Scientific research is a key activity developed within the academic framework of any given University.

Similar documents
Funding and Human Resources

Studies in Big Data. Series editor Janusz Kacprzyk, Polish Academy of Sciences, Warsaw, Poland

COSMOB S MAIN REFERENCES IN KNOWLEGDE TRANSFER TECHNICAL TRAINING

Inductor Current Based Fault Diagnostic System for Four Port DC/DC Converter

Novelty Technique for Power factor Improvement by a Single phase Rectifier

CIM Series in Mathematical Sciences

Comparison of Different Modulation Strategies Applied to PMSM Drives Under Inverter Fault Conditions

by a reference vector which rotates at an angular speed of ω.

STRATEGY PREFACE

IMHA Research. In short it is addressing two questions:

Permanent Magnet Machine Can Be a Vibration Sensor for Itself M. Barański

Park s Vector Approach to detect an inter turn stator fault in a doubly fed induction machine by a neural network

OECD Innovation Strategy: Key Findings

Study of Effectiveness of Under-excitation Limiter in Dynamic Modeling of Diesel Generators

THE ACADEMIC-ENTERPRISE EXPERIENCES FRAMEWORK AS A GUIDE FOR DESIGN EDUCATION

Rosatom Approach to IPR Management in Collaborative Projects on Innovations

Internationalisation of universities Do we need strategies?

The Occurrence of Faults in Permanent Magnet Synchronous Motor Drives and its Effects on the Power Supply Quality

CAPACITIES FOR TECHNOLOGY TRANSFER

Intelligent Predictive Maintenance for Itapebi Hydro-Generator

IMPLEMENTING THE ATLANTIC INTERNATIONAL RESEARCH CENTRE (AIR CENTRE)

Frequency Converter Influence on Induction Motor Rotor Faults Detection Using Motor Current Signature Analysis Experimental Research

ETSU V/06/00187//REP; DTI Pub/URN 01/799 (for Ove Arup reference:

This document is a preview generated by EVS

Experimental Results of a Single-Phase Shunt Active Filter Prototype with Different Switching Techniques

PASS-BY NOISE TESTS BY MEANS OF CIRA ACOUSTIC ANTENNAS SYSTEM

NUNO LÍBANO MONTEIRO. Partner Head of Litigation Practice. Lisbon office. Main Practice Areas. Academic Background

Research Infrastructures and Innovation

This document is a preview generated by EVS

This document is a preview generated by EVS

Twenty years of Ibero American Science and Education Consortium (ISTEC): Past, Present and Future of a Collaborative Work

CAPACITIES. 7FRDP Specific Programme ECTRI INPUT. 14 June REPORT ECTRI number

The Role Of Public Policy In Innovation Processes Brussels - May 4 th, 2011

Four Decades of AI in Portugal. Rodrigo Ventura

International Forensic Services

Establishing a reference framework for assessing the Socio-economic impact of Research Infrastructures

MIT and Portugal in the challenges for the Planet and the Society

Key words: Active power filters, Fault tolerant, Fault, Reliability

Simulation Analysis of Three Phase & Line to Ground Fault of Induction Motor Using FFT

2010/3 Science and technology for development. The Economic and Social Council,

The IIE disseminates and promotes the scientific know-how

Project: HELIUM - Health Innovation Experimental Landscape through Policy Improvement -

Structural Funds and culture in the period Executive Summary. Instituto de Geografia e Ordenamento do Território Universidade de Lisboa

Hellenic Technology Clusters Initiative

BOOSTING THE ENERGY EFFICIENCY IN RF POWER AMPLIFIERS

Stakeholders Acting Together On the ethical impact assessment of Research and Innovation

Fast Front Transients in Transformer Connected to Gas Insulated Substations: (White+Black) Box Models and TDSF Monitoring

Marie Curie Actions FP7 and Horizon 2020

Research strategy

experience knowledge innovation

Newsl letter 3 Dec. 2009

TERMS OF REFERENCE. 30 Calendar-days = 1 person month (Average 50% in Egypt) Deputy Team Leader of Industrial Business Services at GIZ PSME Project

