Atlas Copco Diamond Tools. Hobic Product Catalogue 2007

Atlas Copco Diamond Tools Hobic Product Catalogue 2007

Contents Dedicated to being the best. 1 Torpedo Technology a cut above. 2 Drilling Parameters 4 Hobic Surface Set and Impregnated Reaming Shells 5 Hobic Casing and Rod Shoes 5 Craelius Bits 5 Hobic Bronze 5 Hobic Crown Profiles 6 Wireline Diamond Impregnated Core Bits 7 Double Tube 7 Double Tube Thin Wall 12 Triple Tube 16 Face Discharge and Sand 18 Reaming Shell Gauge (RSG) 19 Oversize 20 Conventional Diamond Impregnated Core Bits 21 Thin Wall 21 Reaming Shells 22 Casing and Rod Shoes 23 Unit Weights 24 Hobic Bit Matrix Selection Chart back cover

Dedicated to being the best. We are committed to your superior productivity through interaction and innovation. Atlas Copco Exploration Products continues to set new standards in the design and manufacture of diamond drill bits for the world s exploration industry. As with Atlas Copco drills and in-hole-tools, the company s Hobic bits are the choice of experienced drillers for consistently meeting and exceeding expectations. Hobic is a true blue collar Canadian bit. We have incorporated the experiences and on-site requirements of the world s best drillers into the design and development of the Hobic line. Combined with cutting edge metallurgical technology and our ongoing quest to take penetration rates higher, the result is Hobic for the most demanding core drilling conditions anywhere today and into the future. If you re looking for proof of our commitment to continuous improvement, consider that more than ninety percent of the impregnated diamond products in this catalogue are the result of design and technology upgrades that have occurred just in the last two years. Need more proof? Consider this: In South Africa, surface drillers working in platinum formations with Hobic NQ diamond bits exceeded the dream limit of 50 cm/ minute (20 in./minute) penetration. In Nevada, a contractor using an Atlas Copco Diamec U8 rig and Hobic Torpedo Technology bit drilled 185 metres (607 feet) in one ten hour shift. In Chile and Peru, Torpedo Technology bits provided exceptionally longer bit life in extremely abrasive rock, averaging 140 metres compared to previous bits that lasted a maximum of 90 metres. Having the best bits in the business is only part of the Hobic story. Atlas Copco s worldwide distribution network ensures the product arrives where and when it is needed. It s what our customers expect, and we deliver. 1

Torpedo Technology a cut above. For more than two decades, Hobic bits have been serving the exploration industries of North and South America. Today, thanks to Torpedo Technology, contractors around the world are demanding the kind of results only available from this premium line of diamond products. Torpedo Technology features an exclusive matrix design that actually increases the cutting efficiency of each singular segment. Where traditional matrices have caused irregular wear and even premature failures, Torpedo Technology s new alloy-based matrices provide increased toughness and control wear so that our premium synthetic diamonds are consistently exposed for optimum penetration. Torpedo Technology matrices are available on all seven Hobic crown profiles and each matrix formula is able to drill a broad range of formations. Torpedo Technology has succeeded in lowering the bit cost per metre drilled. Its exceptional durability and superior abrasion resistance have proven to increase penetration rates by 30% and extend overall bit life by 60%. 2

Torpedo Technology Consider these advantages 1 3 2 1 Torpedo V Design Although many have tried, Hobic s proprietary Torpedo V profile and unique matrix formula are unmatched in the industry. The V-shaped cutting segments and high-speed flushing channels reduce the contact area providing unparalleled penetration rates. 3 2 2 3 Torpedo Tough Edge To reduce wear caused by high speed flushing, Torpedo bits feature abrasion resistant carbide prisms, strategically placed to resist diametric wear and maintain the correct inner/outer gauge for the life of the bit. Torpedo Super Bond The secret to the longer life and cutting performance of the Torpedo matrices is a new bonding material. Developed especially for the alloy-based matrices, it comprises nonreactive elements so the matrix can maintain its superior metallurgical properties. 3

Drilling Parameters Many factors influence the performance of impregnated bits. In addition to the type of formation being drilled, factors such as hole diameter, depth, ground conditions, type of drill, weight on bit, water flow and RPM all have an impact on performance. The top priority of today s drillers is performance. To achieve optimum drilling production while balancing bit life, a correlation between RPM and penetration rate has been developed for impregnated diamond bits. This parameter is referred to as Rotation per Inch of advance (RPI) or Rotation per centimeter (RPC). This parameter can be utilized as a guideline to increase penetration rates while maintaining reasonable bit life. Sample Calculation of RPI or RPC RPI or RPC = RPM Penetration Rate Rod Size N N Calculation RPM 1200 1200 Water Flow Penetration Rate 8 /min 20.3 cm/min = RPI/RPC = 150 RPI = 59 RPC Bit sizes RPM Optimum RPM RPI (RPC) Suggested A 1500-1700 1650 250 (100) B 1200-1450 1350 200 (79) N 900-1200 1100 170 (67) H 750-950 850 130 (51) P 600-750 650 100 (40) This chart has been developed as a guideline for Hobic impregnated diamond bits. Water flow is a critical parameter. Insufficient or excessive water flow can result in poor performance. Water Flow for Hobic Impregnated Bits Size Litre/min. (USGPM) RPM A 15-20 (4-5) 1650 B 30-36 (8-10) 1350 N 38-45 (10-12) 1100 H 50-60 (13-16) 850 P 75-84 (20-22) 650 Water flow may vary depending on the specific application and therefore this chart is to only be used as a guideline. Polished Bit Often an indication that an impregnated bit has become polished will be a reduction in torque and penetration rate, with an increase in the weight on bit (WOB). Controlling the flow of water can be used as a method to sharpen the bit. To sharpen a bit in the hole, gradually reduce the flow of water while increasing the weight on the bit to strip the bit and expose fresh diamonds. Once the bit has been sharpened increase the flow of water and reduce the WOB as required. 4

