie Cut with Full Cup Recess Adjustable in the hinge arm 1. Side adjustment +2mm 2. Depth adjustment +2mm 4. Door thickness 14 to 24mm,factory setting 19mm Adjustment via base plate 3. Height adjustment +2mm Pie Cut Hinge with Full Cup Recess pie cut corner hinges Free Swinging Pie Cut Corner Kit Universal design free swing pie cut corner hinge kit includes two hinges, magnetic catch and strike plate Requires a 35mm hole in both door panels- can use any pattern boring machine or drill press Good alternative to non-adjustable and troublesome piano or continuous hinges Used in conjunction with any wide angle hinge Requires #6 x 5/8 screws to mount hinge, and #4 x5/8 screws for catch Sturdy all die-cast construction bright Nickel finish shallow profile will not interfere with lazy susans Adjustable accommodates doors 16mm ( 5/8 ) to 25mm (1 ) in thickness Gap between doors can easily be adjusted height adjustable as well Packing: Poly bag contains two hinges, 1 magnetic catch and 1 striker plate. 50 polybags per box. Sold In: oth broken and full box quantities. Discount available for full box orders. GF13128-37 - 26 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!
specialty application hinges positive & negative angle hinges +/-30 Degree, +/-45 Degree, lind & Pie Cut Corner Hinges Series 200 positive and negative angle hinges are designed for use in both residential and commercial cabinets Series 200 hinges exceed ANSI/HMA Grade 2 standards and meet ISO9001 and ISO14001 environmental certifications All steel hinge is nickel plated for corrosion resistance and is permanently self lubricating utilizing environmentally safe lubricants Series 200 positive and negative degree opening hinges have: - Cup depth of only 11mm making the hinge compatible with most cabinet door profiles - Hinge cup edge drilling distance of 3mm to 6mm - Patented parallel side-to-side adjustment of +4.5mm to -1.5mm via hinge arm screw Available in four cup fastening designs: Screw-on with two #6 x 5/8 screws (not included), Press-in dowels, Rapido cam lock dowel and Logica tool free lever activated expanding dowels Available in self-closing only Series 200 hinges are designed to work with all Salice mounting plates described on pages -44 to -46 Series 200 hinges are compatible with the Smove soft-close devices illustrated on page -50 to -51 Packing: Full box quantity of 150. Sold in: oth broken and full box quantities. Discount available for 50 hinges and full box orders. Positive 30 Angle Press-in Cam Lock Rapido Cup Tool Free Logica Cup Positive 30 degree Angle 45mm Self-closing UC2P7E99 UC2R7E99 UC277E99 UC2J7E99 Negative 30 degree Angle 45mm Self-closing UC2P7W99 UC2R7W99 UC277W99 UC2J7W99 Positive 45 degree Angle 45mm Self-closing UC2P7M99AC UC2R7M99AC UC277M99AC UC2J7M99AC Negative 45 degree Angle 45mm Self-closing UC2P7H99 UC2R7H99 UC277H99 UC2J7H99 lind Corner 45mm Self-closing UC2P7N99AC UC2R7N99AC UC277N99AC UC2J7N99AC overlay blind corner 45mm Self-closing UC2P6N99AM UC2R6N99AM UC2J6N99AM pie cut corner 45mm Self-closing UC2PYA99 UC2RYA99 UC27YA99 - Negative 30 Angle Positive 45 Angle Negative 45 Angle lind Corner Overlay lind Corner Pie Corner Hinge 800-UY-AER (289-2237) www.baersupply.com Fax: 888-558-2237-27
specialty application hinges positive & negative angle hinges -15 Degree, +30 Degree & +/-45 Degree Hinges Lama hinges from Titus are manufactured in Europe and are economically priced Lama hinges are ANSI/IFMA tested and have a Lifetime warranty Lama ST version hinges have +/-1.5mm of depth adjustment via manually loosening an affixing screw Lama positive and negative angle hinges have: - Cup depth of 11.5mm Screw-on - Hinge cup edge drilling distance of 3mm to 6mm - 45mm boring patterns - Two cup fastening designs: screw-on and knock-in 8mm doweled See page -47 for Lama hinge mounting plates Packing: 100 hinges per box. Sold In: oth broken and full box quantities. Discount available for full box orders. Doweled & Easy Fix ST inset HINGES - (+30 degree) Close Type Full ox Qty: 200 Full ox Qty: 100 Full overlay hinges 45mm Self-Closing - TT248.0U22.050 + 30 Degree 3mm Mounting Plate ST inset HINGES - (+45 degree) Close Type Full ox Qty: 100 Full ox Qty: 100 Full overlay hinges 45mm Self-Closing TT248.0285.050 TT248.0N20.050 + 45 Degree 3mm Mounting Plate ST overlay HINGES - (+45 degree) Close Type Full ox Qty: 200 Full ox Qty: 200 Full overlay hinges 45mm Self-Closing - TT248.0N16.050 ST inset HINGES - (-15 degree overlay) Close Type Full ox Qty: 100 Full ox Qty: 200 Full overlay hinges 45mm Self-Closing TT248.0V14.050 - -15 Degree 0mm Mounting Plate - 28 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!
specialty application hinges positive & negative angle hinges +30 Degree and -/+45 Degree Grass America s Nexis & Nexis Impresso (tool-less cabinet door fastening design) angled hinges are designed for frameless and face frame cabinets Nexis positive and negative angle hinges have: - Cup depths of 11.8mm (Nexis) and 12mm (Nexis Impresso) - Hinge cup edge drilling distance of 3mm to 6mm - Single screw side-to-side adjustment of +1mm to -3mm - pattern of 45mm and 48mm Positive angle hinges can be used with doors up to 30mm (1-3/16 ) thick, negative angle hinges can be used with doors up to 19mm (3/4 ) thick Available in three cup fastening designs: Screw-on with two #6 x 5/8 screws (not included), Doweled and Tool-less Impresso Screw-on and Doweled hinges feature stamped steel cup. Tool-less Impresso hinges feature die-cast steel cup and closing flap with all metal construction for positive and secure attachment to cabinet door Available in self-closing only Nexis hinges are compatible with the soft-close devices illustrated on page -48 to -49 Nexis hinges are designed to work with the mounting plates on pages -39 to -41 Packing: Full box quantity of 125. Sold In: oth broken and full box quantities. Discount available for full box orders. Full ox Qty: 125 Full ox Qty: 125 Tool-less (Impresso) Full ox Qty: 125 positive 30 degree angle corner hinges 48mm Self-Closing GF146.405.53.0215 - - negative 45 degree angle corner hinges 45mm Self-Closing GF148.429.53.4515 GF148.429.54.4515-45/48mm Self-Closing - - GF146.729.35.4515 positive 45 degree angle corner hinges 45mm Self-Closing GF148.405.06.0315 GF148.405.08.0315-45/48mm Self-Closing - - GF146.705.35.0315 + 45 Degree Hinge - 45 Degree Hinge +30 Degree Hinge 800-UY-AER (289-2237) www.baersupply.com Fax: 888-558-2237-29
specialty application hinges 95 degree specialty application hinge Positive & Negative 45 Degree Angle Hinges For Heavy Duty Applications Grass 3000 Series, positive and negative 45 degree angle hinges are designed for heavy duty +/- 45 degree corner applications For use with doors 5/8 to 7/8 thick Grass 3000 Series positive and negative 45 degree angle hinges have: - Cup depths of 12.8mm - Hinge cup edge drilling distance of 3mm to 5mm - Three dimensional adjustment built into hinge arm provides +/-2mm side-to-side, depth and height adjustment - pattern of 42mm Available in two cup fastening designs: Screw-on with two #6 x 5/8 screws (not included) and Doweled for machine insertion 3000 Series hinges are designed to work with the mounting plates on -42 Available in self-closing versions Packing: Full box quantity of 50. Sold In: oth broken and full box quantities. Discount available for full box orders. Full ox Qty: 50 Full ox Qty: 50 positive 45 degree angle hinge 42mm Self-Closing GF16380-08 GF16382-33 negative 45 degree angle hinge 42mm Self-Closing GF24182-34 GF24181-34 Positive 45 Degree Angle Hinge Negative 45 Degree Angle Hinge 100 degree glass door hinge Glass Door Hinge Grass 3000 Series, glass door hinge can reduce glass door installation time by 50% and is designed to reduce stress on glass at point of attachment For glass thicknesses from 1/8 to 9/32, maximum glass thickness for tempered glass is 5/32 Requires 30mm diameter hole in glass, 7/32 to 1/4 from edge Order cover plate separately Maximum door overlay is 3/4 Grass 3000 Series glass door hinges have: - Hinge cup edge drilling distance of 3mm to 6mm - Three dimensional adjustment built into hinge arm provides +/-2mm side-to-side, depth and height adjustment 3000 Series hinges are designed to work with the mounting plates on -40 Available in self-closing versions Packing: Full box quantity of 50. NOTE: (*) SPECIAL ORDER Sold In: oth broken and full box quantities. Discount available for full box orders. - 30 Full ox Qty: 300 FULL OVERLAY Self-Closing GF50110-34 HALF OVERLAY Self-Closing Coverplates - round Description lack, Plastic GF3503-84221* Polished Nickel GF3503-83585* Würth aer GF3505GT Supply Company Over 40,000 products in-stock EVERYDAY!
