Niobium CABLE SUSPENDED (CS) 1 Lumium Cat. #: Project: Type: FROSTED CLEAR OR FROSTED WHITE LENS (1 OR 2) T5, T5HO, OR T8 LAMP(S) PRODUCT DESCRIPTION: The profile offers multiple lamping and integral ballast options while maximizing fixture efficacy in a 50/50 housing/lens square profile. Various lens options offer different aesthetics while maintaining an incredibly clean form and contemporary aesthetic. Nb HIGH EFFICIENCY REFLECTOR EXTRUDED ALUMINUM INTEGRAL BALLAST WITH ALL FIXTURE OPTIONS FEATURES: Clean square profile 50/50 Extruded aluminum housing and lens High transmission frosted and clear linear prismated lenses Integral ballasts for all fixture options Multiple lamps in a single housing No visible fasteners 3/8 thick machined end cap options PRODUCT SPECIFICATION FIXTURE TYPE MOUNTING CS FIXTURE ORIENTATION LAMP NOMINAL LENGTH VOLTAGE BALLAST OPTIONS HARDWARE DETAIL Niobium 3 CS Cable Suspended D Direct I Indirect R Rotational 1T5 2T5 1T5HO 2T5HO 1T8 2T8 *Single lamp recommended for greatest fixture efficacy 2 2 3 3 4 4 6 6 8 8 CR Continuous Run - Specify run length in feet (ie: CR42) [Shop drawings will be provided] 1 120v 2 277v 3 347v U Universal (120-277v) IS RS SB DIM Instant Start Rapid or program Start Specific Ballast* Dimming** *Specify and contact factory **See Ballast section below for more information SC SW Satin Clear (Anodize) Satin White (powder coat) MF Machined Finish (standard) CANOPY CANOPY SIZE OPTIONS* POWER CORD COLOR AIRCRAFT CABLE LENGTH* LENS OPTIONS/ CUSTOMIZATION* SW Satin White CC Custom Canopy finish* 55 52 50 5 Power feed canopy 5 non-power feed canopy 5 Power feed canopy 2 non-power feed canopy 5 Power feed canopy No canopy on non power side *See options section and installation instructions for more information. W White OPTIONS G Gray B Black CB Clear Braided BS Braided Sleeve (Steel weave) CC Custom Cord* 4 4 CL_ Custom Length Specify in feet (ie: CU6 for 6 ) Consult factory to confirm spec *Cables are field adjustable Clear Frost WF White Frost LP Linear Prismatic NL No Lens CC Custom Color* Blank No customization EMB Emergency Battery backup ballast* CR Cusomization Requested* Lumium offers an array of options - See the options section for more information. custom concepts are also possible for all custom options or custom concept requests 2 - EMB: See ballast section below SPECIFICATION INFORMATION GENERAL NOTES: All fixtures are UL listed for dry and damp locations. Please contact the factory with any specification questions. Italicized grayed out options may have additional costs and/or lead times. FIXTURE ORIENTATION: Direct (D) for downlight applications Inirect (I) for uplight applications Rotational (R) for adjustable applications: 360 degree rotational capacity VOLTAGE: System voltage is helpful as it provides more ballast options. Please use the Universal (U) specification only when the project voltage is unknown. For integral ballast options, fixture voltage must be specified. BALLAST: Niobium 3 can accommodate almost any ballast requirement inside the fixture, including dimming and emergency battery backup. If there is a specific ballast requirement or if there are any questions, please contact the factory. 1) DIMMING: Contact factory for specific dimming information. 2) EMERGENCY: Specify ballast type under the Ballast Options category. Specify EMB under the Options/Customization category at the end of the cut sheet. Remote ballast housing is required for this fixture with EM requirements. Contact factory. ES: The standard finish is a satin white powder coated or satin clear anodized housing with Machined Finish hardware. Machined finish is preferable for the machined components (Hardware Detail) - Powder coating may result in additional costs. Please consult the factory with any questions about standard or custom finishing options. AIRCRAFT CABLE LENGTH: Aircraft cable is field adjustable and cutable. For drops longer than 4, specify a cable length which encompasses that distance. LENSES: Clear Frost () Highly transmissive lens, but does have lamp imaging with this fixture. White Frost (WF) should be used when lamp imaging is a concern. This option slightly reduces fixture efficacy. CUSTOMIZATION: We have numerous custom options available as seen above. From simple options to complete custom requests, we are more than willing to accommodate any creative notions you might have. Just ask. While we always strive to ensure all website content and product information is current, Lumium Lighting reserves the right to change specifications without notice. -0813
