HMI Components. Series

Similar documents
HMI Components. Series. Raised design PCB (with adaptor) Machinery and Automation. Indicator Illuminated pushbutton

HMI Components. Series. Flush design Raised design PCB (with adaptor) Indicator Pushbutton Illuminated pushbutton

3mm LED CBI Circuit Board Indicator.200 High LED Centerline 551-xx07

568-0x0x-xxx. 3mm LED CBI Circuit Board Indicator Quad-Level x 0 x - x x x

Q6 series. Ø6 mm panel mount LED indicators DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS MOUNTING LED INDICATORS

550-xx mm LED CBI. Circuit Board Indicator Square Back Housing, Tri-Block x x x 3

550-xx mm LED CBI. Circuit Board Indicator Sloped Back Housing, Quad Block x x x 4

550-xx07. 5mm LED CBI Circuit Board Indicator Sloped Back Housing with Standoffs x x Features

APEM COMPONENTS LIMITED

RockAIR LED Information

SURFACE MOUNT LED RED/GREEN, 1210 PACKAGE

LED Lighting - Error Consideration for Illuminance Measurement

Series + accesories DLA

Data Sheet. ASMT-Lx50 Flexible Light Strip Module. Features. Description. Applications

Coil. Coil L 12 VDC 135 C 18 W 7.7 Ω M M 24 VDC 135 C 18 W 31 Ω M AMP Junior (AJ variant) Coil

Operator Heads: ø 22mm

DENISON HYDRAULICS Proportional Pressure Control Valves

Resistor LED for 12 V Supply Voltage

Installation and Operating Instructions for Phase Demodulator Type _.2

CAMTO. Arc detecting relay. system. January Revised August D D1200

Recommended Land Pattern: [mm]

Installation and Operational Instructions for ROBA -switch Type 017._00.2

Installation and Operational Instructions for ROBA -switch Type 017._00.2

Optical laser distance sensors. Dimensioned drawing

3mm (T1) Package Discrete LED YELLOW/GREEN, Tri-Color Bi-Color

Express Delivery. Axial. Connection

Data Sheet. HDSP-C1x1/C1x3 1.0 Single Digit PCB Based LED Display. Description. Features. Package Dimensions. Ordering Information

Recommended Land Pattern: [mm] Optical Properties: 3,5 ±0,2 3,2 ±0,2

Indicator actuator, white bezel, IP40 front protection, 16mm mounting - Indicator element, mounting flange and LED needed for complete unit

3mm (T1) Package Discrete LED YELLOW/GREEN, Bi-Color

Measuring current transformers of the W AB(P) series

Recommended Land Pattern: [mm]

DRAFT. Absolute Maximum Ratings (Ambient Temperature 25 C): Dimensions: [mm] Recommended Land Pattern: [mm] Optical Properties: Schematic:

Product Discontinuation Notices

Recommended Land Pattern: [mm]

PIR6WT-1Z interface - time relays

Data Sheet. Description. Features. Applications

High Efficiency LED in Ø 3 mm Tinted Non-Diffused Package

3mm (T1) Package Discrete LED YELLOW/GREEN, Bi-Color

A W - A 2A R - 24D - 1

BTS256-E WiFi - mobile light meter for photopic and scotopic illuminance, EVE factor, luminous color, color rendering index and luminous spectrum.

3mm (T1) Package Discrete LED YELLOW/GREEN, Tri-Color Bi-Color

SPEC NO: DSAB8533 REV NO: V.19A DATE: AUG/16/2014 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED:

Control Stations ø 22

3mm 5mm (T1) ¾) Package Discrete LED

Recommended Land Pattern: [mm]

PLCC4 SMD Top View Package LED SMP4-RGB, RED/GREEN/BLUE

Solid-state Timer H3DS

SOLID STATE LED LAMP RECTANGULAR 2 X 5 mm LED LAMPS

Description. Kingbright

EVERLIGHT ELECTRONICS CO.,LTD.

