STEEL BLANKS. u f q t PRECISION GROUND HIGH SPEED. CALL TOLL FREE CATALOG AVAILABLE ON CD ROM

INSPECTION & GAGING TOOLS SHOP TOOLS & SUPPLIES CUTTING TOOLS LINEAR MOTION COMPONENTS MOLD & DIE SUPPLIES PRECISION GROUND HIGH SPEED STEEL BLANKS DRILL & REAMER BLANkS INSPECTION & GAGING CALL TOLL FREE -800-544-794 WWW.HSSBLANkS.COM CATALOG AVAILABLE ON CD ROM PAGE -8 CUTTING T OLS PAGE 4-75 LINEAR MOTION COMPONENTS PAGE - 4 MOLD & DIE SUPPLIES PAGE 9-0 SHOP TOOLS & SUPPLIES PAGE 5-40 u f q t 45 LEHIGH AVE UNION, NJ 0708-79 PAGE 4- CATALOG No. 0

DRILL & REAMER BLANkS WIRE SIZE HUTCHINSON HSS BLANkS Length M M4 Wire Decimal Overall Net Price Net Price Size Equivalent Inches Each Each.80 7 /8.48.74.0 7 /8.48.74.0 /4.48.74 4.090 /4.48.74 5.055 /4.48.74.040 /4..4 7.00 5 /8..4 8.990 5 /8..4 9.90 5 /8..4 0.95 5 /8..4.90 /.94.9.890 /.94.9.850 /.8.8 4.80 /.8.8 5.800 /.8.8.770 /8.8.58 7.70 /8.8.58 8.95 /4.8.58 9.0 /4.5.47 0.0 /4.5.47.590 /4.5.47.570 /4.5.47.540.5.47 4.50.5.47 5.495.5.47.470.4.0 7.440.4.0 8.405.4.0 9.0.4.0 0.85 /4.4.0 Length M M4 Wire Decimal Overall Net Price Net Price Size Equivalent Inches Each Each.00 /4.8.4.0 /4.7.0.0 /4.7.0 4.0 /4.7.0 5.00 /4.7.0.05 /.7.08 7.040 /.7.08 8.05 /.7.08 9.0995 /.7.08 40.0980 /.7.08 4.090 /..00 4.095 /4..00 4.0890 /4..00 44.080 /4..00 45.080 /4..00 4.080 /4..00 47.0785.0.99 48.070.0.99 49.070.0.99 50.0700.0.99 5.070.0.99 5.05 7 /8.5.84 5.0595 7 /8.5.84 54.0550 7 /8.5.84 55.050 7 /8.5.84 5.045 /4..94 57.040 /4..94 58.040 5 /8..94 59.040 5 /8..94 0.0400 5 /8..94 CHOICE OF TOLERANCE +.000.0000 OR +.0000.000 Typical Analysis of M and M4 High Speed Steel C Cr Mo W V Co Hardness M.8 4.0 5.0.0.0 R/C -4 CUT COSTS USE HUTCHINSON HSS BLANkS FOR PUNCHES, EJECTOR PINS AND DOWELS. QUICK DELIVERY DIRECT FROM OUR PLANT NO ORDER TOO SMALL Page TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97

WIRE SIZE HUTCHINSON HSS BLANkS HUTCHINSON HSS BLANkS ARE AVAILABLE IN ANY DIAMETER.005" -.500" GROUND TO.000 TOLERANCE LENGTHS UP TO " TO SUIT YOUR REQUIREMENTS All standard size High Speed Steel blanks available for quick delivery from our plant M HSS - R/C -4 M4 HSS - R/C -8 DRILL & REAMER BLANkS Length M M4 Wire Decimal Overall Net Price Net Price Size Equivalent Inches Each Each.090 /.50.0.080 /.50.0.070 /.50.0 4.00 /.50.0 5.050 /.9..00 /.9. 7.00 /.9. /.05 /.9. 8.00 /.9. 9.09 /.8.9 70.080 /.8.9 7.00 /.8.9 7.050 /.4.99 7.040 /.4.99 74.05 /.4.99 75.00 /.4.99 7.000 /.4.8 77.080 /.4.8 78.00 /.4.8 /4.055 /.4.8 79.045 /.4.8 80.05 /.4.8 Length M M4 Wire Decimal Overall Net Price Net Price Size Equivalent Inches Each Each.090.84.5.080.84.5.070.84.5 4.00.84.5 5.050.99.74.00.99.74 7.00.99.74 /.05.99.74 8.00.99.74 9.09..8 70.080..8 7.00..8 7.050.9.75 7.040.9.75 74.05.9.75 75.00.9.75 7.000.55 5.00 77.080.55 5.00 78.00.55 5.00 /4.055.55 5.00 79.045.55 5.00 80.05.55 5.00 CHOICE OF TOLERANCE +.000.0000 OR +.0000 ONE END SOFT BLANkS AND BLANkS OF SPECIAL HARDNESS AVAILABLE QUANTITY DISCOUNTS The following discounts apply to orders for blanks of standard length and standard diameter only: 00 pieces of one size 5% 50 pieces of one size 7 /% 500 pieces of one size 0% WHEN ORDERING, SPECIFY: DIAMETER LENGTH TOLERANCES LIMITED SIZES OF M7 AVAILABLE PRICES & AVAILABILITY UPON REQUEST TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page

DRILL & REAMER BLANkS FRACTIONAL & LETTER SIZE HUTCHINSON HSS BLANkS Length M M4 Decimal Overall Net Price Net Price Size Equivalent Inches Each Each /4.055 /.48.5 /.05 /.5. /4.04875 /4..90 /.05 7 /8.5.84 5/4.0785.0.90 /.0975 /4..00 7/4.0975 /4.7.08.50 /4.9.4 9/4.405.4.0 5/.55 /4..49 /4.7875 /4.70.54.875 /.8.8 /4.05 5 /8..8 7/.875 /4.49.75 5/4.475 7 /8.9 4.0.500 4.89 4.45 7/4.55 4 /8. 5.04 9/.85 4 /4.49 5.44 9/4.9875 4 /8.78 5.97 5/.5 4 / 4.5.48 /4.85 4 5 /8 4.49.99 /.475 4 /4 4.95 7.9 /4.5975 4 7 /8 5. 8.8.750 5 5.89 9.4 5/4.905 5 /8.48 0.0 /.405 5 /4 7.. 7/4.4875 5 /8 7.90.9 7/.475 5 / 8.4.4 9/4.455 5 5 /8 9.00.9 5/.4875 5 /4 9.50 4.5 /4.48475 5 7 /8 0.5 5.70.5000 0.75.80 Letter Length M M4 Size Decimal Overall Net Price Net Price Diameter Equivalent Inches Each Each A.4 7 /8.7 4. B.8 4.7 4. C.4 4.7 4. D.4 4.89 4.45 E.50 4.89 4.45 F.57 4 /8. 5.04 G. 4 /8. 5.04 H. 4 /8. 5.04 I.7 4 /8.4 5.5 J.77 4 /4.48 5.45 K.8 4 /4.48 5.45 L.90 4 /4.55 5.55 M.95 4 /8.78 5.97 N.0 4 /8.78 5.97 O. 4 / 4.7.4 P. 4 5 /8 4.49.99 Q. 4 /4 4.5.99 R.9 4 /4 4.9 7.7 S.48 4 7 /8 5. 8.8 T.58 4 7 /8 5. 8.8 U.8 5 5.89 9.4 V.77 5 5.89 9.4 W.8 5 /8.0 9.9 X.97 5 /8.0 9.9 Y.404 5 /4.90 0.9 Z.4 5 /4 7.00 0.9 CHOICE OF TOLERANCE +.000.0000 OR +.0000.000 A NOTE TO REMEMBER: We have large stocks of semi-finished material ready to be ground to meet your requirements. CUT COSTS HUTCHINSON HSS BLANkS FOR MANDRELS AND SPECIAL END MILLS. Page 4 TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97

FRACTIONAL HUTCHINSON HSS BLANkS Length M M4 Decimal Overall Net Price Net Price Size Equivalent Inches Each Each /4.555.5 0.44 9.7 5.08 0.4 4.90 7/.55.9.00 9 4.08 7..5 48.77 5/4.54875 4.. 9 4.7 8.0.78 50.50 9/.55 5.4.9 9.4 40.0 4.8 5.84 7/4.5785 5.87.95 9 7. 4.80. 5.0 9/.5975.9 5.54 9 8.55 44.0 8.9 58.9 9/4.0975 7.9.58 9 0.5 47.40 9.85.45.50 8.8 8. 9.0 48.7 4.4 4. 4/4.405 9.8 9. 9 4.00 5.58 44.5 5.8 /.55 0.9 0. 9 4.80 5.78 45.9 9.7 4/4.7875.48.78 9 5.5 5.98 47.4 7.8 /.875.70.5 9 7.0 5.9 49. 74.57 45/4.705.7.7 9 8.50 58. 5.44 77.95 /.7875.9 5.50 9 9.87 0.4 5.5 80.48 47/4.7475 4.54.4 9 40.9.9 54.5 8..7500 5. 7. 9 4.08.7 54.8 8.79 Length M M4 Decimal Overall Net Price Net Price Size Equivalent Inches Each Each 49/4.755.7 8.9 9 4.8 4.49 57. 84.9 5/.785 7. 40.9 9 44.80.58 58.5 8.58 5/4.79875 8.57 4.4 9 4.0 8.8 0.9 89.59.85 9.80 4.44 9 47.4 70.9. 9.5 5/4.885 0.8 44.9 9 48. 7.85.5 94.8 7/.8475.5 4.78 9 49.48 7.50 5.84 97.8 55/4.85975.58 48.9 9 50.9 75.0 7.9 99.9 7/8.8750. 50.49 9 5. 78.5 9.0 0.49 57/4.8905.74 50. 9 54.4 80.84 7.48 09.08 9/.905 4.9 5.04 9 55.55 8.49 74.9. 59/4.9875 5.49 5.7 9 57.9 84.4 77.0 4.9 5/.975.75 55. 9 58.40 8.7 78.8.7 /4.955 7.5 5. 9 59. 88.5 80.4 9.7 /.9875 8.77 0.7 9.5 90.9 8.5.5 /4.98475 40.9.5 9. 9.8 84.9..0000 4.00.9 9 5.05 9.4 87. 0. DRILL & REAMER BLANkS CHOICE OF TOLERANCE +.000 OR +.0000.000 TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page 5

DRILL & REAMER BLANkS METRIC HUTCHINSON HSS BLANkS METRIC BLANkS -.5mm - 4.70mm DIAMETER M HIGH SPEED STEEL - ROCKWELL C -4 M4 HIGH SPEED STEEL - ROCKWELL C -8 Length M M4 Diameter Overall Net Price Net Price mm mm Each Each.5 8. 4.7.40 8. 4.7.45 8. 4.7.50 8. 4.7.55 8.7.8.0 8.7.8.5 8.7.8.70 8..7.75 8..7.80 8.07.90.85 8.07.90.90 8.07.90.95 8.9..00 8.9..05 4.75.50.0 44.75.50.5 44.75.50.0 48.75.50.5 48.75.50.0 48.7.9.5 48.7.4.40 48.7.4.45 48.7.4.50 48.7.4.55 48.7.4.0 48.7.4.5 5.7.4.70 5.7.4.75 5.5.8.80 5.5.8.85 5.5.8.90 5.5.8.95 5.5.8.00 5.5..05 57.5.7 Length M M4 Diameter Overall Net Price Net Price mm mm Each Each.0 57.5.7.5 57.5.7.0 57.5.7.5 57.5.7.0 57.5.7.5 57.5.7.40 57.58.47.45 4.58.47.50 4.58.47.0 4.58.47.70 4.58.47.75 70.58.5.80 70.58.5.90 70.58.5.00 70..5.0 70..5.0 70...5 70...0 7...40 7...50 7...0 7...70 7...75 7.75.8.80 7.75.8.90 7.75.8 4.00 8.75.8 4.0 8.75.8 4.0 8.75.8 4.5 8.79.90 4.0 8.79.90 4.40 8.79.9 4.50 8.79.9 4.0 89.05.9 4.70 89.05.9 CHOICE OF TOLERANCE +.005 mm.0000 OR +.0000.005 mm METRIC BLANkS AVAILABLE.5mm - 5.0mm DIAMETER LENGTHS UP TO 900mm TO SUIT YOUR REQUIREMENTS Page TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97

METRIC HUTCHINSON HSS BLANkS METRIC BLANkS - 4.75mm -.0mm DIAMETER M HIGH SPEED STEEL - ROCKWELL C -4 M4 HIGH SPEED STEEL - ROCKWELL C -8 Length M M4 Diameter Overall Net Price Net Price mm mm Each Each Length M M4 Diameter Overall Net Price Net Price mm mm Each Each DRILL & REAMER BLANkS 4.75 89.05.9 4.80 89..47 4.90 9.4.95 5.00 9.4.95 5.0 9.4.95 5.0 95.4.9 5.5 95.8 4.5 5.0 95.8 4.5 5.40 95.8 4.5 5.50 95.8 4.5 5.0 98.8 4.5 5.70 98.8 4.5 5.75 98.8 4.5 5.80 98.9 4.79 5.90 98.9 4.79.00 0.9 4.79.0 0.9 4.79.0 0. 5..5 0. 5..0 0. 5..40 05.5 5.89.50 05.5 5.89.0 05.5 5.89.70 05.5 5.89.75 05.5 5.89.80 05.80..90 05.80. 7.00 08.80. 7.0 08.80. 7.0 08.80.7 7.5 08.80.7 7.0 08.80.7 7.40 4.0.80 7.50 4.0.80 7.70 4 4.45 7.57 7.75 4 4.45 7.57 7.80 4 4.45 7.57 7.90 4 4.45 7.57 8.00 4 4.45 7.57 8.0 7 4.9 8.8 8.0 7 4.9 8.8 8.5 7 4.9 8.8 8.0 7 4.9 8.8 8.40 4.9 8.8 8.50 5.40 9.0 8.0 5.40 9.0 8.70 5.8 9.7 8.75 4 5.8 9.8 8.80 4 5.8 9.8 8.90 4 5.8 9.8 9.00 4 5.8 9.8 9.0 4 5.8 9.8 9.0 7.7 0.75 9.5 7.7 0.75 9.0 7.7 0.75 9.40 7.8 0.7 9.50 7.8 0.7 9.0 0.8.7 9.70 0.8.7 9.75 0.84.74 9.80 0.84.74 9.90 0.84.74 0.00 0.84.74 0.50 7.5.9.00 40 8.9 4.8.50 4 9.57 5.90.00 49 0.08.78.50 5.5 8. CHOICE OF TOLERANCE +.005 mm.0000 OR +.0000.005 mm SPECIALLY EQUIPPED FOR SMALL LOT, HIGH PRECISION CENTERLESS GRINDING TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page 7

DRILL & REAMER BLANkS INCH HSS LENGTHS FRACTIONAL SIZE DRILL RODS TOLERANCE +.00 DECIMAL EQUIVALENT HARDENED GROUND HIGH SPEED BLANKS /.05 7.7 9.8 5/4.078 7.8 0.7 /.098 8.9 0.80 7/4.094 8.4.8.50 9.48.97 Wire Decimal Price 9/4.40 0.50 4. Size Equiv. Each 5/.5.4 4. /4.79.8 5.44.875.77 5. /4.0 5.0.9 7/.88.4.9 5/4.44 7.55 8.0.500 9. 9.8 7/4.5 0.85.4 9/.8.5.70 9/4.99 4.48 4.8 5/.5.5 4.0 /4.8 8.50 9. /.48 0.7 4. /4.594.4 4.8.750 4.89 44.9 5/4.90 7.5 50.94 /.40 9.78 5.5 7/4.49 4.45 54.09 7/.475 45.4 5. 9/4.45 47.94 57. 5/.488 50.0 59.0 /4.4844 5.97..5000 5.97.7 7/.5..78 HIGH SPEED STEEL DRILL BLANkS ANNEALED M HIGH SPEED BLANKS 9/.55 70.4 7.8.50 8.77 85.44 /.875 98.79 09.0 /.788 07. 5.8.7500.04 0.8 7/8.8750 55. 45.74.0000 00.4 75.4.50 5.0 70.0 HARDENED, GROUND HSS DRILL BLANkS HAVE A HARDNESS OF R/C -4 ALL BLANkS CAN BE CUT TO MEET YOUR REQUIREMENTS. PRECISION GRINDING AVAILABLE TO A.000 TOLERANCE INCH HARDENED & GROUND HSS LENGTHS WIRE SIZE TOLERANCE - +.000.090 0.90.080 0.90.070 0.90 4.00 0.90 5.050.8.00.8 7.00.8 8.00.8 9.09.8 70.080.8 7.00.9 7.050.9 7.040.9 74.05.5 75.00.5 7.000.5 77.080.9 78.00.9 79.045.47 80.05.47 METRIC SIZE +.0000 TOLERANCE -.0005 Metric Decimal Price Size Equiv. Each.50mm.099.5.0.0.9.70.07.8.80.05.8.90.054.8.00.094 0.90.0.04 0.90.0.047 0.04.0.05 0.04.40.055 0.04.50.059 9.8.0.00 9.8.70.09 9.8.80.0709 0.7.90.0748 0.7.00.0787 0.7.0.087 0.80.0.8 0.80.0.090 0.80.40.0945.8.50.0984.8 4 INCH HARDENED & GROUND HSS LENGTHS TOLERANCE.00 - + Diameter Decimal Price Inches Equivalent Each 7/.5 97.00 9/.55.75.50.50 /.875 40.75 /.788 48.50.7500 5.50.85 77.00 7/8.8750 8.00.0000 08.00 Page 8 TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97

HSS DRILL BLANk & DRILL SETS Conveniently packaged in all steel indexes, sets of general purpose jobber length drills and precision ground drill or reamer blanks are available for shipment from our plant. +.0000 +.000 Please specify when ordering: Drill set / Drill blank ( ) set / Reamer Blank ( ) set M HSS DRILL SET BLANK SET INDEX ONLY LETTER SET A - Z PIECES 95.5.59 9.45 WIRE SET # - #0 0 PIECES 8.90 0.89 7.45 WIRE SET # - #80 0 PIECES 9.00 49.4 4.95 FRACTIONAL SET / - x /4ths 9 PIECES 0.0.98 8.5 - - DRILL & REAMER BLANkS / CUTTING TOOLS FRACTIONAL SET / - x /nds 5 PIECES 59.0 74.5 7.0 METRIC BLANKS AVAILABLE AS +.0000 DRILL BLANKS( -.005 MM )OR +.005 REAMER BLANKS ( ) -.0000 MM OTHER SETS AVAILABLE TO SUIT YOUR NEEDS - CALL FOR PRICING AND DELIVERY METRIC SETS M HSS DRILL BLANK INDEX SET SET ONLY mm. - mm. x mm. PIECES 9.75 7.7.5 mm. - mm. x mm. 5 PIECES 99.0.4 8.5 mm. - 5.9 mm. x. mm. 50 PIECES 75.45 04. 9.5 mm. - 0 mm. x. mm. 4 PIECES 78.40 0.79.95 5 PIECES - COMPLETE IN ONE BOX M HSS INCLUDES: WIRE SET # - #0, DRILL BLANK INDEX LETTER SET A - Z, SET SET ONLY / - x /4ths 97.5 7.5 4.5 TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page 9

