Channel Creasing Matrix Channel Creasing Matrix offers a wide selection of Matrix in original metalbased, vulcanized fiberboard and plasticbased creasing matrix, as well as related tools. Matrix Types CHANNEL CREASING MATRIX, INC. Standard Center Crease is used for a Single Crease and is suitable for board thicknesses from.003 to.070. OffCenter Crease can be combined to form a double crease or used where a cutting rule is close to the creasing rule. Available in #OC, #OC & #OC. Boxed quantities: # to # matrix 48 feet per. # to #2 and double crease matrix feet per. Selection Chart for Original Matrix and Creasing Rule. Paperboard.006.008.010.012.014.016.018.020.022.0.026.028.030.0.034.036.038.0.044.048.052.056.0.064.068.072 For 1pt. For 2pt. For 3pt. 83 83 DoubleCrease Matrix is used for multiple creases such as file folders and brochures. Center to center dimensions of the channels are 1/8, 3/16 and 1/4 in #. Also available in 1/4 in #. For 4pt. 1 1 1 2 2 For 6pt. 2 2 2 Reverse Crease Matrix acts as the male rule and is used to accomplish crease in reverse. Two rules in the die act as the channel. See CCM catalog for sizes. Crease Height Using.937 Cut.921.919.917.915.913.911.9.7.5.3.1.899.897.895.893.891.889.887.883.879.8.871.8.863.859.855 Crease Height Using.918 Cut.2.0.898.896.894.892.8.888.886.884.882.880.878.876.874.872.870.868.864.8.856.852.848.844.8.836 The column that appears first in a particular row is the size of matrix and creasing rule recommended for best results with the perfect board. Some changes may be necessary due to board variation due to moisture content. TollFree: (800) 4234478 TollFree Fax Orders: (866) 78637 TollFree: (800) 26695 TollFree Fax Orders: (800) 4466651 More Channel Creasing Matrix next page... TollFree: (800) 3347914 TollFree Fax Orders: (800) 55491 1
Go on a time diet, with Marathon Matrix VF! Marathon Matrix VF assures quick and easy makeready, reliable and accurate registration, and a high quality crease, run, after run, after run. All Marathon Matrix VF comes labeled with sizing information right on the product, for easy identification. With its vulcanized fiberboard construction, Marathon Matrix VF allows for unsurpassed durability and registration for runs short or long. Marathon Matrix VF Application Chart Board.006.008.010.012.014.016.018.020.022.0.026.028.030.0.034.036.0 Crease Rule 1 pt. 1 pt. 11/ 11/ 11/ Crease Rule Height Range*.927.931.925.929.925.929.923.927.923.927.921.925.921.925.919.923.917.921.915.919.913.917.911.915.9.913.9.913.7.911.5.9.3.7.1.5.1.5.898.3.898.3.897.1.897.1.893.897 With Grain Across Grain Extra Depth VF12 VF12 VF12 VF12 VF12 VF12 VF12 VF1648 VF1648 VF72 VF80 VF VF28 VF100 VF VF VF12 VF12 VF12 VF12 VF18 VF12 VF18 VF1664 VF2072 VF72 VF VF VF VF VF VF136 N /A N/A VF16 VF161648 VF16 VF161648 VF20482056 VF20482056 VF20562064 VF6472 VF6472 VF80 VF288028 VF28 VF100 VF100 VF100110 VF110 VF110 VF110 VF110 VF VF136 Please see next page for a complete listing of available sizes. *Values are for.937 cutting rule. When using other cutting rule heights, appropriate adjustments must be made. Tips on using Channel Creasing Matrix: Channel width can be determined by multiplying the board thickness by a factor or 1.5 or 2.0 and adding this amount to the crease rule thickness. Crease rule height is generally determined by subtracting the board thickness from the cutting rule height. It may be necessary to vary the creasing rule height due to board type, bond strength, moisture