Frohe Weihnachten - Merry Christmas - Feliz Navidad - Joyeux Noël - Boas Festas s - Vrolijk Kerstfeest - Hyvää Joulua Unique multi-talented system that home workers dream about and that impresses the professionals MERRY PRICES WABECO CHRISTMAS PROMOTION FREE DELIVERY within Germany from an order value of 50.00 and a max. weight up to 40 kg
Sent from above WABECO precision drilling milling stands Special features WABECO drilling milling stand for vertical and horizontal infeed the second infeed (transverse travel on the Y-axis) enables the performance of vertical and horizontal drilling and milling work base plate made of gray cast iron with T-slots giving flexible and stable workpiece clamping the steel column can be rotated through 360 in the base plate and can be locked in any position, so even larger workpieces can be processed outside the working range with depth stop and retaining spring for always drilling workpieces to exactly the same drilling depth a flexible and space-saving alternative to table drilling machines, pillar drilling machines and column drilling machines 2 Drilling milling stand BF1240 No. 24400 129.99 165.41 Drilling milling stand BF1242 No. 24401 139.99 178.50 especially suited for smaller workpieces for machining larger workpieces Design Solid steel column 500 mm Hexagonal steel boom 350 mm Working range Travel Z-axis 250 mm Travel Y-axis 175 mm heavy duty design Weight 14.1 kg Design Solid steel column 500 mm Hexagonal steel boom 500 mm Working range Travel Z-axis 250 mm Travel Y-axis 325 mm heavy duty design Weight 15.0 kg further information at www.wabeco-remscheid.de
Drilling milling stand BF1243 No. 24500 161.99 204.68 through total height of the steel column of 750 mm is particularly suitable for working with a coordinate table Design Solid steel column 750 mm Hexagonal steel boom 500 mm Working range Travel Z-axis 500 mm Travel Y-axis 325 mm heavy duty design Weight 16.7 kg Drilling milling stand BF1244 No. 24454 217.99 278.46 through total height of the steel column of 1000 mm is particularly suitable for working with very tall workpieces or tools such as Forstner bits Design Solid steel column 1000 mm Hexagonal steel boom 500 mm Working range Travel Z-axis 750 mm Travel Y-axis 325 mm heavy duty design Weight 18.3 kg or in the WABECO catalog 2017 - we shall be pleased to consult with you personally +49 2191 597-0 3
Example of use with 2 drive units only with drilling milling stand BF1244 4 further information at www.wabeco-remscheid.de
Examples of use for turning work 4-spur center for clamping workpieces No. 24486 8.99 14.28 for processing workpieces between two centers without re-clamping for insertion in drive units Shank Ø 10 mm Head Ø 15 mmm NEW NEW Tailstock center for processing long workpieces No. 24484 25.00 32.13 for turning between 2 centers for holding the tailstock center a 2nd machine support no. 24460 and the clamping device no. 22312 are required Face plate for concave turning No. 24482 18.00 23.80 NEW for concave turning, e.g, for bowls and working on the face with 3 set screws to hold the workpiece Shank Ø 10 mm Plate Ø 60 mm Hand steel rest adjustable height No. 24480 59.00 78.54 NEW to support the turning tool the lower section is clamped to the base plate for positioning at the workpiece, fully adjustable Machine support to hold the clamping device No. 24460 20.00 22.61 2nd machine support to hold the clamping device (no. 22312). The clamping device is used for holding the tailstock center Clamping device to hold the tailstock center No. 22312 15.50 17.85 to hold the tailstock center with Euronorm Ø 43 mm or in the WABECO catalog 2017 - we shall be pleased to consult with you personally +49 2191 597-0 5
WABECO 2-axis coordinate tables suitable for all table drilling machines, pillar drilling machines, column drilling machines and drilling stands because the clamping feet can be adapted individually to each brand using the holes and/or longitudinal slots provided the workpieces can be precisely positioned under the tools by moving the X- and Y-axis for precise drilling and milling work the unit can be converted for left-handers 2-axis coordinate table K400 No. 24410 119.99 188.02 Working range Longitudinal travel X-axis 320 mm Transverse travel Y-axis 100 mm Height 105 mm Coordinate table Clamping surface 400 x 180 mm 2-axis coordinate table K600 No. 24610 139.99 223.72 Working range Longitudinal travel X-axis 520 mm Transverse travel Y-axis 100 mm Height 105 mm Coordinate table Clamping surface 600 x 180 mm Mounting kit for 2 axis and spindle Y-axis No. 24499 69.90 89.13 Example of use with 2-axis coordinate table K400 for costumer-side mounting of the mountable digital vernier scales to the 2-axis coordinate tables K400 and K600 drilled holes and threads must be added to the coordinate table by the customer Vernier scale mount and bracket for the mountable digital vernier scales X and Y-axis extended spindle for the Y-axis to maintain the travel in the Y-axis and optimum distance between the hand crank and mountable digital vernier scale Mountable digital vernier scales suitable for 2-axis coordinate table K400 and K600 for X-axis measuring length 300 mm for K400 No. 11363 69.00 82.11 for X-axis measuring length 500 mm for K600 No. 11365 99.00 141.61 for Y-axis measuring length 100 mm for K400 and K600 No. 11360 38.00 46.41 6 further information at www.wabeco-remscheid.de
Examples of use Work table for rotating and swiveling workpieces No. 22310 24.00 29.75 Work table Ø 180 mm can be rotated and swiveled through 360 in all directions can be retrofi tted for all drilling stands with columns-ø 35 mm 3-spoke hub for WABECO drilling milling stands No. 24462 19.00 23.68 3-spoke turn wheel for plunging with the Z-axis for fi tting by the customer NEW Clamping device for horizontal mounting of drive units No. 22312 15.50 17.85 suitable for all drive units with Euronorm Ø 43 mm suitable for all drilling stands with Euronorm Ø 43 mm Machine support for the mounting of a second drive unit No. 24460 20.00 22.61 suitable for all drive units with Euronorm Ø 43 mm suitable for all WABECO drilling milling stands or in the WABECO catalog 2017 - we shall be pleased to consult with you personally +49 2191 597-0 7
Examples of use Tapping attachment for positioning the tap at an angle No. 35805 28.00 35.70 Tool holder for taps clamping range 2.0 5.0 mm Adjustable tap wrench size 1½ Adapter for Euronorm Ø 43 mm suitable for all drilling stands with Euronorm Ø 43 mm Thread depth can be adjusted using a positioning ring Steel columns for a longer vertical working range Solid steel column toothed Ø 35 mm suitable for all WABECO drilling milling stands No. 24451 50.00 61.88 Length 750 mm for a longer vertical travel of the Z-axis of 500 mm No. 24452 79.00 92.82 Length 1000 mm for a longer vertical travel of the Z-axis of 750 mm Hexagonal steel boom for larger horizontal travel No. 24453 29.99 39.27 Hexagonal steel boom toothed 30 mm length 500 mm for a longer transverse travel of the Y-axis of 325 mm suitable for WABECO drilling milling stand BF1240 Machine vice with quick adjustment No. 40523 22.99 29.75 with double pillar guide with rubber protective jaws with horizontal and vertical v-block for round material open base plate for clamping or through-drilling of the workpieces Trapezoidal thread spindle Jaw width 100 mm Clamping width 100 mm Jaw height 35 mm 8 further information at www.wabeco-remscheid.de