specialty application hinges 110 & 165 DEGREE, push to open self-opening hinges Full, Half Overlay & Inset Salice Series 200 self-opening/push to open hinge is a hinge that contains a special reverse spring which enables the door to open automatically once a small amount of pressure is applied to the door The pressure to the door activates a release device (see next page -32 for Salice release devices) at which point the hinge takes over and opens the door completely The release device serves to hold the door in the closed position as well as to release the door There are two types of release devices: mechanical and magnetic (described on the next page) 200 Series 110 and 165 degree push to open hinges have: - Cup depths of only 11mm making the hinge compatible with most cabinet door profiles - Hinge cup edge drilling distance of 3mm to 9mm - Patented parallel side-to-side adjustment of +4.5mm to -1.5mm via hinge arm screw Available in Screw-on with two #6 x 5/8 screws (not included) and press-in dowel cup fastening designs Series 200 hinges are designed to work with all Salice mounting plates described on pages -44 to -46 Packing: 110 degree hinges have full box quantity of 300. 165 degree hinges have a full box quantity of 100. Sold in: oth broken and full box quantities. Discount available for full box orders. Full Overlay D = (15 + K) - H Half (3/8 ) Overlay D = (6 + K) - H 110 degree PUSH HINGE-Self-opening Press-in Dowel Cup full overlay 45mm Self-Opening UC2PPA99 UC2RPA99 Half (3/8 ) overlay 45mm Self-Opening UC2PPG99 UC2RPG99 inset 45mm Self-Opening UC2PP99 UC2RPP99 110 Push Hinge 165 Push Hinge Inset D = (-2 + K) - H 165 degree PUSH HINGE - Self-opening Press-in Dowel Cup full overlay 45mm Self-Opening UC2PSA99 UC2RSA99 Half (3/8 ) overlay 45mm Self-Opening UC2PSG99 UC2RSG99 inset 45mm Self-Opening UC2PSP99 UC2RSP99 Key: S = Thickness of the cabinet side D = Required door overlay T = Door thickness K = Drilling distance A = Reveal L = Gap between door and carcase H = Height of mounting plate G = Hinge constant - Full overlay = 15 1/2 overlay = 10 Half (3/8 ) overlay = 6 Inset = -2 800-UY-AER (289-2237) www.baersupply.com Fax: 888-558-2237-31
specialty application hinges PUSH HINGE, LATCHES & Catches Mechanical & Magnetic Catches For Use With Salice Push To Open Hinges These mechanical and magnetic push latches and catches are specifically designed to work in conjunction with Salice Push Hinges illustrated on preceding pages Mechanical Push Latch/Catch: - The adjustable push latch is made of a screw-affixed adapter housing and separate catch device (see illustrations below) - The push latch adapter has -1mm to +2.5mm of depth adjustment controlled by a small hand turned adjuster wheel at the back of the housing - The push latch adapter has +/-2mm left-to-right adjustment via elongated fixing screw hole - Push catches come in two styles: surface mounted or recessed 26mm diameter x 8mm deep catch Magnetic Push Latch with Strike Plate: - Push latch can be recess mounted by inserting latch into a 10mm diameter x 40mm long bore hole - Push latch can also be installed via an optional surface mounted hand adjustable (+/-2mm front-to-back adjustment) adapter - Magnetic push latch comes with strike plate Packing: Mechanical push latches are full box quantity of 300 and magnetic latches are full box quantity of 250. Sold in: oth broken and full box quantities. Discount available for full box orders. MECHANICAL PUSH LATCH, RECESSED (box qty: 300) Finish Latch Item # Recessed Catch Item # Surface Mount Catch Item # eige UDP4SN UDP29SN UDP29SNR Gray UDP4SNG UDP29SNG UDP29SNGR lack UDP4SN3 UDP29SN3 UDP29SNG3R MECHANICAL LATCH ASSEMLY: RECESSED magnetic push latch (box Qty: 250) Magnet & Strike eige Surface Mount Housing UDPM289 UDP84SNR MAGNETIC LATCH ASSEMLY Surface Mount Recessed Mount - 32 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!