Niobium SURFACE MOUNT (SM) 2 Lumium Cat. #: Project: Type: FROSTED CLEAR OR FROSTED WHITE LENS EXTRUDED ALUMINUM PRODUCT DESCRIPTION: The profile offers multiple lamping and integral ballast options while maximizing fixture efficacy in a 50/50 housing/lens square profile. Various lens options offer different aesthetics while maintaining an incredibly clean form and contemporary aesthetic. Nb (1 OR 2) T5, T5HO, OR T8 LAMP(S) HIGH REFLECTANCE ENGINEERED REFLECTOR INTEGRAL BALLAST WITH ALL FIXTURE OPTIONS PRECISION MACHINED ALUMINUM END CAP FEATURES: Clean square profile 50/50 Extruded aluminum housing and lens High transmission frosted and clear linear prismated lenses Integral ballasts for all fixture options Multiple lamps in a single housing No visible fasteners 3/8 thick machined end cap options PRODUCT SPECIFICATION FIXTURE TYPE MOUNTING SM LAMP* NOMINAL LENGTH VOLTAGE BALLAST OPTIONS END CAP Niobium 3 SMW SMT Surface Mount - SIDE Surface Mount - TOP 1T5 2T5 1T5HO 2T5HO 1T8 2T8 *Single lamp recommended for greatest fixture efficacy 2 2 3 3 4 4 6 6 8 8 CR Continuous Run - Specify run length in feet (ie: CR42) 1 120v 2 277v 3 347v U Universal IS RS SB DIM Instant Start Rapid or program Start Specific Ballast* Dimming** *Specify and contact factory **See Ballast section below for more information NOTE: T5 and T5HO fixtures have integral ballasts. T8 fixtures are remote ballast only. SC SW Satin Clear (Anodize) Satin White (powder coat) MF Machined Finish (standard) LENS OPTIONS/ CUSTOMIZATION* Clear Frost WF White Frost LP Linear Prismatic NL No Lens CC Custom Color* Blank No customization EMB Emergency Battery backup ballast* CR Cusomization Requested* Lumium offers an array of options - See the options section for more information. custom concepts are also possible for all custom options or custom concept requests 2 - EMB: See ballast section below SPECIFICATION INFORMATION GENERAL NOTES: All fixtures are UL listed for dry and damp locations. Please contact the factory with any specification questions. Italicized grayed out options may have additional costs and/or lead times. VOLTAGE: System voltage is helpful as it provides more ballast options. Please use the Universal (U) specification only when the project voltage is unknown. For integral ballast options, fixture voltage must be specified. BALLAST: Niobium 3 can accommodate almost any ballast requirement inside the fixture, including dimming and emergency battery backup. If there is a specific ballast requirement or if there are any questions, please contact the factory. 1) DIMMING: Contact factory for specific dimming information. 2) EMERGENCY: Specify ballast type under the Ballast Options category. Specify EMB under the Options/Customization category at the end of the cut sheet. Remote ballast housing is required for this fixture with EM requirements. Contact factory. ES: The standard finish is a satin white powder coated or satin clear anodized housing with Machined Finish hardware. Machined finish is preferable for the machined components (Hardware Detail) - Powder coating may result in additional costs. Please consult the factory with any questions about standard or custom finishing options. LENSES: Clear Frost () Highly transmissive lens, but does have lamp imaging with this fixture. White Frost (WF) should be used when lamp imaging is a concern. This option slightly reduces fixture efficacy. CUSTOMIZATION: We have numerous custom options available as seen above. From simple options to complete custom requests, we are more than willing to accommodate any creative notions you might have. Just ask. While we always strive to ensure all website content and product information is current, Lumium Lighting reserves the right to change specifications without notice. -0813