Examples of use Machine vices made of gray cast iron with horizontal and vertical v-block for round material open base plate for clamping or through-drilling of the workpieces Trapezoidal thread spindle No. 40526 Jaw width 85 mm Clamping width 70 mm Jaw height 22 mm No. 40527 Jaw width 100 mm Clamping width 100 mm Jaw height 29 mm 25.00 34.51 30.00 46.41 Step clamp set 58 pieces No. 24417 41.00 69.02 for 10 mm T-slot and M8 thread 12 step blocks with stepped teeth 6 step clamps 6 fl ange nuts 6 T-slot nuts 24 studs 4 extension nuts Step clamp set 10 pieces No. 24412 18.00 21.42 for 10 mm T-slot and M8 thread 2 step blocks with stepped teeth 2 step clamps 2 fl ange nuts 2 T-slot nuts and 2 studs T-slot nuts No. 24429 8.50 9.52 PU: 4 pieces for 10 mm T-slot and M8 thread or in the WABECO catalog 2017 - we shall be pleased to consult with you personally +49 2191 597-0 9
BF1240 BF1242 BF1243 BF1244 Drilling milling stands with work table BF1240 no. 24404 151.99 195.16 BF1242 no. 24408 161.99 208.25 BF1243 no. 24504 183.99 234.43 BF1244 no. 24457 239.99 308.21 Work table for rotating and swiveling workpieces Work table Ø 180 mm can be rotated and swiveled through 360 in all directions e.g. for oblique drilling Drilling milling stands with clamping device BF1240 no. 24550 141.99 182.07 BF1242 no. 24580 151.99 195.16 BF1243 no. 24510 173.99 221.34 Clamping device for horizontal mounting of drive units suitable for all drive units with Euronorm Ø 43 mm Drilling milling stands with 2nd machine support BF1240 no. 24552 147.99 186.83 BF1242 no. 24582 157.99 199.92 BF1243 no. 24514 179.99 224.91 2nd machine support for the mounting of a second drive unit suitable for all drive units with Euronorm Ø 43 mm 10 further information at www.wabeco-remscheid.de
Drilling milling stands with machine vice BF1240 no. 24556 147.99 193.97 BF1242 no. 24586 157.99 207.06 BF1243 no. 24518 179.99 233.24 Machine vice with quick adjustment with double pillar guide Trapezoidal thread spindle Jaw width 100 mm Clamping width 100 mm Jaw height 35 mm Weight 1.6 kg Drilling milling stands with machine vice BF1240 no. 24436 157.99 210.63 BF1242 no. 24445 167.99 223.72 BF1243 no. 24520 189.99 248.71 Machine vice made of gray cast iron Trapezoidal thread spindle Jaw width 100 mm Clamping width 100 mm Jaw height 29 mm Weight 3.3 kg Drilling milling stands with step clamp set 58 pieces BF1240 no. 24437 166.99 233.24 BF1242 no. 24447 176.99 246.33 BF1243 no. 24524 198.99 272.51 Step clamp set for 10 mm T-slot and M8 thread 12 step blocks with stepped teeth 6 step clamps 6 fl ange nuts 6 T-slot nuts 24 studs 4 extension nuts Drilling milling stands with step clamp set 10 pieces BF1240 no. 24414 144.99 185.64 BF1242 no. 24446 154.99 198.73 BF1243 no. 24522 176.99 224.91 Step clamp set for 10 mm T-slot and M8 thread 2 step blocks with stepped teeth 2 step clamps 2 fl ange nuts 2 T-slot nuts 2 studs Drilling milling stands with clamping device and machine vice BF1240 no. 24435 168.99 211.82 BF1242 no. 24448 174.99 224.91 BF1243 no. 24512 196.99 251.09 Clamping device for horizontal mounting of drive units suitable for all drive units with Euronorm Ø 43 mm Machine vice with quick adjustment with double pillar guide Trapezoidal thread spindle Jaw width 100 mm Clamping width 100 mm Jaw height 35 mm Weight 1.6 kg Drilling milling stands with 2nd machine support and machine vice BF1240 no. 24554 168.99 216.58 BF1242 no. 24584 178.99 229.67 BF1243 no. 24516 200.99 255.85 2nd machine support for the mounting of a second drive unit suitable for all drive units with Euronorm Ø 43 mm Machine vice with quick adjustment with double pillar guide Trapezoidal thread spindle Jaw width 100 mm Clamping width 100 mm Jaw height 35 mm Weight 1.6 kg or in the WABECO catalog 2017 - we shall be pleased to consult with you personally +49 2191 597-0 11
BF1240 Drilling milling stands with 2-axis coordinate table K400 BF1240 no. 24558 246.99 352.24 BF1242 no. 24588 256.99 365.33 BF1243 no. 24526 278.99 391.51 BF1244 No. 24458 334.99 466.48 2-axis coordinate table K400 Clamping surface 400 x 180 mm Longitudinal travel X-axis 320 mm Transverse travel Y-axis 100 mm BF1242 BF1243 BF1244 Drilling milling stands with 2-axis coordinate table K400 and machine vice BF1240 no. 24416 271.99 386.75 BF1242 no. 24449 281.99 399.84 BF1243 no. 24528 303.99 426.02 2-axis coordinate table K400 Clamping surface 400 x 180 mm Longitudinal travel X-axis 320 mm Transverse travel Y-axis 100 mm Machine vice made of gray cast iron Trapezoidal thread spindle Jaw width 85 mm Clamping width 70 mm Jaw height 22 mm Weight 2.4 kg BF1243 BF1244 BF1242 BF1240 Drilling milling stands with 2-axis coordinate table K600 BF1240 no. 24560 266.99 389.13 BF1242 no. 24590 276.99 402.22 BF1243 no. 24530 298.99 428.40 BF1244 no. 24459 354.99 502.18 2-axis coordinate table K600 Clamping surface 600 x 180 mm Longitudinal travel X-axis 520 mm Transverse travel Y-axis 100 mm Drilling milling stands with 2-axis coordinate table K600 and machine vice BF1240 no. 24438 296.99 435.54 BF1242 no. 24450 306.99 448.63 BF1243 no. 24529 328.99 474.81 2-axis coordinate table K600 Clamping surface 600 x 180 mm Longitudinal travel X-axis 520 mm Transverse travel Y-axis 100 mmn Machine vice made of gray cast iron Trapezoidal thread spindle Jaw width 100 mm Clamping width 100 mm Jaw height 29 mm Weight 3.3 kg 12 further information at www.wabeco-remscheid.de
K600 K400 2-axis coordinate table with machine vice K400 no. 24432 146.99 233.24 K600 no. 24632 166.99 268.94 Machine vice made of gray cast iron Trapezoidal thread spindle Jaw width 100 mm Clamping width 100 mm Jaw height 29 mm Weight 3.3 kg 2-axis coordinate table with step clamp set 10 pieces K400 no. 24430 134.99 208.25 K600 no. 24630 154.99 243.95 Step clamp set for 10 mm T-slot and M8 thread 2 step blocks with stepped teeth 2 step clamps 2 fl ange nuts 2 T-slot nuts 2 studs 2-axis coordinate table with step clamp set 58 pieces K400 no. 24431 157.99 255.85 K600 no. 24631 177.99 291.55 Step clamp set for 10 mm T-slot and M8 thread 12 step blocks with stepped teeth 6 step clamps 6 fl ange nuts 6 T-slot nuts 24 studs 4 extension nuts Drilling stand B1230 with machine vice No. 22405 79.99 104.72 Machine vice with quick adjustment Jaw width 100 mm Clamping width 100 mm Jaw height 35 mm Weight 1.6 kg Drilling stand B1230 with machine vice No. 22406 86.99 120.19 Machine vice made of gray cast iron Jaw width 100 mm Clamping width 100 mm Jaw height 29 mm Weight 3.3 kg Drilling stand B1230 with machine vice and clamping device No. 22407 94.99 122.57 Machine vice with quick adjustment Jaw width 100 mm Clamping width 100 mm Jaw height 35 mm Weight 1.6 kg or in the WABECO catalog 2017 - we shall be pleased to consult with you personally +49 2191 597-0 13
