Paint Scheme Specification All dimensions used are only a guide. Paint shop to determine final dimensions during the paint scheme layout. COPYRIGHT 2016 by Scheme Designers, Inc. - These drawings and paint schemes may only be used for the aircraft shown. Drawings and specifications shall be returned to the owner after the aircraft painting is complete. Reproduction of this scheme on another aircraft requires written permission of Scheme Designers, Inc. Prepared for: January 20, 2016 Aircraft Length Used: 159.75 Fuselage length (not including pitot tube and thrust attenuator) 21 Broadway, Suite 204 Cresskill, NJ 07626, USA craig@schemedesigners.com
Final Specifications Page 1 Dupont Color Chart Green P2547 (dark green leaves and flag) Green Apple M2296 mid green leaves and tail tip) Zorch Green L0695 Brown L0043 (wood grain) Sable Brown P2323 (wood grain) Golden Yellow M1022 (beer) Shell Yellow P6205 (beer) Fire Red P7140 ( Jet Blast text) Gloss Black P2333 Titanium Effect P1219 (if using metallic for base) NOTE: All dimensions listed in this specification are in inches unless otherwise noted. Beer Glass and Foam: White and very light grays. Possibilities: Matterhorn White P6294, First Star White P6286, Gray P6206 OR White Pearl with lightened Metallic Silvers. Gold Metal Rim on beer glass: Bernard likes Green Gold Effect P6208 Possibilities: (John can make best match based on his available paints and approach) Outter Rim: Blends of Golden Yellow M1022, Shell Yellow P6205, and white or very light gray. Inner Rim: Darkened version of Shell Yellow OR Can do the rim with Gold metallic blends Final Paint Scheme Design
Final Specifications Page 2 NOTE: The design on the right side of the aircraft is the mirror image of that on the left side. Templates should be used to facilitate the layout from one side to the other. Similar dimensions apply. Right Side View
Final Specifications Page 3 1-3/8 LEFT SIDE The pilot name is applied using a paint mask in black. 3/4 RIGHT SIDE The Jet Blast Warning is applied using a paint mask in red. The registration consists of 3 high rounded digits, angled aft on both sides at 15O. The digits are dark green. 30-7/8 5-3/8 The American Flag is applied using a paint mask in dark green. LEFT SIDE RIGHT SIDE The Beer glass and foam is applied using an airbrush artist. Fuselage Graphics
Final Specifications Page 4 7-1/2 20-3/4 2-5/8 3 1 8 13-5/8 1 7-1/2 1-3/8 10-7/8 1-3/8 10-1/2 Nose
Final Specifications Page 5 6-3/4 1-1/4 4-1/4 1 4-1/8 5-1/4 The Pilot Name is parallel to the edge of the window line. Mid-Fuselage
Final Specifications Page 6 2-1/2 1-1/8 1-1/2 3-3/8 4-7/8 3/8 7-1/4 5-1/4 2-7/8 5-5/8 2-5/8 NOTE: The registration is level in the ground attitude. Rear Fuselage 1-1/4 11-5/8 10-5/8
Final Specifications Page 7 1 5/8 11-3/8 2-3/8 2-1/4 1-1/8 13-5/8 14-7/8 Tail 11-1/4
Final Specifications Page 8 Plan View
Final Specifications Page 9 Dupont Color Chart Shell Yellow P6205 ( Hail to the Ale Plane! text) OR a Gold Metallic. There is no close match from our charts. Lightened version of Titanium Effect P1219 to remain legible over Titanium base (VIRGIL GAMACHE FARMS INC.) 17 Beer: Possible blend of Shell Yellow P6205, Chrome Yellow P2353, and Brown L0043 Bear Glass and Foam: White and very light grays. Possibilities: Matterhorn White P6294, First Star White P6286, Gray P6206 OR White Pearl with lightened Metallic Silvers. 40-7/8 42-3/4 4-3/8 The textual elements are applied using a paint mask. Plan View - Graphics
Final Specifications Page 10 9-7/8 22-1/2 19-1/2 1-1/2 20-1/8 1-1/2 Plan View - Wings 9-7/8 19-1/2
Final Specifications Page 11 3-5/8 1-3/8 3-1/4 2-1/2 Horizontal Tail
Final Specifications Page 12 NOTE: The edges of the black and brown fading stripe on the lower surfaces of the wings and horizontal tail are the mirror images of that on the upper surfaces. The design is symmetrical. Similar dimensions apply. Bottom View
Final Specifications Page 13 Dupont Color Chart Shell Yellow P6205 ( Hail to the Ale Plane! text) OR a Gold Metallic. There is no close match from our charts. Lightened version of Titanium Effect P1219 to remain legible over Titanium base (VIRGIL GAMACHE FARMS INC.) Green P2547 Zorch Green L0695 Golden Yellow M1022 Yellow P2548 17 Shell Yellow P6205 44-1/8 40-7/8 4-3/8 The textual elements are applied using a paint mask. Bottom View Graphics
Final Specifications Page 14 The brown stripe is a constant 1-1/2 as it flows across the wing. It fades from brown to silver/gray moving inboard. 7-1/4 25-3/8 20-3/4 7-1/4 19-1/2 1-1/2 1-1/2 19-1/2 The roundels lie 2 from the leading edge of the ailerons. 3-1/2 The brown stripe is a constant 1-1/2 as it flows across the wing. It fades from brown to silver/gray moving inboard. Bottom View 1-1/2 1-1/2
Final Specifications Page 15 Specification Notes Dimensions: Dimensions are in inches, unless otherwise specified. When dimensions are specified with the word from, it implies the perpendicular distance from where it is measured. For example, The black stripe starts at a point 1 from the edge of the red stripe implies that the measurement to the starting point of the black stripe is measured perpendicular to the edge of the red stripe. If a vertical distance is being specified, it will be specified as below or above the element from where the measurement is being taken. For example, The black stripe starts at a point 1 below the edge of the red stripe implies that the measurement to the starting point of the black stripe is measured vertically from the red stripe. Similarly, a horizontal measurement (parallel to the ground line) will be specified as forward of or aft of a particular reference. Colors: Colors are referred to throughout the document by a shortened name. For example, an Acry Glo Black Velvet Metallic color is simply referred to as black. The reference to the actual color against the shortened name is provided on Page 1 of the specifications. If a different paint type is being used to that specified on page 1, contact directly to determine an appropriate color match in the brand of paint being used. If there is any reason to suspect an error in a color specification, either in the color name or part number, please contact Scheme Designers, Inc. immediately to verify the color specification. Paint Masks and Vinyl Decals The specifications indicate where paint masks and/or vinyl decals are required. These may be provided by, by other paint masks/vinyl decal manufacturers or made internally by the paint shop. If they are to be ordered from : Contact Craig Barnett at Scheme Designers to Order. Phone: E-mail: Craig@schemedesigners.com If they are ordered from an alternate source, or made internally: The drawings in the specifications PDF file are scalable. Extract elements to be paint masked or made into a vinyl decal, scale them to the dimensions indicated in the specifications and proceed to cut. Alternately, the overall length of the aircraft is provided on the cover page. The full drawing of the aircraft can be extracted from the PDF file, enlarged to the overall length provided, and then elements to be paint masked or made into decal can be extracted and cut. Questions/Errors While we strive to be as accurate as possible, errors may occur in specifications text or dimensions, or text may be unclear. If an error is found or suspected, or if any item in these specifications is not clearly understood, please call or e-mail Craig at immediately to resolve the issue or to obtain an explanation. Specification Notes
FLS Microjet N358BV