QUALITY HARDWOOD & IRON STAIR PARTS

QUALITY HARDOOD & IRON STAIR PARTS T E M S complete S T A I R A S E S Y S TO STAIRTRENDS

Inside This atalog the bottom square of the baluster and the turned portion aligns on each tread. alusters have a fi xed dowel pin and should be trimmed from the top. the bottom square and the turned portion of the baluster align with the rake (rise) of the stairway. These balusters have a loose dowel pin and should be trimmed from the bottom. The turned portion of the baluster remains the same for all baluster sizes. Starting a Staircase System...3 Post to Post...4 Over the Post...5 aluster Index...6-7 Standard Hardwood aluster & Post Selections olonial Series...8-9 Traditional Series... 10-11 Hampton Series...12-13 Tulliere Series... 14-15 Morning Glory Series...16-17 ontemporary Series...18 ox Newels ox Newels...19-20 Limited Reserve ollection ountry oods Series...21 yron Series... 22-23 Kings ourt Series... 24-25 Malvern Series... 26-27 Mercer Series... 28-29 oodbury Series...30-31 Lomond Series...32 Sussex Series...33 Hand arved Series... 34-36 Iron alusters Finishes... 38 ½ Square Iron alusters Decorative Series... 38-39 Designer alusters & Panels Series... 40 Knuckle Series... 40 Twist & asket Series...41 Scroll & Unique Series...42 Ribbon Series...43 Twist & asket ollarless - 41 Series... 44 elly alusters - 40 Series... 44 9 16 Square Iron alusters Gothic Hammered Series... 45 Santa Fe Forged Hammered Series...46 all Hammered Series...46 Old English Forged Hammered Series...46 Scroll Forged Hammered Series... 47 Tudor Forged Hammered Series... 47 Round Iron alusters Roman Round ½ Series...48 Arrow Round 9 16 Series...48 Gothic Round 9 16 Series...49 Venetian Series 5 8 Series...49 Iron Newels Matching Iron Newels...49 ¾ Square Iron alusters MEGA alusters Series...50 Iron Accessories Handrail rackets...39 Knuckles... 40 Iron Shoes ½ Square...41 Installation Products...43 Iron Shoes Universal ½ & 9 16 Sq... 44 Iron Shoes 9 16 Square... 45 Iron Shoes ½ & 9 16 Round...48 Iron Newel Kit & 5 8 Shoes...49 Iron Shoes MEGA ¾ Square...50 ood Accessories Handrails...52 Handrail Fittings...53-54 all Rails, Rosettes & Accessories...55 Starting Steps...56 Treads, False Ends & Mouldings...57 Installation Hardware...58 Stairway Take-Off Notes...59 www.stairtrends.com

STARTING A STAIRASE SYSTEM The fi rst step in creating your stair system is choosing between an over the post or a post to post system (see pages 4 and 5). Over the post system hoose a wood or metal baluster design from pages 6 and 7. Move to the catalog page that features that baluster. For wood balusters choose a rail from the list on the left side of each baluster page. For metal balusters choose a rail from page 52. hoose your newels pictured with the baluster designs. If your stair begins with a starting step go to page 56. If you chose the Over-the-Post system then select the appropriate fi ttings from pages 53 and 54. www.stairtrends.com 3

SELETION GUIDE POS T TO POS T Starting Newel 5 Top Square Stair racket Half Newel Intermediate Landing Newel, 14 Top Square all Rail 2nd Floor Newel, 11 Top Square Starting Newel 5 Top Square Oval Rosette (2205A) Starting Newel 5 Top Square Over Easing, Returned End (2#03R) Post to Post onfigurations Starting Newels Landing and Angle Newels 2nd Floor Newels Starting Newel no Fitting Starting Newel with Fitting Landing Newel (14 Square) no Fitting Angle Newel (5 Square) with Fitting 2nd Floor Newel (11 Square) no Fitting Starting Newel at 2nd Floor (5 Square) with Fitting ood Specie Selection Alder eech razilian herry herry Hickory Hard Maple Mahogany 4 www.stairtrends.com

SELETION GUIDE Gooseneck (2#28) with ap Round Rosette (2205) Starting Easing (2#00) Starting Newel Landing Newel Left Hand Turnout (2#14 or 2#14A) Gooseneck (2#28) with ap Over Easing (2#03) Left Hand Volute (2#10) Volute Newel Landing Newel Left Hand (2#26) Gooseneck with ap Right Hand (2#23) Gooseneck No ap Tread with Return 2 Riser Right Hand Gooseneck with ap (2#19) Right Hand Turnout (2#15) or (2#15A) Turnout Newel Double ullnose Starting Step Level Quarterturn with ap (2#09) Landing Newel Half Newel OVER THE POS T Handrail Fittings LH Volute LH Turnout Starting Easing Maple Oak (Red) Poplar Prime hite alnut hite Oak www.stairtrends.com 5

OOD ALUSTER INDEX Model # s are in white Model # s are in yellow 1075 1¼ sq Pg 16 1175 Pg 16 1265 1¼ sq Pg 16 1275 1¼ sq Pg 16 1365 1¼ sq Pg 16 1375 1¼ sq Pg 16 1465 Pg 16 1465-F Pg 16 1475 Pg 16 1475-F Pg 16 1565 Pg 16 1575 Pg 16 4205 5015 1¼ sq Pgs 8,10 4225 5035 1¼ sq Pg 10 4235 1¼ sq Pg 10 4230 5030 1¼ sq Pg 12 4241 5141 1¼ sq Pgs 8,10 4245 1¼ sq Pg 18 4255 Pg 18 4255- Pg 18 4255-F Pg 18 4255-F Pg 18 4255-FG Pg 18 4255-9P Pg 18 4266 4265 Pg 12 4267 5067 1¼ sq Pg 10 5070 1¼ sq Pg 12 4275 5300 Pg 12 4305 Pgs 8, 10 IRON ALUSTER INDEX 4341 Pgs 8,10 4565 2005-P Pg 14 4575 2015-P Pg 14 4665 2005-8 Pg 14 4675 2015-8 Pg 14 4766 4265-8 Pg 12 4775 5300-8 Pg 12 4865 2005-T Pg 14 4875 2015-T Pg 14 4965 2005-F Pg 14 4975 2015-F Pg 14 1ASK44 Pg 41 1ASK-LY Pg 44 1KNU44 Pg 40 1RI44 Pg 43 1T40-LY Pg 44 1T22 Pg 41 1T44 Pg 41 2ASK44 Pg 41 2KNU1ASK44 Pg 40 2KNU44 Pg 40 2RI44 Pg 43 2T44 Pg 41 R101 Pg 41 R102 Pg 41 R161 9/16 Pg 45 R801 Pg 43 R802 Pg 43 KNOT44 Pg 42 M-1-41 Pg 44 M-2-41 Pg 44 M-3-41 Pg 44 M-4-41 Pg 44 M-5-41 Pg 44 M321 Pg 42 M34044 Pg 41 M39944 Pg 38 M40144 Pg 40 M40244 Pg 40 M40840 Pg 40 M41144 Pg 40 M501 Pg 42 M55541 Pg 39 M601 Pg 42 M8044 Pg 43 M8544 Pg 43 M9044 9/16 Pg 46 MDS Pg 42 MHDS 9/16 Pg 47 MSS 9/16 Pg 42 PLA40-LY Pg 44 PLA44 Pg 41 R20044 9/16 Pg 48 R21044 9/16 Pg 48 RENPANEL Pg 39 6 www.stairtrends.com

Limited Reserve ollection Hand arved Y05 Pg 22 Y15 Pg 22 Y25 Pg 22 Y06 2 sq Pg 22 Y26 2 sq Pg 22 15 Pg 21 15E-F Pg 21 K05 Pg 24 K15 Pg 24 K05-R Pg 24 K15-R Pg 24 K05-8 Pg 24 K15-8 Pg 24 LM05 Pg 32 ME05 Pg 28 ME15 Pg 28 ME05-1T Pg 28 ME15-1T Pg 28 MV05 Pg 26 MV15 Pg 26 MV15 Pg 26 MV05- OPEN-F 2 sq Pg 26 MV15- OPEN-F 2 sq Pg 26 MV05-SQ Pg 26 MV15-SQ Pg 26 MV05-2RI Pg 26 MV15-2RI Pg 26 SS05 Pg 33 SS05-1AR Pg 33 SS05-1RI Pg 33 05 Pg 30 15 Pg 30 05-2AR Pg 30 15-2AR Pg 30 05-2RI Pg 30 15-2RI Pg 30 05-3RI Pg 30 15-3RI Pg 30 05- OPEN-T Pg 30 15- OPEN-T Pg 30 A1 Pg 36 G2 1¼ sq Pg 36 M10044 9/16 Pg 46 M11044 9/16 Pg 46 M12044 9/16 Pg 46 M13044 9/16 Pg 46 M13144 9/16 Pg 46 M13244 9/16 Pg 46 M13344 9/16 Pg 47 M13444 9/16 Pg 47 M13544 9/16 Pg 47 M13644 9/16 Pg 47 M13744 9/16 Pg 47 M14044 9/16 Pg 45 M14344 9/16 Pg 45 M15044 9/16 Pg 45 M16044 9/16 Pg 45 M19044 Pg 45 M20044 Pg 45 M301 Pg 42 M30344 9/16 Pg 47 M305 9/16 Pg 47 M308 9/16 Pg 47 M310 9/16 Pg 46 M331 Pg 42 R22044 9/16 Pg 48 R22544 9/16 Pg 48 R54044 9/16 Pg 49 R54344 9/16 Pg 49 R55044 9/16 Pg 49 R60044 Pg 48 R60144 Pg 48 R60244 Pg 48 R61144 Pg 48 R61244 Pg 48 R65044 5/8 Pg 49 R65244 5/8 Pg 49 R65644 5/8 Pg 49 R68044 5/8 Pg 49 AVE44 Pg 42 MEGA- PLA 3/4 Pg 50 MEGA- 1T 3/4 Pg 50 MEGA- 2T 3/4 Pg 50 MEGA- 1ASK 3/4 Pg 50 MEGA- 2ASK 3/4 Pg 50 MEGA- M501 3/4 Pg 50 MEGA- M601 3/4 Pg 50 MEGA- 1KNU 3/4 Pg 50 MEGA- 2KNU 3/4 Pg 50 www.stairtrends.com 7