DRILL & REAMER BLANkS Size Decimal Price /.05. 5/4.078.80 /.097.5 7/4.094 4..50.9 9/4.40 5.49 5/.5 5.5 /4.79.7.875 5.94 /4.0 7.8 7/.87 8.7 5/4.44 9.50.500 8. 7/4.5 9.0 9/.8 0.7 9/4.99.7 5/.5 0.49 /4.8.79 /.47 4.00 /4.594 5..750 4.9 5/4.90 7.87 /.40 9.4 7/4.49 0.87 7/.475 0. 9/4.45 4.04 5/.487 5.77 /4.4844 7.5.5000 5.45 7/.5.5 9/.55.9 9/.597 9.59.50 9.8 /.5 47.8 /.875 47.55 /.787 57.45.7500 5.4.85 5.88 7/8.8750 7.4.0000 99.9 -/.05.99 -.50 5.54 -.500 45.09 -.750 75. -.5000 07. -.7500 8.99.0000 5.5 " LONG AIR HARDENING DRILL RODS AISI TYPE A Size Decimal Price mm.0787 5.95 mm.8 8.8 4mm.575 0.5 5mm.99.7 mm. 5.7 7mm.75 5. 8mm.50 8.89 9mm.54.9 0mm.97 8.9 mm.4 5.04 mm.474 40.48 mm.58 4.88 4mm.55 54. 5mm.590.88 mm.99 8.49 7mm.9 78.4 8mm.7087 88.0 9mm.7480 95.7 0mm.7874.78 mm.88 8. mm.8 9.88 mm.9055 9. 4mm.9449 5.8 5mm.984.88 DRILL ROD IS NOT HEAT TREATED DRILL ROD TOLERANCES Diameter Tolerance Below.4 ±.000.5-.500 ±.0005.500-.000 ±.00 AISI TYPE D Size Decimal Price.50.7.875 8.8.500 4.0 5/.5.47.750 4.5 7/.475.44.5000 79.4.50 0.0.7500 7.0 7/8.8750 5.9.0000 95.8.50 7.84.500 509.50.5000 7.40.7500 7.47.0000 904.88 TYPICAL ANALYSIS OF DRILL ROD MATERIALS C Si Mn W Cr V Mo S7.50.5.75.5.40 D.50.0.0.00.90.75 A.00.0.75 5.00.5.00 0.94.0.0.50.50 AISI TYPE S7 Size Decimal Price /.05 4.47 /.097.5.50 7.97 5/.5 0.5.875.79 7/.87 4..500 5.9 5/.5 8.8.750 5.74 7/.475 5.0.5000 7.08.50 5..7500 8. 7/8.8750 0.4.0000 40.5.500 9.58.750 5.7.5000..7500 40..0000 5.4 ALL DRILL ROD CAN BE CUT AND HEAT TREATED TO MEET YOUR REQUIREMENTS. PRECISION GRINDING OF DRILL ROD AVAILABLE TO A.000 TOLERANCE. ALSO AVAILABLE IN LIMITED SIZES: AISI TYPE W CALL FOR PRICING AND DELIVERY. TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97 Page 0

" LONG AISI 0- OIL HARDENING DRILL RODS NUMBER & LETTER SIZES Size Decimal Price Size Decimal Price Size Decimal Price Size Decimal Price 0.09 8. 7.0.5 4.80 4.00 K.8 4.94 59.040 8..0.0.8 4.05 L.90 5.4 58.04 8. 5.08.8.85 4. M.95 5.44 57.04 8. 4.0.45.88.48 N.0 5.7 5.045 8...5 0.9.57 O. 5.59 55.050 8..5.9 9.94.7 P. 5.78 54.055 8..0.9 8.97.84 Q.. 5.058 8. 0.7.4 7.99.87 R.9.4 5.0.59 9.4.9.0.9 S.48.7 5.0.7 8.9.9 5.04 4. T.58 7. 50.09.87 7.4.09 4.07 4.9 U.8 7.5 49.07.0.4.. 4.4 V.77 7.7 48.075. 5.48.78.9 4. W.8 8.0 47.077.8 4.5.4.7 4.4 X.97 8.58 4.079.48.5.5 A.4 4.7 Y.404 8.87 45.08..55.58 B.8 4.9 Z.4 9. 44.085.8.57.0 C.4 5.0 4.088.07 0.. D.4 5. 4.09.8 9.4. F.57 4. 4.095.84 8.8.48 G. 4.5 40.097.89 7.7.4 H. 4.4 9.099.00.75.75 I.7 4. 8.0. 5.78.90 J.77 4.80 MILLIMETER SIZES Size Decimal Price mm.0787.98 mm.8.45 4mm.575.77 5mm.99 4.7 mm..50 7mm.75 5.84 8mm.50 7.0 9mm.54 8.45 0mm.97 0.4 mm.4.7 mm.474 4. mm.58. 4mm.55 9.0 5mm.590.08 mm.99 4.8 7mm.9 7.8 8mm.7087. 9mm.7480.89 0mm.7874 7.5 mm.88 4.50 mm.8 45.5 mm.9055 48.4 4mm.9449 54.0 5mm.984 58.4 DRILL & REAMER BLANkS FRACTIONAL SIZES Size Decimal Price Size Decimal Price Size Decimal Price /.05 $.45 9/4.45.4 7/.848 4. 5/4.078.4 5/.488. 55/4.8594.4 /.097.74 /4.4844.7 7/8.8750 5. 7/4.094.4.5000 0.78 57/4.890 9.5.50. /4.55.58 9/.90 9.5 9/4.40.98 7/.5 4.0 59/4.99 4.9 5/.5.79 5/4.549 5.7 5/.975 4. /4.79. 9/.55 5.0 /4.95 44.8.875. 7/4.578 7.08 /.988 45.4 /4.0 4.05 9/.598 7.57 /4.9844 47.79 7/.88.84 9/4.094 8.74.0000 9.7 5/4.44 4.7.50. -/.05 5..500.5 4/4.40 0.9 -/.098 54.44 7/4.5 4.4 /.5. -.50 55.8 9/.8 4.59 4/4.79.7 -.875 4.5 9/4.99 5.49 /.875. -.500 4.77 5/.5 4.59 45/4.70 4.9-5/.5 74.79 /4.8.00 /.788 5.8 -.750 78. /.48.08 47/4.744 7.8-7/.475 89.7 /4.594 7.9.7500.44 -.5000 9.4.750.47 49/4.75 8.9-9/.55 99.5 5/4.90 8.8 5/.78 9. -.50.50 /.40 8.40 5/4.799. -.7500 5.9 7/4.49 9.4.85 0. -7/8.8750 5.4 7/.475 8.77 5/4.88.8.0000.8 DRILL ROD TOLERANCES Diameter Tolerance Below.4 ±.000.5-.500 ±.0005.500-.000 ±.00 DRILL ROD IS NOT HEAT TREATED ALL DRILL ROD CAN BE CUT AND HEAT TREATED TO MEET YOUR REQUIREMENTS. PRECISION GRINDING OF DRILL ROD AVAILABLE TO A.000 TOLERANCE. ALSO AVAILABLE IN LIMITED SIZES: AISI TYPE W CALL FOR PRICING AND DELIVERY. TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page

DRILL & REAMER BLANkS HUTCHINSON SUPER HIGH ALLOY BLANkS ASP0 (8.5% COBALT) T5PM (% TUNGSTEN) ASP0 (0.5% COBALT) M4PM (5.75 TUNGSTEN) ASP (AISI M:) CPM0V (AISI A)(9.75% VANADIUM) ASP0 T5PM M4PM ASP0 ASP CPM0V Length Diameter Decimal Overall Net Price Net Price Net Price Net Price Net Price Net Price Inches Equivalent Inches Each Each Each Each Each Each ASP0 is an 8.5% cobalt content high-alloy high-speed steel man u factured powdermetallur gically. This high per form ance ma terial exhibits good grindability, tough ness, hot hardness and wear resistance. T5PM is a tungsten type high speed steel containing high carbon and vanadium for very high hardness and maximum wear resistance, and cobalt for good red hardness. Manu fac - tured powdermetallur gi cally for improved quality and grindability. /.05 4.99 4.0 4. /.0975 4.7 4.5 4.07.50.4.0.0 4.9 4 4.7 4.7 4.09 7.4.80.0 5.89.0.875.8.55.87.75 4.99 4 5.8 5.0 8.9 4.9 7.04 9. 8.0 8.97 7.87.4.500 5.0 7. 4.4.5 4.5.5 4 7.47 0.9.48 7.08. 0.00.50.79 9.97. 9.7 5.05 5/.5 4 9. 4.0 8..8 8..7.57 9.78.7 0.7.45 0.05.750 4.8.89 0.04. 9.8.8 7.74 5.5 5.05 9.50 4.7 4.40 7/.475.9.77 9.58 9.74.5000 4 8.55.0 5. 40.88 5. 4.8 5.89 7.8.90 57.0.8.0.50 4.57 4.49.59 9.9 5.98 9. 4.49 0.40 5.8 9.7 5.04 58.84.7500 4 4.89 59.44 5. 9.4 4.54 5.4 57.58 8.00 48.70.98 47.5 79.85 7/8.8750 74.7 0.0.7 04.77.0000 9.4.4 78. 07.8 4.58 M4PM is designed for high wear resis tance. Its high vana dium and carbon content pro vide high resistance to wear in cold work and cutting appli cations. It exhibits improved performance working with abra sive materials. Manu factured powder-metallur gically for improved grind a bility and toughness. ASP An all around steel suitable for cutting tools such as reamers, taps, milling cutters, broaches, etc... Used where cutting conditions demand high wear resistance and superior toughness but where demands for hot hardness are not paramount. ASP is also suitable for cold work applications where tools for punching show an admirable combination of wear resistance and toughness. ASP0 is an extremely high alloy high speed steel. The steel is atomized, compacted and processed to required dimensions. The result is an extremely homogeneous steel. ASP 0 s homogeneous structure enhances such properties as dimensional stability and shape during heat treatment, as well as improving grindability and toughness. ASP-0 s method of manufacture and composition mean that it can provide high hot hardness and good wear resistance. CPM0V(AISI A) is a unique tool steel made by a particle metallurgy process. Its high carbon and high vanadium content provides a combination of exceptionally good wear resistance, toughness and strength for both cold and warm work applications. CHOICE OF TOLERANCE OR +.000 +.0000 -.0000 -.000 AVAILABLE IN ANY DIAMETER.000 -.000 ADDITIONAL LENGTHS AVAILABLE TO SUIT YOUR REQUIREMENTS TYPICAL ANALYSIS OF SUPER HIGH ALLOY MATERIALS: C Cr Mo W V Co Hardness ASP0.8 4. 5.0.4. 8.5 R/C 5-7 T5PM.55 4.0.0 5.0 5.0 R/C 4- M4PM.5 4.0 4.5 5.75 4.0 R/C -5 ASP0.0 4.0 7.0.5.5 0.5 R/C 7-9 ASP.8 4. 5.0.4. R/C -5 CPM0V.45 5.5. 9.75 R/C -4 Page TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97

WkE 45 SUPER COBALT HSS BLANkS WkE 45 WITH % COBALT CONTENT, FINE GRAIN STRUCTURE AND UNIQUE CHEMICAL COMPOSITION, MEETS REQUIREMENTS FOR MAXIMUM PERFORMANCE IN MOST CUTTING DRILL & REAMER BLANkS METRIC Dia. mm Length Overall Net Price mm Each 00 4.09 4 80.54 4 00 4.74 5 00 5.8 5 0 8.7 8.47 80 0.7 00 7.0 0.09 8 00 0.4 8 0 8.4 8 00 4. 0 00 5.78 0 0 7.87 0 00 85.8 00 9.7 0 5.8 00 59.75 4 0 59.8 5 00 44.7 00 45.7 0 7. 00 87.40 8 00 55.78 8 00 0.5 0 00 5. FRACTIONAL Dia. Inches Length Overall Net Price Inches Each 4 9.98 8.08 4. 9.55 4 5.59.94 5/ 4.04 5/ 9/.4 4.5.00 8 4. 4 7.78 5.4 8 8.94 4 4.75 79. 00.9 8 59. WkE45 TYPICAL ANALYSIS C Cr Mo W V Co.40 4..5 9.0.5.0 HARDNESS: R/C 7-9 STANDARD DIAMETER TOLERANCE +.0.00 SPECIAL DIAMETERS AND TOLERANCES AVAILABLE PRICES UPON REQUEST WKE45 SQUARE & RECTANGULAR TOOLBITS AVAILABLE SEE PAGE 4 AVAILABLE UNTIL STOCk IS EXHAUSTED TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page

ENGRAVING BLANkS ENGRAVING BLANkS SPLIT HALF-ROUND Solid Tungsten Carbide SINGLE END DOUBLE END Solid Tungsten Carbide Blanks with a close sub-micron grain structure, hardness of RA9.8 and high transverse rupture strength offer superior results when machining LENGTH OF SINGLE END DOUBLE END DIAMETER O.A.L. SPLIT/FLAT PRICE EA. PRICE EACH 5/ 5/ 5/ 5/ 7/ 7/ 7/ 7/ - 4-4 - 4-4 - 4-4 4 5.47.7 8.5.4 9.08 8.55 9.4.8 7.7 4.44.5.9..74. 7.7.97 4.78 48.8. 0.84 4.45 0.89 4.4 0.84 4.45 0.89 44.9 59.04 98.4 8.8 9.44 0.85 7.84..4. 5.58 0.49 9.54 5.79 7.40 9.77.7 8.40.49.98 7.7 54. 9..80 4.7 7.40.79.80 4.7 7.40 5.. 07. Tolerances: Diameter +.0 Split/Flats +.00 above centerline.0005.0 END SHAPES AVAILABLE ON REQUEST - PC. MINIMUM PER ITEM INFORMATION AND PRICING AVAILABLE ON REQUEST ALSO AVAILABLE IN BOXED SETS TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97 Page 4

CARBIDE DRILL BLANkS CENTERLESS GROUND - CUT TO LENGTH Dia. Decimal LENGTH 4 5 /.05.48. 8.77.07 /.0975.4.00.9.9 0.0.9.50..9.5.49 4.5 0.8 8. 5/.55 5..99.75 4.5.9.57.7.875.8.44 4. 5.7.99 9. 0.8.500 5.90.87 8.5 0.5..4.4 47.79 5/.5 9.7.9. 7. 9.9 4.90 74.7.750 7.49.7..4 0.09. 8. 99.7 7/.475 7.0.5 7.0 8.04 4.9 7.00.5000.40. 5.55 9.8 5.74 40.55 55.45 58.8 9/.55 44.4 4.87 7.9 0.0.50 40. 4.78 57.7 7.5 88. 48..7500 7.7 77.75 7.45 9..5 85.89 7/8.8750 89.7 09.75 78.9 89..0000.9 5.95 0.74.9.500 5. DRILL & REAMER BLANkS METRIC SIZES Dia. Length Price mm 9mm.47 4 5 4.0 5 5 4. 5 5.5 4 7.8 8 4.8 0 70 8.0 0 00 8.0 7 5.7 4 84 8.49 89 5.47 8 00 87.47 0 00 00.57 5 00.09 C Micrograin Carbide 0% Cobalt Content Hardness R/A 9.8 TRS (nominal) 40 KPSI Density 4.50 Gm/CC Diameter Tolerance +.0 -.0005 STYLE STB 000 & 000 BLANKS AVAILABLE - SEE PAGES 44 & 45 Additional grades and tolerances available on application Available in any diameter 4"-" lengths up to 0" TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page 5

DRILL & REAMER BLANkS HARDENED & GROUND TOOL STEEL BLANkS SIX INCH LENGTHS HEAT TREATED & GROUND TO A DIAMETER TOLERANCE OF +.0000 -.000 SEE PAGE 0 FOR TYPICAL CHEMICAL MATERIAL ANALYSIS OF THESE AISI O AISI A AISI S7 AISI D MATERIALS R/C 0- R/C 58-0 R/C 58-0 R/C 0- DECIMAL Net Price Net Price Net Price Net Price DIAMETER EQUIV. Each Each Each Each /.05 $5.7 $5.49 $5.8 $0.05 5/4.0785 5.57 5.44 5.59 9.0 /.0975 5.7 5.58 5.88 8.5 7/4.0975 5. 5.07 5.4 7.80.50 5.8 5.8 5.9 0.08 5/.55 5.5 5..0 8.04.875 5.8 5.40.7.09 7/.875 5.74.9 7.07 9.05.500.0.4 9.7.00 9/.85.7 7.9 8.4.5 5/.5.8 7.8 0.95 5.8 /.475 7.89 9.0 0.4 4.80.750 8.07 9.7.0 8.48 7/.475 0.89.97.77 5.9.5000.8 4.80.8 4.5 9/.55 5.8 9.79.50 8.89.9 5. 7.94.7500 4.78 0.44 4. 5. 7/8.8750.0 4.8 4.8 7.7.0000 4.4 50.90 57.79 88.84 AVAILABLE IN SPECIAL LENGTHS, DIAMETERS, HARDNESS & TOLERANCES TO MEET YOUR REQUIREMENTS CALL FOR PRICING & DELIVERY Page TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97

HARDENED & GROUND TOOL STEEL BLANkS SEE PAGE 0 FOR TYPICAL CHEMICAL ANALYSIS OF THESE MATERIALS TWELVE INCH LENGTHS HEAT TREATED & GROUND TO A DIAMETER TOLERANCE OF +.0000 -.000 MATERIAL AISI O AISI A AISI S7 AISI D R/C 0- R/C 58-0 R/C 58-0 R/C 0- DECIMAL Net Price Net Price Net Price Net Price DIAMETER EQUIV. Each Each Each Each /.05 $4.5 $4.9 $5.55 $4.79 5/4.0785 4. 4.07 5.55.88 /.0975 9.45 9.7.55 9.8 7/4.0975 0. 0.05.08 8.9.50 0.59 0.84..57 5/.55 0.9.4 4.59 9.48.875 0..94 5. 4.0 7/.875 0..99 5.7 0..500 0.9.7.8 9.0 9/.85.4 4.7 7.90 5. 5/.5.5 5.75 5.. /.475 5.0.5.47.8.750 4.84 8. 0.40 4. 7/.475.45.90 7. 57.7.5000.8 0.49.58 5.7 9/.55 9.9 40..50 7.07 45.4 55.94 85..7500 4.59 59. 7.44.5 7/8.8750.05 8.05 99.57 58.08.0000 7.97 9.5 0.47 97.4 DRILL & REAMER BLANkS AVAILABLE IN SPECIAL LENGTHS, DIAMETERS, HARDNESS & TOLERANCES TO MEET YOUR REQUIREMENTS CALL FOR PRICING & DELIVERY TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page 7

DRILL & REAMER BLANkS HARDENED & GROUND 440C STAINLESS STEEL BLANkS SIX & TWELVE INCH LENGTHS HEAT TREATED TO R/C 58-0 & GROUND TO A DIAMETER TOLERANCE OF +.0000 -.000 LONG LONG DECIMAL Net Price Net Price DIAMETER EQUIV. Each Each /.05 $8.50 $5.8 5/4.0785.50 4.00 /.0975 4.50 0.00 7/4.0975.50.00.50 5.5.00 5/.55.50 4.00.875 7.5 5.00 7/.875.5 7.00.500.00 45.00 9/.85 8.00 7.00 5/.5 0.00 4.00 /.475 7.00.00.750.00 45.00 7/.475 4.5 49.00.5000 7.50 5.00 9/.55.5 74.5.50 9.00 78.00.7500 45.00 87.50 7/8.8750 5.50 0.00.0000.50 5.00 HEAT TREATED 440C IS ONE OF THE HARDEST STAINLESS STEELS. IT IS MAGNETIC AND HAS GOOD WEAR RESISTANCE DUE TO HIGH CARBON CONTENT AVAILABLE IN SPECIAL LENGTHS, DIAMETERS, HARDNESS & TOLERANCES TO MEET YOUR REQUIREMENTS CALL FOR PRICING & DELIVERY TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97 Page 8

FRACTIONAL HSS DRILLS Fractional Decimal General Heavy Fast Slow Half Cobalt Size Equivalent Purpose Duty Spiral Spiral Round 8 Point 5 Split Point 5 Split Point 8 Point 8 Point 8 Point /4 / /4 / 5/4 / 7/4 9/4 5/ /4 /4 7/ 5/4 7/4 9/ 9/4 5/ /4 / /4 5/4 / 7/4 7/ 9/4 5/ /4.055.05.04875.05.0785.0975.0975.50.405.55.7875.875.05.875.475.500.55.85.9875.5.85.475.5975.750.905.405.4875.475.455.4875.48475.5000....9.9.8.4....48.5.8.0.8.0.79.88.4.9 4. 4.55 5.4 5..0.5.84 7.4 8.0 8.4 8.9 8.8.8.8.8.4.4.0..75.97.5.9..75..40.95 4.5 4.8 5.9.. 7.4 7. 8.4 8.47 9.47 0.04 0.5 0.5.77.09..0.0.0.4.59..9.09.44 4.5 4.55 4.84 5. 5.84. 7.49 7.98 8.79 9.4. 0.99..4 4.55 4.85 7.9 8.4 8.8 8.5.7.9.87.85.87.87.88.8.88.9...0.9.7.54 4.79 4.78 5.54 5.7.0 7.00 8.74 8.44 0.5 9.85.78.5.8.0 4.8.79..7.58.4.4.4.4.8.8.85.0.5.78 4.4 4.85 4.85 5.84.4 7.7 7.90 8.4 9..7.7..8 4.48 4.88.9 8.5 9.0 9.0 7.5 5.57 8.4 8.8 8.8 8.8 9.0 9.8 9.9 0.08 0.5.4.4.5 4.5 9.9.47 5.07 7. 0.8.7.5 9. 4. 45.58 49.0 5.4 55.89 59.. 7.05 70.75 CUTTING TOOLS NOT SPLIT POINT ALSO AVAILABLE : LETTER SIZES DECIMAL SIZES PARABOLIC FLUTE METRIC SIZES STRAIGHT FLUTE TAPER LENGTHS CARBIDE TIPPED TYPE M TAPER SHANkS AUTOMOTIVE SUPERFLUTE BRITE OR BLACk FINISH TYPE A TYPE B TYPE C CALL FOR PRICING AND DELIVERY NO MINIMUM ORDER NO PACkAGE QUANTITY TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page 9

