PX-421 Crystal Oscillator

Similar documents
Performance Specifications. Parameter Min Typ Max Units Condition. ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm

PX-422 Hybrid TTL Clock Oscillator

VX-500 Voltage Controlled Crystal Oscillator

TX-707 Low g-sensitivity Temperature Compensated Crystal Oscillator

EX-421 Evacuated Miniature Crystal Oscillator

Performance Specifications

TX-500 Temperature Compensated Crystal Oscillator

TX-700 Temperature Compensated Crystal Oscillator

MX-600 Microprocessor Controlled Crystal Oscillator High Precision

MX-503 Microprocessor Controlled Crystal Oscillator High Precision

Performance Specifications

VX-706 Voltage Controlled Crystal Oscillator

VX-505 Voltage Controlled Crystal Oscillator Extended Temperature

TX-705 Temperature Compensated Crystal Oscillator

Performance Specifications

PX-990 Crystal Oscillator Ultra Low Noise and G-Sensitivity

TX-801 Temperature Compensated Crystal Oscillator

VX-701 Voltage Controlled Crystal Oscillator

OX-171 Oven Controlled Crystal Oscillator

PS-701 SAW Oscillator

VX-503 Voltage Controlled Crystal Oscillator

OX-200 Oven Controlled Crystal Oscillator

VS-504 Dual Frequency VCSO High Frequency

VX-990 Voltage Controlled Crystal Oscillator Ultra Low Noise and G-Sensitivity

VS-507 Voltage Controlled SAW Oscillator

PX-702 PX-570 PX-420

PX-570 High Temperature Crystal Oscillator

HT RTCXO High Temperature Low Power Real Time Clock Crystal Oscillators

OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator

VT-800 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC4

OX-221 Oven Controlled Crystal Oscillator

Performance Specifications. Frequency Stabilities Supply Voltage (Vs) ma ma. RF Output

MD-403 I2C InterfaceOven Controlled Crystal Oscillator

VC-801 CMOS Crystal Oscillator Previous Vectron Model VCC4

VT-701 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC2

VT-860 Temperature Compensated Crystal Oscillator

VT-501 Temperature Compensated Crystal Oscillator Previous Vectron Model VTD3

VC-708 VC-708. LVPECL, LVDS Crystal Oscillator Data Sheet Ultra Low Phase Noise. Description

VVC1 VVC2 Voltage Controlled Crystal Oscillator

VX-805 Voltage Controlled Crystal Oscillator

VC-820 CMOS Crystal Oscillator

VTC4 series Voltage Controlled Temperature Compensated Crystal Oscillator

VTC2 Series Voltage Controlled Temperature Compensated Crystal Oscillator

VC-827 Differential (LVPECL, LVDS) Crystal Oscillator

VC-711 Differential (LVPECL, LVDS) Crystal Oscillator

VV-701 Voltage Controlled Crystal Oscillator Previous Vectron Model VVC1/VVC2

Typical Applications Base Stations Test Equipment Synthesizers. Frequency stabilities 1 [Standard]

VCC6-L/V 2.5 or 3.3 volt LVDS Oscillator

VCC M CMOS Crystal Oscillator

VS-800 Ultra-Low Jitter High Frequency VCSO

C MHz 52 MHz

Description. Block Diagram. Complementary Output. Output. Crystal. Oscillator. E/D or NC

VX-705 Voltage Controlled Crystal Oscillator

C

VS-708 Single Frequency VCSO

OX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator

VX-703 Data Sheet VX-703. Voltage Controlled Crystal Oscillator Previous Vectron Model V-Type. Description. Features. Applications.

MHz. Performance Specifications

Performance Specifications. Frequency Stabilities 1 ( MHz) -20 to +70 C -40 to +85 C -40 to +95 C Residual error compare to fit curve

Performance Specifications. Frequency Stabilities 1 ( 10 & 20 MHz)

HT-MM900A Military Temperature Oscillator

MX-503 High Precision Microprocessor Controlled Crystal Oscillator

VCC4 series 1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator

VSS4 series 3.3 Volt Spread Spectrum CMOS Oscillator

Solder Dip Options T = Standard S = Sn60Pb40 G=SAC305. Package 86 =Leaded 80 = Formed Leads 85=SMT

OX-400 / OX 401 Oven Controlled Crystal Oscillator

Logic & Supply Voltage: L = LVHCMOS +3.3V at 15pF N=LVHCMOS +2.5V at 15pF R = LVHCMOS +1.8V at 15pF

Description. Block Diagram LD (10) VMON (5) Phase Detector & LD (9) FIN 4 CFOUT 1 GND (3, 7, 11, 12) Figure 1. Functional block diagram

VVC4 Voltage Controlled Crystal Oscillator

Typical Applications Satellite and Deep Space Radiation Tolerance Required Severe Environmental Conditions. 10 MHz 40 MHz 10, 20 MHz

VS-751 VS-751. Dual Frequency VCSO. Description. Features. Applications. Block Diagram. Vcc COutput Output SAW 1 SAW 2. Vc FS Gnd

QTCT350 SERIES 3.2 x 5mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 5.0Vdc MHz to 52.

