RFI & EMI Components and Subsystems

RFI & EMI Components and Subsystems

In 1979 Filter Networks began manufacturing RFI and EMI components. Filter Networks was acquired in 1997 by EMI Technologies. Our mission then, as now, was simple: to design and manufacture custom products, deliver on time and within specification, all at a reasonable price. By maintaining diverse engineering and manufacturing talents, Filter Networks has been able to respond to the unique requests of our customers over a broad range of RFI and EMI components. Today, Filter Networks is in a 0,000 square foot facility located in Salisbury, MD. We continue to be a world leading manufacturer of quality RFI and EMI components and subsystems used for military, industrial, and commercial applications. With over years of design and manufacturing experience, Filter Networks is committed to providing our customers with technically advanced, high quality products, at competitive prices. Our vast experience allows us to tailor standard off-the-shelf products to meet the most demanding requirements, without the need for costly development efforts. All products offered by Filter Networks are subject to the same rigorous design, manufacturing and inspection criteria. Our manufacturing, testing, and inspections conform to the requirements of MIL-I-48A and the principles set forth in ISO-9000. Your benefit from this effort is the assurance that Filter Networks products will work correctly right out of the box. The products described in this catalog have resulted from over years of design experience with the utilization of the latest computer aided technology. In addition, all products have been analyzed by our own propriety software programs that review electrical as well as physical parameters such as realizable Q plating techniques, and environmental considerations. Filter Networks designs are developed for ease of manufacturing and flexibility as a prime criteria. This coupled with adequate inventories of raw materials and in-house control of all critical process from design through manufacturing and testing, yields deliveries that are generally quoted in days, not weeks or months. At Filter Networks, we believe that putting our trademark on the product is a commitment to you of quality, service and satisfaction. This trademark is our signature and it represents a continued tradition of unparalleled service to the RFI and EMI industry.

Contents Introduction Ordering and General Information 4 In-House Testing and Environmental Capabilities Filter Technical Information 6-9 Power Line, Power Entry Filters Tempest Line Filters 11 Cylindrical/Ceramic Filters 1 Power Entry Filters for Traffic Control 1 Surge Protectors, Lowpass, Highpass 14 and Bandpass Filters Data Line, Control Line Filters 1 RFI Filters for Fiber Optic Couplers 16 Inductors, Transformers and Chokes 17 Standard Stock Items 18-19 Copyright Filter Networks 1998

Ordering and General Information How to Order Part numbers are assigned at time of order. If you have generated a part number, give the name of the component and the frequency range as stated in the catalog. If special options or non-standard features are desired, they should be fully described and a unique part number will be assigned. Special modifications for unusual applications, custom components and adaptation of existing parts can be designed and developed by our engineering department. A qualified staff of experienced sales and design engineers is available to assist you in specifying components for your special requirements. Ordering address: Filter Networks 8 Coles Circle, Suite C Salisbury, MD 14 Phone: 4-41-0 Fax: 4-41-4900 E-mail: sales@filternetworks.com Web: http://www.filternetworks.com Our CAGE code is 8Y4 Orders may also be placed with our sales representative in your area. Determination of price, terms and conditions of sales and final acceptance of orders may only be by our staff in Salisbury, Maryland. Payment Options Filter Networks offers many convenient payment methods, including: Open Account (subject to credit approval), Mastercard/Visa, and Letters of Credit. Please specify payment method at time of order. Product Specification Published specifications are subject to change by the factory at any time. We reserve the right to discontinue items without prior notice. Delivery If a carrier is not specified at the time of order, shipment will be made by the most economical method. For rush service, we will ship by air freight, air express, air parcel post or others, as requested. Firm delivery dates are given at time of quotation. Filter Networks maintains complete inventory so that many items may be delivered within 4 hours when quoted by the factory. Packing and Packaging Packing and Packaging is normally supplied to Best Commercial standards. Packaging to military requirements, including Bar Coding is available on request. Warranty Products manufactured by Filter Networks are warrantied against defective materials and workmanship for a period of one year from the date of shipment. Filter Networks obligation for any defect shall be limited to the repair of the defective part. Filter Networks assumes no liability if defects result from improper use, operation above rated capacities, repairs not made by us, or misapplication of equipment. No other warranty is expressed or implied. Filter Networks neither makes nor authorizes any other person to make any other warranty concerning its products. Filter Networks is not liable for consequential damages. Warranty returns must first be authorized by our sales office and must be returned prepaid. 4

