AIC 2004 Color and Paints. Interim Meeting of the International Color Association Porto Alegre, Brazil, November 3-5, 2004.

Similar documents
The Representation of the Visual World in Photography

The Representation of the Visual World in Photography

A Model of Visual Opacity for Translucent Colorants

Match the correct description with the correct term. Write the letter in the space provided.

The Performance of CIECAM02

Light and Color (pages )

Longitudinal No, Mechanical wave ~340 m/s (in air) 1,100 feet per second More elastic/denser medium = Greater speed of sound

ISO CIE S 014-4/E

skip chap. 8 for now Chap. 9 Color (continued) Lecture 19 Tuesday, October 26

SELECTED PUBLICATIONS by the recipients of AIC Judd award Edited in 2017 by Karin Fridell Anter, as decided by the Executive Committee of AIC.

This document is a preview generated by EVS

Photography Composition using the Elements and Principles of Art

Ch. 18 Notes 3/28/16

H10: Description of Colour

Technical Notes. Introduction. Optical Properties. Issue 6 July Figure 1. Specular Reflection:

Chapter 16 Light Waves and Color

The effect of illumination on gray color

LIGHTIG FOR INTERIORS

GLS can. Gellifter imaging system. Easy to operate and results in less then a minute. Detect the weakest of traces excellent illumination

HP large format graphics & technical. Key large format applications CAD & GIS. Print with the environment in mind PEFC/

Myth #1. Blue, cyan, green, yellow, red, and magenta are seen in the rainbow.

FINISH. + + Coated papers have a smooth clay coating applied over base paper

Light waves interact with materials.

Chapter Introduction. Chapter Wrap-Up. and the Eye

Test Review # 8. Physics R: Form TR8.17A. Primary colors of light

SIGN & DIGITAL PRODUCT CATALOGUE

Level 3 Certificate in Design and Craft

Influence of surface properties of ink jet papers on

Sensing paint thickness

Microvoid calcined clay for improved opacity

Class XII - Physics Wave Optics Chapter-wise Problems

CSI Application Note AN-525 Speckle Pattern Fundamentals

Conceptual Physics Fundamentals

Canon Large Format Price Guide 2018 H2

Chapter: Sound and Light

The Aesthetic Element in PFM Restorations

Light Enhancement Film

Decorative Laminated Architectural Glass

Electromagnetic Waves

www MK-Electronic de DeskJet 1100C HP Parts Reference Guide Electronics/Power Supply External Case Parts Interface Cables Cable Keypad PC Board

Ultra-Broadband Forum September 2015 Madrid, Spain

Vision 1. Physical Properties of Light. Overview of Topics. Light, Optics, & The Eye Chaudhuri, Chapter 8

Printing Materials Overview. SOURCE:

LlIGHT REVIEW PART 2 DOWNLOAD, PRINT and submit for 100 points

LECTURE III: COLOR IN IMAGE & VIDEO DR. OUIEM BCHIR

Magnitude Scaling. Observations: 1. (Ordinal) Homer Simpson is more humorous than any other character from The Simpsons

Physics for Kids. Science of Light. What is light made of?

Giving Shape to Ideas

LEVEL: 2 CREDITS: 5.00 GRADE: PREREQUISITE: None

Precision glassware made by SCHOTT

Content. Next. Standard / unpainted finishes 2. Finishing Degrees in Vacuum casting 9. Painted / coloured finishes 4

VISIONS on Composites Innovation in Automotive, Aerospace and more

No limit to your imagination A wide range to meet every requirement

Instructional Resources/Materials: Light vocabulary cards printed (class set) Enough for each student (See card sort below)

Chapter 3¾Examination and Description of Soils SOIL SURVEY MANUAL 73. Soil Color

SUPER RGB Sensor. Lustre Detection Sensor Head. is newly developed. CZ-V20 Series. It can detect lustre without being affected by colours CZ-V20

Life Science Chapter 2 Study Guide

Shade and Shadow. Lights Dark Brother. Lighting Design is Shade and Shadow. Light and Shadow a unity.

Advancing the business of intellectual property globally.

