MISCELLANEOUS SLIDING DOOR We offer the BEST delivered prices on this NEW pocket door hardware of any dealer, big discounts off the MSRP prices listed here. Give us a call toll free at (888) 3062298 or email us for more information!
POCKET DOORS SANTA MONICA LARGE SET TRIM Item # Description Wt. 056, 402 412, 452 PD005.xxx.PASS Passage set with 2.5" backset lock set 470 520 PD005.xxx.PRIV Privacy set with 2.5" backset lock set 535 590 PD005.xxx.PS Passage Trim Pair pair 210 230 PD005.xxx.iPS Passage Trim half pair each PD005.xxx.KE Trim with Emergency Release (KE) each 105 115 PD005.xxx.KC Trim Cut for (KC) each PD005.xxx.KT interior Trim with Turn Knob (KT) each 140 155 Levers Interior A La Carte (continued) 5168S Minimum Door Thickness: 1.75" Sets PD005.xxx.PRIV PD005.xxx.PASS Exterior Trim PD005.xxx.KE PD005.xxx.iPS Interior Trim PD005.xxx.KT PD005.xxx.iPS N/A N/A Mortise Lock 8632.xxx 8601.xxx Designer Privacy Passage Entry Double Door Inactive Exterior Trim PD005.xxx.KE PD005.xxx.iPS PD005.xxx.KC PD005.xxx.iPS Interior Trim PD006.xxx.KT PD007.xxx.iPS PD006.xxx.KT PD005.xxx.iPS N/A N/A (1.75" door thickness*) Mortise Lock 8632.xxx 8601.xxx 8632.xxx 8603.xxx * see page 151 for pocket door cylinder table N/A 147
POCKET DOORS SANTA MONICA SMALL SET TRIM Item # Description Wt. 056, 402 412, 452 PD006.xxx.PASS Passage set with 2.5" backset lock set 430 480 PD006.xxx.PRIV Privacy set with 2.5" backset lock set 495 550 PD006.xxx.PS Passage Trim Pair Pair 170 190 PD006.xxx.iPS Passage Trim half pair Each PD006.xxx.KE Trim with Emergency Release (KE) Each 85 95 PD006.xxx.KC Trim Cut for (KC) Each PD006.xxx.KT interior Trim with Turn Knob (KT) Each 120 135 Minimum Door Thickness: 1.375" Sets PD006.xxx.PRIV PD006.xxx.PASS Exterior Trim PD006.xxx.KE PD006.xxx.iPS Interior Trim PD006.xxx.KT PD006.xxx.iPS N/A N/A Mortise Lock 8632.xxx 8601.xxx Designer Privacy Passage Entry Double Door Inactive Exterior Trim PD006.xxx.KE PD006.xxx.iPS PD006.xxx.KE PD006.xxx.iPS Interior Trim PD005.xxx.KT PD016.xxx.iPS PD007.xxx.KT PD006.xxx.iPS N/A N/A (1.75" door thickness*) Mortise Lock 8632.xxx 8601.xxx 8632.xxx 8603.xxx * see page 151 for pocket door cylinder table N/A
POCKET DOORS PALO ALTO SET TRIM Item # Description Wt. 056, 402 412, 452 PD007.xxx.PASS Passage set with 2.5" backset lock set 430 480 PD007.xxx.PRIV Privacy set with 2.5" backset lock set 495 550 PD007.xxx.PS Passage Trim Pair Pair 170 190 PD007.xxx.iPS Passage Trim half pair Each PD007.xxx.KE Trim with Emergency Release (KE) Each 85 95 PD007.xxx.KC Trim Cut for (KC) Each PD007.xxx.KT interior Trim with Turn Knob (KT) Each 120 135 Minimum Door Thickness: 1.375" Sets PD007.xxx.PRIV PD007.xxx.PASS Exterior Trim PD007.xxx.KE PD007.xxx.iPS Interior Trim PD007.xxx.KT PD007.xxx.iPS N/A N/A Mortise Lock 8632.xxx 8601.xxx Designer Privacy Passage Entry Double Door Inactive Exterior Trim PD007.xxx.KE PD007.xxx.iPS PD007.xxx.KC PD007.xxx.iPS Interior Trim PD005.xxx.KT PD007.xxx.iPS PD016.xxx.KT PD007.xxx.iPS N/A N/A (1.75" door thickness*) Mortise Lock 8632.xxx 8603.xxx 8632.xxx 8603.xxx * see page 151 for pocket door cylinder table N/A 149