integrated soft-close hinges 105 DEGREE SHALLOW CUP INTEGRATED SOFT-CLOSE HINGE Full Overlay, 1/2 Overlay & Half Overlay Silentia Series 100 shallow cup hinges with integrated soft-close feature are designed for thin door profiles Integrated soft close mechanism is fully integrated within the hinge cup All steel hinge is nickel plated for corrosion resistance and is permanently self lubricating utilizing environmentally safe lubricants Silentia Series 100 shallow cup soft-close hinges have: - Cup depth of only 12mm making the hinge compatible with most cabinet door profiles - Hinge cup edge drilling distance of 3mm to 6mm - Patented parallel side-to-side adjustment of +4.5mm to -1.5mm via hinge arm screw Available in two cup fastening designs: Screw-on with two #6 x 5/8 screws (not included) and Press-in dowels, Series 100 hinges are designed to work with all Salice mounting plates described on pages -44 to -46 Packing: Hinges come in full box quantity of 300. Silentia accessories are packaged as shown below. Sold in: oth broken and full box quantities. Discount available for full box orders. Hinge cup depth must be bored 12.0mm deep. full overlay Press-in 45mm Soft Closing UC1P6AD9 UC1R6AD9 1/2 overlay 45mm Soft Closing UC1P6DD9 UC1R6DD9 half (3/8 ) overlay 45mm Soft Closing UC1P6GD9 UC1R6GD9 silentia accessories Description ox Qty Hinge Cup Depth Gauges 12mm Silentia hinge cup depth gauge UD1A6ACGSN 1 Silentia Hinge Spacers.6mm spacer for 105 to 110 degree hinge US2XX86T 1,200 1.2mm spacer for 105 to 110 degree hinge US2XX86AT 1,200 1.8mm spacer for 105 to 110 degree hinge US2XX86KT 1,200.6mm spacer for 155 degree hinge USXF86XT 1,200 1.2mm spacer for 155 degee hinge US2XF86AT 1,200 1.8mm spacer for 155 degree hinge US2XF86KT 1,200 Hinge Cup Depth Gauges To insure the correct hinge cup boring depth is achieved, always use the Silentia cup depth gauge during the initial set up of your drilling machine. For Series 100 Silentia hinges, use the 12mm depth gauge item #UD1A6ACGSN on page -54. Full Overlay D = (15 + K) - H Silentia Hinge Spacers Silentia spacers can be used under the hinge cup flange if the correct drilling depth cannot be achieved due to door thickness or door profile. Spacers are available in thickness of.6mm, 1.2mm and 1.8mm. Refer to page -54 to make a selection. Spacers cannot be used with Logica, tool-free hinges. 1/2 Overlay D = (10 + K) - H Key: S = Thickness of the cabinet side D = Required door overlay T = Door thickness K = Drilling distance A = Reveal L = Gap between door and carcase H = Height of mounting plate G = Hinge constant - Full overlay = 15 1/2 overlay = 10 Half (3/8 ) overlay = 6 Inset = -2 Half (3/8 ) Overlay D = (6 + K) - H 800-UY-AER (289-2237) www.baersupply.com Fax: 888-558-2237-33
integrated soft-close hinges 110 DEGREE integrated soft-close hinge Full, 1/2, 3/8 Overlay & Inset Silentia Series 700 hinges are the original cabinet hinge with integrated soft close feature designed for use in both residential and commercial cabinets where soft close action is desired The soft-close mechanism is completely hidden from view within the hinge cup Series 700 integrated soft-close hinges have: - Cup depth of only 13.5mm making the hinge compatible with most cabinet door profiles - Hinge cup edge drilling distance of 3mm to 6mm - Patented parallel side-to-side adjustment of +4.5mm to -1.5mm via hinge arm screw Available in four cup fastening designs: Screw-on with two #6 x 5/8 screws (not included), Press-in dowels, Rapido cam lock dowel and Logica tool free lever activated expanding dowels Series 700 hinges are designed to work with all Salice mounting plates described on pages -44 to -46 Packing: Full box quantity of 300. Sold in: oth broken and full box quantities. Discount available for full box orders. Hinge cup depth must be bored 13.5mm deep Press-in Cam Lock Rapido Cup Tool Free Logica Cup FULL OVERLAY HINGES 45mm Soft-Closing UC7P6AD9 UC7R6AD9 UC776AD9 UC7J6AD9 1/2 Overlay Hinges 45mm Soft-Closing UC7P6DD9 UC7R6DD9 UC776DD9 UC7J6DD9 HALF (3/8 ) Overlay Hinges 45mm Soft-Closing UC7P6GD9 UC7R6GD9 UC776GD9 UC7J6GD9 inset Hinges 45mm Soft-Closing UC7P6PD9 UC7R6PD9 UC776PD9 UC7J6PD9 Full Overlay D = (15 + K) - H 1/2 Overlay D = (10 + K) - H Hinge Cup Depth Gauges To insure the correct hinge cup boring depth is achieved, always use the Silentia cup depth gauge during the initial set up of your drilling machine. For Series 700 Silentia hinges, use the 13.5mm depth gauge item #UD7A6AC1SN on page -54. Silentia Hinge Spacers Silentia spacers can be used under the hinge cup flange if the correct drilling depth cannot be achieved due to door thickness or door profile. Spacers are available in thickness of.6mm, 1.2mm and 1.8mm. Refer to page -54 to make a selection. Spacers cannot be used with Logica, toolfree hinges. Half (3/8 ) Overlay D = (6 + K) - H Inset D = (-2 + K) - H Key: S = Thickness of the cabinet side D = Required door overlay T = Door thickness K = Drilling distance A = Reveal L = Gap between door and carcase H = Height of mounting plate G = Hinge constant - Full overlay = 15 1/2 overlay = 10 Half (3/8 ) overlay = 6 Inset = -2-34 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!
integrated soft-close hinges 155 DEGREE INTEGRATED SOFT-CLOSE HINGE Full Overlay, 1/2 Overlay & Half Overlay Silentia Series 200 hinges is the original cabinet hinge with integrated soft close feature The soft-close mechanism is completely hidden from view within the hinge cup Series 200 Silentia hinges are designed for use in both residential and commercial cabinets where soft close action is desired Series 200 thick door soft-close hinges have: - Cup depth of 13.5mm making the hinge compatible with most cabinet door profiles - Hinge cup edge drilling distance of 3mm to 8mm - Patented parallel side-to-side adjustment of +4.5mm to -1.5mm via hinge arm screw Available in two cup fastening designs: Screw-on with two #6 x 5/8 screws (not included) and Press-in dowels, Series 200 hinges are designed to work with all Salice mounting plates described on pages -44 to -46 Packing: Full box quantity of 100. Sold in: oth broken and full box quantities. Discount available for full box orders. Press-in Dowel Cup FULL OVERLAY HINGES 45mm Soft-Closing UC2PMAD9 UC2RMAD9 1/2 Overlay Hinges 45mm Soft-Closing UC2PMDD9 UC2RMDD9 Half (3/8 ) Overlay Hinges 45mm Soft-Closing UC2PMGD9 UC2RMGD9 Full Overlay D = (15 + K) - H 1/2 Overlay D = (10 + K) - H Hinge Cup Depth Gauges To insure the correct hinge cup boring depth is achieved, always use the Silentia cup depth gauge during the initial set up of your drilling machine. For Series 700 Silentia hinges, use the 13.5mm depth gauge item #UD7A6ACYSN described on page -54. Hinge cup depth must be bored 13.5mm deep Silentia Hinge Spacers Silentia spacers can be used under the hinge cup flange if the correct drilling depth cannot be achieved due to door thickness or door profile. Spacers are available in thickness of.6mm, 1.2mm and 1.8mm. Refer to page -54 to make a selection. Spacers cannot be used with Logica, tool-free hinges. Half (3/8 ) Overlay D = (6 + K) - H Key: S = Thickness of the cabinet side D = Required door overlay T = Door thickness K = Drilling distance A = Reveal L = Gap between door and carcase H = Height of mounting plate G = Hinge constant - Full overlay = 15 1/2 overlay = 10 Half (3/8 ) overlay = 6 Inset = -2 800-UY-AER (289-2237) www.baersupply.com Fax: 888-558-2237-35
integrated soft-close hinges 94 & 155 degree thick door integrated soft-close hinge Full Overlay, 1/2 Overlay, Half Overlay & Inset Silentia Series 200 hinges are the original cabinet hinge with a soft close mechanism fully integrated within the hinge cup The soft-close mechanism is completely hidden from view within the hinge cup Suitable for doors up to 1-1/4 thick while maintaining minimal gaps between doors Large overlays possible: up to 24mm All steel hinge is nickel plated for corrosion resistance and is permanently self lubricating utilizing environmentally safe lubricants Hinge cup depth must Silentia Series 200 thick door soft-close hinges have: be bored 15.5mm deep - Cup depth of 15.5mm - Hinge cup edge drilling distance of 3mm to 9mm - Patented parallel side-to-side adjustment of +4.5mm to -1.5mm via hinge arm screw Available in two cup fastening designs: Screw-on with two #6 x 5/8 screws (not included) and Press-in dowels Series 200 hinges are designed to work with all Salice mounting plates described on pages -44 to -46 Packing: Full box quantity of 100 hinges for 155 degree hinges and full box quantity of 300 hinges for 94 degree hinges. Sold in: oth broken and full box quantities. Discount available for full box orders. 94 degree hinge for thick doors Screw-on Cup Press-in full overlay 45mm Soft-Closing UC2PAD9 UC2RAD9 1/2 overlay 45mm Soft-Closing UC2PDD9 UC2RDD9 half (3/8 ) overlay 45mm Soft-Closing UC2PGD9 UC2RGD9 inset 45mm Soft-Closing UC2PPD9 UC2RPD9 155 degree hinge for thick doors Screw-on Cup Press-in full overlay 45mm Soft-Closing UC2PDAD9 UC2RDAD9 1/2 overlay 45mm Soft-Closing UC2PDDD9 UC2RDDD9 half (3/8 )overlay 45mm Soft-Closing UC2PDGD9 UC2RDGD9 Full Overlay D = (15 + K) - H 1/2 Overlay D = (10 + K) - H Hinge Cup Depth Gauges To insure the correct hinge cup boring depth is achieved, always use the Silentia cup depth gauge during the initial set up of your drilling machine. For Series 200 thick door Silentia hinges, use the 15.5mm depth gauge item #UD2A6AC3SN on page -54. Half (3/8 ) Overlay D = (6 + K) - H Inset D = (-2 + K) - H Key: S = Thickness of the cabinet side D = Required door overlay T = Door thickness K = Drilling distance A = Reveal L = Gap between door and carcase H = Height of mounting plate G = Hinge constant - Full overlay = 15 1/2 overlay = 10 Half (3/8 ) overlay = 6 Inset = -2-36 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!
