POWER CAGE CLAMP High-Current Terminal Blocks for Conductors up to 350 kcmil (185 mm 2 ) vibration-proof fast maintenance-free
WAGO BENEFITS Using springs instead of screws is the key to WAGO s success. The POWER CAGE CLAMP provides the appropriate clamping force for conductors up to 2, 2/0, 4/0 AWG and 350 kcmil (35, 50, 95 and 185 mm 2 ). The Latest and Largest Member of our High-Current Family Connects: For more information visit www.wago.us/sccr 1/0 to 350 kcmil 310 A Up to 1000 VAC/DC 2
Suitable for Every Application Meets the most stringent requirements, including those specified for railway and marine applications. Heat- and cold-resistant even under the heaviest of loads Always Reliable Optimum clamping force independent of operator skill 100% reliable with vibration-proof, thermal cycling resistant, gas-tight connections Fast Termination Easy to Use Side conductor entry Orange locking tab keeps the clamp open for hands-free wiring Industry s widest range of accessories to get the job done Eliminate time-consuming preparation no ring terminals or ferrules required No expensive torque wrenches or calibration required Up to 60% faster than wiring with screw terminal blocks Vibration-Proof Fast Maintenance-Free No retightening of screws wire it once and forget it 3
OUR POWER TEAM Terminate Conductors up to 350 kcmil (185 mm 2 ) with Just One Turn Grounding Green/yellow terminal blocks easily identify ground function Metal snap-on mounting foot ensures the proper ground connection without the use of screws. Continuous Marking Strip Marking Marking Tags Continuous marking strip installed with a quick swipe of the thumb Marking tags installed individually above the orange locking tab Marking carrier supplements the use of tag and strip marking Conductor Termination Rotate the operating tool counterclockwise to the stop!. Next, push in the orange locking tab for hands-free wiring. Insert a stripped conductor until it hits the backstop. Hold in this position. A short counterclockwise rotation " releases the tab. The operating tool then rotates clockwise, securely clamping the conductor. 4
Safety Protective Warning Covers Provides visual indication for high-voltage applications and prevents access to conductor clamping mechanism as well as built-in test point Finger Guards Yellow, detachable shock protectors for unused jumper slots or conductor entries Power Tap (for 2 AWG 350 kcmil) Easy to install, space saving power tap, with marking tag holder, allows for convenient power distribution to additional loads Commoning Testing For 2 AWG Convenient push-in adjacent jumper allows for easy potential commoning. Independent jumper slots allow continuous commoning beyond two terminal blocks. For 2/0, 4/0 and 350 kcmil Comb style jumper provides convenient potential commoning. Dual jumper slot allows for max rated conductor no conductor size derating required.. Via Step-Down Jumpers with TOPJOB S Push-in, step-down jumper offers easy power distribution from 2 AWG (POWER CAGE CLAMP ) to 20-4 AWG (2010-2016 Series TOPJOB S terminal blocks). Easy troubleshooting via 4 mm Ø touch-proof test plug. Use a test plug adapter (283-404) for 2 AWG terminal blocks. 5