Hobic Surface Set and Impregnated Reaming Shells Hobic reaming shells are manufactured to withstand difficult drilling conditions and provide long life. Surface set reaming shells in all common DCDMA sizes are a stock item. Impregnated reaming shells and reaming shells in full hole profile are also available, but may require longer lead times. Reaming shells are available in industry standard lengths of 15 cm (6 ), 25 cm (10 ) and 46 cm (18 3/8 ). A combination of polycrystalline diamonds (PCD) and natural diamonds are utilized for most standard reaming shells and all heavy duty reaming shells. Hobic Casing and Rod Shoes Hobic casing and rod shoes are manufactured to handle a broad range of conditions, from unconsolidated overburden to broken, abrasive formations. Impregnated standard and heavy duty casing shoes are stock items. Surface set casing shoes are available, but require longer lead times. Rod shoes are available only in an impregnated design. Craelius Bits Since 1866, Atlas Copco s Craelius line has pioneered many innovative products in the diamond drilling industry. With over 100 years of experience, Craelius diamond impregnated bits offer an alternative in hard fissured and fractured formations. The full range of complimentary diamond products from Craelius includes the long life, 16mm Jet Bit. Hobic Bronze Developed in South African drilling conditions, Hobic Bronze offers a wide range of specialty bits, designed for non-abrasive to soft and broken abrasive formations. Hobic Bronze is used extensively in geotechnical applications as well as coal exploration. Hobic Bronze range of specialty bits: Surface set bits Polycrystalline diamond bits (PCD) Tungsten bits Non-coring bits Large diameter bits 5

Hobic Crown Profiles Channel Flushing (CF) Standard profile - general purpose design Suitable for a broad range of formations Extended Channel Flushing (ECF) Preferable in competent and semi-broken rock Suitable for mixed formations containing containing broken and competent zones Wedge (pie shaped) Superior flushing capability Improved productivity Preferable in abrasive or broken rock Torpedo V High performance free cutting bit High productivity Suitable for hard/competent formations. Turbo High productivity Suitable for competent formations Face Discharge (FD) Designed to minimize flushing of core sample Suitable for broken/granular formations Sand Profile Designed for optimum water flow with minimized flushing of core sample Suitable for broken or competent formations 6

Double Tube AQ Double Tube AQ 7AC TORPEDO V...................... 13..................7..........3760 90 3465 AQ 7AC F TORPEDO V...................... 13..................7..........3760 90 3865 AQ 8AC ECF.............................. 13..................7..........3760 90 3946 AQ 8AC TORPEDO V...................... 13..................7..........3760 90 3947 AQ 9AC CF............................... 10..................8..........3760 90 3731 BQ Double Tube BQ 3AC CF............................... 13..................8..........3760 90 4309 BQ 3AC TORPEDO V...................... 10..................7..........3760 90 4311 BQ 3AC 1/4 WEDGE WW................... 13..................6..........3760 90 4029 BQ 5AC CF............................... 10..................8..........3760 90 4302 BQ 5AC CF............................... 13..................8..........3760 90 4086 BQ 5AC ECF.............................. 10..................9..........3760 90 4320 BQ 5AC ECF.............................. 13..................9..........3760 90 4091 BQ 5AC TORPEDO V...................... 10..................7..........3760 90 4312 BQ 5AC TORPEDO V...................... 13..................7..........3760 90 3538 BQ 5AC 1/4 WEDGE WW................... 10..................6..........3760 90 4327 BQ 5AC 1/4 WEDGE WW................... 13..................6..........3760 90 4030 BQ 7AC CF............................... 10..................8..........3760 90 4303 BQ 7AC CF............................... 13..................8..........3760 90 4085 BQ 7AC ECF.............................. 10..................9..........3760 90 4321 BQ 7AC ECF.............................. 13..................9..........3760 90 4090 BQ 7AC TURBO........................... 13..................8..........3760 90 3981 BQ 7AC TORPEDO V...................... 10..................7..........3760 90 4313 BQ 7AC TORPEDO V...................... 13..................7..........3760 90 3348 BQ 7AC 1/4 WEDGE WW................... 10..................6..........3760 90 4328 BQ 7AC 1/4 WEDGE WW................... 13..................6..........3760 90 4335 BQ 7AC F CF............................... 10..................8..........3760 90 4304 BQ 7AC F CF............................... 13..................8..........3760 90 4084 BQ 7AC F ECF.............................. 10..................9..........3760 90 4322 BQ 7AC F ECF.............................. 13..................9..........3760 90 4089 BQ 7AC F TORPEDO V...................... 10..................7..........3760 90 4314 BQ 7AC F TORPEDO V...................... 13..................7..........3760 90 3866 BQ 7AC F 1/4 WEDGE WW................... 10..................6..........3760 90 4329 BQ 7AC F 1/4 WEDGE WW................... 13..................6..........3760 90 4336 BQ 7D CF............................... 10..................8..........3760 90 3257 BQ 7D TORPEDO V...................... 10..................7..........3760 90 2717 BQ 7SA TURBO........................... 10..................8..........3760 90 1772 BQ 7SA TORPEDO V...................... 10..................7..........3760 90 2438 BQ 8AC CF............................... 10..................8..........3760 90 4305 BQ 8AC ECF.............................. 10..................9..........3760 90 4224 BQ 8AC ECF.............................. 13..................9..........3760 90 4326 BQ 8AC TORPEDO V...................... 10..................7..........3760 90 4315 BQ 8AC TORPEDO V...................... 13..................7..........3760 90 4319 BQ 8AC 1/4 WEDGE WW................... 10..................6..........3760 90 4330 BQ 8AC 1/4 WEDGE WW................... 13..................6..........3760 90 4337 BQ 9AC CF............................... 10..................8..........3760 90 3732 BQ 9AC CF............................... 13..................8..........3760 90 4083 BQ 9AC ECF.............................. 10..................9..........3760 90 4225 7

