MS555200TX-ESPRESSO FINISH For assistance with assembly contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com www.seidal.com PO:
Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Do not return to store/retailer. Using hardware that is too long will cause damage. Before beginning assembly, separate each type of hardware. Carefully study the hardware diagrams below. You may receive extra hardware with your unit. A B C D E Drawer Face Panel F Drawer Left Side Panel G Drawer Right Side Panel Drawer Bottom Panel H I J Drawer Back Panel Lower Drawer Bottom Panel Lower Drawer Back Panel Lower Drawer Left Side Panel K L M Lower Drawer Right Side Panel of 3 N Bottom Panel Left Middle Panel Right Middle Panel Middle Fixed Shelf O P Q Left Fixed Shelf R Right Fixed Shelf Left Side Panel Right Side Panel S T U Support Post V Top Panel Left Door Right Door Side Back Panel W X Y Z Upper Middle Back Panel Lower Middle Back Panel Left Adjustable Shelf Right Adjustable Shelf
Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Do not return to store/retailer. Using hardware that is too long will cause damage. Before beginning assembly, separate each type of hardware. Carefully study the hardware diagrams below. You may receive extra hardware with your unit of 32 of 38 (3) (4) (5) (6) (7) of 37 Magnet 3.5mm x 15mm Screw For Magnet (8) 4 3.5mm x 12 mm Screw For Back Metal Knob 5/32 x 22mm Bolt For Metal Knob Metal Nut (9) (10) 4 (11) (12) 3/16 x 32mm Bolt For Drawer Handle 5/32 x 9mm Bolt For Handle Metal Pin (13) (14) of 6 (15) (16) 8mm x 50 mm Long Wood dowel 6mm x 30 mm Small Wood dowel Bolt For Support Post Bracket (17) (18) (19) (20) 3.5mm x 15 mm Screw For Bracket Plastic Anchor 7mm x 38mm Screw For Wall Plastic Chain Care and Cleaning Instructions: Before using, wipe with a clean, dry cloth. Periodically apply furniture wax to renew the finish. Avoid rubbing or scratching the Assembly Tool Required No. 2 Phillips Screwdriver surface with rough or abrasive objects. For replacement parts or questions, please call Customer Service at 1-800-633-5096. Do not return product to store. Please call manufacturer for assistance, questions or parts. Assembly Tool Required No. 2 Phillips Screwdriver (Not Included)
: Wood may scratch easily. Be careful when assembling. Do not scratch. Step 1. Unpack and lay parts on clean, padded surface like carpet or blanket. Check that you have all parts indicated on the front page. Step 2. Insert the s into predrilled holes in Right Middle Panel(L). Step 3. Attach Right Middle Panel(L) to the Bottom Panel(J) with Bolt as pictured. Figure 1 Step 1. Insert the Long Wood Dowels(13) into predrilled holes in Middle Fixed Shelf(M) and Insert the s into predrilled holes in Middle Fixed Shelf(M) as pictured. Step 2. Attach the Middle Fixed Shelf(M) to the Right Middle Panel(L) as pictured. Figure 2 (13) 8mm x 50 mm Long Wood Dowel of 6
Step 1. Insert the s into predrilled holes in Left Middle Panel(K). Step 2. Attach the Left Middle Panel(K) to the Center Fixed Shelf(M) and Bottom Panel(J) with Bolt, then fasten them. Figure 3 Step 1. Attach the Magnet(3) to predrilled holes in the Fixed Shelves(N,O) with Screw For Magnet(4), then fasten them. Figure 4 (3) (4) Magnet 3.5mm x 15mm Screw For Magnet Step 1. Attach the Support Post(R) to the Bottom Panel(J) with Bolt, then fasten them. Step 2. Attach the Bolt For Support Post(15) to the Support Post(R). Step 3. Attach the Left Fixed Shelf(N) to the Left Middle Panel(K) and Right Fixed Shelf(O) to the Right Middle Panel(L) with Bolt, then fasten them. Figure 5 (15) of 6 Bolt For Support Post
Step 1. Insert the s into predrilled holes in Bottom Panel(J) and Fixed Shelves(N,O). Step 2. Attach Side Panels(P,Q) to the Bottom Panel(J) and Fixed Shelves(N,O) with Bolt,then fasten them. Figure 6 Step 1. Insert the s into predrilled holes in Side Panels(P,Q) and Middle Panels(K,L). Step 2. Attach Top Panel(S) to the Side Panels(P,Q) and Middle Panels(K,L) with Bolt, then fasten them. Step 3. Attach the Left Door(T) to the Left Side Panel(P) and Right Door(U) to the Right Side Panel(Q). Step 4. Attach Metal Knob(6) to Doors(T,U) with Bolt For Metal Knob(7). Figure 7 (6) (7) Metal Knob 5/32 x 22mm Bolt For Metal Knob Step 1. Attach the Back Panel(V,W,X) as pictured with Screw For Back(5). Figure 8 (5) of 37 3.5mm x 12 mm Screw For Back
