RoHS 2002/95/EC. Driver and LED life are rated up to 80, C (104 F).

Page 1 of 10 Façade Large Areas Building Accent Wall Wash Sign Lighting Specifications Pb lead-free RoHS 2002/95/EC RATED SYSTEM LIFE (LED life per ) PREDICTED LED LIFE CONSTRUCTION THERMAL management led board and array DRIVER led optical system mounting FINISH LISTINGS WARRANTY Driver and LED life are rated up to 80,000 hrs @ 40 C (104 F). See page 5-10 for predicted LED life. Die-cast aluminum housing with corrosion resistant hardware. -32G1 and 80G1 have a 22 optical opening. Dedicated optic chamber and separate driver housing constructed to IP66. Die-cast aluminum heatsink allows for long life of LEDs up to 40 C ambient. IP66 rated thermal Pod frame management system creates a vortex of airflow with passthrough convective cooling system and heat extraction. 32 or 80 Rebel ES LEDs. Color temperature: Neutral White 4000K +/- 250K; CRI 60. Metal core printed circuit board. RoHS compliant. High efficiency multi-volt driver (50 or 60 Hz), maintains constant current flow to LEDs to accommodate LED variations. High power factor (>90% standard). Constant current: 350, 530 or 700 ma. Voltage: 120-277, 347-480. Temperature range: -40 C (-40 F) to 40 C (104 F). Open / short circuit protection. RoHS compliant. Surge protector standard. The surge protector is in accordance with IEEE / ANSI C62.41.2 guidelines, with a surge current rating of 10,000 amps. SP - Spot, NBF - Narrow, MBF - Medium, WBF1 - Wide #1, WBF2 - Wide #2, and HBF - Horizontal distributions. See optical data for details. Fully gasketed Dust-Tite construction. Employs Philips LEDGINE technology & Rebel ES LEDs. Optical assemblies are field rotatable. Die-cast mastfitter (MA2) is vertically adjustable, suitable for mounting to a 2-3/8 O.D. vertical tenon. Mastfitter features cast-in aiming calibrations and an internal splice box with gasketed access cover. Standard textured finishes available. TDB - Textured Dark Bronze, TSA - Textured Satin Aluminum, TPG - Textured Philips Gray, TGR - Textured Gray, TWHT - Textured White, TBK - Textured Black, and TGN - Textured Green. ETL/cETL Listed luminaire, to the UL 1598 standard, suitable for Wet Locations. Suitable for use in ambients from -40 to 40 C (-40 to 104 F). Optic chamber and separate driver housing constructed to IP66. Mechanical, finish and LED engine & components shall be covered by a limited 5-year warranty. See terms and conditions for details. Quality Lighting is a Philips group brand