CUTTING TOOLS General Purpose WIRE SIZE HSS DRILLS Slow Spiral Fast Spiral Half Round Wire Decimal General Heavy Fast Slow Half Cobalt Size Equivalent Purpose Duty Spiral Spiral Round 8 Point 5 Split Point 5 Split Point 8 Point 8 Point 8 Point 4 5 7 8 9 0 4 5 7 8 9 0 4 5 7 8 9 0 4 5 7 8 9 40.80.0.0.090.055.040.00.990.90.95.90.890.850.80.800.770.70.95.0.0.590.570.540.50.495.470.440.405.0.85.00.0.0.0.00.05.040.05.0995.0980.45.47..4.4.4.94.99.98.95.8.84.80.80.80.80.80.49.48.47..8.8.8.0...4.4.4.4.4.4.4.......4.9.8.89.89.89.5.55.55.5.5.7.0.0.0.0.0.9.89.89.74.75.7.7.7.9.7.54.5.5.5.5.5.5.5.50.5.5.5.5 5.54 5.54 5.7 5.0 5.0 5.0 4.0 4.0 4.0 4.0 4.0 4.0.87.88.88.0.54........8.8.8..5.8.7...4..0.0.0.0.0.8.77.54.54.54.54.90.98.90.90.75.9.74.74.5.5.74..0.0.0.8.0.9.9.9.9.88.78.79.8.8.88.88.8.88.8.8.8.79 4.99 4.99 4.80 4.80 4.80 4.80 4.4 4.4 4.4 4.4.87.87......0.0.0.09.09.09.09.98.98.98.98.4.4.4.4.4.4.4.4.4.4.4.4.5.5.4.4.4.4.4.4.4.4.4.4 0.5 0.5 0.5 0.5 0.5 0.08 0.08 0.08 0.08 0.08 9.9 9.9 9.9 9.9 9.9 9.8 9.8 9.8 9.0 9.0 9.0 9.0 9.0 8.8 8.8 8.8 8.8 8.8 Page 0 TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97

Typical Uses: General Purpose: Heavy Duty: Cobalt: Fast Spiral: Slow Spiral: Half Round: WIRE SIZE HSS DRILLS Cast Iron, Steel, Steel Forgings, Short Runs Stainless Steel, Tough Alloy Steel Titanium, Asbestos, Graphite, High Temperature Alloys, Glass Filled Epoxies, Clay Aluminum, Magnesium, Copper, Bronze, Soft Steel, Slate, Wood, Die Casting Brass, Soft Materials Brass, Copper, Hard Rubber, Soft Woods, Molded Plastics CUTTING TOOLS Wire Decimal General Heavy Cobalt Fast Slow Half Size Equivalent Purpose Duty 5 Split Point Spiral Spiral Round 8 Point 5 Split Point 8 Point 8 Point 8 Point 4 4 4 44 45 4 47 48 49 50 5 5 5 54 55 5 57 58 59 0 4 5 7 8 9 70 7 7 7 74 75 7 77 78 79 80.090.095.0890.080.080.080.0785.070.070.0700.070.05.0595.0550.050.045.040.040.040.0400.090.080.070.00.050.00.00.00.09.080.00.050.040.05.00.000.080.00.045.05.............................5.5.8.8.8.8.8.8.8.8...50.5.50.50.5.5.5.5.5.5.5.5 Prices on Application.0.00.00.00.00.00.00.00.00.00.00.00....54.54.55.54.54.9.9.9.9.9..09.09.50.50.5.5.5.5.88.8.88.8.88.90.9.9.8.87.87.87.9.87.9.87.87.87.87.87.8.87.9.9.9.9.0.0.0.0.08.0.08.08...05.87.8.87.87.8.87.87.7.7.4.4.4.4.4.47.47.47.47.47.47.7.74.57.57.57.57.57.57.57.57 4. 4..4.4.4.4.4.5.5.........94.94 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.4 8.4 8.4 8.4 8.4 5.45 5.45 5.45 5.57 5.57 5.57 5.57 5.57 5.57 5.57 5.57 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 #5 - #80 NOT SPLIT POINT Also available: Extension Drills - Page Combination Drill & Countersinks - Page 4 TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page

CUTTING TOOLS EXTENSION DRILLS & LONGBOYS Size Decimal Aircraft Aircraft 8 8 Equivalent Extension Extension Extended Longboy Longboy Longboy 5 Split Point 5 Split Point 5 Split Point 8 Point 8 Point 8 Point /.05 4.08.79.7 0.47 5/4.0785 4.08.79.7 7.8 /.0975..79.4.88.89 7/4.0975. 0.05.5 0.87 5..50. 0.05.5 0. 8.5 40.4 9/4.405. 0.05.45 9.9 9.8 5.9 5/.55. 0.05.. 9.8 40.4 /4.7875 4.0..7.40 0.5 5.9.875 4.0..9.47 0.5 4.99 /4.05 4.88.79.0.4 4.4.74 7/.875 4.88.79.9.48 4.4.74 5/4.475 5..75.48.8 4.4.74.500 5..75.78.80 4.4 4.0 7/4.55.84.5 4..87 4.4 5.5 9/.85.9 7.8 4.4.44 4.4 5.5 9/4.9875 4.44 9.59 4.80.54 4.85 5.5 5/.5 5.7.0 5..78 4.85 44.9 /4.85 7.0.05 5.55 7.79 5.90 7.5 /.475.8.75.0 4.55 5.90 7.5 /4.5975 8.90 5.58..4.57 7.5.750 9.5 7.05.40 4.80.57 47.0 5/4.905.48 8.5.79 8.7 9.85 40.5 /.405 0.7 8.5 7..79 9.85 40.5 7/4.4875.05 0.5 7.55.58.0 4.74 7/.475..08 8.0 7.7.0 55.0 9/4.455 5.5.98 8.49 0. 4.74 49.97 5/.4875.5.49 8.95 9.87 4.74 49.97 /4.48475 7.49.49 9. 7.5 5.4 5.07.5000 7.97 8.5 9. 9.94 5.4.9 Aircraft extension drills are one-piece extra-long shafts with the same flute length as jobber length drills. extended drills are an economical alternative to aircraft extensions with HSS shafts welded to jobber length drills. Longboy drills are fluted over a much longer length for certain deep hole drilling applications. Additional lengths up to 4 available - Call for price and delivery Page TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97

DOUBLE END END MILLS Shank, Double End Cobalt CUTTING TOOLS Diameter of Cutter Length of Cut Stub ( Long) Length Standard (- Long) Flute Flute Ball 4 Flute of Cut Flute Flute Ball 4 Flute / /4.0 4.50 7.0 / 8.70 5.0 8.0 /4 /.0 4.50 7.0 9/4 8.70 5.0 8.0 / / 5.0.0.00.50.40.90 5/4 5.0.0.00 5/4.50.40 0.9 / 9/4 5.0.0.00 9/.50.40.90 7/4 5/ 5.0.0.00 /4.50.40 0.9 5.0.0.00.50.40.90 9/4 7/ 7.50 4.80 7.0 / 7.0 4.50 0.70 5/ 5/4 7.50 4.80 7.0 7/ 7.0 4.50 7.90 /4 7.50 4.80 7.0 7.0 4.50.5 9/ 7.50 4.80 7.0 7.0 4.50 7.90 Double End Carbide End Mills, Stub Length Diameter Shank Length Length -FLUTE 4-FLUTE of Cut Diameter of Cut Overal / / - 7.0 7.89 /4 / - 7.0 7.89 / -.0 7.0 5/4 -.0 7.0 / -.0 7.0 7/4 -.0 7.0 -.0 7.0 9/4 5/.99.0 5/ 5/.99.0 /4.99.0.99.0 7/ - 7.7 8.0-7.7 8.0 5/ 5/ - 7.7 9.57 5/ - 40.8 4.8 ALSO AVAILABLE: 4 Flute Ball Flute Decimal Sizes.00 -.87 Metric Sizes Flute Single End 4 Flute Single End Single End Carbide Ball End Carbide TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page

CUTTING TOOLS COMBINATION DRILL & COUNTERSINkS PLAIN TYPE COUNTERSINkS Countersink Diameter Diameter Length Length 0 R.H. 8 Angle 90 Angle Size of of of Overall Price R.H. R.H Number Body Drill Drill Inches Each Price Each Price Each 00000.00.00 4 8.80.98 0000.05.05 4 8.08.98 000.00.00 4 7..70 00.05.05 4 7..70.70 0 / / 4 7..70.70 /4 /4 4 5.8 9.7 9.7 5/4 5/4 7 8 5.4 9.9 9.9 7/4 7/4 5.4 0. 0. 4 5/ 8 5.8 0.70 0.70 4 9/4 9/4 8.97 4.7 4.7 5 7/ 4 9.9.. 7/ 7/.87 4.7 4.7 7 4 0.0 4.9 4.9 8 5/ 5/ 7.85 49.04 49.04 9 0 7/8 / / 5 8 4 5.0 8. BELL TYPE COUNTERSINkS Countersink Diameter Diameter Length Diameter Length HSS RH M4 RH T5 RH Size of of of of Bell Overall Price Price Price Number Body Drill Drill Inches Inches Each Each Each /4 /4.00 4..0.5 / /.50 7 8.45.47.0 / /.00.54.9. 4 5/ 7/4 7/4.50 8.75 7.48. 5 7/ 5/ 5/.50 4 0.8 7.88.5.400 5.8 4.0 55. 7 7/ 7/.500 4.49 4.4 8.5 8.00.47 89.50 9.00 LONGBOY COUNTERSINkS (HSS 0 Angle) FOR LONG REACH APPLICATIONS -, 4, 5 & " OVERALL Countersink Diameter Diameter Length 4 5 Size of of of Price Price Price Price Number Body Drill Drill Each Each Each Each /4 /4.59 4.8 9.7 5.79 5/4 5/4 5.54 9.89 5.90 7/4 7/4.5.54.4 4 5/ 8.4..77 4 9/4 9/4 0.9 4.0 9.04 5 7/.8 7.59 0.98 7/ 7/ 9.4 5.8 7.0 8 5/ 5/ 7.4 TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97 Page 4

SINGLE FLUTE COUNTERSINkS SINGLE & SIX FLUTE COUNTERSINkS Tool C/L Angles Body Shank Shank O/A HSS No. Available Dia. Dia. Length Length Price -SF -.8 -SF - 7. -SF - 7. 5/-SF 5/ 7/8 4 8.9 -SF 7/8 4 0.7 -SF 0 8 8. -SF 4 8 8 8.94 -SF 45 5 5.7 -SF 50 5 8.9 AND 4-SF 0 4 5 8 8.44 -SF 5 8 85.7 4-SF 4 8 4 4.0 CUTTING TOOLS -SF 8 4 8 47.00 -SF 8 4 4 48.87 -SF 8 5 7.9 SIX FLUTE COUNTERSINkS DESIGN - Hutchinson Countersinks are designed to take heavy cuts and produce exceptionally smooth seats. SHEAR-CUT TEETH - Cutting teeth are arranged to give a shearing cut, eliminating chatter possibility. TRUNCATED END-DIMENSIONS- Diameter at small end of 0 countersinks is approximately one third of the body diameter; of 4 and 45 countersinks it is about one-fifth, and of 0 countersinks it is about one-sixth. HIGH SPEED STEEL Tool C/L Angles Body Shank Shank O/A Price No. Available Dia. Dia. Length Length Each CK- - 7.54 CK- - 8.0 CK- 8.4 CK-5/ 0 4 5/ 7/8 4 9.99 CK- 7/8 4.4 CK- 45 8 8 4.0 50 CK- AND 8 8 0.9 CK- 5.9 0 CK-7/8 7/8 5 5. CK- 5 4.49 CARBIDE Tool C/L Angles Body Shank Shank O/A Price No. Available Dia. Dia. Length Length Each CK--W - 9.8 CK--W -.4 CK--W - 5.77 CK-5/-W 0 4 5/ 5 8. CK--W 5 8 0.5 45 CK--W 5 8 4.47 50 CK--W CK--W AND 0 7 8 7 8 58.7 7.44 CK-7/8-W 7/8 7 8 05.00 CK--W 0.99 DOUBLE END Six Flute Countersinks HIGH SPEED STEEL Tool C/L Angles O/A Price No. Available Diameter Length Each CK--DE.8 CK--DE 0 4.0 4 CK--DE 45 4. CK--DE 50 4. CK--DE 0 5.9 CK--DE 5.7 CARBIDE Tool C/L Angles O/A Price No. Available Diameter Length Each CK--W-DE 7. CK--W-DE 0 5.7 4 CK--W-DE 45 4.59 CK--W-DE 50 55.97 CK--W-DE 0 77.5 CK--W-DE 07.44 TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page 5

CUTTING TOOLS ROTARY FILE SETS COUNTERSINk SETS SET #E 99.4 Carbide Head Shank SET #4E 9.97 Carbide flutes Carbide 8 flutes All rotary file sets furnished in convenient cases. Individual rotary files also available. SIX FLUTE CHATTERLESS COUNTERSINk SETS Set #7 - Chatterless Countersink Set containing,, and inch diameter cutters. Specify Center Line Angle desired. High Speed Steel $0.4 Set #7W - Chatterless Countersink Set containing a,,, and inch Carbide Countersink. Specify Center Line Angle desired. Carbide $0.0 SET #8E 00.50 Solid Carbide Shank Set #9 - Chatterless Countersink Set containing,,,, and inch diameter cutters. Specify Center Line Angle desired. High Speed Steel $.0 C/L ANGLES AVAILABLE: 0, 4, 45, 50 and 0 SINGLE FLUTE COUNTERSINk SETS Set #5 - Contains a,,, and /4 inch diameter HSS Single Flute Countersink. Specify Center Line Angle desired. High Speed Steel $58.0 Set #W - Contains a,,, and inch diameter Carbide Single Flute Countersink. Specify Center Line Angle desired. Carbide $7.9 Set #7 - Contains a,,,,,,!/4,!/,, #/4 and inch HSS Single Flute Countersink. Specify Center Line Angle desired High Speed Steel $55.8 FOR INDIVIDUAL COUNTERSINKS, SEE PAGE 5 Page TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97

SERIES 700 - Straight Flute SERIES 700C - Straight Flute Cobalt HSS CHUCkING REAMERS CUTTING TOOLS SERIES 740 - Right Hand Spiral Flute High Speed Steel - Straight Shank - Right Hand Cut Fractional - Wire Gage - Letter - Over & Under - Dowel Pin - Metric Price Size Decimal 700 740 700C /.0.. 5.9 7.00 4.0 09.78 5.9.00 4.0 09.78 5.9 5.050 4.0 09.78 5.9 4.00 4.0 09.78 5.9.070 4.0 09.78 5.9.080 4.0 09.78 5.9.090 4.0 08.0 5.9 mm.094 4.0. 0.0400 4.0. 5.7 59.040 4.0. 5.7 58.040 4.0. 5.7 57.040 4.0. 5.7 5.045 4.0. 5.7 /4.049 4.0. 5.7 55.050 4.0. 5.7 54.0550 4.0. 5.7.5mm.059 4.0. 5.0595 4.0. 5.7 /.05 4.0. 5.7 5.05 4.0. 5.7 5.070.5.08. 50.0700.5.08. 49.070.5.08. 48.070.5.08. 5/4.078.5.08. 47.0785.5.08. mm.0787.5.08 4.080.5.08. 45.080.5.08. 44.080.5.08. 4.0890.5.08. 4.095.5.08. /.097 0.5.9. 4.090.48.8.7 40.0980.48.8.7.5mm.0984.48.8 Price Size Decimal 700 740 700C 9.0995.48.8.7 8.05.48.8.7 7.040.48.8.7.05.48.8.7 7/4.094.84.5.4 5.00.84.5.4 4.0.84.5.4.0.84.5.4.0.84.5.4 mm.8.84.5.00.84.5.4.40.40.84.5.4.50 9.44.4 0.5.0.0.84.5.4 0.85.84.5.4 9.0 4.0. 5..5mm.78 4.0. 8.405 4.0. 5. 9/4.40 4.0. 5. 7.440 4.0. 5..470 4.0. 5. 5.495 4.0. 5. 4.50 4.0. 5..540 4.0. 5. 5/.5 4.0. 5..570 4.0. 5. 4mm.575 4.0..590 5.09 7.. 0.0 5.09 7.. 9.0 5.09 7.. 8.95 5.09 7.. /4.79 5.09 7.. 7.70 5.09 7...770 5.09 7.. 4.5mm.77 5.09 7.. 5.800 5.09 7.. 4.80 5.09 7.. TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page 7

CUTTING TOOLS SERIES 700 - Straight Flute SERIES 700C - Straight Flute Cobalt HSS CHUCkING REAMERS SERIES 740 - Right Hand Spiral Flute High Speed Steel - Straight Shank - Right Hand Cut Fractional - Wire Gage - Letter - Over & Under - Dowel Pin - Metric Price Size Decimal 700 740 700C.850 5.09 7..77.85.85 5.09 7..77.875.5.4 5..885.885 5.09 7..79.890 5.09 7..79.90.89 9.4 9.50 0.95.89 9.4 9.50 9.90.89 9.4 9.50 5mm.98.89 9.4 9.50 8.990.89 9.4 9.50 7.00.89 9.4 9.50 /4.0.89 9.4 9.50.040.89 9.4 9.50 5.055.89 9.4 9.50 4.090.89 9.4 9.50.0.89 9.4 9.50 5.5mm.5.89 9.4 7/.87.89 9.4 9.50.0 7.9 9.77 9.8.80 7.4 9.95 9.8 A.40 7.4 9.95 9.8 5/4.44 7.4 9.95 9.8 mm. 8.8 0.0 0. B.80 8.8 0.0 0. C.40 8.8 0.0 0. D.40 8.8 0.0 8..490.490.4.45 8..500 5.54 7..97.50.50.7.45 8..5mm.559 8.8 0.0 F.570 8.8 0.0 0. G.0 8.8 0.0 0. 7/4.5 0.7.4 7. H.0 0.7.4 7. I.70 0.7.4 7. 7mm.75 0.7.4 J.770 0.7.4 7. Price Size Decimal 700 740 700C K.80 0.7.4 7. 9/.8 9..0 5.9 L.900 0.7.4 7. M.950 0.7.4 7. 7.5mm.95 0.7.4 7. 9/4.99 0.7.4 7. N.00 0.7.4 7..5.5 9..9 5.9 5/.5 8. 0.9 4.58.5.5 9..9 5.9 8mm.50 0.7.4 O.0 0.7.4 7. P.0.8.99 9.44 /4.8.8.99 9.44 Q.0.8.99 9.44 8.5mm.4.8.99 R.90.8.99 9.44 /.47.8.99 9.44 S.480.00 4.0 9.95 9mm.54.00 4.0 T.580.00 4.0 9.95 /4.594.00 4.0 9.95 U.80.00 4.0 9.95.740.740 0.89.97 8.4 9.5mm.740 0.89.97.750 9.80.78.9.70.70 0.89.97 8.4 V.770.9.4.47 W.80.9.4.47 5/4.90.9.4.47 0mm.97.9.4 X.970.9.4.47 Y.4040 4.8 7..47 /.40 4.8 7..47 Z.40 4.8 7..47 0.5mm.44 4.8 7. 7/4.49 4.8 7..47 TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97 Page 8