Double Tube BQ Double Tube continued BQ 9AC ECF.............................. 13..................9..........3760 90 4088 BQ 9AC TORPEDO V...................... 10..................7..........3760 90 4316 BQ 9AC TORPEDO V...................... 13..................7..........3760 90 3545 BQ 9AC 1/4 WEDGE WW................... 10..................6..........3760 90 4331 BQ 9AC 1/4 WEDGE WW................... 13..................6..........3760 90 4338 BQ 10E4 CF............................... 10..................8..........3760 00 0017 BQ 11AC CF............................... 10..................8..........3760 90 4306 BQ 11AC CF............................... 13..................8..........3760 90 4082 BQ 11AC ECF.............................. 10..................9..........3760 90 4323 BQ 11AC ECF.............................. 13..................9..........3760 90 4087 BQ 11AC TORPEDO V...................... 10..................7..........3760 90 3368 BQ 11AC TORPEDO V...................... 13..................7..........3760 90 3537 BQ 11AC 1/4 WEDGE WW................... 10..................6..........3760 90 4332 BQ 11AC 1/4 WEDGE WW................... 13..................6..........3760 90 4339 BQ 12/14 CF............................... 10..................8..........3760 90 0753 BQ 12/14 TURBO........................... 10..................8..........3760 90 2715 BQ 13AC CF............................... 10..................8..........3760 90 4307 BQ 13AC CF............................... 13..................8..........3760 90 4081 BQ 13AC ECF.............................. 10..................9..........3760 90 4324 BQ 13AC ECF.............................. 13..................9..........3760 90 3927 BQ 13AC TORPEDO V...................... 10..................7..........3760 90 4317 BQ 13AC TORPEDO V...................... 13..................7..........3760 90 3925 BQ 13AC 1/4 WEDGE WW................... 10..................6..........3760 90 4333 BQ 13AC 1/4 WEDGE WW................... 13..................6..........3760 90 4340 BQ 15AC CF............................... 10..................8..........3760 90 4308 BQ 15AC CF............................... 13..................8..........3760 90 4310 BQ 15AC ECF.............................. 10..................9..........3760 90 4325 BQ 15AC ECF.............................. 13..................9..........3760 90 3928 BQ 15AC TORPEDO V...................... 10..................7..........3760 90 4318 BQ 15AC TORPEDO V...................... 13..................7..........3760 90 3926 BQ 15AC 1/4 WEDGE WW................... 10..................6..........3760 90 4334 BQ 15AC 1/4 WEDGE WW................... 13..................6..........3760 90 4341 NQ Double Tube NQ 2C CF............................... 10................. 10.........3760 90 1532 NQ 3AC TORPEDO V...................... 13..................9..........3760 90 3445 NQ 3AC 1/4 WEDGE WW................... 10..................8..........3760 90 3822 NQ 3AC 1/4 WEDGE WW................... 13........ R........8..........3760 90 4263 NQ 5AC CF............................... 10................. 10.........3760 90 4379 NQ 5AC CF............................... 13................. 10.........3760 90 4092 NQ 5AC ECF.............................. 10................. 11.........3760 90 4387 NQ 5AC ECF.............................. 13................. 11.........3760 90 4096 NQ 5AC TURBO........................... 13................. 10.........3760 90 4097 NQ 5AC TORPEDO V...................... 10..................9..........3760 90 4405 NQ 5AC TORPEDO V...................... 13..................9..........3760 90 3665 NQ 5AC 1/4 WEDGE WW................... 10..................8..........3760 90 4395 NQ 5AC 1/4 WEDGE WW................... 13..................8..........3760 90 4103 NQ 5AC 1/4 WEDGE WW................... 13........ R........8..........3760 90 4270 NQ 7AC CF............................... 10................. 10.........3760 90 4380 NQ 7AC CF............................... 13................. 10.........3760 90 4093 NQ 7AC ECF.............................. 10................. 11.........3760 90 4388 NQ 7AC ECF.............................. 13................. 11.........3760 90 3983 8

Double Tube NQ Double Tube continued NQ 7AC TURBO........................... 13................. 10.........3760 90 4098 NQ 7AC TORPEDO V...................... 10..................9..........3760 90 3654 NQ 7AC TORPEDO V...................... 13..................9..........3760 90 3350 NQ 7AC 1/4 WEDGE WW................... 10..................8..........3760 90 4396 NQ 7AC 1/4 WEDGE WW................... 13..................8..........3760 90 4104 NQ 7AC 1/4 WEDGE WW................... 13........ R........8..........3760 90 4264 NQ 7AC F CF............................... 10................. 10.........3760 90 4381 NQ 7AC F CF............................... 13................. 10.........3760 90 4094 NQ 7AC F ECF.............................. 10................. 11.........3760 90 4389 NQ 7AC F ECF.............................. 13................. 11.........3760 90 3807 NQ 7AC F TURBO........................... 13................. 10.........3760 90 4099 NQ 7AC F TORPEDO V...................... 10..................9..........3760 90 4406 NQ 7AC F TORPEDO V...................... 13..................9..........3760 90 3823 NQ 7AC F 1/4 WEDGE WW................... 10..................8..........3760 90 4397 NQ 7AC F 1/4 WEDGE WW................... 13..................8..........3760 90 4404 NQ 7SA TURBO........................... 10................. 10.........3760 90 2726 NQ 7SA TORPEDO V...................... 10..................9..........3760 90 2592 NQ 7SA TORPEDO V...................... 13..................9..........3760 90 1849 NQ 8AC CF............................... 10................. 10.........3760 90 4382 NQ 8AC CF............................... 13................. 10.........3760 90 4386 NQ 8AC ECF.............................. 10................. 11.........3760 90 4390 NQ 8AC ECF.............................. 13................. 11.........3760 90 4394 NQ 8AC TORPEDO V...................... 10..................9..........3760 90 4407 NQ 8AC TORPEDO V...................... 13..................9..........3760 90 3962 NQ 8AC 1/4 WEDGE WW................... 10..................8..........3760 90 4398 NQ 8AC 1/4 WEDGE WW................... 13..................8..........3760 90 4226 NQ 9AC CF............................... 10................. 10.........3760 90 4383 NQ 9AC CF............................... 13................. 10.........3760 90 3476 NQ 9AC ECF.............................. 10................. 11.........3760 90 4391 NQ 9AC ECF.............................. 13................. 11.........3760 90 3763 NQ 9AC TURBO........................... 13................. 10.........3760 90 4100 NQ 9AC TORPEDO V...................... 10..................9..........3760 90 3621 NQ 9AC TORPEDO V...................... 13..................9..........3760 90 3544 NQ 9AC 1/4 WEDGE WW................... 10..................8..........3760 90 4399 NQ 9AC 1/4 WEDGE WW................... 13..................8..........3760 90 4106 NQ 9H CF............................... 10................. 10.........3760 90 1310 NQ 10K CF............................... 10................. 10.........3760 90 2014 NQ 10K TORPEDO V...................... 10..................9..........3760 90 2193 NQ 11AC CF............................... 10................. 10.........3760 90 4384 NQ 11AC CF............................... 13................. 10.........3760 90 3477 NQ 11AC ECF.............................. 10..................9..........3760 90 3606 NQ 11AC ECF.............................. 13................. 11.........3760 90 3772 NQ 11AC ECF.............................. 13........ R....... 11.........3760 90 4227 NQ 11AC TURBO........................... 13................. 10.........3760 90 4101 NQ 11AC TORPEDO V...................... 10..................9..........3760 90 3620 NQ 11AC TORPEDO V...................... 13..................9..........3760 90 3399 NQ 11AC TORPEDO V...................... 13........ R........9..........3760 90 4267 NQ 11AC 1/4 WEDGE WW................... 10..................8..........3760 90 4400 NQ 11AC 1/4 WEDGE WW................... 13..................8..........3760 90 4107 NQ 12/14 CF............................... 10................. 10.........3760 90 2827 NQ 12/14 TURBO........................... 10................. 10.........3760 00 0104 NQ 12/14 1/4 WEDGE WW................... 10................. 10.........3760 90 0939 119