ORDERING EXAMPLE ORDERING INFORMATION series # of LEDs Driver LED COlor distribution voltage mounting options 6 finish accessories - - - NW - - - MA2 - - 32G1 80G1-32G1-700-NW-SP-120-MA2-F1-TPG 530 700 350 530 NW SP NBF MBF WBF1 WBF2 HBF 120 MA2 F1 2 DM25 5 TSA F1-KIT 2 208 F2 2 DM50 5 TDB F2-KIT 2 240 F3 2 DM75 5 TBK F3-KIT 2 2,3 PCB SG-1 347 4 DE25 DD TWHT DYN-KIT1 277 DS25 5 DE50 5 TGR DYN-KIT2 480 DS50 5 DE75 5 Tpg PTA-2180-16.5-(F) UNV 1 DS75 5 DCP 5 tgn RAL(*) PTA-2090-16.5-(F) PTA-3090-16.5-(F) PTA-4090-16.5-(F) WMB-16.5-(F) Page 2 of 10 series # of LEDs 32G1 80G1 Driver 530 700 350 530 LED COlor Distribution NW Neutral (18.4 x 17.9) White 4000K NBF Narrow Flood (33.8 x 33.8) voltage mounting 120 MA2 Flood 208 Mastfitter 240 Mount 277 347 480 UNV 1 ü ü SP Spot ü MBF Medium Flood (72.2 x 65.2) WBF1 Wide Flood #1 (77.3 x 96.8) WBF2 Wide Flood #2 (79.4 x 121.1) HBF Horizontal Flood (115.1 x 81.4) NoTES: 1) UNV universal voltage, 120-277V. 2) Specify voltage. Fusing not available with UNV voltage option. 3) PCB option not available in 480V. 4) 0-10V leads exiting luminaire arm supplied for connection to external secondary controls (by others). 5) Dynadimmer options and accessories are only available in 120-277V. 6) is compatible with a wide range of non-programmable and programmable occupancy sensors, wireless controls and asset management systems (by others). Contact factory. options 6 F1 2 Single Fusing 120, 277, 347V F2 2 Double Fusing 208, 240, 480V F3 2 Double Fusing 208, 240, 480V Canadian Double Pull PCB 2,3 Photocell Button DD 4 Dimming Driver DS25 5 DS50 5 DS75 5 Dynadimmer Safety Profile (25% Low) Dynadimmer Safety Profile (50% Low) Dynadimmer Safety Profile (75% Low) DM25 5 Dynadimmer Median Profile (25% Low) DM50 5 Dynadimmer Median Profile (50% Low) DM75 5 Dynadimmer Median Profile (75% Low) DE25 5 DE50 5 DE75 5 DCP 5 Dynadimmer Economy Profile (25% Low) Dynadimmer Economy Profile (50% Low) Dynadimmer Economy Profile (75% Low) Dynadimmer Custom Programming finish TSA Textured Satin Aluminum TDb Textured Dark Bronze TBK Textured Black TWHT Textured White TGR Textured Gray TPG Textured Philips Gray Tgn Textured Green RAL(*) Custom Color (*=Specify RAL #) accessories F1-KIT 2 Single Fusing Field Installed Kit (120, 277, 347V) F2-KIT 2 Double Fusing Field Installed Kit (208, 240, 480V) F3-KIT 2 Double Fusing Field Installed Kit (208, 240, 480V) Canadian Double Pull SG-1 Stone Guard dimensions Top View 17.2 43.6 cm 17.2 43.6 cm Side View 4.3 10.9 cm DYN-KIT1 DYN-KIT2 PTA-2180-16.5-(F) PTA-2090-16.5-(F) PTA-3090-16.5-(F) Dynadimmer USB Cable Kit (for field programming) Dynadimmer Handheld Programmer Kit (for field programming) 4.3 10.9 cm Pole Top Adapter, 2@180 (specify finish) Pole Top Adapter, 2@90 (specify finish) 4.3 10.9 cm Pole Top Adapter, 3@90 (specify finish) 4.9 12.4 cm 4.9 12.4 cm Photocell button 3.0 7.62 cm 9.88 25.08 cm Photocell button4.3 10.9 cm 9.88 25.08 cm 30.23 76.8 cm 30.23 76.8 cm Weight: 30.4 Lbs 13.8 Kg epa: 3.08 Sq. Ft. PTA-4090-16.5-(F) WMB-16.5-(F) Pole Top Adapter, 4@90 (specify finish) Wall Mounting Bracket (specify finish) 3.0 7.62 cm 3.0 7.62 cm See page 4 for Pole and Wall Mount Accessory details. 3.0 7.62 cm

