Huawei elte Trunking Features
Today s communication landscape is changing quickly. Voice communications alone cannot satisfy enterprise requirements for staff interaction and information sharing, and data services are increasingly critical for meeting strategic objectives. Emergency response and public safety: A single network with advanced technology providing both traditional Private Mobile Radio (PMR) and broadband services, including images, data, and video, speeds responses and saves lives. Metro: With the development of the metro industry, operators need faster, more efficient, and safer travel, and passengers expect a more comfortable trip. Train-to-ground broadband networks providing Closed Circuit Television (CCTV), Wi-Fi, Passenger Information System (PIS), and a Communication-Based Train Control System (CBTC) carrier have become imperative. Airport authorities and port areas: Guaranteeing the quality of ground or yard services and minimizing delays, through the delivery of simultaneous voice, data, and video, are urgently required to reduce operating costs. Other industries: In oil and gas, the smart grid, and mining, smart data terminals are often dispersed in remote areas where real-time wireless data acquisition and on-site video are more convenient and effective than wired technology to ensure staff and product safety. The Huawei elte solution is based on advanced LTE technology to provide professional broadband trunking, data, video surveillance, and other broadband services on a single network with 100 Mbit/s throughput and low-latency transmission. It enhances operational efficiency and safety and opens up a variety of services not previously available.
The Huawei elte broadband trunking solution is based on the most-advanced LTE technology, to provide professional services for enterprise, such as broadband trunking, video surveillance, data acquisition, broadband data access, emergency communications, and other broadband services on a single network. 100 Mbit/s multimedia trunking and dispatching visualization Multiband, critical networking resilience, and ruggedized devices for harsh environments Open architecture for third-party devices and applications, interoperable with TETRA, PLMN, PSTN, etc. Huawei elte Broadband Trunking Features Visualized Dispatching Fast Response Informed Decision-Making
Enhanced Voice Dispatching Services Group Call/Broadcast Call Group call is point-to-multipoint call between a UE and multiple independent dispatching consoles which enables a UE or a dispatching console to establish point-to-multipoint calls. Broadcast call is a point-to-multipoint (P2MP) call initiated by the dispatching console only and the floor can t be preempted. Broadcast group calls include network-wide broadcast groups and areaspecific broadcast groups. All UEs in a specified area can receive broadcast calls. Group Call/Broadcast Call Broadcast Medical Group Police Group Fireman Group Private Call Private calls (P2P calls) in full-duplex mode are enabled between trunking users, between trunking users and dispatching console users, or between dispatching users. Private calls are in point-to-point full-duplex mode, which ensures that only the two parties in a private call can hear each other. Hello Private Call Hello Emergency Call Emergency calls have the highest priority. With this feature, information is reported to predefined users promptly in emergency. User can press the emergency call button on top of a terminal to start an emergency call without dialing or pressing the PTT button. Emergency Call Emergency 6 Huawei elte Trunking Features
DMO DMO is a supplementary function and can be used for communication when an area has no LTE signal. In DMO mode, a user can talk to other users on the same frequency after pressing the PTT button on the UE. When the speaker is talking, other users cannot preempt the floor. After the floor is released, other users can press the PTT to talk. DMO Priority Call/Pre-emptive Call This basic feature enables UEs to preempt the floor based on their priorities after a group call is set up. When a UE applies for the floor but the speaker already exists, the dispatching system compares the priority of the UE applying for the floor with that of the speaker. If the speaker has a lower priority, the dispatching system releases the floor and allocates it to the UE applying for the floor. If the speaker has a higher priority, the dispatching system does not release the floor. During the floor release, the UL voice resources of the former speaker are also released. The former speaker then becomes a listener. Mobile command vehicle Fireman Normal priority Priority Call/Pre-emptive Call Police Normal priority Command center Command & Dispatch Convergence dispatch Rescue team Higher priority Supervisor Higher priority handset expert Huawei elte Trunking Features 7
Enhanced Video Services Video Upload and Video Dispatch Videos can be transmitted to the dispatching console from the handset terminal through a backhaul over the LTE wireless network. Both the dispatching console and handset terminal can initiate video upload, and sound can be enabled or disabled based on customer requirements. The dispatching console also can send one line of video to one or multiple specified terminals. The user can play the received video and choose to enable or disable sound. Dispatching Console EP680 EP680 EP680 Video Projection The dispatching console can project real-time video services to large screen to optimum resolution and wide visual range. Dispatching Console TV Wall EP680 EP680 EP680 8 Huawei elte Trunking Features