Disk sanders for metal and wood working No. 14400 199.99 277.65 Design Exhaust nozzle for connection of an exhaust equipment Grinding disk Ø 300 mm (adhesive) Miter gauge swiveling -60 to +60 Technical Details Grinding table 415 x 175 mm swiveling -20 to +45 Drive power 0.9 kw, 230V, 50 Hz Speed 1450 rpm Dimensions without packaging W475 x D440 x H435 mm Weight without packaging 42.0 kg Arbor presses Press force 1t max. size of workpiece 145 mm Weight without packaging 14.6 kg No. 13400 52.99 82.11 Press force 2t max. size of workpiece 215 mm Weight without packaging 38 kg No. 13401 119.90 171.36 Keyway broaches HSS No. 13410 94.00 148.75 Keyway 2x2 and 3x3 Total length 130 mm Guide bushings for bore Ø 6-8 - 10 mm Keyway broaches HSS No. 13411 299.90 439.11 Keyway 4x4 and 5x5 total length 150 mm Keyway 6x6 and 8x7 total length 300 mm Spiral drill bit grinding machine Original Vertex No. 14720 595.00 772.31 Grinding range from 2 to 13 mm 11 collets ranging from Ø 3 to 13 mm with a clamping range up to approx. 0.9 mm below the nominal dimension 1 two-piece collet holder CBN grinding wheel for HSS drill bits Adjusting-screw diameter Guide mount for grinding the point angle Guide mount for grinding fl anks while supplies last Technical data Drive power 0.25 kw, 230 V, 50 Hz Spindle speed 4800 rpm Point angle 90 140 scaled, continuous Dimensions without packaging: W300 x D160 x H115 mm Weight without packaging: 9.0 kg Lever operated sheet metal shears for cutting of sheet metal and profi les Base with four fi xing bores infi nitely adjustable holding-down device Blade length 125 mm Cutting power round steel 11 mm Cutting power sheet metal and steel 6 mm Weight without packaging 9.5 kg No. 55790 69.00 117.81 Blade length 200 mm Blade length 300 mm Cutting power round steel 13 mm Cutting power round steel 13 mm Cutting power sheet metal and steel 6 mm Cutting power sheet metal and steel 6 mm Weight without packaging 17.2 kg Weight without packaging 26.0 kg No. 55791 109.00 177.31 No. 55792 140.00 224.91 14 further information at www.wabeco-remscheid.de
Folding presses for clamping in vices for sheet metal working several folding operations with different distances possible without taking out the sheet Steel sheets up to 1.2 mm Aluminum and copper sheets up to 1.5 mm bending angle max. 120 without workbench vice working range 450 mm No. 55780 99.99 166.60 working range 630 mm No. 55785 113.99 195.16 image: some bending examples with workbench vice 100 mm working range 450 mm No. 55781 123.00 214.20 working range 630 mm No. 55784 134.00 243.95 Workbench vices free of play adjustable guides with pipe gripping jaws Workbench vices with swivel base Workbench vices with aluminum and plastic pipe Jaw width 100 mm clamping width 100 mm No. 40102 50.00 55.93 Jaw width 125 mm clamping width 125 mm No. 40103 75.00 82.11 Jaw width 100 mm clamping width 100 mm No. 40136 69.00 84.49 Jaw width 125 mm clamping width 125 mm No. 40138 95.00 116.62 Jaw width 100 mm clamping width 100 mm No. 40130 62.00 67.83 Jaw width 125 mm clamping width 125 mm No. 40131 89.00 96.39 Aluminum pipe and protective jaws with horizontal v-block for round material Plastic pipe and protective jaws with horizontal and vertical v-block for round material with magnetic adhesion Vice rotating by 360 No. 40503 12.00 17.85 for 100 mm no. 40122 6.30 7.97 for 125 mm no. 40123 7.30 9.16 for 150 mm no. 40124 7.90 10.00 for 100 mm no. 40612 7.20 9.04 for 125 mm no. 40613 8.20 10.35 for 150 mm no. 40614 9.10 11.42 with steel jaws made of gray cast iron Jaw width 50 mm Clamping width 50 mm Clamping depth 32 mm Clamping width of the clamp 50 mm Machine vices made of gray cast iron No. 40526 Jaw width Clamping width Jaw height No. 40527 Jaw width Clamping width Jaw height No. 40528 Jaw width Clamping width Jaw height 85 mm 70 mm 22 mm 100 mm 100 mm 29 mm 125 mm 125 mm 29 mm 25.00 34.51 30.00 46.41 35.00 58.31 Machine vices made of hardened steel all sides ground with prism jaw Accuracy 0.005 mm Workpiece machining on 4 different sides No. 40596 Jaw width Clamping width Jaw height No. 40597 Jaw width Clamping width Jaw height No. 40598 Jaw width Clamping width Jaw height 50 mm 67 mm 25 mm 73 mm 100 mm 35 mm 88 mm 125 mm 40 mm 63.90 86.87 84.90 117.81 125.90 141.61 or in the WABECO catalog 2017 - we shall be pleased to consult with you personally +49 2191 597-0 15
Toolmakers vices made of hardened steel all sides ground with prism jaw Workpiece machining on 4 different sides Pull-down clamping system for high accuracy Accuracy 0.005 mm No. 40588 Jaw width Clamping width Jaw height No. 40590 Jaw width Clamping width Jaw height No. 40591 Jaw width Clamping width Jaw height No. 40592 Jaw width Clamping width Jaw height No. 40594 Jaw width Clamping width Jaw height 25 mm 20 mm 9 mm 48 mm 70 mm 25 mm 63 mm 87 mm 32 mm 88 mm 125 mm 40 mm 125 mm 160 mm 50 mm 29.90 42.84 49.90 73.78 59.90 85.68 89.90 124.95 163.90 208.25 No. 40588 1-axis machine vice Original Vertex made of high-quality cast iron with adjustable guides hardened and ground steel jaws ground guiding surface 1 axis with degree scale rotating by 360 No. 40540 Jaw width Clamping width Jaw height No. 40541 Jaw width Clamping width Jaw height 100 mm 65 mm 36 mm 125 mm 85 mm 38 mm 139.00 177.31 179.00 232.05 for item no. 40540 for item no. 40541 Single prism jaw with horizontal and vertical v-block for clamping round material no. 405401 49.50 65.45 no. 405411 49.50 65.45 1-axis machine vice No. 40585 79.00 103.53 1 axis with degree scale rotating by 360 Jaw width 50 mm Clamping width 50 mm Jaw height 25 mm 2-axes machine vice No. 40599 459.00 577.15 made of hardened steel 2 axes with degree scales rotating by 360 ± 45 swiveling Accuracy 0.005 mm Jaw width 70 mm Clamping width 80 mm Jaw height 30 mm 2-axes machine vice 2 axes with degree scale rotating by 360 90 horizontal-vertical swiveling No. 40580 Jaw width Clamping width Jaw height No. 40581 Jaw width Clamping width Jaw height 50 mm 50 mm 23 mm 75 mm 75 mm 32 mm 97.90 136.85 159.90 195.16 V-block adjustable No. 11350 45.00 77.35 32 x 25 x 75 mm with scale and vernier Swivel range 0-60 and 0-30 used as an underlay in the vice for machining workpieces under different working levels Universal angle block set No. 11340 68.99 89.13 9 pieces 0.5, 1, 2, 3, 4, 5, 10, 15, 30 hardened and ground Work stop tool Original Vertex No. 40810 119.00 177.31 5 axes infi nitely rotatable and slidable rotating by 360 can be used as an inner and outer stop 16 further information at www.wabeco-remscheid.de
Wave-shaped parallels Parallels Parallels No. 11661 29.99 47.60 No. 11659 44.99 83.18 No. 11660 58.99 117.81 8 pairs 2 mm ascending from 9-23 mm, 0.5 mm thick Accuracy 0.01 mm Total length 110 mm 6 pairs 4x10, 4x15, 4x20, 4x25, 4x30, 4x35 mm Accuracy 0.01 mm Total length 120 mm 9 pairs 8.5x14, 8.5x16, 8.5x20, 8.5x24, 8.5x30, 8.5 x 32, 8.5x36, 8.5x40, 8.5x44 mm Accuracy 0.01 mm Total length 150 mm Step clamp sets 10 pieces 2 step clamps 2 fl ange nuts 2 step blocks with stepped teeth 2 T-slot nuts and 2 studs for 10 mm T-slot width M8 Thread for 12 mm T-slot width M10 Thread no. 24412 18.00 21.42 no. 24415 18.00 21.42 Step clamp sets 58 pieces 12 step blocks with stepped teeth 6 step clamps 6 fl ange nuts 6 T-slot nuts 24 studs 4 extension nuts for 10 mm T-slot width M8 Thread for 12 mm T-slot width M10 Thread for 14 mm T-slot width M12 Thread for 16 mm T-slot width M14 Thread no. 24417 41.00 69.02 no. 24413 42.00 70.21 no. 24418 51.00 82.11 no. 24419 74.00 105.91 Clamping angle 90 Cast version with lateral reinforcing ribs both clamping surfaces are ground both clamping surfaces are ground for clamping on the machine table to clamp the workpieces and set-up at an angle to the vertical on marking tables, measuring tables, straightening tables, welding tables etc. to position workpieces vertically No. 13500 39.90 58.31 No. 13501 55.00 82.11 Longitudinal slots 3 x 12 mm Transverse slot 1 x 14 mm Dimensions 115 x 90 x 75 mm Longitudinal slots 4 x 14 mm Transverse slots 4 x 14 mm Dimensions 150 x 130 x 115 mm Coolant hose with 3 nozzles Original Vertex No. 13810 65.00 77.35 with magnetic base Coolant hose 300 mm each Mist coolant system Original Vertex No. 13815 119.90 177.31 with magnetic base Working pressure 2-6 bar Connection for compressed air hose Ø 13 mm Levelling element No. 10268 15.00 19.04 PU: 1 piece Vibration pick-up and absorption element Ø 80 mm, thread M10 or in the WABECO catalog 2017 - we shall be pleased to consult with you personally +49 2191 597-0 17
