TM LTH3MM1V Series 3mm (T-1) Through Hole Built in Resistor for 1VDC LTH3MM1VFR4700 - Yellow Water-Clear T-1 (3 mm) HIGH BRIGHTNESS COLOR OPTIONS VIEWING ANGLE 30 / 35 1 Volt MSL Applications Automotive Indoor and Outdoor Indication Industrial Appliances and Consumer Equipments Storage Servers Boats Railway Electronic Devices Residential and Landscape Lighting Infrastructure Key Features Made with AlInGaP (Yellow) Through-hole technology Integrated resistor for 1VDC operation With Flange Water-Clear Lens Bulb Size: 3mm (T-1), also available in 5mm (T-1 3/4) RoHS and REACH Compliant High-Brightness Available in 5 colors (red, green, white, blue and yellow) Viewing Angle: 30º (red, green, blue, yellow) and 35º (white) Moisture Sensitive Level (MSL): 1
Ordering Data The LTH3MM1V Series is available in a range of standard features and options. To specify your, simply choose one option from each column. Mounting Series Type Size Voltage Flange Shape Lens Color Output Color L TH 3MM 1V F R 4 Through-Hole 1V Round Top Red White Green 100 400 500 3MM 5MM* 3mm 5mm With Flange Water Clear 4 Yellow 600 700 Part Numbers LTH3MM1VFR4100 LTH3MM1VFR4400 LTH3MM1VFR4500 LTH3MM1VFR4600 LTH3MM1VFR4700 Color Red White Green Yellow *For 5mm option, please consult LTH5MM1V Series datasheet Product Dimensions 3.85 0.15 0.04 MAX 3.0 0.1 5.3 0.1 0.7 0.03 MAX 0.04 0.0 0.04 ANODE 6.0 MIN.5 0.10 Notes: 1. All dimensions are in [millimeters] inches. Tolerance is ± [] 0.01 unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice
Product Dimensions ABSOLUTE MAXIMUM RATINGS (Ta=5 C) Parameter Symbol Ratings Unit Peak Forward Current (duty 1/10 @ 1KHz) IFP 100 ma Recommended Operating Current IF(REC) 0 ma Power Dissipation PD 85 mw Reverse Voltage VR 5 V Operating Temperature Range TOPR -40~+85 C Storage Temperature Range TSTG -40~+100 C Lead Soldering Temperature Range 1.6mm (1/16 inch) from body TSOL 60 C for 5 seconds OPTICAL-ELECTRICAL CHARACTERISTICS (Ta=5 C) Parameter Symbol Test Condition Min Typ Max Unit Luminous Intensity IV 1800 500 300 mcd Peak Emission Wavelength λp 590 nm Dominant Wavelength λd 588 59 595 nm I F =1mA Forward Voltage VF 10 1 13 V Spectral Line Half-Width Δλ 18 nm Viewing Angle ϴ½ 30 deg Reverse Current IR V R =5V 10 µa 3
Product Specifications Typical Electrical-Optical Characteristic Curves Forward Current If(mA) 0 10 Forward Voltage (V) Forward Current vs. Forward Voltage Relative Luminous Intensity.0 1.5 0 8 10 1 14 16 Ambient Temperature = 5 C 10 0 30 40 50 Forward Current (ma) Luminous Intensity vs. Forward current Forward Current If(mA) Relative Luminous Intensity 50 40 30 0 10 0 Ambient Temperature ( C) Forward Current Derating Curve 1 0. 0 40 60 80 100 0.1-0 0 10 30 50 70 Ambient Temperature ( C) Luminous Intensity vs. Ambient Temperature Relative Radiant Intensity GaN InGaN Green InGaN Green Gap Yellow GaAsp/GaP Orange Super Red GaAsp/GaP GaAIAs Bright Red Gap 0 400 450 500 550 600 650 700 750 Wavelength λ (nm) Relative Intensity vs. Wavelength 4
Application Notes 1. Storage The Storage Temperature and RH are: 5 C ~ 30 C, RH 60% or less. We suggest our customers use our products within a year. If the moisture absorbent material (silica gel) has faded away or the s exceeded the storage time, bake treat more than 4 hours at 60 C ±5 C.. Electrostatic Discharge (ESD) Static electricity or surge voltage will damage the s. Recommendations: Use a conductive wrist band or anti-electrostatic glove when handling these s. All devices, equipment and machinery must be properly grounded. Work tables, storage racks, etc. should be properly grounded. In the event of a manual working in process, make sure the devices are well protected from ESD at any time. 3. Recommended Soldering Condition Soldering heat (DIP) Soldering heat 60 C Max. 45 +_ 5 C Within 5 Sec. 100 C Max Preheat 60 Sec. Max Temperature at tip of soldering iron: 350 C Max Soldering time: 3 sec ±1 sec (once only) 5
Application Notes 4. Reflow Profile Temp 45 +_ 5 C Within 5 Sec. to rise + 5 C/sec cooling - 5 C/sec 10~150 C Preheat 60~10 Sec Time Compliances and Approvals 6