OLONIAL SERIES Handrails 5000 5100 5200 ALUS TERS Options: Fluting add -F Reeded add -R Fluted 5015-F 5141-F Reeded 5208 ON THE LEVEL 4205 4241 4305 4341 ON THE RISE 5015 5141 Thickness (Square) 1¼ 1¼ 1¾ 1¾ 5015-R 5141-R 5226 5310 5400 5500 5700 5900 Available Lengths: 31, 34, 36, 39, and 42 The height of the bottom square and the turned portion stays the same for all baluster heights. The turned portion is always parallel to the tread. alusters are trimmed from the top. For rail specifi cations see page 52. ottom Rails 5210 Available Lengths: 34, 38, and 42 The bottom square becomes longer as the baluster height increases. The turned area is parallel to the rake (rise) of the stair. alusters are trimmed from the bottom (loose dowel pin). 5211 5260 1¾ 6111 5260 1¼ 1¼ 5241 6125 1¾ 6175 8 www.stairtrends.com

OLONIAL SERIES Over the Post NEELS VOLUTES/ TURNOUTS 3200A 3201 3210A 3227 3221 3221A 3222A Newels STARTING Height Turning Length ottom lock idth 3200A 43 27 15 3 Newels Height Turning ottom Length lock VOLUTE/TURNOUT (Adjustable) idth 3221 48 27 14 3 3201 48 27 20 3 LANDING 3210A 62 27 34 3 ANGLE (INDER) ottom VOLUTE (Use ith limbing Volute) 3221A 43 27 73/8 3 TURNOUT (Old ode 30-34) 3222A 43 27 8½ 3 3227 72 27 44 3 To use 3221A for code 34-38 specify a climbing volute 2210L, 2211L, 2810L, 2811L 3200A 3201 3210A 3227 3221A 3221 3222A Post to Post Finial A Posts 3180 3182 3195 3185 3186 STARTING Height A Top lock Turning Length ottom lock idth Starting newel w/fitting Starting newel no fitting Newels with an 11 top square are for 2 nd floor landings when NOT using fittings. alcony rail heights will be 36 when using this newel. 3180 48 5¼ 20¾ 19½ 3¼ 3182 54 5¼ 20¾ 25½ 3¼ 2ND FLOOR LANDING 3185 62 11 20¾ 27¾ 3¼ INTERMEDIATE LANDING 3186 62 14½ 18 27 3¼ ANGLE (INDER) 3195 72 5¼ 20¾ 43½ 3¼ Angle newel w/fitting Newels with an 14½ top square are for intermediate landings when NOT using fittings or for 2 nd floor landings and balcony rail heights over 36. 3180 3182 3195 3185 3186 www.stairtrends.com 9

TRADITIONAL SERIES Handrails Options: Fluting add -F Reeded add -R Fluted 5000 5100 5015-F 5035-F 5141-F Reeded 5200 5208 ON THE LEVEL 4205 4225 4235 4241 4305 4341 ON THE RISE 5015 5035 5141 5067 Thickness (Square) 1¼ 1¼ 1¼ 1¼ 1¼ 1¾ 1¾ 5015-R 5141-R 5226 5310 5400 5500 5700 5900 The height of the bottom square and the turned portion stays the same for all baluster heights. The turned portion is always parallel to the tread. alusters are trimmed from the top. For rail specifi cations see page 52. ottom Rails Available Lengths: 31, 34, 36, 39, and 42 5211 5260 1¾ 6111 5260 1¼ 1¼ 5210 5241 6125 Available Lengths: 34, 38, and 42 The bottom square becomes longer as the baluster height increases. The turned area is parallel to the rake (rise) of the stair. alusters are trimmed from the bottom (loose dowel pin). 1¾ 6175 10 www.stairtrends.com

TRADITIONAL SERIES Over the Post NEELS VOLUTES/ TURNOUTS 3205 3206 3260 3260 3261 Newels 3207A 3217A 3218A STARTING Height Turning Length ottom lock idth 3207A 43 30 3/ 16 11 13/ 16 3 LANDING 3217A 62 30 3/ 16 30 13/ 16 3 ANGLE (INDER) 3218A 72 30 3/ 16 40 13/ 16 3 ottom Newels Height Turning Length ottom lock VOLUTE/TURNOUT (ode 34-38) idth 3260 48 30 1/ 8 9 2¾ VOLUTE (Use ith limbing Volute) 3205 43 28¼ 5 7/ 8 2¼ 3260 43 30 1/ 8 4 2¾ TURNOUT (Old ode 30-34) 3206 44 28 1/ 8 9 3/ 8 2¼ 3261 43 31¾ 4 2¾ To use 3205 or 3260 for code 34-38 specify a climbing volute 2210L, 2211L, 2810L, 2811L 3207A 3217A 3218A 3205 3206 3260 3260 3261 Post to Post PLAIN ALL TOP Finial A Finial A Enhance Your Newels Upgrade your newels from 3 to 4 thick. Posts 3242 3240 3241 3255 3256 3245 3246 STARTING all Top Posts Height A Top lock Turning Length ottom lock idth 3240 3204 48 5 23¼ 17 3 3441 3445 3446 3241 3211 54 5 23¼ 23 3 3242 48 N/A N/A N/A 3 2ND FLOOR LANDING 3245 3214 62 11 23¼ 26¼ 3 3244 62 11 18¼ 32¾ 3 INTERMEDIATE LANDING 3246 3213 62 14½ 18¼ 28¼ 3 ANGLE (INDER) 3255 3215 72 5 23¼ 41 3 Yellow numbers denote available in enhanced models. 3411 3413 3414 3240 3241 3244 3245 3246 3255 3204 3211 3213 3214 3215 3242 www.stairtrends.com 11

HAMPTON SERIES Octagon Octagon Handrails Options: Fluting add -F Fluted 5000 5100 4265-F 5300-F 5030-F 5070-F 5200 5208 ON THE LEVEL 4230 4266 4275 4766 4775 ON THE RISE 5030 5070 4265* 5300 4265-8 5300-8 Thickness (Square) 1¼ 1¼ 1¾ 1¾ 1¾ 1¾ 4266 and 4275 may be ordered in 2 thickness: specify 4366 and 4375. 5226 5310 5400 5500 5700 Available Lengths: 31, 34, 36, 39, and 42 The height of the bottom square and the turned portion stays the same for all baluster heights. The turned portion is always parallel to the tread. alusters are trimmed from the top. Available Lengths: 34, 38, and 42 *(4265 balusters also available in 30 and 36 for stringer applications) The bottom square becomes longer as the baluster height increases. The turned area is parallel to the rake (rise) of the stair. alusters are trimmed from the bottom (loose dowel pin). DIVIDER SPINDLE Available in 1¾ x 48 4265-48 5900 For rail specifi cations see page 52. ottom Rails 5211 5260 1¾ 6111 5260 1¼ 1¼ 5210 5241 6125 1¾ 6175 12 www.stairtrends.com

HAMPTON SERIES Over the Post Octagon NEELS VOLUTES/ TURNOUTS Enhance Your Newels Upgrade your newels from 3¼ to 3¾ thick. Newels 3298 3298 3296 3294 3297 3798 3796 3794 3797 STARTING Newels (Octagon) Height Turning Length ottom lock idth 3298-43 25¾ 16¼ 3¼ 3298 3798 48 25¾ 21¾ 3¼ LANDING 3296 3796 62 25¾ 35¼ 3¼ VOLUTE/TURNOUT (ode 34-38) 3294 3794 48 28 12 1/8 3¼ VOLUTE (Use ith limbing Volute) 3294-43 247/8 85/8 3¼ TURNOUT (Old ode 30-34) 3297-43 257/8 9½ 3¼ To use 3294 for code 34-38 specify a climbing volute 2210L, 2211L, 2810L, 2811L Yellow numbers denote available in enhanced models. ottom 3398 3398 3396 3394 3397 3294 3294 3297 3794 3298 3298 3296 3798 3796 Post to Post Octagon PLAIN Finial A OTAGON Finial A A (suffi x) Spade Top OL (suffi x) olonial Top RT (suffi x) Round Top 3289 3#92 3290 3#99 3#93 3#91 3#95 Posts Posts (Octagon) Height STARTING A Top lock Turning Length ottom lock idth 3289 48 3½ 3292 3792 48 6½ 17½ 201/8 3½ 3299 3799 56 6½ 17½ 281/8 3½ 2ND FLOOR LANDING 3290 56 3½ 3293 3793 56 11 17½ 23¾ 3½ INTERMEDIATE LANDING 3291 72 3½ 3295 3795 72 14½ 17½ 201/8 3½ Yellow numbers denote available in enhanced models. Newels may be ordered 3 thick (example: 3292-030) Available post tops for 3289, 3290, 3291. Include the suffi x after the model number when ordering. Enhance Your Newels Upgrade your posts from 3½ to 4½ thick. 3492 3499 3493 3495 3289-OL 3290-OL 3291-OL 3292 3293 3295 3299 3792 3793 3795 3799 www.stairtrends.com 13

