RH Key features SPDT through PDT, 0A contacts Compact power type relays Miniature power relays with a large capacity 0A contact capacity Compact size saves space Contact SPDT PDT PDT RH Series Compact Power Relays Model Part Number Selection Blade Terminal Part Number PCB Terminal Standard RHB-U 0 RHV-U 0 With Indicator RHB-UL 0 With Check Button RHB-UC 0 With Indicator and Check Button RHB-ULC 0 Top Bracket Mounting RHB-UT 0 Coil Code (Standard Stock in bold) ACV, ACV, ACV, AC0V, AC0V, AC0V, AC0V DCV, DCV, DCV, DCV, DC0V With Diode (DC coil only) RHB-UD 0 RHV-UD 0 DCV, DCV, DCV, DCV, DC0V With Indicator and Diode (DC coil only) RHB-ULD 0 DCV, DCV, DCV, DC0V Standard RHB-U 0 RHV-U 0 With Indicator RHB-UL 0 RHV-UL 0 With Check Button RHB-UC 0 With Indicator and Check Button RHB-ULC 0 Top Bracket Mounting RHB-UT 0 ACV, ACV, ACV, AC0-0V, AC0-0V DCV, DCV, DCV, DCV, DC00-0V With Diode (DC coil only) RHB-UD 0 RHV-UD 0 DCV, DCV, DCV, DCV, DC00-0V With Indicator and Diode (DC coil only) RHB-ULD 0 RHV-ULD 0 Standard RHB-U 0 RHV-U 0 With Indicator RHB-UL 0 RHV-UL 0 With Check Button RHB-UC 0 With Indicator and Check Button RHB-ULC 0 Top Bracket Mounting RHB-UT 0 With Diode (DC coil only) RHB-UD 0 With Indicator and Diode (DC coil only) RHB-ULD 0 Standard RHB-U 0 RHV-U 0 With Indicator RHB-UL 0 RHV-UL 0 With Check Button RHB-UC 0 With Indicator and Check Button RHB-ULC 0 Top Bracket Mounting RHB-UT 0 ACV, ACV, ACV, AC0V, AC0V, AC0V, AC0V DCV, DCV, DCV, DCV, DC0V DCV, DCV, DCV, DCV, DC0V ACV, ACV, ACV, AC0V, AC0V, AC0V, AC0V DCV, DCV, DCV, DCV, DC0V With Diode (DC coil only) RHB-UD 0 RHV-UD 0 DCV, DCV, DCV, DCV, DC0V With Indicator and Diode (DC coil only) RHB-ULD 0 PCB terminal relays are designed to mount directly to a circuit board without any socket. Ordering Information When ordering, specify the Part No. and coil voltage code: (example) RHB-U AC0V Part No. Coil Code Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers Phone: 00..0 - Fax:.. - Web: www.clrwtr.com - Email: info@clrwtr.com
RH Switches & Pilot Lights Signaling Lights Sockets (for Blade Terminal Models) Relays Standard Mount Finger-safe Mount Through Panel Mount PCB Mount RHB SHB-0 SHB-OC SHB- SHB- RHB SHB-0 SHB-0C SHB- SHB- RHB SHB-0 SHB-0C SHB- SHB- RHB SHB-0 SHB-0C SHB- SHB- Hold Down Springs & Clips Appearance Item Relay Pullover Wire Spring For DIN Mount Socket RHB SYS-0F RHB SYS-0F RHB SHB-0F RHB SHB-0F For Through Panel & PCB Mount Socket SYS-F Leaf Spring (side latch) RHB, RHB, RHB, RHB SFA-0 SFA-0. mount socket comes with two horseshoe clips. Do not use unless you plan to insert pullover wire spring. Replacement horseshoe clip part number is Y-0.. Must use horseshoe clip when mounting in DIN mount socket. Replacement horseshoe clip part number is Y-0.. Two required per relay. Leaf Spring (top latch) RHB, RHB, RHB, RHB SFA-0 SFA-0 Timers Contactors AC Coil Ratings (V) Rated Current (ma) ±% at 0 C AC 0Hz AC 0Hz Coil Resistance (Ω) ±0% at 0 C SPDT PDT PDT SPDT PDT PDT SPDT PDT PDT 0 0 0 0 00 0 0 0... 00 0... 0. 0 0 0. 0.......,00,00 0-0.- 0..0-. 0....... 0,00,0 0.. 0..... 0,00,0 0-0.-..0-.,0 0.......,00,0 Operation Characteristics (against rated values at 0ºC) Max. Continuous Applied 0% Pickup 0% maximum Dropout 0% minimum Terminal Blocks DC Coil Ratings (V) Rated Current (ma) ±% at 0 C Coil Resistance (Ω) ±0% at 0 C SPDT PDT PDT SPDT PDT PDT Max. Continuous Applied Operation Characteristics (against rated values at 0ºC) Pickup Dropout 0 0 0 0 0 0 00 Circuit Breakers. 0 0 0 00. 0,0,00,00,0 00-0.-.0,0 0.,00,00,0 0% 0% maximum 0% minimum Standard coil voltages are in BOLD. Phone: 00..0 - Fax:.. - Web: www.clrwtr.com - Email: info@clrwtr.com