WATER-BASED INKJET EASY REFERENCE GUIDE. Our Branches. PRINT Anglia Tel: Fax:

NO. 8 FINISH (MIRROR POLISHED) Obtained by polishing with successively finer abrasives, then buffing with a very fine compound. RANDOM SWIRL FINISH

2 : About Wattyl Taubmans Colour Systems

Color Wheel. Warm Colors. Cool Colors

Design of pollution preventing system for camera window

AK893 GLASS COAT GAUZY AGENT

Basics of Light Microscopy and Metallography

UNDERCOVER INFLUENCES

Brillux Scala - Development of an Application-Orientated Colour System

Gels, Pastes, Liquid Mediums & Additives

Multimedia Systems and Technologies

Photoelectric Sensors Technical Guide

Philpot & Philipson: Remote Sensing Fundamentals Color 6.1 W.D. Philpot, Cornell University, Fall 2012 W B = W (R + G) R = W (G + B)

IGPG Car Wash Round Robin Test Procedure

POST-CONGRESS REPORT

Optics looks at the properties and behaviour of light!

The Persistence of Vision in Spatio-Temporal Illusory Contours formed by Dynamically-Changing LED Arrays

Art, Archaeology & Analysis March 10, 2003 Alison Shull Dept. of Materials Science & Engineering

Elements of Art. Define: Line. Shape. Value. Texture. Color. Form. Space

Announcements. EM Induction. Faraday s Law 4/24/15. Why is current induced? EM Induction: Current is Induced

More than colour dimensions of light and appearance

WorléeDisperse. polymeric additives for premium pigment grinding. Daniel Heighton/shutterstock.com

USER S MANUAL. NX-5 Series. Power Supply Built-in Compact Multi-voltage Photoelectric Sensor

Ch 16: Light. Do you see what I see?

ART CRITICISM: elements//principles

HOW DOES A DENSITOMETER WORK?

ARCHITECTURAL GLASS CARVART.COM. O3 Pattern 2018 CARVART

Munsell Color Science Laboratory Publications Related to Art Spectral Imaging

Test Review # 9. Physics R: Form TR9.15A. Primary colors of light

Assignment: Cameras and Light

Application Techniques

Radiology. Radiograph: Is the image of an object made with use of X- ray instead of light.

Opalux Designer Window Films

Toolkit for Establishing Laws to Control the Use of Lead in Paint Module A

UNIT 12 LIGHT and OPTICS

Teacher s Resource. 2. The student will see the images reversed left to right.

Screen Making For Membrane Switches

ACRYLITE. for Lighting Technologies

Slide 1. Slide 2. Slide 3. Light and Colour. Sir Isaac Newton The Founder of Colour Science

Characterization of Surface Structures using THz Radar Techniques with Spatial Beam Filtering and Out-of-Focus Detection

PATENT SCHEDULE of granted patents and published patent applications

Transcription:

AIC 2004 Color and Paints Interim Meeting of the International Color Association Porto Alegre, Brazil, November 3-5, 2004 Proceedings edited by José Luis Caivano 2005

AIC 2004 Color and Paints was organized by the Brazilian Color Association (ABCor, Associação Brasileira da Cor) on behalf of the International Color Association (AIC, Association Internationale de la Couleur) AIC 2004 Color and Paints, Proceedings of the Interim Meeting of the International Color Association, Porto Alegre, Brazil, 3-5 November 2004 The proceedings include: invited lectures, oral papers, posters. Reference to papers in this book should be made as follows: For the electronic version on the Internet: Author(s). 2005. Title of the paper. In AIC 2004 Color and Paints, Proceedings of the Interim Meeting of the International Color Association, Porto Alegre, Brazil, 3-5 November 2004, ed. by José Luis Caivano. In www.fadu.uba.ar/sicyt/color/aic2004.htm, pp. X-X [first and last page of the article]. For the printed version: Author(s). 2005. Title of the paper. In AIC 2004 Color and Paints, Proceedings of the Interim Meeting of the International Color Association, Porto Alegre, Brazil, 3-5 November 2004, ed. by José Luis Caivano and Hanns-Peter Struck. Porto Alegre, Brazil: Associação Brasileira da Cor, pp. X-X [first and last page of the article].