TULLIERE SERIES Octagon Twist Fluted Octagon Twist Fluted Handrails 5100 5208 5226 ON THE LEVEL 4575 4675 4875 4975 4565 4665 4865 4965 ON THE RISE 2015-P 2015-8 2015-T 2015-F 2005-P 2005-8 2005-T 2005-F Thickness (Square) 1¾ 1¾ 1¾ 1¾ 1¾ 1¾ 1¾ 1¾ 5310 5400 5700 5900 The height of the bottom square and the turned portion stays the same for all baluster heights. The turned portion is always parallel to the tread. alusters are trimmed from the top. For rail specifi cations see page 52. ottom Rails 5260 Available Lengths: 31, 34, 36, 39, and 42 1¾ 5260 1¾ 5241 The bottom square becomes longer as the baluster height increases. The turned area is parallel to the rake (rise) of the stair. alusters are trimmed from the bottom (loose dowel pin). 6175 Available Lengths: 34, 38, and 42 14 www.stairtrends.com

TULLIERE SERIES Over the Post Octagon Twist Fluted NEELS VOLUTES/ TURNOUTS 3#00 3#10 3#27 3#60 Plain Newels STARTING Octagon Newels Twist Newels Fluted Newels Height Turning Length ottom lock idth 3500 3600 3800 3900 43 27 15 3½ 3500 3600 3800 3900 48 27 20 3½ LANDING 3510 3610 3810 3910 56 27 28 3½ ANGLE (INDER) ottom 3527 3627 3827 3927 72 27 44 3½ VOLUTE/TURNOUT (ode 34-38) - ADJUSTALE 35## 3560 3660 3860 3960 48 27¼ 12 7/8 3½ series 36## series 38## series 39## series Post to Post Octagon Twist Fluted Top locks Finial A 5 5 3#42 3#55 5 11 3#42 3#45 3#46 3#55 Posts Octagon Posts STARTING Twist Posts Fluted Posts Height A Top lock Turning Length ottom lock idth 3542 3642 3842 3942 56 5 23 22 3½ 3#45 5 2ND FLOOR LANDING 3545 3645 3845 3945 56 11 18 22 3½ INTERMEDIATE LANDING 14 3546 3646 3846 3946 72 14 18 35 3½ 3555 3655 3855 3955 72 5 23 39½ 3½ 3#46 3542 3545 3546 3555 3642 3645 3646 3655 3842 3845 3846 3855 3942 3945 3946 3955 www.stairtrends.com 15

MORNING GLORY SERIES Handrails Reeded Reeded Reeded Reeded 5000 5100 5200 5208 1075 1275 1375 1175 1475 1575 1265 1365 1465 1565 1¼ Sq 1¼ Sq 1¼ Sq 1¾ Sq 1¾ Sq 1¾ Sq 1¼ Sq 1¼ Sq 1¾ Sq 1¾ Sq 5226 5310 Options: Fluting add -F Fluted 5400 5500 5700 Available Lengths: 34, 38, and 42 1465-F 1475-F 5900 For rail specifi cations see page 52. ottom Rails 5211 5260 1¾ 6111 5260 1¼ 1¼ 5210 5241 6125 1¾ 6175 16 www.stairtrends.com

MORNING GLORY SERIES Over the Post Reeded Reeded NEELS VOLUTES/ TURNOUTS 3001 3010 3027 3021 3101 3110 3127 3121 Newels STARTING Newels (Reeded) Height Turning Length ottom lock idth 3001 3101 50 23 26 3½ LANDING 3010 3110 58 23 34 3½ ANGLE (INDER) ottom 3027 3127 72 23 48 3½ VOLUTE/TURNOUT (ADJUSTALE) 3021 3121 48 23 14 3½ Newels may be ordered 3 thick (example: 3001-030) Reeded Newel 3021 3121 3001 3010 3027 3101 3110 3127 Post to Post Reeded PLAIN Finial A REEDED Finial A Top locks 3#40 5 11 Posts STARTING 3040 3045 3046 3055 3140 3145 3146 3155 Posts (Reeded) Height A Top lock Turning Length ottom lock idth 3040 3140 48 5 23 14½ 3½ 3#45 2ND FLOOR LANDING 3045 3145 58 11 23 22 3½ 14 INTERMEDIATE LANDING 3046 3146 72 14 23 36½ 3½ 3055 3155 72 5 23 39½ 3½ 3#46 Newels may be ordered 3 thick (example: 3040-030) 3040 3045 3046 3055 3140 3145 3146 3155 www.stairtrends.com 17

ONTEMPORARY SERIES hamfered Fluted hamfered & Fluted hamfered & Grooved hamfered, Fluted & Grooved Fluted & Grooved 6 V-Grooved 9 V-Grooved Rails 5235 20 5255 Thickness 1¼ 4245 4245-4245-F 4245-F 4245-G 4245-FG 4245-FG - - 1½ 4250 - - - - - - - - 1¾ 4255 4255-4255-F 4255-F 4255-G 4255-FG 4255-FG 4255-6P 4255-9P evel Top Newels hamfered Fluted hamfered, Fluted & Grooved 5275 Height 5285 4000 4001 4002 4003 Newels Height idth STARTING 4000 48 3½ 6100 4002 48 4 2ND FLOOR LANDING & ANGLE 4001 56 3½ 4003 56 4 Newels may be ordered 3 thick (example: 4000-030) NOTE: Most newels are available with the same milling options as the balusters. 4000 4001 4002 4003 4000-4001- 4000-F 4001-F 4000-FG 6100P For rail specifi cations see page 52. ottom Rails 6111 1¼ 6125 5260 1¾ 6175 18 www.stairtrends.com

OX NEELS Series 3 3⅛ Series 4 Use with any aluster Style 6 V-Grooved 9 V-Grooved Fluted Flat Panel Raised Panel 6¼ 7⅜ 249/16 66¾ 53 57⅜ 62 301 16 24 3½ Sq 7201 5 Sq 7201ADJ Adjustable 4½ Sq 7092 7092-6P 7092-9P 7094 7095-FP 7095-RP Series 6 Use with any aluster Style 6 V-Grooved 9 V-Grooved Fluted Flat Panel Raised Panel Removable ood Panels (shown with Iron Insert Package) 9 23 Series 6 ox Newels include both Peak and Flat aps. 55 23 6¼ Sq 7203 7203-6P 7203-9P 7204 7205-FP 7205-RP 7206 MORE OX NEELS ON THE NEXT PAGE. The 7206 (6¼ x 5 L) is available in Red Oak, Poplar, Hard Maple, herry and Alder. Each newel includes: removable fl at wood panels and loose stops. Order separately our iron insert packets in your choice of seven fi nishes (pyramid iron cap included) or create your own inserts: including iron, wood, or glass. www.stairtrends.com 19

OX NEELS Series 7 Use with any aluster Style 6 V-Grooved 9 V-Grooved Fluted Flat Panel Raised Panel 7⅜ 249/16 533/16 21¼ 7½ Sq 7403 7403-6P 7403-9P 7404 7405-FP 7405-RP Mixed Specie 1 2 3 Main newel with raised or fl at panels in a different specie. Main newel with a cap in a different specie. Main newel with molding in a different specie. Top lock Panels Options 2 Top Panel - 90 2 Top Panel - 180 ustom ox Newels Series 4, 6 or 7 can be customized for your building project. Add panels below the cap and above the top moulding. The panels can be on two or three sides. (your choice of which sides). Mix your species. The panels can have one specie and the box newel can be of another. The moulding and cap can either match the panel or the box newel specie. The sticking around the panels can be Shaker Style (square) or olonial (round) The panel between the mouldings can be divided into two or more panels. EZ Mount ase lock System EZ-01 kit is available for Series 6 (included) and Series 7 (option) ox Newels. Includes base block, lag screws and washers. 3 Top Panel Shown with 2 panels per side Round Sticking Square Sticking All of our box newel panels are standard with Round Sticking... order optional Square Sticking. 20 www.stairtrends.com

Limited Reserve ollection OUNTRY OODS SERIES The new premium Limited Reserve ollection was created to suit your signature style with a combination of classic and modern designs. The ountry oods Series features clean lines and a modern look. Over the Post Fluted Fluted NEELS VOLUTES/ TURNOUTS 74 75 78 60 Newels STARTING Height Turning Length idth 74 50 49 3½ LANDING 75 58 57 3½ ANGLE (INDER) 78 73 72 3½ VOLUTE/TURNOUT (Adjustable) 60 50 ADJ 3½ ottom 74 75 78 E74-F E75-F E78-F 15 E15-F Thickness 1¾ Available Lengths 34, 38, and 42 Post to Post Fluted Finial A 80 82 85 86 93 95 98 all Top Posts STARTING Height A Top lock Turning Length idth 80 48 5 39 3½ 82 58 5 49 3½ Available Lengths: 34, 38, and 42 The bottom square becomes longer as the baluster height increases. The turned area is parallel to the rake (rise) of the stair. alusters are trimmed from the bottom (loose dowel pin). 93 62 5 53 3½ 95 73 5 64 3½ 98 78 5 69 3½ 2ND FLOOR LANDING 85 58 11 43 3½ INTERMEDIATE LANDING 86 73 14½ 54½ 3½ 80 82 85 86 80-F 82-F 85-F 86-F www.stairtrends.com 21

YRON SERIES Limited Reserve ollection Handrails 5100 5208 The new premium Limited Reserve ollection was created to suit your signature style with a combination of classic and modern designs. The yron Series focuses on a center ball detail and is offered in two unique versions: the standard and Euro styles. Euro style Euro style Options: Reeded all add -R Decorative ALUS TERS Y##-R Options: eapple all add -P Decorative 5226 ON THE RISE Y05 Y06 Y15 Y25 Y26 Thickness (Square) 1¾ 2 1¾ 1¾ 2 Y##-P 5310 Rounded 5400 5700 5900 For rail specifi cations see page 52. ottom Rails Available Lengths: Y25: 31, 34, 36, 39, 42 Y05, Y15, Y25, Y26: 34, 38, 42 The bottom square becomes longer as the baluster height increases. The turned area is parallel to the rake (rise) of the stair. alusters are trimmed from the bottom (loose dowel pin). NOTE: hen the Y25 is used for a balcony application then specify Y25-36, Y25-39 & Y25-42 (turnings centered on balcony balusters). 5260 1¾ 5260 1¾ 5262 2 5241 6175 6120 Round Top and ottom locks Available 22 www.stairtrends.com