Double Tube NQ Double Tube continued NQ 13AC CF............................... 10................. 10.........3760 90 4385 NQ 13AC CF............................... 13................. 10.........3760 90 4095 NQ 13AC ECF.............................. 10................. 11.........3760 90 4392 NQ 13AC ECF.............................. 13................. 11.........3760 90 3808 NQ 13AC TURBO........................... 13................. 10.........3760 90 4102 NQ 13AC TORPEDO V...................... 10..................9..........3760 90 3659 NQ 13AC TORPEDO V...................... 13..................9..........3760 90 4002 NQ 13AC 1/4 WEDGE WW................... 10..................8..........3760 90 4401 NQ 13AC 1/4 WEDGE WW................... 13..................8..........3760 90 4108 NQ 14/15 CF............................... 10................. 10.........3760 00 0105 NQ 15AC ECF.............................. 13........ R....... 11.........3760 90 4266 NQ 15AC TORPEDO V...................... 13..................9..........3760 90 3421 HQ Double Tube HQ 2AC 5/16 WEDGE WW.................. 13................. 10.........3760 90 4121 HQ 3AC CF............................... 10................. 12.........3760 90 4486 HQ 3AC CF............................... 13................. 12.........3760 90 4492 HQ 3AC ECF.............................. 10................. 13.........3760 90 4494 HQ 3AC ECF.............................. 13................. 13.........3760 90 4502 HQ 3AC TORPEDO V...................... 10................. 11.........3760 90 4508 HQ 3AC TORPEDO V...................... 13................. 11.........3760 90 3480 HQ 3AC 5/16 WEDGE WW.................. 10................. 10.........3760 90 4504 HQ 3AC 5/16 WEDGE WW.................. 13................. 10.........3760 90 4507 HQ 3AC 5/16 WEDGE WW.................. 10........ R....... 10.........3760 90 3648 HQ 3AC 5/16 WEDGE WW.................. 13........ R....... 10.........3760 90 3819 HQ 3J 5/16 WEDGE WW.................. 10................. 10.........3760 90 2079 HQ 5AC CF............................... 10................. 12.........3760 90 4487 HQ 5AC CF............................... 13................. 12.........3760 90 4109 HQ 5AC ECF.............................. 10................. 13.........3760 90 4495 HQ 5AC ECF.............................. 13................. 13.........3760 90 4115 HQ 5AC TORPEDO V...................... 10................. 11.........3760 90 3629 HQ 5AC TORPEDO V...................... 13................. 11.........3760 90 4125 HQ 5AC 5/16 WEDGE WW.................. 10................. 10.........3760 90 3479 HQ 5AC 5/16 WEDGE WW.................. 10........ R....... 10.........3760 90 3820 HQ 5AC 5/16 WEDGE WW, 4140 GRADE BLANK 10........ R....... 10.........3760 90 3870 HQ 7AC CF............................... 10................. 12.........3760 90 3770 HQ 7AC CF............................... 13................. 12.........3760 90 4110 HQ 7AC ECF.............................. 10................. 13.........3760 90 4496 HQ 7AC ECF.............................. 13................. 13.........3760 90 4116 HQ 7AC TORPEDO V...................... 10................. 11.........3760 90 4509 HQ 7AC TORPEDO V...................... 13................. 11.........3760 90 3363 HQ 7AC 5/16 WEDGE WW.................. 10................. 10.........3760 90 4505 HQ 7AC 5/16 WEDGE WW.................. 13................. 10.........3760 90 4122 HQ 7AC F CF............................... 10................. 12.........3760 90 4488 HQ 7AC F CF............................... 13................. 12.........3760 90 4111 HQ 7AC F ECF.............................. 10................. 13.........3760 90 4497 HQ 7AC F ECF.............................. 13................. 13.........3760 90 4117 HQ 7AC F TORPEDO V...................... 10................. 11.........3760 90 4510 HQ 7AC F TORPEDO V...................... 13................. 11.........3760 90 3824 HQ 7AC F 5/16 WEDGE WW.................. 10................. 10.........3760 90 4506 HQ 7AC F 5/16 WEDGE WW.................. 13................. 10.........3760 90 3978 HQ 7SA TORPEDO V...................... 10................. 11.........3760 90 1410 10

