Frameless Glass Fence and Balustrade Fittings Spiggot 200 Enhance Your View
Stainless Steel Clamps The Products Häfele now introduces a range of glass panel fittings for frameless glass fencing. This new group of products complements the comprehensive Häfele architectural glass product range, which architects and designers have been specifying throughout the world. This new range of glass fittings include; Dulplex 2205 grade stainless steel clamps Glass to glass pivots Wall to glass pivots Patch locks for gates Patch fittings Floor springs and sealing compound Extended spindles for floor springs The Features Duplex 2205 grade stainless steel, the new alternative to 316 stainless steel, is ideal for waterfront constructions and pool areas. Duplex 2205 grade performs better than 316 stainless and offers the following benefits; Corrosion Resistance Having a superior corrosion resistance to 316, Duplex 2205 performs well in most environments where standard austentic stainless steel may fail. 2205 s low carbon content results in a high resistance to intergranular corrosion, and higher resistance to uniform pitting, crevice corrosion and tea staining. Stress Corrosion Resistance As 2205 is a duplex stainless steel, the grade is less sensitive than austenic stainless steel to corrosion cracking in warm chlorine environments. A good resistance has been shown when exposed to hydrogen sulphide in chlorine solutions. The Facts For very aggressive applications (eg. splashed by sea water), unwashed areas, rough surfaces or those applications where no staining can be tolerated, higher grades or stainless steel such as Duplex 2205 are preferred The Australian Stainless Steel Association. Contents Page Stainless Steel Clamps..................1-3 Fittings for Gates......................4-6 Patch Fittings for Gates.................7 Floor Springs for Gates.................8 Floor Spring Accessories................ SB 200 HAA www.hafele.com
Stainless Steel Clamps Stainless steel clamp Square Base cover Square 4.5 x 45º 45º Ø102 52 51 20 M10 countersunk head screw 53 R2 25 45 4.5 125 Cover for clamp base Duplex 2205 grade stainless steel 60 40 24 Frameless glass pool fencing Duplex 2205 grade stainless steel 10 mm, 12 mm and 15 mm Clamp fixing with hexagon bolt Satin 81.45.030 Polished 81.45.031 25 mm holes on bottom 25% For maximum strength 2 mm from the edge of the glass Satin 81.45.020 Polished 81.45.021 Note Order base cover separately 48 37 % 25% For maximum strength 2 mm from the edge of the glass SB 200 HAA www.hafele.com 1
Stainless Steel Clamps Stainless steel clamp Round Base cover Round Ø Ø0 Ø48 14 14 R2 4.5 302.5 3 108 M10 recessed socket head screw Cover for clamp base Duplex 2205 grade stainless steel 170 Satin 81.45.010 Polished 81.45.011 25 mm holes on bottom 25% For maximum strength 2 mm from the edge of the glass Frameless glass pool fencing Duplex 2205 grade stainless steel 10 mm, 12 mm and 15 mm Clamp fixing with hexagon bolt Satin 81.45.000 Polished 81.45.001 Note Order base cover separately 85 % 25% For maximum strength 2 mm from the edge of the glass 2 SB 200 HAA www.hafele.com