RH Contact Ratings Model Continuous Current Maximum Contact Capacity Allowable Contact Power Resistive Load Inductive Load (V) Rated Load Res. Load Ind. Load 0 AC 0A A SPDT 0A 0VA 0VA 00W 0W 0 AC A.A 0 DC 0A A 0 AC 0A.A 0VA 00VA PDT 0A 0 AC.A A 00W W PDT 0 DC 0A.A Note: Inductive load for the rated load cos ø = 0., L/R = ms TÜV Ratings RH RH RH RH 0V AC 0A 0A.A.A 0V DC 0A 0A 0A 0A AC: cos ø =.0, DC: L/R = 0 ms UL Ratings RH RH Resistive General Use Horsepower Rating RH RH RH RH RH RH RH RH 0V AC 0A.A.A A.A A / HP / HP 0V AC 0A 0A.A.A / HP / HP 0V DC 0A 0A A V DC 0A CSA Ratings Horsepower Resistive General Use Rating RH RH RH RH RH RH RH RH RH,, 0V AC 0A 0A.A A A A A / HP 0V AC 0A 0A 0A 0A.A.A.A / HP 0V DC 0A 0A 0A 0A A.A Socket Specifications Sockets Terminal Electrical Rating Wire Size Torque Mount Sockets Finger-safe Mount Through Panel Mount Socket PCB Mount Socket SHB-0 SHB-0 SHB-0 SHB-0 SHB-0C (Coil) M screws (contact) M. screws with captive wire clamp 0V, 0A Maximum up to #AWG RH. - in lbs -. in lbs M. screws with captive wire clamp 00V, 0A Maximum up to #AWG -. in lbs (coil) M screws (contact) M. screws with captive wire clamp, fingersafe 0V, 0A Maximum up to #AWG. - in lbs -. in lbs SHB-0C SHB-0C SHB-0C M. screws with captive wire clamp, fingersafe 00V, 0A Maximum up to #AWG -. in lbs SHB- SHB- SHB- Solder 00V, 0A SHB- SHB- PCB mount 0V, 0A SHB- SHB- PCB mount 00V, 0A SHB- Accessories Item Appearance Use with Part No. Remarks Aluminum ( meter length) End Stop Replacement Hold-Down Spring Anchor All DIN rail sockets BNDN000 DIN rail BNL. mm wide. DIN mount sockets and hold down springs. Y-0 RH The BNDN000 is designed to accommodate DIN mount sockets. Made of durable extruded aluminum, the BNDN000 measures 0. (0.mm) in height and. (mm) in width (DIN standard). Standard length is (,000mm). For use on DIN rail mount socket when using pullover wire hold down spring. pieces included with each socket. Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers Phone: 00..0 - Fax:.. - Web: www.clrwtr.com - Email: info@clrwtr.com
RH Terminal Blocks Contactors Timers Signaling Lights Switches & Pilot Lights Specifications Contact Material Silver cadmium oxide Contact Resistance 0mΩ maximum Minimum Applicable Load V DC, 0 ma; V DC, 00 ma (reference value) SPDT 0ms maximum Operating Time PDT PDT ms maximum SPDT 0ms maximum Release Time PDT PDT ms maximum SPDT AC:.VA (0Hz), VA (0Hz) DC: 0.W Power Consumption AC:.VA (0Hz),.VA (0Hz) DC: 0.W (approx.) PDT AC: VA (0Hz),.VA (0Hz) DC:.W PDT AC:.VA (0Hz), VA (0Hz) DC:.W Insulation Resistance 00MΩ minimum (00V DC megger) Between live and dead parts:,000v AC, minute SPDT Between contact and coil:,000v AC, minute Between contacts of the same pole:,000v AC, minute Dielectric Strength Between live and dead parts:,000v AC, minute Between contact and coil:,000v AC, minute PDT Between contacts of different poles:,000v AC, minute PDT Between contacts of the same pole:,000v AC, minute Operating Frequency Electrical:,00 operations/hour maximum Mechanical:,000 operations/hour maximum Vibration Resistance Damage limits: 0 to Hz, amplitude 0. mm Operating extremes: 0 to Hz, amplitude 0. mm Damage limits:,000m/s (00G) Shock Resistance Operating extremes: 00m/s (0G - SPDT, ) 00m/s (0G - PDT, PDT) Mechanical Life 