Enhanced GIS GIS Service With GIS feature, handset terminals can report real-time GPS location data to geographic information system (GIS) through elte network, and the dispatching console can display the location data on GIS map. The handset terminal can enable or disable GPS location according to the command from the dispatching console. GIS User Mapping and Grouping A dispatch person can circle a certain range on the map and initiate a group call to all terminals within this circle. Group Circling Tracing and Playback Dispatch console can select a terminal to perform real-time tracing. The traced terminal reports its GPS location information in real time. The dispatching console can display all GPS locations of traced terminals after automatic tracing is enabled. Dispatch console also can query the GPS data of a terminal within a specified period, and play back the track on the GIS interface. The search criteria include: terminal ID, start time and end time. Dispatch console can play back the track of a terminal over the last 30 days. Tracking Tracking and Playback John: 10:00AM Playback John: 10:30
Interoperability Broadband Trunking with Telepresence Video uploaded by onsite staff can be forwarded to other terminals or Telepresence system by dispatcher. EP820 with Telepresence client can access video conference for quick decision making. Dispatching Console Video Conference LTE EP680 EP680 EP680 EP820 Interconnect with PSTN/TETRA/PLMN PSTN gateway connects to the PSTN through the E1/EXO interface, each gateway's specifications is 90 channels. TETRA gateway supports connecting to TETRA network through TETRA cab radio, and the gateway supports a maximum of four channels of group calls (four groups) concurrently. PLMN gateway supports eight GSM or CDMA P2P calls on the condition that customers provide SIM cards of gateway. Each SIM card supports one P2P call. Dispatching Server elte PLMN Gateway PSTN Gateway Trunking Gateway Tetra Radio GSM/CDMA PSTN Tetra Accessing elte by Commercial Handset Carrier handsets can access elte network directly or through WiFi function of CPE and EM720 for VoIP, video, SMS, and GIS. elte Network tapp also can be installed on common android terminals to achieve trunking service in elte network. EM720 CPE elte band 10 Huawei elte Trunking Features
Flexibility Flexible Networking to Improve System Availability Satellite transmission over the S1 interface supports the following services: voice P2P calls, voice group calls, video, and other services. Microwave transmission over the S1 interface supports the following services: voice P2P calls, voice group calls, video, and other services. enb VSAT Microwave VSAT CNS/SCN GE/FE enb OMC Hierarchical Networking Emergency communication vehicle and isolated sites can be configured in hierarchical mode to expand network coverage for the enterprise network or to fill coverage holes. In hierarchical mode, one dispatcher serves as the upper-level dispatcher and other dispatchers serve as lower-level dispatchers. Voice or video service exchanged between two lower-level UEs served in different lower-level dispatchers must be transferred through the upper-level dispatcher. Voice roaming Dispatching between high and low levels Dispatching between same level enodeb Sharing enodeb sharing refers to the RAN partially or fully shared by multiple private network CNs. With this feature, carrier and base station resources are shared by operators, overcoming the difficulty in applying for frequencies and saving the investment cost. In addition, these operators run their own independent service to isolate service data. For example, production data and management data can be isolated in the electric power industry. Sharing with departments Sharing among industries Department 1 Department 2 Industry 1 Industry 2 High priority service Low priority service All services All services Huawei elte Trunking Features 11
Openness Open Interface for 3rd-party Dispatching Console Be accustomed to the existing dispatching console, the Software Development Kit (SDK) is provided for enterprise users to develop the interface to third-party dispatching console seamlessly integrates services of the elte system. These services include voice (point-to-point call and group call), video, SMS, MMS, and GIS positioning services. Huawei Dispatching Server Socket + JSON SDK Dispatching Console on Pad Police Command Center Huawei Dispatching Console Enterprise Operation Desk 12 Huawei elte Trunking Features