Stainless Steel Clamps Stainless steel clamp Square, extended 4.5 X 45º Wall to glass clamp Round Glass 52 66.5 20 25 3 45 27 M10 countersunk head screw Frameless glass fencing 8 mm, 10 mm and 12 mm 60 Satin 81.45.300 Polished 81.45.301 444 10-Ø13 310 35 Wall to glass clamp Square 225 35 35 Glass 35 25 mm holes on bottom 25% For maximum strength 2 mm from the edge of the glass 24 2-M12 Fixing frameless glass fencing to timber decks Duplex 2205 grade stainless steel 10 mm, 12 mm and 15 mm Clamp fixing with hexagon bolt Satin 81.45.040 Polished 81.45.041 28 48 37 % 25% For maximum strength 2 mm from the edge of the glass Frameless glass fencing 8 mm, 10 mm and 12 mm Satin 81.45.310 Polished 81.45.311 27 55 25 27 55 Updated 04.0 SB 200 HAA www.hafele.com 3
Fittings for Gates Top pivot Glass to glass Top pivot Wall to glass 140 125.5 70 84.5 3 1. 3 1. 74.4 22 6 22 M6 with countersunk head Ø3 hole for grease 6.45 55.5 Ø15 R10 Ø3 hole for grease 25.4 Ø15 R10 6.45 60 40 36 M6 with countersunk head 44 Ø18 Pivot for StarTec top patch fitting used on frameless glass pool gates Clamp fixing with hexagon bolt Satin 81.45.100 Polished 81.45.101 Pivot for Startec top patch fitting used on frameless glass pool gates Bolt fixing to wall Satin 81.45.110 Polished 81.45.111 4 SB 200 HAA www.hafele.com
Fittings for Gates Top pivot 0º Glass to glass Patch lock kit 70 20 74 Ø14.5 54 M6 12 countersunk head screw 26 12 12 20 Magnetic lock for frameless glass gate Clamp fixing with hexagon bolt 73 6 20 5 1 10 M6 countersunk head screw 12 M12 grubscrew 42 36 44 Ø18 Note Left hand pivot image shown Pivot for StarTec top patch fitting used on frameless glass pool gates Clamp fixing with hexagon bolt Handing Satin Left hand 81.45.120 Polished Left hand 81.45.121 Satin Right hand 81.45.130 Polished Right hand 81.45.131 Packing: 1 set Ø18 27 326 Satin 81.45.200 Polished 81.45.201 Updated 04.0 SB 200 HAA www.hafele.com 5
Fittings for Gates Spring hinge and lock kit Glass to glass Spring hinge and lock kit Wall to glass For fully frameless and semi-frameless gates Bolt through fixing For fully frameless and semi-frameless gates Bolt through fixing 20 * Gap between Wall and Glass = 20 mm 820 820 31 42 31 42 2 45 2-Ø18 2-Ø18 2 45 Satin 81.45.400 Polished 81.45.401 Packing: 1 set 2-Ø18 31 2-Ø18 Conformity mark 2-Ø18 27 326 1170 2 45 2 45 31 Satin 81.45.410 Polished 81.45.411 Packing: 1 set 2-Ø18 2-Ø18 Conformity Conformity mark 2-Ø18 27 326 1170 6 Updated 03.0 SB 200 HAA www.hafele.com
Patch Fittings for Gates A StarTec Bottom patch fitting B StarTec Top patch fitting A 162 162 51 51 31 58 5-66 Features: Glass thickness: Max. door weight: Max. door leaf width: In combination with bottom pivot or floorspring Case: Diecast steel Cover: 80 kg 1100 mm Clamp fixing, concealed, with hexagon socket screws Features: Glass thickness: Max. door weight: Max. door leaf width: In combination with top pivot Adjustable pivot point by reversing insert Case: Diecast steel Cover: 80 kg 1100 mm Clamp fixing, concealed, with hexagon socket screws 36 Ø 20 Satin 81.00.310 Polished 81.00.311 R55 R80 161 146 Supplied with 1 Bottom patch fitting for double action doors 3 Allen keys SW2, 3 and 5 1 detail 68 37 36 R55 Ø20 37 R80 146 161 68 Satin 81.00.320 Polished 81.00.321 Supplied with 1 Top patch fitting for double action doors 3 Allen keys SW2, 3 and 5 1 detail Updated 04.0 SB 200 HAA www.hafele.com 7
Door Controls Floor Springs for Gates DCL 43 EN 2/3/4 Floor spring cover plate SS 316 52-58 Stainless steel 316 Satin 32.84.20 Polished 32.84.21 For single action doors Features: Removable spindle Closing force: Size 2/3/4 complying with EN 1154 Max. door opening angle: Approx. 130º Cover plate: 304 grade stainless steel : Cover plate: Satin Closing Force DCL 43 Non Hold-open EN2 32.84.037 EN3 32.84.034 EN4 32.84.038 Packing: 1 set Supplied with Floor spring Cover plate Fixing material Installation instructions Max. door leaf width mm EN 2 8 70 EN 3 105 EN 4 1100 1 Max. door leaf weight kg 8 Updated 04.0 SB 200 HAA www.hafele.com