POCKET DOORS BOULDER SET TRIM Item # Description Wt. 056, 402 412, 452 PD016.xxx.PASS Passage set with 2.5" backset lock set 450 500 PD016.xxx.PRIV Privacy set with 2.5" backset lock set 515 570 PD016.xxx.PS Passage Trim Pair Pair 190 210 PD016.xxx.iPS Passage Trim half pair Each PD016.xxx.KE Trim with Emergency Release (KE) Each 95 105 PD016.xxx.KC Trim Cut for (KC) Each PD016.xxx.KT interior Trim with Turn Knob (KT) Each 130 145 Minimum Door Thickness: 1.375" Sets PD016.xxx.PRIV PD016.xxx.PASS Exterior Trim PD016.xxx.KE PD016.xxx.iPS Interior Trim PD016.xxx.KT PD016.xxx.iPS N/A N/A Mortise Lock 8632.xxx 8601.xxx Designer Privacy Passage Entry Double Door Inactive Exterior Trim PD016.xxx.KE PD016.xxx.iPS PD016.xxx.KE PD016.xxx.iPS Interior Trim PD006.xxx.KT PD005.xxx.iPS PD007.xxx.KT PD016.xxx.iPS N/A N/A * see page 151 for pocket door cylinder table (1.75" door thickness*) Mortise Lock 8632.xxx 8601.xxx 8632.xxx 8603.xxx N/A
POCKET DOOR AND CYLINDERS SPECIFICATIONS Standardized heavy steel case is smooth, easy to mortise, and assures snug and solid fit in door mortise. Vital interior working parts are made of solid hot forged brass or steel for a lifetime of troublefree operation. All lock cases are constructed of heavy gauge steel (.0932.4mm) material and plated with a protective rustresistant coating to retard oxidation. FACEPLATE: Wrought brass, available in standard finishes. DEADBOLT: 8602 and 8632 locks are equipped with a (25mm) throw deadbolt with steel inserts that engage strike. Furnished in US4 and 26D finishes depending on faceplate finish. PULL: All locks are equipped with a 1.25 (32mm) throw pull. Pull is thrown by push button on lock front. Furnished in US4 and 26D finishes to match trim. TURN HUB: 8602 and 8632 locks include turn hub with.19 (5mm) hole broached on the diamond. SPACING: Center to center of Turn Hub to 1.187 (30mm). CYLINDER: Emhart mortise type with 03 keyway and two silver nickel keys. is not supplier with lock and should be ordered with suffix. added to the end of the Item #. (same price as standard C keyway cylinders) KEYING: All levels of Keying, including Construction Keying, are available. STRIKE: Wrought brass finished to match. Included with 8602 and 8632 locks only. 8603 lock is springloaded strike combined with pull (for double door applications). TEMPLATE:Provided along with install instructions with all locks. Face cutouts are subject to variation. Always review trim requirements before door preparation. Item # Description Backset 030, 031,033, 034 040,, 152 056 8601.xxx Pocker Door Pull For Passage and Dummy Functions n/a $260 $280 8602.xxx Pocker Door Lock with Pull For Privacy and Entry Functions 2.75" 290 310 8632.xxx Pocker Door Lock with Pull For Privacy and Entry Functions 2.5" 290 310 8603.xxx Pocket Door Strike with Pull For Dummy Side of Double Door n/a 290 310 Mortise Locks are NOT available in Distressed Finishes, nondistressed equivalents 402=102, 412=112, 452=152 Pocker Door Pull locks come with 7/8 fronts; all other pocket door locks comes with fronts Item # Description 031,033, 040, 152 056 (4 pin) Mortise $50 $55 Mortise 50 55 8322.xxx. 1.125" Mortise 50 55 8323.xxx. 1.25" Mortise 50 55 Mortise s are NOT available in Distressed Finishes, nondistressed equivalents 402=102, 412=112, 452=152 SINGLE CYLINDER C KEYWAY Door Thickness Trim Style Name Trim Style # Large Santa Monica (Standard mounting) Large Santa Monica (Flush mounting) Small Santa Monica (Standard mounting) Small Santa Monica (Flush mounting) 1.375" 1.5" 1.75" 2" 2.25" 2.5" PD005.75".75" PD005 PD006.75" PD006 Palo Alto PD007 Boulder PD016.0625" xxx. 001 DOUBLE CYLINDER C KEYWAY Door Thickness Trim Style Name Trim Style # Large Santa Monica (Standard mounting) Large Santa Monica (Flush mounting) Small Santa Monica (Standard mounting) Small Santa Monica (Flush mounting) 1.375" 1.5" 1.75" 2" 2.25" 2.5" PD005.75" * PD005 PD006 PD006 Palo Alto PD007 Boulder PD016 xxx.002 xxx.002 * * * *.0937 xxx.002.0937 xxx.002 151