In-House Testing and Environmental Capabilities Test Function Immersion Seal Resistance to Solvents Solderability Resistance to Soldering Heat Terminal Strength Dielectric Withstanding Voltage Insulation Resistance DC Resistance Capacitance Inductance Quality Factor (Q) High Temperature Life Test Low Temperature Cycling Thermal Shock Multi-Component Burn-In Current Measurement Radiographic Inspection Capabilities -00 VAC 1 to 0 VDC 1 8 M Ohms 0 to 000 M Ohms 0 to 99 mf 0 to 9900 H -6 C to + C -6 C to + C DC up to Amp, VAC 0 Hz Phase 1 kw max VAC Hz Phase kw up to A rms Multiple Part -Ray Reference MIL-STD-0, 8 MIL-STD-, 88 MIL-STD-0 MIL-STD-0 MIL-STD-0 MIL-STD-0 MIL-STD-0 MIL-STD-0, 88 MIL-STD-0 MIL-STD-0 MIL-STD-0 Quality Factor (Q) MIL-STD-0, 81 MIL-STD-0, 8 MIL-STD-0 MIL-STD-0 MIL-STD-0

Filter Technical Information Cylindrical CYLINDRICAL FILTERS FOR POWER LINE APPLICATIONS MILITARY GRADE CYLINDRICAL FILTERS Filter Networks Cylindrical Filters offer superior interference suppression for AC or DC power lines. Filter Networks Cylindrical Filter designs are manufactured, inspected, and tested to meet the requirements of the military specifications MIL-F-8861 and MIL-F-17. Compact plated brass tube housings and hermetic terminal seals enable reliable operation in hostile moisture and shock/vibration environments. The use of dependable cylindrical dielectric feed through capacitors ensures dramatic broadband (0 KHz to 1 GHz) interference suppression (up to db) while withstanding line voltages as severe as 0 VAC 0 Hz at temperature extremes from - C to +1 C. By selecting from a wide range of standard capacitor values and custom wound inductors, Filter Networks can design a cylindrical filter to meet specific voltage, current, performance and environmental requirements. Standard designs are available for many existing MIL-F-17 and MIL-F-8861 slash sheet designs. Filter Networks responds to your interference requirements with state-of-the-art technology and old fashioned personal customer service. Filter Networks offers a variety of quality assurance plans for its Cylindrical Filter product line including combinations of thermal shock, burn-in, and full military Gp A, B, C testing in accordance with either MIL-F-17 or MIL-F-8861 (Class B) requirements. Filter Networks responds to your interference requirements with state-of-the-art technology and old fashioned personal customer service. Let Filter Networks application engineers discuss your needs. You ll be pleased to find The Difference is Response! 6

7

Part Number Current Rating Line-to-Line Operating Voltage ( Hz) Temperature Range Mating Connector Minimum Insertion Loss (db) Per MIL-STD-0 KHz 1 KHz 00 KHz 1 MHz MHz MHz 1 GHz NF-46 Amps VAC - to 8 C MS-6-14S-7S NF-47 Amps VAC - to 8 C MS-6-14S-7S 4 64 NF-48 Amps VAC - to 8 C MS-8-SL-S 4 NF-49 Amps VAC - to 8 C MS-6-14S-7S 4 NF-419 Amps VAC - to 8 C MS-8-SL-S 8

POWER LINE, POWER ENTRY FILTERS FOR TEMPEST APPLICATIONS Offering high-power performance in a space efficient, low cost, standard package, Filter Networks NF-46, NF-47 and NF-48 Power Line Filters are designed to meet demanding Tempest requirements for radio frequency interference suppression. These state-of-the-art Tempest filters feature a choice of connectors, lead arrangements and single/dual circuits for AC and DC applications. These Power Line Filters feature hermetically sealed MS connectors and glass sealed terminals. Each filter is required to pass MIL-STD-0 and 88 seal tests to ensure reliable performance under severe environmental conditions. Designed to operate between - C and +8 C at VAC Hz line-to-line voltages, this series of filters is available up to 0 amps current ratings. Careful consideration has been given to internal construction to ensure excellent I/O Tempest isolation and provide superior RF attenuation from 0 KHz to 1 GHz (and beyond!). One of two standard configurations may be selected to match filter-to-circuit impedance. Rugged tin-plated steel enclosures are constructed for convenient bulkhead mounting with two machine screws. These filters have been Tempest tested and approved as a RFI Power Supply-Isolator Filter for transmitter and receiver, fiber optic communication links. The engineering staff of Filter Networks have decades of experience in the filter and noise suppression field and have been producing environmental and safety products since 1979. They are pleased to present a new and high performance line of radio frequency interface filters for the Tempest Power Line requirements. Filter Networks engineering staff will be pleased to discuss your filter needs! 9