285 SERIES 2 AWG (35 mm 2 ) 2/0 AWG (50 mm 2 ) Conductor cross-section 10 2 AWG (6 35 mm 2) 10 2 AWG (6 35 mm 2 ) 8 2/0 AWG (10 50 (70 f-st ) mm 2 ) Rated voltage/current 600 V, 115 A U 600 V, 115 A 2 1000 V, 125 A EN 600 V, 115 A U 600 V, 115 A 2 1000 V, 125 A EN 600 V, 150 A U 600 V, 150 A 2 1000 V, 150 A EN Terminal block width Strip length 16 mm/0.63 in. L 25 mm/0.98 in. 16 mm/0.63 in. L 25 mm/0.98 in. 20 mm/0.79 in. L 30 mm/1.18 in. Image Item Numbers through terminal block 285-135 285-134 285-935 1 Only suitable for DIN 35 x 15 rails ground terminal block 285-137 285-137/999-950 1 Only suitable for DIN 35 x 15 rails; 2.3 mm thick through terminal block 285-150 285-154 285-950 1 Only suitable for DIN 35 x 15 rails Accessories Adjacent jumper 285-435 (l N 85 A) 285-450 (l N 150 A for 1 jumper, l N 130 A for 2 4 jumpers) Step-down jumper 285-430 (l N 90 A) Power tap 285-427 (1x24... 10 AWG) (600 V, 30 A U / 800 V, 32 A EN) 285-447 (2x24... 10 AWG) (600 V, 30 A U / 1000 V, 41 A EN) Warning cover 285-420 285-440 Finger guard 285-421 285-441 Operating tool 210-721 (type 3, 5.5 x 0.8 mm screwdriver blade) 285-172 (Allen-wrench) Marking Accessories Marking strips 2009-110 (plain, white, 11 mm wide, 50 m reel) 2009-110 (plain, white, 11 mm wide, 50 m r Requires use of marker carrier WMB Inline markers 2009-115 (plain, white, 1500 markers, stretchable 5 5.2 mm) 2009-115 (plain, white, 1500 markers, str WMB Multi marking system 793-5501 (plain, white, 10 strips with 10 markers per card, stretchable 5 5.2 mm) 793-5501 (plain, white, 10 strips with 10 m stretchable 5 5.2 mm) Marker carrier 285-442 285-442 6
4/0 AWG (95 mm 2 ) 350 kcmil (185 mm 2 ) 8 2/0 AWG (10 50 (70 f-st ) mm 2 ) 4 4/0 AWG (25 95 mm 2 ) 4 4/0 AWG (25 95 mm 2 ) 1/0 AWG 350 kcmil (50 185 mm 2 ) 1/0 AWG 350 kcmil (50 185 mm 2 ) 600 V, 150 A U 600 V, 150 A 2 1000 V, 150 A EN 600 V, 200 A U 600 V, 200 A 2 1000 V, 232 A EN 600 V, 200 A U 600 V, 200 A 2 1000 V, 232 A EN 1000 V, 310 A U 1000 V, 310 A 2 1000 V, 353 A EN 1000 V, 310 A U 1000 V, 310 A 2 1000 V, 353 A EN 20 mm/0.79 in. L 30 mm/1.18 in. 25 mm/0.98 in. L 35 mm/1.38 in. 25 mm/0.98 in. L 35 mm/1.38 in. 32 mm/1.26 in. L 45 47 mm/1.77 1.85 in 32 mm/1.26 in. L 45 47 mm/1.77 1.85 in ground terminal block 285-157 285-157/999-950 1 Only suitable for DIN 35 x 15 rails; 2.3 mm thick, copper through terminal block 285-195 285-194 285-995 1 Only suitable for DIN 35 x 15 rails ground terminal block 285-197 285-197/999-950 1 Only suitable for DIN 35 x 15 rails; 2.3 mm thick, copper through terminal block 285-1185 285-1184 285-1189 * 1 Only suitable for DIN 35 x 15 rails ground terminal block 285-1187 285-1187/999-950 * 1 Only suitable for DIN 35 x 15 rails; 2.3 mm thick, copper 285-495 (l N 232 A for 1 jumper, l N 192 A for 2 4 jumpers) 285-1171 (l N 309 A for 1 jumper) 285-407 (2x24... 8 AWG) (600 V, 50 A U / 1000 V, 57 A EN) 285-1175 (1x24... 8 AWG) (600 V, 50 A U / 1000 V, 57 A EN) 285-170 285-1177 285-169 285-1178 285-172 (Allen-wrench) 285-172 (Allen-wrench) eel) 2009-110 (plain, white, 11 mm wide, 50 m reel) Requires use of marker carrier 2009-110 (plain, white, 11 mm wide, 50 m reel) etchable 5 5.2 mm) 2009-115 (plain, white, 1500 markers, stretchable 5 5.2 mm) 2009-115 (plain, white, 1500 markers, stretchable 5 5.2 mm) arkers per card, 793-5501 (plain, white, 10 strips with 10 markers per card, stretchable 5 5.2 mm) 793-5501 (plain, white, 10 strips with 10 markers per card, stretchable 5 5.2 mm) 285-442 1 These items have hazardous locations approvals - IECEx, ATEX, UL, Class 1, Zone 0 For more technical data, see our Full Line Catalog, Volume 1, or visit www.wago.us * Pending 7
