Pack 12349 20 Designs Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen. HG654_48 Eagle & Liberty Bell Appliqué 4.72 X 5.79 in. 119.89 X 147.07 mm 8,127 St. zr L HG655_48 Stamp Appliqué 4.73 X 3.50 in. 120.14 X 88.90 mm 5,318 St. zr HG656_48 Small Star Corner Appliqué 2.57 X 2.53 in. 65.28 X 64.26 mm 1,941 St. zr HG657_48 Eagle Appliqué 4.76 X 5.65 in. 120.90 X 143.51 mm 2,168 St. z L HG658_48 Liberty Patch Appliqué 4.06 X 4.13 in. 103.12 X 104.90 mm 4,969 St. zr HG659_48 Liberty & Shield Appliqué 4.47 X 6.10 in. 113.54 X 154.94 mm 11,006 St. zr L HG660_48 Let Freedom Ring Appliqué 4.75 X 6.19 in. 120.65 X 157.23 mm 10,092 St. zr L HG661_48 Appliqué Patch Frame 3.40 X 4.24 in. 86.36 X 107.70 mm 4,685 St. zr HG662_48 Eagle Shield Appliqué 1.98 X 2.50 in. 50.29 X 63.50 mm 3,520 St. z HG663_48 Appliqué Flag 3.48 X 6.49 in. 88.39 X 164.85 mm 6,591 St. z L HG664_48 Land of the Free 3.12 X 3.81 in. 79.25 X 96.77 mm 3,718 St. R HG665_48 Statue of Liberty 2.36 X 6.72 in. 59.94 X 170.69 mm 5,523 St. zr L
Pack 12349 20 Designs Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen. HG666_48 Eagle Head Linework 2.46 X 2.52 in. 62.48 X 64.01 mm 1,692 St. R HG667_48 Waving Flag 4.26 X 5.67 in. 108.20 X 144.02 mm 6,160 St. zr L HG668_48 We the People 4.46 X 3.98 in. 113.28 X 101.09 mm 5,519 St. R HG669_48 Background Linework 1 3.09 X 3.80 in. 78.49 X 96.52 mm 2,962 St. R HG670_48 Background Linework 2 2.75 X 2.61 in. 69.85 X 66.29 mm 1,820 St. R HG671_48 Background Linework 3 2.34 X 3.57 in. 59.44 X 90.68 mm 2,558 St. R HG672_48 Small Star Border 3.26 X 1.18 in. 82.80 X 29.97 mm 2,988 St. R S HG673_48 Jumbo Land of Liberty 6.61 X 8.09 in. 167.89 X 205.49 mm 18,277 St. zr L
Pack 12349 20 Designs Listings below indicate color sample, stitching order and suggested thread color number in Isacord, YLI Fine Metallic, Yenmet or YLI Variegated threads. HG654_48 Eagle & Liberty Bell Appliqué n 1. Light Gray Linework... 0131 n 2. Dark Gray Eagle Linework... 0138 n 3. Bell Placement Stitch... 0131 n 4. Bell Cover Stitch... 0131 n 5. Bell Details... 0131 n 6. Yoke Placement Stitch... 3444 n 7. Yoke Cover Stitch... 3444 HG655_48 Stamp Appliqué n 1. Light Gray Linework... 0131 n 2. Stamp Placement Stitch... 3444 n 3. Stamp Cover Stitch... 3444 n 4. Dark Gray Seal and Lines... 0138 HG656_48 Small Star Corner Appliqué n 1. Dark Gray Linework... 0138 n 2. Star Placement Stitch... 3444 n 3. Star Placement Stitch... 3444 HG657_48 Eagle Appliqué n 1. Eagle Placement Stitch... 0131 n 2. Eagle Tackdown... 0131 n 3. Beak and Talons... 0138 HG658_48 Liberty Patch Appliqué n 1. Upper Shield Placement Stitch... 3444 n 2. Lower Shield Placement Stitch... 3444 n 3. Shield Cover Stitch... 3444 n 4. Shield Detail... 0131 n 5. Word and Linework... 0138 HG659_48 Liberty & Shield Appliqué n 1. Dark Gray Linework... 0138 n 2. Red Linework... 1902 n 3. Shield Placement Stitch... 3444 n 4. Shield Cover Stitch... 3444 n 5. Light Gray Shield Detail... 0131 HG660_48 Let Freedom Ring Appliqué n 1. Dark Gray Linework... 0138 n 2. Placement Stitch... 0131 n 3. Tackdown... 0131 n 4. Words... 0131 HG661_48 Appliqué Patch Frame n 1. Patch Placement Stitch... 3444 n 2. Patch Cover Stitch... 3444 n 3. Light Gray Spots... 0131 n 4. Dark Gray Linework... 0138 HG662_48 Eagle Shield Appliqué n 1. Placement Stitch... 0131 n 2. Tackdown... 0131 n 3. Eagle... 0131 HG663_48 Appliqué Flag n 1. Stripes Background Placement Stitch... 3444 n 2. Stars Background Placement Stitch... 3444 n 3. Flag Cover Stitch... 3444 n 4. Stars & Stripes... 0131 HG664_48 Land of the Free HG665_48 Statue of Liberty HG666_48 Eagle Head Linework HG667_48 Waving Flag HG668_48 We the People HG669_48 Background Linework 1 HG670_48 Background Linework 2 HG671_48 Background Linework 3 HG672_48 Small Star Border HG673_48 Jumbo Land of Liberty n 1. Dark Gray Linework... 0138 n 2. Placement Stitch... 0131 n 3. Tackdown... 0131 n 4. Words... 0131 NOTE: Appliqué Fabric Not Included