Limited Reserve ollection YRON SERIES Over the Post Euro style NEELS Euro Euro Euro VOLUTES/ TURNOUTS Euro Y74 YE74 Y75 YE75 Y78 YE78 Newels STARTING Height Turning Length ottom lock idth Y74 50 27 22 3½ YE74 50 27 22 3½ LANDING Y75 58 27 30 3½ YE75 58 27 30 3½ ANGLE (INDER) Y78 73 27 45 3½ YE78 73 27 45 3½ ottom Newels Y60 Height Turning Length YE60 ottom lock VOLUTE/TURNOUT (Adjustable) idth Y60 50 27 ADJ 3½ YE60 50 27 ADJ 3½ Y74 Y75 Y78 YE74 YE75 YE78 Options: Reeded all Top and enter all add -R Decorative Finial Post to Post EURO STYLE Finial Euro style A A Y##-R Y80 Y82 Y85 Y86 Y93 Y95 Y98 all Top Posts Height A Top lock Turning Length ottom lock idth STARTING Y80 48 5 24 15 3½ YE80 48 5 21¾ 16¾ 3½ Y82 58 5 24 25 3½ YE82 58 5 21¾ 26¾ 3½ Y93 62 5 24 29 3½ YE93 62 5 21¾ 30¾ 3½ Y95 73 5 24 40 3½ YE95 73 5 21¾ 41¾ 3½ Y98 78 5 24 45 3½ YE98 78 5 21¾ 46¾ 3½ 2ND FLOOR LANDING Y85 58 11 19½ 23½ 3½ YE85 58 11 19¾ 22¾ 3½ INTERMEDIATE LANDING Y86 73 14½ 16 38½ 3½ YE86 73 14½ 16¾ 37¼ 3½ Y80 Y82 Y93 Y95 Y98 YE80 YE82 YE93 YE95 YE98 www.stairtrends.com 23

KINGS OURT SERIES Limited Reserve ollection Handrails 5100 5208 The new premium Limited Reserve ollection was created to suit your signature style with a combination of classic and modern designs. The King ourt Series includes shapes reminiscent of ancient Greek urns and tapered pillar-like turnings. Reeded Octagon Reeded Octagon ALUS TERS 5226 ON THE RISE K05 K05-R K05-8 K15 K15-R K15-8 Thickness (Square) 1¾ 1¾ 1¾ 1¾ 1¾ 1¾ 5310 Rounded 5400 5700 Available Lengths: 34, 38, and 42 5900 For rail specifi cations see page 52. ottom Rails 5260 The bottom square becomes longer as the baluster height increases. The turned area is parallel to the rake (rise) of the stair. alusters are trimmed from the bottom (loose dowel pin). 1¾ 5260 1¾ 5241 6175 Round Top and ottom locks Available 24 www.stairtrends.com

Limited Reserve ollection KINGS OURT SERIES Over the Post Reeded Octagon NEELS VOLUTES/ TURNOUTS K74 K75 K78 K60 Newels STARTING Height Turning Length ottom lock idth K74 48 27 20 3½ LANDING K75 58 27 30 3½ ANGLE (INDER) K78 73 27 45 3½ VOLUTE/TURNOUT (Adjustable)) K60 50 27 ADJ 3½ ottom K74 K75 K78 K74-R K75-R K78-R K74-8 K75-8 K78-8 Post to Post Reeded Octagon Finial A K80 K82 K85 K86 K93 K95 K98 all Top Posts STARTING Height A Top lock Turning Length ottom lock idth K80 48 5 24 13⅝ 3½ K82 58 5 24 23⅝ 3½ K93 62 5 24 27⅝ 3½ K95 73 5 24 38⅝ 3½ K98 78 5 24 43⅝ 3½ 2ND FLOOR LANDING K85 58 11 18 23 3½ INTERMEDIATE LANDING K86 58 14½ 23 18 3½ K80 K82 K93 K95 K98 K80-R K82-R K93-R K95-R K98-R K80-8 K82-8 K93-8 K95-8 K98-8 www.stairtrends.com 25

MALVERN SERIES Limited Reserve ollection Handrails 5100 5208 5226 The new premium Limited Reserve ollection was created to suit your signature style with a combination of classic and modern designs. The Malvern Series features a variety of some of our newest and unique milling options. Open Flute 2 Ribbon Square Open Flute 2 Ribbon Square ALUS TERS Shown straight on ON THE RISE MV05 MV05-OPEN-F MV05-2RI MV05-SQ MV15 MV15-OPEN-F MV15-2RI MV15-SQ Thickness (Square) 1¾ 2 1¾ 1¾ 1¾ 2 1¾ 1¾ Rounded 5310 5400 5700 5900 For rail specifi cations see page 52. ottom Rails 5260 Available Lengths: 34, 38, and 42 The bottom square becomes longer as the baluster height increases. The turned area is parallel to the rake (rise) of the stair. alusters are trimmed from the bottom (loose dowel pin). 1¾ 5260 1¾ 5241 6175 5262 Round Top and ottom locks Available 2 6120 26 www.stairtrends.com

Limited Reserve ollection MALVERN SERIES Over the Post Open Flute Ribbon 2 Square NEELS VOLUTES/ TURNOUTS MV74 MV75 MV78 MV60 Newels STARTING Height Turning Length ottom lock idth MV74 48 23 24 3¼ LANDING MV75 60 23 36 3¼ ANGLE (INDER) MV78 73 23 49 3¼ VOLUTE/TURNOUT (Adjustable) MV60 48 23 ADJ 3¼ ottom MV74 MV75 MV78 Shown straight on MV74-OPEN-F MV75-OPEN-F MV78-OPEN-F MV74-2RI MV75-2RI MV78-2RI MV74-SQ MV75-SQ MV78-SQ Post to Post Open Flute Ribbon 2 Square Finial A MV80 MV82 MV85 MV86 Posts STARTING Height A Top lock Turning Length ottom lock idth MV80 48 6¾ 23 14½ 3¼ MV82 54 6¾ 23 20½ 3¼ 2ND FLOOR LANDING MV85 60 10¼ 19½ 26½ 3¼ INTERMEDIATE LANDING MV86 60 13¼ 16 27 3¼ MV80 MV82 Shown straight on MV80-OPEN-F MV82-OPEN-F MV80-2RI MV82-2RI MV80-SQ MV82-SQ www.stairtrends.com 27

MERER SERIES Limited Reserve ollection Handrails 5100 5208 The new premium Limited Reserve ollection was created to suit your signature style with a combination of classic and modern designs. The Mercer Series is a sleek modern design that incorporates a decorative ball at the bottom block. 1 Twist 1 Twist ALUS TERS Options: eapple all Decorative all Ordering Example: ME05-1T-P 5226 ON THE RISE ME05 ME05-1T-P ME15 ME15-1T-P Thickness (Square) 1¾ 1¾ 1¾ 1¾ Rounded 5310 5400 5700 5900 For rail specifi cations see page 52. ottom Rails 5260 Available Lengths: 34, 38, and 42 The bottom square becomes longer as the baluster height increases. The turned area is parallel to the rake (rise) of the stair. alusters are trimmed from the bottom (loose dowel pin). 1¾ 5260 1¾ 5241 6175 Round Top and ottom locks Available 28 www.stairtrends.com

Limited Reserve ollection MERER SERIES Over the Post Twist 1 NEELS VOLUTES/ TURNOUTS ME74 ME75 ME78 ME60 Newels STARTING Height Turning Length ottom lock idth ME74 50 27 22 3½ LANDING ME75 58 27 30 3½ ANGLE (INDER) ME78 73 27 45 3½ ottom VOLUTE/TURNOUT (Adjustable) ME60 50 27 ADJ 3½ ME74 ME75 ME78 ME74-1T-P ME75-1T-P ME78-1T-P Post to Post Twist 1 Finial A ME80 ME82 ME85 ME86 ME93 ME95 ME98 all Top Posts STARTING Height A Top lock Turning Length ottom lock idth ME80 48 5 24 14⅝ 3½ ME82 58 5 24 24⅝ 3½ ME93 62 5 24 28⅝ 3½ ME95 73 5 24 39⅝ 3½ ME98 78 5 24 44⅝ 3½ 2ND FLOOR LANDING ME85 58 11 20½ 22⅛ 3½ INTERMEDIATE LANDING ME86 73 14½ 17 37⅛ 3½ ME80 ME82 ME85 ME86 ME80-1T-P ME82-1T-P ME85-1T-P ME86-1T-P www.stairtrends.com 29

OODURY SERIES Limited Reserve ollection Handrails 5100 5208 5226 The new premium Limited Reserve ollection was created to suit your signature style with a combination of classic and modern designs. The oodbury Series features non-tapered turnings with an exciting variety of milling options. 2 arley Open Twist 2 Ribbon 3 Ribbon 2 arley Open Twist 2 Ribbon 3 Ribbon ALUS TERS ON THE RISE 05 05-2AR 05- OPEN-T 05-2RI 05-3RI 15 15-2AR 15- OPEN-T Thickness (Square) 1¾ 1¾ 2 1¾ 1¾ 1¾ 1¾ 2 1¾ 1¾ 15-2RI 15-3RI Rounded 5310 5400 5700 5900 For rail specifi cations see page 52. ottom Rails 5260 Available Lengths: 34, 38, and 42 The bottom square becomes longer as the baluster height increases. The turned area is parallel to the rake (rise) of the stair. alusters are trimmed from the bottom (loose dowel pin). Round Top and ottom locks Available 1¾ 5260 1¾ 5262 2 5241 6175 6120 30 www.stairtrends.com