Power Line, Power Entry Filters for Tempest Applications High-power performance in a compact package Designed to meet demanding Tempest requirements for RFI suppression 0 KHz to 1 GHz (and beyond!) Part Number NF-41 NF-41 Current Rating 1 Amp Amps Operating Voltage ( Hz) /, Hz /, Hz Mating Connector MS 6-SL-S MS 6-SL-S Operating Temperatures - C to +8 C NF-49 Amps /, Hz 0 Custom steel enclosures with bulkhead mounting to suit your needs NF-1 NF-49 Amps Amps /, Hz /, Hz 0 MS 6-SL-S Available up to 0 AMPs NF-89 Amps /, Hz TEC 0 Current ratings for VAC ( Hz) line-to-line voltages New Low Leakage Higher line-to-line voltage available upon request

Tempest Line Filters Light Part Number Current Rating Operating Voltage ( Hz) Mating Connector Same form, fit and function as the standard Tempest Filter Line without the large line to ground capacitance NF-6 NF-7 NF-8 Amps Amps Amps VAC VAC VAC MS 6-14S-7S MS 6-14S-7S MS 6--SL-S Lower than. ma of AC leakage current as required by UL 18 for filters used in class 1 grounded equipment @ VAC Lower resistance for reduction of equipment (internal heating) Operating Temperatures - C to +8 C 11

Cylindrical/Ceramic Filters Dependable ceramic dielectric feed thru capacitors Outstanding interference suppression with several cut-off frequencies Cylindrical Filters for Signal Line, Power Line, EMI, RFI Filtering Compact & durable package Available with a variety of I/O Terminals & Connectors Cylindricals are available in a variety of AC/DC voltages Operating Temperatures - C to +1 C Mechanical Information.01.8 L.188 MA Diagram A THD END Diagram B.0 Internal Tooth Lockwasher Hex Nut 1/4 x 8UNF-A THD THD END Diagram C Diagram D.0 Dia Hole ( Places) Part Number Voltage 1 C Pass Band Minimum Insertion Loss (db) Per Standard MIL-STD-0 0 MHz MHz MHz 1 GHz CA-496 VDC DC-1 MHz < db CA-497 VDC DC- MHz < db 1 0 48 CA-498 VDC DC-0 MHz < db 0 1

Power Entry Filters for Traffic Control Designed for RF protection of electrical traffic signal controllers. NF-6 has been tested and certified as an approved component for protection of traffic light control systems, in major metropolitan areas. Environmentally protected custom steel enclosures. Available w/optional surge protection. NF-6 Operating Temperatures - C to +8 C 1 Volts, Hz A.C., AMP steady state Insertion Loss Measured per MIL-STD-0 in Ohm System db 0 0 0 K 00K 1M 0M M M M M Frequency (HZ.) Typical Measurements 1

Surge Protectors High end lightning strike surge protector Rated @48 VDC Custom designs to suit your surge needs SA-871 Lowpass, Highpass and Bandpass Filters In surface mount configuration Audio, communication and telemetry applications Cut-off frequencies up to 1 GHz 14

Data Line, Control Line Filters Available in a variety of line-to-line & line-to-ground Impedances (i.e. ohms) Approved for secure filter applications Hermetically sealed, custom steel housing and glass-metal compression terminals Operating Temperatures - C to +8 C Dual style DC circuits from DC to 1 GHz (and beyond) NF-619 Standard and custom designs available Impedance Insertion Loss Filter Applications Part Number Rating Line to Line Line to Ground Measured per MIL-STD-0 Ohm/ Ohm.14 MHz. MHz.7 MHz 1MHz to 1GHz Control Line Filters NF 619 NF 60 x 1A, VDC x 1A, VDC, Hz Ohm Ohm db db db db Ohm Ohm db db db db 1

RFI Filters for Fiber Optic Couplers Available in single and dual circuit configurations Low profile packaging with connectors Standard and custom designs available Mechanical Information NF-179 NF-9 NF-87 1. 1. 1. NF-4A CONN OUT CONN OUTPUT 1.0 Part Number Operating Voltage Current Rating Circuit Configuration Connector Type KHz Typical Insertion Loss (db) Per MIL-STD-0 KHz KHz 1 MHz MHz MHz 1 GHz NF-179 VDC 0 ma Single 74-9 Jack/Leads > > > > NF-9 VDC 0 ma Single 71A Jack/Leads > > > > NF-87 VDC 0 ma Single 71H Jack/ 71A Jack > > > > NF-4A 0 VAC 0 ma Dual 74-49A Jack/Leads > > > > 16