LITE-ON TECHNOLOGY CORPORATION

Electrical and Optical Characteristics

SURFACE MOUNT LED LAMP SUPER BRIGHT 0805

Q-SWITCHED LASERS. Engineered Reliability. Rugged Design. No Water. Applications. Features

Complete units: Mushroom heads ø 22mm

Complete units: Push-buttons ø 22mm

Incremental encoders Blind or through hollow shaft ø12 mm pulses per revolution

ADC5000 SERIES. AC/DC Switch Mode Power Supplies and Rectifiers for Industrial and Telecom Applications. 60W, 125W and 250 W

Data Sheet. HDSM-291x/293x (7.0mm) Dual digit surface mount LED display. Features. Description. Package Dimensions. Ordering Information

Electronic plugs for valves MSE

LED Tester BTS256-LED

Descriptions. Kingbright

Phone: Fax: Web: -

Descriptions. Kingbright

PRODUCT DATA SHEET FEATURES

High Intensity LED, Ø 5 mm Untinted Non-Diffused Package

EAPL2214GA0-AM. SMD Mini Top View LEDs PRELIMINARY. Features. Applications.

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT

Description. Kingbright

Spectroradiometer CS-2000/2000A. The world's top-level capability spectroradiometers make further advances with addition of second model to lineup.

High Efficiency LED in Ø 3 mm Clear Package

Data Sheet 1210 SMD LED Module LED

Model Number Structure. Ordering Information. Solid-state Power OFF-delay Timer H3DE-H. Model Number Legend. List of Models

TLRG4420CU, TLRH4420CU, TLRO4420CU, TLRY4420CU Resistor LED for 12 V Supply Voltage

LTH5MM12V Series 5mm (T-1 3/4) Through Hole LED Built in Resistor for 12VDC

AHU. Specifications. Materials. Ordering Information E UL Approved Illuminated Pushbutton. page 1

Laser light scanner with background suppression. Dimensioned drawing

Rectangular Package Discrete LED RED/GREEN, 2 x 5 mm, Bi-Color

Circuit diagram. Applications. Function. Function (Continued) Page 23 SNO 4062K /K-A /KM /KM-A

PUSHBUTTON SWITCH / SELECTOR SWITCH / ILLUMINATED PUSHBUTTON SWITCH PSA, LPSA TYPE

EVERLIGHT ELECTRONICS CO., LTD

HMI Components. Series. Front mounting Glass mounting. Illuminated pushbutton Indicator Warning indicator Emergency call button. Public transportation

Spectroradiometer CS-2000/2000A. The world's top-level capability spectroradiometers make further advances with addition of second model to lineup.

FOCAL ADVANTAGES DESCRIPTION CHARACTERISTICS

GENERAL Line - High Efficiency

Complete units: Selector switches ø 22mm

High-Intensity LED in Plastic T-1¾ Package

Bridgelux Vesta Series Tunable White 9mm Array. Product Data Sheet DS152

Overview of types. Technical data

HDSP-4830/4840/4850, HDSP-4832/4836 & HLCP-J Element Bar Graph Array. Features

Recommended Land Pattern: [mm]

Description. Kingbright

SURFACE MOUNT LED LAMP 0805 Chip Type - Water Clear

High Efficiency LED in Ø 3 mm Tinted Diffused Package

Absolute encoders - SSI

SMD Mini Top LEDs Y2SC-A0R1S2B7E-2T8-AM

Brake Unit. Contents. Brake Unit Overview Product information C-26 C-27

1 S C 3528 V2G4 0 C D 02

Radar Scanner CRAT20-11/11 - normal beam angle - long range

Transcription:

Edition 03/2013 HMI Components Series Characteristics The Series are LEDs for use with all EAO s illuminated switches (as accessories). The following pages show a representative selection of LEDs.

