F I X E D - H E I G H T D E S K B A S I C S..........................4 2 SEMI- SUPPORTED L- SHAPED DESK & RECTANGUL AR WORKSURFACE BASICS..........................................4 6 41 H E I G H T- A D J U S TA B L E D E S K B A S I C S.....................5 0 F I X E D - H E I G H T & H E I G H T- A D J U S TA B L E G A B L E G U I D E L I N E S......................................5 2 V I S I TO R O P T I O N B A S I C S.............................5 3 D E S K C O M P O N E N T S F O R W / R / S B A S I C S..................5 4 E X PA N S I O N D E S K I N G O N W / R / S T Y P I C A L W O R K S TAT I O N S...5 8 D E S K F I N I S H E S....................................6 0 G R A I N D I R E C T I O N / U S E R E D G E.......................6 2
fixed-height desk basics Expansion Desking s are offered in Generic, Linear and Curvilinear shapes. They can be used individually or with other desks to create a variety of workstation configurations. 42 42 Three fixed-height desks are available: Modular, Single Structure and Semi-Supported L-Shaped Desks Desk assemblies span up to 84" in width without multiple supports Desks are shipped knocked down Desks are compatible with all Teknion under storage products Cannot be attached to Teknion's W/R/S Wall Rail System. For details on W/R/S, refer to page 54 Generic Shape Modular Desks Available in a variety of shapes including: Rectangular, EDP, EDP Corner, Standard Corner, Extended Corner, Rectangular and D-Shaped Peninsula and Bridge 42 Curvilinear Shape Modular Desks Designed to create wrap-around workstations that minimize lateral movement 42 L-Shaped Desks Two L-Shapes are available: Single Structure or Semi- Supported Available with or without Radius Corner Worksurface Single Structure Desk is supported with gables on both ends Semi-Supported L-Shaped Desks are supported with gables on one direction and a selection of various support styles (Legs, Frame Leg, Semi-Supported Leg, storage; all not included) on the other direction L-Shaped Desks are available up to 84" x 84" Also available: Linear Shape Modular Desks Inspired from other Teknion product offerings May be used as an aesthetic alternative to generic or curvilinear shape desks Standard Radius Corner Desk Half Gables (RTSR) End Worksurface Convex (RTCD)
fixed-height desk basics (continued) Worksurfaces Worksurface dimensions listed are actual dimensions of the finished product Some desks include a built-in compressed gas support for mouse and keyboard; see individual product pages Height adjustment of keyboard is activated by a release paddle located on the right underside of the surface Grain direction varies depending on the type of desk specified; see page 62 The tilt of keyboard is adjusted using a knob located on the left underside of the surface 43 6.5" 6.5" 35.5" 29" 22.5" +15 0-15 0" 43 End Worksurface Half-Moon (RHMB) Used to attach and complete back-to-back workstations Must connect to freestanding desks using flush plates Bridge Desk Quarter-Moon (RQMB) Completes a by connecting to a freestanding desk with flush plates Comes with two gables, one half and one 3/4 Can be applied to left or right of Depth must equal desk depth Accessories Can be specified separately Comes with a choice of leg (Central Post Leg 3 1/2" Round or Camber Base) Width must equal the total depth of both desks 43 43 43
fixed-height desk basics (continued) 44 All desks include a, grommets, structural beams, corner posts and gables (or c-legs) 44 modular desk anatomy 1 2 1 Desking Column Grommet 2 Worksurface 3 Structural Beam 3 4 5 Desking Gable Grommet Corner Post 44 5 4 6 7 Wire Management Clip Gable Attachment 29" floor to top of finished 6 7 8 8 9 Non-Handed Gable (except for Metal C-Leg) Levelers are included with the gable and have an adjustment range of 3", except for Metal C-Leg (1" adjustment range) 9 single structure L-shaped desk anatomy 44 10 Assembly Plate is available with L-Shaped Desks only 10