T-slot covers original Vertex PU: 3 pieces Length per cover rail 400 mm anodised aluminum Swarf defl ector, prevents swarfs from getting into the T-slots with bores for draining off coolant can be cut as necessary for T-slot width 12 mm No. 11259 19.99 42.84 Push type gun No. 11535 19.99 23.68 for grease and oil for conical and ball-head grease nipples with a pointed- and a hollow- /universal mouthpiece for T-slot width 14 mm No. 11260 19.99 42.84 Telescopic magnetic pick-up tool Auto center punch original Vertex Pin punch set No. 13980 4.70 8.33 No. 13295 10.00 16.66 No. 13290 10.00 16.66 telescopes up to approx. 615 mm Magnet Ø approx. 12 mm With spring mechanism for one hand operation Punch force infi nitely variable via knurled screw Length 130 mm Shank Ø 14 mm 8 pieces Ø 1.6-2.4-3.2-4.6-4.8-5.6-6.4-8.0 Total length 100 mm 20 mm pin length Universal holder for drilling machines No. 20140 10.00 11.90 suitable for all drilling machines with Euronorm Ø 43 mm Holder head swiveling or rotating universally applicable e. g. for grinding or polishing work Examples of use Vernier calipers Reading accuracy 0.05 mm with locking screw and depth gauge 100 mm no. 11314 10.50 15.47 150 mm no. 11322 11.50 17.85 Dial vernier caliper No. 11319 19.99 29.75 Measuring range 150 mm Reading accuracy 0.02 mm with locking screw and depth gauge Electronic digital vernier calipers 5-digit LCD display Reading accuracy 0.01 mm with locking screw and depth gauge 100 mm no. 11328 14.00 29.75 150 mm no. 11320 15.00 35.70 200 mm no. 11321 24.00 47.60 Straight edge No. 11311 15.99 35.70 200 mm Cross section 28 x 7 mm with isolation protection Universal angle plate set No. 11347 26.99 34.51 30-45 - 60-90 Hole Ø 8 mm Width 6.35 mm 18 further information at www.wabeco-remscheid.de
Marking vernier caliper No. 13125 22.50 35.58 Measuring range 200 mm Reading accuracy 0.05 mm with guide roller hardened and ground Vernier protractor No. 13105 14.00 14.88 Rail length 150 mm Measuring range 0-180 Reading accuracy 1 Universal vernier protractor No. 11310 49.00 65.33 Rail length 300 mm Measuring range 360 easy read off 4 x 90 Readout 5 min with additional angle 45 and 60 chamfered, reversible and slideable Vernier depth gauge No. 11323 20.00 33.32 Measuring range 200 mm Reading accuracy 0.05 mm Rest 100 mm with locking screw Digital vernier depth gauge No. 11327 27.00 35.58 Measuring range 150 mm 5-digit LCD display Reading accuracy 0.01 mm Rest 100 mm with locking screw Depth micrometer No. 11324 49.90 77.35 Measuring range 100 mm Reading accuracy 0.01 mm 4 replaceable inserts Ø 3 mm length 25-50 - 75 and 100 mm with locking screw and ratchet Micrometer No. 11301 12.90 17.85 Measuring range 0-25 mm Reading accuracy 0.01 mm according to DIN 863 Digital micrometers 5-digit LCD display Reading accuracy 0.001 mm according to DIN 863 0-25 mm no. 11392 50.00 77.35 25-50 mm no. 11393 60.00 89.25 Micrometer set No. 11317 59.90 95.08 4 pieces Measuring ranges 0-25, 25-50, 50-75 and 75-100 mm according to DIN 863 Reading accuracy 0.01 mm Holder for micrometer No. 11304 19.99 23.68 suitable for micrometers from 0 to 100 mm Divider with scriber No. 13101 14.00 20.83 Rail length 150 mm Scriber 150 mm Opening width 190 mm hardened tips clamping screw Bore gauge No. 13121 129.00 177.31 15 pieces Measuring range 20-200 mm Dial gauge 4 replaceable gauging pins - 4 extension rods Reading accuracy 0.01 mm hardened and ground measuring surfaces carbide-tipped measuring surfaces or in the WABECO catalog 2017 - we shall be pleased to consult with you personally +49 2191 597-0 19
Two point inside micrometers Reading accuracy 0.01 mm according to DIN 863 Measuring spindle 0.5 mm upwards with locking screw and ratchet 5-30 mm no. 13115 39.00 53.55 25-50 mm no. 13116 45.00 65.45 Two point inside micrometer set No. 13114 125.00 178.50 3 inside micrometers with measuring range 5-30, 25-50 mm and 50-75 mm Reading accuracy 0.01 mm according to DIN 863 Measuring spindle 0.5 mm upwards with locking screw and ratchet Telescopic gauge set No. 11315 36.00 58.31 6 pieces Measuring range 8-12.7 12.7-19 19-32 32-54 54-90 and 90-150 mm Edge fi nder with centering point No. 11329 12.50 22.61 Clamping shank Ø 10 mm Total length approx. 75 mm Probe Ø 4 mm and conical Alignment accuracy 0.01 mm Edge fi nder No. 11330 10.00 22.61 Clamping shank Ø 10 mm Total length approx. 85 mm Probe Ø 10 mm Alignment accuracy 0.01 mm Edge fi nder set No. 11331 26.00 45.22 Clamping shank Ø 10 and 12 mm Probe Ø 4, 10 and 12 mm and conical Alignment accuracy 0.01 mm V-block pairs PU: 2 pieces hardened V-blocks with clamping bracket all sides ground 44x41x35 mm, clamping Ø up to 30 mm No. 11305 32.00 46.41 70x45x41 mm, clamping Ø up to 42 mm No. 11308 48.00 58.31 Single V-blocks PU: 1 piece hardened V-block with clamping bracket all sides ground 44x41x35 mm, clamping Ø up to 30 mm No. 11306 16.00 22.61 70x45x41 mm, clamping Ø up to 42 mm No. 11309 24.00 28.56 V-block set No. 11307 40.00 49.98 PU: 2 pieces 1 V-block 44 x 41 x 35 mm clamping Ø up to 30 mm 1 V-block 70 x 45 x 41 mm clamping Ø up to 42 mm hardened V-blocks with clamping bracket all sides ground Machine level No. 11353 62.00 95.08 Length 200 mm 0.02 mm/m accuracy with longitudinal and transverse lobes ground seating surface Frame level No. 11354 69.99 102.22 Length 200 mm 0.02 mm/m accuracy 2 prismatic sides - 1 fl at side with longitudinal and transverse lobes ground seating surface 20 further information at www.wabeco-remscheid.de
Center indicator with dial gauge No. 11337 90.00 130.90 Dial Ø 40 mm, 0-3 mm Clamping shank Ø 10 mm Head length 135 mm Reading accuracy 0.01 mm with 3 outside and inside feelers each length: 45, 100 and 150 mm resilient scriber with stop rod for fi xing the head Measurement and test board No. 11395 98.00 213.01 450 x 450 x 75 mm DIN 876/0 without measuring tools Weight 46.5 kg Marking and height gauge Digital marking and height gauge No. 11325 44.00 88.06 No. 11326 114.99 196.35 Measuring height 300 mm 2 locking screws Precise adjustment adjustable carbide tip for marking holes, slots, etc. on different workpieces Measuring height 300 mm 5-digit LCD display Reading accuracy ± 0.01 mm Reset button 2 locking screws Precise adjustment adjustable carbide tip Squares wedge-shaped knife measurement edges 100x70 mm no. 13140 16.90 26.18 150x100 mm no. 13141 22.90 35.70 Square set No. 13143 37.90 59.50 1 Square 100 x 70 mm 1 Square 150 x 100 mm wedge-shaped knife measurement edges Try-square set No. 13130 35.00 46.41 4 pieces 70 x 50, 95 x 60, 120 x 80 and 175 x 100 mm Mountable digital vernier scales for horizontal mounting 0.01 mm reading accuracy reversible metric/inch Zero position Mini-USB interface for position display can be cut to any desired intermediate size Mountable digital vernier scales for vertical mounting 0.01 mm reading accuracy reversible metric/inch Zero position Mini-USB interface for position display can be cut to any desired intermediate size Measuring length 100 mm no. 11360 38.00 46.41 Measuring length 150 mm no. 11361 42.00 51.17 Measuring length 200 mm no. 11362 45.00 58.31 Measuring length 300 mm no. 11363 69.00 82.11 Measuring length 400 mm no. 11364 78.00 105.91 Measuring length 500 mm no. 11365 99.00 141.61 Measuring length 100 mm no. 11370 43.00 51.17 Measuring length 150 mm no. 11371 46.00 54.74 Measuring length 200 mm no. 11372 58.00 66.64 Measuring length 300 mm no. 11373 89.00 105.91 Measuring length 400 mm no. 11374 95.00 130.90 Measuring length 500 mm no. 11375 100.00 177.31 or in the WABECO catalog 2017 - we shall be pleased to consult with you personally +49 2191 597-0 21