Appliqué Instructions 1. Print out the necessary pages from the PDF of the appliquè pattern(s). 2. Mark the right side of the pattern pieces so you ll know which direction to lay the pattern on the fabric. 3. Lightly spray the wrong side of the pattern pieces with temporary adhesive spray and allow it to set for a few minutes. 4. Place the pattern pieces on the right side of the fabric and carefuly cut them out. PHOTO 1 5. Sew the placement stitch on you hooped fabcric. PHOTO 2 6. With the paper still stuck to the right side of the appliqué fabric, spray the wrong side of the fabric with temporary spray adhesive. 7. Place the fabric inside the sewing placement stitch so that it matches the stitching line then remove the paper pattern. PHOTO 3 8. Sew the tackdown. PHOTO 4 9. Sew the remainder of the design and repeat for any remaining pieces. PHOTO 5 NOTE: The patterns are sized for the designs as they were made. If you resize the design, you will need to resize the pattern the same amount. You can print out the pattern at the normal size then copy it on a copy machine at the changed size, i.e. resize the designs to 80%, resize the printed pattern to 80%. TIP: When Printing the patterns, make sure that the Fit to page option is UNCHECKED in the Print Dialog Box. If this option is checked the printed patterns will not be actual size. 1 2 3 4 5
printer s
Appliqué Patterns
Appliqué Patterns
Pre-cut appliqué files for use with BERNINA HG654_48_CWA01 For use with the 3.11 X 3.00 in. 78.99 X 76.20 mm 1,785 St. HG654_48_CWA02 For use with the 3.22 X 2.03 in. 81.79 X 51.56 mm 1,586 St. HG655_48_CWA For use with the 2.85 X 2.83 in. 72.39 X 71.88 mm 1,440 St. HG656_48_CWA For use with the 2.20 X 2.18 in. 55.88 X 55.37 mm 1,320 St. HG657_48_CWA For 5.33 X 6.13 in. 135.38 X 155.70 mm 5,362 St. L HG658_48_CWA01 For 2.63 X 2.57 in. 66.80 X 65.28 mm 1,575 St. HG658_48_CWA02 For 2.30 X 1.86 in. 58.42 X 47.24 mm 1,098 St. HG659_48_CWA For 2.80 X 3.33 in. 71.12 X 84.58 mm 1,840 St. HG660_48_CWA For 2.75 X 3.53 in. 69.85 X 89.66 mm 1,876 St. HG661_48_CWA For 2.75 X 2.75 in. 69.85 X 69.85 mm 1,523 St. HG662_48_CWA For 2.41 X 2.99 in. 61.21 X 75.95 mm 1,457 St. HG663_48_CWA01 For 3.92 X 6.90 in. 99.57 X 175.26 mm 3,471 St. L HG663_48_CWA02 For 2.39 X 3.72 in. 60.71 X 94.49 mm 1,862 St. HG673_48_CWA For 4.38 X 7.07 in. 111.25 X 179.58 mm 3,412 St. L
Pre-cut appliqué files for use with BERNINA NOTE: Placement Stitch and Basting Stitch should match your background fabric. HG654_48_CWA01 For use with the n 3. Cut 1...Cut 1 n 4. Cut 2...Cut 2 n 5. Cut 3...Cut 3 n 6. Cut 4...Cut 4 HG654_48_CWA02 For use with the n 3. Cut 1...Cut 1 n 4. Cut 2...Cut 2 n 5. Cut 3...Cut 3 n 6. Cut 4...Cut 4 HG655_48_CWA For use with the n 3. Cut 1...Cut 1 n 4. Cut 3...Cut 3 HG656_48_CWA For use with the n 3. Cut 1...Cut 1 n 4. Cut 2...Cut 2 n 5. Cut 3...Cut 3 n 6. Cut 4...Cut 4 HG657_48_CWA For use with the n 3. Cut 1...Cut 1 n 4. Cut 2...Cut 2 n 5. Cut 3...Cut 3 n 6. Cut 4...Cut 4 HG658_48_CWA01 For use with the n 3. Cut 1...Cut 1 n 4. Cut 2...Cut 2 n 5. Cut 3...Cut 3 n 6. Cut 4...Cut 4 HG658_48_CWA02 For use with the n 3. Cut 1...Cut 1 n 4. Cut 2...Cut 2 n 5. Cut 3...Cut 3 n 6. Cut 4...Cut 4 HG659_48_CWA For use with the n 3. Cut 1...Cut 1 n 4. Cut 2...Cut 2 n 5. Cut 3...Cut 3 n 6. Cut 4...Cut 4 HG660_48_CWA For use with the n 3. Cut 1...Cut 1 n 4. Cut 2...Cut 2 n 5. Cut 3...Cut 3 n 6. Cut 4...Cut 4 HG661_48_CWA For use with the n 3. Cut 1...Cut 1 n 4. Cut 2...Cut 2 n 5. Cut 3...Cut 3 n 6. Cut 4...Cut 4 HG662_48_CWA For use with the n 3. Cut 1...Cut 1 n 4. Cut 2...Cut 2 n 5. Cut 3...Cut 3 n 6. Cut 4...Cut 4 HG663_48_CWA01 For use with the n 3. Cut 1...Cut 1 n 4. Cut 3...Cut 3 HG663_48_CWA02 For use with the n 3. Cut 1...Cut 1 n 4. Cut 3...Cut 3 HG673_48_CWA For use with the n 3. Cut 1...Cut 1 n 4. Cut 2...Cut 2 n 5. Cut 3...Cut 3 n 6. Cut 4...Cut 4