Double Tube HQ Double Tube continued HQ 8A.2 CF............................... 10................. 12.........3760 90 1226 HQ 8AC CF............................... 10................. 12.........3760 90 4489 HQ 8AC CF............................... 13................. 12.........3760 90 4493 HQ 8AC ECF.............................. 10................. 13.........3760 90 4498 HQ 8AC ECF.............................. 13................. 13.........3760 90 4503 HQ 8AC TORPEDO V...................... 10................. 11.........3760 90 3957 HQ 8AC TORPEDO V...................... 13................. 11.........3760 90 3958 HQ 8AC 5/16 WEDGE WW.................. 10................. 10.........3760 90 3959 HQ 8AC 5/16 WEDGE WW.................. 13................. 10.........3760 90 3980 HQ 9AC CF............................... 10................. 12.........3760 90 3769 HQ 9AC CF............................... 13................. 12.........3760 90 4112 HQ 9AC ECF.............................. 10................. 13.........3760 90 4499 HQ 9AC ECF.............................. 13................. 13.........3760 90 4118 HQ 9AC TORPEDO V...................... 10................. 11.........3760 90 4511 HQ 9AC TORPEDO V...................... 13................. 11.........3760 90 3546 HQ 9AC 5/16 WEDGE WW.................. 10................. 10.........3760 90 3498 HQ 9AC 5/16 WEDGE WW.................. 13................. 10.........3760 90 3979 HQ 9H 5/16 WEDGE WW.................. 10................. 10.........3760 90 2130 HQ 10E4 5/16 WEDGE WW.................. 10..................8..........3760 90 0917 HQ 11AC CF............................... 10................. 12.........3760 90 4490 HQ 11AC CF............................... 13................. 12.........3760 90 4113 HQ 11AC ECF.............................. 10................. 13.........3760 90 4500 HQ 11AC ECF.............................. 13................. 13.........3760 90 4119 HQ 11AC TORPEDO V...................... 10................. 11.........3760 90 4512 HQ 11AC TORPEDO V...................... 13................. 11.........3760 90 3519 HQ 11AC 5/16 WEDGE WW.................. 10................. 10.........3760 90 4027 HQ 11AC 5/16 WEDGE WW.................. 10........ R....... 10.........3760 90 3499 HQ 11AC 5/16 WEDGE WW.................. 13................. 10.........3760 90 4123 HQ 12/14 CF............................... 10................. 12.........3760 00 0190 HQ 12/14 TURBO........................... 10................. 12.........3760 00 0191 HQ 12/14 5/16 WEDGE WW.................. 10................. 10.........3760 90 2946 HQ 12/14 5/16 WEDGE WW.................. 10........ R....... 10.........3760 90 2142 HQ 13AC CF............................... 10................. 12.........3760 90 4491 HQ 13AC CF............................... 13................. 12.........3760 90 4114 HQ 13AC ECF.............................. 10................. 13.........3760 90 4501 HQ 13AC ECF.............................. 13................. 13.........3760 90 4120 HQ 13AC TORPEDO V...................... 10................. 11.........3760 90 3663 HQ 13AC TORPEDO V...................... 13................. 11.........3760 90 4126 HQ 13AC 5/16 WEDGE WW.................. 10................. 10.........3760 90 3664 HQ 13AC 5/16 WEDGE WW.................. 13................. 10.........3760 90 4124 HQ 14/15 5/16 WEDGE WW.................. 10................. 12.........3760 00 0192 PQ Double Tube PQ 3AC CF............................... 10................. 14.........3760 90 4552 PQ 3AC 5/16 WEDGE WW.................. 10................. 12.........3760 90 4554 PQ 5AC 5/16 WEDGE WW.................. 10................. 12.........3760 90 4206 PQ 7AC F CF............................... 10................. 14.........3760 90 4198 PQ 7AC F 5/16 WEDGE WW.................. 10................. 12.........3760 90 4204 PQ 8AC CF............................... 10................. 14.........3760 90 4553 PQ 8AC 5/16 WEDGE WW.................. 10................. 12.........3760 90 4555 PQ 9AC CF............................... 10................. 14.........3760 90 4197 PQ 9AC 5/16 WEDGE WW.................. 10................. 12.........3760 90 4203 11

Double Tube Thin Wall PQ Double Tube continued PQ 11AC CF............................... 10................. 14.........3760 90 4196 PQ 11AC 5/16 WEDGE WW.................. 10................. 12.........3760 90 4202 PQ 13AC CF............................... 10................. 14.........3760 90 4195 PQ 13AC 5/16 WEDGE WW.................. 10................. 12.........3760 90 4201 AQTK Double Tube Thin Wall AQTK 7AC CF............................... 10..................8..........3760 90 3530 AQTK 7AC CF............................... 13..................8..........3760 90 4278 AQTK 7AC TORPEDO V...................... 10..................7..........3760 90 3985 AQTK 7AC TORPEDO V...................... 13..................7..........3760 90 4285 AQTK 7AC F CF............................... 13..................8..........3760 90 3935 AQTK 7AC F TORPEDO V...................... 13..................7..........3760 90 3862 AQTK 8AC CF............................... 10..................8..........3760 90 4275 AQTK 8AC CF............................... 13..................8..........3760 90 4279 AQTK 8AC TORPEDO V...................... 10..................7..........3760 90 4282 AQTK 8AC TORPEDO V...................... 13..................7..........3760 90 3948 AQTK 9AC CF............................... 10..................8..........3760 90 4276 AQTK 9AC CF............................... 13..................8..........3760 90 4280 AQTK 9AC TORPEDO V...................... 10..................7..........3760 90 4283 AQTK 9AC TORPEDO V...................... 13..................7..........3760 90 4286 AQTK 11AC CF............................... 10..................8..........3760 90 4277 AQTK 11AC CF............................... 13..................8..........3760 90 4281 AQTK 11AC CF............................... 13..................8..........3760 90 3936 AQTK 11AC TORPEDO V...................... 10..................7..........3760 90 4284 AQTK 11AC TORPEDO V...................... 13..................7..........3760 90 3906 AOTW Double Tube Thin Wall AOTW 7AC CF............................... 10..................8..........3760 90 4287 AOTW 7AC CF............................... 13..................8..........3760 90 4291 AOTW 7AC TURBO........................... 10..................8..........3760 90 3291 AOTW 7AC TORPEDO V...................... 10..................7..........3760 90 3798 AOTW 7AC F TURBO........................... 10..................8..........3760 90 3176 AOTW 7AC F TURBO........................... 13..................7..........3760 90 3942 AOTW 7AA CF............................... 13..................8..........3760 90 2568 AOTW 7AA TURBO........................... 10..................8..........3760 90 0741 AOTW 7C TURBO........................... 10..................8..........3760 90 1318 AOTW 8AC CF............................... 10..................8..........3760 90 4288 AOTW 8AC CF............................... 13..................8..........3760 90 4292 AOTW 8AC TORPEDO V...................... 10..................7..........3760 90 4295 AOTW 8AC TORPEDO V...................... 13..................7..........3760 90 4299 AOTW 9AC CF............................... 10..................8..........3760 90 4289 AOTW 9AC CF............................... 13..................8..........3760 90 4293 AOTW 9AC TORPEDO V...................... 10..................7..........3760 90 4296 AOTW 9AC TORPEDO V...................... 13..................7..........3760 90 4300 AOTW 11AC CF............................... 10..................8..........3760 90 4290 AOTW 11AC CF............................... 13..................8..........3760 90 4294 AOTW 11AC TORPEDO V...................... 10..................7..........3760 90 4297 AOTW 11AC TORPEDO V...................... 13..................7..........3760 90 4301 AOTW 13AC TURBO........................... 10..................8..........3760 90 4423 12