SERIES 700 - Straight Flute SERIES 700C - Straight Flute Cobalt HSS CHUCkING REAMERS CUTTING TOOLS SERIES 740 - Right Hand Spiral Flute High Speed Steel - Straight Shank - Right Hand Cut Fractional - Wire Gage - Letter - Over & Under - Dowel Pin - Metric Price Size Decimal 700 740 700C mm.4 4.8 7..45.45.59 7..47 7/.475.59 5.9 4.8.485.485.59 7..47.5mm.458 7.04 9.74 9/4.45 7.04 9.74 4.8 5/.487 7.04 9.74 4.8 mm.474 7.04 9.74 /4.4844 7.04 9.74 4.8.5mm.49 7.04 9.74.4990.4990 5.7 9.74 4.8.5000 5.7 8. 9.7.500.500 5.7 9.74 4.8 mm.58.49 7/.5.0 5.0 4.9.5mm.55 4.84 4mm.55.0 9/.55.00.85 47.0 4.5mm.5709.0 5mm.590.0 9/.597.00.85 47.0 5.5mm.0 9..50 7.49 4.7 54.90 mm.99 9..5mm.49 9. /.5 4.4 4.55.07 7mm.9 44. /.875 4.4 44.5.07 7.5mm.890 47.0 8mm.7087 47.0 /.787 47. 49.8 9.9 Price Size Decimal 700 740 700C 8.5mm.78 49.47 9mm.7480 54.79.7500 47.4 49.8 9.70 9.5mm.777 5.7 5/.78 5.4 54.04 7.5 0mm.7874 5.49 0.5mm.807 5.49.85 5.4 54.04 7.5 mm.88 5.49 7/.847 0.49.97 88.9.5mm.845 5.84 mm.8 5.84 7/8.8750.90 5.4 90.99.5mm.8858 7. mm.9055 7. 9/.90.70 70.5 98.04.5mm.95 7.0 5/.975.70 70.5 98.04 4mm.9449 7.0 4.5mm.94 7.0 /.987 74.7 78.98 09.80 5mm.984 7.47.0000 75.4 79.00 0.84 -/.05 8.0 88.9.84 -.50 88.8 9.95 0.5 -.875 04.0 0.0 5.9 -.500 0.7.0.07-5/.5 8. 5.98 89.04 -.750 5. 4.9 98.9-7/.475 44.94 5..0 -.5000 5.0 4.99 9.4 TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page 9

CUTTING TOOLS CAP SCREW COUNTERBORES HIGH SPEED STEEL - STRAIGHT SHANk Size 4 5 8 0 5/ 7/ 7/8 Description Std. /4 O/S / O/S Std. /4 O/S / O/S Std. /4 O/S / O/S Std. /4 O/S / O/S Std. /4 O/S / O/S Std. /4 O/S / O/S Std. /4 O/S / O/S Std. /4 O/S / O/S Std. /4 O/S / O/S Std. /4 O/S / O/S Std. /4 O/S / O/S Std. /4 O/S / O/S Std. /4 O/S / O/S Std. /4 O/S / O/S Style No. 500 400 00 500 400 00 500 400 00 500 400 00 500 400 00 500 400 00 500 400 00 500 400 00 500 400 00 500 400 00 500 400 00 500 400 00 500 400 00 500 400 00 Pilot Dia..0.70.40.50.400.50.80.50.90.40.790.950.900.050.0.500.50.80.5.80.40.750.900.400.470.450.480.5000.550.50.50.400.50.7500.750.780.8750.890.900.0000.050.00 Pilot Length 5/ 5/ 5/ 7/ 7/ 7/ 9/ 9/ 9/ 5/ 5/ 5/ 7/ 7/ 7/ 7/8 7/8 7/8 Flute Dia..80.990.50.050.0.70.70.40.590.700.80.00.0.80.440.800.90.40.4740.4890.5040.590.5850.00.0.70.90.7550.770.7870.990.9840.0000.50.70.880.440.590.750.50.5470.50 Flute Length 9/ 9/ 9/ 7/8 7/8 7/8 4 4 4 4 4 4 5 8 5 8 5 8 7 8 7 8 7 8 Shank Dia..5.5.5.875.875.875.88.88.88.500.500.500.8.8.8.5.5.5.750.750.750.5000.5000.5000.5000.5000.5000.5000.5000.5000.50.50.50.7500.7500.7500.8750.8750.8750 Overall Length 7 8 7 8 7 8 4 8 4 8 4 8 4 5 8 4 5 8 4 5 8 5 5 5 5 4 5 4 5 4 5 5 8 5 5 8 5 5 8 8 8 8 7 7 7 7 7 7 7 5 8 7 5 8 7 5 8 7 4 7 4 7 4 8 8 8 8 8 8 Price Each.8.80.80.8.80.80. 4.4 4.4 4.7 5.8 5.8 5.9 5.89 5.89.57 7.77 7.77.0 4.70 4.70 5. 7. 7. 4.85 44.77 44.77 49.07 5.9 5.9 80.04 8. 8. 9. 97.4 97.4.4 8.5 8.5 4.87 50. 50. O/S = Oversize Sets Available On Request Page 0 TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97

SHAFT SUPPORT RAILS & TWIN PILLOW BLOCkS For effective, low cost continuous or intermittent support, extruded aluminum support rail is available in a full range of sizes (see specification chart below). These rails can be supplied with or without mounting holes and can be used vertically or horizontally to provide optimum rigidity. Available in standard lengths of 4 + 0, - which can be easily cut to meet shorter length requirements. EXTRUDED ALUMINUM SUPPORT RAILS Part Nom. Price A B C D E F G Wt. per Shaft No. Each ±.00" 4 (ths.) Size SR-8.8.5 #8 # or #8. SR-0 5 8 8.90.5 5 8 5/ 8 #8 # or #8. SR- 4 4.80.500 4 4 #0 #8 or # 0.0 SR- 47.5.750 8 #0 or.8 SR-0 4 7.0.5 9/ 5/ 7 8 5/ or 5/ 4. SR-4 88.7.500 / 4 5/ 5/ or 5. SR- 0.07.50 4 7/8 4 or 8.4 LINEAR MOTION COMPONENTS A - Dimension will vary with the shaft diameter. E - Suggested location for mounting hole. F - Maximum mounting bolt size to clear pillow blocks. G - Recommended thread for screws to attach shaft. NC or NF Class threads may be used. EXTRUDED ALUMINUM support rails with pre-drilled holes to mate with pre-drilled shafts Part Shaft Net A B C D E F G Approx. Wt. In No. Diameter Price ±.00 Bolt Hole Screw Hole Lbs Per 4 SR-8-PD.05.5.9 -x7/8.9. SR-0-PD 7.0.5 5 8 5/ 8 8.9 8-x7/8.9. SR--PD 8..500 4 4 0. 0-x 4..0 SR--PD 9.40.750 8.8-0x.8.8 SR-0-PD 4.77.5 9/ 5/ 7 8 5/.4 5/-8x 4.4 4. SR-4-PD.8.500 / 4 5/.4 -x.40 5. SR--PD 75.0.50 4 7/8 4.40 -x.5 8.4 Pre-drilled support rails are stocked for immediate delivery in standard 4 lengths, but can be easily cut to size. When longer shafts are to be supported, the rails can be continuously mounted end-to-end or intermittently mounted to any desired length. DIMENSIONS & LOAD RATINGS FOR TWIN PILLOW BLOCkS Twin Shaft Price Pillow Block Diameter Each Model Number Nom. Max. Dynamic Load Rating (Pounds) Wt. A B C D E F G H J K L (Lbs) ±.00 ±.005 ±.005 Bolt Hole ±.005 ±.005 TWN-8-OPN.4995 8. 800.5.87 5.88.500 # 5.40 5.500 TWN-0-OPN 5 8.45 9. 000.9.875 4.5.000 5 #8.70 8.5 TWN--OPN 4.7495 9.5 00..97 4 4 9.75.500 #8.00 7.500 TWN--OPN.9995 8.75 90..87 4.875 4.500 8 #0 7.0.750 TWN-0-OPN 4.495 9.07 800.8.500 4 7 9.500 5.500 4 #0 7.44 4.5 TWN-4-OPN.4994 44. 0.5.750 4 4 9 7 8 4.5.500 7 8 4 9.474 5.500 TWN--OPN.9994 54.4 4800.8.5 5 8 5.50 0.500 8.00 8 8.50 TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page

LINEAR MOTION COMPONENTS FRACTIONAL CASE HARDENED AND GROUND SHAFTING SOLID AISI C-00 CASE HARDENED STEEL SHAFTS (ROCkWELL 0 to 5 C) Price Per Inch Weight Min. Tolerance Code Nominal of Length Per Depth Max. Diameter A B R M g Codes Code Inch of Length A, B & g R & M (Lb.) Hardness (feet).485/.490.490/.495.498/.500.494/.498.49.55.04.040 8.75/.740.740/.745.748/.750.744/.748.55.7.0.040 4.4985/.4990.4990/.4995.4998/.5000.499/.4998.58.8.055.00 5.5/.40.40/.45.48/.50.4/.48.7.97.08.00 5.7485/.7490.7490/.7495.7498/.7500.749/.7497.9.0.5.00 5 7/8.8740/.8745.8748/.8750.4.9.70.00.9985/.9990.9990/.9995.9998/.0000.0000/.000.999/.9997..5..080 5.40/.45.48/.50.45.75.8.080.485/.490.490/.495.498/.500.500/.50.490/.497.89..48.080 5.740/.745.747/.750.5.59.40.080.4984/.4989.4989/.4994.4997/.5000.5000/.500.4990/.4997.40.9.500.080 5.7490/.7495.7497/.7500.88 4.8.8.00 5.9980/.9987.9987/.9994.9997/.0000.0000/.000.9989/.999 4. 5.4.890.00 5.4977/.4985.4985/.499.499/.5000. 7.88.9.00 5.9974/.998.998/.999.999/.0000 8.4 0.40.00.00 SOLID AISI 440C CASE HARDENED STAINLESS STEEL SHAFTS (ROCkWELL 50 to 55 C) Price per Weight Minimum Maximum Tolerance Code Nominal Inch of Per Depth of Length Diameter A B g Length Inch Hardness (feet).485/.490.490/.495.494/.498.7.04.040.75/.740.740/.745.744/.748.8.0.040 4.4985/.4990.4990/.4995.499/.4998.7.055.00 5.5/.40.40/.45.4/.48..08.00.7485/.7490.7490/.7495.749/.7497.45.5.00.9985/.9990.9990/.9995.999/.9997.0..080.485/.490.490/.495.490/.497 4.94.48.080.4984/.4989.4989/.4994.4990/.4997.7.500.080.9980/.9987.9987/.9994.9989/.999.0.890.00 PRICING INFORMATION To determine the price of a shaft, use the price per inch and when a shaft length ends in a fraction, price to the next full inch. However, there is a minimum charge of $.00 per shaft. There is a $5.00 set-up charge per diameter per shipment to cover cutoff, handling and boxing. STANDARD SHAFT SPECIFICATIONS Solid AISI C-00 Steel Shafts are case hardened to Rockwell 0 to 5 C, and AISI 440C Stainless to Rockwell 50 to 55 C. Tubular 500 shafts are case hardened to Rockwell 5 to C. Shafts up to diameter are cut to required lengths within ± / and to within ± / for to diameter, and to within ± for &. Except for and diameters, straightness is held to within.00 to.00 per foot cumulative and surface finish is maintained between 0 and micro inches RMS. Page TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97

METRIC CASE HARDENED AND GROUND SHAFTING METRIC DIAMETER SOLID AISI C-00 CASE HARDENED STEEL SHAFTS (ROCkWELL 0 to 5 C) Nominal Metric Price per Weight Minimum Maximum Diameter Tolerance Inch of Per Depth of Length (mm) (inch) Length Inch Hardness (feet) 8.4/.50.8.0.040 0.9/.97.57.04.040 5.470/.474.7.050.00 5.95/.99.7.088.00 5 0.789/.7874.0.8.00 5 5.988/.984.4..080 5 0.80/.8.0..080 5 40.574/.5748.08.55.080 5 50.979/.985 4.7.84.00 5 LINEAR MOTION COMPONENTS METRIC DIAMETER SOLID AISI 440C CASE HARDENED STAINLESS STEEL SHAFTS (ROCkWELL 50 to 55 C) Nominal Metric Price per Weight Minimum Maximum Diameter Tolerance Inch of Per Depth of Length (mm) (inch) Length Inch Hardness (feet) 8.4/.50.84.0.040 4 0.9/.97.87.04.040 4.470/.474.88.050.00 5.95/.99.4.088.00 0.789/.7874.7.8.00 5.988/.984.8..080 0.80/.8 5.88..080 40.574/.5748.90.55.080 50.979/.985 5..84.00 METRIC DIAMETER SOLID AISI C-00 CASE HARDENED STEEL SHAFTS (ROCkWELL 0 to 5 C) WITH PRE-DRILLED AND TAPPED MOUNTING HOLES Nominal Metric Price per X Maximum Diameter Tolerance Inch of Hole spacing ±.05 Length (mm) (inch) Length Non-cumulativeU Tap Size (feet) PD.470/.474.9 75 mm M4 x.7 5 PD.95/.99.5 00 mm M5 x.8 5 0 PD.789/.7874.5 00 mm M x 5 5 PD.988/.984.7 0 mm M8 x.5 5 0 PD.80/.8.95 50 mm M0 x.50 5 40 PD.574/.5748 5.07 00 mm M0 x.50 5 50 PD.979/.985.50 00.mm M x.75 5 PRICING INFORMATION To determine the price of a shaft, use the price per inch and when a shaft length ends in a fraction, price to the next full inch. However, there is a minimum charge of $.00 per shaft. There is a $5.00 set-up charge per diameter per shipment to cover cutoff, handling and boxing. STANDARD SHAFT SPECIFICATIONS Solid AISI C-00 Steel Shafts are case hardened to Rockwell 0 to 5 C, and AISI 440C Stainless to Rockwell 50 to 55 C. Tubular 500 shafts are case hardened to Rockwell 5 to C. Shafts up to diameter are cut to required lengths within ± / and to within ± / for to diameter, and to within ± for &. Except for and diameters, straightness is held to within.00 to.00 per foot cumulative and surface finish is maintained between 0 and micro inches RMS. TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page

LINEAR MOTION COMPONENTS PRE-DRILLED SHAFTS & SUPPORT RAILS PRE-DRILLED SHAFTS Solid AISI C-00 AND 440 C Stainless Steel Case Hardened Shafts with pre-drilled and tapped mounting holes Nom. Diameter Diameter Price per inch Max Length X Hole Spacing±.05 Tap Size Tolerance C-00 440 C (FEET) (non-cumulative) (to center of shaft) PD.4990/.4995.7 4.07 5 4 - PD.40/.45.80 4.5 4 8- PD.7490/.7495.9 4.7 0- PD.9990/.9995. 5.4-0 4 PD.490/.495.80 7.0 5/-8 PD.4989/.4994 4.7 8.9 8 - PD.9987/.9994.8 5. 8 - PRICING INFORMATION To determine the price of a shaft, use the price per inch and when a shaft length ends in a fraction, price to the next full inch. However, there is a minimum charge of $.00 per shaft. There is a $5.00 set-up charge per diameter per shipment to cover cutoff, handling and boxing. STANDARD SHAFT SPECIFICATIONS Solid AISI C-00 Steel Shafts are case hardened to Rockwell 0 to 5 C, and AISI 440C Stainless to Rockwell 50 to 55 C. Shafts up to diameter are cut to required lengths within ± / and to within ± / for to diameter, and to within ± for &. Straightness is held to within.00 to.00 per foot cumulative and surface finish is maintained between 0 and micro inches RMS. LOW SHAFT SUPPORT RAILS Part Shaft Net A B C D Hole spacing Approx. Wt. In Price No. Diameter Each ±.00 ±.005 (Ref.) Screw Hole X Y Lbs Per 48 LSR-8.500.40 LSR-8-PD 5.98.5.70.4 -.9 4. LSR-0.5 5.99 LSR-0-PD 5..87.450.4 8-.9 4.4 LSR-.750. LSR--PD.95.750.50.40 0-..5 LSR-.000.8 LSR--PD 9..000.90.50-0.8 4.5 LSR-0.50 0.5 LSR-0-PD 89..87.780. 5/-8.4 5.08 LSR-4.500 7.88 LSR-4-PD 99.5.75.90.70 -.40 8 4.7 LSR-.000 50.59 LSR--PD 9.54.750.80.845-7/ 8 4.00 Low shaft support rails permit the design of compact linear motion systems with more than a 40% lower profile. The low shaft support rails are made of AISI C-00 steel. Continuous or intermittent support is permissible when using linear roller bearing pillow blocks or the opentype linear ball bearing pillow blocks as made by Thomson Industries. LSR-PD rails have predrilled mounting holes to match the holes in the pre-drilled and tapped holes in the PD Series shafts described above. Standard length for all low shaft rails is 48. Page 4 TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97

NITRIDED EJECTOR SLEEVES /4 MOLD & DIE SUPPLIES / 4 For / & 7 / DIA. Nitrided Ejector Sleeves are made of the finest grade of hot work die steel. The heads are hot-forged for strength. The outside surface is nitrided to a hardness of 4-74 Rockwell C and GROUND AFTER NITRIDING FOR STRAIGHTNESS AND FINISH. The bearing diameter is 00 Brinell and is finished, reamed and honed concentric with the O.D. of the sleeve. H F List Price Each B D Head Head O.D. I.D. Dia. Thick. L-4" L-5" L-" L-7" L-8" L-9" L-0" L-" L-" 7/ 5/ / 7/ / 7/8 " / 5/ 7/ 5/ 7/ 9/. 7/ 9/ / 7/8 5/ 8.5 7.90.0.80.05.55.05.0 5.5.80.00 7.50 4.50.45 0.90.0.05.0 4.0 5.0 7.90 0.40.45.50 4.00 45.50.95.45 4.0 5.0 5.0.5 8.5 0.40 5.50 7.00 40.00 45.00 49.50 7.00.50.5 7.5 8.40 8.90 0.90.45 8.50 40.55 44.00 49.00 54.00 8.90 0.40.45.95 4.45 7.00 4.55 44.0 48.00 5.50 58.50.95.45 5.50.00 8.50 44.05 4.0 49.5 5.00 58.50 4.00.00 7.50 9.05 40.05 4.55 45.0 5.0 54.0 57.50.50 9.50 4.50 44.50 47.50 50.50 5.50 59.50.00 9.50 75.00 4.50 49.50 5.50 5.00.00 5.00 8.50 75.00 8.50 OVERSIZE O.D. EJECTOR SLEEVES AVAILABLE (+.005 over standard B dimension) CALL FOR PRICING AND DELIVERY TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page 5

MOLD & DIE SUPPLIES +.5.0 EJECTOR PINS NITRIDED EJECTOR PINS H Hot Work Die Steel Surface Hardness R/C 4-74 Core Hardness R/C 5-40 Forged and Annealed Heads Body Nitrided Honed Finish STANDARD EJECTOR PINS D H T Length Pin Head Head Dia. Dia. Thick. L-" L-0" L-4" L-8" /4 / 5/4 / 7/4 9/4 5/ /4 /4 7/ 5/4 7/4 9/ 9/4 5/ /4 / /4 / 7/ 5/ 9/ / 7/8 " 9/ / / / 7/ 7/ 7/ 9/ 9/ / / 7/8 " - - 5/.7 5.75 5.75 5.9 5.9.84.8.95.5.07.54.0.7.5 4.9 4. 4.70 4.54 5.4 5.0 5. 5.8 5.94.5 8.8 7.80 9.4.7 4.7 5.58 4.09 5.7 7.7 7.4.94 5.8 5.8..8.0.59.5.9.9 4.0 4.8 5.05 5.5 5.54 5.8..5.95 7.5 8.08 8.87 9.74 0.58. 5.44 8.0 0.9 40.0 40.0. 0.4 0.9 9.45 8..9 4. 4.4 4.7 4.9 5.05 5. 5.5 5.54.05..95.95 8. 8. 8.80 8.87 0.45..9.9.75 9.44 5.8. 8. 78.94 9.4 8.7 5.9.5 5.79 5.7 7.09 8. 9.4.98.77 5..9 8..88 5.5 9.78 4.07 9. 0.4.005 OVERSIZE EJECTOR PINS D.005 H T Length Over Head Head Std. Dia. Dia. Thick. L-0" L-4" /4 8.5 / 8.5 5/4 8.5 / 7.59 7/4 7.59 4..4 4. 9/4.8 5/ 9/ 5/.9 4.9 /4 / 4.07. 5.0 /4 4.9 7/ /.4 5/4 / 4.78 7/.47.4 7/4 7/ 5.8 9/ 7/.8 9/4 5.94 5/.90 7.74 /4 9/.7 / 9/ 7.0 /4 7.5 8.4 9.7 / / 9. 7/ / 0.0.00 5/.07.07 4. ALSO AVAILABLE IN METRIC SIZES Page TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97