AIC 2004 Scientific Committee AIC 2004 Organizing Committee Argentina: Austria: Brazil: England: Germany: Italy: Japan: Spain: Sweden: USA: Thailand: José Luis Caivano (chair) Roberto Daniel Lozano María L. F. de Mattiello Leonhard Oberascher Nelson Bavaresco Robert Hirschler Marcos Quindici Hanns-Peter Struck John Hutchings Ming Ronnier Luo Lindsay MacDonald Michael Pointer Klaus Witt Osvaldo da Pos Lucia Ronchi Munehira Akita Hirohisa Yaguchi Joaquín Campos Acosta Manuel Melgosa Javier Romero Berit Bergström Paula J. Alessi Allan Rodrigues Aran Hansuebsai President: Hanns-Peter Struck General Secretary and Treasurer: Maira Knop General Chair: Nelson Petzold Secretary of the Event: Catia Brach Monser Exhibition Chair: Roberto Ilhescas Event Chair: Erni Clovis Gil Publicity and Publications Chair: Norton Eduardo S. da Cunha Opinion Research Chair: Susana Carvalho i

AIC Executive Committee President: Paula J. Alessi (USA) Vice-president: José Luis Caivano (Argentina)* Secretary/Treasurer: Frank Rochow (Germany) Members: Joaquín Campos Acosta (Spain) Paul Green-Armytage (Australia) Aran Hansuebsai (Thailand) Hirohisa Yaguchi (Japan) * Member 2002-2003 Vice-president 2002-2003 ii

Cesia and paints: An atlas of cesia with painted samples José Luis CAIVANO,* Ingrid MENGHI, and Nicolás IADISERNIA * University of Buenos Aires and National Council for Research Sherwin Williams Argentina SA ABSTRACT The name cesia has been given to the modes of appearance produced by different spatial distributions of light. The aim of this paper is to present a new atlas of cesia produced with painted samples. The atlas consists of 5 pages with 25 samples each, that is to say, a total of 125 samples. The samples in every page have a different degree of perceived permeability to light, from the opaque samples to the transparent ones, passing through samples with different degree of perceived turbidity. Furthermore, in each page, the variation of darkness (from very light to very dark) and the variation of diffusivity (from matte or translucent to glossy or crystalline) occur. 1. INTRODUCTION AND ANTECEDENTS The name cesia has been given to the modes of appearance produced by different spatial distributions of light (Caivano 1991, 1993, 1994, 1996). From the physical point of view, an object may absorb light, and the non-absorbed portion can be either reflected by the material, or transmitted trough it. Both reflection and transmission may occur regularly (specularly) or diffusely, and any intermediate combination may also appear. Those physical transfers are the stimuli for the visual sensations of cesia: matte appearance, glossy or mirror-like appearance, translucency, and transparency, with different degrees of darkness, and all the intermediate or combined cases. Every color appears in some of these modes of appearance, and vice versa. Now on, the stimulus for color can be produced by primary sources (objects that emit light) or by secondary sources (objects that reflect or transmit the light coming from another source). Both in a primary or a secondary source we can have a variation of color, but the variations of cesia only occur in secondary sources, that is to say, in objects that produce changes in the spatial distribution of the light that they receive. These changes are mainly due to micro-textural variations on the surface or in the volume of the object. If these textural variations are of a rather small size, then the texture itself is not perceived, but the effect produced on light is, and we see cesias. The three variables originally proposed for cesia are permeability, absorption, and diffusivity. As the word absorption usually refers to a physical process, darkness is perhaps better to allude to the resulting visual sensation. Thus, the variables could be termed perceived permeability (or its opposite, opacity), perceived darkness (or its opposite, lightness), and perceived diffusivity (or its opposite, regularity, related to the distinctness of image, not only referred to the sharpness of images produced by reflection but also by transmission). Paints are one of the most versatile materials to produce these kinds of variations. A paint may cover a surface, working as an opaque coating, and in that case the stimulus for cesia is due to the surface finishing. A rough surface produces a matte effect, while a polished surface produces gloss. But if the paint is more or less transparent, then, in addition to the surface finishing, the internal composition, working in the whole thickness of the layer, is important. In these cases, the stimuli for cesia are of a more complex nature. An atlas of cesia made with 113