Content Overview Illumination LED T1 3/4 MG 4 Single-LED T5.5 6 Single-LED T6.8 8 LED BA9s LED BA9s Fail Safe 12 Accessories 14 Technical data 16 Application guidelines 17 Index 18 3

Illumination LED T1 3/4 MG 16 max. Ø6.1 max. Product can differ from the current configuration. Dimensions [mm] Additional Information A suitable lamp remover Part No. 61-9740.0 (Series Swisstac Part No. 300-0002-00) When using AC/DC types with AC operation, slight flickering can occure Luminous intensity data of the LEDs on direct voltage Electrical and optical data are measured at 25 C If the 24VDC Bi-colour lamp is driven with normal polarity (plus on middle contact of the lamp) the first mentioned colour will light up, with inverted polarity the second colour will ligth up The specified versions are built with a protection diode (halve wave rectifier) in series and the LED Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination LED colour Operating voltage Operation current Lumi. intensity Dom. wavelength Part No. Weight Single-LED Single-LED red 6 VDC + % 15 ma ±15 % 350 mcd 630 nm -2J06.3142 0.002 kg 12 VAC/DC + % 7/14 ma ±15 % 330 mcd 630 nm -2J09.62 0.002 kg 24 VAC/DC + % 7/14 ma ±15 % 330 mcd 630 nm -2J12.62 0.002 kg 28 VAC/DC + % 7/14 ma ±15 % 330 mcd 630 nm -2J13.62 0.002 kg 48 VAC/DC + % 4/8 ma ±15 % 200 mcd 630 nm -2J19.42 0.002 kg Single-LED yellow 6 VDC + % 15 ma ±15 % 300 mcd 587 nm -2J06.3144 0.002 kg 12 VAC/DC + % 7/14 ma ±15 % 280 mcd 587 nm -2J09.64 0.002 kg 24 VAC/DC + % 7/14 ma ±15 % 280 mcd 587 nm -2J12.64 0.002 kg 28 VAC/DC + % 7/14 ma ±15 % 280 mcd 587 nm -2J13.64 0.002 kg 48 VAC/DC + % 4/8 ma ±15 % 180 mcd 587 nm -2J19.44 0.002 kg Single-LED green 6 VDC + % 7 ma ±15 % 50 mcd 525 nm -2J06.3145 0.002 kg 12 VAC/DC + % 4/7 ma ±15 % 50 mcd 525 nm -2J09.65 0.002 kg 24 VAC/DC + % 4/7 ma ±15 % 50 mcd 525 nm -2J12.65 0.002 kg 28 VAC/DC + % 4/7 ma ±15 % 50 mcd 525 nm -2J13.65 0.002 kg 48 VAC/DC + % 2/4 ma ±15 % 600 mcd 525 nm -2J19.45 0.002 kg 4

Illumination LED colour Operating voltage Operation current Lumi. intensity Dom. wavelength Part No. Weight Single-LED blue 6 VDC + % 15 ma ±15 % 680 mcd 470 nm -2J06.3146 0.002 kg 12 VAC/DC + % 7/14 ma ±15 % 650 mcd 470 nm -2J09.66 0.002 kg 24 VAC/DC + % 7/14 ma ±15 % 650 mcd 470 nm -2J12.66 0.002 kg 28 VAC/DC + % 7/14 ma ±15 % 650 mcd 470 nm -2J13.66 0.002 kg 48 VAC/DC + % 4/8 ma ±15 % 400 mcd 470 nm -2J19.46 0.002 kg Single-LED white 6 VDC + % 15 ma ±15 % 750 mcd x0.31/y0.32 nm -2J06.3149 0.002 kg 12 VAC/DC + % 7/14 ma ±15 % 700 mcd x0.31/y0.32 nm -2J09.69 0.002 kg 24 VAC/DC + % 7/14 ma ±15 % 700 mcd x0.31/y0.32 nm -2J12.69 0.002 kg 28 VAC/DC + % 7/14 ma ±15 % 700 mcd x0.31/y0.32 nm -2J13.69 0.002 kg 48 VAC/DC + % 4/8 ma ±15 % 400 mcd x0.31/y0.32 nm -2J19.49 0.002 kg Bi-colour LED Bi-colour LED red/green 24 VDC + % 15/14 ma ±15 % 600/630 mcd 625/525 nm -A312.314A 0.002 kg 5