Inductors, Transformers & Chokes Applications for these products range from simple chokes, inductors and transformers used in telephone equipment to sophisticated devices for commercial and military electronics Custom designed for your application needs Wide range of customized surface mount configurations (to include): EE, EP, EFD, EI, RM, pot core and toriod Constructed of ferrites, laminations, Mpp, high flux and cut cores 17

18 NF-18 NF-17 Part Number NF- NF-4 NF-0 NF-49 NF- NF-94 NF-419 NF-41 NF-44 NF-446 NF-41 NF-4 NF-4 NF-48 NF-49 NF-46 NF-471 NF-48 NF-490 NF-491 NF-494 NF-1 NF- NF-1 NF- NF- NF-6 NF-7 NF-8 NF-9 NF- NF-1 NF-4 NF-6 NF-7 NF-8 NF- NF-48 NF-46 NF-47 Voltage Frequency Hz Amps Circuits Insertion Loss (CM/DM) 1 MHz / / / / / / / / / / / / / 0 DC DC 0 0 1 1 6 1 6 8 0 4 PH PH PH 1 Input Type MS6-14 MS6-14 MS6- MS6-14 MS6-14 MS6- MS6- MS6-16 MS6- MS6-14 MS6- MS6-14 MS6- MS6- PWR CORD MS-16 MS11-1 MS0-16 MS0-0 MS6-14 MS6-14 MS6- Term Block / / / / / / / / / / / / / / / / / / / / / / / / / 4 KHz 4 4 4 4 1/ 4 11 4 4 /0 4 4 4 9 11 4 9 64 /16 /16 /16 8/8 8 17/ Output Type Term Block AC Leakage 1 ua ma ma ma 1 ma ma.6 ma ma ma. ma.0 ma 0 ma 0 ma. ma. ma. ma.6 ma 4 ma Fuse Switch 1 KHz 1/0 64 1/7 64 / 64 64 64 /48 68/48 /48 61/6 9/1 0 00 KHz 46/44 / / / / 79/77 9 7/ 1 9/61 / / / / / / / MHz 0/64 / / / / / / / 1 GHz / / / / / MHz / / / / / /18 Standard Stock Items

19 NF-47 NF-7 Part Number NF-8 NF-67 NF-7 NF-9 NF-94 NF-99 NF-616 NF-619 NF-60 NF-68 NF-69 NF-6 NF-671 NF-67 NF-676 NF-687 NF-71 NF-77 NF-7 NF-74 NF-7 NF-76 NF-741 NF-74 NF-747 NF-748 NF-7 NF-761 NF-76 NF-76 NF-766 NF-77 NF-776 NF-7 NF-79 NF- NF-4 NF-49 NF- Voltage Frequency Hz Amps Insertion Loss (CM/DM) / / 00 / / / / 08 / DC 0 DC DC DC 0 0 0 0 1. 1.0 0 1 6 8 6. 47 1 1 6 Circuits PHD 1 1 PHD PHD PHD PHD Input Type MS6- MS-14 PWR CORD MS6-14 MS6-14 PWR CORD PWR CORD PWR CORD PWR CORD PWR CORD MS6- PWR CORD MS-0 MS6-14 MS7468-1 QUICK MS6-14 QUICK MS474-1 MS- MS6-8 / / / / /4 /4 / / / / / / / 08 / / / / / 8 / / KHz 4 4 8./1 /16 /16 64/47 0/0 /0 0/4 7/8 /0 0/18 /4 7/ / /4 Output Type MS-14S CASE QUICK QUICK QUICK QUICK MS-S AC Leakage. ma ma. ma 1.0 ma 0 ua.0 ma.0 ma 0 ma.0 ma 1. ma. ma. ma. ma. ma.0 ma. ma. ma. ma. ma ua. ma.0 ma. ma ma. ma 00 ma. ma. ma. ma 00 ma ua. ma 1.6 A Fuse Switch 1 KHz 68/48 64 0 1 14/6 64 /17 0 /48 /48 4 / /4 / /8 / / /67 / 0/8 / / / 7/4 00 KHz / 17 1 8/18 47/0 / / 9 / 48/ / 48/ / / / / 1./41 / / 90/90 /6 /0 / / 1 MHz / 0 /4 / / / / 6/ / 6/ / / / / 6/4 / / 90/90 / / MHz / / / / / / / / 90/ / / / / / / / 90/90 / / 1 GHz / / / / / / / / / / / / / / / 90/ / / MHz / 7 / / / / / / / / / 0/ / / / / / 90/ / / /16

8 Coles Circle, Suite C Salisbury, Maryland 14 4 41-0 4 41-4900 fax sales@filternetworks.com www.filternetworks.com