Figure 9 Step 1. Insert Nut(8) into predrilled holes on Drawer Face Panel(A). Step 2. Attach Drawer Side Panels(B,C) to Drawer Face Panel(A) with Bolt for Drawer(9) through outer predrilled holes in Drawer Side Panels(B,C) as pictured. Step 3. Put the Drawer Bottom Panel(E) into inner grooves of Drawer Side Panels(B,C) and Drawer Face Panel(A). Step 4. Insert Nut(8) into predrilled holes on Drawer Back Panel(E), then be attach Drawer Back Panel(E) to end side of Drawer Side Panels(B,C), fasten with Bolts for Drawer(9). Step 5. Attach Handle(10) to Drawer Face Panel(A) with Bolt For Handle(11). (8) (9) (10) (11) Metal Nut 3/16 x 32mm Bolt For Drawer Handle 5/32 x 9mm Bolt For Handle Step 1. Insert the Small Wood Dowels(14) and Nut(8) into predrilled holes on Lower Drawer Bottom Panel(F). Figure 10 Step 2. Attach Lower Drawer Back Panel(G) to Lower Drawer Bottom Panel(F) with Bolt for Drawer(9) through outer predrilled holes in Lower Drawer Back Panel(G). (8) Metal Nut (9) (14) 3/16 x 32mm Bolt For Drawer 6mm x 30 mm Small Wood Dowel
Figure 11 Step 1. Insert the Small Wood Dowels(14) and Nut(8) into predrilled holes on Lower Drawer Bottom Panel(F) and Lower Drawer Back Panel(G). Step 2. Attach Lower Drawer Side Panel(H,I) to Lower Drawer Back Panel(G) and Lower Drawer Bottom Panel(F) with Bolt for Drawer(9) through outer predrilled holes in Lower Drawer Side Panel(H,I). Step 3. Attach Handle(10) to Lower drawer face panel with Bolt For Handle(11). (8) of 6 Metal Nut (9) (10) (11) (14) 3/16 x 32mm Bolt For Drawer Handle 5/32 x 9mm Bolt For Handle of 6 6mm x 30 mm Small Wood Dowel Step 1. Place Drawer on Middle Panels. Step 2. Insert Wood Dowels into predrilled holes Drawer Side Panel(B,C). Step 3. Insert the Metal Pins(12) into desirous holes of inner Side Panels(P,Q) and Middle Panels(K,L). Step 4. Put the Adjustable Shelves(Y,Z) on the Metal Pins(12) in each section. Figure 12 (12) Metal Pin
Step 1. Attach Bracket(16) to the Side Panels(P,Q) with Screw For Bracket(17). Step 2. Drill 1/4 pilot holes in near proximity of the Bracket(16) attached to the Side Panels(P,Q) and tap the Plastic Anchor(18) into wall. Step 3. Fasten Bracket(16) using Screw For Wall(19) into the Plastic Anchor(18). Figure 13 (16) (17) (18) (19) Bracket 3.5mm x 15 mm Screw For Bracket Plastic Anchor 7mm x 38 mm Screw For Wall Step 1. Move this item to the fastened wall Bracket(16) and tie in both Bracket(16) with Plastic Chain(20) as shown in diagram. Figure 14 (20) Plastic Chain
Parts Replacement Form Customer Information Name Address City/State/Zip Code Phone Number Please indicate where you purchased this item: Store/Website/Catalog Please indicate color/size/style number: Style No Parts Letter Parts Description Needed Please immediately examine this product carefully. Any request for missing parts or damage replacement must be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time frame. Parts will not be available for items arriving fully assembled. We do not recommend modifying product(s) and we are not responsible for any damages due to product modification(s). If damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement merchandise. Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am 4pm Mon-Fri Central time if you have product issues or email us at service@seidal.com. Please ask for customer service representative for issues involving damages or replacement parts. Please ask for technical assistance representative for any issues with product and assembly/construction. Please contact the retailer that you purchased from for returns. Customer Service 1-800-633-5096 service@seidal.com Southern Enterprises, Inc. 600 Freeport Parkway, Suite 200 Coppell, Texas, 75019
CAUTION The top shelf is intended for a flat screen television with a maximum overall width 6 and supports up to 175 lb. The top shelf is NOT INTENDED for tube televisions. Each center shelf should not be loaded with more than 20 lb. Each side shelf should not be loaded with more than 15 lb. DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the maximum sizes and weights indicated may result in instability causing possible injury. This unit contains a permanent warning sticker located on under side of top shelf or inside drawer. Do not allow children under 16 years to move the cart. Model: MS555200TX Porter Gaming/Media Console Southern Enterprises, Inc 600 Freeport Parkway, Suite 200 Coppell, Texas, 75019 Manufacture Date: 11/10/2011