With the latest technology in hand, Artsign Solar is always in the forefront of solar mounting system PV market. We offer the quality product solution and comprehensive service to meet the increasing market demands. We are now a manufacture rare in the Chinese enterprises of large professional solar mounting system. Artisign Solar is specialized in R& D and Production. Expertise is our services guide and pursuit. Always adhere to the business philosophy: Professionalism, Sincerity, Win-win situation, to provide professional and quality service. Our corporate culture: Low-carbon Life, Continuation of Hope. We will take aggressive spirit as driving force for our technology innovations, human resources development as center and scientific management as fundamental of our business concepts to constantly improve our competitiveness in this industry. Producing Simple, Flexible, Solid and Low-cost Leading solar mounting systems, Artsign Solar with our professional technical R&D team can develop various personalized and customized solutions for different customer demands.
Artsign Solar product characteristics/ advantages 1. Materials: All Artsign Solar roof mounting rails adopt Aluminum 6005-T5, with surface anodized treatment. The anodized film applied complies with National Standard GB5237-2008: to be anti-corrosive, anti-rust. 2. Easy & Efficient Installation: Components can be freely combined;; Aluminum alloy rails and unique e design Module are applicable to all kinds of any building, such as metal roof,flat concrete Roof top. http://www.dirind.com/dap/clase.php?origen=3&cla_id=165 A single wrench is enough for the fixation procedures. With different parts connected properly to suit various sites installation. With high precision, rail length accurate to millimeter, any on-site cut due to rail too long or too short is not necessary, leaving no unnecessary waste. Choose Artsign Solar mounting kits, Choose higher efficiency and lower cost. 3. International Standard: Artsign Solar mounting system complies with international standard AS/NZS1170.2-2002, keeping up with the leading technology.
4. Environment-friendly: All the raw materials adopted are recyclable and guaranteed with at least 10 years of quality warranty Artsign Solar Roof Mounting System Introduction: 1.Planning the Foot Base Position the foot bases of the front and back legs as desired. Be sure all the front legs in a line and the backs in a line, and the front and back ones are in lines accordingly. Place a rubber gasket under the foot base before you fix it to the rafter with 2pcs M6X70mm bolt. 2. Fix the front legs: Screw one 25mm M8 bolt through the mid hole of the U connector with an e module at the other side;; insert the U connector(up side down) into the foot base, then use a 70mm M8 bolt to fix the base and the connector together, tighten the nut.
Artsign Adjustable Flat Roof Mount System 3.Fix the rails to the front legs: Front legs are in a line, so are the rails. Put the e modules (open side to the rail) into the rail groove, let them a little down to perfectly lock the rails, and then tighten up the screws of the E modules. The rails will be fixed to the front legs. 4.Fix the back legs Insert the outer post of back leg into the fixed foot base, then use 2pcs M8x70mm bolts to fix them together, tighten up the nuts. Add: 7-8# Guannan Industrial Park Jimei District Xiamen China(361021) Tel: 0086 592 6266951 Fax: 0086 592 6266952
Artsign Adjustable Flat Roof Mount System 5.Fix the L connector Insert the inner post into the outer post. Adjust to a suitable height then use 2pcs M8x10 to fix the inner post with outer post 6.Fix the Artsign Rails connect together with a 50mm M8 bolt, tighten the nut. Screw another 25mm M8 bolt with an e module at the other side to connect the L connector with the rails. Insert the e module (on the L connector) into the rail groove, let it down to lock the rail then tighten its screw. The rail has been up fixed to the L connector, so to the back leg as well. Add: 7-8# Guannan Industrial Park Jimei District Xiamen China(361021) Tel: 0086 592 6266951 Fax: 0086 592 6266952
Artsign Adjustable Flat Roof Mount System 7.Fix the rails with the legs Use The e modules and the M8x25mm bolts lead to the connection of the rails and the legs. 8.Rail Connection A rail splice with two E modules and 2pcs M8x25mm bolts make the connection of two rails. Join the two rails, onto their back and the rail splice kit with the e modules and the bolts, tighten up the bolts. 9.Solar panel installation a.use the Mid- clamp to connect the solar panel together Add: 7-8# Guannan Industrial Park Jimei District Xiamen China(361021) Tel: 0086 592 6266951 Fax: 0086 592 6266952
The Mid-Clamp using " e" Module and M8x25mm bolt to fix Solar Modules b. Use the End-clamp to fix the solar panel onto the rails. The End Clamp should be different according to the different thickness of the panels. 10.Finished All the panels are fixed the rails;; make sure all the components are tighten up. 10 Years Warranty for Artsign Solar Racking Components
The installation Step for Artsign Rail with e Module Please check our easy installation step by step Product Components List Part Name: AS Rail Part No.: AS-R Material: Al6005-T5 Part Name: Rail Splice Kit Part No.: AS-RS Material: Al6005-T5 Part Name: Mid Clamp Part No.: AS-MC Material: Al6005-T5 Part Name: End Clamp Part No.: AS-EC Material: Al6005-T5
Part Name: Back Leg Part No.: AS-ABL10/15 AS-ABL15/30, AS-ABL30/60 Part Name: Front Leg Part No.: AS-AFL Material: Al 6005-T5 Material: Al 6005-T5 Part Name: Corrugated Screw Part No.: AS-CS-02 Material: Galvanised Q235 Steel Part Name: M8 Screw Part No.: AS-SS-01 Material: Stainless Steel 304