Illumination Single-LED T5.5 30 max. + Ø6 max. Product can differ from the current configuration. Dimensions [mm] Additional Information A suitable LED remover Part No. 02-906 (Series Swisstac Part No. 300-0002-00) When fitting the LED elements pay attention to the polarity. An instruction can be found in the chapter «Application guidelines» of the corresponding series When using AC/DC types with AC operation, slight flickering can occure Electrical and optical data are measured at 25 C Luminous intensity data of the LEDs on direct voltage The specified versions are built with a protection diode (halve wave rectifier) in series and the LED Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination LED colour Operating voltage Operation current Lumi. intensity Dom. wavelength Part No. Weight Single-LED Single-LED red 6 VDC + % 15 ma ±15 % 350 mcd 630 nm -26.3142 0.001 kg 12 VAC/DC + % 7/14 ma ±15 % 330 mcd 630 nm -29.62 0.001 kg 24 VAC/DC + % 7/14 ma ±15 % 330 mcd 630 nm -2112.62 0.001 kg 28 VAC/DC + % 7/14 ma ±15 % 330 mcd 630 nm -2113.62 0.001 kg 48 VAC/DC + % 4/8 ma ±15 % 200 mcd 630 nm -2119.42 0.001 kg Single-LED yellow 6 VDC + % 15 ma ±15 % 300 mcd 587 nm -26.3144 0.001 kg 12 VAC/DC + % 7/14 ma ±15 % 280 mcd 587 nm -29.64 0.001 kg 24 VAC/DC + % 7/14 ma ±15 % 280 mcd 587 nm -2112.64 0.001 kg 28 VAC/DC + % 7/14 ma ±15 % 280 mcd 587 nm -2113.64 0.001 kg 48 VAC/DC + % 4/8 ma ±15 % 180 mcd 587 nm -2119.44 0.001 kg Single-LED green 6 VDC + % 7 ma ±15 % 50 mcd 525 nm -26.3145 0.001 kg 12 VAC/DC + % 4/7 ma ±15 % 50 mcd 525 nm -29.65 0.001 kg 24 VAC/DC + % 4/7 ma ±15 % 50 mcd 525 nm -2112.65 0.001 kg 28 VAC/DC + % 4/7 ma ±15 % 50 mcd 525 nm -2113.65 0.001 kg 48 VAC/DC + % 2/4 ma ±15 % 600 mcd 525 nm -2119.45 0.001 kg 6

Illumination LED colour Operating voltage Operation current Lumi. intensity Dom. wavelength Part No. Weight Single-LED blue 6 VDC + % 15 ma ±15 % 680 mcd 470 nm -26.3146 0.001 kg 12 VAC/DC + % 7/14 ma ±15 % 650 mcd 470 nm -29.66 0.001 kg 24 VAC/DC + % 7/14 ma ±15 % 650 mcd 470 nm -2112.66 0.001 kg 28 VAC/DC + % 7/14 ma ±15 % 650 mcd 470 nm -2113.66 0.001 kg 48 VAC/DC + % 4/8 ma ±15 % 400 mcd 470 nm -2119.46 0.001 kg Single-LED white 6 VDC + % 15 ma ±15 % 750 mcd x0.31/y0.32 nm -26.3149 0.001 kg 12 VAC/DC + % 7/14 ma ±15 % 700 mcd x0.31/y0.32 nm -29.69 0.001 kg 24 VAC/DC + % 7/14 ma ±15 % 700 mcd x0.31/y0.32 nm -2112.69 0.001 kg 28 VAC/DC + % 7/14 ma ±15 % 700 mcd x0.31/y0.32 nm -2113.69 0.001 kg 48 VAC/DC + % 4/8 ma ±15 % 400 mcd x0.31/y0.32 nm -2119.49 0.001 kg 7