Addressing the Innovation Imperative

A Scientometric Analysis of Additive Manufacturing in Latin America

April 2015 newsletter. Efficient Energy Planning #3

Navigation of an Autonomous Underwater Vehicle in a Mobile Network

GUIDE TO THE ERDF REGIONAL OPERATIONAL PROGRAMME The European Regional Development Fund in Emilia-Romagna

Models for Knowledge Transfer an Intellectual Property approach. September 29, Trieste

BUSINESS PLAN CEN/TC 290 DIMENSIONAL AND GEOMETRICAL PRODUCT SPECIFICATION AND VERIFICATION EXECUTIVE SUMMARY

Implementing Agreement for Co operation in Development of the Stellarator Heliotron Concept (SH IA) Strategic Plan

VIENNA RECTIFIER FED BLDC MOTOR

Zeinab El-Sadr Ministry of Scientific Research, Egypt CAASTNet Stakeholders Meeting, Dakar Senegal 25 th April 2012

Technical Support Organization (TSO) Roles and Responsibilities

IMPLEMENTING AGREEMENT NON-NUCLEAR ENERGY SCIENTIFIC AND TECHNOLOGICAL CO-OPERATION

ITEE Journal Information Technology & Electrical Engineering

Dr. Charles Watt. Educational Advancement & Innovation

COUNCIL OF THE EUROPEAN UNION. Brussels, 9 December 2008 (16.12) (OR. fr) 16767/08 RECH 410 COMPET 550

SOFT-SWITCHING INTERLEAVED BOOST CONVERTER WITH HIGHT VOLTAGE GAIN

VALIDATION THROUGH REAL TIME SIMULATION OF A CONTROL AND PROTECTION SYSTEM APPLIED TO A RESONANT EARTHED NEUTRAL NETWORK

letter 4 Jun Editorial

icd - institute for cultural diplomacy

Feedback-loop design issues of dc-dc converters in high-power energy harvesting applications

National Institute of Technology, Tiruchirappalli: Performa for CV of Faculty/ Staff Members

This document is a preview generated by EVS

António Firmino da Costa, Fernando Luís Machado, and Patricia Ávila (editors), Portugal in the European Context, vol. II, Knowledge and Society

EDUCATION ON STANDARDS DEVELOPED BY A PUBLIC INSTITUTION OF BRAZIL TO PROMOTE COMPETITIVENESS OF INDUSTRY

Canadian Technology Accreditation Criteria (CTAC) ELECTRICAL ENGINEERING TECHNOLOGY - TECHNOLOGIST Technology Accreditation Canada (TAC)

MILAN DECLARATION Joining Forces for Investment in the Future of Europe

Adaptive Business Intelligence (ABI)

Interim Report on the Heiligendamm Process at the G8 Summit in Hokkaido Toyako 7 to 9 July 2008

INTERNATIONAL STANDARD

Process Control in Next-Generation Sewing Machines: A Project Overview

Science and Technology Park

Eduardo F. Simas Filho

Review of Loss of Excitation Protection Setting and Coordination to the Generator Capacity Curve.

Virtual Institute Laboratory of the. VisionOnline Project.

Voltage Sag Immunity Testing for Single-phase Electrical and Electronic Equipment

Diesel engines Fuel injection pumps and fuel injector low-pressure connections. Part 2: Non-threaded (push-on) connections

ARCHITECTURE AND MODEL OF DATA INTEGRATION BETWEEN MANAGEMENT SYSTEMS AND AGRICULTURAL MACHINES FOR PRECISION AGRICULTURE

Learning Lessons Abroad on Funding Research and Innovation. 29 April 2016

CVVOZE Power Laboratories (CVVOZEPowerLab)

1400 MW New Zealand HVDC Upgrade: Introducing Power Modulation Controls and Round Power Mode

UNIVERSITY OF CRAIOVA ROMANIA HABILITATION THESIS ABSTRACT

WHO workshop on monitoring health R&D financial flows

The main recommendations for the Common Strategic Framework (CSF) reflect the position paper of the Austrian Council

X International Symposium on Lightning Protection

Charles Delaunay Institute. Promoting cross-cutting synergy

Assessment of Smart Machines and Manufacturing Competence Centre (SMACC) Scientific Advisory Board Site Visit April 2018.