Limited Reserve ollection OODURY SERIES Over the Post 2 arley Open Twist 2 Ribbon 3 Ribbon NEELS VOLUTES/ TURNOUTS 74 75 78 60 Newels Height Turning Length ottom lock idth STARTING 74 50 27 22 3½ LANDING 75 58 27 30 3½ ANGLE (INDER) 78 73 27 45 3½ ottom VOLUTE/TURNOUT (Adjustable) 60 50 27 ADJ 3½ -2AR -OPEN-T -2RI -3RI Available in 3 newel lengths: 74, 75, 78 (plain shown in measurement chart) Post to Post 2 arley Open Twist 2 Ribbon 3 Ribbon Finial A 80 82 85 86 93 95 98 all Top Posts STARTING Height A Top lock Turning Length ottom lock idth 80 48 5 24 15½ 3½ 82 58 5 24 25½ 3½ 93 62 5 24 29½ 3½ 95 73 5 24 40½ 3½ 98 78 5 24 45½ 3½ 2ND FLOOR LANDING 85 58 11 19½ 24 3½ INTERMEDIATE LANDING 86 73 14½ 16 39 3½ -2AR -OPEN-T -2RI -3RI Available in 5 post lengths: 80, 82, 93, 95, 98 (plain shown in measurement chart) www.stairtrends.com 31

LOMOND SERIES Limited Reserve ollection The Lomond Series features hourglass shaped turnings with center details. Over the Post NEELS VOLUTES/ TURNOUTS LM74 LM75 LM78 LM60 Newels STARTING Height Turning Length ottom lock idth LM74 50 27 22 3½ LM74 LM75 LM78 LANDING LM75 58 27 30 3½ ANGLE (INDER) LM78 73 27 45 3½ VOLUTE/TURNOUT (Adjustable) LM60 50 27 ADJ 3½ ottom LM05 Thickness 1¾ Available Lengths 34, 38, and 42 Post to Post Finial Rounded A LM80 LM82 LM85 LM86 LM93 LM95 LM98 all Top Posts STARTING Height A Top lock Turning Length ottom lock idth LM80 48 5 24 16 3½ LM82 58 5 24 26 3½ LM93 62 5 24 30 3½ LM95 73 5 24 41 3½ LM80 LM82 LM93 LM95 LM98 LM85 LM86 LM98 78 5 24 46 3½ 2ND FLOOR LANDING LM85 58 11 19½ 24½ 3½ INTERMEDIATE LANDING For rail selection and specifi cations see page 52. LM86 73 14½ 16 39½ 3½ Round Top and ottom locks Available 32 www.stairtrends.com

Limited Reserve ollection SUSSEX SERIES The Sussex Series features clean and modern non-tapered turnings. Over the Post 1 arley 1 Ribbon VOLUTES/ TURNOUTS SS74 SS75 SS78 SS60 SS05 SS05-1AR SS05-1RI Thickness 1¾ Available Lengths 34, 38, and 42 Newels STARTING Height Turning Length ottom lock idth SS74 50 27 22 3½ LANDING SS75 58 27 30 3½ ANGLE (INDER) SS78 73 27 45 3½ VOLUTE/TURNOUT (Adjustable) SS60 50 27 ADJ 3½ ottom -1AR -1RI Available in 3 newel lengths: SS74, SS75, SS78 (plain shown in measurement chart) Post to Post 1 arley 1 Ribbon Rounded Finial A SS80 SS82 SS85 SS86 SS93 SS95 SS98 all Top Posts STARTING Height A Top lock Turning Length ottom lock idth SS80 48 5 24 15½ 3½ SS82 58 5 24 25½ 3½ SS93 62 5 24 29½ 3½ SS95 73 5 24 40½ 3½ Round Top and ottom locks Available SS98 78 5 24 45½ 3½ 2ND FLOOR LANDING SS85 58 11 19½ 24 3½ INTERMEDIATE LANDING SS86 73 14½ 16 39 3½ -1AR -1RI Available in 5 post lengths: SS80, SS82, SS93, SS95, SS98 (plain shown in measurement chart) For rail selection and specifi cations see page 52. www.stairtrends.com 33

ALUSTER HAND ARVED SERIES Limited Reserve ollection MOD 11 Hand arved Decorative Scroll NEELS SE11 Use of easings require carpenter/ craftsman for installation. Easings do NOT match any given rail and must be feathered into a rail of your choice. TR11 N24A TL11 Sq Sq Sq N11A N11 11 N24 MOD 14 Hand arved Double Pen Nib NEEL ALUSTER Post Tops are pictured on page 36 Euro eech Models 11, 14, 15, 40 and 45 are made of fi ne European eech, a specie which offers much fl exibility for staining options. N14 14 34 www.stairtrends.com

Limited Reserve ollection HAND ARVED SERIES MOD 15 Hand arved Decorative Twine NEEL ALUSTER N15 15 MOD 40 Hand arved Enhanced Decorative Scroll NEEL SE40 N40 N40A Use of easings require carpenter/ craftsman for installation. Easings do NOT match any given rail and must be feathered into a rail of your choice. www.stairtrends.com 35

HAND ARVED SERIES Limited Reserve ollection Hand arved Newel aps MOD 45 Hand arved Enhanced Swan PT680A PT680 NEELS PT690A N45 PT690 MOD 99 Hand arved Decorative Posts and alusters Available in Hard Maple, Oak and herry. Top lock 5 Top lock 3½ PT700A 7¾ Top lock 2¾ 9 Top lock 1¾ 7½ 7½ PT700 52 24 50 23 38 23 38 23 PT705A 13⅜ 13 7½ 7½ PT705 ottom lock 5⅜ Sq ottom lock 3½ Sq ottom lock 3½ Sq ottom lock 2⅜ Sq NA1 NG1 A1 G1 NA2 NG2 A2 G2 Newels alusters Newels alusters 36 www.stairtrends.com

www.stairtrends.com 37

IRON ALUSTERS Iron aluster Measurment Tips StairTrends iron balusters are 44 in length with details centered 18 from the top unless noted. ut as needed from the bottom. SQUARE Most square balusters have a domed top to the baluster for easy installation into the handrail. Standard balusters are ½ x ½. 18 44 Hammered series balusters are 9/ 16 x 9 / 16. Mega Square series, page 50, are ¾ x ¾ and Venetian Round, page 49 is 5 / 8 diameter. HEIGHT EXEPTIONS alusters Series Height Page elly Posts 40 44 ollarless 41 44 M40840 40" 40 M55541 41 39 RENPANEL 42" 39 M39944 147/ 8 at scroll, 9 at base x 44 H Finishes To specify your type of fi nish, add the letter code after each item number. Flat lack (lightly textured) SAT Satin lack (smooth finish) P Grey lack AZ Antique ronze NV Nickel Verde (hand rubbed) OR Oil Rubbed opper (hand rubbed) OR Oil Rubbed ronze (hand rubbed) 38 www.stairtrends.com

IRON ALUSTERS Decorative Series More Decorative Panel designs at StairTrends.com SQUARE Detail entered 18 from Top 30 x 36 H M55541 17¾ x 41 H RENPANEL N/A in NV aluster Thickness Handrail racket Matching Accessories AZ Antique ronze (Textured) P Grey-lack (Textured) Flat lack (Lightly Textured) SAT Smooth Satin lack NV Nickel Verde (Hand Rubbed) OR Oil Rubbed opper OR Oil Rubbed ronze 3011-AZ 3012-P 3013-3016-SAT 3017-NV 3018-OR 3019-OR www.stairtrends.com 39

IRON ALUSTERS Designer alusters & Panels Designer Series is available in Flat lack Only 6 Knuckle Square 6 ME03 ME07 SQUARE 40 ME07P ME08 ircle dimension - 4 Diameter M40144 M40244 M40840 M41144 only only only only US05 4 Diameter Designer Medallion Inserts include a front and back that screw together. ME07P is a painted gold fi nish. All other designs are Flat lack. 1KNU44 2KNU44 2KNU1ASK44 Tubular* Tubular* Solid *NV fi nish is Solid aluster Thickness - The top of these balusters are square, not domed. aluster Thickness Available Finishes SAT P AZ NV OR OR Satin lack Antique Nickel Verde Oil Rubbed opper Grey lack (smooth finish) ronze (hand rubbed) (hand rubbed) Flat lack (lightly textured) Oil Rubbed ronze (hand rubbed) Knuckles For use with PLA44 Plain aluster AK01 Adjustable Knuckle 1½ x 2 AK02 Fluted arrel Adjustable Knuckle 1½ x 1½ AK03 Urn Adjustable Knuckle 1⅜ x 1⅞ AK05 Tall arrel Adjustable Knuckle 1⅜ x 2¼ AK04 Fluted Deco Adjustable Knuckle ⅞ x 6 40 www.stairtrends.com

Twist & asket Square I R O N A L U S T E R S 22 SQUARE rass detail for R101 R102 utterfly - 7 x 15¼ L 1ASK44 1T44 2ASK44 2T44 1T22 R101 R102 M34044 PLA44 Tubular* Tubular* Tubular* Tubular* Tubular* Solid Solid Solid Tubular* *NV finish is Solid only only, SAT, AZ, OR aluster Thickness - DOMED tops and SQUARE bottoms Available Finishes SAT P AZ NV OR OR Satin lack Antique Nickel Verde Oil Rubbed opper Grey lack (smooth finish) ronze (hand rubbed) (hand rubbed) Flat lack (lightly textured) Oil Rubbed ronze (hand rubbed) Iron Shoes for Square Installations IRON SHOES Page Universal Square 44 9/16 Square 45 All Round 47,48 3/4 Mega Square 49 Shoe Model Number FSH01 M06 M020 M022 SR04 PSH02 Available Finishes All All, SAT, P, AZ, P All All Shoe ase Dimensions 1½ Square 13/8 Square 17/8 Diameter 2 Square 2½ X 1½ 1¼ Square Finishes: (Flat lack), SAT (Satin lack), P (Grey lack), AZ (Antique ronze), NV (Nickel Verde), OR (Oil Rubbed opper), OR (Oil Rubbed ronze). FSH01, M06 & PSH02 are shipped in aluminum for easy installation (Finish NV excepted). All other shoes are iron. www.stairtrends.com 41