Series T7250-T7258, T9250-T9258, T7001-T7013, T9301-T9313 Extended Temperature/COTS XO, 3.3V

Description. Block Diagram. Complementary Output. Output. Crystal. Oscillator E/D

MD-173 High Stability Coefficient Oscillator I C interface Oven Controlled Crystal Oscillator

VCC6-Q/R Series 2.5 and 3.3 volt LVPECL Crystal Oscillator

VCA1 series 3.3, 5.0 volt CMOS Oscillator

VS-500A Voltage Controlled Saw Oscillator

OX-304 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator

Description. Block Diagrams. Figure 1b. Crystal-Based Multiplier w/saw

QTCT570 SERIES 5 x 7mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to MHz Description

J-Type Voltage Controlled Crystal Oscillator

Other Options Available For An Additional Charge Hot Solder Dip Sn60/Pb40 per MIL-PRF Specifications subject to change without prior notice.

C5310. Tight Stability. 1 MHz 700 MHz

MX-041 Oven Controlled Crystal Oscillator

MD-261 MD-261. Features. Applications. Block Diagram. GNSS (GPS and GLONASS) Disciplined Oscillator Module

QTCH350LD92-32K768Hz Q T CH 350 L D kHz Drilling, data logging tools Oil service industry High temperature applications

VT-841 VT-841. Temperature Compensated Crystal Oscillator. Description. Applications. Features. Block Diagram. Output V DD.

MV-9300A 1-80 MHz High Performance VCXO

CMOS, Ultra-low Jitter Voltage Controlled Crystal Oscillators (VCXOs)

VS-701 High Shock Discrete Voltage Controlled SAW Oscillator

ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION VALUE UNIT

Solder Dip Options T = Standard S = Sn60Pb40 G=SAC305. Package 86 =Leaded 80 = Formed Leads 85=SMT. VCXO model

High Temperature Electronics

CXOQ CXOQ 1.8V CXOQ 2.5V CXOQ 3.0V CXOQ 3.3V

PARAMETER SYMBOL CONDITIONS VALUE UNIT

VT-840 VT-840. Temperature Compensated Crystal Oscillator, Voltage Controlled Temperature Compensated Crystal Oscillator.

VCC4 series 1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator

Q-TECH CORPORATION khz QT381 AND QT386 SERIES ULTRA-LOW CURRENT, HIGH-TEMPERATURE REAL TIME CLOCK OSCILLATORS 2.5Vdc and 3.3Vdc - 32.

QTCT220 SERIES 2.0 x 2.5mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to 52.

Transcription:

PX-421 Crystal Oscillator PX-421 PX-421 PX-421 PX-421 Features Frequency: 10 KHz to 125 MHz 4 Pin 1/2 DIP Package with Through Hole and SMD lead optio Fully RoHS Compliant * No pure tin is used in this product Previous Model: CO-449, MC720, MC721, 7140, 4140, ACA1 Made in USA Applicatio Low voltage clock applicatio Military Portable Radios Avionics and Itrumentation Test and Measurement Equipment Medical Equipment Navigation * ( Except parts with Sn/Pb Solder Coated Option ) Frequency Stabilities Parameter Min Typ Max Units Condition vs. operating temperature range (referenced to C) Initial tolerance Performance Specificatio -15-15 +15 +15 * ( Except parts with Sn-Pb Solder Coated 0 +70 C Option ) -40 +85 C -55 +85 C -55 +105 C -55 +125 C @ C @ C @ C @ C 1 of 8

