DELUXE POWER TOWER Model PT 675-E CAUTION: WARNING: Do not use this product without a physician s approval. Do not let children use this product unsupervised. Read all instructions carefully before using. Tighten all bolts before using equipment. Leave adequate space to exercise Questions/ Comments PLEASE DO NOT CONTACT THE STORE Elite Fitness is committed to providing the very best of quality and customer satisfaction for all of the products we distribute. If for any reason, you are dissatisfied with the product you have purchased or need assistance in any way, please do not hesitate to contact our knowledgeable support staff at: 623-888-6379 Mon.-Fri 9:00 am 5:00 pm Mountain Time Owner s Manual CAUTION: Maximum Weight Limit is 250 lbs. Photo may differ from actual product 1 Version:1202
BEFORE BEGINNING ASSEMBLY Take a few moments to familiarize yourself with the specific parts and hardware included with your product. Make sure all the parts and hardware are included in the carton and examine them for any damage that may have occurred in transport. Some parts may be pre-assembled and pre-installed. CAUTION WARNING: Before starting any exercise program, consult your physician. Read all instructions very carefully before using equipment Tighten all bolts securely before using equipment Product Warranty Limited Liability Elite Fitness warrants that this product will be free from defects in materials and workmanship for a period of 90 days from date of purchase. This warranty applies only to the original purchaser when purchase of the product is from an authorized retailer and is for personal or household use, but not when the sale is for commercial use. This warranty is not transferable. EXCEPT FOR THE LIMITED EXPRESS WARRANTY STATED HEREIN, Elite Fitness DISCLAIMS ALL OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. Elite Fitness, will not be liable for any loss or damage, including incidental or consequential damages of any kind, whether based upon warranty, contract or negligence and arising in connection with the sale, use or repair of the product. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. In the event of failure of this product to conform to this warranty during the warranty period, please call Elite Fitness Customer Service Number at 623-888-6379 for assistance in the repair or replacement of the product or any covered part. Elite Fitness will repair or replace, at its own option, the product or any covered part, except that this warranty does not cover damage caused by accident ( including transit), or repairs or attempted repairs by any person not authorized by Elite Fitness, or by vandalism, misuse, abuse, or alteration. The Warranty Period is based on the purchase date of the product validated by the Authorized Retailers Register Receipt, or valid copy of transaction statement. If you require service under this warranty, please call Customer Service at 623-888-6379 or visit our web site at: www.extremeproductsgroup.com PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE 2
Parts List Part No. Description Qty. Part No. Description Qty. 1L Left Base Frame 1 20 50mm Upright Post End Cap 2 1R Right Base Frame 1 21 M10*62mm Carriage Bolt 4 2 Stabilizer 1 22 M8*60 Carriage Bolt 4 3 Diagonal Support (L/R) 2 23 4 Lower Upright Post (L/R) 2 24 5 Upper Upright Post (L/R) 2 25 6 Left Dip Support 1 26 M10x68 Hexagon Pan Head Screw 4 M8x65 Hexagon Pan Head Screw 16 M8x40 Hexagon Pan Head Screw 5 M6x40 Hexagon Pan Head Screw 2 7 Right Dip Support 1 27 30x60mm Square End Cap 1 8 Vertical Handle 2 28 20x10.5x1.5mm Arc Washer 12 9 Chin-up Bar 1 29 20x8.5x1.5 mm Arc Washer 26 10 Cross Bar 1 30 16x8.5x1.5mm Washer 3 11 Backrest Pad 1 31 13x6.5x1mm Washer 2 12 Arm Pad 2 32 M10 Lock Nut 8 13 14 50mm Base Frame Adjustment End Cap 2 33 M8 Lock Nut 16 50mm Base Frame Round End Cap 2 34 M6 Lock Nut 2 15 6 Grip 6 35 ø26*ø8.5*1.5 Arc Washer 8 16 4 2/5 Grip 2 36 6# Hexagonal Socket Wrench 1 17 5 1/5 Foam 2 37 13#17# Convex Hexagonal Wrench 1 18 25mm Round Cap 10 19 50mm Sleeve 2 3
Exploded View 4