fixed-height desk basics (continued) All desks with half gables must be connected to other desks 45 Full Gable Half Gable Metal C-Leg Gables Full and half gables are non-handed for on-site reconfigurability; Metal C-Leg is handed Flush-Mounted Modesty Panels (RDML, RDMO) Not required for structural stability, except in some configurations when overhead cabinets are stacked. For details, refer to page 142 Can be specified full- or 3/4-height Available in Solid (Laminate) or Metal. Metal panels are offered in two styles: Embossed (4 patterns) and Solid Can be specified with or without grommet All gable styles include a grommet Half gables provide additional kneespace clearance at desk junctions Flush plates are included to maintain stability and level the surface A desk cannot be mounted with Metal C-Legs, if: overhead cabinets are stacked Sit-On Cabinets or Elevated Desktop Cabinets are used 45 Grommets Desks come with factory-made grommet cut-outs on the gables and s Provide openings for electrical wiring and communication cables Include plastic ring and cover Supports Six support styles are available to provide a variety of aesthetic options Include leveler with a 3" adjustment range Support style/desk combinations are not all available; see individual product pages 24" to 32" floor to top of finished (this leg only) 2" Post Leg Adjustable 29" to 32" floor to top of finished (All others) Angled Leg Linear Style 3/12" Square Round Central Post Legs Camber Base 45 45 45
semi-supported L-shaped desk & rectangular basics Expansion Desking semi-supported L-shaped desks and s can be used to minimize components and reduce the overall cost of the workstation. 46 46 Only Semi-Supported L-Shaped Desks (RNDW_ and RNDR_), Semi-Supported L-Shaped Desks with Radius Corner (RNRW_ and RNRR_), Rectangular Peninsula Desk (RDRP), Rectangular Worksurfaces (RTLDL and RTLDC) can be semi-supported The left or right handed configuration is available. It is determined by the return (the shortest ). The right handed configuration is illustrated below Legs, Frame Leg, Semi-Supported Leg, or Storage, must be ordered separately Suspended Modesty Panel is optional and can be ordered separately semi-supported L-shaped desk anatomy 2 3 46 1 4 13 7 6 29" floor to top of finished 8 9 12 10 5 11 46 1 Worksurface 6 Cable Tray 2 Desking Column Grommet 7 Corner Post 3 Assembly Plate 8 Wire Management Clip 4 5 Desking Worksurface Grommet is included with desk and is centered in the. Not available with Semi- Supported L-Shaped Desk with Radius Corner. It can be changed with Rectangular Grommets (RAGC) which can be specified separately Supports: Legs, Frame Legs, Semi-Supported Leg, Storage (Supported or Hang-On) and W/R/S Brackets are not included with ; they must be specified separately 9 10 11 12 13 Gable Attachment Non-Handed Gable Levelers are included with the gable and have an adjustment range of 3" Desking Gable Grommet Structural Beam
semi-supported L-shaped desk & rectangular basics (continued) supporting applications 28" high freestanding storage and other supports Rectangular Worksurface (RTLDL or RTLDC) in Collaborative Applications Must be connected in the junction of two desks (shown) or can also be used as a return on a single desk with a full gable or credenza Even widths are actual; odd widths are 1/2" smaller 60" maximum unsupported span is required when connected as a return on a junction of two desks with half gables or c-legs Linking Plates Can be used to link one end of a to a desk When specified, Linking Plates and hardware are included with desk or 47 60" max. Supported by a Freestanding Storage Configurations Can be used to support one end of a desk or Must be installed with Supported Pedestal and hardware are included with desk to maintain stability 47 Side-Supported Configurations Cabinet depth must equal depth of under which