lumenfacade Specification Sheet Client Project name Order# Qty Type FEATURES AND BENEFITS Physical : Low copper content extruded aluminum housing Available in,, or 4 sections ft, ft or 4ft standard straight suspension stem or field adjustable aircraft cable Electro-statically applied polyester powder coat finish Machined aluminum end caps and silicone gaskets Stainless steel hardware Standard straight leader cable output, top feed Clear tempered glass Asymmetric wallwash, 0 x 0, 0 x 60, 0 x 60 or 60 x 60 optics IP66 IK07 rated (asymmetric wallwash lens is IK06 rated) Corrosion-resistant coating for hostile environments** Performance : CRI values: 85+ (700K), 80+ (000K), 78+ (4000K) Lumen maintenance 0,000 hrs [L70 @ 5 C] Lumen measurements comply with LM - 79-08 standard Resolution per foot or per (configured with LumenID V software & DMX/RDM) Operating temperatures: -5 C to 50 C [-F to F] CERTIFICADO No.05884, 05885 RETILAP Electrical : IK07* Delivered Intensity 4ft HO 4000K Output [lm] [peak cd] Line voltage luminaire for 00 to 77V Power & Data in cable (#6-5) Up to 64 feet with a single power feed (HO version, non dimming) 5W/ft version meets ASHRAE standards for linear lighting on building facades Standard 0ft /m cord 8.5W/ft (5.5W/ft HO version) Dimming options: 0-0 volt, DMX/RDM enabled, DALI, Lumentalk or Lutron EcoSystem Enabled 0ºx0º - - 0ºx60º,69 9,654 0ºx60º*,584 4,750 60ºx60º*,676,7 WW,59 5,59 *Estimated.Consult lumenpulse website for the latest ies files. 4 " [58mm] ",4 ",6 ",48 " Mounting rail [8mm, 6mm, 97mm, mm] TOP VIEW ",5 ",7 ",49 " 8 8 8 8 [40mm, 645mm, 949mm, 54mm] AIRCRAFT CABLE LENGTH IS FIELD ADJUSTABLE UP TO 00" " [89mm] FRONT VIEW SIDE VIEW Aircraft Cable Mounting 50" or 00" (field adjustable, interior applications only) *Asymmetric wallwash lens is IK06 rated. ** Use only when exposed to salt spray and harsh chemicals. This option is not required for normal outdoor exposure! /0 Copyright Lumenpulse 06 08/JN/06 75 Richardson, Suite 505 HK G6.877.97.00 P.54.97.00 F. 54.97.689 Consult
ASYMMETRIC WALLWASH OPTIC INSTALLATION DETAIL Recommended setback from wall is /0 of the wall height. Example: ft setback for a 0ft wall. FRONT VIEW RIGHT SIDE VIEW (Fixture pointing downwards) BOTTOM VIEW AIRCRAFT CABLE MOUNTING SHOWN Always position frosted side toward the wall /0 08/JN/06 Copyright Lumenpulse 06 75 Richardson, Suite 505 HK G6.877.97.00 P.54.97.00 F. 54.97.689 Consult
MOUNTING OPTIONS TOP VIEW ",4,6 " ",48 " [8mm, 6mm, 97mm, mm] ADJUSTABLE Mounting rail ", 4" or 48" [05mm, 60mm or 0mm] FRONT VIEW 8 ",5,7 8 " 8 ",49 8 " [40mm, 645mm, 949mm, 54mm] SIDE VIEW 5 6 " [58mm] " [89mm] Stem Mounting ft, ft or 4ft Lengths /0 08/JN/06 Copyright Lumenpulse 06 75 Richardson, Suite 505 HK G6.877.97.00 P.54.97.00 F. 54.97.689 Consult
LOUVER ACCESSORY INSTALLATION DETAIL Not suitable for asymmetric wallwash optic 5 6 " [4mm] 4" [0mm] FRONT VIEW Blade spacing " [5mm] 7 7 7 ", 5 ", 7 7 ", 49 " 6 6 6 6 [4mm, 646mm, 95mm,56mm] 8 " [60mm] 8 " [60mm] SIDE VIEW Blade depth 7 6 " [mm] BOTTOM VIEW LOGRD Radial Louver for Lumenfacade (See page 5 for ordering code) OPTION A - 90 o angle cord output top feed 4/0 08/JN/06 Copyright Lumenpulse 06 75 Richardson, Suite 505 HK G6.877.97.00 P.54.97.00 F. 54.97.689 Consult