Double Tube Thin Wall BQTK Double Tube Thin Wall BQTK 3AC CF............................... 13........ R........8..........3760 90 4272 BQTK 3AC TORPEDO V...................... 13..................7..........3760 90 3931 BQTK 5AC CF............................... 10..................8..........3760 90 4342 BQTK 5AC CF............................... 13..................8..........3760 90 4350 BQTK 5AC CF............................... 13........ R........8..........3760 90 4271 BQTK 5AC ECF.............................. 10..................9..........3760 90 4255 BQTK 5AC ECF.............................. 13..................9..........3760 90 4374 BQTK 5AC TORPEDO V...................... 10..................7..........3760 90 4358 BQTK 5AC TORPEDO V...................... 13..................7..........3760 90 4366 BQTK 7AC CF............................... 10..................8..........3760 90 4343 BQTK 7AC CF............................... 13..................8..........3760 90 4351 BQTK 7AC ECF.............................. 10..................7..........3760 90 3613 BQTK 7AC ECF.............................. 13..................9..........3760 90 4375 BQTK 7AC TORPEDO V...................... 10..................7..........3760 90 4359 BQTK 7AC TORPEDO V...................... 13..................7..........3760 90 3600 BQTK 7AC F CF............................... 10..................8..........3760 90 4344 BQTK 7AC F CF............................... 13..................8..........3760 90 4352 BQTK 7AC F ECF.............................. 10..................9..........3760 90 4369 BQTK 7AC F ECF.............................. 13..................9..........3760 90 4376 BQTK 7AC F TORPEDO V...................... 10..................7..........3760 90 4360 BQTK 7AC F TORPEDO V...................... 13..................7..........3760 90 4367 BQTK 7SA TORPEDO V...................... 13..................7..........3760 90 3089 BQTK 8AC CF............................... 10..................8..........3760 90 4345 BQTK 8AC CF............................... 13..................8..........3760 90 4353 BQTK 8AC ECF.............................. 10..................9..........3760 90 4370 BQTK 8AC ECF.............................. 13..................9..........3760 90 3986 BQTK 8AC TORPEDO V...................... 10..................7..........3760 90 4361 BQTK 8AC TORPEDO V...................... 13..................7..........3760 90 3953 BQTK 9AC CF............................... 10..................8..........3760 90 4346 BQTK 9AC CF............................... 13..................8..........3760 90 4354 BQTK 9AC ECF.............................. 10..................7..........3760 90 3612 BQTK 9AC TORPEDO V...................... 10..................7..........3760 90 4362 BQTK 9AC TORPEDO V...................... 13..................7..........3760 90 3848 BQTK 11AC CF............................... 10..................8..........3760 90 4347 BQTK 11AC CF............................... 13..................8..........3760 90 4355 BQTK 11AC ECF.............................. 10..................9..........3760 90 4371 BQTK 11AC ECF.............................. 13..................9..........3760 90 3874 BQTK 11AC TORPEDO V...................... 10..................7..........3760 90 4363 BQTK 13AC CF............................... 10..................8..........3760 90 4348 BQTK 13AC CF............................... 13..................8..........3760 90 4356 BQTK 13AC ECF.............................. 10..................9..........3760 90 4372 BQTK 13AC ECF.............................. 13..................9..........3760 90 3929 BQTK 13AC TORPEDO V...................... 10..................7..........3760 90 4364 BQTK 13AC TORPEDO V...................... 13..................7..........3760 90 3930 BQTK 15AC CF............................... 10..................8..........3760 90 4349 BQTK 15AC CF............................... 13..................8..........3760 90 4357 BQTK 15AC ECF.............................. 10..................9..........3760 90 4373 BQTK 15AC ECF.............................. 13..................9..........3760 90 4378 BQTK 15AC TORPEDO V...................... 10..................7..........3760 90 4365 BQTK 15AC TORPEDO V...................... 13..................7..........3760 90 4368 13