it is installed Legs Five leg support styles are available: Back-Supported Configurations Cabinet width must equal depth of under which it is installed 24" to 32" floor to top of finished (this leg only) 29" to 32" floor to top of finished (All others) 2" Post Leg Adjustable Angled Leg Square 3 1/2" Round Central Post Legs Linear Leg Central Post Legs can be specified with Rectangular Worksurfaces (RTLDL, RTLDC) only When specified, support and hardware are not included with desk Also Available: Semi-Supported Leg Solid (RAVG) Supports the end of a which must be attached to another desk or storage to maintain stability Must be specified full width only Cannot replace a standard gable when attached to a corner post When specified, support and hardware are not included with desk Frame Legs (RWWO, RWWFL, or RWWFG) Support the end of a to maintain stability Three Frame Leg support styles are available: 29" from floor to top of finished Open Solid Infill When specified, support and hardware are not included with desk Glass Infill 47 47 47
semi-supported L-shaped desk & rectangular basics (continued) 48 hanging applications freestanding storage higher than 28" 48 Side-Supported Configurations Cabinet width must be added to determine the workstation footprint Only the 24" deep Rectangular Worksurface can be sidesupported by the Hang-On Supports 48 48 Back-Supported Configurations Cabinet width must equal depth of under which it is installed Cabinet depth must be added to determine the workstation footprint Freestanding Storage Higher than 28" and Hang-On Kit (RBXHK) Can be used to support one end of a desk or Must be installed with Hang-On Kit to maintain stability Semi-Supported Desk widths are available in 3" increments in order to fit with standard 6" layout for hang-on storage configurations When specified, Hang-On Brackets and hardware are included with desk, except for Extended Supporting Towers (RBXT or RBXTC) the brackets and hardware are included with storage only
semi-supported L-shaped desk & rectangular basics (continued) freestanding applications Freestanding Configurations The appropriate support combination will allow using the Rectangular Worksurface as a freestanding product 49 49 Frame Legs Hang-On Supports and Semi-Supported Leg Some restrictions apply to the support combinations: Semi-Supported Legs Semi-Supported Leg and Legs 49 49 49
height-adjustable desk basics Expansion Desking height-adjustable desks can accommodate all the accessories. 50 Height adjustment must be executed by a qualified installer Cannot be attached to Teknion's W/R/S Wall Rail System. For details on W/R/S, refer to page 54 50 1 7" d 2 3 50 13 12 4 7 8 6 5 11 9 10 50 1 Desking Column Grommet 8 Backsplash 2 Fixed-Height Worksurface 9 Handed Height-Adjustable Metal C-Leg 3 Height-Adjustable Worksurface 10 Levelers are included with the gable and have an adjustment range of 3" 4 Gable Attachment 11 Desking Gable Grommet 5 Handed Height-Adjustable Half Metal Gable 12 Wire Management Clip 6 Corner Post 13 Structural Beam 7 Worksurface Support
height-adjustable desk basics (continued) When Height-Adjustable Desks with Half Gables (RJRS, RJRD, RJUS and RJUD) are specified, the adjacent desk must be adjusted at the same height and must be linked with flush plates to maintain stability Only 2" Post Legs Adjustable can be installed under Worksurfaces (RTLDL, RTLDC and RTCD) attached to heightadjustable desks Overhead Cabinets cannot be stacked 51 Height-Adjustable Desks Available in Rectangular and Extended Corner shapes Grommets Height-Adjustable Desks come with factory-made grommet cutouts on the gables and s Provide openings for electrical wiring and communication cables Include plastic ring and cover Pedestals When height is under 29", 0612 configuration Pedestal (RBSP) or Mobile Pedestal with Seat (RBTPS) can be used 51 26" to 32" floor to top of finished 29" floor to top of finished Flush-Mounted Modesty Panel (RDML and RDMO) Can be specified full- or 3/4-height Is mandatory only on shortest width (Width A, see product pages) of Height-Adjustable Extended Corner Desks Height-Adjustable Half Metal Gable Handed and attached with universal mounting hardware Grommet included Provides additional kneespace clearance at desk junction Full Metal Gable Metal C-Leg Height-Adjustable Full Metal Gable and Height-Adjustable Metal C-Leg Handed and attached with universal mounting hardware Grommet included 51 51 51