integrated soft-close hinges Positive 45 degree Angle & lind Corner Integrated soft-close hinge Silentia Series 700 positive and negative angle hinges are designed for use in both residential and commercial cabinets The soft-close mechanism is completely hidden from view within the hinge cup Silentia Series 700 positive and negative degree opening soft close hinges have: - Cup depth of 13.5mm making the hinge compatible with most cabinet door profiles - Hinge cup edge drilling distance of 3mm to 8mm - Patented parallel side-to-side adjustment of +4.5mm to -1.5mm via hinge arm screw Available in two cup fastening designs: Screw-on with two #6 x 5/8 screws (not included) and Press-in dowels Series 700 hinges are designed to work with all Salice mounting plates described on pages -42 to -44 Packing: Full box quantity of 150. Sold in: oth broken and full box quantities. Discount available for full box orders. Press-in positive 45 degree Angle - open side 45mm Soft-Closing UC7P6MD9 UC7R6MD9 positive 45 degree angle - adjoining door application 45mm Soft-Closing UC7P6MD9AC UC7R6MD9AC blind corner 45mm Soft-Closing UC7P6ND9AC UC7R6ND9AC overlay blind corner 45mm Soft-Closing UC7P6ND9AM UC7R6ND9AM Hinge Cup Depth Gauges To insure the correct hinge cup boring depth is achieved, always use the Silentia cup depth gauge during the initial set up of your drilling machine. For Series 700 Silentia angle hinges, use the 13.5mm depth gauge item #UD7A6ACYSN on page -54. Hinge cup depth must be bored 13.5mm deep Positive 45 Angle Open Side Positive 45 Angle Adjoining lind Corner Overlay lind Corner 800-UY-AER (289-2237) www.baersupply.com Fax: 888-558-2237-37
Miscellaneous hinges Surface Mounted Hinges Fully Concealed Allows you to achieve the clean European look without any boring in the cabinet door For use on overlay or flush doors in non-face frame installations Elongated screw holes make these hinges fully adjustable Packing: 50 each per box without screws. Description Sold In: oth broken and full box quantities. Discount available for full box orders. IMCS1-R Self Locking IMCS1A-R Free Swinging Miter Hinge, Screw Mounted 135 Degree Opening 135 degree opening, free swinging, nickel plated miter hinge designed for the door and cabinet edges to meet at 45 degrees For doors and side panels from 16mm (5/8 ) to 22mm (7/8 ) thickness Adjustable vertically (+/-3.0mm), laterally (+1/-1.5mm) and front to back (+1/-1.5mm) Specifications: - Cup Diameter: oth cups 35mm (1-3/8 ) - ore Center from edge of door: 7mm (9/32 ) - Cup Insertion Depth: 13.5mm (17/32 ) - Door Thickness: 16mm (5/8 ) to 22mm (7/8 ) Packing: 20 each per box without screws. Sold In: oth broken and full box quantities. Discount available for full box orders. HE325-00-708 Fascia Hinges 35mm Cup Hinge is designed to mount hinge fascia or for connecting two door sections on folding/sliding doors Integrated spring system keeps the door closed in a 90 degree position and keeps the fascia aligned with the door Requires a 35mm cup hole in the back of the flap Nickel plated die-cast zinc Packing: 50 per box without screws. Sold In: oth broken and full box quantities. Discount available for full box orders. HT1019879 Finish Nickel-Plated - 38 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!