Page 3 of 10 DISTRIBUTION PATTERNS Spot sp (18.4 H x 17.9 V) 50% Main : 18.4 H x 17.9 V 10% Field : 34.7 H x 33.7 V Narrow Flood nbf (33.8 H x 33.8 V) 50% Main : 33.8 H x 33.8 V 10% Field : 92.1 H x 92.1 V Medium Flood mbf (72.2 H x 65.2 V) 50% Main : 72.2 H x 65.2 V 10% Field : 101.9 H x 102.2 V Wide Flood #1 Wbf1 (77.3 H x 96.8 V) 50% Main : 77.3 H x 96.8 V 10% Field : 98.8 H x 110.4 V Wide Flood #2 Wbf2 (79.4 H x 121.1 V) 50% Main : 79.4 H x 121.1 V 10% Field : 98.8 H x 135.3 V Horizontal Flood hbf (115.1 H x 81.4 V) 50% Main : 115.1 H x 81.4 V 10% Field : 128.3 H x 100.9 V Represents the 50% main beam. Represents the 10% field beam. Note: Shaded orange 50% Main s and shaded green 10% Field s are for visual reference only and are not to scale as beams may vary by LED array and driver. angles shown are for reference only and may vary by LED array and driver choice. Please see optical data for specific beam information. For questions, contact factory for application engineering assistance. OPTICAL Data Cat No. Optic (distribution) Initial Delivered Lumens Max Candela 50% (hor) 50% (vert) 10% Field (hor) 10% Field (vert) NEMA (hor) NEMA (vert) # of LEDs IES File # -32G1-530 SP 4,486 24,217 18.4 17.9 34.7 33.7 3h 3V 32-32G1-530-NW-SP.ies -32G1-530 NBF 4,538 6,986 33.8 33.8 92.1 92.1 5h 5V 32-32G1-530-NW-NBF.ies -32G1-530 MBF 4,588 3,241 72.2 65.2 101.9 102.2 6h 6V 32-32G1-530-NW-MBF.ies -32G1-530 WBF1 4,572 2,237 77.3 96.8 98.8 110.4 5h 6V 32-32G1-530-NW-WBF1.ies -32G1-530 WBF2 4,473 1,751 79.4 121.1 98.8 135.3 5h 7V 32-32G1-530-NW-WBF2.ies -32G1-530 HBF 4,521 3,047 115.1 81.4 128.3 100.9 6h 6V 32-32G1-530-NW-HBF.ies -32G1-700 SP 5,985 32,306 18.4 17.9 34.7 33.7 3h 3V 32-32G1-700-NW-SP.ies -32G1-700 NBF 6,054 9,320 33.8 33.8 92.1 92.1 5h 5V 32-32G1-700-NW-NBF.ies -32G1-700 MBF 6,121 4,324 72.2 65.2 101.9 102.2 6h 6V 32-32G1-700-NW-MBF.ies -32G1-700 WBF1 6,099 2,985 77.3 96.8 98.8 110.4 5h 6V 32-32G1-700-NW-WBF1.ies -32G1-700 WBF2 5,967 2,336 79.4 121.1 98.8 135.3 5h 7V 32-32G1-700-NW-WBF2.ies -32G1-700 HBF 6,032 4,066 115.1 81.4 128.3 100.9 6h 6V 32-32G1-700-NW-HBF.ies -80G1-350 SP 7,722 41,683 18.4 17.9 34.7 33.7 3h 3V 80-80G1-350-NW-SP.ies -80G1-350 NBF 7,812 12,025 33.8 33.8 92.1 92.1 5h 5V 80-80G1-350-NW-NBF.ies -80G1-350 MBF 7,897 5,579 72.2 65.2 101.9 102.2 6h 6V 80-80G1-350-NW-MBF.ies -80G1-350 WBF1 7,869 3,851 77.3 96.8 98.8 110.4 5h 6V 80-80G1-350-NW-WBF1.ies -80G1-350 WBF2 7,698 3,014 79.4 121.1 98.8 135.3 5h 7V 80-80G1-350-NW-WBF2.ies -80G1-350 HBF 7,783 5,246 115.1 81.4 128.3 100.9 6h 6V 80-80G1-350-NW-HBF.ies -80G1-530 SP 11,693 63,118 18.4 17.9 34.7 33.7 3h 3V 80-80G1-530-NW-SP.ies -80G1-530 NBF 11,829 18,208 33.8 33.8 92.1 92.1 5h 5V 80-80G1-530-NW-NBF.ies -80G1-530 MBF 11,958 8,447 72.2 65.2 101.9 102.2 6h 6V 80-80G1-530-NW-MBF.ies -80G1-530 WBF1 11,916 5,831 77.3 96.8 98.8 110.4 5h 6V 80-80G1-530-NW-WBF1.ies -80G1-530 WBF2 11,657 4,564 79.4 121.1 98.8 135.3 5h 7V 80-80G1-530-NW-WBF2.ies -80G1-530 HBF 11,785 7,944 115.1 81.4 128.3 100.9 6h 6V 80-80G1-530-NW-HBF.ies