Illumination Single-LED T6.8 45 max. + Ø7.1 max. Product can differ from the current configuration. Dimensions [mm] Additional Information A suitable LED remover Part No. 03-996 When fitting the LED elements pay attention to the polarity. An instruction can be found in the chapter «Application guidelines» of the corresponding series When using AC/DC types with AC operation, slight flickering can occure Luminous intensity data of the LEDs on direct voltage Electrical and optical data are measured at 25 C The specified versions are built with a protection diode (halve wave rectifier) in series and the LED Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination LED colour Operating voltage Operation current Lumi. intensity Dom. wavelength Part No. Weight Single-LED Single-LED red 6 VDC + % 17 ma ±15 % 400 mcd 630 nm -2K06.3152 0.002 kg 12 VAC/DC + % 9/17 ma ±15 % 400 mcd 630 nm -2K09.72 0.002 kg 24 VAC/DC + % 9/17 ma ±15 % 400 mcd 630 nm -2K12.72 0.002 kg 28 VAC/DC + % 9/17 ma ±15 % 400 mcd 630 nm -2K13.72 0.002 kg 48 VAC/DC + % 4/8 ma ±15 % 200 mcd 630 nm -2K19.52 0.002 kg Single-LED yellow 6 VDC + % 17 ma ±15 % 340 mcd 340 nm -2K06.3154 0.002 kg 12 VAC/DC + % 9/17 ma ±15 % 340 mcd 340 nm -2K09.74 0.002 kg 24 VAC/DC + % 9/17 ma ±15 % 340 mcd 340 nm -2K12.74 0.002 kg 28 VAC/DC + % 9/17 ma ±15 % 340 mcd 340 nm -2K13.74 0.002 kg 48 VAC/DC + % 4/8 ma ±15 % 180 mcd 340 nm -2K19.54 0.002 kg Single-LED green 6 VDC + % 7 ma ±15 % 50 mcd 525 nm -2K06.3155 0.002 kg 12 VAC/DC + % 4/7 ma ±15 % 50 mcd 525 nm -2K09.75 0.002 kg 24 VAC/DC + % 4/7 ma ±15 % 50 mcd 525 nm -2K12.75 0.002 kg 28 VAC/DC + % 4/7 ma ±15 % 50 mcd 525 nm -2K13.75 0.002 kg 48 VAC/DC + % 2/4 ma ±15 % 600 mcd 525 nm -2K19.55 0.002 kg 8

Illumination LED colour Operating voltage Operation current Lumi. intensity Dom. wavelength Part No. Weight Single-LED blue 6 VDC + % 17 ma ±15 % 780 mcd 470 nm -2K06.3156 0.002 kg 12 VAC/DC + % 9/17 ma ±15 % 780 mcd 470 nm -2K09.76 0.002 kg 24 VAC/DC + % 9/17 ma ±15 % 780 mcd 470 nm -2K12.76 0.002 kg 28 VAC/DC + % 9/17 ma ±15 % 780 mcd 470 nm -2K13.76 0.002 kg 48 VAC/DC + % 4/8 ma ±15 % 400 mcd 470 nm -2K19.56 0.002 kg Single-LED white 6 VDC + % 17 ma ±15 % 850 mcd x0.31/y0.32 nm -2K06.3159 0.002 kg 12 VAC/DC + % 9/17 ma ±15 % 850 mcd x0.31/y0.32 nm -2K09.79 0.002 kg 24 VAC/DC + % 9/17 ma ±15 % 850 mcd x0.31/y0.32 nm -2K12.79 0.002 kg 28 VAC/DC + % 9/17 ma ±15 % 850 mcd x0.31/y0.32 nm -2K13.79 0.002 kg 48 VAC/DC + % 4/8 ma ±15 % 400 mcd x0.31/y0.32 nm -2K19.59 0.002 kg 9