base plates grass nexis face frame adapter base plates Slotted Hole & Two Cam Adjustment Nexis face frame adapter plates are made of die-cast steel and affix to hinge via clip on design Face frame adapter plate Style A provides +/-2mm of height adjustment via elongated screw holes Face frame adapter plate Styles and C have two cams and provide +/-2mm of cam height adjustment and +3/-1mm of cam depth adjustment Styles A & attach to cabinet side via #6 x 5/8 flat head screws (see pages -53 for screws), Style C attaches to cabinet side via pre-mounted wood screws and Style D attaches with #6 x 3/4 pan head screws A Packing: Full box quantity of 250 base plates. Sold In: oth broken and full box quantities. Discount available for full box orders Height-adjustable Height adjustment via elongated hole Plate Height ox Qty economy slotted hole height adjustment DIECAST, WOOD SCREW MOUNTING A GF346.290.88.0015 0mm 250 GF346.290.88.0415 4mm 250 dual cam adjustment-height & depth DIECAST, OPEN HOLE WOOD SCREW ATTACHMENT GF346.290.91.0015 0mm 250 GF346.290.91.0215 2mm 250 GF346.290.91.0415 4mm 250 DIECAST, PRE-ATTACHED WOOD SCREWS C GF346.290.92.0015 0mm 250 GF346.290.92.0215 2mm 250 GF346.290.92.0415 4mm 250 FLUSH inset/beaded inset - for use with half overlay hinge arm D DIECAST/STEEL, WOOD SCREW MOUNTING GF346.290.90.0215 2mm 250 Height-adjustable Depth-adjustable C Height-adjustable D Height-adjustable Depth-adjustable Height and depth adjustment via eccentric cam Desired Door Gap Drilling Distance for Hinge Cup 1/8 1/8 3/32 5/32 1/16 3/16 grass nexis series - base plate height selection Frameless or Face Frame ase Plate Guidelines ase Plate Height door overlay table 5/32 3/16 1/4 9/32 5/16 11/32 3/8 7/16 15/32 1/2 9/16 19/32 5/8 21/32 11/16 3/4 25/32 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Half Overlay Hinges Full Overlay Hinges 4 2 0 8 6 4 2 0 4 2 0 8 6 4 2 0 4 2 0 8 6 4 2 0 4 2 0 8 6 4 2 0 Drilling Distance DD 1/8 5/32 3/16 1/4 800-UY-AER (289-2237) www.baersupply.com Fax: 888-558-2237-39
base plates grass nexis frameless cabinet base plates Slotted Hole & Single Cam Height Adjustable ase Plates Grass Nexis base plates are constructed of economy stamped steel or high grade die-cast steel and affix to hinge via clip on design Available in two cabinet side fixing styles: two point or three point All base plates have +/-2mm of height adjustment Available in open hole (to accommodate wood or Euro screws) or pre-mounted Euro screw models Attach with #6 x 5/8 flat head screws, see page -53 for screws Packing: Full box quantity of 250 base plates. Sold In: oth broken and full box quantities. Discount available for full box orders. 2 point fixing Economy stamped steel plate with slotted screw hole height adjustment Plate Height Open Hole for Wood Screws With Pre-mounted Euro Screws 0mm GF314.393.81.0015 GF318.393.81.0015 2mm GF314.393.81.0215 GF318.393.81.0215 4mm GF314.393.81.0415 GF318.393.81.0415 2-POINT FIXING STAMPED STEEL SLOTTED HOLE Slotted hole height-adjustable Slotted hole height-adjustable Plate Height 3 point fixing die-cast one screw height adjustment Open Hole for Wood Screws Open Hole for Euro Screws 0mm GF315.393.55.0015 GF317.393.56.0015 2mm GF315.393.55.0215 GF317.393.56.0215 4mm GF315.393.55.0415-8mm GF315.393.55.0815 GF317.393.56.0815 18mm GF315.393.55.1815 GF317.393.56.1815 3-POINT FIXING DIE-CAST HEIGHT ADJUSTALE Cam height-adjustable 2 point fixing stamped steel one cam height adjustment Plate Height Open Hole for Wood Screws With Pre-mounted Euro Screws 0mm GF314.393.69.0015 GF318.393.69.0015 2mm GF314.393.69.0215 GF318.393.69.0215 2-POINT FIXING CAM HEIGHT ADJUSTALE Cam height-adjustable Cam height-adjustable Height and depth adjustment via eccentric cam - 40 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!
base plates grass nexis frameless base plates Two Cam Height & Depth Adjustment ase Plates Grass Nexis two cam adjustment base plates offer +/-2mm of cam height adjustment and +3mm/-1mm of cam depth adjustment Hinge affixes to plate via clip on design Nexis base plates are available in two cabinet side affixing methods: open hole for #6 size wood screws and with pre-mounted Euro screws Nexis base plates come in two point fixing or three point fixing versions Nexis two cam adjustment base plates are available in 0mm through 8mm heights Attach with #6 x 5/8 flat head screws, see page -53 for screws Packing: Full box quantity of 250 base plates. Sold In: oth broken and full box quantities. Discount available for full box orders Plate Height Open Hole for Wood Screws 2 point fixing 3 point fixing With Pre-mounted Euro Screws Open Hole for Wood Screws With Pre-mounted Euro Screws 0mm GF314.493.71.0015 GF318.493.71.0015 GF314.493.70.0015 GF318.493.70.0015 2mm GF314.493.71.0215 GF318.493.71.0215 GF314.493.70.0215 GF318.493.70.0215 4mm GF314.493.71.0415 GF318.493.71.0415 GF314.493.70.0415 GF318.493.70.0415 6mm GF314.493.71.0615 GF318.493.71.0615 - - 8mm GF314.493.71.0815 GF318.493.71.0815 GF314.493.70.0815 GF318.493.70.0815 Cam height adjustable Cam depth adjustable 2-POINT FIXING OPEN HOLE FOR WOOD SCREWS Cam height adjustable Cam depth adjustable 2-POINT FIXING WITH PRE-MOUNTED EURO SCREWS 37 Cam height adjustable Cam depth adjustable 3-POINT FIXING OPEN HOLE FOR WOOD SCREWS Cam height adjustable Cam depth adjustable 3-POINT FIXING WITH PRE-MOUNTED EURO SCREWS 800-UY-AER (289-2237) www.baersupply.com Fax: 888-558-2237-41
base plates grass 3000 series base plates For Use With All 3000 Series Die-cast base plates for the Grass 3000 series of hinges are constructed of die-cast steel Wing base plates available in screw-on, Euro screw, or pre-mounted Euro screw Additional screw holes provided in winged base plates for demanding applications For maximum holding power use all available screw holes Packing: Full box quantity of 50 base plates. Sold In: oth broken and full box quantities. Discount available for full box orders. Plate Height wing base plates for frameless Applications Wood Screw Attachment Euro Screw Attachment Pre-Mounted Euro Screw Attachment 1.3mm GF10759-21 GF10761-21 GF12643-21 4.3mm GF10763-21 GF10765-21 GF10191-21 9.3mm GF10767-17 GF10769-17 GF17672-17 12.3mm GF30532-52 GF30533-41 - 20mm GF30534-52 GF30535-52 - FRAMELESS WING PLATES Wood Screw Attachment Euro Screw Attachment FRAMELESS WING PLATES Plate Height straight base plates Wood Screw Attachment Dowel Attachment 1.3mm GF3000-10717 GF3000-10722 4.3mm GF3000-60174 - 9.3mm - GF3000-11519 face frame adapter plates Plate Height Diecast with Locating Tabs Diecast with Lip 2.6mm - GF13158-52 4.3mm GF69238-52 - 7.3mm GF13160-52 - Pre-Mounted Euro Screw inset application face frame adapter plate - attach with #6 x 3/4 FHP screws die-cast with locating flange - use 1.3 plate with half overlay hinges Plate Height 1.3mm 4.3mm GF39183-48 GF39184-48 base plates spacer wedge - 7.5 degree INSET FACE FRAME - GF38314 Face Frame Adapter Plate Diecast with Locating Tabs FACE FRAME ADAPTER PLATES Face Frame Adapter Plate Diecast with Lip - 42 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!