Page 4 of 10 AIMING DIAGRAMS 0º 0º 0º 90º 90º -90º -90º 90º -90º 105º 105º -105º MA2 Mastfitter is field rotatable in 2 increments from 105 (backward) to -105 (forward). MOUNTING ACCESSORy Details Pole Top Adaptors PTA-2180-16.5-(F) Pole Top Adapter, 2@180 PTA-2090-16.5-(F) Pole Top Adapter, 2@90 PTA-3090-16.5-(F) Pole Top Adapter, 3@90 PTA-4090-16.5-(F) Pole Top Adapter, 4@90 (specify finish) Permits installation of luminaires equipped with mastfitter (MA2) in any of the configurations shown. Fits poles having a 2-3/8 OD x 4 vertical tenon. 16.5 (41.91cm) additional EPA: 0.75 additional EPA: 1.2 additional EPA: 1.0 additional EPA: 2 @ 180 2 @ 90 3 @ 90 4 @ 90 1.5 Vertically mounted 2-3/8 OD tenons welded to extruded aluminum arms with removeable end cap for wiring. Arms bolted to cast aluminum pole top bracket. Components shipped separately. Field assembly required. Wall Mount Bracket 6.0 (15.24cm) WMB-16.5-(F) Wall Mounting Bracket (specify finish) 0.625 (1.57cm) dia. 4 pl. typ. 16.5 (41.91cm) 5.0 (12.70cm) 4.0 (10.16cm) 5.38 (13.65cm) 2-3/8 OD vertical tenon welded to extruded aluminum arm with removeable end cap for wiring. Arm is bolted to a cast aluminum plate that has four 5/8 diameter mounting holes. Mounting hardware by others.

Page 5 of 10 TECHNICAL Data - -32G1 @ 530 ma (Wide Flood WBF1 distribution, 4000 K +/- 250K CCT standard) Input Watts 50 Initial Lumens @ 25 C Ambient 4588 Lumens per Watt @ 25 C Ambient 92 Initial Lumens @ 40 C Ambient 4441 Lumens per Watt @ 40 C Ambient 89 1. Technical data and performance are subject to change. 2. Due to LED forward voltage variations and driver efficiency, total system watts could vary +/-5%. JUNCTION TEMPERATURES Measured Junction Temperatures (Tj) -32G1 LED Unit (530 ma) 70 60 Tj - 63 C Tj - 78 C (25 C ambient) (40 C ambient) Maximum Tj Limit 127 C LIFETIME (1000 HRS) 50 40 30 20 10 50% Below Thermal Limit 39% Below Thermal Limit Rebel ES lifetime curve 40 50 60 70 80 90 100 110 120 130 140 150 160 JUNCTION TEMPERATURE ( C) Green shaded portion represents junction temperatures below LED manufacturer s recommended limit to ensure a minimum of 60,000 hours of rated life. Life Expectancy Table Above the minimum 80,000 Rated LED Life at Multiple Ambient Temperatures 32G1 LED Unit (530mA, ) Average Outdoor Ambient Temp Junction Temp (Tj) (Hrs) Efficacy (Lumens / Watt) @ 10 Hrs/Day (Yrs) -20 C / -4 F 18 197,341 86 54-10 C / 14 F 28 184,671 85 51 0 C / 32 F 38 172,339 84 47 10 C / 50 F 48 160,346 82 44 25 C / 77 F 63 144,200 81 40 30 C / 86 F 68 136,500 79 37 35 C / 95 F 73 131,845 79 36 40ºC / 104ºF 78 126,396 78 35 Note: LED rated life per the curve above is 60,000 hrs. The tables below showing predicted LED life expectency are based on s superior thermal management, actual junction temperature (Tj) and projected curves. The projected life in years may be extended even further if used with dimming options.

