Tanga DX200 The light-weight power pack for the clean removal of windows NEW 1700W, 70mm cutting detph, reduced weight
No damage to the reveal with the Tanga DX200: - Clean separation of the old window frame from the surrounding walls - No subsequent plastering or painting required - Minimal dust and dirt - Faster, less expensive renovation - Shorter over-all renovation time - Greater working comfort without Tanga DX200
with Tanga DX200
Benefits at a glance: Corner cuts 180 Rotating the base plate cover allows for corner and length cuts 70mm
Easy to handle Incorporates maximum cutting depth and power in a small, easy to use tool - 900 g 1700W Long lifetime Smooth-running, dust-removing column guide for optimal operating safety and a long product lifetime Cutting depth Unparalleled cutting depth of 70 mm for clean window removal
What s new? Now with quick clamping system 900g lighter Weight reduced from 5.4 kg to 4.5 kg. Ideal for overhead work Quick clamping system Faster changing of tools without losing screws Only one base plate cover The same base plate cover for longitudinal and corner cutting Corner dust protection Clip-on dust and work protection for corner cuts Rotating the base plate cover Now with spring loaded balls to allow for smoother sliding Ergonomics Large handle and small motor for effective machine guidance Rotating suction nozzle Prevents the suction hose from twisting, making work easier Height adjustment Available as an accessory for adjusting the cutting height
Now with quick clamping system Driving pins Due to the screwless quick clamping system: - Tools can be changed faster - No lost screws, and screws are inserted straight - No screws that cannot be loosened due to dirt or dust - Driving pins also prevent the clamping flange from jamming
Tanga applications Cuts into the reveal The powerful diamond allows for cuts into the surrounding masonry, tiles or the windowsill. The base plate cover, which rotates 180, also enables users to cut into the corner to cut the window completely free. Metal mounting brackets located in the masonry can also be cut. The optional height adjustment allows the cutting position to be adjusted precisely for new, thicker windows awaiting installation. Turn base plate cover 180 and clip on the corner dust protection Cut into the corner Straight cut, 60 mm deep
Tanga applications Cuts into wooden frames The 24-tooth saw blade is just as effective as one with twelve teeth, but features a longer lifetime. The window can be removed quickly by cutting into the wooden frame. Suitable tools are also available for aluminium or plastic windows. Even windows with thicknesses of over 70 mm can be cut by using the machine at an angle. Straight cut for 70 mm thick frames Angled cut for frames thicker than 70 mm Tip: Hold the machine at a slight angle to prevent scratches
Tanga applications Cuts using the rabbet stop If the window has been installed flush with the wall, the cut can be executed at the correct position using the optional rabbet stop. Placement in the rabbet enables cuts into the wooden frame using a saw blade, or into the masonry using a diamond blade. Place the machine in the rabbet and cut into the wooden frame Place the machine in the rabbet and cut into the masonry Narrow rabbet stop for maximum cutting length
The new Tanga DX200 has impressed us across the board! Faster cutting speed, more power, reduced weight and practical handling make it a musthave for window renovation. Jörn Mrohs, installation service, rekord Fenster und Türen
Tanga DX200 for window removals... Art.No. 111570D Diamond blade Ø 180 mm, corner dust protection, toolkit, in systainer Tanga DX200 for window removals, with rabbet stop... Art.No. 111570F Diamond blade Ø 180 mm, saw blade Ø 200 mm, Z24, rabbet stop, corner dust protection toolkit, in systainer Diamond blade Ø 180 mm...art.no. 132530 for cutting depths of up to 60 mm. Cuts concrete, brick, plaster or tiles. With very high cutting performance Art.No. 132530 Art.No. 132532 Art.No. 132531 Diamond blade Ø 200 mm...art.no. 132531 for cutting depths of up to 70 mm. Cuts concrete, brick, plaster or tiles. Diamond blade Diamond blade Ø 200 mm for plastic windows...art.no. 132532 or cutting depths of up to 70mm. Cuts plastic frames with steel frame reinforcement Art.No. 132330 Art.No. 132332 Art.No. 132331 Saw blade, Z12, Ø 200 mm... Art.No. 132330 Z12, Ø 200 mm for cutting depths of up to 70 mm. Cuts into wooden frames Saw blade, Z24, Ø 200 mm... Art.No. 132331 For cutting depths of up to 70 mm. Cuts into wooden frames. Very high cutting performance and increased lifetime with 24 teeth Saw blade, Z32, Ø 200 mm... Art.No. 132332 For cutting depths of up to 70 mm. Cuts into aluminium frames Art.No 121564 Art.No. 121565 Manufacturer: Lamello AG Joining technology info@lamello.com www.lamello.com Rabbet stop 0 to 50 mm...art.no. 121564 For placement in the rabbet instead of on the reveal or the frame surface. Ideal for situations where the window is flush with the wall Height adjustment 0 to 50 mm...art.no. 121565 Allows the cutting height to be adjusted depending on the application Art.No. 9815020EN