EJECTOR PINS NITRIDED EJECTOR PINS SHOULDER TYPE Ejector pins are made from the best air hardening hot work die steel and heat treated for a tough core. The head is solid forged and annealed to prevent breakage. The body of the pin is nitrided to give a surface hardness of 4-74 Rockwell C then honed for a smooth friction free surface. MOLD & DIE SUPPLIES SHOULDER PINS SHOULDER PINS D Pin LENGTH Dia. 0 4 /4 5.9 7.7 9.59 /4 O.S. 8.5 / 5. 7.00 9.0 / O.S. 7.80 5/4 5. 7.00 9.4 5/4 O.S. 7.80 / 5.0.7 8. / O.S. 7. 7/4 5.0.7 8. 7/4 O.S. 7. O.S. Pin Diameter is.005 over standard diameter ECONOMY EJECTOR PINS D Pin LENGTH Dia. 0 4 /4 5.7. 9.8 /4 O.S. 7.95 / 5.55.8 8.7 / O.S. 7.48 9.0 5/4 5.55.8 8.9 5/4 O.S. 7.48 9.0 / 4.80.0 8. / O.S..8 8.9 7/4 4.80.0 8.5 7/4 O.S. 7.0 8.9 Oil Hardening Tool Steel Hardness R/C 58/0 Heads Annealed R/C 4/45 Ground O.D. ±.0005 BODY HEAD HEAD PRICE EACH DIA (D) DIA (H) THICK (T) 4 0 / 7/4 /4.7 4. 5/4 9/4 /4.0.8 / 5/ 5/4.94.70 7/4 5/4.0.78 7/ /.7. 4.4 9/4 7/4.7. 4.4 5/ 7/4.7. 4.4 /4 5/.77.47 4.5 5/ 9/4.77.47 4.5 /4 / 5/.0.54 4. BODY HEAD HEAD PRICE EACH DIA (D) DIA (H) THICK (T) 4 0 7/ 5/.5.8 4.89 5/4 / /4. 4.0 5.0 7/. 4.0 5.0 7/4 7/.89 4. 5.4 9/ 7/.89 4. 5.4 9/4 4. 4.7 5.7 5/ 4. 4.7 5.7 /4 9/ 4. 4.57.0 / 9/ 4. 4.57.0 /4 4.7 4.80.49 4.7 4.80.49 TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page 7

MOLD & DIE SUPPLIES HIGH SPEED STEEL PUNCHES Hutchinson High Speed Steel Punches are manufactured from the finest quality AISI type M- high speed steel, heat treated and tempered to Rockwell C 0-, then precision ground to uniform close tolerances. T L STYLE A L STYLE B Set-Up Charges (Shaded area only) - 4 = 5.00-8 = 45.00 Dia. D Increment of.00 H T 4 8 0.00 -.04.05 -.09.00 -.09.00 -.0.07 -.04.047 -.055.05 -.04.05 -.078.079 -.087.088 -.099.00 -.0. -.. -.47.48 -..4 -.79.80 -.94.95 -.0. -.5. -.4.4 -.57.58 -.7.7 -.88.89 -.04.05 -.0. -..7 -.5.5 -.8.9 -.75.7 -.4.47 -.484.485 -.5.5 -.5. -.000 / / /4 / 5/4 / 7/4 9/4 5/ /4-4 7/ 5/4 7/4 9/ 9/4 5/ /4 / /4 5/4 / 7/4 7/ +.0 D +.09 / / / / / 5/4 5/4 5/4 / / / / / / / / / / / / 4.85 5.8 4.00 4.85..9.8.8.8.58.58.58.98.98.98 4.5 4.5 4.5 4.85 4.85 4.85 5.7 5.7 5.7 5.7.4.4.4 8.5 8.5 8.5 9.87..58 4.9 7.7.8 5.8 5.7 5.7 4.4 4.58 4.58 4.58 4.98 4.98 4.98 5.5 5.5 5.5 5.95 5.95 5.95.7.7.7.7 8.7 8.7 8.7 9.47 9.47 9.47.9.8. 8.9 0.44 9.8 8.8 7.97 7.7.9 7.04 7.04 7.04.55.55.55.79.79.79 7.4 7.4 7.4 8. 8. 8. 8. 9.7 9.7 9.7 0.99 0.99 0.99.44 5.7 7.5 0.59.49..87.87.87.4.4.4.48.48.48.4.4.4 4. 4. 4.. 4..85.85.85 8.98 8.98 8.98.44.9 5.0 8.0 QUOTED ON REQUEST.7 0.7.45.45 0.7 8.79 8.79 8.79 7.50 7.50 7.50 9.85 9.85 9.85.5.5.5.5.75.75.75 7.47 7.47 7.47 0.07.4.9 7.0.7.7.7 4.4 4.4 4.4 7.78 7.78 7.78 9. 9. 9. 9..7.7.7 8.47 8.47 8.47 4. 45.8 47.50 5.95.8.8.8.45.45.45 5.74 5.74 5.74 8. 8. 8. 8. 4.8 4.8 4.8 49.47 49.47 49.47 54.0 58.74.0.5 WHEN ORDERING, SPECIFY STYLE, DIA. AND LENGTH SEE PAGE 9 FOR CONVENIENT QUOTATION REQUEST FORM FOR SPECIAL STYLE A AND STYLE B PUNCHES TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97 Page 8

QUOTATION REQUEST FORM STEEL PUNCHES For special Style A and Style B punches, copy and fax to: (908) 88-89 MATERIAL HARDNESS R/C MOLD & DIE SUPPLIES STYLE B STYLE A QUANTITY PLEASE INCLUDE ALL TOLERANCES AND CONCENTRICITY REQUIREMENTS FROM: PHONE: COMPANY: FAX: CORE PINS D H T STANDARD HARDNESS HIGH HARDNESS PIN HEAD HEAD PRICE EACH PRICE EACH DIA DIA THICK. " " 0" " " 0" /.0.40 7.4.55.85 8.0 7/4.40. 7.85.78.97 8.4.89.95 5.5 4.09 4. 5.54 9/4.89 4.0 5.5 4.09 4.4 5.54 5/ 9/ 5/.95 4.09 5. 4. 4.4 5.54 /4 /.95 4.09 5.54 4.9 4.54 5.9 4.0 4.8 5. 4.9 4.8 5.9 /4 4.09 4. 5.9 4.4 4.75. 7/ / 4.8 4.4 5.9 4.54 4.8. 7/ 4.54 4.75.4 4.89 5.8. 9/ 7/ 4.9 5.8.9 5.40 5.9 7.4 5/ 5.54 5.9 7.4 5.98.0 8. / 9/ 5.98.0 8..49.85 9.08..9 9.08 7. 7.48 9.94 / / 7. 7.4 9.8 7.4 8.4 0.80 7/ / 7.9 8.4 0.80 8.5 8.94.8 5/ 8.5 8.94.80 9.8 9.7.0 9.8 9.5. 9.94 0.5 4.0 9/.9 5.05..4 7/8.4 7. 4.40 9.45 8.5 4.9 9.8. +.000 -.00 / MAX. R +.000 +.00 -.00 -.000 +.00 -.000 Standard Hardness R/C 0-5 High Hardness R/C 50-54 Air Hardening Hot Work Die Steel Precision Ground After Heat Treating Heads Forged and Annealed TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page 9

MOLD & DIE SUPPLIES H +.000 -.00 PUNCH BLANkS L T +.0 +.0 +.005 +.00 D +.000 +.0004.0.0 OPTIONAL T, A- AND M- ONLY Body L Price Diameter Diameter Length PM PM D H T A- M- D- " Increments M-4 0V () / 4-9.4 0.05.5 4.47.85 5/ () / 4 - / 9.5 0.8.8 5.94 8.5 () / 4 - / 9.5..54.7 0.4 5/ 7/ () / 4-4.04..49 7.70.7 () / 4-4 4.9.54.8 0.4.59 7/ 9/ / 4-4.44 8.4 8.9 4. 8.8 / 4-4 7. 0.87.5.0. () / 4-4 8.8.44.9.4 9.84 7/8 () / 4-4 4.4 8.89 0.7 44.8 55.7 () / 4-4 5.8 4.5 48.0 7.48 88.00 EXTRA LONG " AND 8" Body Head Price Diameter Diameter Thickness " 8" D H T A- M- A- M-.9 9.80.47 4.5 5/ 7.7 0..9 5.8 8.8.7. 7.0 5/ 7/.8. 7.74.40 4.5.5.5 8. 7/ 9/ 7.9.80 5.74 4. 8.4 4.9.5 4.78 0. 40.9 4.74 59.08 7/8 9.5 50.70 55.48 7.9 ".89 8.08 84.4 07.85 M- R/C 0- D- R/C - A- R/C 0- PM-M4 R/C - PM-0V R/C - Page 40 TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97

RECTANGULAR L Net B A Overall Price Size Length Each x" ".45 x5/ 4 4.47 x 9. x 4.89 x 0.8 x 4.5 x.74 x 5 40. x 4.7 x 7.54 5/x7/ 4 4.94 5/x 5.97 5/x 5.00 5/x 5 9.79 5/x 9. x.44 x 4 8.5 x 4.9 x 4 4.05 x 5 47.7 x 48.57 x 4 44.88 x 5 5.7 x 55.8 x 0.87 x 4 50.44 x 5 55.5 x 8.89 x 7 0. x 4 7 84.9 x 7 9. x 5 00.5 x7/8 8.9 x 7 78.80 x 4 7.7 x 80.45 x 4 8.00 WkE45 SUPER COBALT HSS TOOL BITS METRIC RECTANGULAR SQUARE METRIC SQUARE L Net L Net L Net B A Overall Price Size Overall Price Size Overall Price Size Length Each Square Length Each Square Length Each xmm 90mm 9.0 " " 9.0 4mm mm 9. x 00 9.0 4 5.0 4 00 5.94 4x0 00.4 0.04 5 8.87 4x 0 4.85 4. 5 0 4.5 4x 00 47..8.49 4x0 00 49.4 8 0. 00 9.0 5x0 00.8 5/.7 0 7.8 x8 70 9. 5/ 4.0 00.85 x0 00 50.7 5/ 4 8.9 7 00 5. x 00 54.7 5/ 8.4 8 5.89 x4 40 4.85 5/ 8 47.4 8 00 5. x0 00 77. 5.94 8 0.40 8x 0 5.79 4.09 8 00 9.50 8x 00.77. 0 5 5.84 8x 40 54.9 8 5.4 0 0 7.79 8x 0 55.9 7/. 0 00 47.8 8x 00 7.8 4 9.0 00 9.7 8x0 00 0.59 4.7 0 4.90 0x 00 7. 8 80.7 00 5.44 0x4 80.04 4 5.05 4 00 54.8 0x4 00 7.88 94.4 4 0 80.4 0x 0 70.7 5 7.8 4 00 78.79 0x 00 88.88 87.47 00 5.9 0x0 0 84.7 5 9.8 0 0.47 0x0 00 97.4 8 74.0 00.45 0x40 00 9.75 8 00 5.8 x 00 94.9 0 0 54.08 x5 00 08. 0 00 88.98 x0 00 40.8 5 00 4.8 4x0 00 8.54 x0 00 40.55 0x5 00 8. Square section AVAILABLE UNTIL STOCk IS EXHAUSTED All Toolbits can be custom ground to meet your requirements SHOP TOOLS & SUPPLIES WkE45 TYPICAL ANALYSIS C Cr Mo W V Co.40 4..5 9.0.5.0 SEE PAGE FOR WKE45 ROUND BLANKS TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page 4

SHOP TOOLS & SUPPLIES Square - Ground High Speed Tool Bits Tolerance on Width and Thickness ±.00 Ends Beveled 0 SQUARE & FLAT FORM TOOL BITS SIZE M R/C 4.5- M R/C 5-.5 M4 R/C 7-9 M4 T5PM PM M-48 R/C 5-7 R/C 5-7 R/C 5-7 sq. x " 9.40 9.9 9.70 9..9 8.4 sq. x " 5. 5. 5.54 5.40 7.8 7.8 sq. x ".5 5.80.94.08 8.04 9. 5/ sq. x " 7.8.49 8.50 7.0 9.45 4.59 sq. x " 8.84 0.04 9.70.97 8.47 7/ sq. x ".44.0.99.8 7.07 4.4 sq. x 4" 5. 5.8 8.9 7.94 4.05 5. sq. x 4".00.7 8.08 7. 7.54 5.80 sq. x 5".77.9 44.7 44.07 59.4 8.5 7/8 sq. x " 54.04 58.5 70. 94.7 sq. x 7" 7..5 0.95 40.7 SIZE " x " x -" x " x " x " x " x " x 4" x " x " x " x 5" x " x " 5/" x 7/" x " x 7/" x -" x " x " x " x 4" " x " x " x " x 4" x " x " x " x 4" x " x 4-" x " x 5" x " x " x " x 4" x " x 5" x " x " x " x " " x " x 4-" x " x 4" x " x 5" x " x " x " x 7" x " x 8" " x " x 5" x 7/8" x " x " x 7" x -"x 7" x -"x 7" M M M4 M4 T5PM R/C 4.5- R/C 5-.5 R/C 7-9 R/C 5-7 R/C 5-7 7. 8.87 9.48.7 8.87 7.04.98 0..78.5 5.5.8 4.97.5.8 8. 4.44 8.9.00 7.57 4.09 0..9 5.4 0.77 5. 59. 4.8 47.8.7 79.0 9.0 7.90 8.40 5. 57.70.0 4.7 0.7.7 4.4 4.5 9.4 8.7.49 9.8 45. 7.5.9 7.74 45.8 4. 84.54 05.57.78.74 7..7 7.9..0 4.75.94.0. 8.0.4 55.5.4 4.70 84.50 55.9 78.0 0. 8.9 5.7 AVAILABLE UNTIL STOCk IS EXHAUSTED Flat Form - Ground High Speed Tool Bits Tolerance on Width and Thickness ±.00 Square Ends Additional Sizes and Materials Available Call for Price and Delivery All Toolbits can be custom ground to meet your requirements Page 4 TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97

SIZE " x " x " x " x 7" x -"x 7" x -"x 7" 7/8" x -"x 7" x -"x 7" " x -"x " SQUARE & FLAT FORM TOOL BITS Thin Flat Form - Ground High Speed Tool Bits Tolerance on Width and Thickness +.00 -.000 Square Ends T5 & T5PM Long High Speed Tool Bits R/C 5-7 SIZE x sq. x " x sq. x " x sq. x 8" 5/ x sq. x " x sq. x " x sq. x 8" 7/ x sq. x " x sq. x " x sq. x 8" x sq. x " x sq. x 8" M M R/C 4.5- R/C 5-.5.4 74.07 9.0 0. 98.0 08.9 98.7 AVAILABLE UNTIL STOCk IS EXHAUSTED T5PM 7.45 9.0 5.7.7 5.9 4.55 9.7.07 48.09 50.04.74 Tolerance on Width and Thickness ±.00 Ends Beveled 0 79.0 M4 R/C 7-9 99.9.9 40.0 4.4.8 T5 R/C 5-7.58 5.78 7.5 77. 5.0 Flat Form - Ground High Speed Tool Bits Tolerance on Width and Thickness ±.00 Square Ends SIZE /" x " x " x " x " x " x " x 7/8" x " x " x " /" x " x " x " x " x " x " x 7/8" x " x " x " " x " x " x " x " x " x " x 7/8" x " x " x " 5/" x " x " x " x " x " x " x 7/8" x " x " x " " x " x " x " x " x " x " x 7/8" x " x " x " " x " x " x " x " x " x " x 7/8" x " x " x " M R/C -4 0. 0.87.7..99.4.0. 4.4 5.70.44.04 4.94 5.7 7.8 5.4 4.8 7.50 7.94 0.79 4.54 5.94 7.77 9.4.4 8.87 8.44..4.98 M4 R/C -8 4..4. 5.7 8.9.97 4.0 5.79 7.0 8.84 0.50 5.4.4 8.9 8.7 9.57 7.9.50. 8.0 8.00 9.44.9 4..5 0.7.7 5. 8.4 4.4 T5PM R/C 5-7.09.4 5.0.5 7.9 8.50 5.9.4 8.7 5.4 8.4.7.4 0.7. 0.4 9. 4.4 4.49 9.7 0.9.9 4.07.7 9.54. 5.0 9.8.47 4.75 Typical Analysis of High Speed Steel Tool Bit Materials C Cr Mo W V Co M.85 4.5 5.00.0.85 M.0 4.0 5.00.00.00 M4.0.75 9.50.50.5 8.5 T5 & T5PM.57 4.00.5 5.00 5.00 M4.90.75 8.00.50.05 8.5 SHOP TOOLS & SUPPLIES TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page 4

SHOP & TOOL SUPPLIES Style 000 Style 000 Dimensions Blank Number Price Blank Number Price T W L R STYLE 000-49 pcs. STYLE 000-49 pcs. / / / / / / / / / / / 5/ 5/ 5/ 5/ 7/ 5/ 5/ 5/ 5/ 5/ 7/ 7/ CARBIDE BLANkS STYLE 000 & 000 W 5/ 5/ 7/ 9/ 7/ T L 00 00 00 040 050 00 070 080 090 00 05 0 0 0 40 50 0 70 80 90 00 0 5 0 0 40 50 0 70 80 90 00 0 0 0 40 C- GRADE PREMIUM MEDIUM GRAIN CARBIDE WITH -8% COBALT.8.7.8.70.9.89.04.98.09.0.4.5.97.....5.47.8.9.90 4...9.74.55..4.9.9..99.8 4.4. W T 00 00 00 040 050 00 070 080 090 00 05 0 0 0 40 50 0 70 80 90 00 0 5 0 0 40 50 0 70 80 90 00 0 0 0 40 L R.8.7.8.70.9.89.04.9.98.5.4.0.0.4...4.5.47.4.9.90 4.9..9.70.55..4.5.9.07 4.0.8 4.4.0 ALL STYLE 000, 000, STB & STBL SERIES BLANKS LISTED ARE UNGROUND GROUND BLANKS TO YOUR SPECIFICATIONS ARE AVAILABLE PRICES UPON REQUEST THICKNESS: MINIMUM GRIND STOCK / TO 5/ +0.04 - +0.05 ON ALL DIMENSIONS TO +0.0 - +0.00 ON ALL DIMENSIONS C-5 GRADE PREMIUM MEDIUM GRAIN CARBIDE WITH 0% COBALT ALSO AVAILABLE Page 44 TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97

Dimensions Blank T W L Number Price ea. / / STB-.89 / / - STB-A.8 /4 / STB-A.0 /4 / STB-. / / STB-L.09 / STB-4A.7 / - STB-4C.44 / - STB-4D.5 / STB-4B.5 / STB-4L.5 / STB-A. / STB-C.87 / STB-L 9.47 / STB-8A.75 / - STB-8B.7 / STB-8D 5.0 / STB-8L 9. / 5/ STB-0L 7.87 / STB-L 0. / STB-L.9 / STB-0L. / STB-4L 7.8 / STB-L 4.4 5/4 - STB-4.4 / 5 STB-4.99 / 8 STB-4L 9.0 / - STB-.9 / - STB-A. / 8 STB-L 0.7 / STB-8A. / - STB-8B.8 / 5 STB-8D 0.49 / 8 STB-8L. / 5/ STB-0A 5.5 / 5/ STB-0B 5.9 / 5/ 5 STB-0C 9.8 / 5/ 8 STB-0L 5. / 5 STB-.9 / 8 STB-L 7.90 / 8 STB-L.59 / 8 STB-0L 9. STB-44L.48 CARBIDE BLANkS STYLE STB - STBL W T L Style STB-STBL Dimensions Blank T W L Number Price ea. 5/ 5/ 5/ 5/ 5/ 5/ - - - - - STB-4 STB-4L STB-48A STB-48B STB-48F STB-48C STB-48D STB-48E STB-48L STB-40A STB-40B STB-40 STB-4D STB-4A STB-4B STB-4C STB-4L STB-4A STB-4B STB-4C STB-4 STB-4L STB-40 STB-40L STB-44 STB-44L STB-4 STB-4L STB-L STB-8A STB-8 STB-8L STB-0A STB-0 STB-0L STB-A STB- STB-L STB-A STB- STB-L STB-0A 0.5.78.8.55 4.4.0 5.9.7.5 5.4 7. 4.55 4.4 5.84 8.7 7.0 4.4 5.5 5.84.49.84 45.8 8.8 5.7.9 7.84 45.4 90.8 4.57 8.59 7.07 4.5.8.07 4.7. 5.0 50.0... 0.9 C MEDIUM GRAIN CARBIDE -8% COBALT OTHER GRADES AVAILABLE UPON REQUEST MINIMUM GRIND STOCK TOLERANCES THICKNESS +0.008 WIDTH +0.0 LENGTH +0.008 PARALLEL AND FLAT WITHIN 0.00 ADDITIONAL QUANTITY DISCOUNTS AVAILABLE SEE PAGE 5 FOR CARBIDE DRILL BLANKS SHOP & TOOL SUPPLIES TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page 45