Page 6 of 10 TECHNICAL Data - -32G1 @ 700 ma (Wide Flood WBF1 distribution, 4000 K +/- 250K CCT standard) Input Watts 70 Initial Lumens @ 25 C Ambient 6121 Lumens per Watt @ 25 C Ambient 87 Initial Lumens @ 40 C Ambient 5986 Lumens per Watt @ 40 C Ambient 86 1. Technical data and performance are subject to change. 2. Due to LED forward voltage variations and driver efficiency, total system watts could vary +/-5%. JUNCTION TEMPERATURES Measured Junction Temperatures (Tj) -32G1 LED Unit (700 ma) 70 60 Tj - 77 C Tj - 87 C (25 C ambient) (35 C ambient) Maximum Tj Limit 127 C LIFETIME (1000 HRS) 50 40 30 20 10 39% Below Thermal Limit 31% Below Thermal Limit Rebel ES lifetime curve 40 50 60 70 80 90 100 110 120 130 140 150 160 JUNCTION TEMPERATURE ( C) Green shaded portion represents junction temperatures below LED manufacturer s recommended limit to ensure a minimum of 60,000 hours of rated life. Life Expectancy Table Above the minimum 80,000 Rated LED Life at Multiple Ambient Temperatures 32G1 LED Unit (700mA, ) Average Outdoor Ambient Temp Junction Temp (Tj) (Hrs) Efficacy (Lumens / Watt) @ 10 Hrs/Day (Yrs) -20 C / -4 F 32 168,908 76 46-10 C / 14 F 42 157,507 75 43 0 C / 32 F 52 146,417 74 40 10 C / 50 F 62 135,637 72 37 25 C / 77 F 77 120,048 71 33 30 C / 86 F 82 115,007 70 32 35 C / 95 F 87 110,044 69 30 40ºC / 104ºF - - - - Note: LED rated life per the curve above is 60,000 hrs. The tables below showing predicted LED life expectency are based on s superior thermal management, actual junction temperature (Tj) and projected curves. The projected life in years may be extended even further if used with dimming options.

Page 7 of 10 TECHNICAL Data - -80G1 @ 350 ma (Wide Flood WBF1 distribution, 4000 K +/- 250K CCT standard) 80G1 @ 350 ma 1 (Wide Flood WBF1 distribution, 4000 K +/- 250K CCT standard) Input Watts 89 Initial Lumens @ 25 C Ambient 7897 Lumens per Watt @ 25 C Ambient 89 Initial Lumens @ 40 C Ambient 7732 Lumens per Watt @ 40 C Ambient 87 1. Technical data and performance are subject to change. 2. Due to LED forward voltage variations and driver efficiency, total system watts could vary +/-5%. JUNCTION TEMPERATURES Measured Junction Temperatures (Tj) -80G1 LED Unit (350 ma) 70 60 Tj - 57 C Tj - 72 C (25 C ambient) (40 C ambient) Maximum Tj Limit 127 C LIFETIME (1000 HRS) 50 40 30 20 10 55% Below Thermal Limit 43% Below Thermal Limit Rebel ES lifetime curve 40 50 60 70 80 90 100 110 120 130 140 150 160 JUNCTION TEMPERATURE ( C) Green shaded portion represents junction temperatures below LED manufacturer s recommended limit to ensure a minimum of 60,000 hours of rated life. LIFE EXPECTANCY Life Expectancy Table Above the minimum 