Niobium FIXTURE CONSTRUCTION: Housings: Extruded aluminum Lenses: Extruded frosted acrylic End caps: Machined aluminum Reflectors: Specular, semi-specular, or high reflectance white Internal components: Formed aluminum or steel sheet metal No visible fasteners (unless requested as a custom option) ES: Standard housing finishes are Satin Clear (SC) (anodized) and Satin White (SW) (powder coated). Custom anodized and powder coated finishes are available. Let us know what you are looking for and we will find a way to make it happen. Given the precision nature of the product lines, whenever possible machined finishes are preferred for the machined components and are typically less expensive. Cut sheets are set up so that two-tone finishes can be easily ordered. This option lends to an even higher end feel and creates a unique look. More detailed finishing is available if desired or needed. Contact the factory with specific requests or finish questions. LENSES: Clear Frost (): We have created our own acrylic blend to create a highly transmissive lens that significantly diminishes lamp imaging. This is our recommended lens for most fixtures. White Frost (WF) is the ideal selection for reducing or eliminating lamp imaging and diminishing socket shadows in longer fixtures (6 or greater) and continuous runs. However, this option does reduce fixture efficacy. Custom lens colors and styles are available as well. If there is a specific request or project requirement, please contact the factory. LAMPS: Lamping options: T5, T5HO, and T8 (fixture dependent) 4 T5 and T8 lamps offer the best potential efficacy. T5HO lamps offer the highest lumen output per lamp allowing for fewer fixtures in a space. T5 and T5HO lamps are recommended for most Lumium fixtures as their smaller respective size allows for greater light distribution control and overall fixture efficacy. Typically the smallest fixtures in a series can only utilize T5 or T5HO lamps as T8 lamps are too large for the small profiles. DETAILED SPECIFICATION INFORMATION FIXTURE LENGTHS: Fixtures are measured in nominal lengths. For specific fixture measurements and mounting information please see the installation instructions. (5 T5 and T5HO lamp fixtures are available as a custom option. Consult factory.) Lamp, nominal length, and corresponding fixture wattage information is as follows. T5 2' 14w 3' 21w 4' 28w 6' 2x21w 8' 2x28w T5HO 24w 39w 54w 2x39w 2x54w T8 17w 25w 32w 2x25w 2x32w (CR) options are available for just about every fixture type and option. There are exceptions. Please contact the factory with specific run length information and questions. BALLASTS: Ballast specification is often dependent upon the fixture, options, and installation. Instant Start (IS) ballasts work best when fixtures will not be switched on/off frequently (ie: motion sensor in a restroom). They also offer thinner power cords with remote ballast cable suspended applications. Rapid Start (RS) ballasts should be used when fixtures will be switched often. There are more specification grade RS ballast options. When remote ballasts are used on cable suspended fixtures, the power cord is typically thicker. Dimming (DIM) ballasts work great with the larger fixture lines (typically any fixture with a 3 in the name). Dimming ballasts have significant lead restrictions, limiting the ballast to furthest socket distance. Please consult the factory with questions or specific dimming requirements and we will ensure the proper specification. Emergency (EM) ballasts can be specified with just about any fixture configuration. For integral EM ballast options, the fixture typically needs to be at least 3 long; 4 is the safest option. Consult the factory with any questions. KNUCKLE/END CAP/COVER PLATE STYLES: These details are offered to provide subtle specification differences to suit project needs. Customization is available if another aesthetic is desired. Please contact the factory with any specific requests. Nb MOUNTING: Cable Suspended (CS and CS-R): 1/16 aircraft cable suspension system. Fixtures can be static