Single axis position readout (DRO) with power plug No. 11356 66.00 113.05 3-axes position readout (DRO) with power plug No. 11358 149.00 248.71 5-digit LCD display with light 0.01 mm reading accuracy reversible metric/inch Zero position solid plastic housing with magnetic mount 1 connecting cable for Mini-USB port 5-digit LCD display with light 0.01 mm reading accuracy reversible metric/inch Zero position solid plastic housing with magnetic mount 3 connecting cable for Mini-USB port Digital position readout (DRO) for 3 axes No. 10280 419.00 831.81 Color display 7-digit position indicator Resolution 0.005 mm Parameter input Tool memory for 100 tools with independent coordinate reference points Tool no. display Calculator function (addition, subtraction etc.) switchable from lathes to milling machines ergonomically designed folio keyboard, protected against dust and spray water Optical scales protected against shock and dirt Optical scale measuring length 100 mm no. 10283 209.00 296.31 Optical scale measuring length 170 mm no. 10284 219.00 308.21 Optical scale measuring length 270 mm no. 10285 249.00 343.91 Optical scale measuring length 320 mm no. 10286 259.00 355.81 Optical scale measuring length 520 mm no. 10287 299.00 427.21 Magnetic measuring stand with dial gauge No. 11335 23.50 42.84 mechanical clamping of the magnetic base Holding force 50 kg Magnetic base W50 x D63 x H55 mm adjustable to many positions Location hole Ø 8 mm Measuring column Ø 12 x 160 mm Transverse arm Ø 10 x 150 mm Dial gauge Measuring range 10 mm Scale division 0.01 mm Clamping shank Ø 8 mm h6 Metal casing matt-chromium fi nished Ø 55 mm according to DIN 878 Magnetic measuring stand with central clamping of the measuring column with dial gauge No. 11338 39.90 65.45 central clamping of the measuring column enabling easy and fast fi xing in almost every position mechanical clamping of the magnetic base Holding force 80 kg Magnetic base W50 x D63 x H55 mm Location hole Ø 8 mm Total height 340 mm Dial gauge Measuring range 10 mm Scale division 0.01 mm Clamping shank Ø 8 mm h6 Metal casing matt-chromium fi nished Ø 55 mm according to DIN 878 22 further information at www.wabeco-remscheid.de
Magnetic measuring stand with dial test indicator No. 13161 44.00 67.83 mechanical clamping of the magnetic base Holding force 50 kg Magnetic base W50 x D63 x H55 mm adjustable to many positions Location hole Ø 8 mm Measuring column Ø 12 x 160 mm Transverse arm Ø 10 x 150 mm Dial test indicator Dial Ø 30 mm Measuring span 0.8 mm Reading accuracy 0.01 mm Scale 0-40 - 0 Feeler length 12 mm Measuring insert equipped with carbide ball Ø 2 mm with dovetail guides for clamping shank incl. clamping shank Ø 6 and 8 mm Magnetic measuring stand with dial gauge and dial test indicator No. 13162 55.00 89.25 mechanical clamping of the magnetic base Holding force 50 kg Magnetic base W50 x D63 x H55 mm adjustable to many positions Location hole Ø 8 mm Measuring column Ø 12 x 160 mm Transverse arm Ø 10 x 150 mm Dial gauge see no. 11334 Dial test indicator see no. 13160 Dial test indicator Dial gauge No. 13160 28.00 46.41 No. 11334 13.00 21.42 Dial Ø 30 mm Measuring span 0.8 mm Reading accuracy 0.01 mm Scale 0-40 - 0 Feeler length 12 mm Measuring insert equipped with carbide ball Ø 2 mm with dovetail guides for clamping shank incl. clamping shank Ø 6 and 8 mm Measuring range 10 mm Scale division 0.01 mm Clamping shank Ø 8 mm h6 Metal casing matt-chromium fi nished Ø 55 mm according to DIN 878 Magnetic measuring stand No. 11333 16.99 23.80 mechanical clamping of the magnetic base Holding force 50 kg Magnetic base W50 x D63 x H55 mm adjustable to many positions Location hole Ø 8 mm Measuring column Ø 12 x 160 mm Transverse arm Ø 10 x 150 mm Magnetic measuring stand with central clamping of the measuring column No. 11332 27.50 47.48 central clamping of the measuring column enabling easy and fast fi xing in almost every position mechanical clamping of the magnetic base Holding force 80 kg Magnetic base W50 x D63 x H55 mm Location hole Ø 8 mm Total height 340 mm Quick-change tool post sets 5 pieces very precise locating fi xture rapid tool change the tool blade always returns to exactly the same position after changing the tool post the repeating accuracy is 0.01 mm the height of the tool blade tip can be adjusted quickly by means of an adjusting screw on each tool holder 40 different angular settings 1x quick-change tool post, main body Size Aa (A0) no. 10793 225.00 367.71 1x boring steel holder 3x turning tool holder Size A no. 10794 245.00 462.91 or in the WABECO catalog 2017 - we shall be pleased to consult with you personally +49 2191 597-0 23
Quick-change tool post, main body Size Aa (A0) No. 10780 119.90 189.21 Size A No. 10785 162.00 224.91 Parting tool holder for holding parting blade Size Aa (A0) 4 clamp screws No. 10782 77.00 95.20 Size A 3 clamp screws No. 10787 78.00 97.58 Parting blade No. 10790 28.00 35.11 Total length 100 mm Thickness 2.7 mm - Height 10 mm Boring steel holder for holding cylindrical tools such as boring steels compatible e.g. with following producers: AXA, Klopfer, Multi Suisse Size Aa (A0) for boring tools up to max. 12 mm 4 clamp screws - total length 50 mm No. 10781 39.00 61.88 Size A for boring tools up to max. 20 mm 3 clamp screws - total length 90 mm No. 10786 44.00 76.16 Turning tool holder for holding rectangular tools compatible e.g. with following producers: AXA, Klopfer, Multi Suisse Size Aa (A0) for turning tools up to max. 12 mm 4 clamp screws - total length 50 mm No. 10783 39.00 58.31 Size A for turning tools up to max. 20 mm 3 clamp screws - total length 90 mm No. 10788 44.00 61.88 Parting tool holder with parting blade HSS Parting blade thickness 1.5 mm Length 63 mm Cross section 8x8 mm no. 10837 7.00 14.28 10x10 mm no. 10835 8.00 14.28 Parting tool holder with 2 parting blades Parting blade thickness 1.5 mm Length 63 mm Cross section 8x8 mm no. 10839 9.50 19.04 10x10 mm no. 10834 10.50 19.04 Parting off tool holder with parting inserts No. 10840 99.00 151.13 industrial quality Cross section 10 x 10 mm Replacement blade No. 10836 3.50 5.95 Replacement parting inserts No. 1090650 38.00 47.60 Thickness 2.2 mm PU: 5 pieces Carbide-tipped turning tool set No. 10910 15.90 23.80 6 pieces Cross section 10 x 10 mm with carbide tips P30 Carbide-tipped turning tool sets 10 pieces with carbide tips P30 Cross section 8 x 8 mm no. 10911 21.00 42.84 10 x 10 mm no. 10912 23.00 45.22 12 x 12 mm no. 10913 29.00 52.36 16 x 16 mm no. 10914 41.00 69.02 20 x 20 mm no. 10909 53.00 80.92 24 further information at www.wabeco-remscheid.de