content or thickness variations. Depending upon the board type, it may be necessary to run a more narrow or deeper channel on with grain creases to obtain the desired result. Due to wide variations in board quality, moisture content, coatings and bending characteristics, some experimentation may be necessary. The guidelines are only a foundation on which special exceptions should be built. More Channel Creasing Matrix next page... TollFree: (800) 4234478 TollFree Fax Orders: (866) 78637 TollFree: (800) 26695 TollFree Fax Orders: (800) 4466651 TollFree: (800) 3347914 TollFree Fax Orders: (800) 55491 2
Marathon Matrix VF part numbers and sizes The first 2 digits of each part number represent the depth of the channel and the last 2 or 3 digits represent the width of the channel, both figures are in thousands of an inch. For example: 12 =.012 channel depth and.0 channel width. VF12 VF2048 VF2864 VF80 VF12 VF2052 VF2868 VF VF12 VF2056 VF2872 VF100 VF18 VF20 VF2880 VF110 VF1252 VF28 VF VF1256 VF2068 VF136 VF2072 VF16 VF2080 VF72 VF16 VF80 VF1648 VF56 VF VF1652 VF VF100 VF64 VF16 VF68 VF VF1664 VF72 VF136 VF1668 VF80 VF12 VF More Channel Creasing Matrix next page... TollFree: (800) 4234478 TollFree Fax Orders: (866) 78637 TollFree: (800) 26695 TollFree Fax Orders: (800) 4466651 TollFree: (800) 3347914 TollFree Fax Orders: (800) 55491 3
THE REVOLUTIONARY NEW WAY TO CREASE. PLASTRIX is a tough, onepiece polymer matrix with a specially tapered edge that allows for high press speeds without the need for taping or ramping. PLASTRIX features a unique radiusprofile that reduces draw on material being scored. Produced with an accurate, thermallybonded locator system, which allows for easy installation and no residue to remove. PLASTRIX is a tough, onepiece polymer matrix with a specially tapered edge that allows for high press speeds without taping or ramping. PLASTRIX has a speciallyformulated nonmigrating adhesive that stays put for the duration of the run. PLASTRIX matrix is produced with an accurate, thermallybonded locator system that allows for simple installation and leaves no adhesive residue to remove. Please refer to the handy sizing information on the next two pages! TollFree: (800) 4234478 TollFree Fax Orders: (866) 78637 TollFree: (800) 26695 TollFree Fax Orders: (800) 4466651 TollFree: (800) 3347914 TollFree Fax Orders: (800) 55491 4
Plastrix Size Chart Board Creasing Rule 1 pt. 1 1/ 6 pt. 8 pt. 0.006 0.008 0.01 0.012 0.014 0.016 0.018 0.02 0.022 0.0 0.026 0.028 0.03 0.0 0.034 0.036 0.038 0.04 0.042 0.044 0.046 0.048 0.05 0.052 0.054 0.056 0.058 0.06 0.062 0.064 0.066 0.068 0.07 0.072 0.074 0.076 0.078 0.08 0.09 45 45 55 65 70 80 85 95 100 100 110 1 1 1 1 1 1 2 2 2 2 HEIGHT FORMULA: CUTTING RULE HEIGHT minus BOARD THICKNESS minus.005 (for 1/2 ) or.010 (for 1/4 ) = creasing rule height. TollFree: (800) 4234478 TollFree Fax Orders: (866) 78637 Plastrix Part Numbers & Color Codes on next page! TollFree: (800) 26695 TollFree Fax Orders: (800) 4466651 TollFree: (800) 3347914 TollFree Fax Orders: (800) 55491 5