80,000 Rated LED Life at Multiple Ambient Temperatures 80G1 LED Unit (350mA, ) Note: LED rated life per the curve above is 60,000 hrs. The tables below showing predicted LED life expectency are based on s superior thermal management, actual junction temperature (Tj) and projected curves. The projected life in years may be extended even further if used with dimming options. Average Outdoor Ambient Temp Junction Temp (Tj) 80G1 LED (350mA) (Hrs) Efficacy (Lumens / Watt) @ 10 Hrs/Day (Yrs) -20 C / -4 F 12 219,528 91 60-10 C / 14 F 22 205,704 90 56 0 C / 32 F 32 192,246 88 53 10 C / 50 F 42 179,155 86 49 25 C / 77 F 57 160,204 84 44 30 C / 86 F 62 154,070 83 42 40 C / 104 F 72 142,077 82 39

Page 8 of 10 TECHNICAL Data - -80G1 @ 530 ma (Wide Flood WBF1 distribution, 4000 K +/- 250K CCT standard) 80G1 @ 530 ma 1 (Wide Flood WBF1 distribution, 4000 K +/- 250K CCT standard) Input Watts 127 Initial Lumens @ 25 C Ambient 11958 Lumens per Watt @ 25 C Ambient 94 Initial Lumens @ 40 C Ambient 11576 Lumens per Watt @ 40 C Ambient 91 1. Technical data and performance are subject to change. 2. Due to LED forward voltage variations and driver efficiency, total system watts could vary +/-5%. JUNCTION TEMPERATURES Measured Junction Temperatures (Tj) -80G1 LED Unit (530 ma) 70 60 Tj - 71 C Tj - 86 C (25 C ambient) (40 C ambient) Maximum Tj Limit 127 C LIFETIME (1000 HRS) 50 40 30 20 10 44% Below Thermal Limit 32% Below Thermal Limit Rebel ES lifetime curve 40 50 60 70 80 90 100 110 120 130 140 150 160 JUNCTION TEMPERATURE ( C) Green shaded portion represents junction temperatures below LED manufacturer s recommended limit to ensure a minimum of 60,000 hours of rated life. LIFE EXPECTANCY Life Expectancy Table Above the minimum 80,000 Rated LED Life at Multiple Ambient Temperatures 80G1 LED Unit (530mA, ) Note: LED rated life per the curve above is 60,000 hrs. The tables below showing predicted LED life expectency are based on s superior thermal management, actual junction temperature (Tj) and projected curves. The projected life in years may be extended even further if used with dimming options. Average Outdoor Ambient Temp Junction Temp (Tj) 80G1 LED (530mA) (Hrs) Efficacy (Lumens / Watt) @ 10 Hrs/Day (Yrs) -20 C / -4 F 26 189,674 88 52-10 C / 14 F 36 177,145 87 49 0 C / 32 F 46 164,954 84 45 10 C / 50 F 56 152,200 83 42 25 C / 77 F 71 135,957 81 37 30 C / 86 F 76 130,411 80 36 40 C / 104 F 86 119,573 78 33