HSS turning tool sets 8 pieces all turning tools have precision-ground cutting edges and fl anks Cross section 4 x 4 mm no. 10915 29.00 41.65 6 x 6 mm no. 10918 31.00 52.36 8 x 8 mm no. 10916 34.00 55.93 10 x 10 mm no. 10917 36.00 67.83 12 x 12 mm no. 10919 41.00 80.92 Turning tool sets for indexable inserts 7 pieces with key each turning tool with indexable insert each indexable insert has 4 cutting edges Cross section 8 x 8 mm no. 10860 98.00 165.41 10 x 10 mm no. 10861 99.00 166.60 Carbide tip indexable inserts No. 10865 35.00 46.41 PU: 5 pieces each indexable insert has 4 cutting edges Plate form CCMT Knurling tool No. 10920 12.00 19.04 Cross section 12 x 12 mm with 2 cross knurling wheels Width 9.5 mm, Ø 19 mm used to profi le spindles, screws, nuts e.g. Knurling holder No. 10921 21.00 34.51 Cross section 12 x 12 mm with 2 cross knurling wheels Width 9.5 mm, Ø 19 mm used to profi le spindles, screws, nuts e.g. 2-fold knurling tool No. 10923 12.00 22.61 Cross section 10 x 10 mm with 2 straight knurling wheels Width 4 mm, Ø 15 mm used to profi le spindles, screws, nuts e.g. Center drill set HSS No. 10846 12.00 17.85 4 center drills HSS DIN 333 with nominal Ø 1.00, 2.00, 2.50 and 5.00 mm 60 countersink angle Live centers MT2 no. 10766 25.50 41.65 MT3 no. 10770 29.00 51.17 MT4 no. 10771 31.50 58.31 Live center set No. 10768 89.00 124.95 8 pieces Morse taper MT2 with interchangeable inserts 3-jaw lathe chucks centrically clamping Turning and drilling jaws Clamping key Fastening screws 4-jaw lathe chucks centrically clamping Turning and drilling jaws Clamping key Fastening screws Ø 80 mm no. 10700 55.00 99.96 Ø 100 mm no. 10711 59.00 109.48 Ø 125 mm no. 10721 79.00 135.66 Ø 160 mm no. 10752 109.00 196.35 Ø 80 mm no. 10728 77.00 157.08 Ø 100 mm no. 10729 87.00 172.55 Ø 125 mm no. 10731 109.00 177.31 Ø 160 mm no. 10753 139.00 272.51 or in the WABECO catalog 2017 - we shall be pleased to consult with you personally +49 2191 597-0 25
3-jaw chucks MT2-M10 centrically clamping turning and drilling jaws clamping key Ø 80 mm no. 10705 95.00 141.61 Ø 100 mm no. 10714 99.00 153.51 Independent chucks heavy version for industrial use with 4 stepped reverse-clamping jaws, which can be adjusted individually and independently of each other Workpiece clamping device for clamping large and irregularly shaped workpieces Ø 80 mm no. 13310 65.00 97.58 Ø 100 mm no. 13314 79.00 105.91 Ø 125 mm no. 13318 89.00 124.95 Ø 160 mm no. 13322 115.00 160.65 Collet chuck with key and collets No. 10778 223.00 355.81 for all lathes with cylindrical main spindle nose according to DIN 6350 cylindrical inside diameter 70 mm 14 collets from Ø 3-16 mm according to DIN 415E OZ Clamping and face plate No. 13300 89.00 148.75 for all lathes with cylindrical main spindle nose according to DIN 6350 cylindrical inside diameter 70 mm Clamping Ø up to 150 mm with 4 T-slots 10 mm wide for receiving irregularly shaped workpieces Tapping attachment No. 11691 99.90 118.88 9 pieces MT2 and fl at tang 4 die holders Ø 16-20 - 25-30 mm 4 tap holders Ø 5-6 - 7-10 mm Tool turret with 6 tool positions No. 10798 199.99 303.45 21 pieces MT2 and tightening thread M10 with 6 cylindrical location holes Ø 16 mm for tailstock Combi shell end mill arbor MT2x16-M10 with key No. 11731 38.00 94.01 with mill retaining screw and feather key for mills with longitudinal and transverse slot Arbor spacer set No. 11650 12.00 38.08 5 pieces width 1-2 - 5-10 - 20 mm suitable for combi shell end mill arbors with location hole Ø 16 mm 26 further information at www.wabeco-remscheid.de
Combi shell end mill arbor MT2x16-M10 with key and arbor spacers No. 11732 49.00 132.09 Combi shell end mill arbor Key for combi shell end mill arbor 5 arbor spacers width 1-2 - 5-10 - 20 mm Combi shell end mill arbor MT2x16-M10 set with key, arbor spacers, shell end mills and slitting saw blade No. 11733 91.00 220.15 Combi shell end mill arbor Key for combi shell end mill arbor 5 arbor spacers width 1-2 - 5-10 - 20 mm Shell end mill Ø 40 - width 40 mm Metal slitting saw blade HSS Ø 63 - width 2 mm Single-angle milling cutters HSS Location hole Ø 16 mm Ø 63 mm with longitudinal slot Milling angle 45 No. 11910 29.00 53.55 Milling angle 60 No. 11911 29.00 53.55 Shell end mills HSS Location hole Ø 16 mm Finishing cutter with fi ne toothing with longitudinal and transverse slot Ø 40 mm width 20 mm no. 11920 21.50 46.41 Ø 35 mm width 35 mm no. 11921 25.50 58.31 Ø 40 mm width 40 mm no. 11922 36.50 65.45 Shell end mill HSS No. 11925 36.00 77.35 Location hole Ø 16 mm Ø 40 mm Width 40 mm Roughing mill with rough toothing with longitudinal and transverse slot Side milling cutters HSS Ø 50 mm, location hole 16 mm cuts on 3 sides No. 11930 width 4 mm 15.00 33.32 No. 11931 width 5 mm 16.00 34.51 No. 11932 width 6 mm 17.00 35.70 No. 11933 width 8 mm 18.00 38.08 No. 11934 width 10 mm 20.00 40.46 Metal slitting saw blades HSS Location hole Ø 16 mm Ø 63 mm with lateral clearance Width 1 mm no. 11951 10.00 27.37 Width 2 mm no. 11952 12.00 28.56 Metal slitting saw blade set HSS No. 11960 39.00 58.91 Holder for metal slitting saw blade location shank Ø 12 mm Location shank Ø 12 mm location hole Ø 16 mm - Ø 63 mm width 1.0-1.5 and 2.0 mm Face mill industrial quality No. 11878 134.00 201.11 with 6 carbide tip indexable inserts each carbide tip indexable inserts has 2 fl utes 6 fl utes face mill Outer Ø 40 mm Location hole Ø 16 mm Replacement indexable insert for face mill PU: 1 piece No. 11879 7.90 12.50 carbide tip indexable inserts with 2 fl utes or in the WABECO catalog 2017 - we shall be pleased to consult with you personally +49 2191 597-0 27
Weldon end mill arbors MT2-M10 for inserting directly into the tool spindle No. 1190780 Ø 6 mm location hole No. 1190781 Ø 8 mm location hole No. 1190782 Ø 10 mm location hole No. 1190783 Ø 12 mm location hole No. 1190784 Ø 16 mm location hole No. 1190785 Ø 20 mm location hole 23.90 each 33.32 Morse taper sleeves MT2-M10 short outreach, ensures improved stiffness for inserting directly into the toolspindle No. 13001 Ø 1 mm No. 13008 Ø 8 mm No. 13002 Ø 2 mm No. 13009 Ø 9 mm No. 13003 Ø 3 mm No. 13010 Ø 10 mm No. 13004 Ø 4 mm No. 13011 Ø 11 mm No. 13005 Ø 5 mm No. 13012 Ø 12 mm No. 13006 Ø 6 mm No. 13013 Ø 13 mm No. 13007 Ø 7 mm 9.00 each 17.85 Morse taper sleeve set MT2-M10 No. 13020 115.00 224.91 13 morse taper sleeves with clamping Ø from 1-13 mm short outreach, ensures improved stiffness for inserting directly into the toolspindle Milling cutter 90 MT2-M10 No. 11800 74.99 106.98 with 3 carbide tip indexable inserts each carbide tip indexable inserts has 2 fl utes 3 fl utes milling cutter Outer Ø 20 mm for inserting directly into the tool spindle Collet chuck MT2-M10 with key No. 11728 58.00 127.33 Clamping range with collets 3-16 mm (collets are not part of the delivery) for mounting the collets item no. 11703 to 11716 Collet set MT2-M10 No. 11734199.90 355.81 16 pieces Collet chuck MT2- M10 clamping range with collets 3-16 mm Key for collet chuck 14 collets from Ø 3 to 16 mm according to DIN 415E OZ Replacement indexable insert PU: 1 piece No. 11879 7.90 12.50 carbide tip indexable inserts with 2 fl utes Collets according to DIN 415E OZ No. 11703 Ø 3 mm No. 11710 Ø 10 mm double slotted No. 11704 Ø 4 mm No. 11711 Ø 11 mm with a clamping range of up to 0.5 mm No. 11705 Ø 5 mm No. 11712 Ø 12 mm below nominal size, i.e. e.g. the collet 8 mm No. 11706 Ø 6 mm No. 11713 Ø 13 mm can clamp up to 7.5 mm No. 11707 Ø 7 mm No. 11714 Ø 14 mm No. 11708 Ø 8 mm No. 11715 Ø 15 mm No. 11709 Ø 9 mm No. 11716 Ø 16 mm 15.00 each 23.21 Slotting mill set solid carbide No. 11826 57.00 77.35 5 pieces 2 fl utes slotting mills Cutter Ø 4, 5, 6, 8, 10 mm with straight shank End mill set solid carbide No. 11869 57.00 77.35 5 pieces 4 fl utes end mills Cutter Ø 4, 5, 6, 8, 10 mm with straight shank 28 further information at www.wabeco-remscheid.de