IRON ALUSTERS Scroll & Unique Square Scroll 7 x 24 L Scroll 5½ x 16 L Scroll 5½ x 22½ L Scroll 7 x 16 L Scroll 5 x 24 L Scroll 5 x 26 L Scroll 5 x 12 L Knot 3½ x 4½ L ave 1¼ x 30 L SQUARE M301 M501 M601 M321 M331 MDS MSS KNOT44 AVE44 N/A in NV N/A in P N/A in NV & AZ only aluster Thickness Available Finishes SAT P AZ NV OR OR Satin lack Antique Nickel Verde Oil Rubbed opper Grey lack (smooth finish) ronze (hand rubbed) (hand rubbed) Flat lack (lightly textured) Oil Rubbed ronze (hand rubbed) 42 www.stairtrends.com

Ribbon Square IRON ALUSTERS 10 SQUARE rass detail for R801 R802 utterfly 7 x 6½ L utterfly 7 x 6½ L 1RI44 2RI44 R801 R802 M8044 M8544 M19044 M20044 fi nish only fi nish only aluster Thickness Available Finishes SAT P AZ NV OR OR Satin lack Antique Nickel Verde Oil Rubbed opper Grey lack (smooth finish) ronze (hand rubbed) (hand rubbed) Flat lack (lightly textured) Oil Rubbed ronze (hand rubbed) Installation Products A501K Fast Setting Epoxy Kit includes 5 oz. A-7 epoxy, A-24 nozzle & piston for use with standard caulking gun (gun not included). A24 Nozzle Extra nozzle for A-501-K F120 Mixing Nozzle for F300 F101 Injector Tool for F300 adhesive. F300 Slow ure Epoxy 20-30 minute work time. 11 oz. cartridge, will install 60-80 balusters, both ends. Mixing nozzle not included order F120. www.stairtrends.com 43

IRON ALUSTERS Twist & asket Square ollarless - 41" ollarless Series is available in Flat lack Only elly Square alusters - 40" 20½ SQUARE 8 22 Details centered 20-½ from square top elly extends 5 3 /8 from bar line for easier code compliance Plain Twist asket M-1-41 M-2-41 M-3-41 M-4-41 M-5-41 PLA40-LY 1T40-LY 1ASK-LY only only only only only N/A in NV N/A in NV N/A in NV aluster Thickness - SQUARE tops and bottoms aluster Thickness - SQUARE tops and bottoms Available Finishes SAT P AZ NV OR OR Satin lack Antique Nickel Verde Oil Rubbed opper Grey lack (smooth finish) ronze (hand rubbed) (hand rubbed) Flat lack (lightly textured) Oil Rubbed ronze (hand rubbed) Universal Iron Shoes for 1/2" or 9/16" Square Installations IRON SHOES Page Square 41 9/16 Square 45 All Round 48,49 3/4 Mega Square 50 Shoe Model Number RD201 SQ301 RM020 RM201 RM301 Available Finishes All All, SAT, P,AZ All All Shoe ase Dimensions 17/8 Diameter 15/8 Square 2 Diameter 2 Diameter 2 Square Finishes: (Flat lack), SAT (Satin lack), P (Grey lack), AZ (Antique ronze), NV (Nickel Verde), OR (Oil Rubbed opper), OR (Oil Rubbed ronze) 44 www.stairtrends.com

IRON ALUSTERS Gothic Hammered rass detail for R161 9/16 SQUARE Gothic Hammered ar close-up M14344 M14044 M15044 M16044 R161 fi nish only 9/16 aluster Thickness Available Finishes SAT P AZ NV OR OR Satin lack Antique Nickel Verde Oil Rubbed opper Grey lack (smooth finish) ronze (hand rubbed) (hand rubbed) Flat lack (lightly textured) Oil Rubbed ronze (hand rubbed) Iron Shoes for 9/16" Square Installations IRON SHOES Page Square 41 Universal Square 44 All Round 48,49 3/4 Mega Square 50 Shoe Model Number H03 H06 H020 H04 H05P Available Finishes All All (Flat lack) All All Shoe ase Dimensions 1½ Square 13/8 Square 17/8 Diameter 2½ X 1½ 1¼ Square Finishes: (Flat lack), SAT (Satin lack), P (Grey lack), AZ (Antique ronze), NV (Nickel Verde), OR (Oil Rubbed opper), OR (Oil Rubbed ronze). H05P & H06 are shipped in aluminum for easy installation (Finish NV excepted). All other shoes are iron. www.stairtrends.com 45

IRON ALUSTERS Santa Fe Forged Hammered all Forged Hammered Old English Forged Hammered utterfly 7 x 6½ L Scroll 5 x 14.6 L Scroll - 5 x 14.6 L 9/16 SQUARE M9044 M10044 M11044 M12044 M13044 M305 M308 M310 M9044 M330 M13144 M13244 N/A in NV N/A in NV 9/16 aluster Thickness 9/16 aluster Thickness 9/16 aluster Thickness Available Finishes SAT P AZ NV OR OR Satin lack Antique Nickel Verde Oil Rubbed opper Grey lack (smooth finish) ronze (hand rubbed) (hand rubbed) Flat lack (lightly textured) Oil Rubbed ronze (hand rubbed) Iron Shoes see the following pages: IRON SHOES Page Square 41 Universal Square 44 9/16 Square 45 All Round 48,49 3/4 Mega Square 50 Forged Hammered ar close-up Detail of M13144 and M13244 46 www.stairtrends.com

IRON ALUSTERS Scroll Forged Hammered Tudor Forged Hammered 6 7 9/16 SQUARE Scroll 5¼ x 13½ L Scroll 5¼ x 15¼ L Scroll 5 x 26 L M13544 M30344 MHDS M13344 M13444 M13644 M13744 N/A in NV N/A in NV N/A in NV N/A in NV N/A in NV N/A in NV N/A in NV 9/16 aluster Thickness 9/16 aluster Thickness Available Finishes SAT P AZ NV OR OR Satin lack Antique Nickel Verde Oil Rubbed opper Grey lack (smooth finish) ronze (hand rubbed) (hand rubbed) Flat lack (lightly textured) Oil Rubbed ronze (hand rubbed) Detail of M13344 decorative diamond window Detail of M13644 decorative oval window www.stairtrends.com 47

IRON ALUSTERS Roman Round Arrow Round Arrow Round Series is available in Flat lack Only Round balusters have round tops and bottoms. ROUND 9/16 ROUND 4 Detail of Decorative enter Detail of Decorative enter Scroll 7 x 6½ L Scroll 7 x 15¼ L R60044 R60144 R60244 R61144 R61244 N/A in NV N/A in NV N/A in NV N/A in NV N/A in NV aluster Thickness (Textured) R20044 R21044 R22044 R22544 only only only only 9/16 aluster Thickness Available Finishes SAT P AZ NV OR OR Satin lack Antique Nickel Verde Oil Rubbed opper Grey lack (smooth finish) ronze (hand rubbed) (hand rubbed) Flat lack (lightly textured) Oil Rubbed ronze (hand rubbed) Iron Shoes for 1/2" & 9/16" Round Installations Flat Square Shoe Pitched Shoe For round balusters R08F R09P For 9/16 round balusters R07F R06P Shoe ase Dimensions 1½ Square 1¼ Square Finishes: shoe: All finishes - except NV 9/16 shoe: only 48 www.stairtrends.com

Gothic Round Available in Flat lack Only Venetian Fluted Fluted IRON ALUSTERS Matching Iron Newels 7 22 12 9/16 ROUND 5/8 ROUND IRON NEELS R54344 R54044 R55044 only only only 9/16 aluster Thickness R-65044 R-65244 R-65644 R-65844 N/A in NV N/A in NV N/A in NV N/A in NV 5/8 Round NEL- NEL- NEL- NEL- 140GOTHI ASK48 RI48 T48 1-3/16 Thick x 48 Long including 1 Top Available Finishes SAT P AZ NV OR OR Satin lack Antique Nickel Verde Oil Rubbed opper Grey lack (smooth finish) ronze (hand rubbed) (hand rubbed) Flat lack (lightly textured) Oil Rubbed ronze (hand rubbed) Venetian Detail of Venetion R65044 decorative center R10 Flat Round Shoe designed for Venetian style 2 diameter (pitched shoe not available) N101 Newel Anchoring System w/shoe Iron Newel Anchoring System Available in 7 fi nishes: Satin lack (S) Flat lack () Antique ronze (AZ) Grey-lack (P) Oil-Rub opper (OR) Nickel Verde (NV) Oil Rub ronze (OR) www.stairtrends.com 49