fixed-height & height-adjustable gable guidelines Desks are available with full or half gables. Half gables provide additional kneespace clearance at desk junction. 52 52 Height-Adjustable Gables are offered for Height-Adjustable Desks only Two half gables can sufficiently support two semi-supported desks butted up against one another. Flush plates are included to maintain stability and level the surface All desks with half gables cannot be used alone; they must be combined with one or more desks with half gable to form a complete workstation Fixed-Height Gables Height-Adjustable Gables Full Gable Full Gable Half Gable Half Gable Metal C-Leg Metal C-Leg 52 Two Full Gables or Metal C-Legs Single desks with two full gables or Metal C-Legs are freestanding and can either be used alone or combined with other desks Any desk that does not have two full gables or Metal C-Legs is semi-supported and must be attached to other desks with full gable or Metal C-Leg, or similar support at both ends A run of desks cannot exceed 168" without full gable or Metal C-Leg support to maintain stability 168" max 168" max Support Requirements for Overhead Storage When supporting overhead storage, desks require full gable or Metal C-Leg every 168" maximum 52 Extended or Corner Desks Can be used instead of full gables or Metal C-Legs to provide stability and increase kneespace clearance The distance between corner desks must not exceed 72" 72" max 120" max 120" max Shared Desks Provide sufficient support (full gables or Metal C-Legs are not required) Act as a full gable or a Metal C-Leg May not span more than 120" on either side without full gable or Metal C-Leg support
visitor option basics The visitor recessed option allows an additional kneespace clearance for visitor. 53 Flush Visitor Option (F) Is ideal for small meeting spaces or team workstations 53 8" Recessed Visitor Option (R) Allows more kneespace clearance for visitor Creates an 8" overhang Modifies the Inset Modesty Panel width. Use the Inset Modesty Panel (RAML or RAMO) with the Recessed Desk Visitor option for this application 53 53 53
desk components for w/r/s basics Using specific components, Expansion Desking can be combined with Teknion's Wall Rail System, to create a variety of workstation configurations. 54 54 "W/R/S" products listed below are to be used with the W/R/S Wall Rail System only Products listed below must be ordered individually For details on W/R/S products, refer to W/R/S Wall Rail System Price and Application Guide desk components anatomy for W/R/S 2 54 3 1 4 29" floor to top of finished 7 6 5 9 8 54 1 W/R/S-Mounted Worksurface Bracket 6 Flush Plate 2 W/R/S Frame is not included with Expansion Desking 7 Desking Worksurface Grommet 3 4 5 W/R/S Rectangular Worksurface Semi-Supported Leg Levelers are included with the gable and have an adjustment range of 3" 8 9 Support: Legs, Semi-Supported Leg, Frame Leg, or Storage (Supported and Hang-On) are not included; must be ordered separately Worksurface Suspended Modesty Panel