Open API for Inter-system Dispatching SDK interface is available for secondary development for interworking with third-party systems such as the TETRA system, PDT system, POC system, and video surveillance system. The SDK includes interfaces for voice (P2P and group), video, SMS, and MMS services, and bi-directional service interconnection is supported. Voice User Info Message Video Position 3 rd Party Gateway with elte SDK elte SDK Tetra SDK Standard Protocol (ONVIF/RTSP) Tetra Dispatching Server elte Dispatching Server GIS Application Video Conference System Open Interface to Upper OMS for Simple and Centralized Management eomc supports third-party SNMP northbound interfaces (NBI) for managing resources and reporting alarms, facilitating interconnection with the upper-level management system. NEs and alarm information are reported to the upper-level management system through these NBIs, which helps integrate into the existing user management system. User/Group Management Device/VPN Management Number / Parameter Management Open API Enterprise OSS Enterprise NMS SNMP Alarm Management Data Check and Query Data Synchronization User info available to existing OSS, easy user management Network info available to existing NMS, efficient centralized management eomc910 Terminal Secondary Development Mini PCIe Card can function as the modem platform provided for the cooperative partner. Partner can use such platforms together with the APP system to develop various types of UEs and client software. Port Vehicle Terminal TOS Mini PCIe Card Single Soldier Unit TAU Dust/water/shock proof PAD Dust/water/shock proof Handset Vehicle Mounted Device Touch Screen Handset Huawei elte Trunking Features 13
Security End-to-End Encryption End-to-End Encryption can encrypt PTT voice stream, private call voice stream and short message to prevent eavesdropping on the sensitive communication. The terminal that supports E2E encryption should be equipped with a TF encipher card, which be authenticated by the KDC. When initiating an enciphered call, a caller obtains a session key from the KDC through the eafe, and the KDC distributes the session key to the callee. The caller will encipher the voice stream by the TF module, and the callee will decipher the voice steam with the same session key. The network only transmits the stream that can t be decrypted. EMU EMU Integrated firewall Key Dispatching IP Backhaul Key Dispatching Security Gateway Encryption Server PTT Server EPC IP Transport Core Firewall PSTN/PLMN Internet VPN The VPN feature allows customer to share the network infrastructure with functions of private networks for special group users in the dispatching system. Physically, different groups share one network infrastructure. Logically, users, groups, dispatching server, audio and video server, and gateways are divided to different network permissions. Application Server@VPN1 VPN1 ecns VPN2 Application Server@VPN2 10.168.1.2 10.168.1.3 10.168.1.4 10.168.1.2 10.168.1.3 10.168.1.4 Remotely Enable/Disable Terminal In the situation that a UE in a private network is lost, system can remotely deactivate or activate the UE to guarantee the safety of the network. Remote Enable/Disable Disable Enable 14 Huawei elte Trunking Features
Reliability Fallback Mode Fallback mode allows the enodeb disconnected from the CN to support basic functions of PTP calls and group calls within its coverage area to improve system reliability. Fall Back Mode PTP + Group call + Monitoring CN Geographical Redundancy This feature implements NE-level 1+1 cold redundancy of CNs by reuse the S1-flex load balancing algorithm in case of regional disasters. The active and standby NEs will periodically check the status of each other using handshaking. If handshaking is normal, each NE considers that the peer NE is normal. If the active NE becomes faulty, the standby NE detects the fault by heartbeat detection, and switches to the active state within 3 minutes. ecns enodeb Normal Situation ecns enodeb ecns enodeb Disaster Situation ecns enodeb NodeB Board Redundancy If an LBBP is faulty or its resources are insufficient, the cell served by the LBBP can t be dynamically reestablished on the LBBP. With inter-lbbp redundancy, the cell can be reestablished on another LBBP with available resources or on a backup LBBP. In this way, services in the cell can automatically recover and service interruption duration is reduced. RRU RRU RRU PWR FAN LBBP LBBP LMPT PWR Huawei elte Trunking Features 15
QoS QoS Management The ecns, escn, and enodeb support bearer-level QoS control to ensure end-to-end (E2E) QoS in elte network. The QoS Management feature involves radio resource processing over the air interface, and provides dynamic scheduling, semi-persistent scheduling, and adaptive modulation and coding (AMC). The QoS Management feature can guarantee QoS for GBR(Guaranteed Bit Rate) and non-gbr services and achieve an optimal tradeoff among throughput, fairness, and QoS. QoS Control Per User QoS Control Per Service Default Bearer Golden User Silver User Bronze User Without QoS control, all services carried by default bearer Resources are fairly shared Default Bearer Throughput elte Dedicated Bearer With QoS control, critical services carried by dedicated bearer, throughput and performance are guaranteed 16 Huawei elte Trunking Features
Copyright Huawei Technologies Co., Ltd. 2015. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademark Notice, HUAWEI, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned are the property of their respective owners. General Disclaimer The information in this document may contain predictive statements including, without limitation, statements regarding the future financial and operating results, future product portfolio, new technology, etc. There are a number of factors that could cause actual results and developments to differ materially from those expressed or implied in the predictive statements. Therefore, such information is provided for reference purpose only and constitutes neither an offer nor an acceptance. Huawei may change the information at any time without notice. HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Version No.: M3-035554-20150629-C-1.0 e.huawei.com