Data terminal BOS Automotive Display Digidat 6 TFT Version 02.2009 510 567 creating safety by technology! Product information Digidat 6 TFT
eurofunk Digidat 6 TFT General information With the BOS Automotive Display Digidat 6 TFT, eurofunk introduces a new data terminal for mobile deployment management. This data terminal enables the transfer of messages and information between the deployed resources and the assigned command centre. For the connection of different means of communication (analogue BOS radio units, TETRA radio units), a universal interface box is available. In addition, it is possible to implement a navigation tool in the data terminal. The navigation tool can be operated directly, or, depending on the system configuration, it can be provided remotely with target coordinates from the command centre. After confirmation of a new deployment order, there are two options to select from: Status screen with display of a route description GPS navigation with graphic display and voice navigation 1 2 3 9 10 4 5 6 7 8 Control elements 1 Display with touch function 2 Touch status buttons 3 Loudspeaker 4 Actual status 5 Status line 6 Read unread messages 7 Number of deployments 8 Deployment number 9 LED for signalising messages 10 Cursor buttons
The process-controlled 7 display with touch panel offers numerous future-oriented features: technology Radio message system - FMS Radio control - FFSK GSM GPRS UMTS (option) Radio control - TETRA - BOS digital radio Navigation - GPS (12 channels), map material including map and guide, TeleAtlas (option), voice announcements Vehicle mounting support ARAT Swivelling and tilting mechanism CE certified Connection to radio units Connection to GPRS Connection to deployment host computer Control options via data terminal: Gates, traffic lights, barriers Card slot (compact flash) Compact flash controller Integrated loudspeakers (including audio amplifier) 3 x RS 232 USP device and host controller Ethernet 10/100 Mbit Radio status application Chip card reader (option) e.g. for health insurance card, cheque cards, etc. Connection via USB or serial interface Vehicle printer (option) Applications Control: Digit entry of gate number and setting the state OPEN CLOSED Memory: Messages older than x hours are automatically erased (freely configurable) Navigation: Variable scale (zoom) Route description with voice assistance Numerous additional functions: Vehicle status information (on the road without deployment; deployment resources in house, but not ready for deployment) Information about new deployments, independent of which menu is currently displayed Easy switching between route description and navigation (routing) with graphical map display Configuration example for fire brigades and rescue services 00 Emergency call 01 Ready for deployment via radio 02 Ready for deployment in guardhouse 03 Deployment order accepted - on the way to the deployment location 04 Arrived at deployment location; limited availability 05 Deployment related speech request 06 Not ready for deployment 07 On the way to the hospital 77 Control of a garage door Housing colours of the Digidat 6 In the standard version, the frame housing comes in anthracite. Optionally, the housing colours red and blue are available. The operating front panel is designed in elegant anodised aluminium.
Module descriptions Module 1 : Status transmission Transmission of text messages (Instructions) FMS TRBOS installation stage III or TETRA Short Data Service * Display of text messages and instructions from a centre to the terminal. This information is saved on a Compact Flash Card and protected against loss in case of a power outage. The display of the messages takes place in chronological order. The following notification lights are located on the left side of the screen: Signalising a new message - Push to Talk - squelch signal. Transmission of status messages (via FMS TRBOS or TETRA Short Data Service) to the control centre. Module 2 : Status transmission Transmission of text messages as well as control functions Radio data transmission solution required or TETRA Short Data Service * Display of text messages and instructions from a centre to the terminal. This information is saved on a Compact Flash Card and protected against loss in case of a power outage. The display of the messages takes place in chronological order. The following notification lights are located on the left side of the screen: Signalising a new message - Push to Talk - squelch signal. Transmission of status messages (via FMS TRBOS or TETRA Short Data Service) to the control centre. Menu for controlling gates, traffic lights, barriers, etc. * Price on request