Illumination LED BA9s 25 max. Ø max. Product can differ from the current configuration. Dimensions [mm] Additional Information A suitable LED remover Part No. 700.006.0 (Series 44 Part No. 44-935) Luminous intensity data of the LEDs on direct voltage Electrical and optical data are measured at 25 C The specified 6 VDC, 24 VDC Bi-colour; 130 VAC, 130 DC und 230 VAC versions are built with a protection diode The specified 12, 24, 28, 48 VAC/DC versions are built with a bridge rectifier If the 24VDC Bi-colour lamp is driven with normal polarity (plus on middle contact of the lamp) the first mentioned colour will light up, with inverted polarity the second colour will ligth up The specified 130 VAC types are developed to run on a supply voltage of 130 VAC only. An operation at a higher supply voltage using commercial lampholders with integrated resistors, is not approved Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination LED colour Operating voltage Operation current Lumi. intensity Dom. wavelength Part No. Weight Single-LED Single-LED red 6 VDC + % 17 ma ±15 % 400 mcd 630 nm -2506.82 0.002 kg 12 VAC/DC + % 16 ma ±15 % 390 mcd 630 nm -2509.1142 0.002 kg 24 VAC/DC + % 15 ma ±15 % 350 mcd 630 nm -2512.1142 0.002 kg 28 VAC/DC + % 13 ma ±15 % 300 mcd 630 nm -2513.1142 0.002 kg 48 VAC/DC + % 8 ma ±15 % 200 mcd 630 nm -2519.52 0.002 kg 130 VDC + % 3 ma ±15 % 120 mcd 630 nm -2524.3042 0.002 kg 130 VAC + % 5 ma ±15 % 180 mcd 630 nm -2H24.2052 0.002 kg 230 VAC + % 3 ma ±15 % 120 mcd 630 nm -2H25.2042 0.002 kg Single-LED yellow 6 VDC + % 17 ma ±15 % 340 mcd 587 nm -2506.84 0.002 kg 12 VAC/DC + % 16 ma ±15 % 340 mcd 587 nm -2509.1144 0.002 kg 24 VAC/DC + % 15 ma ±15 % 300 mcd 587 nm -2512.1144 0.002 kg 28 VAC/DC + % 13 ma ±15 % 270 mcd 587 nm -2513.1144 0.002 kg 48 VAC/DC + % 8 ma ±15 % 180 mcd 587 nm -2519.54 0.002 kg 130 VDC + % 3 ma ±15 % 1 mcd 587 nm -2524.3044 0.002 kg

Illumination LED colour Operating voltage Operation current Lumi. intensity Dom. wavelength Part No. Weight Single-LED yellow 130 VAC + % 5 ma ±15 % 160 mcd 587 nm -2H24.2054 0.002 kg 230 VAC + % 3 ma ±15 % 1 mcd 587 nm -2H25.2044 0.002 kg Single-LED green 6 VDC + % 7 ma ±15 % 50 mcd 525 nm -2506.85 0.002 kg 12 VAC/DC + % 7 ma ±15 % 50 mcd 525 nm -2509.1145 0.002 kg 24 VAC/DC + % 7 ma ±15 % 50 mcd 525 nm -2512.1145 0.002 kg 28 VAC/DC + % 7 ma ±15 % 50 mcd 525 nm -2513.1145 0.002 kg 48 VAC/DC + % 4 ma ±15 % 600 mcd 525 nm -2519.55 0.002 kg 130 VDC + % 2 ma ±15 % 300 mcd 525 nm -2524.3045 0.002 kg 130 VAC + % 3 ma ±15 % 450 mcd 525 nm -2H24.2055 0.002 kg 230 VAC + % 2 ma ±15 % 300 mcd 525 nm -2H25.2045 0.002 kg Single-LED blue 6 VDC + % 17 ma ±15 % 780 mcd 470 nm -2506.86 0.002 kg 12 VAC/DC + % 16 ma ±15 % 720 mcd 470 nm -2509.1146 0.002 kg 24 VAC/DC + % 15 ma ±15 % 680 mcd 470 nm -2512.1146 0.002 kg 28 VAC/DC + % 13 ma ±15 % 590 mcd 470 nm -2513.1146 0.002 kg 48 VAC/DC + % 8 ma ±15 % 400 mcd 470 nm -2519.56 0.002 kg 130 VDC + % 3 ma ±15 % 200 mcd 470 nm -2524.3046 0.002 kg 130 VAC + % 5 ma ±15 % 230 mcd 470 nm -2H24.2056 0.002 kg 230 VAC + % 3 ma ±15 % 200 mcd 470 nm -2H25.2046 0.002 kg Single-LED white 6 VDC + % 17 ma ±15 % 850 mcd x0.31/y0.32 nm -2506.89 0.002 kg 12 VAC/DC + % 16 ma ±15 % 800 mcd x0.31/y0.32 nm -2509.1149 0.002 kg 24 VAC/DC + % 15 ma ±15 % 750 mcd x0.31/y0.32 nm -2512.1149 0.002 kg 28 VAC/DC + % 13 ma ±15 % 650 mcd x0.31/y0.32 nm -2513.1149 0.002 kg 48 VAC/DC + % 8 ma ±15 % 400 mcd x0.31/y0.32 nm -2519.59 0.002 kg 130 VDC + % 3 ma ±15 % 150 mcd x0.31/y0.32 nm -2524.3049 0.002 kg 130 VAC + % 5 ma ±15 % 250 mcd x0.31/y0.32 nm -2H24.2059 0.002 kg 230 VAC + % 3 ma ±15 % 150 mcd x0.31/y0.32 nm -2H25.2049 0.002 kg Bi-colour LED Bi-colour LED red/green 24 VDC + % 15 ma ±15 % 1200/900 mcd 625/525 nm -2H12.314A 0.002 kg Bi-colour LED red/yellow 24 VDC + % 15 ma ±15 % 1200/550 mcd 625/589 nm -2H12.314B 0.002 kg Bi-colour LED yellow/green 24 VDC + % 15 ma ±15 % 900/550 mcd 525/589 nm -2H12.314C 0.002 kg 11