pieces of glass was presented in AIC 1997, Kyoto (Caivano and Doria 1997). The samples in the atlas allow for comparison of different kind of specimens. The samples of glass range from translucent to transparent, matte to mirror, permeable to opaque, and light to dark (Figure 1). Figure 1. Atlas of cesia made of glass. Left and center: a specimen is being compared against the translucent and transparent samples. Right: the opaque samples, from matte to mirror. 2. THE ATLAS MADE WITH PAINTS Now we want to present a new atlas of cesia produced with painted samples that is being developed. The atlas consists of 5 pages with 25 samples each, that is to say, a total of 125 samples. The samples in every page have a different degree of perceived permeability to light, from the opaque samples (1st page) to the transparent ones (5th page), passing through samples with different degree of perceived turbidity (Figure 2). Furthermore, in each page, the variation of darkness and the variation of diffusivity occur. For rather opaque objects, darkness goes from very light or white to very dark or black, and diffusivity goes from glossy to matte. For rather transparent objects, darkness goes from very clear to very dark or black, and diffusivity goes from crystalline to translucent. The notation for the three variables, permeability / darkness / diffusivity, goes from 0 to 1 or 0% to 100%. Figure 2. Scheme of development of the atlas, from the opaque samples to the permeable or transparent ones. In vertical, the variation of darkness. The variation of diffusivity (not shown here) occurs in horizontal, in each page. All the samples are being produced by mixing 9 kinds of paints: alkyd enamel of white color (in matte, satin, and glossy finish), alkyd enamel of black color (also in matte, satin, and glossy finish), and clear alkyd varnish (in matte, satin, and glossy finish). The samples are painted on an opacity display and extended with a bird film applicator on a surface in which a pump has made vacuum (Figure 3). 114

Figure 3. Some of the materials and elements used to produce the samples. These paints are mixed according to established proportions following arithmetic scales or scales derived from a power function (Stevens law): sensation = k. stimulusβ (Stevens 1975). A hypothesis is made for each kind of scale as to what are the β exponents that better work in each case. Then, the mixtures of paints are produced following the corresponding proportions and the samples are painted. And finally, when a scale of 5 steps has been completed, the whole scale is assessed visually to verify the regularity of the intervals and steps. If not approved, a new exponent β is tried and the whole procedure is repeated. According to our results, scales of darkness follow a power function with β = 0.4, mixing black and white (for the opaque samples). The power function with β = 0.4 also works mixing black and varnish (for the transparent samples), and mixing black, white and varnish (for the intermediate permeabilities). In these intermediate permeabilities, white is used to increase turbidity on the varnish. Scales of diffusivity are made by mixing the glossy paints with the satin paints, and the satin paints with the matte paints to obtain the intermediate degrees. These mixtures give correct results if they are made in a half and half proportion. Figures 4 to 6 show some of the results achieved at this moment. This work is still in progress, and the final results will allow us to compare the atlas made of pieces of glass in 1997 with the present one made with paints, and speculate about the possibilities of cesia for different kind of materials. Figure 4. Page of opaque samples, with the variation of darkness and diffusivity. For this photograph, an object has been placed on each sample so as to appreciate the variation of diffusivity (more evident in the dark zone). 115

Figure 5. Five steps of permeability. Even when it cannot be appreciated in the photograph, the variation of diffusivity occurs in vertical for each step. With the addition of the variation in darkness, each of these scales originates, in turn, a whole page like the one in Figure 4. Figure 6. The variation of darkness for a transparent sample (permeability 1), with a certain degree of diffusivity (in this case, diffusivity 0). REFERENCES Caivano, J. 1991. Cesia: A system of visual signs complementing color. Color Research and Application 16 (4): 258-268.. 1993. Appearance (cesia): Variables, scales, solid. In Color 93, Proceedings of the 7th Congress of the International Color Association, vol. B, ed. A. Nemcsics and J. Schanda. Budapest: Hungarian National Color Committee, 89-93.. 1994. Appearance (cesia): Construction of scales by means of spinning disks. Color Research and Application 19 (5): 351-362.. 1996. Cesia: Its relation to color in terms of the trichromatic theory. Die Farbe 42 (1/3): 51-63. Caivano, J., and P. Doria. 1997. An atlas of cesia with physical samples. In AIC Color 97, Proceedings of the 8th Congress of the International Color Association, vol. I. Kyoto: The Color Science Association of Japan, 499-502. Stevens, S. S. 1975. Psychophysics. New York: John Wiley & Sons. Address: José Luis Caivano, Programa Color, SICyT-FADU-UBA Ciudad Universitaria Pab. 3 piso 4, C1428BFA Buenos Aires, Argentina E-mails: caivano@fadu.uba.ar, menghii@sherwin.com.ar, iadisernian@sherwin.com.ar 116