SHOP & TOOL SUPPLIES INDEXABLE INSERTS & DOVETAIL TOOL BLANkS Triangular High Speed Steel T5 Inserts DIMENSIONS PRICE Style ANSI PER Number Standard S T R PIECE 0074 TPG-.75.5.0.0 0085 TPG-4.500.88.047.74 009 TPG-544.5.50.0. Square High Speed Steel T5 Inserts DIMENSIONS PRICE Style ANSI PER Number Standard S T R PIECE 00 SPG-.75.5.0 0.0 0 SPG-4.500.5.0.84 0 SPG-.750.88.047 7.75 All sizes fit standard positive rake holders same as used for carbide inserts. Other radii available on application. Standard package quantity 0 pieces. Dovetail Form Tool Blanks (M4) Dovetail H W L A B C Form Style Price Per Style Tool +.05 +.05 +.05 Piece Number Holder -.000 -.000 ±.00 -.000 ±.00 ±.005-9/4.700 -DF- 4.57 5588-9/4.95 / -DF-.84 5599 - - 9/4.95 9/ -DF- 8.9 50-9/4.95 7/ -DF- 04.9 5-5/4.4 -DF- 7. 54 - - 5/4.4 7/ -DF-. 55-5/4.4 / -DF- 48.4 54 - - 5/4.88 --DF- 80.4 557 - - - 5/4.88 9/ --DF- 5.7 58 - - 5/4.88 9/ --DF- 50.0 579 - - 5/4.8 -DF- 55.5 590 - - 4/4.88 -DF- 59.00 5704 Dovetail Shave Tool Blanks (M4) Dovetail H W L A B C Shave Style Price Per Style Tool +.05 +.05 +.05 Piece Number Holder -.000 -.000 ±.00 -.000 ±.00 ±.005 - - /4.74 -DS- 4.8 575-7/4.9 / -DS- 40.5 57 - - 74.9 9/4 -DS- 5.89 577-7/4.9 5/4 -DS- 4.7 5748 - - 7/4.87 7/ -DS- 7.94 5759-7/4.87 /4 -DS- 8.99 5770 - - 7/4.554 / --DS- 88. 578 - -7/8 7/4.787 7/ --DS- 9.8 579 - - - -9/ 5/4.057 / -DS- 80.49 580 Page 4 TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97

CUTOFF WHEELS & SAFETY FLANGES DIAMETER WIDTH BORE PRICE 7 8 / / / / - - CALL FOR PRICING Hutchinson tool room cut off wheels are designed by toolmakers for toolmakers. These wheels are formulated for tool room applications where precise cutting is required. SHOP TOOLS & SUPPLIES REINFORCED CUTOFF WHEELS DIAMETER WIDTH BORE PRICE 0 / $9.90 CALL FOR / - " (w/bushing) $.80 PRICING Free cutting, long lasting, designed for applications where the workpiece is hand clamped or side pressure is evident. Center reinforced for reduced drag. TRU-GRIP TOOLMAkERS SAFETY FLANGES CONFORMS TO ANSI SAFETY CODE 5-- USES Mounting of thin Cut Off Wheels Mounting of thin Diamond Wheels Mounting of thin Grinding Wheels Mounting of thin Borazon Wheels Uniform Location For use with, 7, 8, 0 Diameter Wheels Only $7.50 / pair TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 FEATURES Protective Balance Positive Clamping Reduces Wheel Distortion Recessed to Safety Code Reinforced Composite Material for Strength and Safety Standard Arbor Hole Page 47

SHOP TOOLS & SUPPLIES 00% CONCENTRATION DIAMOND WHEELS AND TOOLS TYPE V9 FLARING CUP DIAMOND WHEELS D T U X PRICE IN. IN. IN. IN. EACH 4 / 99.00 5.00 5 4 7/ / 0.00 50.00 TYPE A STRAIGHT STYLE " DIAMOND WHEELS T X PRICE IN. IN. EACH 4.00 / 8.00 8.00 9.00 90.00 AVAILABLE IN GRIT SIZES 0-(FINE) 50-(MEDIUM) 00-(COARSE) 00% CONCENTRATION Specify (H) hole size AVAILABLE IN GRIT SIZES 0-(FINE) 50-(MEDIUM) 00-(COARSE) Specify (H) hole size TYPE AC CUP STYLE DIAMOND WHEELS WITH COUNTERSUNK BOLT HOLES D T W X PRICE IN. IN. IN. IN. EACH / 49.00 99.00 75% CONCENTRATION AVAILABLE IN GRIT SIZES 0-(FINE) 50-(MEDIUM) 00-(COARSE) Specify (H) hole size DIAMOND CUT-OFF WHEEL.05 Thickness 4 Hole Diamond Depth 00% Concentration GRIT D00 85.00 Each DIAMOND CLEANING STICK Aluminum Oxide 50 Grit x x.79 Each JIG GRINDING MANDRELS (D) Diameter.5.87.0.8..50.8..75 (H) Length.50.50.50.50.50.50.50.75.75 (L) Neck.500.500.500.500.500.500 Price Each.75.40.40.0.75 4.45 5.80 8.50.0 (D) Diameter.90.40.47.500.5.5.750.875.000 (H) Length.75.75.75.75.75.75.75.75.75 Price Each.00.5 9.5 4.5 48.0 50.0.75 7.5 88.90 +.0 -.00 " Shank 00 Grit " Overall Length Also Available: " or " Shank Diameters to.0 L H D Page 48 TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97

DIAMOND TOOLS Tool No. Style Cross Section Size (inches) NN- Oval.50 x.05 NN- Half-round.8 x.07 NN- Equaling.05 x.508 NN-4 Square.09 x.09 NN-5 Three Square.8 x.8 NN- Round.8 NN-7 Crossing.97 x.088 NN-8 Barretts.05 x.07 Diamond Plated Bore Laps Diamond Plated Needle Nose Files " Diamond length 5 " Overall length " shank Available in grit sizes: 00 FINE 50 MEDIUM 00 COARSE $4.90 each SHOP TOOLS & SUPPLIES Diameter Length of Diamond Price Each 4.9 7/ 5.70 9. 9/ 4. 5/ 44.89 / 48.0 5.7 / 5.8 7/ 59.59 5/ 9.8 77.9 9/ 84.79 9.4 / 05.5 4.45 7/8.4.8 STANDARD GRIT 0 OTHER GRITS AVAILABLE SCREW ADJUSTMENT EXPANDS DIAMETER CBN PLATED ALSO AVAILABLE SPECIFY BARREL OR BLIND HOLE LAP WHEN ORDERING NEEDLE EYE LAPS AVAILABLE TO.00 DIA - CALL FOR PRICING SINGLE END DIAMOND HAND HONE DOUBLE END DIAMOND HAND HONE L W T L X PRICE IN. IN. IN. IN. IN. EACH 4!/4!/4 7.50 4.5 AVAILABLE IN GRIT SIZES 00-(FINE) 0-(MEDIUM) 50-(COURSE) L W T L X PRICE IN. IN. IN. IN. IN. EACH 4!/4!/4 0.00 7.75 TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page 49

SHOP TOOLS & SUPPLIES Length Diameter / / 5/ 5/ 7/ 7/8 4 DOWEL PINS D P R STANDARD Point Crown height Nom.000 Oversized.00 Oversized Diameter or Radius Size Max. Min. Max. Min. Max. Min. Max. Min. /.08.0.0.04 0.058 0.048 0.00 0.008 /.094.099.0949.0947 0.089 0.079 0.0 0.0.5.5..59 0.0.0 0.04 0.0.878.87.88.884 0.80 0.79 0.0 0.0.50.50.5.509 0.40 0.0 0.08 0.0 5/.8...4 0.0 0.90 0.04 0.09.75.75.7.759 0.5 0.50 0.5 0.047 7/.478.47.48.484 0.44 0.409 0.4 0.055.500.500.50.5009 0.48 0.47 0.7 0.0.5.5..59 0. 0.595 0.08 0.078.750.750.75.7509 0.75 0.75 0.50 0.094 7/8.875.875.87.8759 0.80 0.840 0.9 0.09.000.000.00.0009 0.980 0.90 0. 0.5 Length Diameter 7/ 9/ 7/8 7/8 4 4 5 5 All pins are heat treated to Rockwell 0-4C.00 oversized ±.000 Prices on application Made in USA Dowel pins can be custom ground to special diameters to meet your requirements NO MINIMUM ORDER Call for current pricing Page 50 TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97

Page 5 TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 SHOP TOOLS & SUPPLIES NO MINIMUM ORDER CALL FOR CURRENT PRICING 0 STAINLESS DOWEL PINS Length 7/8 4 5/ METRIC PULL DOWEL PINS Length in MM 0 5 0 5 40 45 50 55 0 70 75 80 00 8 0 0 Length in MM 0 5 0 5 40 45 50 55 0 70 75 80 00 METRIC DOWEL PINS Length in MM 4 8 0 5 0 5 40 45 50 55 0 5 70 80 90 00 5 4 8 0 0 Length in MM 4 8 0 5 0 5 40 45 50 55 0 5 70 80 90 00 DOWEL PINS

SHOP TOOLS & SUPPLIES SOCkET HEAD CAP & SET SCREWS BUTTON HEAD SOCkET CAP SCREWS Length 4/40 / 8/ 0/4 0/ -0 5/-8 - Call for current pricing METRIC SOCkET HEAD CAP SCREWS Length M8 M0 0 5 0 5 40 45 50 55 0 5 70 75 FLAT HEAD SOCkET CAP SCREWS Length 4/40 5/40 / 8/ 0/4 0/ -0 5/-8 - - - -0 SOCkET SET SCREWS CUP POINT (OTHER POINTS AND DIAMETERS AVAILABLE PRICES ON APPLICATION) Length 0/80 /7 /5 8 4/40 5/40 / 8/ 0/4 0/ / / 5/ Length -0-8 5/-8 5/-4 - -4-5/ Page 5 TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97

SOCkET HEAD CAP SCREWS Length 0/80 /7 /5 8 4/40 5/40 / /40 8/ 8/ 0/4 0/ -0-8 7/8 SHOP TOOLS & SUPPLIES Length 5/-8 5/-4 - -4 7/-4 - -0 - -0-8 7/8 4 4 5 5 7 8 Also Available: Call for current pricing COMPLETE LINE OF HOLO-kROME FASTENERS CALL -800-544-794 TO REQUEST LATEST HOLO-kROME CATALOG TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page 5

SHOP TOOLS & SUPPLIES LIXIE HAMMERS AND MALLETS SOFT FACE DEAD BLOW Hammers, Mallets and Sledges with Replaceable Faces All Lixie Dead Blow striking tool head castings feature an unobstructed cavity, partially filled with iron shot. As the hammer is struck on a surface, the urethane face absorbs a portion of the blow s energy. The shot moves forward immediately behind the blow, dampening the rebound and insuring that the force of the blow is transmitted solidly to the struck surface. Lixie Dead Blow Hand Hammers and Mallets are available in sizes, with a selection of two weights in each size. The rugged head casting is of either malleable iron (Heavy Dead Blow) or hi-tensile, non-sparking Aluminum (Light Dead Blow). Lixie Dead Blow Sledges have the same features as the Hammers and Mallets. They are used where a heavy blow is desired, yet still retain the highly protective quality of Lixie urethane. They are available in sizes with weights in each size furnished with smooth hickory grip handles. See PAGe 55 For AvAilABle FAceS HEAD HEAD OVERALL WEIGHT PRICE MODEL DIAM. LENGTH LENGTH (OUNCES) EACH 00L-MH " 4-" " 0. HAMMERS & MALLETS 00H-MH " 4-" " 4. 5L-MH -" 4-7/8" " 4 40.07 5H-MH -" 4-7/8" " 9.74 50L-MH -" 5-" " 47.8 50H-MH -" 5-" " 0 47.40 00L-MH " -" 5" 8.0 00H-MH " -" 5" 5 5.05 50L-MH -" 7" 7".4 50H-MH -" 7" 7" 00 00. 00L-MH " 8-" 9" 57.4 LIXIE Dead Blow Sledge LIXIE Dead Blow Mallet SLEDGES 00H-MH " 8-" 9" 8 49. 50L-MH- -" 7-" " 80.5 50H-MH- -" 7-" " 4 59.44 00L-MH-5 " 8-" 5" 0 0. 00H-MH-5 " 8-" 5" 80 0.4 HAMMERS FURNISHED COMPLETE WITH FACES Grade of face may be interchanged without increase in cost. Where not specified standard face makeup of Medium and Hard (MH) will be furnished. All L-Light Dead Blow models are sparkproof. Page 54 TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97

LIXIE HAMMERS AND MALLETS MULTI HAMMER with Replaceable Urethane Face ONE HAMMER DOES THE JOB OF TWO! With a flip of the wrist you can switch from a sparkproof bronze to a soft, protective urethane face without fumbling for another hammer. Lixie s exclusive all-purpose model has a machinist s head cast in our special bronze alloy, with the opposite face incorporating replaceable screw-in faces in your choice of 4 grades, soft to hard. The handle is Grade A hickory with an exclusive non-slip grooved handle and special epoxy wedge construction. The All-Purpose hammer comes in a choice of sizes with face diameters of ", -" or -". SHOP TOOLS & SUPPLIES HEAD HEAD OVERALL WEIGHT PRICE MODEL DIAM. LENGTH LENGTH (OUNCES) EACH AB 00-T " -7/8" -" 4.0 AB 5-T -" 4-" " 5.88 AB 50-T -" 5" " 7.80 HAMMERS FURNISHED COMPLETE WITH URETHANE FACE Grade of face may be interchanged without increase in cost. Where not specified standard Tough grade (T) will be furnished. All are sparkproof. REPLACEABLE URETHANE SCREW-IN FACES Lixie screw-type replaceable polyurethane faces are included on all Lixie Dead Blow and Multi Hammers. They are available in six sizes, with a range of four hardnesses in each size. This permits custom fitting a Lixie hammer to your individual requirements. Impervious to oils and most solvents, these solid polyurethane faces have high impact absorption, yet will not mar, peen or deform the struck surface. DIAMETER COLOR " -" -" " -" " BROWN (Soft).9 7.9 9.8.7.4.40 GREEN (Medium).9 7.9 9.8.7.4.40 RED (Tough).9 7.9 9.8.7.4.40 BLACk (Hard) 9. 0..7 8.5.89 4.87 COLOR DENOTES HARDNESS NOTE: Order face diameter to coincide with hammer diameter. Faces packaged one each per container. To request full line brochure of Lixie Hammers Call -800-544-794 TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page 55

SHOP TOOLS & SUPPLIES STEEL SHIM STOCk Steel Shim Stock is low carbon mild steel cold rolled to a # hard temper. It is stiff and springy. The material can be punched or sheared with minimum burring and distortion. 008/00 Full Hard, AISI00, QQS 98 x 00 Rolls x 80 Rolls Assortments THICKNESS.00.005.00.005.00.004.005.00.007.008.009.00.0.05.08.00.05.0 PRICE EACH $.08 5.54 8.95 8.7. 0.94 0.00 9.5 9.9 9.89 0. 0.54 0. 0.7.9.0.4 4. THICKNESS.00.005.00.005.00.004.005.00.007.008.009.00.0.05.08.00.05.0 PRICE EACH $ 7.07.9 8.5 9.50.4.4 0.7 9.79 0. 0.48.4.8.9.0 5.7.09 7.8 9.4 Pak Pc. each x $ 9..00.005.00.00.004.005.00.007.008.00.0.05 5 Pak Pc. each x $ 45.8.00.005.00.00.004.005.00.007.008.00.0.05.00.05.0 4 Pak Pc. each x50 $ 4..00.00.00 BRASS SHIM STOCk Use Brass Shim Stock where some stiffness is required and where corrosion problems exsist. 70% copper and 0% zinc it has been cold rolled to a hard temper, Rockwell hardness of 0T. 0 Half Hard x 00 Rolls THICKNESS.00.005.00.00.004.005.00.007.008.009.00.0.05.00.05.0 PRICE EACH $.4.74.4 4. 5.5.4 7.8 8.5 0.08. 5.7 8.09 4.99 5.58. 7.89 THICKNESS.00.005.00.00.004.005.00.007.008.009.00.0.05.00.05.0 PRICE EACH $ 4.7 4.7 4.7 4.7 4.74 50.4 54.78.. 5.0 5.0 80.98 89.5 07.99 9.4 4.9 Pak Pc. each x $ 45.5.00.005.00.00.004.005.00.007.008.00.0.05 5 Pak Pc. each x $.5.00.005.00.00.004.005.00.007.008.00.0.05.00.05.0 4 Pak Pc. each x50 $ 50.8.00.00.00 Page 5 TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97

STAINLESS STEEL SHIM STOCk Stainless Steel Shim Stock can be used in any applications where corrosion is a concern, Available as follows: 00 Series Full Hard, R/C 40-45 0 Half Hard, R/C 0-5 0 Annealed Stainless Steel Metric 00 Series Full Hard, R/C 40-45 THICKNESS.0005.00.005.00.00.004.005.00.007.008.009.00.0.05.00.05.0 x 50 Rolls x 50 Rolls PRICE EACH $ 9.8. 0.5. 0.0 9.80.78.75.45.84.8 4.74 5.84 7.9. 8.89 44. THICKNESS.00.00.00.004.005.00.007.008.009.00.0.05.00.05.0 PRICE EACH $ 48.04 0.4 9. 8.50.79.74.77 4. 8.74 5.59 7. 40.4 4.40 55.55.8 THICKNESS.00.00.00.004.005.00.007.008.00.0.05.00.05.0 PRICE EACH $.4 4.9 4.4 4.47 4.5 5.7 54. 55.08 5.5 58.7 58.84 4.0 77.0 0. SHOP TOOLS & SUPPLIES Hard Stainless Shim R/C 0-5 AISI 0 Annealed Stainless Shim AISI 0 Metric Stainless 00 Series Full Hard, R/C 40-45 x 50 Rolls 50mm x.5m THICKNESS PRICE EACH THICKNESS PRICE EACH THICKNESS PRICE EACH.00.004.005.00.008.00.0.05.00.05 $ 87.94 94.4 95.4.47.4 4. 0. 4. 5.7 7.7.00.004.005.00.008.00.0.05.00.05 $ 87.94 94.4 95.4.47.4 4. 0. 4. 5.7 7.7.05 mm.0.5.0.5.0.40.50.5.80 $.5..8 5.0 5.94 7.09 9. 4.85 40.8 4.5 TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page 57

SHOP TOOLS & SUPPLIES AISI TYPE 0- OIL HARDENING GROUND FLAT STOCk Thickness Width /4 / /4 / - - - 4 - - - 4 - - - - 4 - - - - - 4 5 8 0 Price 9.0 9.7 4. 0.4 7.5 45. 7.00 00.08 9.40.87.79.5.48.9 4.0 55.74 5.7 85. 50.0 4.8 9.08. 7.0.50 9.9 48.4 5.50 4.8 88.54 0. 5.0 7.50 0.44.99.9 5.90 8.5. 4.0.74. 7.5 4.0 48.5 59. 70.07 05.05 9.8 Thickness Width 5/4 / 7/4 - - - 4 - - - - 4 5 8 0 - - - 4 5/ - - - - Overall Length: 8" Price.4.89 0.9.40.9. 9.5 4. 59.7 85.9 44. 4..4.89 0.9.40.9 9.97. 9.8 4.4 59.58 7.7 85.8 8.4 0.7. 0.5.9 7.9.0 9.7 49.7 54.85 70. 0.99 8.8 0..0.94.7 4..9 9.4.94 4.88 7.87 0.8.7 Thickness Width 9/4 5/ - 4 5 7 8 0 4 - - 4 5/ - - - - - 4 5 8 5/ - - - - Price 4. 48.58 54.49. 78.4 0.0.9 44.9 7.5 98.4. 8.4.08.5 8.7 5.50 49.05.0.74 40.00.. 9.87.49.90 0.44 4.0 7.7 44.84 5.09 59.0.50 80.94 95.0 4. 5.7 4.0 5.9.07 7.9 9.87.0 4.85 8.4.87 5.4 9. 4. 5.0 Thickness Width 7/ 9/ - 4 5 8 0 7/ - - - 4 5/ - - - - - 4 4-5 5-7 8 0 4 9/ - - Price 0.87 8.0 8.5 97.00 44.4 77.4 0.85 4.7.8 5.5 9.8.9 8.4 4.89 55.94 4. 8.9 5.9.04 5. 8.0 9.5.0.45 7. 0.84 4.74 8.7 4.9 50.04 57.70 5.8 7.0 80.70 88.5 9.0 07.88.45 54.7 89. 5.07 59.44.9.70 7.0.4 5.7 9.78 Page 58 Tolerance: Thickness ±.00 Width +.005.0 Also Available: " Lengths Oversize Low Carbon A-, D-, S-7 TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97