Double Tube Thin Wall BOTW Double Tube Thin Wall BOTW 3J CF............................... 10..................8..........3760 90 2821 BOTW 3J CF............................... 13..................8..........3760 90 4043 BOTW 7AC CF............................... 13..................8..........3760 90 4065 BOTW 7AC 1/4 WEDGE WW................... 13..................8..........3760 90 4063 BOTW 8AC CF............................... 13..................8..........3760 90 4066 BOTW 8AC 1/4 WEDGE WW................... 13..................8..........3760 90 4064 BOTW 9AC CF............................... 13..................8..........3760 90 4248 BOTW 9AC TURBO........................... 10..................8..........3760 90 3710 BOTW 11AC TURBO........................... 10..................8..........3760 90 3711 BOTW 11AC 3/16 WEDGE WW.................. 13..................8..........3760 90 3598 NQ2 Double Tube Thin Wall NQ2 3AC TORPEDO V...................... 13..................9..........3760 90 3447 NQ2 3AC 1/4 WEDGE WW................... 10........ R........8..........3760 90 4425 NQ2 5AC CF............................... 10................. 10.........3760 90 4442 NQ2 5AC CF............................... 10........ R....... 10.........3760 90 4245 NQ2 5AC CF............................... 13................. 10.........3760 90 4135 NQ2 5AC ECF.............................. 10................. 11.........3760 90 4449 NQ2 5AC ECF.............................. 10........ R....... 11.........3760 90 4254 NQ2 5AC ECF.............................. 13................. 11.........3760 90 4127 NQ2 5AC TORPEDO V...................... 10..................9..........3760 90 4464 NQ2 5AC TORPEDO V...................... 13..................9..........3760 90 3523 NQ2 5AC 1/4 WEDGE WW................... 10..................8..........3760 90 4457 NQ2 5AC 1/4 WEDGE WW................... 10........ R........8..........3760 90 3639 NQ2 5AC 1/4 WEDGE WW................... 13..................8..........3760 90 4133 NQ2 5AC 1/4 WEDGE WW................... 13........ R........8..........3760 90 4426 NQ2 7AC CF............................... 10................. 10.........3760 90 3697 NQ2 7AC CF............................... 13................. 10.........3760 90 4136 NQ2 7AC ECF.............................. 10................. 11.........3760 90 4450 NQ2 7AC ECF.............................. 13................. 11.........3760 90 4128 NQ2 7AC TORPEDO V...................... 10..................9..........3760 90 4465 NQ2 7AC TORPEDO V...................... 13..................9..........3760 90 3415 NQ2 7AC 1/4 WEDGE WW................... 10..................8..........3760 90 4458 NQ2 7AC 1/4 WEDGE WW................... 13..................8..........3760 90 3505 NQ2 7AC F CF............................... 10................. 10.........3760 90 4443 NQ2 7AC F CF............................... 13................. 10.........3760 90 4137 NQ2 7AC F ECF.............................. 10................. 11.........3760 90 4451 NQ2 7AC F ECF.............................. 13................. 11.........3760 90 4129 NQ2 7AC F TORPEDO V...................... 10..................9..........3760 90 4466 NQ2 7AC F TORPEDO V...................... 13..................9..........3760 90 4021 NQ2 7AC F 1/4 WEDGE WW................... 10..................8..........3760 90 4459 NQ2 7AC F 1/4 WEDGE WW................... 13..................8..........3760 90 4018 NQ2 7SA TORPEDO V...................... 10..................9..........3760 90 3038 NQ2 8A.2 CF............................... 10................. 10.........3760 90 1097 NQ2 8A.2 1/4 WEDGE WW................... 10..................8..........3760 90 1240 NQ2 8A.4 1/4 WEDGE WW................... 13..................8..........3760 90 2637 NQ2 8AC CF............................... 10................. 10.........3760 90 4444 NQ2 8AC CF............................... 13................. 10.........3760 90 4448 NQ2 8AC ECF.............................. 10................. 11.........3760 90 4452 NQ2 8AC ECF.............................. 13................. 11.........3760 90 4456 NQ2 8AC TORPEDO V...................... 10..................9..........3760 90 4467 NQ2 8AC TORPEDO V...................... 13..................9..........3760 90 4022 14

Double Tube Thin Wall NQ2 Double Tube Thin Wall continued NQ2 8AC 1/4 WEDGE WW................... 10..................8..........3760 90 4460 NQ2 8AC 1/4 WEDGE WW................... 13..................8..........3760 90 4019 NQ2 9AC CF............................... 10................. 10.........3760 90 4445 NQ2 9AC CF............................... 13................. 10.........3760 90 4138 NQ2 9AC ECF.............................. 10................. 11.........3760 90 4453 NQ2 9AC ECF.............................. 13................. 11.........3760 90 4130 NQ2 9AC TORPEDO V...................... 10..................9..........3760 90 4468 NQ2 9AC TORPEDO V...................... 13..................9..........3760 90 3292 NQ2 9AC 1/4 WEDGE WW................... 10..................8..........3760 90 4461 NQ2 9AC 1/4 WEDGE WW................... 13..................8..........3760 90 4134 NQ2 11AC CF............................... 10................. 10.........3760 90 4446 NQ2 11AC CF............................... 13................. 10.........3760 90 4139 NQ2 11AC ECF.............................. 10................. 11.........3760 90 4454 NQ2 11AC ECF.............................. 13................. 11.........3760 90 4131 NQ2 11AC TORPEDO V...................... 10..................9..........3760 90 4469 NQ2 11AC TORPEDO V...................... 13..................9..........3760 90 3524 NQ2 11AC 1/4 WEDGE WW................... 10..................8..........3760 90 4462 NQ2 11AC 1/4 WEDGE WW................... 13..................8..........3760 90 4010 NQ2 12/14 CF............................... 10................. 10.........3760 90 2048 NQ2 12/14 TURBO........................... 10................. 10.........3760 90 2049 NQ2 13AC CF............................... 10................. 10.........3760 90 4447 NQ2 13AC CF............................... 13................. 10.........3760 90 4140 NQ2 13AC ECF.............................. 10................. 11.........3760 90 4455 NQ2 13AC ECF.............................. 13................. 11.........3760 90 4132 NQ2 13AC TORPEDO V...................... 10..................9..........3760 90 3661 NQ2 13AC TORPEDO V...................... 13..................9..........3760 90 4023 NQ2 13AC 1/4 WEDGE WW................... 10..................8..........3760 90 4463 NQ2 13AC 1/4 WEDGE WW................... 13..................8..........3760 90 4020 NQ2 14/15 CF............................... 10................. 10.........3760 90 2050 15