down-lights: Direct (D), static up-lights: Indirect (I), or Rotational (R). Rotational fixtures offer just over 360 degrees of rotation with locking fasteners. Various cable finishes, sleeve options, and canopy colors offer options to match almost any space. Rotational Arm Mount (RAM): 1/2 to 5/8 diameter aluminum arms with various knuckle options and 360 degree rotational capacity. There are no visible fasteners. Standard mounting uses 3-O mud rings (supplied by others) or a 1 optional trim ring for furniture mounted applications. Surface Mount - Wall/Side or Ceiling/Top Mount (SMS or SMT): Fixtures mount directly to the surface. Ceiling or Wall Mount specification denotes the power feed hole location(s). Optional stand-offs allow for fixtures to be mounted from 1/2 to 12 as well as custom lengths if needed. Asymmetric Suspension Mount (ASM and ASM-R): A unique configuration wherein the fixture is balanced from an off-center mounting point creating a dynamic aesthetic. This mounting option also allows integral ballast options on the 1 series fixtures with standard T5 lamps. Static and rotational options lend to fixture versatility. CUSTOM: We take pride in not only offering creative options, aesthetic appearances, and finishes, but we are also more than willing to accommodate any creative notions you might have. Our experience in fixture design, engineering, and manufacturing will ensure your expectations are met or exceeded. Please contact the factory with any questions about our processes or to have us help design a fixture tailored for your specific needs and project requirements. 3 PHOTOMETRIC DATA 110.0 115.0 135.0 180.0 135.0 115.0 141 110.0 94 100.0 100.0 47 90.0 0 90.0 47 80.0 94 80.0 70.0 141 70.0 188 60.0 236 60.0 283 330 50.0 50.0 377 T8 Fixture Efficacy: 87% Fixture Properties: 4 Lamp Clear Frost () lens High Efficacy White Reflector 32w T8 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 90-120 90-150 90-180 0-180 Lumens 307 510 978 1736 505 747 799 2535 %Lamp 10.6 17.6 33.7 59.9 17.4 25.7 27.5 87.4 %Fixt. 12.1 20.1 38.6 68.5 19.9 29.5 31.5 100.0 40.0 30.0 20.0 10.0 0.0 10.0 20.0 30.0 40.0 Niobium 3: 4 32W T8 While we always strive to ensure all website content and product information is current, Lumium Lighting reserves the right to change specifications without notice. -0813
OPTIONS GUIDE O.1 GENERAL OPTIONS* *NOT ALL OPTIONS ARE AVAILABLE WITH EVERY FIXTURE *NOT ALL OPTIONS SHOWN MOUNTING OPTIONS Cable Suspended (CS) 1/16 aircraft cable suspension system. Fixtures can be static down-lights: Direct, static up-lights: Indirect, or Rotational (see CSR below). Standard and custom power cord finishes, sleeve options, and canopy colors offer options to match almost any space. Stainless steel cables come in various lenghts (4 is standard) and are field adjustable. Cable Suspended Rotational (CS-R) Using a similar setup to the Cable Suspended system above, the Cable Suspended - Rotational system has 360 degree rotational capcity with mechanical fasteners to lock fixtures in place if desired. This system offers incredible flexibility, light direction control, and a dynamic aesthetic. Rotational Arm Mount (RAM) This system uses 1/2 to 5/8 diameter aluminum arms and subtle details in combination with 360 rotational capacity to create some of the most versatile linear fixtures in the architectural market. Standard mounting uses 3-O mud rings (supplied by others) or a 1 optional trim ring for furniture mounted applications. Engineered with no visible fasteners, smooth rotation, and mechanical locking, the RAM system reveals an impressive aesthetic with exceptional versatility. Surface Mount (SM) (Ceiling Mount or Wall Mount - CM or WM): Fixtures mount directly to the surface. Ceiling or Wall Mount specification denotes the power feed hole location(s). Optional stand-offs allow for fixtures to be mounted from 1/2 to 12 as well as custom lengths if needed. Asymmetric Mount (ASM) A unique configuration wherein the fixture is balanced from an off-center mounting point creating a dynamic aesthetic. This mounting option also allows some integral ballast options on the 1 series fixtures