Page 9 of 10 LED LUMEN MAINTENANCE Data - -32G1-32G1 @ 530 ma -32G1 @ 700 ma Outdoor Ambient Temp ( C) 1 5 10 15 20 25 30 35 40 5 10 15 20 25 30 35 40 Junction Temperature 2 55.3 60.3 65.3 70.3 75.3 80.3 85.3-36.9 41.9 46.9 51.9 56.9 61.9 66.9 71.9 Thermal Factor 3 1.04 1.03 1.02 1.01 1.00 0.99 0.98-1.04 1.03 1.02 1.01 1.00 0.99 0.98 0.97 0 1.04 1.03 1.02 1.01 1.00 0.99 0.98 0.97 1.04 1.03 1.02 1.01 1.00 0.99 0.98-8,000 / 2.2 1.04 1.02 1.01 1.00 0.99 0.98 0.97 0.96 1.03 1.02 1.01 1.00 0.99 0.98 0.97-16,000 / 4.4 1.03 1.02 1.01 0.99 0.98 0.97 0.96 0.95 1.02 1.01 1.00 0.99 0.98 0.96 0.95-24,000 / 6.6 1.02 1.01 1.00 0.98 0.97 0.96 0.95 0.93 1.01 1.00 0.99 0.97 0.96 0.95 0.93-32,000 / 8.8 1.01 1.00 0.99 0.97 0.96 0.95 0.94 0.92 1.00 0.99 0.97 0.96 0.95 0.93 0.91 - Life Hours of operation / Years based on 10 hrs/day burn cycle 40,000 / 11.0 1.00 0.99 0.98 0.96 0.95 0.94 0.92 0.91 0.99 0.98 0.96 0.95 0.93 0.91 0.90-48,000 / 13.2 0.99 0.98 0.97 0.95 0.94 0.93 0.91 0.90 0.98 0.96 0.95 0.93 0.92 0.90 0.88-56,000 / 15.3 0.98 0.97 0.96 0.94 0.93 0.92 0.90 0.88 0.97 0.95 0.94 0.92 0.90 0.88 0.85-64,000 / 17.5 0.98 0.96 0.95 0.93 0.92 0.90 0.89 0.87 0.96 0.94 0.92 0.90 0.88 0.86 0.83-72,000 / 19.7 0.97 0.95 0.94 0.92 0.91 0.89 0.87 0.85 0.94 0.93 0.91 0.88 0.86 0.83 0.81-80,000 / 21.9 0.96 0.94 0.94 0.91 0.90 0.87 0.85 0.83 0.93 0.91 0.88 0.86 0.83 0.81 0.78-88,000 / 24.1 0.95 0.94 0.92 0.90 0.88 0.85 0.83 0.81 0.91 0.89 0.86 0.84 0.81 0.79 0.76-96,000 / 26.3 0.94 0.93 0.90 0.88 0.86 0.83 0.81 0.79 0.89 0.86 0.84 0.81 0.79 0.76 0.74-104,000 / 28.5 0.93 0.91 0.89 0.86 0.84 0.81 0.79 0.76 0.87 0.84 0.82 0.79 0.76 0.73 0.71-112,000 / 30.7 0.91 0.89 0.87 0.84 0.82 0.79 0.76 0.74 0.84 0.82 0.78 0.75 0.73 0.71 0.69-120,000 / 32.9 0.89 0.87 0.85 0.82 0.80 0.76 0.74 0.71 0.81 0.78 0.75 0.72 0.70 0.68 - - 128,000 / 35.1 0.87 0.85 0.83 0.80 0.76 0.73 0.71 0.69 0.77 0.74 0.71 0.69 - - - - 136,000 / 35.1 0.86 0.83 0.80 0.76 0.73 0.70 0.68-0.73 0.70 0.68 - - - - - 144,000 / 39.5 0.84 0.80 0.76 0.72 0.70 - - - 0.68 - - - - - - - 152,000 / 41.6 0.79 0.74 0.71 0.68 - - - - - - - - - - - - 160,000 / 43.8 0.73 0.69 0.67 - - - - - - - - - - - - - 168,000 / 46.0 0.67 - - - - - - - - - - - - - - - 176,000 / 48.2 - - - - - - - - - - - - - - - - 184,000 / 50.4 - - - - - - - - - - - - - - - - 1. Outdoor ambient temperature is based on annual average operating air temperature as seen by the fixture within its environmental conditions. 2. Junction temperature is calculated from in-situ, solder point measurement per LED manufacturers recommendation, and will vary based on drive current and nominal forward voltage of the LED. 3. Thermal factor is a prorate or derate value based on the in-situ solder point measurement and the relative luminous flux provided by the LED manufacturer. 4. LED Lumen Maintenance Data chart is actual lumen adjustment per the operating ambient. No additional prorate or derate required.