desk components for w/r/s basics (continued) W/R/S-Mounted Worksurface Brackets (RAVB) Connects to the W/R/S Frame Must be directly installed on the -level Horizontal Rail and connected to another 55 Two positions are allowed: 1/8" gap prevents access to wires under the 1/8" 42" to 60" w 1" gap provides openings for electrical wiring and communication cables under the 55 1" 42" to 84" w 20", 24", 30" d Finished in Platinum W/R/S Rectangular Worksurfaces (RTLVL and RTLVC) Worksurface dimensions listed are actual dimensions of the finished product Connected to W/R/S Frame with W/R/S-Mounted Worksurface Brackets at one end and Legs, Semi-Supported Leg, Frame Leg, or Storage (Supported and Hang-On) at the other end Two s can be connected with flush plates (included with s) to maintain stability Grain direction varies depending on the specified; see page 62 55 55 55
desk components for w/r/s basics (continued) 56 56 Semi-Supported Leg Solid (RAVG) Supports the end or the side of a to maintain stability Can be specified full width or shorter A 4" minimum clearance is required between the gable and the W/R/S Frame to open the Electrical Pass-Through Baseboard. For easy access, use a 6" clearance 4" minimum clearance 56 14", 18", 20", 24", 30" d 30"to 84" w 56 Worksurface Suspended Modesty Panel (REVL, REVO, REVG) Can be installed under W/R/S Rectangular Worksurfaces (RTLVL and RTLVC) Width of modesty panel specified depends on support selected; see on page 91 A 4" minimum clearance is required between the modesty panel and the W/R/S Frame to open the Electrical Pass- Through Baseboard. For easy access, use a 6" clearance 4" minimum clearance
desk components for w/r/s basics (continued) 57 57 Support Applications Five types of support can be used under W/R/S Rectangular Worksurfaces Legs (three styles available) Hang-On Storage (with Hang-On Kit) Storage (with Hang-On or Supported Pedestal Kit) Semi-Supported Leg (RAVG) Frame Leg (RWWF, RWWO) Storage must be installed with Supported Pedestal Kit (RBXSK) or Hang-On Kit (RBXHK), which must be ordered separately. For details, refer to the Freestanding Storage section 24" to 32" floor to top of finished (this leg only) 2" Post Leg Adjustable 29" to 32" floor to top of finished (All others) Angled Leg Linear Leg A 4" minimum clearance is required between the pedestal and the W/R/S Frame to open the Electrical Pass-Through Baseboard. For easy access, use a 6" clearance 4" minimum clearance 57 57 57
expansion desking on w/r/s typical workstations 58 The end of a W/R/S Rectangular Worksurface must always be supported 58 perpendicular applications 58 Modesty Panel is not required for structural stability parallel applications 58 A support must be installed at each end to maintain stability 84" 84" A support must be installed at each end and at every 84" Worksurfaces less than 84" wide can be connected with linking plates Linking Plates
expansion desking on w/r/s typical workstations (continued) 'L' configuration workstation applications For a 'L' configuration workstation, the maximum span is 84" To allow opening the Electrical Pass-Through Baseboard, the Semi-Supported Leg and Modesty Panel must be specified shorter 84" max. Gap 59 'U' configuration workstation applications 96" max. 14" deep Semi-Supported Leg 59 For a 'U' configuration workstation, the maximum span is 96" The middle must be supported with a 14" deep Semi-Supported Leg centered under the To allow opening the Electrical Pass -Through Baseboard, a 14" deep Semi-Supported Leg must be installed flush-front with A Semi-Supported Leg can also be connected to the flush-rear of a to provide stability with knee clearance Semi-Supported Leg 59 59 59