Making Precut Appliqué Using BERNINA Cutwork Accessory SUPPLIES Cut-Away Stabilizer Temporary Spray Adhesive Appliqué Fuse & Fix Stabilizer Embroidery Thread Stabilizer that is appropriate for your project BERNINA 1. 2. 3. PREPARE APPLIQUE FABRIC Starch appliqué fabric 2-3 times following manufacturer s instructions. Appliqué fabric should be crisp. Iron Appliqué Fuse & Fix to the wrong side of the starched appliqué fabric following instructions on product packaging. CUT APPLIQUÉ PIECES 1. Hoop one layer of Cut-Away Stabilizer. 2. Send first CWA file to the embroidery machine. (CWA files are the pre-cut appliqué files to use with the ; these files will end in CWA01, CWA02, and CWA03 etc. The number of CWA files available for each design will depend upon how many separate appliqués each design contains.) 3. Stitch the first color, this will be the placement stitch. 4. Remove the hoop from the machine but do not remove the stabilizer from the hoop. Spray the hooped stabilizer with temporary spray adhesive. Lay prepared appliqué fabric over the placement stitch, being sure to completely cover the stitching. Apply pressure to appliqué fabric to ensure it is adhered. 5. Stitch the second color, this will be the basting stitch. It is meant to baste the appliqué fabric to your hooped stabilizer. 6. Replace normal stitch plate with the CutWork stitch plate. 7. Unthread the machine. 8. If necessary, turn off the upper thread control on your machine. Refer to your machine s user manual. Note that the most recent version of the 830 will perform this task automatically. 9. Replace embroidery needle with the. 10. Replace embroidery foot with foot #44 (If you do not have foot #44 you can leave foot #15 on the machine; foot #44 will simply keep the cut fabric from flagging as much). PHOTO 1 11. Attach the hoop to the machine. 12. To cut the first appliqué piece follow the thread changes on your machine screen and turn the dial on the CutWork tool as required. 13. Remove the hoop from the machine. 14. Gently remove cut appliqué piece, trimming any thread that may have not been cut completely. PHOTO 1 15. Repeat as needed for designs with multiple appliqué pieces. 1. 2. 3. 4. 5. 6. 7. TACkdOwn APPLIQUÉ And COmPLETE EmBROIdERy design Replace the embroidery needle and rethread the machine. Replace the embroidery foot #15. Spray hoop sized piece of stabilizer that is appropriate for your project and adhere to wrong side of background fabric or project that is to be hooped. Hoop fabric/project and stabilizer. Attach hoop to machine. Send the embroidery file to the machine (this is not a CWA file). Stitch design as normal following the thread changes on the provided thread chart stopping after each Appliqué Placement Stitch.
Making Precut Appliqué Using BERNINA Cutwork Accessory 1. 2. 3. 4. 5. After stitching an Appliqué Placement Stitch, take the precut appliqué pieces required and peel off the cutaway backing and the release paper revealing a sticky backing. PHOTO 2 Remove hoop from machine, but do not remove the fabric from the hoop. Adhere precut appliqué piece evenly over the Appliqué Placement Stitch; use pressure to make sure pieces stick well. PHOTO 3 Reattach hoop to machine. Continue stitching design until all appliqué pieces are placed and all stitching is complete. PHOTO 4 PHOTO 2 note: design pictured is for instructional purposes and may not be included in this collection. PHOTO 3 PHOTO 4