Illumination LED BA9s Fail Safe 25 max. Ø max. Product can differ from the current configuration. Dimensions [mm] Additional Information A suitable LED remover Part No. 700.006.0 (Series 44 Part No. 44-935) Luminous intensity data of the LEDs on direct voltage Electrical and optical data are measured at 25 C The specified 72 and 1 VAC/VDC versions are built with a protection diode Specified 72 and 1 VAC/VDC versions are built with a bridge rectifier In case one LED fails, the other pair of still functioning LED s is working. The light output then is half in order to indicate the malfunction and shows this way the need for replacement Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination LED colour Operating voltage Operation current Lumi. intensity Dom. wavelength Part No. Wiring diagram Weight Multi-LED Fail Safe Multi-LED rot 72 VDC + % 2.2 ma ±15 % 4 x 190 mcd 625 nm -4H21.32P 1 0.002 kg 1 VDC + % 2 ma ±15 % 4 x 170 mcd 625 nm -4H22.32P 1 0.002 kg Multi-LED yellow 72 VDC + % 2.2 ma ±15 % 4 x 190 mcd 589 nm -4H21.34P 1 0.002 kg 1 VDC + % 2 ma ±15 % 4 x 170 mcd 589 nm -4H22.34P 1 0.002 kg Multi-LED green 72 VDC + % 2.2 ma ±15 % 4 x 120 mcd 525 nm -4H21.35P 1 0.002 kg 1 VDC + % 2 ma ±15 % 4 x 170 mcd 525 nm -4H22.35P 1 0.002 kg Multi-LED blue 72 VDC + % 2.2 ma ±15 % 4 x 30 mcd 465 nm -4H21.36P 1 0.002 kg 1 VDC + % 2 ma ±15 % 4 x 25 mcd 465 nm -4H22.36P 1 0.002 kg Multi-LED white 72 VDC + % 2.2 ma ±15 % 4 x 160 mcd -4H21.39P 1 0.002 kg 1 VDC + % 2 ma ±15 % 4 x 145 mcd -4H22.39P 1 0.002 kg 12

Illumination Bridge rectifier Wiring diagram 1 13

Accessories Illumination LED remover for T1 3/4 MG Additional Information p Caution: A switching process might be released when replacing the lamp Product attribute Part No. Weight LED remover für series 22, 31, 41, 51, 61, 71 61-9740.0 0.003 kg for series Swisstac 300-0002-00 0.003 kg LED remover for T5.5 Additional Information p Caution: A switching process might be released when replacing the lamp Product attribute Part No. Weight LED remover for series 01, 14 02-906 0.002 kg LED remover for T6.8 Additional Information p Caution: A switching process might be released when replacing the lamp Product attribute Part No. Weight LED remover for series 02, 03 03-996 0.027 kg 14