desk finishes Desks and related parts are available in a wide variety of finish colors. Finish codes must be included in the order. 60 All Laminate components are protected with a solid plastic edge 60 Worksurface Keyboard Supports Available in Foundation Laminate colors or Flintwood (No Cathedral) Worksurface Keyboard Support Mechanisms Finished in Black 60 All Worksurfaces Available in Foundation Laminate colors or Flintwood (No Cathedral) 60 Fixed-Height Solid End Gables and Semi-Supported Leg Available in Source Laminate colors Corner Posts and Structural Beams will match the color of end gables Fixed-Height and Height-Adjustable Metal End Gables Available in Foundation or Mica colors Corner Posts and Structural Beams will match the color of end gables Edge Trims Available in Straight Trim (6) or Flintwood Flat Trim (9) Flintwood Flat Trim is only available on Flintwood s. Edge trims will be finished to match the Flintwood Straight Trim is not available on Flintwood s Fixed-Height and Height-Adjustable Full Metal C-Legs Available in Foundation or Mica colors Corner Posts and Structural Beams will match the color of Metal C-Legs
All Desking Grommets (RAG) Available in Source Laminate, Foundation and Mica colors Worksurface grommets match with a Flintwood finish or with a Foundation Laminate finish whenever a corresponding match is available in Source Laminate colors. Otherwise grommets match with the gable finish Grommets on modesty panels will match the panel finish Solid Modesty Panels (RDML, RAML, REML and REVL) Available in Source Laminate colors Metal Modesty Panels (RDMO, RAMO, REMO and REVO) Available in Foundation or Mica colors Glass Modesty Panels (REVG) Available in 1/4" (6 mm) Standard or Back-Painted tempered glass Standard glass finish: Frosted (FT) modular desks desk finishes (continued) Flintwood Work. Finish Closest Match for Grommet Finish Code Color Code Color Finish Style FX Flax 3J Flax Reflect Source FN Natural Pecan 3K Pecan Reflect Source FM Medium Sycamore XH Cherry Source FC Chianti XF Chianti Source FD Dark Walnut XE Dark Walnut Source NR Sierra Flint XQ Walnut Cathedralgrain Source NT Cocoa Brown Flint 3N Cocoa Brown Reflect Source VA Sycamore 3P Sycamore Reflect Source VB Black Walnut DA Espresso Source VZ Blonde Maple XN* Nevada Source 5N White Oak 3F Campus Oak Source 5P Poppy Seed 3W Slate Source 5Q Harvest Cherry 3E Estate Cherry Source 5R Earl Grey R Bronze Foundation 5S Silverwash 3V Earth Source 5T White Truffle XN* Nevada Source 5V Caraway 3V Earth Source 5W Drift Oak 3U Sand Source 5Z American Walnut XQ Walnut Cathedralgrain Source * This match suggestion is not close enough to be considered as tone on tone 61 61 Levelers Finished in Black 61 Legs Available in Foundation or Mica colors 61 61
grain direction / user edge laminate grain/pattern direction 62 Grain direction is an important factor when planning workstation, if a different grain direction is required, please contact your Teknion Customer Service Representative Shading indicates user edge 62 24" EXCEPTION 24" x 84" Flintwood only 84" 24" or 30" 57" to 84" RUDR, RUDS, RUDD or RNDWR, RNDRR, RNDWS, RNDRS RURR, RURS, RURD or RNRWR, RNRRR, RNRWS, RNRRS RDAR RDRR, RDRS, or RDRD 62 RDFS or RDFD RDUR, RDUS or RDUD RVSS or RVSD RKDS RKSS RKXD RVRD RDSD RDSK RTSR RVUR, RVUS or RVUD RDKR, RDKS or RDKD RVWR, RVWS or RVWD RTLDL RTLDC RTRT RDRP RDBN or RDBU 62 RVDD RVDK RVND RVXD RVXKD RDPD RHMB RQMB RTCD RTSQ RTCI RTEL RJRR, RJRS or RJRD RJUS or RJUD RTLVL RTLVC
laminate grain/pattern direction (continued) modular desks grain direction / user edge (continued) The pattern direction of Laminate is not "centered" and grain direction can appear in different direction from side-to-side Laminate = = Grain Direction = User Edge User Edge 63 Flush-Mounted Modesty Panel Suspended Modesty Panel Full Gable Semi-Supported Leg Worksurface Suspended Modesty Panel Half Gable Inset Modesty Panel flintwood grain/pattern direction 63 There is no user edge so care must be taken during installation to match grain/pattern direction Grain/patterns are not "centered" on Applies to Flintwood (Standard) Flintwood = = Grain Direction = Grain Direction Grain Direction User Edge Grain Direction User Edge Grain Direction Grain direction will appear in the same direction, from side to side User Edge User Edge Left Handed Right Handed 63 User Edge User Edge Regardless of handedness, grain direction from left to right from the user's perspective 63 63
spine desks