AISI TYPE 0- OIL HARDENING GROUND FLAT STOCk Thickness Width 9/ 5/ 7/ 4 5/ - - - - - 4 5 7 8 0 - - - - - 4 4-5 5-7 8 0 7/ Price 48.4 5.85 8.9 7.84 4.9.9.5 5.8 8.04.59.9 4.5 45.7 50.7 59.0 8.9 77. 8. 04..94 0.4 8.49.79 4..4 8.7.44 4.9 9.0 44.0 50.0 57.4 0.99 7.8 8.75 9.7 04.54 5.4. 7.4 48.09 94.9 9.4 9.4 9.5 7.8 4.9 40.5 4.8 Thickness Width 7/ 9/ - - - 4 - - - - - 4 4-5 7 8 0 9/ - - - - - - 4 5 - - - Overall Length: 8" Price 5.7 59.0 7.4 84. 9.9 9. 7.9 5. 8.55 4.84 48.9 54.74.7 8.0 74.45 87.0 00.7.90 7.08 40.4 54.9 9. 9. 70.09 5. 79.58 4. 47.7 55.0. 9.4 84.0 4.9 50.00 57.5 4.84 7.9 87.50 0.59 7.7.85 47.95 79.5 09.7 59.44 8.9 7. 85.4 94. Thickness Width 7/8 - - - - - 4 4-5 8 0 7/8 - - 4 - - - - - 4 5 8 0 - - 4 - - - 4 5 - Price 0.0 0.59 8. 55.8 7.4 9.04 09.4 44.8 58.9 4.00 505.8 74.48 79.5 88.9 98.9 8.87 58.94 98.94 79.95 85.50 95. 05.84..8 47.8 8.7 89.7 0.74 5.9 95.7 4. 50.4 09.4 09.0.9 50.99 99.00 47.07 44. 0.8.4 59.8 85..9.08.0 7.9 55.59 Thickness Width - - 4 5 8 4 - Tolerance: Thickness ±.00 Width +.005.0 Also Available: " Lengths Oversize Low Carbon A-, D-, S-7 Price 85.4 5. 57.0 0.8 49.7 594.79 7.44.9 87. 55.50 408.9 SHOP TOOLS & SUPPLIES TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page 59

SHOP TOOLS & SUPPLIES SOLID CARBIDE PLAIN PRESS FIT BUSHINGS Std. Drill Size A.05 to.05.05 to.0995.0980 to.40.50 to.95.875 to.570.875 to.0.5 to.475.750 to.5.5000 to.50.50 to.7500.7500 to.0000 Actual O.D. B.578.575.04.04.5.5.4.8.4078.4075.507.504.7.4.758.755.878.875.008.005.77.78 Length C 5/ 5/ 5/ 5/ 5/ - - - - - - - - - - - - - - - - - - - - Symbol for O.D. Finish Ground PC-0-4 PC-0-5 PC-0- PC-0-8 PC--4 PC--5 PC-- PC--8 PC--4 PC--5 PC-- PC--8 PC-- PC-0-4 PC-0-5 PC-0- PC-0-8 PC-0- PC-0- PC--4 PC--5 PC-- PC--8 PC-- PC-- PC-- PC-- PC--8 PC-- PC-- PC-- PC--8 PC-40- PC-40-8 PC-40- PC-40- PC-40- PC-40-8 PC-40-4 PC-48-8 PC-48- PC-48- PC-48- PC-48-8 PC-48-4 PC-5-8 PC-5- PC-5- PC-5- PC-5-8 PC-5-4 PC-4-8 PC-4- PC-4- PC-4- PC-4-8 PC-4-4 PC-4-40 PC-88- PC-88- PC-88- PC-88-8 PC-88-4 PC-88-40 SOLID CARBIDE SLIP & FIXED RENEWABLE BUSHINGS ALSO AVAILABLE PRICES UPON REQUEST STANDARD I.D. TOLERANCES Up to Nominal +.000/+.0004 Over to Nominal +.000/+.0005 Over to - Nominal +.000/+.000 Over - to - Nominal +.000/+.0007 Counterbore Unless otherwise specified, all Carbide Bushings are supplied without counterbore. (Carbide Bushings with counterbore are priced as specials.) AVAILABLE IN DRILL SIZES UP TO.750 PRICES ON REQUEST Page 0 TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97

Std. Drill Size A.05 to.05.05 to.0995.0980 to.40.50 to.95.875 to.570.875 to.0.5 to.475.750 to.5.5000 to.50.50 to.7500.7500 to.0000 Actual O.D. B.578.575.04.04.5.5.4.8.4078.4075.507.504.7.4.758.755.878.875.008.005.77.78 CARBIDE HEAD PRESS FIT BUSHINGS Length C 5/ 5/ 5/ 5/ 5/ - - - - - - - - - - - - - - - - - - - - Symbol HEAD for O.D. DIMENSIONS Finish Ground F G HC-0-4 HC-0-5 HC-0- HC-0-8 HC--4 HC--5 HC-- HC--8 HC--4 HC--5 HC-- HC--8 HC-- HC-0-4 HC-0-5 HC-0- HC-0-8 HC-0- HC-0- HC--4 HC--5 HC-- HC--8 HC-- HC-- HC-- HC-- HC--8 HC-- HC-- HC-- HC--8 HC-40- HC-40-8 HC-40- HC-40- HC-40- HC-40-8 HC-40-4 HC-48-8 HC-48- HC-48- HC-48- HC-48-8 HC-48-4 HC-5-8 HC-5- HC-5- HC-5- HC-5-8 HC-5-4 HC-4-8 HC-4- HC-4- HC-4- HC-4-8 HC-4-4 HC-4-40 HC-88- HC-88- HC-88- HC-88-8 HC-88-4 HC-88-40 9/4 /4 7/4 9/4 5/4 59/4-7/4-5/4-9/4 / / / 5/ 7/ 7/ 7/ 5/ SOLID CARBIDE SLIP & FIXED RENEWABLE BUSHINGS ALSO AVAILABLE PRICES UPON REQUEST STANDARD I.D. TOLERANCES Up to Nominal +.000/+.0004 Over to Nominal +.000/+.0005 Over to - Nominal +.000/+.000 Over - to - Nominal +.000/+.0007 AVAILABLE IN DRILL SIZES UP TO.750 PRICES ON REQUEST SHOP TOOLS & SUPPLIES TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page

SHOP TOOLS & SUPPLIES Thickness.00.005.00.005.00.004.005.00.007.008.009.00.0.0.0.04.05.0.07.08.09.00.0.0.0.04.05.0.07.08.09.00.0.0.0.04.05.0.07.08 Strips x $4.7.50.50.5.50.0.0.0.79.79.79.79.79.79.79.79.79.79.79.79.79.79.79.79.79.79.79.79.79.79.79.79.9.9.9.9.9... STEEL FEELER GAGE STOCk Coils x 5 $9.4 49.9 49.9 5. 49.9 40.4.57.57................... 5.84 5.84 5.84 5.84 5.84 8.40 8.40 8.40 8.40 8.40 4.0 4.0 4.0 Thickness.09.040.04-.045.04-.055.05-.05.0-.075.07-.090.09-.5 Strips x.. 8.57 9.9 0.00 0. 0.7.4 TOLERANCE FOR.00 & LARGER = + -.0005 FOR.09 & SMALLER SEE PAGE Steel gage stock is made from fine quality 095 tempered spring steel and etched every six inches for positive identification. Coils x 5 4.0 4.0 AVAILABLE IN.00 INCREMENTS NOT AVAILABLE IN COIL Available in wide (.7 MM) twelve inch (00 MM) lengths or 5 (7. M) rolls Additional sizes and materials available. Call for pricing and delivery. Metric - Steel Thickness Strips Coils.7mm x 00 mm.7mm x 7.m.04mm $ 4.4 $ 99.99.05 4.9 9.8.0.9 85.7.07.57 78.57.08.57 78.57.09.5 7.4.0.5 7.4.5. 7.8.0. 7.8.5. 7.8.0. 7.8.5. 7.8.40. 7.8.45. 7.8.50. 7.8.55.9 9.9.0.9 9.9.5.9 9.9.70.8 9.9.75.9 9.9.80. 7.4.85. 7.4.90. 7.4.95. 7.4.00. 7.4.50 0.7.00.4.50.4.00.4 Page TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97

STAINLESS STEEL GAGE STOCK IS TYPE 0 EXTRA FULL HARD OR HIGH YIELD, WITH A # ROUND EDGE. LIKE THE STEEL STOCK IT IS ETCHED EVERY SIX INCHES FOR POSITIVE IDENTIFICATION. AVAILABLE IN AND WIDTHS, TWELVE INCH LENGTHS OR 5 ROLLS. SPECIAL LENGTHS, WIDTHS AND THICKNESS ON REQUEST. STAINLESS STEEL FEELER GAGE STOCk STRIPS COILS STRIPS COILS TOLERANCE Thickness x x 5 x x 5 +/-.0005 $7.7 $54. $5.4 $.4.00005.00.08.. 4..000.005 4. 0.75 8.4 8.57.000.00.4 7.8 7.8 45.7.000.005 4.4 9.7 9.7 85.4.000.00.4 7.8 7.8 45.7.0000.004.78 55. 5.5 0..0000.005.78 49.79 5.5 99.57.0004.00.78 49.79 5.5 99.57.0008.007.78 49.79 5.5 99.57.0008.008.78 49.79 5.5 99.57.000.009.78 49.79 5.5 99.57.000.00.78 49.79 5.5 99.57.0005.0.0 54..0 08.5.0005.0.0 54..0 08.5.0005.0.0 54..0 08.5.0004.04.0 54..0 08.5.0004.05.0 54..0 08.5.0004.0..7.00047.07..7.00047.08..7.00047.09..7.00047.00..7.0.87 9.59.0.87 9.59.0.87 9.59.04.87 9.59.05.87 9.59.0.87 9.59 Not Available in Coils.00050.00050.00050.00050.00050.00050.00050 SHOP TOOLS & SUPPLIES TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page

INSPECTION & GAGING INSPECTION BALL kits GRADE 5 CHROME STEEL (R/C 0 MIN.) Part # Nominal Size Price 4 Sizes From BK-4 / - Kit $49.07 09-BK /.8 mm 4.8 5-BK.75 mm 4.8 5-BK 5/.99 mm 4.8 87-BK 4.7 mm 4.8 8-BK 7/ 5.55 mm 4.8 50-BK.5 mm 4.8 -BK 5/ 7.98 mm 44.50 75-BK 9.55 mm 44.50 47-BK 7/. mm 44.50 500-BK.7 mm 4. 5-BK 5.875 mm 4. 750-BK 9.05 mm 5.04 875-BK 7/8.5 mm.0 Inspection ball kits are available from stock in the 4 most popular English sizes from / to.00, individually or all in a kit. The kit for each individual size contains 7 balls. A nominal fractional ball as well as one each of a +.00, +00, +0005, +000, and -.00, -00. Kit BK-4 consists of all 4 individual size kits. The inspection ball kits are also excellent for ball sizing parts. Ball sizing is basically pushing a ball through a hole or tube which produces a certain finish or size. Grade 5 BASIC DIAMETER TOLERANCE = + -.000 DEVIATION FROM SPHERICAL FORM.00005 DECIMAL DIAMETER BALLS, OTHER MATERIALS AND TOLERANCES AVAILABLE CALL FOR PRICING & DELIVERY Page 4 TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97

CLASS X MEYER GAGE MG-5 SERIES INSPECTION & GAGING MG-5 PIN GAGE SETS IN.000 INCREMENTS OR.0mm INCREMENTS Used as masters to calibrate measuring equipment and check linearity of comparators, micrometers, and calipers. These Tenth Step gage sets have unlimited applications, such as quality control inspection, prototype work and production layout. Inspectors select from the range of pins to find the size of a hole or slot. These round masters simulate a cylindrical part which unlike flat blocks can detect uneven wear on the tips of micrometers and calipers. The thin line of contact detects uneven face wear better than flat gage blocks with large contact area. SEE PAGE 7 FOR MORE CLASS X GAGE SETS FEATURES: Each set contains 5 pieces of Class X tolerance (.00004 ) gage pins. Traceable to NIST. Choice of two tolerances Plus (+.00004 ) or Minus (-.00004 ). Sets consist of a center nominal size, and gages larger in.000 steps and gages smaller in.000 steps. Each gage is inspected and has a micro-finish or better. Heat treated and through hardened to 0- Rockwell C. All pin gages over.00 or.5mm are laser marked with size direction of tolerance and serial number for traceability. GAGE SET NO. NOMINAL SIZE RANGE SET PRICE English or Metric MG-5.00 to.009.8mm to.54mm $40.09 MG-5.00 to.509.55mm to.7mm $9.9 MG-5.50 to.5009.8mm to.7mm $95.05 MG4-5.500 to.7499.7mm to 9.04mm $9.7 MG5-5.7500 to.89 9.05mm to 0.4mm $7.8 To order simply select your nominal size from any.000 English or.0mm Metric increment and direction of tolerance. Then refer to the above chart to find the set price. TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page 5

INSPECTION & GAGING PRECISION PLUG GAGE SETS Separate Gage No. of Member Set Number Gage Size Members Price Price WTH-0.0 -.00 50 8.8.7 WTH-0-5.05 -.005 50 8.8.7 WTH-.0 -.50 90 84.09. WTH--5.05 -.505 90 84.09. WTH-0.0 -.50 40 5.7 WTH-05.05 -.505 40 5.7 WTH-.5 -.500 50 7.7. WTH--5.55 -.5005 50 7.7. WTH-.50 -.5 5 0.4 4. WTH--5.505 -.55 5 0. 4. WTH-4. -.750 5 54.54.70 WTH-4-5.5 -.7505 5 54.54.70 WTH-5.75 -.8 8 0. 0.05 WTH-5-5.755 -.85 8 0. 0.05 WTH-.8 -.9 84 70.50.49 WTH--5.85 -.95 84 70.50.49 WTH-7.97 -.000 84 75.9.88 WTH-7-5.975 -.0005 84 75.9.88 IMPORTANT: SPECIFY PLUS OR MINUS TOLERANCE WHEN ORDERING GAGES PLASTIC CASES EACH HOLE SIZE MARKED ON INSERT. Plastic insert for WTH-0 set... $.5 each Plastic insert for WTH- thru WTH-8 sets....0 each Plastic case for WTH-0 set....5 each Plastic case for WTH- thru WTH-7 sets....0 each Plastic case with insert for WTH-0 set....0 each Plastic case with insert for WTH- thru WTH-7 sets.... each USES Checking locations. Measuring hole sizes and depths Go and No-Go gaging. Setting micrometers. Checking distances between holes. Page IN.00 INCREMENTS WTH-0 mm.mm -.50mm 5 0.7 4. WTH-0 mm.mm -.5mm 5 0.7 4. WTH- mm.5mm - 7.70mm 0 74.99 4.9 WTH- mm.5mm - 7.7mm 0 74.99 4.9 WTH- mm 7.7mm -.70mm 50 40. 4.9 WTH- mm 7.7mm -.7mm 50 40. 4.9 WTH- mm.7mm - 5.0mm 0 447.7 5.8 WTH- mm.7mm - 5.mm 0 447.7 5.8 WTH-4 mm 5.mm - 7.80mm 5 474.54 8.8 WTH-4 mm 5.mm - 7.8mm 5 474.54 8.8 WTH-5 mm 7.8mm - 0.mm 8 5.5 9.95 WTH-5 mm 7.8mm - 0.7mm 8 5.5 9.95 WTH- mm 0.8mm -.04mm 84 74.4.5 WTH- mm 0.9mm -.05mm 84 74.4.5 WTH-7 mm.0mm -.7mm 84 778.79.05 WTH-7 mm.07mm -.7mm 84 778.79.05 WTH-8 mm.74mm - 5.40mm 84 800.9 4.8 WTH-8 mm.75mm - 5.4mm 84 800.9 4.8 IN.0mm INCREMENTS TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97 METRIC GAGE SETS Separate Gage No. of Member Set Number Gage Size Members Price Price FEATURES All Gages " long No sharp edges Boxes and Gages both marked (WTH-0 pins not etched) 8 Micro finish or better All english gages are inspected within.000 tolerance limits All metric gages are inspected within.005mm tolerance limits Heat treated to a hardness of Rockwell C 0- Each set packaged in its own plastic case

PRECISION PLUG GAGE SETS CLASS X GAGE SETS.00 INCREMENTS Separate Gage Number of Member Set Range Members Price Price WTH-OX.0 -.00 50 445.40.4 WTH-O5X.05 -.005 50 445.40.4 WTH-X.0 -.50 90 70.4.4 WTH-5X.05 -.505 90 70.4.4 WTH-X.5 -.500 50 548.8.45 WTH-5X.55 -.5005 50 548.8.45 WTH-X.50 -.5 5 4.7 9. WTH-5.505 -.55 5 4.7 9. WTH-4X. -.750 5 9. 9. WTH-45.5 -.7505 5 9. 9. WTH-5X\.75 -.8 8 70..70 WTH-55X.755 -. 85 8 70..70 WTH-X.8 -.9 84.59.70 WTH-5X.85 -.95 84.59.70 WTH-7X.97 -.000 84 4..70 WTH-75X.975 -.0005 84 4..70 INSPECTION & GAGING.000040 tolerance Each set packaged in Plastic Case and Insert. GAGE SET LIBRARIES: Conveniently store all your gages in one location IMPORTANT! Specify plus or minus tolerance when ordering gages.000 (CLASS Z) LIBRARY SERIES Model Number Wt./lbs. Range Number of members Price L-S 87.0 -.5 (5 gages),0.78 L-C 0.0 -.750 (740 gages),479.9 L- 0.0 -.750 (90 gages),4.05 L- 95.0 -.5005 (880 gages in.0005 increments),98.95 L-C 9.0 -.5005 (980 gages in.0005 increments),.7 L- 40.0 -.000 (940 gages),0.9 L-4 40.0 -.000 (990 gages),9.0 L-5 40.75 -.000 (50 gages),5.4.00004 (CLASS X) LIBRARY SERIES Model Number Wt./lbs. Range Number of members Price L-CX 0.0 -.750 (740 gages) 5,804.50 L-X.0 -.750 (90 gages) 5,8.9 L-X 98.0 -.5005 (880 gages in.0005 increments),049.8 L-CX 00.0 -.5005 (980 gages in.0005 increments) 5,9. L-X 0.0 -.000 (940 gages) 9,09.79 L-4X 50.0 -.000 (990 gages) 9,45.44 Consists of one seven drawer cabinet. METRIC LIBRARY SERIES (.005mm) Model Number Wt./lbs. Range Number of members Price L-0 mm 4.5mm - 7.80mm (85 gages),877.8 L- mm 4.5mm - 7.8mm (85 gages),877.8 L-0 mm 8 7.8mm - 5.40mm (80 gages),970. L- mm 8 7.8mm - 5.4mm (80 gages),970. L-0 mm 05.5mm - 5.40mm (95 gages) 4,847.77 L- mm 05.5mm - 5.4mm (95 gages) 4,847.77 Consists of four drawer cabinets Upgrade Existing Sets L-E 4 8 four drawer cabinet empty 54.0 L-IN 4 4 four drawer cabinet with four inserts of your choice 44.88 TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page 7