Door Controls Floor Spring Accessories Extended spindle For DCL 43 Ø25 5 + L Features: To increase the floor clearance (i.e. for doors with thresholds or pool gates) With radial serrations Length (L) mm 5 32.84.11 10 32.84.12 15 32.84.13 20 32.84.14 25 32.84.15 Sealing compound Total contents: Packing: 1 set (2 cans) For filling the cavities of a floor spring. Consisting of parent solution and hardener (2 cans) 0.76 kg 32.00.310 SB 200 HAA www.hafele.com
HÄFELE AUSTRALIA PTY. LTD. STATE OFFICES DESIGN CENTRES Victoria - Head Office - 8 Monterey Road, South Australia Melbourne Design Centre Brisbane Design Centre (P.O. Box 1066) Dandenong VIC 3175 21 Chesser Street, Adelaide SA 00 Lvl 1, 75-77 Flinders Lane, Melbourne VIC 3000 1 Breakfast Creek Road, Newstead QLD 4006 Telephone: (03) 212 2000 Telephone: (08) 8232 33 Telephone: (03) 212 2000 Telephone: (07) 3344 1533 Fax: (03) 212 2001 Fax: (08) 8232 77 Fax: (03) 652 3701 Fax: (07) 3253 3701 info@hafele.com.au sa@hafele.com.au info@hafele.com.au qld@hafele.com.au New South Wales 10 Forsyth Close, Wetherill Park NSW 2164 Telephone: (02) 8788 2200 Fax: (02) 8788 2201 nsw@hafele.com.au Australian Capital Territory 1/88 Newcastle Street, Fyshwick ACT 260 Telephone: (02) 6283 8400 Fax: (02) 625 211 act@hafele.com.au Sydney Design Centre New Premises Open Mid 200 Telephone: (02) 8788 2200 Fax: (02) 8788 2201 nsw@hafele.com.au Hobart Design Centre 30 Liverpool Street, Hobart TAS 7000 Telephone: (03) 6331 7106 Fax: (03) 6334 6414 tas@hafele.com.au Queensland 12 Selhurst Street, Coopers Plains QLD 4108 Telephone: (07) 3344 1533 Fax: (07) 3344 1770 qld@hafele.com.au Tasmania 262 York Street, Launceston TAS 72 Telephone: (03) 6331 7106 Fax: (03) 6334 6414 tas@hafele.com.au Newcastle Design Centre Unit 1, 47 Bolton Street, Newcastle NSW 2300 Telephone: (02) 8788 2200 Fax: (02) 421 001 nsw@hafele.com.au Western Australia/N.T Freecall 1800 806 307 for all 2-33 Juna Drive, Malaga WA 600 customers in country regions. Telephone: (08) 24 3833 Fax: (08) 24 3328 wa@hafele.com.au HÄFELE NEW ZEALAND LTD. STATE OFFICES DESIGN CENTRE Auckland - Head Office Lower North Island Office South Island Office Auckland Design Centre 16 Accent Drive, The Wool Store, Level 1 5 Wigram Close 62 Cook Street East Tamaki, Auckland 262 Thorndon Quay, Wellington Sockburn, Christchurch Auckland City, Auckland Telephone: (0) 274 2040 Telephone: (04) 472 024 Telephone: (03) 343 8200 Telephone: (0) 274 2530 Fax: (0) 274 2041 Fax: (04) 472 025 Fax: (03) 343 8201 Fax: (0) 274 2531 info@hafele.co.nz welllington@hafele.co.nz christchurch@hafele.co.nz architectural@hafele.co.nz Freephone 0800 4 HAFELE www.hafele.com This catalogue is for the use of the recipient only. It remains in all respects the property of Häfele. Reproduction of this brochure in whole or in part, or the reproduction of the illustrations as well as the copying of the layout, is strictly prohibited. All measurements given in this publication are not binding. Rights for design improvements reserved. No responsibility for typographical or other errors occurring in the catalogue production. All deliveries made corresponding to Häfele sales conditions. Häfele reserves the right to adjust prices as may be deemed necessary. 200. Copyright by Häfele. All rights reserved. Printed in Australia. 01.200 _ 732.SB.CAT