WAGO 350 kcmil BLOCK WITH MOUNTING FLANGES WAGO s 350 kcmil (185 mm²) high-current, rail-mounted terminal blocks are also available with mounting flanges for direct installation on a sub-panel or mounting plate. This version shares the same accessories with the 350 kcmil rail-mount terminal blocks. For more information visit www.wago.us/sccr 8
Versions for functional ground in gray-yellow housing Nominal current: 310 A Rated voltage: up to 1000 VAC/DC Mount a 350 kcmil terminal block directly onto the plate via screw-type flanges. Vibration-Proof Fast Maintenance-Free 9
INSTALLATION 1. First, insert block-to-block connectors (285-1179) into housing slots. 2. Then, connect and align the terminal blocks. 3. Secure the terminal block to a mounting plate using two M8 cylinder-head screws and appropriate washers. The Panel Mount Version is the Newest Edition to our POWER CAGE CLAMP family, offering: The same reliable, vibration-proof, and maintenance-free connection as the DIN-rail mount POWER CAGE CLAMP 10
285 SERIES WITH MOUNTING FLANGES 350 kcmil (185 mm²) Conductor cross-section Rated voltage/current Terminal block width Strip length 1/0 AWG 350 kcmil (50 185 mm 2 ) 1000 V, 310 A U 1000 V, 310 A 2 1000 V, 353 A EN pending 32 mm/1.26 in. L 45 47 mm/1.77 1.85 in. 1/0 AWG 350 kcmil (50 185 mm 2 ) 1000 V, 310 A U 1000 V, 310 A 2 1000 V, 353 A EN 32 mm/1.26 in. L 45 47 mm/1.77 1.85 in. Image Item Numbers through terminal block with screw flanges 285-1161 285-1164 285-1163 1 through terminal block with screw flanges 285-1167 285-1167/999-950* 1 Accessories Adjacent jumper 285-1171 (l N 309 A for 1 jumper) Power tap 285-1175 (2x24... 8 AWG) (600 V, 50 A U / 1000 V, 57 A EN) Block-to-block connector IMAGE? 285-1179 Warning cover 285-1177 Finger guard 285-1178 Operating tool 285-172 Marking Accessories Marking strips 2009-110 (plain, white, 11 mm wide, 50 m reel) WMB Inline markers 2009-115 (plain, white, 1500 markers, stretchable 5 5.2 mm) WMB Multi marking system 793-5501 (plain, white, 10 strips with 10 markers per card, stretchable 5 5.2 mm) 1 These items have hazardous locations approvals - IECEx, ATEX, UL, Class 1, Zone 0 For more technical data, see our Full Line Catalog, Volume 1, or visit www.wago.us * Pending 11
WAGO Corporation N120 W19129 Freistadt Road Germantown, Wisconsin 53022 Telephone: 800 / DIN Rail (346-7245) Fax: 262 / 255-3232 info.us@wago.com www.wago.us Canada WAGO Corporation Tel. 800/DIN Rail (346-7245) Fax 262/255-3232 www.wago.ca Mexico WAGO Corporation Queretaro Tel. 001/800/309/5975 + 52/442/221/5946 Fax + 52/442/221/5063 www.wago.mx WAGO is a registered trademark of WAGO Verwaltungsgesellschaft mbh. Copyright WAGO Kontakttechnik GmbH & Co. KG all rights reserved. The content and structure of the WAGO Websites, catalogs, videos, and other WAGO media are subject to copyright. The dissemination or changing of the content of these pages and videos is not permitted. Furthermore, the content may neither be copied nor made available to third parties for commercial purposes. Also subject to copyright are the images and videos that were made available to WAGO Kontakttechnik GmbH & Co. KG by third parties. 60318567 0888-1583/0100-6945 185MM² POWER CC 1.1 US 09/2016 Printed in the United States Subject to design changes