Slotting mill set Titanium -coated No. 11825 37.90 59.50 11 pieces short with straight shank 2 fl utes slotting mills straight grooved End mill set Titanium -coated No. 11843 35.90 53.55 9 pieces short with straight shank 4 fl utes end mills helically grooved Cutter Ø mm 2 3 4 5 6 8 10 12 14 16 18 Shank Ø mm 6 6 6 6 6 10 10 12 12 16 16 Cutter Ø mm 4 5 6 8 10 12 14 16 18 Shank Ø mm 6 6 6 10 10 12 12 16 16 Mill set Titanium -coated No. 11873 39.90 59.50 12 pieces 6 slotting mills - 2 fl utes 6 end mills - 4 fl utes Cutter Ø mm 3 4 6 8 10 12 Shank Ø mm 6 6 6 10 10 12 Mill set Titanium -coated No. 11870 68.00 113.05 20 pieces 10 slotting mills - 2 fl utes 10 end mills - 4 fl utes Cutter Ø mm 3 4 5 6 8 10 12 14 18 20 Shank Ø mm 6 6 6 6 10 10 12 12 16 16 Slotting mills Titanium -coated short with straight shank 2 fl utes end mills straight grooved Cutter Ø 2 mm shank Ø 6 mm no. 11810 4.50 Cutter Ø 3 mm shank Ø 6 mm no. 11811 4.50 Cutter Ø 4 mm shank Ø 6 mm no. 11812 4.50 Cutter Ø 5 mm shank Ø 6 mm no. 11813 5.00 Cutter Ø 6 mm shank Ø 6 mm no. 11814 5.50 Cutter Ø 8 mm shank Ø 10 mm no. 11815 6.00 Cutter Ø 10 mm shank Ø 10 mm no. 11816 7.00 Cutter Ø 12 mm shank Ø 12 mm no. 11817 8.00 Cutter Ø 14 mm shank Ø 12 mm no. 11818 9.50 Cutter Ø 16 mm shank Ø 16 mm no. 11819 11.50 Cutter Ø 18 mm shank Ø 16 mm no. 11820 13.50 End mills Titanium -coated short with straight shank 4 fl utes end mills helically grooved Cutter Ø 3 mm shank Ø 6 mm no. 11829 5.00 Cutter Ø 4 mm shank Ø 6 mm no. 11830 5.00 Cutter Ø 5 mm shank Ø 6 mm no. 11831 5.50 Cutter Ø 6 mm shank Ø 6 mm no. 11832 6.00 Cutter Ø 8 mm shank Ø 10 mm no. 11833 6.50 Cutter Ø 10 mm shank Ø 10 mm no. 11834 7.50 Cutter Ø 12 mm shank Ø 12 mm no. 11835 9.00 Cutter Ø 14 mm shank Ø 12 mm no. 11836 10.50 Cutter Ø 16 mm shank Ø 16 mm no. 11837 12.50 Cutter Ø 18 mm shank Ø 16 mm no. 11838 14.50 End mills Titanium -coated short with straight shank 4 fl utes end mills roughing and knurling teeth characteristics, relief ground Cutter Ø 10 mm shank Ø 10 mm no. 11850 19.00 Cutter Ø 12 mm shank Ø 12 mm no. 11851 19.00 Cutter Ø 14 mm shank Ø 12 mm no. 11852 20.00 Cutter Ø 16 mm shank Ø 16 mm no. 11853 20.00 Cutter Ø 18 mm shank Ø 16 mm no. 11854 24.00 or in the WABECO catalog 2017 - we shall be pleased to consult with you personally +49 2191 597-0 29
Radius mill set HSS No. 11885 39.90 53.55 5 pieces with straight shank 4 fl utes Slot cutter set HSS No. 11888 98.00 160.65 9 pieces with straight shank cross toothed Cutter Ø mm 4 5 6 8 10 Shank Ø mm 4 5 6 8 10 Radius mm 2 2.5 3 4 5 Ø mm 10.5 10.5 19.5 19.5 19.5 22.5 25.5 28.5 32.5 Cutter width mm 2 3 4 5 6 5 6 8 10 Shank Ø mm 12 12 12 12 12 12 12 12 12 Angle milling cutter set 60 HSS No. 11887 84.00 113.05 5 pieces with straight shank Ø mm 13 16 20 25 32 Shank Ø mm 12 12 12 12 16 Milling angle 60 60 60 60 60 Corner rounding end mill set HSS No. 11889 64.00 130.90 8 pieces with straight shank straight toothed Radius mm 1 2 3 4 5 6 8 10 Shank Ø mm 10 10 12 12 12 16 16 16 Carbide milling cutter set No. 11890 59.50 77.35 14 pieces with straight shank Storage box for mills No. 13600 18.99 23.68 Plastic box for 62 mills Ø mm 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 Shank Ø mm 3 3 3 3 3 3 3 3 3 3 3 3 3 3 Shank Ø mm 6 8 10 12 16 20 25 32 42 Folder 15 12 5 5 8 7 6 2 2 Countersink bit set 90 HSS No. 11989 24.00 51.05 6 pieces with 3 fl utes with straight shank Countersink bit and deburrer set 90 HSS No. 11990 24.00 51.05 5 pieces with cross hole with straight shank Sinker Ø mm 6.3 8.3 10.4 12.4 16.5 20.5 Shank Ø mm 5 6 6 8 10 10 Sinker Ø mm 6 10 14 21 28 Shank Ø mm 6 6 8 10 12 for bores mm 1-4 2-5 5-10 10-15 15-20 Counterbore set HSS No. 11991 49.00 76.04 7-pieces with straight shank solid dowel pin for screws mm M3 M4 M5 M6 M8 M10 M12 Shank Ø mm 6 6 6 8 10 12 12 Dowel pin Ø mm 3.2 4.2 5.2 6.2 8.2 10.2 12.2 30 further information at www.wabeco-remscheid.de
Key-type drill chuck with drill chuck arbor MT2 No. 11621 20.00 47.60 Key-type drill chuck clamping width 1.5-13 mm inner taper B16 Drill chuck arbor MT2 with fl at tang outer taper B16 Quick-action drill chuck B16 Inner taper B16 heavy version for industrial use Clamping width 1-13 mm no. 11623 23.00 58.31 Clamping width 3-16 mm no. 11624 23.00 58.31 Quick-action drill chuck with drill chuck arbor MT2 Quick-action drill chuck inner taper B16 Drill chuck arbor MT2 with fl at tang outer taper B16 Clamping width 1-13 mm no. 11622 26.00 71.40 Clamping width 3-16 mm no. 11626 29.00 71.40 Quick-action drill chuck with drill chuck arbor MT2-M10 Quick-action drill chuck inner taper B16 Drill chuck arbor MT2 and tightening thread M10 outer taper B16 Clamping width 1-13 mm no. 11630 49.00 107.10 Clamping width 3-16 mm no. 11631 52.00 107.10 Drill sleeve from MT3 to MT2 No. 11635 7.99 10.12 morse taper MT3 outside morse taper MT2 inside with fl at tang Boring head MT2-M10 with boring bar set No. 11663 99.90 178.50 Head Ø 50 mm Feed accuracy 0.02 mm Location hole 12 mm Boring head MT2-M10 with boring bar set No. 11672 120.00 207.06 Head Ø 75 mm Feed accuracy 0.02 mm Location hole 20 mm 1 drill sleeve from shank Ø 20 to 12 mm Boring head ISO30-M12 with boring bar set No. 11673 120.00 207.06 Head Ø 75 mm Feed accuracy 0.02 mm Location hole 20 mm 1 drill sleeve from shank Ø 20 to 12 mm Boring bar sets carbide-tipped 9 pieces Shank Ø 10 mm no. 11670 21.90 26.18 Shank Ø 12 mm no. 11671 24.90 30.94 Fly cutter set with HSS Blade No. 11805 44.99 59.38 3 pieces Shank Ø 10 mm Head Ø 14, 18 and 22 mm or in the WABECO catalog 2017 - we shall be pleased to consult with you personally +49 2191 597-0 31
Circle cutter with bevelled blade No. 11686 75.99 101.15 MT2 and fl at tang Grooving capacity 30-300 mm infi nitely variable adjustment of the diameter with drawing cut, i.e. the cutting motion is performed sloped to the tool for obtaining tear-free edges Material strength steel up to approx. 5 mm Drill hole 5 mm Step drill set Titanium -coated No. 11880 79.99 118.88 5 pieces with straight shank 2 fl utes with center drill tip for drilling in thin sheet steel without pre-boring Drills and removes burr at the same time with the next drill step Steps Ø mm 4-12 4-20 5-28 4-30 4-39 Shank Ø mm 6 8 10 10 12 Step drill Titanium -coated with straight shank 2 fl utes with center drill tip Step Ø 4-12 mm Shank Ø 6 mm No. 11881 9.00 21.42 Step Ø 5-28 mm Shank Ø 10 mm No. 11882 14.50 28.56 Threading attachment original Vertex No. 11680 129.00 184.45 for thread cutting from M2 to M8 MT2 and fl at tang with key-type drill chuck automatic forward and reverse motion Threading attachments No. 11683 299.00 474.81 for thread cutting from M3 to M12 MT2 and fl at tang Torque of sliding clutch is 4-fold adjustable with adjustable safety sliding clutch - protects the tap from breakage automatic forward and reverse motion with 2 rubber fl ex grips Tap chuck original Vertex No. 11690 59.00 90.44 for thread cutting from M4 to M12 Inner taper B16 Head Ø 42 mm Total length 72 mm for inside thread cutting on machine tools with right- and left-hand operation the tap is centered by the clamping jaws Tap chuck original Vertex with drill chuck arbor MT2-M10 and outer taper B16 No. 11692 79.00 141.61 32 further information at www.wabeco-remscheid.de