Overall tolerance (Referenced to C) Performance Specificatio Frequency Stabilities Parameter Min Typ Max Units Condition (includes operating temperature and initial accuracy) vs. supply voltage change vs. load change vs. aging / 1st year vs. aging / year (following years) -20-65 -65-65 -80-2 -1-3 -1 +20 +65 +65 +65 +80 +2 +1 +3 +1 Supply Voltage (Vs) Supply voltage 4.75 5.0 5.25 Supply voltage 3.135 3.3 3.465 Supply voltage 2.375 2.5 2.625 Supply voltage 1.71 1.8 1.89 Current coumption (+5 ) Current coumption (+3.3 or +2.5 ) Current coumption (+1.8 ) Signal Load Signal Level (Vol) Signal Level (Voh) Rise and fall times for ACMOS (measured 10% to 90%) Duty cycle 4.5 3.0 2.25 1.62 15 20 40 1.5 4 8 12 20 30 1.0 2 3 4 10 15 RF Output HCMOS / ACMOS 0.5 0.3 0.25 0.2 10 6 3 0 +70 C -40 +85 C -55 +85 C -55 +105 C -55 +125 C VS ± 5% Load ± 5% after 30 days of operation 45 55 % @ 50% < 15 MHz Vectron International 267 267 Lowell 40 Road, Unit Unit 102, 102, 60 Hudson, NH NH % 03051 Tel: Tel: 1-88-VECTRON-1 http://www.vectron.com @ 50% => 15 MHz 15 pf 2 of 8 ACMOS or TTL 1.0 to 23.9 MHz ACMOS or TTL 24 to 49.9 MHz ACMOS or TTL 50 to 125.00 MHz ACMOS 1.0 to 14.9 MHZ ACMOS 15.0 to 39.9 MHZ ACMOS 40.0 to 59.9 MHZ ACMOS 60.0 to 84.9 MHZ ACMOS 85.0 to 124.9 MHZ ACMOS 125.0 to 170.0 MHZ ACMOS 1.0 to 14.9 MHZ ACMOS 15.0 to 39.9 MHZ ACMOS 40.0 to 59.9 MHZ ACMOS 60.0 to 84.9 MHZ ACMOS 85.0 to 124.9 MHZ ACMOS 125.0 to 170.0 MHZ with Vs=5.0V and 15pF load with Vs=3.3V and 15pF load with Vs= 2.5V and 15pF load with Vs= 1.8V and 15pF load with Vs=5.0V and 15pF load with Vs=3.3V and 15pF load with Vs=2.5V and 15pF load with Vs=1.8V and 15pF load 1.0 to 23.9 MHz 24.0 to 79.9 MHz 80.0 to 125.0 MHz

Signal Load Signal Level (Vol) Signal Level (Voh) Rise and fall times for ACMOS (measured 0.8 V to 2.0 V) Duty cycle Performance Specificatio Frequency Stabilities Parameter Min Typ Max Units Condition 45 40 TTL 10 TTL 0.4 +2.4 5 3 55 60 % % Absolute Maximum Ratings 1.0 to 23.9 MHz 24.0 to 125 MHz @ 1.4V < 15 MHz @ 1.4V >= 15 MHz Supply voltage (Vs) 7.0 V with Vs=5.0 and 3.3 Supply voltage (Vs) 3.6 V with Vs=2.5 and 1.8 Operable temperature range -55 +125 C Storage temperature range -62 +125 C Screening Output Enable Hi Vectron Verification Additional Parameters Class B, MIL-PRF-55310, Rev. E Logic 0 input = Outputs disabled (Tri-state) Logic 1 or floating input = Outputs enabled Output Enable Lo Logic 1 input = Outputs disabled (Tri-state) Logic 0 or floating input = Outputs enabled Processing & Packing Handling & processing note Standard Environmentals Vibration MIL-STD-202, Method 204, Condition G (30 G, 10Hz-2000Hz) Shock MIL-STD-202, Method 213, Condition E (1000g, 0.5ms, 1/2 sine) Acceleration MIL-STD-883, Method 2001, Condition A (5000 G, Y1 Plane) Temperature Cycling MIL-STD-883, Method 1010, Condition B Thermal Shock MIL-STD-202, Method 107, Condition B Solderability MIL-STD-202, Method 208 Leak Test (Fine and Gross) MIL-STD-883, Method 1014, Condition A1 and C1 3 of 8

Phase Noise Plot 4 of 8

Outline Drawing / Enclosure Dimeio in inches (mm) Pin Connectio 1 Enable, Disable, or No Connection 4 Case Ground 5 Output 8 B+ (+5 Supply Voltage) Standard Shipping Method 5 of 8