LED remover for BA9s Accessories Additional Information p Caution: A switching process might be released when replacing the lamp Product attribute Part No. Weight LED remover for series 04 700.006.0 0.003 kg LED remover for series 44 44-935 0.037 kg 15

Technical data Technical Data Electrical characteristics Operating voltage tolerance + % Mechanical characteristics Environmental conditions Storage temperature -25 C +80 C Service temperature -20 C +60 C Standards Lamp base Base Standard T1 3/4 MG DIN EN 60061-1: S5,7s T5.5 DIN 49601 T6.8 DIN 49601 BA9s DIN EN 60061-1: BA9s EAO reserves the right to alter specifications without further notice. 16

Application guidelines LED used in Base Series T 1 3/4 T 5.5 T 6.8 BA9s 02 03 04 14 22 31 44 51 55 Swisstac 61 71 17

Index Index from Part No. Part No. Page Part No. Page 02-906... 14 03-996... 14-26.3142... 6-26.3144... 6-26.3145... 6-26.3146... 7-26.3149... 7-29.62... 6-29.64... 6-29.65... 6-29.66... 7-29.69... 7-2112.62... 6-2112.64... 6-2112.65... 6-2112.66... 7-2112.69... 7-2113.62... 6-2113.64... 6-2113.65... 6-2113.66... 7-2113.69... 7-2119.42... 6-2119.44... 6-2119.45... 6-2119.46... 7-2119.49... 7-2506.82... -2506.84... -2506.85... 11-2506.86... 11-2506.89... 11-2509.1142... -2509.1144... -2509.1145... 11-2509.1146... 11-2509.1149... 11-2512.1142... -2512.1144... -2512.1145... 11-2512.1146... 11-2512.1149... 11-2513.1142... -2513.1144... -2513.1145... 11-2513.1146... 11-2513.1149... 11-2519.52... -2519.54... -2519.55... 11-2519.56... 11-2519.59... 11-2524.3042... -2524.3044... -2524.3045... 11-2524.3046... 11-2524.3049... 11-2H12.314A... 11-2H12.314B... 11-2H12.314C... 11-2H24.2052... -2H24.2054... 11-2H24.2055... 11-2H24.2056... 11-2H24.2059... 11-2H25.2042... -2H25.2044... 11-2H25.2045... 11-2H25.2046... 11-2H25.2049... 11-2J06.3142... 4-2J06.3144... 4-2J06.3145... 4-2J06.3146... 5-2J06.3149... 5-2J09.62... 4-2J09.64... 4-2J09.65... 4-2J09.66... 5-2J09.69... 5-2J12.62... 4-2J12.64... 4-2J12.65... 4-2J12.66... 5-2J12.69... 5-2J13.62... 4-2J13.64... 4-2J13.65... 4-2J13.66... 5-2J13.69... 5-2J19.42... 4-2J19.44... 4-2J19.45... 4-2J19.46... 5-2J19.49... 5-2K06.3152... 8-2K06.3154... 8-2K06.3155... 8-2K06.3156... 9-2K06.3159... 9-2K09.72... 8-2K09.74... 8-2K09.75... 8-2K09.76... 9-2K09.79... 9-2K12.72... 8-2K12.74... 8-2K12.75... 8-2K12.76... 9-2K12.79... 9-2K13.72... 8-2K13.74... 8-2K13.75... 8-2K13.76... 9-2K13.79... 9-2K19.52... 8-2K19.54... 8-2K19.55... 8-2K19.56... 9-2K19.59... 9-4H21.32P... 12-4H21.34P... 12-4H21.35P... 12-4H21.36P... 12-4H21.39P... 12-4H22.32P... 12-4H22.34P... 12-4H22.35P... 12-4H22.36P... 12-4H22.39P... 12 -A312.314A... 5 300-0002-00... 14 44-935... 15 61-9740.0... 14 700.006.0... 15 18