Tap and die set HSS No. 35430 39.99 59.38 30 pieces 9 round dies M1 - M1.1 - M1.2 - M1.4 - M1.6 - M1.8 - M2 - M2.2 - M2.5 18 taps M1-M2.5 (2 pieces each) 1 die stock 2 holders for clamping the hand taps Taps HSS high cutting performance Tap with polished fl ank angle of 60 HSS - DIN 352 Tolerance 6H for metric right-hand threads for through bores M1 no. 30090 4.99 6.55 M1.5 no. 30091 4.99 6.55 M2 no. 30092 4.99 6.55 M2.5 no. 30093 4.99 6.55 Tap and die set HSS No. 35411 59.90 80.92 31 pieces DIN model Round dies HSS M3-4-5-6-8-10-12 Hand taps HSS M3-4-5-6-8-10-12 1 die stock Ø 25 mm 1 adjustable tap wrench size 1½ 1 screwdriver Tap and die set HSS No. 35501 79.90 117.81 44 pieces DIN model Round dies HSS M3-4-5-6-8-10-12 Hand taps HSS M3-4-5-6-8-10-12 Die stocks 20x5-20x7-25x9-30x11-38x14 mm Adjustable tap wrenches sizes 1 and 2 Core hole drills HSS Ø 2.5-3.3-4.2-5.0-6.8-8.5-10.2 mm Screw pitch gauge 24 blades 1 screwdriver Tap wrench with ratchet 2-jaw clamping chuck for right- and left-hand turn and for rigid use All-steel construction - fully chromed with adjustable t-handle for taps M3 - M10 Square clamping range 2.6-5.5 mm - length 85 mm No. 32702 8.00 9.52 for taps M5 - M12 Square clamping range 4.9-7.0 mm - length 110 mm No. 32707 11.00 11.90 Tap wrench with ratchet 2-jaw clamping chuck for right- and left-hand turn and for rigid use All-steel construction - fully chromed with adjustable t-handle for taps M3 - M10 Square clamping range 2.6-5.5 mm - length 252 mm No. 32622 11.00 14.28 for taps M5 - M12 Square clamping range 4.9-7.0 mm - length 315 mm No. 32626 12.00 17.85 Hand reamer set adjustable HSS with straight shank and square right-hand cutting for reaming bores Hand reamer set 11 pieces No. 13240 129.00 178.38 Individual hand reamers Hand reamers up to a total length of 200 mm are also available individually, item no. 13241 to 13247 Total length Adjustable range Ø Individual hand reamers 138 mm 11.90-13.49 mm no. 13241 19.50 27.37 145 mm 13.49-15.00 mm no. 13242 20.00 27.37 163 mm 15.00-16.66 mm no. 13243 20.00 27.37 170 mm 16.66-18.25 mm no. 13244 22.50 28.56 175 mm 18.25-19.84 mm no. 13245 23.50 29.75 185 mm 19.84-21.43 mm no. 13246 24.50 29.75 200 mm 21.43-23.81 mm no. 13247 25.50 30.94 225 mm 23.81-27.00 mm 250 mm 27.00-30.00 mm 275 mm 30.00-34.10 mm 300 mm 34.10-38.00 mm or in the WABECO catalog 2017 - we shall be pleased to consult with you personally +49 2191 597-0 33
Dividing attachment Ø 100 mm No. 11500 78.00 172.55 vertical/horizontal Table Ø 100 mm True running accuracy 0.08 Height 55 mm 4 T-slots - width of T-slots 8 mm Indexing disks and tailstock are not available Dividing attachment Ø 100 mm with lathe chuck and fl ange Lathe chuck Ø 80 mm centrically clamping with turning and drilling jaws Mounting fl ange for mounting the lathe chuck on dividing attachment 3-jaw lathe chuck no. 11525 168.00 320.11 4-jaw lathe chuck no. 11513 190.00 355.81 Dividing attachment t Ø 110 mm No. 11559 148.00 213.01 vertical/horizontal Table Ø 110 mm True running accuracy 0.04 Height 72 mm 3 T-slots - width of T-slots 11 mm Dividing attachment Ø 110 mm with lathe chuck and fl ange Lathe chuck Ø 80 mm centrically clamping with turning and drilling jaws Mounting fl ange for mounting the lathe chuck on dividing attachment 3-jaw lathe chuck no. 11557 255.00 374.85 4-jaw lathe chuck no. 11558 277.00 428.40 Dividing attachment Ø 110 mm with indexing disks No. 11556 215.00 301.07 Dividing attachment Ø 110 mm with indexing disks and tailstock Description dividing attachment see no. 11559 No. 11555 264.00 397.46 Description indexing disks see no. 11514 Description dividing attachment see item no. 11559 Description indexing disks see item no. 11514 Description tailstock see item no. 11565 Vertex dividing attachment Ø 110 mm No. 11501 215.00 332.01 vertical/horizontal Table Ø 110 mm True running accuracy 0.02 Height 72 mm 3 T-slots - width of T-slots 11 mm Vertex dividing attachment Ø 110 mm with lathe chuck and fl ange Lathe chuck Ø 80 mm centrically clamping with turning and drilling jaws Mounting fl ange for mounting the lathe chuck on dividing attachment 3-jaw lathe chuck no. 11516 323.00 493.85 4-jaw lathe chuck no. 11506 345.00 547.40 Dividing attachment Ø 80 mm with 4-jaw lathe chuck Ø 70 mm No. 11590 159.90 224.91 Dividing attachment table Ø 80 mm true running accuracy 0.08 mm 4 T-slots - width of T-slots 6 mm Height 45 mm 4-jaw lathe chuck Ø 70 mm centrically clamping with turning and drilling jaws Indexing disks for dividing attachments No. 11514 72.00 94.01 for dividing attachments with table Ø 110 and 150 mm for degree and indirect indexing 3 indexing disks and indexing crank Outer Ø 100 mm Number of bores indexing disk A: 15, 16, 17, 18, 19, 20 indexing disk B: 21, 23, 27, 29, 31, 33 indexing disk C: 37, 39, 41, 43, 47, 49 34 further information at www.wabeco-remscheid.de
Dividing attachment Ø 150 mm No. 11560 185.00 260.61 vertical/horizontal Table Ø 150 mm True running accuracy 0.04 Height 80 mm 4 T-slots - width of T-slots 11 mm Vertex dividing attachment Ø 150 mm No. 11510 247.00 332.01 vertical/horizontal Table Ø 150 mm True running accuracy 0.02 Height 80 mm 3 T-slots - width of T-slots 11 mm Dividing attachment Ø 150 mm with indexing disks No. 11566 245.00 348.67 Vertex dividing attachment Ø 150 mm with indexing disks No. 11518 315.00 416.50 Dividing attachment Ø 150 mm with lathe chuck and mounting fl ange Description dividing attachment see no. 11560 Lathe chuck Ø 100 or 125 mm centrically clamping with turning and drilling jaws Mounting fl ange for mounting the lathe chuck on dividing attachment 3-jaw lathe chuck Ø 100 mm no. 11580 276.00 428.40 3-jaw lathe chuck Ø 125 mm no. 11581 296.00 452.20 4-jaw lathe chuck Ø 100 mm no. 11582 304.00 487.90 4-jaw lathe chuck Ø 125 mm no. 11583 326.00 492.66 Vertex dividing attachment Ø 150 mm with lathe chuck and mounting fl ange Description dividing attachment see no. 11510 Lathe chuck Ø 100 or 125 mm centrically clamping with turning and drilling jaws Mounting fl ange for mounting the lathe chuck on dividing attachment 3-jaw lathe chuck Ø 100 mm no. 11519 357.00 505.75 3-jaw lathe chuck Ø 125 mm no. 11507 377.00 529.55 4-jaw lathe chuck Ø 100 mm no. 11508 385.00 565.25 4-jaw lathe chuck Ø 125 mm no. 11509 407.00 570.01 Vertex dividing attachment Ø 150 mm with indexing disks, lathe chuck and mounting fl ange Description dividing attachment see no. 11510 Description indexing disks see no. 11514 Lathe chuck Ø 100 or 125 mm centrically clamping with turning and drilling jaws Mounting fl ange for mounting the lathe chuck on dividing attachment 3-jaw lathe chuck Ø 100 mm no. 11520 429.00 583.10 3-jaw lathe chuck Ø 125 mm no. 11523 449.00 606.90 4-jaw lathe chuck Ø 100 mm no. 11522 457.00 642.60 4-jaw lathe chuck Ø 125 mm no. 11524 479.00 647.36 or in the WABECO catalog 2017 - we shall be pleased to consult with you personally +49 2191 597-0 35
Exhibition dates 2017 / 2018 Faszination Modellbau Friedrichshafen from 03.11.2017-05.11.2017 Heim und Handwerk München from 29.11.2017-03.12.2017 IHM München from 07.03.2018-13.03.2018 Intermodellbau Dortmund from 19.04.2018-22.04.2018 Please also order our new WABECO main catalog for free! ZUKUNFT SCHON HEUTE PRÄZISIONS Dreh- Fräs- und Bohrmaschinen drehen fräsen bohren HAUPTKATALOG 2017 All price indications include the currently valid VAT. For foreign customers from the EU member states with valid VAT ID no. as well as from European non -member countries the VAT does not apply. A surchage of 15.00 must be applied for deliveries to the German islands. Shipments to destinations outside of Germany will be delivered to the customer s door and the actual shipping costs billed to the customer. For deliveries outside of the EU, the applicable customs clearance costs will be billed additionally. Applicable import duties and taxes will be the customer s responsibility. All offers are without engagement. Our general terms and conditions apply (GTC), available at www.wabeco-rs.de or in the WABECO main catalog. wabeco-rs.de Walter Blombach GmbH Am Blaffertsberg 13 42899 Remscheid Germany Phone +49 2191 597-0 Fax +49 2191 597-42 info@wabeco-remscheid.de