MISCELLANEOUS Sliding Door Locks 8570 & 8575 Passage 8580 & 8585 Privacy Item # Description Door Thickness Wt. 030, 031 003 055 056 8570.xxx Passage 1.375 2.3 8575.xxx Passage 1.75 2.5 8580.xxx Privacy 1.375 2.4 8585.xxx Privacy 1.75 2.5 $400 $425 8581.xxx Patio 1.375 2.4 8586.xxx Patio 1.75 2.5 8590.xxx Entrance 1.375 2.9 8595.xxx Entrance 1.75 3.0 8591.xxx Double 1.375 3.3 460 485 8596.xxx Double 1.75 34 8571.xxx Dummy 1.375 & 1.75 2.0 45 50 8570.xxx.ADAP Knob/Lever Adaptor.15 20 25 PACKED: Includes necessary fasteners DOOR THICKNESS: Sliding Door Locks only fit 1.375 and 1.75 doors other door thickness are not available. Entry functions include cylinder. Split finishes subject to 5% list price adder. 8581 & 8586 Patio 8590 & 8595 Entrance 8571 Dummy 8591 & 8596 Double 8570.xxx.ADAP Knob/Lever Adaptor
MISCELLANEOUS Descriptions PASSAGE: Latch bolt by lever either side. PRIVACY: Latch bolt by lever either side, except when locked by turn piece inside. Furnished with Emergency Key No. 0417 for unlocking outside. PATIO: Latch bolt by lever either side, except when locked by turn piece inside. ENTRANCE: Latch bolt by lever either side, except when locked by cylinder outside or turn piece inside. Turn piece must be used for locking to prevent accidental lockouts. DOUBLE CYLINDER: Latch bolt by lever either side, except when locked by cylinder outside or cylinder inside. rings required for proper cylinder operation on 1.375 and 1.750 thick doors. IMPORTANT: For cylinder clearance, a minimum pocket width of 2.50 (54mm) is required. DUMMY: Designed to be used as pulls on the inactive leaf of double sliding doors. PACKED: Sold individually. KNOB/LEVER ADAPTOR: Designed to be used to adapt a lever or a knob to a sliding door lock. PACKED: Set contains parts to modify one side of a sliding door lock; one spindle, one rose, and installation instructions. NOTE: Lever or Knob must be purchased separately. Use a solid spindle if knob or lever is installed on both sides. Lock Mechanism CutOut 1.5 (38mm) BACKSET SPECIFICATIONS FEATURES: Sliding door locks are designed with a heavy gauge steel case for maximum strength. Component parts are made primarily of solid forged brass, accurately machined for a lifetime of smooth operation. Flush edge pull provides convenient door mobility in pocket application. Fully reversible for right and left hand doors. STEEL CASE: 0.75 2.5 5.5 (19 64 140mm) FRONT: 1 8 (25 203mm). Available in widths of 1.375 (35mm) or 1.75 (44mm), depending on thickness of door. BACKSET: 1.5 (38mm) STRIKE:.5 1.25 (13 32mm).937 (24mm) projection. CYLINDER: Standard mortise type 03 keyway and two nickel silver keys. Locks are furnished with a 1 (25mm) length cylinder unless specified otherwise. Optional keyways available; refer to Section K. PREPARATION: 2.562 (65mm) deep 5.75 (146mm) high cutout is required. NOTE: Caution should be taken when using this unit on pairs of sliding doors where security is a concern. A keyed function must be used. CutAway & Strike 153