Module Module 3 : Status transmission Transmission of text messages as well as control functions with navigation Radio data transmission solution required or TETRA Short Data Service * Display of text messages and instructions from a centre to the terminal. This information is saved on a Compact Flash Card and protected against loss in case of a power outage. The display of the messages takes place in chronological order. The following notification lights are located on the left side of the screen: Signalising a new message Push to Talk squelch signal. Transmission of status messages (via FMS TRBOS or TETRA Short Data Service) to the control centre. Menu for controlling gates, traffic lights, barriers, etc. Navigation software package for assistance when driving to the deployment location. The entry of the destination can take place via the terminal user interface or can be transmitted remotely from the command centre into the navigation package. The driver is navigated to the destination by means of voice commands. Module 4 : Status transmission Transmission of text messages Navigation Control functions Position data transfer Radio data transmission solution required or TETRA Short Data Service * Display of text messages and instructions from a centre to the terminal. This information is saved on a Compact Flash Card and protected against loss in case of a power outage. The display of the messages takes place in chronological order. The following notification lights are located on the left side of the screen: Signalising a new message Push to Talk squelch signal. Transmission of status messages (via FMS TRBOS or TETRA Short Data Service) to the control centre. Menu for controlling gates, traffic lights, barriers, etc. Navigation software package for assistance when driving to the deployment location. The entry of the destination can take place via the terminal user interface or can be transmitted remotely from the command centre into the navigation package. The driver is navigated to the destination by means of voice commands. Transmission of the actual GPS position data to the command centre. Module 5 : Remote control of TETRA radio units This module offers the possibility of operating and controlling a radio unit outside the direct operating range. Radio unit type on request. * Price on request
Technical data Digidat 6 TFT Display : Touch screen TFT LC Display 7 in 16:9 format Resolution 480 x 234 Suitable for daylight use Brightness adjustable by integrated sensor application controlled High contrast Control panel Configurable integrated cursor buttons Integrated bicoloured LED for signalising purposes Integrated loudspeaker with amplifier unit Volume control via system control or application-dependent Reproduction of signal tones, display of navigation information Processor frequency > 500 MHz Operating system : Windows CE.net, Linux (optional) Power supply 9 V to 24 V Low power consumption ( max. 700 ma 10.5 Watt ) Power save mode for saving the on-board power supply in standby mode (0.5 Watt) Vehicle mounting by means of ARAT support Temperature range -20 C to +60 C Overheat control of the terminal with integrated temperature sensor Slot for Compact Flash Card (512 MB card included) 64 MB SDRAM ( expansion optional ) Miscellaneous interfaces Ethernet interface : 10 100 MB Digital interface : 2 x In, 1 x Out Dimensions W x H x D 250 mm x 134 mm x 63 mm Weight 1 kg Vehicle mounting support ARAT support for fixed installation as standard Optional: Easy removable support Magnetic mounting
technology UASB 2 [ Universal interface box 2 ] The universal interface box is the link between the Digidat 6 TFT and the selected transmission unit (e.g. analogue radio unit). Due to its compact dimensions, the box is easy to install in vehicles and stands out by its flexible usability and modularity. Interfaces connections for NF In Out Digital In Out External GPS GPRS modem Installation area for integrated GPS GPRS module Up to 6 x RS 232 Analogous FFSK 4L-FFSK ( 9600 Bd ) modem Power supply 9 24 V via MOLEX connector Maximum power consumption of 3 Watt Temperature range - 20 C to + 60 C Dimensions W x H x D 165 mm x 50 mm x 115 mm Weight 0,5 kg Installation possible in vehicle DIN slot Digidat 6 TFT used in a vehicle. The universal interface box of eurofunk KAPPACHER.
Austria Headquarters eurofunk Kappacher GmbH Eurofunk-Straße 1 6 5600 St. Johann Tel.: + 43 6412 6223-0 Salzburg Austria Fax: + 43 6412 6223-1119 Our locations Austria Graz Asperngasse 2 4 8020 Graz Tel.: + 43 316 57 0001-0 E-Mail: graz@eurofunk.com Linz Unionstraße 95 4020 Linz Tel.: + 43 732 68 0080-0 linz@eurofunk.com office @ eurofunk.com www.eurofunk.com Salzburg Vogelweiderstraße 29 5020 Salzburg Tel.: + 43 6 62 88 3016-0 salzburg@eurofunk.com Wien Vienna Landstraßer Hauptstr. 148/2 1030 Wien Tel.: + 43 1 718 7770-0 wien@eurofunk.com References Germany United Arab Emirates Ainring Sägewerkstraße 5 83404 Ainring Tel.: + 49 8654 4619-0 E-Mail: ainring@eurofunk.com Berlin Düppelstraße 1 14163 Berlin Tel.: + 49 30 80 5865-0 berlin@eurofunk.com Riedlingen Sebastian-Sailer-Straße 19 88499 Riedlingen Donau Tel.: + 49 7371 96 6865 Dubai Grosvenor Business Tower Sheikh Zayed Road P.O.Box 191776 Dubai Tel.: + 971 4328 9320 office@eurofunk.com Online www.eurofunk.com