base plates SALICE MOUNTING PLATE SELECTION GUIDE FRAMELESS CAINETS: Using 4mm (5/32 ) TA Distance Mounting Plate Choices 0mm Mounting Plate 2mm Mounting Plate 3mm Mounting Plate 6mm Mounting Plate 9mm Mounting Plate 12mm Mounting Plate 18mm Mounting Plate Hinge Choices Full Overlay Hinge 1/2 Overlay Hinge Half Overlay Hinge Inset Hinge A D G P 3/4 Overlay (19mm) 11/16 Overlay (17mm) 5/8 Overlay (16mm) 1/2 Overlay (12.5mm) 3/8 Overlay (10mm) 1/4 Overlay (6mm) Inset Door (Plus Adjustment) 9/16 Overlay (14mm) 1/2 Overlay (12.5mm) 7/16 Overlay (11mm) 5/16 Overlay (8mm) 3/16 Overlay (5mm) (Plus Adjustment) 3/32 Overlay (2mm) (Plus Adjustment) 3/8 Overlay (10mm) 5/16 Overlay (7mm) 1/4 Overlay (6mm) (Plus Adjustment) 5/32 Overlay (4mm) Inset Door (Plus Adjustment) - Inset Door (Plus Adjustment) Inset Door Inset Door - - - - - - Desired Overlay FACE FRAME CAINETS: Using 4mm (5/32 ) TA Distance Mounting Plate Choices 1mm Face Frame Mounting Plate 4mm Face Frame Mounting Plate AL3R59 Mounting Plate AM3R09 Mounting Plate Hinge Choices Full Overlay Hinge 1/2 Overlay Hinge Half Overlay Hinge Inset Hinge A D G P 3/4 Overlay (19mm) 9/16 Overlay (15mm) - 1-1/4 Overlay (32mm) (Use 6mm Tab (K)) 1/2 Overlay (12.5mm) 3/8 Overlay (10mm) Inset Door (Use 3mm Tab) 3/8 Overlay (10mm) 5/16 Overlay (7mm) 1/4 Overlay (6mm) 5/16 Overlay (5mm Tab) Inset Door - - - - - - Desired Overlay For a precise overlay calculation, you can use these formulas Full Overlay D = (15 + K) - H Half Overlay D = (6 + K) - H 1/2 Overlay D = (10 + K) - H Inset D = (-2 + K) - H Where: D = Desired Overlay K = Edge Distance H = Mounting Plate Height A = Gap 800-UY-AER (289-2237) www.baersupply.com Fax: 888-558-2237-43
face frame base plates salice face frame adapter mounting plates Single Cam Depth & Two Cam Height & Depth Adjustment Constructed of stamped steel or die-cast steel with nickel plating to resist corrosion Single cam plates provide -0.5mm to +2.8mm cam depth adjustment and +/-2mm of manual elongated screw hole height adjustment Two cam plates provide 0.5mm to +2.8mm cam depth adjustment and +/-2mm cam height adjustment Available in 0mm to 4mm thickness for overlay applications and 5mm thickness for inset applications Lifetime warranty Packing: 50 each per box. Sold in: oth broken and full box quantities. Discount available for full box orders. Plate Height stamped steel A Adjustment Application 1mm Single Cam Overlay UAU3L19 4mm Single Cam Overlay UAU3L49 die-cast steel C 1mm Single Cam Overlay UAU3E19 4mm Single Cam Overlay UAU3E49 1mm Two Cam Overlay UAU3R19 4mm Two Cam Overlay UAU3R49 D 0mm Two Cam Large Overlay UAM3R09 E 5mm Two Cam Inset UAL3R59 A Overlay Single Cam Stamped Steel Overlay Single Cam D Large Overlay - 2 Cam C Overlay - 2 Cam E Inset 2-Cam For inset doors, use mounting plate AL3R59 and any half overlay ( G ) or 1/2 overlay ( D ) hinge type. - 44 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!
base plates economy SLIDE-ON mounting plates Slotted Hole Height Adjustment All mounting plates compatible with any Salice hinge series Hinge affixes to plate by sliding hinge onto plate and then tightening pre-mounted screw on plate Height adjustment of +/-2mm by slotted holes Standard 37mm x 32mm positioning Constructed of stainless steel nickel plated, corrosion resistant Lifetime warranty Packing: Full box quantity of 50. Sold in: oth broken and full box quantities. Discount available for full box orders. Plate Height Wood Screw Attachment Pre-Mounted Euro Screw Attachment 0mm U2V3H0915 U2VGH0917 3mm U2V3H3915 U2VGH3917 slide-on hinge mounting plates For Special Angle Applications Variable positioning allows for virtually infinite angle applications Hinge affixes to plate by sliding hinge onto plate and then tightening pre mounted screw on plate Angle possibilities from (-45 ) to (+160) Height adjustment of +/-2mm by slotted holes Standard 32mm hole centers Die-cast, nickel plated, corrosion resistant Lifetime warranty Packing: Full box quantity of 50. Sold in: oth broken and full box quantities. Discount available for full box orders. Wood Screw 15 Angle Wood Screw +7.5 to -7.5 Variable Wood Screw +10 to +30 Variable U2V3W915 U2V3W9R15 U2V3W9S15 15 Angle Fixed +7.5 to -7.5 Variable +10 to O +30 Variable CLIP-ON HINGE Mounting PLATES Single Cam Depth Adjustment Economical clip on plate compatible with all Salice hinges Series F and Series Depth adjustment of - 0.5mm to +2.8mm by eccentric cam Height adjustment of +/-2mm by slotted holes Standard 37mm x 32mm positioning Nickel plated, corrosion resistant Lifetime warranty Packing: 50 each per box. Sold in: oth broken and full box quantities. Discount available for full box orders. Plate Height Open Hole Wood Screw Attachment Pre-Mounted Euro Screw Attachment 5mm Expanding Dowels Attachment stamped steel 0mm UAV3L09F UAVGL09F16 UAV4L09F16 3mm UAV3L39F UAVGL39F16 UAV4L39F16 6mm UAV3L69F UAVGL69F16 - die-cast steel 9mm UAV3E99F UAVGE99F16-12mm UAV3EC9F UAVGEC9F16-18mm UAV3EV9F UAVGEV9F16-800-UY-AER (289-2237) www.baersupply.com Fax: 888-558-2237-45
base plates CLIP-ON HINGE Mounting PLATES Two Cam Height & Depth Adjustment Premium two cam adjustable hinge mounting plates that are compatible with all Salice hinges Constructed of stamped steel or die-cast steel with nickel plating to resist corrosion Two cam adjustment provides cam height adjustment of +/-2mm and cam depth adjustment of -0.5mm to +2.8mm Available in three different cabinet side fastening methods: 1.) Open hole for #6 x 5/8 wood screws, 2.) Pre-mounted Euro screws and 3.) Screw-in expanding 5mm dowels Lifetime warranty Packing: Full box quantity of 50. Sold in: oth broken and full box quantities. Discount available for full box orders. Plate Height Open Hole Wood Screw Attachment Pre-Mounted Euro Screw Attachment 5mm Expanding Dowel Attachment stamped steel 0mm UAR3L09F UARGL09F16-3mm UAR3L39F UARGL39F16-6mm UAR3L69F UARGL69F16 - die-cast steel 0mm UAR3R09 UARGR0916 UAR4R0916 2mm UAR3R29 UARGR2916 UAR4R2916 3mm UAR3R39 UARGR3916 UAR4R3916 6mm UAR3R69 UARGR6916 UAR4R6916 9mm UAR3R99 UARGR9916-12mm UAR3RC9 UARGRC916 - Die-cast Steel Stamped Steel CLIP-ON, IN-LINE, HINGE Mounting PLATES Two Cam Height and Depth Adjustment Salice Domi slim style hinge mounting plates are constructed of die-cast steel Height adjustment by eccentric cam +/-2mm Depth adjustment by eccentric cam of 0.5mm to +2.8mm Nickel plated, corrosion resistant Available in three different cabinet side attachment methods: 1) Open hole for #6 x 5/8 wood screws, 2) Pre-mounted Euro screws and 3) Knock-in 10mm dowel Lifetime warranty Packing: 50 each per box. Sold in: oth broken and full box quantities. Discount available for full box orders. Plate Height Open Hole Wood Screw Attachment Pre-Mounted Euro Screw Attachment 10mm Knock-in Dowel Attachment 0mm UAP3R09 UAPGR0916 UAP7R09 2mm UAP3R29 UAPGR2916 UAP7R29 3mm UAP3R39 UAPGR3916 UAP7R39 6mm UAP3R69F UAPGR6916 UAP7R69-46 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!
