[1] Submitted by Ana White [2] on Mon, 2013-03-25 11:42 [1] This closet is made from one sheet of plywood! Page 1 of 14
Wondering how to make a closet organizer system from one sheet of plywood? Check out this quick video for the step by step. And of course, the diagrams and cut list follow if you are needing to organize some closet space on a budget! Summary: Page 2 of 14
Free plans to DIY a closet organizer system from one sheet of plywood. Video tutorial and step by step instructions from Ana-White.com CategoriesProject Type: Built-In Woodworking Plans [3] Room: Closets [4] Skill Level: Beginner [5] Style: Farmhouse Style Furniture Plans [6] Dimensions: Dimensions shown above. Page 3 of 14
1 sheet ¾ plywood ripped into strips 15 7/8 wide, referred to as 1x16 boards throughout plan Wood glue 4 closet rod sockets 4 wood closet rods in lengths needed for closet 2 wood trim screws 3 wood screws Optional shelf pins for adjustable shelves Tools: Page 4 of 14
[7] [8] [9] Page 5 of 14
[10] Cut List: 2 1x16 @ 80 long (sides) 7 1x16 @ 15 ¾ (shelves) 5 1x16 @ 3 (wall cleats) General Instructions: Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck! Page 6 of 14
[11] Either have your hardware store rip your plywood into three easy to manage strips 8 feet long x 15 7/8 wide or use a table saw to rip plywood into strips 15 7/8 wide. These strips will be referred to as 1x16s in this plan. Then follow the cut list using a circular saw to cut 1x16s to needed sizes. Page 7 of 14
Page 8 of 14
[12] Mark joint locations on insides and outsides with measuring tape and square. Predrill holes with a countersink bit. Apply glue at joint and attach shelves to sides. Attach one cleat to top inside of closet, screwing through outsides and top to secure. When installing the closet, you can secure closet to wall by screwing through this cleat into a stud in the wall. Page 9 of 14
Page 10 of 14
[13] Additional shelves can be added same as main shelf OR a Shelf pin jig used to add adjustable shelves. If you go the shelf pin/adjustable shelf route, I recommend cutting the shelves down 1/4" so they fit inside easily. Page 11 of 14
[14] Locate studs in walls and mark. Attach wall cleats to wall using countersink bit and 3 screws, screwing into studs. NOTES: If closet has a baseboard, use a jigsaw to cut notch out of back of closet system for baseboard. Page 12 of 14
[15] Measure and cut the closet rods. Install rod sockets with drill and measuring tape. Check rods for level with level. Finishing InstructionsPreparation Instructions: Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces Page 13 of 14
as well. Wipe project clean with damp cloth. It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed. Source URL: http://www.ana-white.com/2013/03/plans/closet-organiz er-one-sheet-plywood Links [1] http://www.ana-white.com/2013/03/plans/closet-organizer-one-sheet -plywood [2] http://www.ana-white.com/users/ana-white [3] http://www.ana-white.com/category/plans/project-type/built-ins [4] http://www.ana-white.com/category/plans/room/closets [5] http://www.ana-white.com/category/plans/skill-level/beginner [6] http://www.ana-white.com/category/plans/style/farmhouse [7] https://www.ryobitools.com/power-tools/products/details/537 [8] https://www.ryobitools.com/power-tools/products/details/92 [9] https://www.ryobitools.com/power-tools/products/details/187 [10] https://www.ryobitools.com/power-tools/products/details/774 [11] http://www.ana-white.com/sites/default/files/3154824336_1364229 778.jpg [12] http://www.ana-white.com/sites/default/files/3154824337_1364229 778.jpg [13] http://www.ana-white.com/sites/default/files/3154824338_1364229 778.jpg [14] http://www.ana-white.com/sites/default/files/3154824339_1364229 778.jpg [15] http://www.ana-white.com/sites/default/files/3154824340_1364229 778.jpg Page 14 of 14