Recommended Reflow Profiles for Pb-Free & Sn-Pb T p tp Critical Zone T L to T p T L Ts Ramp up t L Ramp dow n Temperature Ts ts preheat 25 t 25 C to peak Time 230 C Reflow Profile Profile Feature Sn-Pb Assembly Profile Feature Sn-Pb Assembly Average ramp-up rate (TL to TP) 3 C/secod max. Time 25 C to Peak Temperature 4 minutes max. Preheat - Temperature min Tsmin 135 C Time maintained above - Temperature Min Tsmax 155 C - Temperature (TL) 183 C Standard Shipping Method - Time (min to max) (ts) 60-90 seconds - Time (tl) 45-60 seconds Tsmax to TL -Ramp-up Rate 3 C/secod max. Time maintained above - Temperature (TL) 183 C Time within 5 C of actual 10-20 seonds max. - Time (TL) 40-60 seconds Peak Temperature (tp) Peak Temperature (Tp) max 230 C Ramp-down Rate 6 C/second max. Note: All temperatures refer to topside of the package, measured on the package body surface. 260 C Reflow Profile Profile Feature Pb-Free Assembly Profile Feature Pb-Free Assembly Average ramp-up rate (TL to TP) 3 C/secod max. Time 25 C to Peak Temperature 8 minutes max. Preheat - Temperature min Tsmin 150 C Time maintained above - Temperature min Tsmax 200 C - Temperature (TL) 217 C - Time (min to max) (ts) 60-180 seconds - Time (tl) 60-150 seconds Tsmax to TL -Ramp-up Rate 3 C/secod max. Time maintained above - Temperature (TL) 217 C Time within 5 C of actual 20-40 seonds max. - Time (TL) 60-150 seconds Peak Temperature (tp) Peak Temperature (Tp) max 260 C Ramp-down Rate 6 C/second max. Note: All temperatures refer to topside of the package, measured on the package body surface. 6 of 8

Ordering Information PX - 421 0 - D A E - F K A B - 10M0000000 Product Family PX: PXO Package 421: 4 pin 1/2 DIP Configuration 0: Through Hole 1: Through Hole (with Sn/Pb coated leads) 2: Through Hole (with SAC305 coated leads) 3: SMD 4: SMD (with Sn/Pb coated leads) 5: SMD (with SAC305 coated leads) Supply Voltage D: 5 Vdc ±5% E: 3.3 Vdc ±5% H: 2.5 Vdc ±5% J: 1.8 Vdc ±5% RF Output Code A: ACMOS B: TTL Temperature Range A: -55 C to +85 C B: -55 C to +105 C C: -55 C to +125 C E: -40 C to +85 C T: 0 C to +70 C Accuracy Code @ 25 C Temperature Stability Code ( Reference to Table: I ) Frequency Screening Option B: MIL-PRF-55310 B level X: No Screening Enable Code A: Enable Hi, Tristate C: Enable Lo, Tristate X: No Enable D: ±15 F: ±25 K: ±50 P: ±80 S: ±100 Z: ±65PPM X: Use with Overall Tolerance Code or Overall Temp Stability Code D: ±15 ( Reference to Table: II ) F: ±25 K: ±50 P: ±80 S: ±100PPM Z: ±65PPM Available Temperature Stability Code Temp Range Temp Stability A: -55 C to +85 C K: ± 50 Z ± 65 B: -55 C to +105 C P ± 80 C: -55 C to +125 C S ± 100 F: ± 25 K: ± 50 E: -40 C to +85 C Z ± 65 P ± 80 S ± 100 D: ± 15 F: ± 25 K: ± 50 T: 0 C to +70 C Z ± 65 P ± 80 S ± 100 Table: I Available Overall Tolerance Code Temp Range Overall Tolerance Temp Stability A: -55 C to +85 C Z: ± 65 X B: -55 C to +105 C P: ± 80 X C: -55 C to +125 C S: ± 100 X K: ± 50 X Z: ± 65 X E: -40 C to +85 C P: ± 80 X S: ± 100 X F: ± 25 X K: ± 50 X T: 0 C to +70 C Z: ± 65 X P: ± 80 X S: ± 100 X Table: II 7 of 8

This Page Intentionally Left Blank Notes: 1. Contact factory for improved stabilities or additional product optio. Not all optio and codes are available at all frequencies. 2. Unless other stated all values are valid after warm-up time and refer to typical conditio for supply voltage, frequency control voltage, load, temperature (25 C). 3. Phase noise degrades with increasing output frequency. 4. Subject to technical modification. 5. Contact factory for availability. For Additional Information, Please Contact USA: Vectron International 267 Lowell Road, Unit 102 Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 Europe: Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 3328.4784.17 Fax: +49 (0) 3328.4784.30 Asia: Vectron International 68 Yin Cheng Road(C), 22nd Floor One LuJiaZui Pudong, Shanghai 200120, China Tel: 86.21.6194.6886 Fax: 86.21.6194.6699 Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Rev: 7/20/2017 JV 8 of 8