Fractional-slot permanent magnet synchronous generator for low voltage applications

The Enterprise Europe Network. in Hungary Zita Majoros, Consultant. Title. Sub-title. 28 th January, Kiev, Ukraine

Transcription:

Scientific research is a key activity developed within the academic framework of any given University. It is in the context of the above paragraph that this booklet is presented. It contains a brief description of UBI Research Units, covering a wide range of topics. These Units constitute the main structure conveying the scientific work implemented at UBI, supporting several graduate training programs. These comprise a significant set, ranging from 2nd cycle (MSc) up to post-doctoral and European networks, including as well the vast majority of 3rd cycle students (PhD). A clear and unequivocal commitment towards innovation and entrepreneurship guides UBI research work. The information in this booklet is therefore intended to constitute the basis for a constructive dialogue between UBI and the business community, so that both will increasingly produce common projects of mutual benefit. In other words, this brochure aims to demonstrate the abilities and potential of the scientific research carried at UBI. More specifically, our compromise is towards a responsible transfer of knowledge, supporting the gradual integration of researchers in the job market, contributing the for economic growth, namely by adhering to Centro 2020: Ofoco nos resultados (http://www.centro.portugal2020.pt/index.php/item/74- centro-2020-o-foco-nos-resultados). Paulo Moniz Vice-Reitor para a Área da Investigação 01

CISE Electromechatronic Systems Research Centre

R&D Unit Presentation The Electromechatronic Systems Research Centre (CISE) established at the University of Beira Interior (UBI) is focused on the study of electromechatronic systems, integrating into a single domain the following three main engineering areas: electrical, mechanical and electronic engineering. CISE comprises two dedicated research facilities: the Electromechatronic Systems Laboratory (LSE) of the University of Beira Interior (UBI), and the Guarda International Research Station on Renewable Energies (GIRS-RES), at the Polytechnic Institute of Guarda. LSE is equipped for simulation studies and experimental tests in some of the research areas of the electromechatronic systems domain. The research activities are complemented by GIRS-RES, which is especially dedicated to the renewable energies study. Due to the need for the installation of bulky equipment, outdoor area and proper conditions, this facility provides the required conditions. http://www.cise.ubi.pt/ Team Integrated Members António João Marques Cardoso Acácio Manuel Raposo Amaral Adérito Neto Alcaso Américo Vicente Teixeira Leite Ângela Paula Barbosa da Silva Ferreira Carlos Manuel Pereira Cabrita Davide Sérgio Baptista da Fonseca; João Manuel Milheiro Caldas Paiva Monteiro Jorge Oliveira Estima Rui António Pitarma Sabino Cunha Ferreira Natália Santos Gameiro Nuno Miguel Amaral Freire Sejir Khojet El Khil PhD Students Carlos Alberto Figueiredo Ramos Diogo Melo Bento de Matos Filipe Neto Caetano Imed Jlassi Luís Miguel Lopes Lourenço PhD Collaborators Alexandre Borges de Miranda Ana Carla Vicente Vieira Chiara Boccaletti Eunice de Fátima Fragoso Ribeiro Guettaf Abderrazak Khaled Yahia Luís Manuel Ramos de Oliveira Mohamed Sahraoui M hamed Drif 35

Objectives The general objectives of CISE scientific plan are focused on the areas of: Fault diagnosis; Fault tolerance; Reliability; Energy efficiency; Asset management; Control, design and characterization of electrical machines and power electronics. 36

Major Achievements Knowledge transfer to companies by providing services or developing technologies supported by industry contracts with companies such as Cimpor Indústria de Cimentos, S. A. - Centro de Produção de Souselas and Cimpor Indústria de Cimentos, S. A. - Centro de Produção de Alhandra, Pegop Energia Eléctrica S. A., Alstom, Olivieri Group, EPS - Pumping & Treatment System Ltd. and Amreyah Cement Company. There is also a close cooperation with electrical drives manufacturers such as Yaskawa, WEG, Reel and KSB, in order to test new products; Construction of several prototypes on different research areas: wind turbines, test benches, thermalphotovoltaic modules, power converters and electric vehicle prototypes in partnership with the Italian company Picchio SPA; Organisation of the next IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives in 2015 (the scientific reference event on monitoring and diagnostics research applied to electromechatronic systems). 37