0,000,000 operations minimum 00,000 operations minimum (0V AC, 0A) Electrical Life SPDT PDT 00,000 operations minimum (0V AC, 0A) PDT Operating Temperature Operating Humidity Weight (approx.) SPDT PDT PDT to +0 C (no freezing) to % RH (no condensation) SPDT: g, : g, PDT: 0g, PDT: g Note: Above values are initial values.. Measured using V DC, A voltage drop method. Measured at the rated voltage (at 0 C), excluding contact bouncing Release time of relays with diode: 0 ms maximum. Relays with indicator or diode: 000V AC, minute. For use under different temperature conditions, refer to Continuous Load Current vs. Operating Temperature Curve. The operating temperature range of relays with indicator or diode is to +0 C. Circuit Breakers Phone: 00..0 - Fax:.. - Web: www.clrwtr.com - Email: info@clrwtr.com
RH Electrical Life Curves AC Load (RH) Life ( 0,000 operations) 000 00 00 0 0 0 (RH) 000 Life ( 0,000 operations) 00 00 0 0 0 (RH/RH) 000 Life ( 0,000 operations) 00 00 0 0 0 0V AC resistive 0V AC inductive 0V AC inductive 0V AC resistive 0 0V AC resistive 0V AC inductive 0 0V AC resistive 0V AC inductive Maximum Switching Capacity (RH) 0.0.0.0 0. Characteristics (Reference Data) 0V AC resistive 0V AC inductive 0 0. DC inductive AC resistive AC inductive 0V AC resistive 0V AC inductive DC resistive 0 0 00 00 00 Load (V) DC Load (RH) Life ( 0,000 operations) 000 00 00 0 0 0 (RH) 000 Life ( 0,000 operations) 00 00 0 0 0 (RH/RH) 000 Life ( 0,000 operations) 00 00 0 0 0 (RH/RH/RH) 0.0.0.0 0. 00V DC resistive 0V DC inductive 00V DC inductive 0V DC resistive 0 00V DC resistive 00V DC inductive 0V DC resistive 0V DC inductive 0 0V DC resistive 00V DC resistive 00V DC inductive 0. 0V DC inductive 0 DC inductive AC resistive AC inductive DC resistive 0 0 00 00 00 Load (V) Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers Phone: 00..0 - Fax:.. - Web: www.clrwtr.com - Email: info@clrwtr.com
RH Switches & Pilot Lights Signaling Lights Continuous Load Current vs. Operating Temperature Curve (Basic Type, With Check Button, and Top Bracket Mounting Type) (RH) Operating Temperature ( C) 00 0 0 0 0 0 0 0 0 0 0 Note: The rated voltage is applied to the coil. AC Coil DC Coil 0 (RH) Operating Temperature ( C) 00 0 Timers Contactors Terminal Blocks Circuit Breakers 0 0 0 0 0 0 0 0 0 Note: The rated voltage is applied to the coil. DC Coil AC Coil 0 (RH/RH) Operating Temperature ( C) 00 0 0 0 0 0 0 0 0 0 0 Note: The rated voltage is applied to the coil. AC/DC Coil 0 Internal Connection (View from Bottom) Basic Type SPDT PDT PDT With Check Button 0 ( ) ( + ) Front Pushbutton Contacts can be operated by pressing the check button. With Indicator (-L type) SPDT PDT PDT Below 00V AC/DC 00V AC/DC and over ( ) ( + ) ( ) ( + ) 0 ( ) ( + ) 0 ( ) ( + ) 0 ( ) ( + ) 0 ( ) ( + ) Below V AC/ DC V AC/ DC and over ( ) ( + ) ( ) ( + ) When the relay is energized, the indicator goes on. Relay coils less than 00V DC do not contain a protection diode (except ). Relay coils below 00V use LED indicator, coils above 00V use neon lamp indicator. LED color of model is green With Diode (-D type) SPDT PDT PDT 0 0 ( ) ( + ) ( ) ( + ) ( ) ( + ) ( ) ( + ) Contains a diode to absorb the back emf generated when the coil is de-energized. The release time is slightly longer. Available for DC coil only. Diode Characteristics Reverse withstand voltage:,000v Forward current: A Phone: 00..0 - Fax:.. - Web: www.clrwtr.com - Email: info@clrwtr.com