with standard T5 lamps. Direct, indirect, or rotational options round out this creative mounting option. CONTINUOUS RUN OPTIONS Continuous runs are available with all fixtures and have several connection options. Single Seam continuous run options offer smooth section transitions while Component Seams lend to a more dramatic visual statement. The 360 (degree symbol) Rotational option enables individual sections to rotate independently of each other, which offers adjustable asymmetric light distribution capacity along with striking appearances such as alternating up/down fixtures or spiral transitions. The flexibility within the rotational option makes for infinite design and functional possibilities. Single Seam Component Seam Rotational Rotational (Spiral effect) COLOR AND OPTIONS CONFIGURATIONS Satin Clear Anodizing Standard Finishes Satin White Power coat *Custom Finishes examples* Specular Gunmetal Nickel Plating Standard finish configurations are Satin Clear (SC) or Satin White (SW) housings with Machined Finish (MF) machined components (end caps, knuckles, cover plates, etc.). The incredibly clean detail within all of the machined components lends to an incredibly high end aesthetic with a two tone finish. Tl 2 O 2 Satin Clear anodizing and Satin White are standard finishes. Our Satin White is a semi-matte powder coating finish with a subtle, rich luster. Numerous custom anodizing and powder coated finishes are available as well. If you have a particular color/finish treatment in mind, please contact the factory and we will do our best to accommodate your project needs. Matte Black Color Anodize *RAL and es may involve additional costs and may have fixture length restrictions. Please consult the factory with any questions or for specific finish information. RAL Colors Color Powder coat Bronze Brushed Thallium 2 (Tl2), Cable Suspended - Rotational with two-tone finish: Satin Clear housing and Machined Finish components. Oxygen 2 (O2), Rotational Arm Mount system with single tone finish: Satin Clear housing and Satin Clear components. While we always strive to ensure all website content and product information is current, Lumium Lighting reserves the right to change specifications without notice. Options-0813
OPTIONS GUIDE (continued) O.2 GENERAL OPTIONS* *NOT ALL OPTIONS ARE AVAILABLE WITH EVERY FIXTURE *NOT ALL OPTIONS SHOWN KNUCKLE OPTIONS Almost all Lumium fixtures have mounting options with rotational capacity. Flat knuckles are standard and require no change to any RAM or CS-R specification. Concave and Convex knuckles are optional and can be specified under the Options/Customization. Use the annotations listed to the right. Other custom options are available such as larger knuckles to match a fixture s size or custom shapes if a specific aesthetic is destired. Consult factory with any questions or further customization requests. Tl 1 Flat Knuckle (standard) Concave Knuckle (CCK) (optional) Convex Knuckle (CXK) (optional) Thallium 1 - Rotational Arm Mount Standard Flat Knuckle O2 with matching knuckle size N2 with custom square knuckle 2 or 3 (or other diameter) knuckle - works well matching fixtures in the Oxygen series Square Knuckle (Custom) Custom limited only by one s imagination COVER PLATE OPTIONS Cover plates are standard for Rotational Arm Mounting (RAM) systems. Standard options are Flat (FT), Curved (CV), or Trim Ring (TR). With certain applications, cover plates or trim rings may not be necessary. Contact factory with questions or for more information. Custom cover plates are also available. if a certain aesthetic is desired, please contact the factory to review any concepts and we will do our best to bring your vision to life. Flat (CPFT) Flat 4" diameter cover plate for use with a 3-O mud ring Curved (CPCV) Curved 4" diameter Cover plate for use with a 3-O mud ring Trim Ring (TR) 1-1/4 diameter trim ring Can be used in applications such as desk mounting Custom Your imagination is the catalyst for creativity Lightstream is our unique 1/16 aperture lens that creates a striking light accent. This design element is inherent to the Radium2 (Ra2) and Rubidium2 (Rb2) fixtures