INSPECTION & GAGING Hutchinson HSS gages are an ideal low cost solution to a variety of dimensioning problems. All gage members are made of M high speed steel hardness C -4. REVERSIBLE PLUG GAGES YOUR CHOICE OF THREE TOLERANCES +.000 +.0000 +.000 -.0000 -.000 -.000.000-.0049... 4.50.07 MM -. MM.0050-.009....50.7 MM -.7 MM.0070-.0099....50.77 MM -.5 MM.000-.000... 4.0.54 MM -.508 MM.00-.0....8.5 MM -.79 MM.0-.098....5.795 MM -.8 MM.099 -.50....54.85MM -.75 MM.5 -.875... 4.57.78 MM - 4.7 MM.87 -.500... 4.98 4.75 MM -.50 MM LONG HSS GAGE MEMBER PRICES.50-.5... 5.4.5 MM - 7.98 MM. -.750... 5.7 7.940 MM - 9.55 MM.75-.5000....45 9.58. MM -.700 MM.500 -.55... 7.9.70-4.88 MM.5 -.50... 8. 4.90 MM - 5.875 MM.5 -.875... 9. 5.878 MM - 7.4 MM.87 -.7500... 0. 7.45 MM - 9.050 MM.750 -.85.... 9.05 MM - 0.8 MM.8 -.8750....4 0.40 MM -.5 MM.875 -.975... 4.49.8 MM -.8 MM.97-.0000... 5.8.85 MM - 5.400 MM.000-.05... 9.54 5.40 MM -.988 MM.0-.50.....77.990 MM - 0. MM.5 -.500... 5.89 0.5 MM -.750 MM.50 -.5... 7..75 MM -.8 MM. -.750... 0.0.40 MM - 4.95 MM.75 -.475....7 4.98 MM -.5 MM.47 -.5000... 7.08.55 MM - 8.00 MM Standard Plug Gage Classes For Product Tolerances Normal practice for product gage tolerance is to allow 0% of the product to be equally divided between go and no-go. In the case of plug gages, go is normally a plus tolerance and no-go is normally a minus tolerance. Standard Gagemakers Tolerance Chart Size Range To and Above including CLASS CLASS CLASS CLASS CLASS CLASS XXXX XXX XX X Y Z.0009 -.00.000005.0000.0000.00004.00007.0000.00 -.09.000005.0000.0000.00004.00007.0000.09 -.85.000005.0000.0000.00004.00007.0000.85 -.50.000008.00005.0000.0000.00009.000.50 -.50.0000.0000.00004.00008.000.000.50-4.50.0000.00005.00005.0000.0005.0000 4.50 -.50.00007.0000.00005.000.0009.0005.50-9.00.0000.00004.00008.000.0004.000 9.00 -.0.00005.00005.0000.0000.0000.00040 PLEASE USE THIS CHART FOR GAGES ON THE FOLLOWING PAGES Single or Double End Handles for above gages Handle Size Price Number Range Each W.000 -.075 7.85 W.075 -.80 8.0 W.80 -.8 9.0 4W.8 -.40.50 5W.40 -.50.80 W.50 -.5 7.0 7W.5 -.70 9.85 8W.70 -.00 9.0 All handles supplied complete with bushings. Page 8 TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97

TRILOCkS - STEEL AND CHROME SIZE RANGE STD GO MEMBER ONLY STD NO GO MEMBER ONLY HANDLE Above - Through CLASS Length Steel Chrome Length Steel Chrome No. Price XX 8.5 7.0 in. 75.57 5.4.70 IN -.947 IN X / 4 IN 70.7 4.4 9.MM 5.0 0.04 9.0 MM - 4.05 MM Y.8 MM 0.7.4 55.8.4 0.07 Z 50.4 00.9 47.45 94.90 XX 84.77 9.54 in. 7.40 5.80.947 IN -.5 IN X / 8 IN 7. 45. 9. MM.44.88 4.05 MM - 8.8 MM Y 4.9 MM.5 4.70 57.07 4.4.8 Z 5.8 07. 50.4 00.9 XX 9.04 8.08 IN. 8.7.4.5 IN -..50 IN X / IN. 79.4 58.84 9. MM 7.4 44.9 8.8 MM - 8.5 MM Y 8. MM 5.8.7 0.08 0. 4.8 Z 55.8.4 5.80 0.0 XX 4.4 9.8.00 44.00.50 IN -.00 IN X 7 / 8 IN.80 7.0 7/8 IN 99.4 98.48 5 5.7 8.5 MM - 5.05 MM Y 47.8 MM 0.5 04.50. MM 89.7 78.4 Z 8.4.8 77.99 55.98 XX.. 47.0 94.0.00 IN -.50 IN X IN 4.4 9.8 7/8 IN.00 44.00.4 5.05 MM -.75 MM Y 50.8 MM 9.5 8.0. MM 04.8 08. Z 00.7 00.4 88.70 77.40 XX 8.45.90.5.50.50 IN -.00 IN X IN 5.40.80 IN 0.79.58 7.07.75 MM - 7.45 MM Y 50.8 MM 4.4 9.8 5.4MM 7.4 4.48 Z.55.0 0.00 0.00 XX 4.0 448.0 9. 8.4.00 IN -.50 IN X IN 7.9 4.58 IN 59.4 8.8 7.07 7.45 MM - 89.5 MM Y 50.8 MM 59.9 9.8 5.4 MM 9.57 79.4 Z 7.0 74. 0. 40. XX.50 IN - 4.00 IN X / 8 IN IN 7.07 89.5 MM - 0.85 MM Y 54.0 MM 5.4 MM Z XX 4.00 IN - 4.50 IN X / 8 IN IN 7.07 0.85 MM - 4.55 MM Y 50.8 MM 5.4 MM Z XX 4.50 IN - 5.00 IN X / 8 IN IN 7.07 4.55MM - 7.5 MM Y 54.0 MM 5.4 MM Z Prices Prices XX 5.00 IN - 5.50 IN X / 8 IN on IN on 7.07 7.5 MM - 9.95 MM Y 54.0 MM 5.4 MM Application Z Application XX 5.50 IN -.00 IN X / 8 IN IN 7.07 9.95 MM - 5.5 MM Y 54.0 MM 5.4 MM Z XX.00 IN -.50 IN X / 8 IN IN 7.07 5.5 MM - 5.5 MM Y 54.0 MM 5.4 MM Z XX.50 IN - 7.00 IN X / 8 IN IN 7.07 5.5MM - 78.05MM Y 54.0 MM 5.4 MM Z INSPECTION & GAGING Additional sizes available through 8.00 in. See page 74 for Progressive Trilocks Trilocks are also available in Carbide. Call for pricing and delivery TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page 9

INSPECTION & GAGING REVERSIBLE PLUG GAGES Size / Range Tolerance Reversible Go or No Go AGD Handle Class Member in single or double end Above To and inches Including Length Steel Carbide No. Price XX.0000 47.00.0 IN -.00 IN X.00004 IN 9.00 W 7.85.79 MM -.508 MM Y.00007 50.8 MM.00 Z.0000.00 XX.0000 44.00.00 IN -.00 IN X.00004 IN.00 W 7.85.508 MM -.7 MM Y.00007 50.8 MM.00 Z.0000 9.00 XX.0000 4.00.00 IN -.040 IN X.00004 IN 9.00 W 7.85.7 MM -.0 MM Y.00007 50.8 MM 7.00 Z.0000 4.00 XX.0000 4.00 85.00.040 IN -.075 IN X.00004 IN 9.00 80.5 W 7.85.0 MM -.9 MM Y.00007 50.8 MM 7.00 75.0 Z.0000 4.00 70.40 XX.0000 7.00 85.00.075 IN -. IN X.00004 IN.00 80.5 W 8.0.9 MM -.9 MM Y.00007 50.8 MM.00 75.0 Z.0000 7.00 70.40 XX.0000 7.00 54.5. IN -.0 IN X.00004 IN.00 5.00 W 8.0.9 MM -.0 MM Y.00007 50.8 MM.00 47.5 Z.0000 7.00 44.95 XX.0000 7.00 57.05.0 IN -.80 IN X.00004 IN.00 5.40 W 8.0.0 MM - 4.57 MM Y.00007 50.8 MM.00 49.80 Z.0000 7.00 47.5 XX.0000 8.00 0.70.80 IN -.0 IN X.00004 IN.00 57.05 W 9.0 4.57 MM - 5.84 MM Y.00007 50.8 MM.00 5.40 Z.0000 8.00 49.80 XX.0000 8.00 9.0.0 IN -.8 IN X.00004 IN.00 5.55 W 9.0 5.84 MM - 7.4 MM Y.00007 50.8 MM.00.90 Z.0000 8.00 58.5 XX.0000.00 7.5.8 IN -.44 IN X.00004 IN.00.75 4 W.50 7.4 MM - 8.74 MM Y.00007 50.8 MM.00.5 Z.0000 8.00 59.50 XX.0000.00 78.90.44 IN -.40 IN X.00004 IN.00 75.5 4 W.50 8.74 MM - 0. MM Y.00007 50.8 MM.00 7.85 Z.0000 8.00 70.40 XX.0000.00 85.00.40 IN -.40 IN X.00004 IN 7.00 8.5 5 W.80 0. MM -.8 MM Y.00007 50.8 MM 4.00 77.70 Z.0000 0.00 74.05 XX.0000 9.00 88.5.40 IN -.50 IN X.00004 IN 7.00 85.00 5 W.80.8 MM -.95 MM Y.00007 50.8 MM 4.00 8.5 Z.0000 0.00 77.70 Page 70 TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97

REVERSIBLE PLUG GAGES Size / Range Tolerance Reversible Go or No Go AGD Handle Class in Member single or double end Above To and inches Length Including Steel Carbide No. Price XX.0000 9.00 7.50.50 IN -.50 IN X.00004 IN 9.00.0 W 7.0.95 MM - 4. MM Y.00007 50.8 MM.00 7.75 Z.0000.00.90 XX.0000 9.00 9.0.50 IN -.5 IN X.00004 IN 9.00.55 W 7.0 4. MM -. MM Y.00007 50.8 MM.00 8.70 Z.0000.00.85 INSPECTION & GAGING XX.0000 9.00 50.55.5 IN -.700 IN X.00004 IN.00 44.45 7 W 9.85. MM - 7.78 MM Y.00007 50.8 MM 8.00 8.40 Z.0000.00.5 XX.0000 48.00 8.95.700 IN -.70 IN X.00004 IN.00 79.70 7 W 9.85 7.78 MM - 9.0 MM Y.00007 50.8 MM 8.00 7.40 Z.0000 4.00 5.0 XX.0000 48.00.70 IN -.85 IN X.00004 IN.00 8 W 9.0 9.0 MM - 0.95 MM Y.00007 50.8 MM 8.00 Z.0000 4.00 XX.0000 5.00.85 IN -.000 IN X.0000 IN 47.00 8 W 9.0 0.95 MM - 5.40 MM Y.00009 50.8 MM 4.00 Z.000 8.00 Go gages supplied with plus tolerance No go gages supplied with minus tolerance Bi-lateral (Split) tolerances also available at above listed prices Extra long gages in steel and chrome are available up to in (5.4mm) for diameters above.075 Quantity discounts available - Call for quotation Certification of calibration available for additional charge All handles supplied complete with bushings For larger gauges - see trilocks on page 9. For class X gauges up to long - see page 74. TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page 7

INSPECTION & GAGING RING GAGES Size / Range Tolerance Standard A.G.D Class Price Each To and in Blank size Above Including inches Length O.D. Steel Chrome Carbide XX.0000 BLANK #000.05 IN -.040 IN X.00004 PRICES 5 IN IN 0.8 MM -.0 MM Y.00007.7 MM.8 MM ON Z.0000 APPLICATION XX.0000 BLANK #00.07 7.4.040 IN -.00 IN X.00004 IN 5 IN 89.97 0.5.0 MM -.54 MM Y.00007 4.8 MM.8 MM 8.8 9.8 Z.0000 8.8 9.8 XX.0000 BLANK #00 8.55 0.59.00 IN -.50 IN X.00004 IN 5 IN 5.9 75.9.54 MM -.8 MM Y.00007 4.8 MM.8 MM 4.84 45.7 Z.0000 4.84 45.7 XX.0000 BLANK #00 59..45 78.7.50 IN -.85 IN X.00004 IN 5 IN 4.5 0. 50.85.8 MM - 4.70 MM Y.00007 4.8 MM.8 MM 7.9 78.7.97 Z.0000 7.9 78.7.97 XX.0000 BLANK #0 5.0.8 70.0.85 IN -.0 IN X.00004 8 IN 5 IN.8 9.5 8. 4.70 MM - 5.84 MM Y.00007 9.5 MM.8 MM.0 70.5 4.54 Z.0000.0 70.5 4.54 XX.0000 BLANK # 44.7 0.8.7.0 IN -.5 IN X.00004 9 IN 8 IN 0.0 8.4.44 5.84 MM - 9.7 MM Y.00007 4. MM 8. MM 5.8.4 08.08 Z.0000 5.8.4 08.08 XX.0000 BLANK # 7.87 9.0 55.0.5 IN -.50 IN X.00004 4 IN 8 IN 4.09 7.7 9.57 9.7 MM -.95 MM Y.00007 9. MM 4.9 MM 0.0 54.4 04.05 Z.0000 0.0 54.4 04.05 XX.0000 BLANK # 44.7 0.8.59.50 IN -.85 IN X.00004 5 4 IN 0.0 8.4 98.4.95 MM - 0.95 MM Y.00007.8 MM 44.4MM 5.8.4 5.8 Z.0000 5.8.4 5.8 XX.0000 BLANK # 4 5.0.8 4.0.85 IN -.5 IN X.0000 8 IN 8 IN.8 9.5 87.9 0.95 MM - 8.8 MM Y.00009 8. MM 54.0 MM.0 70.5 44.85 Z.000.0 70.5 44.85 Choice of three tolerances: Go - Unilateral minus No Go - Unilateral plus Master - Bilateral (split) Carbide rings have tungsten carbide inserts and steel jackets All ring gages are lapped to size and polished Roundness and taper of all gages will not exceed 50% of the applicable gagemakers size tolerance and are non-accumulative. Also Available: Aluminum Ring Gage Holders SEE PAGE 7 Page 7 TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97

RING GAGES Size / Range Tolerance Standard A.G.D Class Price Each To and in Blank size Above Including inches Length O.D. Steel Chrome Carbide XX.00004 BLANK # 5 90.0 44.74 58.94.5 IN -.50 IN X.0000 5 IN IN 7.00 0. 5.74 8.8 MM - 8.5 MM Y.00009.MM.5 MM 5.0 9.8 45.5 Z.000 5.0 9.8 45.5 INSPECTION & GAGING XX.00004 BLANK # 8.5 8.45 785..50 IN -.00 IN X.00008 IN 4 IN 9. 5.0 707.0 8.5 MM - 5.05 MM Y.000 8. MM 0.MM 74.8 5.5 8.49 Z.000 74.8 5.5 8.49 XX.00004 BLANK #7 57.84 5.80 0.0.00 IN -.50 IN X.00008 IN 4 IN.0. 99.7 5.05 MM -.75 MM Y.000 8. MM 0. MM 0.7 8.45 87.0 Z.000 0.7 8.45 87.0 XX.00005 BLANK #8 04. 49.75 7..50 IN -.00 IN X.0000 IN 5 IN 7.8 95.78 48.9.75 MM - 7.45 MM Y.0005 8. MM 7.0 MM 4.40 5.80 0.0 Z.0000 4.40 5.80 0.0 XX.00005 #9 59.0 505.7 595.78.00 IN -.50 IN X.0000 IN 5 IN. 455.5 4.0 7.45 MM - 89.5 MM Y.0005 8. MM 9.7 MM 87. 404.57 7. Z.0000 87. 404.57 7. XX.00005 #0 4.4 58.5 994.7.50 IN - 4.00 IN X.0000 IN 8 IN 8.7 5.4 795. 89.5 MM - 0.85 MM Y.0005 8. MM.9 MM 8.9 45. 595.78 Z.0000 8.9 45. 595.78 Ring Gage Holders Black Anodized Aluminum FOR RING PRICE BLANK NO. A B C EACH 000-7/8-5.85 00-7/8-5.85 0-7/8-5.85 - - 9/ 5.85 4- - 5.85 5-7/8 5/ 9.4 4 5- - - 9.4 5 - - -5/ 9.4 Chrome ring gages available in sizes up to.0 in (.40 mm) Steel ring gages available in sizes up to.00 in (40.5 mm) Call for pricing and delivery Quantity discounts available on all ring gages TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page 7

INSPECTION & GAGING EXTRA LENGTH CLASS X GAGES Reversible pin gages in English and Metric up to lengths. Ideal for deep and hard to reach holes or slots. Inch Size Millimeter Size Centerless lapped to a 5 microfinish Up to long NIST Traceable Stabilized and heat treated to 0- RC Plus, Minus or Bilateral tolerance Price 4 Price 5 Price Price.000 IN -.099 IN.54 MM -.759 MM.4.44 407.0 5.7.000 IN -.0599 IN.7 MM -.5 MM 87.90 9.77 8. 9.4.000 IN -.009 IN.5 MM - 5.0 MM 59.89 8..0 9.5.00 IN -.749 IN 5. MM - 9.5 MM.97 8. 5.9.9.750 IN -.49 IN 9.5 MM -. MM 7.4 88.8.7..50 IN -.7500 IN. MM - 9.05 MM 7.4 9.7.7 44.89.750 IN -.8750 IN 9.05 MM -. MM 7.8 57. 09. 0..875 IN -.000 IN. MM - 5.40 MM.4 7. 40.5.48 No guarantee of straightness, due to Centerless Grinding process on these products PROGRESSIVE TRILOCk GAGES When you need to check parts quickly, Progressive plug gages are the best choice. Both the GO and NOGO diameters are stepped on a single gage member. All members are securely attached to a Trilock handle. All handles are marked with sizes and direction of tolerance. Class XX, X, Y, Z NIST traceable GO, NOGO tolerances Tool Steel 0/ Rockwell C Size / Range Class Tolerance Inches Member Length GO Portion NOGO Portion XX.00004 70.9 540.58.50 IN -.00 IN X.00008 7/8 IN 7/8 IN 7/8 IN. 4.4 8.5 MM - 5.05 MM Y.000 7.0 MM 47. MM. MM 89.79 79.58 Z.000 5.5 0.70 XX.00004 9.0 78.0.00 IN -.50 IN X.00008 IN IN 7/8 IN 74. 548.4 5.05 MM -.75 MM Y.000 7. MM 50.8 MM. MM.95 4.90 Z.000 9.9 8.8 XX.00005 8.78 77.5.50 IN -.00 IN X.0000 IN IN 7/8 IN.0.0.75 MM - 7.45 MM Y.0005 7. MM 50.8 MM. MM 7. 544.4 Z.0000 4.8 448.5 XX.00005 458.4 9.8.00 IN -.50 IN X.0000 IN IN 7/8 IN 5.7 705.4 7.45 MM - 89.5 MM Y.0005 7. MM 50.8 MM. MM 4.8 8.7 Z.0000. 55.4 XX.00005 555. 0.4.50 IN - 4.00 IN X.0000 IN IN 7/8 IN 449.8 898.5 89.5 MM - 0.85 MM Y.0005 79.4 MM 54.0 MM. MM 85.9 770.78 Z.0000.49 4.98 XX.00005 8.99 57.98 4.00 IN - 4.50 IN X.0000 IN IN 7/8 IN 505.9 00.8 0.85 MM - 4.55 MM Y.0005 79.4 MM 54.0 MM. MM 49.0 878.0 Z.0000.4 7.84 Steel Chrome Handle # Price 5 8.80 9.50 7.00 7.00 7.00 7.00 Page 74 TOLL FREE -800-544-794 (908) 88-05 FAX (908) 88-89 ESTABLISHED 97

QUICk ADJUST ADJUSTABLE V-BLOCk FOR COMPARATOR USE Model QSS- INSPECTION & GAGING Before Adjustment After Adjustment SPECIFICATIONS: Height: -" Height/ Float Capacity: 9/ Width: -" Length: 4-" Weight: lbs. Material: Carbon Steel Finish: Natural Groove Dimensions:..7 Wide X.078 Deep.. Wide X.054 Deep. Center Groove.40 Wide X. Deep QSS- $9.5 -" High T-base and base lock to fit most comparator tables. Six Holes:, 5/,, 7/,, 9/ Depth of Hole: OPTIONAL CLAMP $9.5 U.S. Patent #5,0,70 Granted June, 99. QUICK ADJUST allows machinists and inspectors to quickly line up components. QUICK ADJUST eliminates shimming time, and maximizes inspection time. QUICK ADJUST speeds up the inspection of parts that are unbalanced or top heavy. QUICK ADJUST actually encourages operators to measure because of the easy set up of components. result: More inspection, improved quality Fine and smooth adjustment with large adjusting screw. -pins in floating V assures smooth adjustment and accuracy. Can be customized to your specifications. TOLL FREE -800-544-794 45 LEHIGH AVENUE UNION, NEW JERSEY 0708-79 Page 75