Triple Tube NQ3 Triple Tube NQ3 5AC CF............................... 10................. 10.........3760 90 4470 NQ3 5AC CF............................... 13................. 10.........3760 90 4182 NQ3 5AC 1/4 WEDGE WW................... 10..................8..........3760 90 4478 NQ3 5AC 1/4 WEDGE WW................... 13..................8..........3760 90 4188 NQ3 7AC CF............................... 10................. 10.........3760 90 4471 NQ3 7AC CF............................... 13................. 10.........3760 90 4181 NQ3 7AC 1/4 WEDGE WW................... 10..................8..........3760 90 4479 NQ3 7AC 1/4 WEDGE WW................... 13..................8..........3760 90 4422 NQ3 7AC F CF............................... 10................. 10.........3760 90 4472 NQ3 7AC F CF............................... 13................. 10.........3760 90 4180 NQ3 7AC F 1/4 WEDGE WW................... 10..................8..........3760 90 4480 NQ3 7AC F 1/4 WEDGE WW................... 13..................8..........3760 90 4186 NQ3 8AC CF............................... 10................. 10.........3760 90 4473 NQ3 8AC CF............................... 13................. 10.........3760 90 4477 NQ3 8AC TORPEDO V...................... 10..................9..........3760 90 3964 NQ3 8AC 1/4 WEDGE WW................... 10..................8..........3760 90 4481 NQ3 8AC 1/4 WEDGE WW................... 13..................8..........3760 90 4485 NQ3 9AC CF............................... 10................. 10.........3760 90 4474 NQ3 9AC CF............................... 13................. 10.........3760 90 4179 NQ3 9AC 1/4 WEDGE WW................... 10..................8..........3760 90 4482 NQ3 9AC 1/4 WEDGE WW................... 13..................8..........3760 90 4185 NQ3 11AC CF............................... 10................. 10.........3760 90 4475 NQ3 11AC CF............................... 13................. 10.........3760 90 4178 NQ3 11AC 1/4 WEDGE WW................... 10..................8..........3760 90 4483 NQ3 11AC 1/4 WEDGE WW................... 13..................8..........3760 90 4184 NQ3 13AC CF............................... 10................. 10.........3760 90 4476 NQ3 13AC CF............................... 13................. 10.........3760 90 4177 NQ3 13AC 1/4 WEDGE WW................... 10..................8..........3760 90 4484 NQ3 13AC 1/4 WEDGE WW................... 13..................8..........3760 90 4183 HQ3 Triple Tube HQ3 3AC CF............................... 10................. 12.........3760 90 4513 HQ3 3AC CF............................... 13................. 12.........3760 90 4521 HQ3 3AC TORPEDO V...................... 10................. 11.........3760 90 4533 HQ3 3AC TORPEDO V...................... 13................. 11.........3760 90 4541 HQ3 3AC 5/16 WEDGE WW.................. 10................. 10.........3760 90 4523 HQ3 3AC 5/16 WEDGE WW.................. 13................. 10.........3760 90 4531 HQ3 5AC CF............................... 10................. 12.........3760 90 4514 HQ3 5AC CF............................... 13................. 12.........3760 90 4146 HQ3 5AC TORPEDO V...................... 10................. 11.........3760 90 4534 HQ3 5AC TORPEDO V...................... 13................. 11.........3760 90 4542 HQ3 5AC 5/16 WEDGE WW.................. 10................. 10.........3760 90 4524 HQ3 5AC 5/16 WEDGE WW.................. 13................. 12.........3760 90 4158 HQ3 7AC CF............................... 10................. 12.........3760 90 4515 HQ3 7AC CF............................... 13................. 12.........3760 90 4145 HQ3 7AC TORPEDO V...................... 10................. 11.........3760 90 4535 HQ3 7AC TORPEDO V...................... 13................. 11.........3760 90 3778 HQ3 7AC 5/16 WEDGE WW.................. 13................. 12.........3760 90 4157 HQ3 7AC F CF............................... 10................. 12.........3760 90 4516 HQ3 7AC F CF............................... 13................. 12.........3760 90 4144 HQ3 7AC F TORPEDO V...................... 10................. 11.........3760 90 4536 HQ3 7AC F TORPEDO V...................... 13................. 11.........3760 90 4543 16

Triple Tube HQ3 Triple Tube continued HQ3 7AC F 5/16 WEDGE WW.................. 10................. 10.........3760 90 4526 HQ3 7AC F 5/16 WEDGE WW.................. 13................. 12.........3760 90 4156 HQ3 8AC CF............................... 10................. 12.........3760 90 4517 HQ3 8AC CF............................... 13................. 12.........3760 90 4522 HQ3 8AC TORPEDO V...................... 10................. 11.........3760 90 4537 HQ3 8AC TORPEDO V...................... 13................. 11.........3760 90 4544 HQ3 8AC 5/16 WEDGE WW.................. 10................. 10.........3760 90 4527 HQ3 8AC 5/16 WEDGE WW.................. 13................. 10.........3760 90 4532 HQ3 9AC CF............................... 10................. 12.........3760 90 4518 HQ3 9AC TORPEDO V...................... 10................. 11.........3760 90 4538 HQ3 9AC TORPEDO V...................... 13................. 11.........3760 90 4545 HQ3 9AC 5/16 WEDGE WW.................. 10................. 10.........3760 90 4528 HQ3 11AC CF............................... 10................. 12.........3760 90 4519 HQ3 11AC TORPEDO V...................... 10................. 11.........3760 90 4539 HQ3 11AC TORPEDO V...................... 13................. 11.........3760 90 4546 HQ3 11AC 5/16 WEDGE WW.................. 10................. 10.........3760 90 4529 HQ3 11AC 5/16 WEDGE WW.................. 13................. 12.........3760 90 4154 HQ3 12/14 TURBO........................... 10................. 12.........3760 00 0211 HQ3 13AC CF............................... 10................. 12.........3760 90 4520 HQ3 13AC TORPEDO V...................... 10................. 11.........3760 90 4540 HQ3 13AC TORPEDO V...................... 13................. 11.........3760 90 4547 HQ3 13AC 5/16 WEDGE WW.................. 10................. 10.........3760 90 4530 HQ3 14/15 CF............................... 10................. 12.........3760 00 0212 PQ3 Triple Tube PQ3 3AC CF............................... 10................. 14.........3760 90 4556 PQ3 3AC 5/16 WEDGE WW.................. 10................. 12.........3760 90 4561 PQ3 5AC CF............................... 10................. 14.........3760 90 4557 PQ3 5AC 5/16 WEDGE WW.................. 10................. 12.........3760 90 4562 PQ3 7AC CF............................... 10................. 14.........3760 90 4558 PQ3 7AC 5/16 WEDGE WW.................. 10................. 12.........3760 90 4563 PQ3 7AC F CF............................... 10................. 14.........3760 90 4559 PQ3 7AC F 5/16 WEDGE WW.................. 10................. 12.........3760 90 4564 PQ3 8AC CF............................... 10................. 14.........3760 90 4560 PQ3 8AC 5/16 WEDGE WW.................. 10................. 12.........3760 90 4565 PQ3 9AC CF............................... 10................. 14.........3760 90 3965 PQ3 9AC 5/16 WEDGE WW.................. 10................. 12.........3760 90 4566 PQ3 11AC CF............................... 10................. 14.........3760 90 4216 PQ3 11AC 5/16 WEDGE WW.................. 10................. 12.........3760 90 4567 PQ3 13AC CF............................... 10................. 14.........3760 90 3966 PQ3 13AC 5/16 WEDGE WW.................. 10................. 12.........3760 90 4568 17