ACCESSORIES Order separately Control Systems: LTO Lumentouch is a wall mount DMX 5 controller keypad. LCU Lumencue is a USB / mini SD DMX 5 controller. LID LumenID is a diagnostic and addressing DMX 5 controller. It must be specifi ed on all DMX applications. Refer to LID specifi cation sheet for details. LTN Lumentone is a simple pre-programmed DMX 5 controller with a push button rotary dial and live feedback. Control Boxes: CBX DMX/RDM control box. Up to six power and data outputs to fi xtures or fi xture runs. Ethernet enabled option. Refer to CBX specifi cation sheet for details. Radial Louver : Not suitable for asymmetric wallwash optic LOGRD - Radial louver for Lumenfacade. Louver blade depth: 7/6 [mm]; louver blade spacing: [5mm]. Please specify desired nominal length:,, or 4.. Please specify finish as BK - Black Sandtex, SI - Silver Sandtex, or WH - Smooth white (Custom color available on request, please specify as CC together with RAL color : ) 5/0 08/JN/06 Copyright Lumenpulse 06 75 Richardson, Suite 505 HK G6.877.97.00 P.54.97.00 F. 54.97.689 Consult
RESOLUTION DETAILS Applicable for DMX/RDM control option only. Fixture resolution can be configured on-site within the LumenID V software. A DMX/RDM enabled CBX is required. Resolution per foot: each foot is addressed independently DMX ADDRESSES: 4 BOTTOM VIEW LOGP 48 inches Resolution per : each is addressed independently DMX ADDRESS: BOTTOM VIEW LOGP 48 inches 6/0 08/JN/06 Copyright Lumenpulse 06 75 Richardson, Suite 505 HK G6.877.97.00 P.54.97.00 F. 54.97.689 Consult
TYPICAL WIRING DIAGRAMS Non-Dimming or Lumentalk Dimming Version American CE USE Green Yellow/Green Ground Black Brown Live 00-77V White Blue Neutral Red/Purple Black 0-0V / Data + Orange Grey 0-0V / Data - 00-77V To Maximum run length by 5A circuit: 64 linear feet of - 0 feet maximum cable length. Notes: Maximum run length calculations are typically based on 4ft s. Consult factory for specific applications. Dimming Version (0-0V) 0% minimum dimming value 0-0V previous To next Neutral white Dimmer 00-77V dimmer Maximum run length by 5A circuit: 48 linear feet of - 400 feet maximum cable length. Notes: Maximum run length calculations are typically based on 4ft s. 00-77V Data+ red Data- orange To next Consult factory for specific applications. Neutral white To 7/0 08/JN/06 Copyright Lumenpulse 06 75 Richardson, Suite 505 HK G6.877.97.00 P.54.97.00 F. 54.97.689 Consult
Open Preset Close 4 Off Specification Sheet TYPICAL WIRING DIAGRAMS - continued Dimming Version (DALI) % minimum dimming value Typical DALI Controller 00-77V American CE USE Green Yellow/Green Ground Black Brown Live 00-77V White Blue Neutral Red/Purple Black 0-0V / Data + Orange Grey 0-0V / Data - DALI Controller Maximum run length by 5A circuit: 48 linear feet of - 400 feet maximum cable length. Notes: Maximum run length calculations are typically based on 4ft s and up to 64 DALI or EcoSystem enabled s per run. Consult factory for specific applications. Each requires DALI or Lutron EcoSystem address. Dimming Version (EcoSystem )* % minimum dimming value 00-77V To Data+ red Data- orange To next Neutral white LUTRON Grafik Eye shown 00-77V Lutron EcoSystem Controller Data+ red Data- orange 00-77V To next To Neutral white *Each Lutron EcoSystem enabled has its own address; for the example shown above, there are a total of EcoSystem addresses. 8/0 08/JN/06 Copyright Lumenpulse 06 75 Richardson, Suite 505 HK G6.877.97.00 P.54.97.00 F. 54.97.689 Consult