Plastrix Part Numbers & Color Codes # Black Part# 3802 1/4 wide, 96 ft. / Part# 3801 1/2 wide, ft. / # White Part# 3800 1/4 wide, 96 ft. / Part# 3801 1/2 wide, ft. / 65 #65 Violet Part# 3806 1/4 wide, 96 ft. / Part# 380651 1/2 wide, ft. / 80 #80 Marine Blue Part# 380800 1/4 wide, 96 ft. / Part# 380801 1/2 wide, ft. / # Orange Part# 3800 1/4 wide, 96 ft. / Part# 3801 1/2 wide, ft. / 55 #55 Mulberry Part# 3805 1/4 wide, 96 ft. / Part# 380551 1/2 wide, ft. / 70 #70 Ice Blue Part# 380700 1/4 wide, 96 ft. / Part# 380701 1/2 wide, ft. / 85 #85 Rose Part# 3808 1/4 wide, 96 ft. / Part# 380851 1/2 wide, ft. / # Buff Part# 3800 1/4 wide, 96 ft. / Part# 3801 1/2 wide, ft. / # Yellow Part# 3800 1/4 wide, 96 ft. / Part# 3801 1/2 wide, ft. / # Green Part# 3807 1/4 wide, 96 ft. / Part# 3801 1/2 wide, ft. / # Red Part# 3800 1/4 wide, 96 ft. / Part# 3801 1/2 wide, ft. / 45 #45 Pink Part# 3804 1/4 wide, 96 ft. / Part# 380451 1/2 wide, ft. / D #D Brown (deeper channel) Part# 380D 1/4 wide, 96 ft. / Part# 380E 1/2 wide, ft. / D #D Gray (deeper channel) Part# 380D 1/4 wide, 96 ft. / Part# 380E 1/2 wide, ft. / D #D (deeper channel) Part# 380D 1/4 wide, 96 ft. / 95 #95 Gold Part# 3809 1/4 wide, 96 ft. / Part# 380951 1/2 wide, ft. / 100 #100 Renol Yellow Part# 3801000 1/4 wide, 96 ft. / Part# 3801001 1/2 wide, ft. / # Blue Part# 38010 1/4 wide, 96 ft. / Part# 3801 1/2 wide, ft. / 110 #110 Purple Part# 3801100 1/4 wide, 96 ft. / Part# 3801101 1/2 wide, ft. / #/3/4 Brown Part# 384 1/2 wide, ft. / #/6 Brown Part# 386 1/2 wide, ft. / #/8 Brown Part# 388 1/2 wide, ft. / 1 2 #1/3/4 Gray Part# 3814 1/2 wide, ft. / #1/6 Gray Part# 3816 1/2 wide, ft. / #1/8 Gray Part# 3818 1/2 wide, ft. / #/4 Black Part# 384 1/2 wide, ft. / #/6 Black Part# 386 1/2 wide, ft. / #/8 Black Part# 388 1/2 wide, ft. / #2/4 White Part# 38 1/2 wide, ft. / #2/6 White Part# 3826 1/2 wide, ft. / #2/8 White Part# 3828 1/2 wide, ft. / Offcenter and Double Plastrix # Buff Offcenter Part# 39 1/4 wide, 96 ft. / Part# 3961 1/2 wide, ft. / # Yellow Offcenter Part# 3961 1/4 wide, 96 ft. / Part# 396610 1/2 wide, ft. / Plastrix for Offset Presses # Buff Double Part# 396410 1/8 double, ft. / Part# 396420 3/16 double, ft./ Part# 3964 1/4 double ft. / All sizes above 1/2 wide. # Yellow Double Part# 396610 1/8 double, ft. / Part# 396620 3/16 double, ft. / Part# 3966 1/4 double ft. / All sizes above 1/2 wide. # White Offcenter Part# 39 1/4 wide, 96 ft. / Part# 3961 1/2 wide, ft. / # White Double Part# 396510 1/8 double, ft./ Part# 396520 3/16 double, ft./ Part# 3965 1/4 double ft. / All sizes above 1/2 wide. # Black for Offset w/loc tape Part# 3702, 35 ft. / # Orange for Offset w/loc tape Part# 3700, 35 ft. / # Buff for offset w/loc tape Part# 3700, 35 ft. / # White for Offset w/loc tape Part# 3700, 35 ft. / Channel Creasing Matrix tools next page... TollFree: (800) 4234478 TollFree Fax Orders: (866) 78637 TollFree: (800) 26695 TollFree Fax Orders: (800) 4466651 TollFree: (800) 3347914 TollFree Fax Orders: (800) 55491 6
CCM Bench Miter Press MultiCutter CCM Bench Miter Press This rugged bench miter press can miter two ends of matrix at one time! Reversible cutting anvil for long life. Guides for both 1/4 and 1/2 width matrix. MultiCutter features easygrip handles and spare blades with caddy that stores in the handle. Great for cutting and trimming all types of nonmetallic matrix and other nonmetallic materials. Matrix Miter Pliers Dolphin Cutter Matrix Miter Pliers feature spring action and three different guide sizes for three widths of matrix up to 1/2. Replacement brass beds and blades are also avaialble (inset photos). Dolphin Cutter makes easy angle cuts on matiix and other materials. Handy scribed cutting guide for easy position of material to be cut or trimmed. TollFree: (800) 4234478 TollFree Fax Orders: (866) 78637 TollFree: (800) 26695 TollFree Fax Orders: (800) 4466651 TollFree: (800) 3347914 TollFree Fax Orders: (800) 55491 7