Page 10 of 10 LED LUMEN MAINTENANCE DATA - -80G1-80G1 @ 350 ma -80G1 @ 530 ma Outdoor Ambient Temp ( C) 1 5 10 15 20 25 30 35 40 5 10 15 20 25 30 35 40 Junction Temperature 2 36.9 41.9 46.9 51.9 56.9 61.9 66.9 71.9 51.1 56.1 61.1 66.1 71.1 76.1 81.1 86.1 Thermal Factor 3 1.04 1.03 1.02 1.01 1.00 0.99 0.98 0.97 1.04 1.03 1.02 1.01 1.00 0.99 0.98 0.97 0 1.04 1.03 1.02 1.01 1.00 0.99 0.98 0.97 1.04 1.03 1.02 1.01 1.00 0.99 0.98 0.97 8,000 / 2.2 1.04 1.03 1.02 1.01 0.99 0.98 0.97 0.96 1.03 1.02 1.01 1.00 0.99 0.98 0.97 0.96 16,000 / 4.4 1.03 1.02 1.01 1.00 0.99 0.97 0.96 0.95 1.03 1.01 1.00 0.99 0.98 0.97 0.96 0.94 24,000 / 6.6 1.02 1.01 1.00 0.99 0.98 0.97 0.95 0.94 1.02 1.00 0.99 0.98 0.97 0.96 0.94 0.93 32,000 / 8.8 1.01 1.00 0.99 0.98 0.97 0.96 0.94 0.93 1.01 0.99 0.98 0.97 0.96 0.94 0.93 0.91 Life Hours of operation / Years based on 10 hrs/day burn cycle 40,000 / 11.0 1.01 1.00 0.98 0.97 0.96 0.95 0.93 0.92 1.00 0.98 0.97 0.96 0.94 0.93 0.91 0.90 48,000 / 13.2 1.00 0.99 0.98 0.96 0.95 0.94 0.92 0.91 0.99 0.97 0.96 0.95 0.93 0.92 0.90 0.88 56,000 / 15.3 0.99 0.98 0.97 0.95 0.94 0.93 0.91 0.90 0.98 0.96 0.95 0.94 0.92 0.90 0.89 0.86 64,000 / 17.5 0.98 0.97 0.96 0.95 0.93 0.92 0.90 0.89 0.97 0.95 0.94 0.92 0.91 0.89 0.87 0.84 72,000 / 19.7 0.98 0.96 0.95 0.94 0.92 0.91 0.89 0.88 0.96 0.94 0.93 0.91 0.89 0.87 0.84 0.82 80,000 / 21.9 0.97 0.96 0.94 0.93 0.91 0.90 0.88 0.86 0.95 0.93 0.92 0.90 0.87 0.85 0.82 0.80 88,000 / 24.1 0.96 0.95 0.94 0.92 0.91 0.89 0.86 0.84 0.94 0.92 0.90 0.88 0.85 0.83 0.80 0.78 96,000 / 26.3 0.96 0.94 0.93 0.91 0.89 0.87 0.85 0.82 0.93 0.90 0.88 0.86 0.83 0.81 0.78 0.76 104,000 / 28.5 0.95 0.93 0.92 0.90 0.87 0.85 0.83 0.80 0.91 0.88 0.86 0.84 0.81 0.78 0.76 0.73 112,000 / 30.7 0.94 0.93 0.90 0.88 0.86 0.83 0.81 0.79 0.89 0.86 0.84 0.82 0.79 0.76 0.73 0.71 120,000 / 32.9 0.93 0.91 0.89 0.86 0.84 0.82 0.79 0.76 0.87 0.84 0.82 0.79 0.76 0.73 0.71 0.69 128,000 / 35.1 0.91 0.89 0.87 0.85 0.82 0.80 0.77 0.74 0.85 0.83 0.79 0.76 0.73 0.71 0.68-136,000 / 35.1 0.90 0.87 0.85 0.83 0.80 0.77 0.74 0.71 0.83 0.79 0.75 0.72 0.70 0.68 - - 144,000 / 39.5 0.88 0.86 0.83 0.81 0.77 0.74 0.71 0.69 0.78 0.74 0.72 0.69 - - - - 152,000 / 41.6 0.86 0.84 0.82 0.77 0.74 0.71 0.68-0.73 0.70 0.68 - - - - - 160,000 / 43.8 0.85 0.82 0.77 0.73 0.70 0.68 - - 0.69 - - - - - - - 168,000 / 46.0 0.82 0.76 0.72 0.69 - - - - - - - - - - - - 176,000 / 48.2 0.75 0.71 0.67 - - - - - - - - - - - - - 184,000 / 50.4 0.68 - - - - - - - - - - - - - - - 1. Outdoor ambient temperature is based on annual average operating air temperature as seen by the fixture within its environmental conditions. 2. Junction temperature is calculated from in-situ, solder point measurement per LED manufacturers recommendation, and will vary based on drive current and nominal forward voltage of the LED. 3. Thermal factor is a prorate or derate value based on the in-situ solder point measurement and the relative luminous flux provided by the LED manufacturer. 4. LED Lumen Maintenance Data chart is actual lumen adjustment per the operating ambient. No additional prorate or derate required.