TYPICAL WIRING DIAGRAMS - continued Star Layout (DMX/RDM) % minimum dimming value 00-77V Data input CBX - ST Lumentouch.0 #6-5 Power & data cable American CE USE Green Yellow/Green Ground Black Brown Live 00-77V White Blue Neutral Red/Purple Black 0-0V / Data + Orange Grey 0-0V / Data - 00-40V or CBX Data -- Data + To Maximum run length by 5A circuit: 64 linear feet of - 0 feet maximum cable length. Notes: Maximum run length calculations are typically based on 4ft s and up to DMX/RDM enabled s per DMX/RDM run. Consult factory for specific applications. Each requires DMX address. Neutral - white Daisy Chain Layout (DMX/RDM) % minimum dimming value or CBX Data+ red Data- orange To next Neutral white 00-77V CBX - DS #6-5 Power & data cable To Data input Lumentouch.0 00-40V 9/0 08/JN/06 Copyright Lumenpulse 06 75 Richardson, Suite 505 HK G6.877.97.00 P.54.97.00 F. 54.97.689 Consult
HOW TO ORDER LOGP 4 5 6 7 8 9 6 Housing: LOGP ASHRAE - Lumenfacade Pendant, 5W/ft ASHRAE compliant LOGP RO - Lumenfacade Pendant, Regular Output, 8.5W/ft LOGP HO - Lumenfacade Pendant, High Output, 5.5W/ft Mounting Option: (White standard finish for canopy) STEM - Stem Mounting foot STEM - Stem Mounting feet STEM4 - Stem Mounting 4 feet ACC50 - Aircraft Cable, 50" ACC00 - Aircraft Cable, 00" 7 Voltage: Finish: 4 00-00 volts 0-0 volts 08-08 volts Length: 0-0 volts 40-40 volts 77-77 volts - /8 inches (40mm) ( kg/4.5 lbs) 4-5 /8 inches (645mm) (.7 kg/7 lbs) 6-7 /8 inches (949mm) (4.75 kg/0.5 lbs) 48-49 /8 inches (54mm) (6.5 kg/4 lbs) Colors and Color temperatures: 8 BK - Black Sandtex SI - Silver Sandtex WH - Smooth white CC - Custom color and finish (please specify RAL color) Control: NO - No Dimming LT - Lumentalk Dimming 4 DIM - 0-0V Dimming option 5 DMX/RDM - DMX/RDM enabled 6 DALI - DALI Dimming option 7 ES - Lutron EcoSystem Enabled Dimming 8 7K - 700K 0K - 000K 5K- 500K 40K - 4000K RD - Red GR - Green BL - Blue 9 Option: A - 90 angle cord output, top feed CRC - Corrosion-resistant coating for hostile environments CE - CE (certification covers European Economic Area) 5 Optics: WW - Asymmetric Wallwash optic 0x0-0 x 0 0x60-0 x 60 0x60-0 x 60 60x60-60 x 60 Notes: For best results use with HO s at a 6-inch (5cm) setback from surface. Contact factory for application support. Field adjustable, interior applications only. North American RAL colors specified with RAL number only are provided with a smooth/high-gloss finish. Please consult factory for other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary. 4 % minimum dimming value. 5 0% minimum dimming value. 6 % minimum dimming value. Fixtures set to by resolution. DMX address per. 7 % minimum dimming value. DALI address per. 8 % minimum dimming value. EcoSystem address per. 0/0 08/JN/06 Copyright Lumenpulse 06 75 Richardson, Suite 505 HK G6.877.97.00 P.54.97.00 F. 54.97.689 Consult