RH With Indicator LED & Diode (-LD type) Below 00V DC 00V DC and over SPDT PDT PDT ( ) ( + ) ( ) ( + ) Dimensions (mm) Below V AC/ DC V AC/ DC and over ( ) ( + ) ( ) ( + ) Contains an LED indicator and a surge absorber, and has the same height as the basic type. LED color of model is green. RHB-U/RHB-UL/RHB-UD/RHB-ULD RHB-U/RHB-UL/RHB-UD/RHB-ULD RHB-U/RHB-UL/RHB-UD/RHB-ULD Total length from panel surface including relay socket SHB-0:. (.) max., SHB-:. (.) max. Dimensions in the ( ) include a hold-down spring.. max. ø. hole. 0.... Total length from panel surface including relay socket SHB-0:. (.) max., SHB-:. (.) max. Dimensions in the ( ) include a hold-down spring.. max. ø. hole. 0.. RHB-U/RHB-UL/RHB-UD/RHB-ULD RHB-UT RHB-UT RHB-UT. Total length from panel surface including relay socket SHB-0:. (.) max., SHB-:. (.) max.. max. ø. hole.. 0. Dimensions in the ( ) include a hold-down spring. 0. ø. hole.... max.. 0 0 0..... 0. ø. hole 0..... max.. RHB-UT ø. hole. 0 0 0 0... max.. max.......... 0... Total length from panel surface including relay socket SHB-0:. (.) max., SHB-:. (.) max. Dimensions in the ( ) include a hold-down spring.. max.. ø. hole. 0. 0. ø. hole 0... max.. 0..... Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers Phone: 00..0 - Fax:.. - Web: www.clrwtr.com - Email: info@clrwtr.com
RH Switches & Pilot Lights RHV-U/RHV-UD 0. Dimensions con t (mm) RHV-U/RHV-UL/RHV-UD Signaling Lights. max... Circuit Breakers 0... -ø holes. 0. -ø. holes... 0. 0... -ø. holes... RHV-U/RHV-UL/RHV-D -ø. holes 0 0. max.. RHV-U/RHV-UL/RHV-UD 0 0. 0. 0.. max.. 0..... 0. 0 0.. max.. -ø. holes.. 0... Standard Mount Sockets SHB-0 SHB-0 Timers. M. Terminal. -ø. Mounting Holes (or M Tapped Holes). M. Terminal. -ø. Mounting Holes (or M Tapped Holes). 0 M Terminal.. max. Contactors Terminal Blocks. max.. min.. min. max. ø. min.. max. ø. min.. 0.. max.. min.. max. ø. min. (For terminals,, and ) (For terminals and ) SHB-0. M. Terminal. -ø. Mounting Holes (or M Tapped Holes) SHB-0. M. Terminal. -ø. Mounting Holes (or M Tapped Holes). 0.. max.. min.. max. ø. min. 0. 0.. max.. min.. max. ø. min. 0 Phone: 00..0 - Fax:.. - Web: www.clrwtr.com - Email: info@clrwtr.com
RH Finger-safe Mount Sockets SHB-0C. 0 M. Terminal ø. SHB-0C. M Terminal 0 M. Terminal ø..... Through Panel Mount Socket SHB- SHB- -ø. Mounting Holes (or M Tapped Holes) Ring terminals cannot be used. -ø. Mounting Holes (or M Tapped Holes) Ring terminals cannot be used. Dimensions con t (mm) 0 SHB-0C. 0 SHB-0C. SHB- SHB- 0 M. Terminal ø. ø... When using BAA/BAP:.. -ø. Mounting Holes (or M Tapped Holes) Ring terminals cannot be used. (BAA/BAP) -ø. Mounting Holes (or M Tapped Holes) Ring type crimping terminals cannot be used. 0 Switches & Pilot Lights Signaling Lights Timers Contactors Terminal Blocks Circuit Breakers Phone: 00..0 - Fax:.. - Web: www.clrwtr.com - Email: info@clrwtr.com
RH Switches & Pilot Lights Signaling Lights PCB Mount Sockets SHB-. SHB-. 0.. (Bottom View) -ø. holes... min.* * min. when using hold-down springs. Dimensions con t (mm) SHB-. min.. -ø holes (Tolerance ±0.). SHB- 0.. (Bottom View). min.*... * min. when using hold-down springs.. 0. min. -ø. holes (Tolerance 0.) Circuit Breakers Terminal Blocks Contactors Timers 0. 0.. 0 (Bottom View)... min.* * min. when using hold-down springs... 0 0 min. -ø. holes (Tolerance 0.). 0.. 0 (Bottom View) * min. when using hold-down springs. min.*.... min.. 0 0 0 -ø. holes (Tolerance 0.) Phone: 00..0 - Fax:.. - Web: www.clrwtr.com - Email: info@clrwtr.com