IRON ALUSTERS ¾" MEGA Square alusters All MEGA balusters are rounded to 9/16 diameter on top for easy installation into handrail hole. Scroll - 5½ x 16 L Scroll - 5½ x 24 L 3/4 SQUARE MEGA-PLA MEGA-1T MEGA-2T MEGA-1ASK MEGA-2ASK MEGA-M501 MEGA-M601 MEGA-1KNU MEGA-2KNU Tubular Tubular Tubular Tubular Tubular Tubular Tubular Tubular Tubular N/A in NV N/A in NV N/A in NV N/A in NV N/A in NV N/A in NV N/A in NV N/A in NV N/A in NV TUULAR 3/4 aluster Thickness Available Finishes SAT P AZ NV OR OR Satin lack Antique Nickel Verde Oil Rubbed opper Grey lack (smooth finish) ronze (hand rubbed) (hand rubbed) Flat lack (lightly textured) Oil Rubbed ronze (hand rubbed) MEGA Iron Shoes for 3/4" Square Installations IRON SHOES Page Square 41 Universal Square 44 9/16 Square 45 All Round 48,49 Shoe Model Number MEGA-M08 MEGA-PSH08 MEGA-FSH08 MEGA-RD208 MEGA-SQ308 Available Finishes All (except NV) All (except NV) All (except NV) All (except NV) All (except NV) Shoe ase Dimensions 1½ Square 1½ Square 1¾ Square 2 Diameter 2 Square Finishes: (Flat lack), SAT (Satin lack), P (Grey lack), AZ (Antique ronze), NV (Nickel Verde), OR (Oil Rubbed opper), OR (Oil Rubbed ronze) 50 www.stairtrends.com

IRON ALUSTERS 9/16 ROUND 5/8 ROUND IRON NEELS www.stairtrends.com 51

HANDRAILS 2¼ 2¼ 2 7 / 8 1 7 / 8 2 3 / 8 2¼ 5000 Available Plowed for 1¼ 5100 Available Plowed for 1¼ or 1¾ 5200 Available Plowed for 1¼ 2 3 / 8 2 5 / 8 3 2 5 / 8 2 3 / 8 2 3 / 8 5208 Available Plowed for 1¾ 5226 Available Plowed for 1¾ or 2 5310 Available Plowed for 1¾ 2 5 / 8 2 5 / 8 2 5 / 8 2 11 / 16 2¼ 2 3 / 8 2 1 / 8 2 5 / 8 5400 Available Plowed for 1¾ or 2 5500 Available Plowed for 1¼ 5700 Available Plowed for 1¾ For ending Rail add - to rail number. See our website for bending limitations. Pre-bent rail is available for tight radius applications. ONTEMPORARY RAILS 5900 Available Plowed for 1¾ Rails idth Height 5235 1 5 /8 3½ 5255 1 5 /8 5½ 5275 1 5 /8 5½ 5285 1¼ 5¼ 6100 2¾ 1 5 /8 5235 5255 5275 5285 SHOE RAILS & FILLETS 6100 Available Plowed for 1¼ or 1¾ 5211 1¼ 5/16 5260 1¾ 5/16 6111 1¼ 5/16 5260 1¾ 5/16 2½ 5210 3 5241 2½ 6125 2½ 6175 52 www.stairtrends.com

HANDRAIL FITTINGS HANDRAIL 5000 5100 5200 5208 5226 5310 5400 5500 5700 5900 FITTING 20 21 22 28 26 23 24 25 27 29 Fittings may be ordered as plowed for square top balusters add the suffix -P to the fitting number. FITTING OPTIONS All Starting Fittings are available with a 90 up easing attached. Specify the fi tting with a -90 suffi x. Starting Easing with ap 2#00 Up Easing 90 2#04 Starting Easing no ap 2#00- Plain ap 2#06 Level Quarterturn 2#01 Opening ap 2#07 Up Easing 2#02 Returned End 2#35 Over Easing 2#03 Tandem ap 2#08 Over Easing Return End 2#03R oped End 2#38 Example: 2211-90 90 Fittings can be ordered as 135. Quarterturn with ap 2#09 Volute Left Hand 2#10 Volute Right Hand 2#11 limbing Volute limbing Volute Left Hand Right Hand only available as listed below 2210-L 2211-L 2810-L 2811-L Example: 2201-135 2209-135 Five Inch Offset Rail Right Hand 2#12 Five Inch Offset Rail Left Hand 2#13 enter to enter 2⅝ enter to enter 4½ Turnout Left Hand 2#14 Turnout Right Hand 2#15 Turnout Left Hand 2#14A Turnout Right Hand 2#15A www.stairtrends.com 53

HANDRAIL FITTINGS GOOSENEKS LH 2-Riser no ap 2#16 RH 2-Riser no ap 2#17 LH 2-Riser with ap 2#18 RH 2-Riser with ap 2#19 LH 2-Riser no ap 2#22 RH 2-Riser no ap 2#23 5½ enter to enter LH 2-Riser with ap 2#26 RH 2-Riser with ap 2#27 Straight 2-Riser with Tandem ap 2#28 LH 2-Riser no ap 2#29 RH 2-Riser no ap 2#30 Straight 2-Riser with ap 2#32 Straight 2-Riser no ap 2#34 LH 2-Riser with ap 2#91 5½ enter to enter RH 2-Riser with ap 2#92 Goosenecks can be job cut for 1-rise application. To obtain a 3 or 4 rise gooseneck fi tting for a winder application add a piece of rail to a 2-rise fi tting. 54 www.stairtrends.com

RAILS & AESSORIES ROSETTES ALL RAKETS Decorative wall brackets add elegance to open tread stairs. 2205 4½ Diameter 2205 6 Diameter 2236 2205A 2205SQ 2205RE 11½ x 8 4 7 / 16 x 6½ 4 5 / 8 Square 4 5 / 16 x 6 2237 2205 11½ x 8 1 / 8 6 x 7 3 / 8 NEEL POST TOPS PT9904 2¾ x 3 7 / 8 PT9935 3¼ x 4 7 / 8 PT9937 3 1 / 8 x 3¾ PT9938 3¼ x 4 7 / 8 PTLM 3 x 2½ PTSS 3 x 3 PT9940 2¾ x 2 3 / 8 NEEL DROP 2¾ PT9990OL 3¼ x 4½ PT9990-A 3¼ x 4¼ PTY-R 3¼ x 3¾ ALL RAILS PTME-P 3¼ x 3¾ PT 3 x 3 1¾ ND99 3¼ 5205 5203 5207 5042 2 ND399 ALL RAIL FITTINGS Quarterturn Up Easing Over Easing all Rail Fittings ross Reference hart RAIL QUARTER- UP OVER TURN EASING EASING 5203 5213 5214 5215 5207 5217 5218 5219 5042 5021 5022 5023 www.stairtrends.com 55

STARTING STEPS STARTING STEP includes Shoe and ove. Risers are ¾ x 7, total Rise 8 1/ 32 ; single ullnose treads are reversible. 6¼ Radius - use with Volutes and Turnouts Single ullnose ITEM idth of ut-out Tread Depth ullnose 6203 48 11½ 10½ 6205 60 11½ 10½ 6206 72 11½ 10½ Double ullnose ITEM idth of ut-out Tread Depth ullnoses 6256 42 11½ 21 6258 48 11½ 21 Above starting steps accommodate Volutes and Turnouts in rail profi les 5200, 5208, 5000, 5310 and with Turnouts for 5500. 7 3 /16 Radius - use with Volutes,Turnouts and limbing Volutes Single ullnose ITEM idth of ut-out Tread Depth ullnose 6303 48 11½ 12¼ 6305 60 11½ 12¼ Double ullnose ITEM idth of ut-out Tread Depth ullnoses 6356 42 11½ 24½ 6358 48 11½ 24½ Above starting steps accommodate Volutes and Turnouts in rail profi les 5100, 5400, 5226, 5700 & 5900 and with Volute for 5500. Also use these steps for all climbing volutes. 8 7 /8 Radius - use with ox Newels Single ullnose ITEM idth of ut-out Tread Depth ullnose 6263 48 11½ 12¼ 6265 60 11½ 12¼ Double ullnose ITEM idth of ut-out Tread Depth ullnoses 6281 42 11½ 24½ 6283 48 11½ 24½ 6285 60 11½ 24½ Above starting steps are for use with OX NEELS and any rail. 7 Radius - use with ox and Square Top Newels and 90 Starting Fittings Single ullnose ITEM Tread idth Tread Depth ullnose 6233 48 11½ 10½ 6433 48 14 10½ 6633 60 16 10½ Double ullnose Use 6233, 6251, 6253, 6255 with ox Newels or when using a square top newel on the 2nd riser. Use 6433, 6453, 6633 and 6653 with fi ttings that have a 90 degree up-easing attached. 6433 & 6453 are used with 5200, 5208, 5000, 5310 volutes and turnouts and 5500 & 5100 turnouts. 6633 & 6653 are used with 5100 & 5500 volutes and 5400, 5226, 5700 & 5900 with volutes and turnouts. ITEM Tread idth Tread Depth ullnoses 6251 42 11½ 21 6253 48 11½ 21 6255 60 11½ 21 6453 48 14 21 6653 48 16 21 owed Starting Steps - use with Volutes and Turnouts Single ullnose idth of ITEM ullnose ut-out 6703 48 9¾ owed Treads are 11½" and project to 14½" at center. Double ullnose idth of ITEM ullnoses ut-out 6758 48 19½ Above starting steps accommodate Volutes and Turnouts in rail profi les 5200, 5208, 5000,5310 and with Turnouts for 5500 56 www.stairtrends.com

TREADS & MOULDING TREADS: 10½, 11½, 13½ Treads are 1 1 / 16 thick. Available in Lengths: 36, 42, 48, 54, 60, 72 and Lineal. RISERS Plain Tread - Nosed inder tread blanks are available (not pictured) Mitered Return Treads Specify Right or Left Hand (RH pictured) Mitered Returns 2-Ends Specify the distance between the returns. Risers Available in ¾" x 7½" or ¾ x 8 LANDING TREADS RETURN NOSING OVE MOULDS TREAD MOULD 100 11/ 16 x 11 / 16 1 1 /32 8090-3 (3½ L) 8090-5 (5½ L) 1½ ¾ Length 8080 1 1 / 16 x 1¼ LF 1 1 / 16 x 1¼ -13 8095 5/ 8 x 13 / 16 SHOE MOULD 129 7/ 16 x 11 / 16 8077 1¼ x 1 13 / 16 ENDALE LANDING TREADS 8090-5 5¼ L 8090-6 6½ L FALSE END STARTING STEPS, TREADS & RISERS Reversible False End Starting Step 6203-2 6¼ radius 6303-2 7 3 / 16 radius False End starting steps and treads are used when carpeting the center of the stairs. Use 6203-2 or 6303-2 when using a turnout or a volute. 8079 False End Kit - Unassembledsembled False End Tread with Return (Specify LH or RH) False End Tread False Riser 8072 8071-LH 8071 RH 8076 8071-RH DIMENSIONS: Inside 5¼ x 12¾ Outside 6½ x 14 8072 DIMENSIONS: Inside 6 x 11 Outside 6 x 12¼ 8076 5¼" x 8" 8076 Installation sheet is available. www.stairtrends.com 57