base plates Titus lama hinge mounting plates Frameless & Face Frame Titus hinge mounting plates are manufactured in Europe with an economical price Frameless hinge plates are constructed of stamped steel, face frame plates are constructed of stamped steel and zinc die-cast Limited lifetime warranty Available in four fastening designs: open hole wood screw, open hole Euro screw, pre-mounted Euro screw and expandable dowel Euro screw uses standard euro screws (not included), wood screw uses #7 (not included) All plates have height adjustment of +/-2mm via elongated screw hole or cam Packing: Full box quantity of 200 plates. Sold In: oth broken and full box quantities. Discount available for full box orders. Cam Adjustment Elongated Adjustment frameless mounting plates with +/-2mm elongated screw hole adjustment Height Adjustment Material Plate Height Open Hole Wood Screw Full ox Qty: 200 Open Hole Euro Screws Full ox Qty: 200 Pre-mounted Euro Screws ox Qty: 200 Expandable Dowel Full ox Qty: 200 Elongated Stamped Steel 0mm TT244.1233.050 - TT244.0118.050 - Elongated Stamped Steel 2mm - - TT244.0120.050 - Elongated Stamped Steel 3mm TT244.1234.040 - TT244.0119.050 - Elongated Zinc Die-Cast 18mm - TT244.0085.650 - - frameless mounting plates with +/-2mm cam height adjustment Cam Stamped Steel 0mm TT244.0H07.050 TT244.0R22.050 TT244.0S92.050 TT244.0S43.050 Cam Stamped Steel 2mm - - TT244.0S95.050 - Cam Zinc Die-Cast 3mm TT244.0H08.050 TT244.0R24.050 TT244.0S96.050 TT244.0S45.050 face frame mounting plates Height Adjustment Material Plate Height Wood Screw Full ox Qty: 200 Elongated Stamped Steel 0mm TT244.1638.050 Elongated Stamped Steel 3mm TT244.1639.050 Elongated Zinc Die-Cast 0mm TT244.3653.650 Elongated Zinc Die-Cast 3mm TT244.3654.650 Elongated Zinc Die-Cast 6mm TT244.3655.650 Face Frame Stamped Steel Face Frame Zinc Die-Cast 800-UY-AER (289-2237) www.baersupply.com Fax: 888-558-2237-47
hinge soft-close adapters hinge attachment soft-close Grass Nexis Series Soft-Close Adapters Easily add Soft-Close to any cabinet door using Nexis or Nexis Impresso hinges Three Nexis soft close adapters are designed to attach to Nexis and Nexis Impresso to cover a full range of hinges and applications: - Adapter for Nexis 95, 110 and 125 degree doweled and screw-on hinge cups - Adapter for Nexis and Nexis Impresso 170 degree hinge arm - Adapter for Nexis Impresso 95, 110 and 125 degree hinge cups Installs on to hinge cup in seconds without tools can be installed in the field State of the art, adjustable soft-closing damper covers a wide range of door sizes and weights Soft close dampening is easily adjusted by hand with adjustment screw Die-cast steel construction with Nickel finish blends in with hardware Mounts on cup- does not intrude into cabinet space 95, 110, and 125 hinges 1 unit per door for most applications multiple units can be used for very large doors Packing: Full box quantity of 125 adapters. Sold In: oth broken and full box quantities. 21 46.5 37 Description ox Qty SOFT-CLOSE FOR NEXIS for 95, 110 & 125 degree - doweled & screw-on designs GF924.200.40.0215 Nexis Soft-Close Adapter 125 GF924.200.40.0115 Nexis Soft-Close w/covercaps Set 125 Nexis Soft-close adapter Soft-close set Description ox Qty SOFT-CLOSE FOR NEXIS & nexis impresso wide angle 170 degree hinges GF68081-10 Wide Angle Soft-Close 125 Description ox Qty SOFT-CLOSE FOR NEXIS impresso 95, 110 & 125 degree hinges ME924.200.41.0015 Impresso Adapter 125 GF924.012.50.0142 Damper 125 Soft-close Impresso adapter Soft-close damper 21 46 38-48 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!
hinge soft-close adapters universal face frame cabinet soft-close Grass Unisoft Adjustable Soft-Close Grass Unisoft cabinet soft close devices is unhanded and mounts independently of door hinge The unit is designed to mount with a single screw to the upper corner of the cabinet opening Unisoft is constructed of high grade plastic and has a sleek brushed nickel finish housing The Unisoft soft-closing speed/tension can be easily adjusted by the hand turn of a rear screw Unisoft can be effectively used on a wide variety of door sizes and door weights, including face frame applications Scratch protector and front bumper with cushion for all quiet close Packing & Sold In: As shown below. GF18971-37 GF18971-40 GF18971-14 GF13998-37 ox Qty 1 each per poly bag 25 per box 250 per box 125 poly bags (point of purchase display) touch-latch push open hinge adapter set Grass Nexis Free Swinging Hinge Adapter Easily converts all models of Grass free swing hinges to touch open Snaps on to screw-on or doweled hinge cup Adjustable force-handles different size doors Gently tapping door front causes doors to open to a convenient angle 1 unit per door for most applications multiple units can be used for very large doors 1 set includes: (1) tipmatic plus adapter, (1) tipmatic plus ejector, (1) counterplate for gluing, (1) counterplate for screw fixing with screw and (1) magnetic pin Packing: As shown below. Sold In: oth broken and full box quantities. Discount available for full box orders. Description ox Qty GF924.275.40.0315 Tipmatic Plus Set 100 GF63311-40 Frame Adapter Plate 250 800-UY-AER (289-2237) www.baersupply.com Fax: 888-558-2237-49
hinge soft-close adapters universal cabinet soft-close Salice Smove, The Original Cabinet Soft-Close Insert Smove soft-close devices into 10mm diameter x 50mm deep bore hole or surface mount into Smove adapter Three different models feature three different tension levels to accommodate varying door sizes/weights and cabinet positioning Packing: As shown below. Sold in: oth broken and full box quantities. Discount available for full box orders. SMOVE FOR Insertion (box qty: 250) Light Tension Medium Tension High Tension UD006SNG UD007SNG UD008SNG SMOVE adapter (box qty: 500) Description eige Honey Face Frame Adapter Plates UD066SNN UD066SNQN Series S Face Frame Hinges UD067SNN UD067SNQN universal cabinet Soft-close Salice Type L Smove Adjustable Soft-Close One piece soft-close device is suitable for frame or frameless cabinets Can be used with either Salice S Series or 200 Series face frame applications Three models offer varying resistance levels to adapt to varying door styles, weights & overlay applications Additional tension adjustment is provided by tightening/loosening adjustment screw on the Type L Smove Attached using two common #6 x 5/8 wood screw Precise positioning established using the integrated front locator tab Precise, consistent positioning from cabinet side by means of assembly tabs Non handed. One Smove for either left or right side mounting Only 1 Smove Type L required per door Packing: 150 per case. Sold in: oth broken and full box quantities. Discount available for full box orders. Medium Tension UD0LHSNG For doors with 2 or 3 hinges (lack piston) High Tension UD0L8SNG For doors with 4 hinges (Orange piston) Extra High Tension UD0L9SNG For extremely heavy doors only (eige piston) - 50 universal face frame cabinet Soft-close Salice Type U Smove Adjustable Soft-Close One piece single face frame design for all door styles Soft top to prevent door marring and easily mounted using a single #6 wood screw Adjustable (screw turn) tension for varying door sizes/weights Consistent spacing using indexing tab Does not interfere with space needed for rollout shelves or access to hinge adjustment screws Convenient, single part ordering (Smove and housing as one integrated part) Packing: 150 per box. Sold in: oth broken and full box quantities. Discount available for full box orders. Left Side Mount UD0UR0G Würth aer Supply Company Over 40,000 products in-stock EVERYDAY! Right Side Mount UD0UL0G