ASSEMBLY INSTRUCTIONS Step 1 Connect the Left and Right Base Frame (#1L & #1 R) with the Mid- Stabilizer (#2), Secure each end with two M8 Hexagon Pan Head Screws (#24), four Arc Washers (#35) and two M8 Lock Nuts (#33). NOTE: Tighten the Nuts and Bolts at this time. Right Angle Left Angle Right Angle Left Angle Step 2 Attach the Left Lower Upright Post (#4) onto the Left Base Frame (#1L), secure it with two M10 Carriage Bolts(#21), two Arc Washers (#28) and two M10 Lock Nuts (#32). NOTE: Do Not tighten the nuts and bolts yet. Attach the Left Diagonal Support (#3) to the Left Base Frame (#1L) and the Left Lower Upright Post (#4), secure it to the Left Base Frame with two M8 Carriage Bolts(#22), two Arc Washers (#29) and two M8 Lock Nuts(#33). Secure it to the Left Lower Upright Post(#4) with two M8 Hexagon Pan Head Screws(#24), four Arc Washers (#29) and two M8 Lock Nuts(#33). Repeat to install the Right side. NOTE: Do Not Tighten all the Nuts and Bolts at this time. 5
ASSEMBLY INSTRUCTIONS Step 3 Attach two Upper Upright Posts (#5) to the two Lower Upright Posts (#4). Connect the two Upper Upright Posts(#5) with the Cross Brace (#10) with four M8 Hexagon Pan Head Screws (#24), eight Arc Washers(#29) and four M8 Lock Nuts (#33). NOTE: Do Not Tighten all the nuts and bolts at this time. Right Angle Left Angle 6
ASSEMBLY INSTRUCTIONS Step 4 Attach the Right Dip Support (#7) to the Upper and Lower Upright Post (#4,#5), align the holes and secure them with two M10 Hexagon Pan Head Screws (#23), four Arc Washers(#28) and two M10 Lock Nuts (#32). Repeat the same procedure to install the Left Dip Support (#6). Attach the two Arm Pads (#12) onto the Left and Right Dip Supports (#6,#7), secure each Arm Pad with two Arc Washers(#29), two M8x65 Hexagon Pan Head Screws (#24). NOTE: Do Not Tighten all the nuts and bolts at this time. 7
ASSEMBLY INSTRUCTIONS Step5 Attach the Backrest Pad(#11) to the Cross Brace (#10). Secure it with three Washers(#30) and three M8 Hexagon Pan Head Screws (#25). Attach the Chin-up Bar (#9) to the top opening on the two Upper Upright Posts(#5), secure the Chin-up Bar to each opening with one Arc Washer(#29) and one M8x40 Hexagon Pan Head (#25) Cover each opening with an Upper Upright Post End Cap (#20). NOTE: Securely tighten all Nuts and Bolts previously installed. 8
Final Assembly The End Caps can rotate to prevent wobbling. If necessary adjust the floors caps height in order to stabilize the unit on the floor. 250 lbs Weight Capacity CAUTION: MAKE SURE ALL NUTS, BOLTS & SCREWS ARE COMPLETELY TIGHTENED BEFORE USE 9
PRECAUTIONS WARNING: 250 LB WEIGHT CAPACITY- To reduce the risk of serious injury, read all important precautions instructions and warnings in this manual before using this product. Elite Fitness, or Extreme Products Group assumes no responsibility for personal injury or property damage sustained by or through the use of this Power Tower. DO NOT USE ANY EXERCISE PRODUCTS WITHOUT A PHYSICIAN S APPROVAL. DO NOT LET CHILDREN USE THIS PRODUCT WITHOUT PROPER ADULT SUPERVISION KEEP YOUR FINGERS, BODY PARTS, CHILDREN AND PETS AWAY FROM MOVING PARTS WARM UP BEFORE EACH WORKOUT AND COOL DOWN AFTER EACH WORKOUT INSURE THAT ALL NUTS, BOLTS, AND SCREWS ARE COMPLETELY TIGHTENED BEFORE USING THIS PRODUCT. INSPECT THIS PRODUCT FOR TEARS AND BROKEN WELDS AND MAKE SURE TO DO ROUTINE MAINTENANCE AND TIGHTENING OF ALL PARTS BEFORE EACH WORKOUT. IF ANY PARTS APPEAR WORN, OR BROKEN, OR IF THIS PRODUCT IS NOT WORKING PROPERLY, DO NOT USE. THIS PRODUCT IS FOR CONSUMER USE ONLY AND IS NOT MEANT FOR COMMERCIAL USE. KEEP PRODUCT INDOORS AWAY FROM MOISTURE AND DUST. PLACE THE POWER TOWER ON LEVEL SURFACE WITH A MAT BENEATH IT TO PROTECT THE FLOOR OR CARPET. USE SLOW MOVEMENTS AND DO NOT BOUNCE UP AND DOWN ON THIS UNIT FOR USE BY ONE PERSON AT ONE TIME HAVING A PARTNER PRESENT DURING WORKOUTS IS RECOMMENDED TO AVOID INJURY, AND ADDITIONAL SAFETY. 10
ELITE FITNESS Distributed by: Extreme Products Group 6635 W. Happy Valley Road Suite A-104, # 213 Glendale, AZ 85310 Phone: 623-888-6379 Fax: 623-434-9100 Service@extremeproductsgroup.com For all parts requests, please visit our website at: www.extremeproductsgroup.com 11