INSTALLATION HARDARE ontains: 1-11 lag bolt 1 washer 1 nut 2 plugs (1 oak and 1 poplar) SURE-TITE 3008 Newel Fastening System Uses fl oor joists for support No additional framing needed Installs in as little as 10 minutes Needs no mortising or coping ill not loosen over time Exceeds stair code strength requirement. Tools Required Drill its: 3 / 8, 5 / 8, 1½ ox End rench: ¾ Newel Post Fasteners 3009 and 3019 L-rackets come with 4 super heavy-duty extruded brackets, 28 hardened screws and mitered trim. Specify 3009 for 3 newels and 3019 for 3½ newels. Available in Red Oak, Poplar, Maple and herry. Used to mount newel posts on fi nished and unfi nished fl oor surfaces. The split bolt system makes it easy for universal applications. Threadlock 3070 Newel Post Fastener Newel Kit -3004 1. Locate center of newel on fl oor. Drill 5 / 8 hole in to the fl oor a min. of 1¼ deep. 2. Install the 2 hex-nuts on to the installer bolt and lock them together leaving at least ¼ of threads exposed on the end of the bolt to receive the steel insert. Thread the steel insert on to the installer bolt until the steel insert lightly contacts the hex nuts. 3. Install the steel insert into the fl oor (min. of 1 / 8 under fi n. Floor). Remove the installer bolt. Remove the 2 hex nuts from the installer bolt and install them on to the 5 hanger bolt locking them together. 4. Drill a 5 / 16 pilot hole in the bottom of the newel. Remove hex nuts. 5. Thread the newel into the steel insert. Use construction adhesive under the newel during fi nal assembly. Keylock Newel Fastener -3005 Includes: 1 3 / 8 x 5 Lag olt 1 3 / 8 x 1 7 / 8 x 2 5 / 8 Steel Inlet Plate 4 #10 x 3¾ ood Screws aluster Fasteners 2½ x 5 / 16 Dowel Screw Steel Insert 3076 Dowel Screws in quantity of 50 DS2501 Individual Dowel Screw 3033 Drill Driver for Dowel Screws uttons & Plugs 6403 3 / 8 utton 6404 ½ utton 6410 1 utton 6803 3 / 8 Flat Head Plug 6804 ½ Flat Head Plug 6810 1 Flat Head Plug 6811 1½ Flat Head Plug Installer olt Installer Nuts Drill Driver Tread Newel Post Hanger olt Steel Insert Tread Rail olt with 1 Plug 6805 Rail olt with washer, nut and plug 3032 Rail olt Drill Driver Rail olt Installer 92 Install Lag into Rail, Post, or Fitting. Newel Mounting Plate Fits 3 to 3½ Square Newels Trim 9006 Threads the nut onto a rail bolt with the aid of a rubber band and allows for access to the nut for tightening. 3006 Plate with Trim* and Screws SNMP4 Plate only with screws 9006 Trim Only 1 1 / 8 x 1 1 / 16 *Trim available in Oak, Poplar, herry, Maple Hand Rail rackets rackets are available in all popular fi nishes. HR4235 all to rail center line 2⅜. For Solid rass specify HR059. For 3½ projection specify HR312. HR601 all to rail center line 2¾. NOTE: See page 39 for powder coated brackets with a 3¼ center line. 58 www.stairtrends.com

STAIRAY TAKE-OFF NOTES StairTrends represents the fi nest in quality craftsmanship, integrity, strength and natural hardwood beauty. It is the responsibility of the purchaser to follow code regulations and install our stair products in accordance with all local or national building codes. Note: all products in this catalog are designed for interior application only. Number of Risers: Ideal riser height is 7½ and should not exceed 8 in height. The overall rise (fi nished fl oor to fi nished fl oor height) divided by the riser height will give you the number of risers (round this fi g- ure). The overall rise divided by the number of risers gives you the net riser height. Example: Overall rise of 106¾ 7½ = 14.23 number of risers. Rounding down gives you 14 risers. Net height of each riser is 106¾ 14 = 7-5/8. Tread Size: The number of treads will always be one less than the number of risers. (In our example 13 treads) The overall run (horizontal distance from fi rst riser to landing) divided by the number of treads is the tread run. The tread run plus 1 for the tread nosing is your overall tread size. Example: Overall run of 133¼. Tread run = 133¼ 13 treads = 10¼ tread run. Actual net tread size needed would be 10¼ +1 = 11¼. If you have the room you may adjust the overall run to make the tread size come out even. For stairs open on one side order mitered return treads and specify returned 1 end. hen facing the stair at the bottom of the stair a right hand (RH) open stair will be open on your right hand side. For stairs open two sides specify returned two ends. Specify the distance between the mitered returns. Stringer oard or Skirtboard: Stringer board should be ordered at 13 per tread plus any additional for extension past the fi rst and last risers. In our example 13 treads x 13 =169. Landing Tread: Use the 8090 is suitable for newels 3 thick. For thicker newels specify 8090-5 (newels wider than 4 may require a custom landing tread). Order enough lineal footage to cover your balcony and the width of each tread at every landing ove Moulding: Order lineal footage to place under landing tread and under each tread and mitered return. Handrail: heck local building codes for a graspability rule (width of handrail at the point where you would grab the handrail). hoose your handrail accordingly (most codes allow up to 2-5/8 width). Handrail lengths can be fi gured at a rate of 13 per tread plus your straight balcony. e offer lengths in 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 14, and 16 feet. Note: Some local codes require a continuous rail from the bottom of the stair to the 2nd fl oor. In applications where the fi rst few treads are open ended and the remaining treads are closed (by a wall) you may need to use fi ttings 2#12 or 2#13. all Rail: heck local building codes for wall rail requirements. all rail lengths can be fi gured at a rate of 13 per tread. all rail brackets should be placed at start and fi nish of each run with additional brackets every 2-3. All of our standard rails may be used for wall rails. alusters per Tread: Four Inch Sphere Rule. There must be no place in the balustrade where a 4 sphere can pass through. You may be required to use 3 balusters per tread to satisfy this rule. alusters: heck local building codes for balcony height (top of rail to top of fl oor). Most codes call for a minimum of 36. Some local codes require 42. For balcony runs place 4-6 on center (remember the 4 sphere rule). Subtract one baluster for each newel post (not including your 1st newel) and subtract one baluster from the total to allow for the end of the balcony. Rake handrail height is the distance from the top of the handrail to the top of the leading edge of the tread. urrent codes call for a distance between 34-38. heck your local codes. If using a 30 rake code then your baluster heights per tread will be 31 and 34 [31,34 and 36 if using three balusters]. Use our On the Level balusters for this application. aluster heights for a 34 rake code can vary depending on rise/run being used. On the Level and On the Rise balusters may be used for this application. For a 7½ rise and a 9½ run (10½ tread) the baluster heights would be 34 and 38. Volute balusters: 30-34 rake code For 1¼ balusters use 6 balusters 36 long. For 1¾ balusters use 4 balusters 36 long. Volute balusters: 34-38 rake code For 1¼ balusters use 6 balusters 42 long. For 1¾ balusters use 4 balusters 42 long. Turnouts: 30-34 rake code requires two 1¼ (one 36 and one 39 ) balusters or one 42 if using 1¼. 34-38 rake code requires two 42 1¼ balusters or one 42 if using 1¾. Newels: Newels should be placed at each point of stairway transition (this includes the starting newel, landings, balconies and each time the stairway changes direction). Use a newel when a balcony run exceeds 9 feet. Post-to-Post Newels Starting: For the 30-34 rake code newels should be approximately 43. Newels for the 34-38 rake can be 48 if surface installed or 56 under other applications. Intermediate Landing: Use the newels with a 14½ face when NOT using a landing fi tting. If using a landing fi tting you may choose a newel with a 5 face square. Landing (2nd Floor): Use the newels with a 11 face when NOT using a landing fi tting. Note if your balcony is 42 you will need to use a landing fi tting (you can use a 48 tall newel if surface mounting) inder Newels: For intermediate landings with 2-winder treads and a landing fi tting chose a 72 long newel. For intermediate landings with 3-winder treads and a landing fi tting chose a 78-84 long newel. Over-the-Post Newels Volute and Turnouts: For the 30-34 rake code use a 43 pin top newel designated for volutes or turnouts. For the 34-38 rake code use a 48 tall volute/ turnout newel. You may use a standard 43 volute newel if using a climbing volute. Starting Newel ap: For the 30-34 rake code use 43-48. For the 34-38 rake use a 48 if no starting step is used. Intermediate Landing: Use a 56 newel at the corner of an L-shaped stair. If using a landing fi tting you may choose a newel with a 5 face square Landing (2nd Floor): Use 43-48 newels. If the newel is to extend below the 2nd fl oor surface use a 56 or longer newel. inder Newels: For intermediate landings with 2-winder treads and a landing fi tting chose a 72 long newel. For intermediate landings with 3-winder treads and a landing fi tting chose a 78-84 long newel. www.stairtrends.com 59

Distributed y: 2010 Printed in U.S.A.