Further Indicators CISE has two dedicated research facilities: the LSE located in UBI, and the GIRS-RES at the IPG. This collaboration between both institutions (UBI and IPG) takes maximum advantage of their available infrastructures, contributing for the regional technological development while fostering the territorial cohesion. CISE presents a wide range of real opportunities that contribute for advanced training, thanks to the available resources in three major areas, namely the CISE human resources, the resources provided by the host institution and the available physical resources. The research unit members have already a great experience in contributing to knowledge and technology transfer through the registration of patents, prototypes construction on different research areas and knowledge transfer to companies by providing services or developing technologies supported by industry contracts. This new research unit, through its international research team, has been actively contributing towards a high internationalization level by its actions and involvement in various important international scientific activities. Internationalization Periodic participation and publishing in international solid venues (mostly IEEE conferences); Strong tradition in creating research and advanced training opportunities for foreign researchers (nine researchers from Spain, Brazil, Italy, Algeria, Colombia and Tunisia in the last eight years); Coordination of standardization activities on condition monitoring and diagnostics, namely ISO/TC 108/SC 5 Advisory Group C, Advisory Group D and Working Group 10, participation in the IEEE Standards Association, as well as in several Working Groups and Balloting Committees of ISO, IEC and CEN; Involvement in COST (European Cooperation in Science and Technology) Actions in order to strengthen the cooperation and interaction between European researchers; Evaluation of research projects for the Ministero dell Istruzione, dell Università e della Ricerca (Italy) and for the National Centre for Research and Development (Poland); Involvement in the Executive Board of the IEEE Industry Applications Society; Coordination of the Fault Diagnosis and Fault Tolerance Subcommittee of the IEEE Industrial Electronics Society; Memberships of several IEEE societies (Industrial Electronics, Power Electronics, Industry Applications, Power and Energy); Coordination, participation and evaluation of European Commission-funded research projects; Coordination/participation in international industry research projects; Strong collaboration with important worldwide electric drives manufacturers.

Outputs (2008-2014) Publications: 276 papers, 70 of which published in international journals with high impact factor and indexed in the most important scientific databases, such as SCOPUS and ISI, 163 papers published in international conference proceedings (mostly IEEE conferences), 26 national journal published papers, 2 books and 15 published book chapters. Advanced training: supervision of 51 concluded MSc theses, 16 concluded PhD theses and 7 concluded post-doctoral activities. Besides, it is worth mentioning that the research team members have organized 19 conferences and seminars. Scientific Projects: 9 prototypes were designed and constructed, 3 patents were registered (1 pendant) and a pilot plant (Guarda International Research Station on Renewable Energies) was conceived and installed. Additionally, the new unit members participated and coordinated 7 institutional projects with funds from FCT, 4 national projects, 4 European commission-funded projects, 8 other international projects, and 28 industry research contracts. Relevant Publications Estima, J. O.; Cardoso, A. J. M., Efficiency Analysis of Drive Train Topologies Applied to Electric/Hybrid Vehicles, IEEE Transactions on Vehicular Technology, vol. 61, no. 3, pp. 1021-1031, March 2012. Buiatti, G. M.; Martin-Ramos, J. A.; García, C. H. R.; Amaral, A. M. R.; Cardoso, A. J. M., An Online and Noninvasive Technique for the Condition Monitoring of Capacitors in Boost Converters, IEEE Transactions on Instrumentation and Measurement, vol. 59, no. 8, pp. 2134-2143, August 2010. Oliveira, L. M. R.; Cardoso, A. J. M., A Permeance-Based Transformer Model and Its Application to Winding Interturn Arcing Fault Studies, IEEE Transactions on Power Delivery, vol. 25, no. 3, pp. 1589-1598, July 2010. Drif, M.; Cardoso, A. J. M., Discriminating the Simultaneous Occurrence of Three-Phase Induction Motor Rotor Faults and Mechanical Load Oscillations by the Instantaneous Active and Reactive Power Media Signature Analyses, IEEE Transactions on Industrial Electronics, vol. 59, no. 3, pp. 1630-1639, March 2012.