and can be specified as an option on the Thallium2 (Tl2) and Trinium2 (Tr2) fixtures. (Note: using this option on the Thallium2 eliminates the integral ballast option.) Rb 2 Ra 2 Ra -CS-R 2 Clear Frost () or White Frost (WF) are standard, but colored gels can be utilized to create custom color Lightstream accents. In addition, matching or two-tone metal accents can be used in lieu of an emissive lens. Please contact the factory or your local rep agency with any questions, color requests, or for specification assistance. Tr 2 Tl 2 Custom gel colors and other options are available. Please contact the factory with questions or specific requests. While we always strive to ensure all website content and product information is current, Lumium Lighting reserves the right to change specifications without notice. Options-0813
OPTIONS GUIDE (continued) O.3 GENERAL OPTIONS* *NOT ALL OPTIONS ARE AVAILABLE WITH EVERY FIXTURE *NOT ALL OPTIONS SHOWN CANOPY OPTIONS STANDARD Canopies have several standard options as well as custom options to suit various environment aesthetics. The standard cable suspension system has 5 Satin White canopies. However, other standard options include a 2 non-power feed canopy option as well as no canopy at all. Both of these include a 5 diameter power feed canopy. MACHINED OPTIONS Machined canopies are 4 in diameter and can be anodized as well as powder caoted to match a desired color or they can be left with a mill finish for a more striking look. Similar non-power feed options are available with this aesthetic as well. These options do carry a higher cost than standard canopies, but also have an impressive appearance. 55 44 55-5 diameter power feed canopy and 5 diameter non-power feed canopy. Most common canopy layout. Creates a consistent ceiling aesthetic. 44-4 diameter machined power feed canopy and 4 diameter machined on-power feed canopy. Offers a consistent ceiling aesthetic with slightly smaller machined canopies. Mill, anodized, and powder coat finishes available. 52 41 52-5 diameter power feed canopy and 2 diameter non-power feed canopy. For a more minimal ceiling treatment while maintaining the ability to cover up mistakes. Requires a 1/4-20 stud securely fastened to ceiling. 41-4 diameter machined power feed canopy and 1-1/4 diameter machined non-power feed canopy. For a more minimal ceiling treatment while maintaining the ability to cover up mistakes. Requires a 1/4-20 stud securely fastened to ceiling. Mill, anodized, and powder coat finishes available. 50 40 50-5 diameter power feed canopy and no canopy on the non-power feed side. Minimal aesthetic. Requires a 1/4-20 stud securely attached to ceiling. Works well with conintuous runs where the power can be carried inside the fixture. 40-4 diameter machined power feed canopy and no canopy on the non-power feed side. Minimal aesthetic. Requires a 1/4-20 stud securely attached to ceiling. Works well with conintuous runs where the power can be carried inside the fixture. Mill, anodized, and powder coat finishes available. CUSTOM CANOPIES Completely custom canopies can be ordered. These options are an upgrade, but can look spectaculare in certain applications. Contact the factory with all custom requests or with any questions. Custom Anodize (Machined Canopies only) Custom Powder Coat Custom Shapes LENS OPTIONS Lumium has developed a unique Clear Frost () polymer composite that maintains superb lumen transmission while limiting lamp imaging. White Frost (WF) lenses diminish and often eliminate lamp imaging while sacrificing only slightly reduced fixture efficacy. A choice of Clear Frost or White Frost lenses are available with all Lumium fixtures. Custom lenses are also available. Consult factory for all custom requests or with any questions. Clear Frost () Excellent light transmission Reduced lamp image White Frost (WF) Minimal to no lamp image Slightly reduced efficacy Custom Custom colors and lens styles available - Consult factory While we always strive to ensure all website content and product information is current, Lumium Lighting reserves the right to change specifications without notice. Options-0813