hinge soft-close adapters hinge attachment soft-close Salice S Type Soft-Close for Hinge Mounting Applications Easy to mount after hinge installation The S type soft-close device contacts and connects to hinge flange, not to the door (prevents door marring) Does not interfere with hinge adjustments Low profile: Does not intrude on cabinet interior space Adjustable closing speed with turn of adjustment screw Only 1 Smove required per door Type S Smove soft closing devices are available in three tension settings: light, medium and high resistance Type S Smoves require a separate mounting block to attach Smove soft close device to the hinge flange - Mounting blocks are available in four heights to accommodate full to half overlay and inset hinge configurations - Mounting blocks come in two types: one type designed to affix to die-cast hinge plates and the second type is designed to affix to stamped steel mounting plates Packing: 300 per full box. Sold in: oth broken and full box quantities. Discount available for full box orders. TYPE S EURO SMOVE Light Tension UD0SHSNG For doors with 2 or 3 hinges (lack piston) Medium Tension UD0S8SNG For doors with 4 or more hinges (Orange piston) High Tension UD0S9SNG For extremely heavy doors only (eige piston) TYPE S Mounting LOCKS for use with salice die-cast steel hinge mounting plates With Full Overlay Hinge With 1/2 Overlay Hinge With Half (3/8 ) Overlay Item # With Inset Hinge UDARX09 UDARX59 UDARX99 UDARXCP9 TYPE S Mounting LOCKS for use with STAMPED steel hinge mounting plates With Full Overlay Hinge With 1/2 Overlay Hinge With Half (3/8 ) Overlay Item # With Inset Hinge UD2VX09 UD2VX59 UD2VX99 UD2VXP9 Step 1: Loosen mounting Step 2: Slide block under Step 3: Tighten screw. Step 4: Clip Smove to block 800-UY-AER plate screw. (289-2237) screw head. www.baersupply.com Fax: 888-558-2237 and adjust. - 51
hinge soft-close adapters universal face frame cabinet soft-close Titus Glissando Soft Closing System Stand alone one piece soft-close adapter designed for face frame cabinets Soft and gentle door closing Fastens directly to face frame (see illustration) so that it remains out of sight Adjustable for varied door heights and weights Packing: 100 each per box. Sold In: oth broken and full box quantities. Discount available for full box orders. TT951.0Z44.650 Application Face Frame hinge attachment soft-close Titus Glissando Soft Closing System Titus Glissando Soft-Closing System is designed to affix to Titus Lama 110 and 125 degree hinges (see hinges on pages -10 and -15) Fasten to the hinge cup via 15mm long screws (see illustration below) and does not require additional space inside of cabinet Has screw adjustable soft-close dampening adjustment to adjust for varying door sizes/weights Constructed of die-cast steel and plastic Packing: 100 each per box. Sold In: oth broken and full box quantities. Discount available for full box orders. TT951.0V94.650 TT951.0V99.650 For Use With 110 degree opening hinge 125 degree opening hinge - 52 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!
hinge accessories hinge accessories Packing: As shown below. Sold in: oth broken and full box quantities. Discount available for full box orders. A C D E F G H I J K L M N Description Grass rand Wurth rand Item # ox Qty Item # ox Qty SPACERS A 1.5mm (1/16 ) thick with locating pins GF88881 200 - - 1.5mm (1/16 ) thick without locating pins GF00264-42 200 - - C 1.5mm (1/16 ) thick, slotted GF860-76 50 - - E 1.5mm (1/16 ) thick, slotted for MDF hinge GF00209-42 200 - - D 1.5mm (1/16 ) thick, hinge cup spacer GF00284-42 100 - - grass hinge wood screws F #6 x 1/2 Flat head, Nickel GF81014 500 WW54200 1,000 G #6 x 5/8 Flat head, Nickel GF81001 500 WW54375 1,000 H #8 x 3/4 Round head, self-drilling, Zinc GF81018 500 WW55500 1,000 I #8 x 3/4 Pan head, self-drilling, Zinc GF81006 500 WW46500 1,000 J #8 x 3/4 Washer head, Nickel GF81010 500 WW45800 1,000 K #10 x 3/4 Pan head, Nickel GF81007 500 - - grass hinge Euro SCREWS 13mm Euro screw (1/2 ) GF81015K 500 WW60260 1,000 L 18mm Euro screw (11/16 ) GF83000K 500 WW60350 1,000 7.5mm Euro screw (5/16 ) GF83001K 500 WW59920 1,000 13mm Euro screw (1/2 ) Pan head GF13398 500 WW60200 1,000 covercaps Description Item # ox Qty M Nickel Plated Full Overlay Nexis Hinge Cover Cap GF514.300.21.0215 1,000 Nickel Plated Half Overlay Nexis Hinge Cover Cap GF514.300.22.0015 1,000 N lack Plastic Full & Half Overlay & Inset Nexis Hinge Cover Caps GF514.000.22.9662 1,000 800-UY-AER (289-2237) www.baersupply.com Fax: 888-558-2237-53
salice hinge accessories salice hinge accessories Packing: As shown below. Sold in: oth broken and full box quantities. Discount available for full box orders. A C D E F G H I J K L Type Description ox Qty A Hinge Dowels 8mm hinge dowels for Series 200 hinges US2R660XY 1,000 Hinge Dowels 8mm hinge dowels for Series S face frame hinges US10E60XY 1,000 C Dowel Screws Screws for both dowel types UV284X114 1,000 D Stop Device Limits 165 or 155 degree hinge to 120 degrees US2AF37X3 100 E Stop Device Limits 165 or 155 degree hinge to 110 degrees US2F37XY 100 F Stop Device Limits 94 degree hinge to 86 degrees US2A637XF 500 G Hinge Arm Cover Cap lack or white color without logo US28683A1 White US28683A3 lack 100 H Salice Screw Driver Pozi drive screw driver UD2A7XCXCP 1 I J K L Not Pictured 12mm Depth Gauge (Gray) 13.5mm Depth Gauge (White) 15.5mm Depth Gauge (lack) Silentia Hinge Cup Spacers Used to verify 12mm Salice Silentia hinge cup boring depth Used to verify 13.5 mm Salice Silentia hinge cup boring depth Used to verify 15.5mm Salice Silentia hinge cup boring depth.6mm spacer for 110 hinge 1.2mm spacer for 110 hinge 1.8mm spacer for 110 hinge.6mm spacer for 155 hinge 1.2mm spacer for 155 hinge 1.8mm spacer for 155 hinge UD1A6ACGSN 1 UD7A6AC1SN 1 UD2A6AC3SN 1 US2XX86T US2XX86AT US2XX86KT USXF86XT US2XF86AT US2XF86KT Insertion Ram Insertion Ram for lum Mini Press Hinge Machine UTKRAM110FF 1 Insertion Ram Insertion Ram for 165 degree hinge, lum Mini Press Machine UTRAM165 1 1,200-54 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!