AP ER TURE ap-ə(r)-ˌchu r, -chər, -ˌtyu r, -ˌtu r noun

Aperture 4256

AP ER TURE ap-ə(r)-ˌchu r, -chər, -ˌtyu r, -ˌtu r noun REOGNIED WINNER 1. an opening or open space : hole. 2. the opening in a photographic lens that admits the light. 3. the diameter of the stop in an optical system that determines the diameter of the bundle of rays traversing the instrument. 4. the diameter of the objective lens or mirror of a telescope. 5. an opening or open space [from Latin apertura, from apert- 'opened', from aperire 'to open']

classic white bold anthracite

EW EW Three sizes The Aperture is now available in diamters of 12, 24 or 36 N N meet the new guy

APERTURE 4256 PROJET PROJET SPE TYPE NOTES ORDERING SPEIFIATION SPÉIFIATION DE OMMANDE MODEL MODÈLE APERTURE 12" APERTURE 24" APERTURE 36" ODE LIGHT SOURE SOURE LUMINEUSE (WATTAGE, LAMP TYPE, OTHER INFO) * LED.14 14W, LED LED.28 28W, LED LED.41 41W, LED *3983 AESSORY IS PROVIDED ONLY FOR OLOR TEMPERATURE TEMPÉRATURE DE OULEUR 00K 35 3500K 00K VOLTAGE VOLTAGE 120V 277V 120 VOLT 277 VOLT DIMMING OPTION OPTION DE GRADATION DV 0-10V DIMMING (120-277V) LED DIMMING DRIVER IS STANDARD IN THIS PRODUT. ABLE ABLE A AIRRAFT MOUNTING & LEAR ABLE, FIELD ADJUSTABLE DV A ABLE LENGTH LONGUEUR DE ABLE 60 ** 60" AIRRAFT ABLE (STD LENGTH) USTOM AIRRAFT ABLE LENGTH (PLEASE SPEIFY) FOR OVERALL LENGTH PLEASE ONTAT YOUR EUREKA REPRESENTATIVE. dazzling view MOUNTING ABLE OPTION OPTION DE MONTAGE DE ABLE FOR ONLY IF NO OPTION IS SELETED, A ROUND ANOPY WITH STRAIGHT AIRRAFT ABLES WILL BE PROVIDED RA ENTERED ROUND ANOPY - AIRRAFT ABLES ANGLED TO ENTER STRUTURE FINISH FINI STRUTURE HR HROME HR OPTIONS EXTERIOR SHADE FINISH FINI ABAT-JOUR EXTÉRIEUR WHM MATTE WHITE ANTE ANTHRAITE FINE TEXTURE INTERIOR SHADE FINISH FINI ABAT-JOUR INTÉRIEUR WHM MATTE WHITE WHM ANTE INTERIOR VIEW AESSORY AESSOIRE 3983 DEEP JUNTION BOX (PROVIDED FOR AS PER ABOVE) -RA (OPTION) PRODUT HARATERISTIS ARATÉRISTIQUES DU PRODUIT 67.87" 1724mm Ø11.81" Ø0mm 7.87" 200mm 67.87" 1724mm Ø11.81" Ø0mm 0.50" 12.7mm 7.87" 200mm DESIGN: : LIGHT SOURE: EXTERIOR FINISH: INTERIOR FINISH: ERTIFIED: Hidden inside of an elegant form is a beautiful soft glow of LED illumination that encircles a surprising hollow core. Aperture is available in three formats, small, large and extra-large. Easy to install, adjust and level triple aircraft cable mounting. Aperture features a custom LED light engine that is available with a standard 0-10V dimming driver. White or Anthracite matte polyester powder coating. Highly reflective matte white polyester powder coating. c-sa-us INVISIBLE LIGHT SOURE LED strips encircles a surprisingly hollow core with no direct line of sight to the light sources, resulting in a glare free experience ONEPTION: : SOURE LUMINEUSE: FINITION EXTERNE: FINITION INTERNE: ERTIFIÉ: achée tout au fond de cette forme élégante se trouve une lumière douce et radieuse qui encercle un noyau évidé. L Aperture est offerte en trois formats, petit, large et extra-large. âbles de retenue de type aviation facilitant l installation, l ajustement et la mise à niveau. Aperture est composée de bandes de DEL sur-mesure offert avec un pilote d intensité variable de type 0-10V. Peinture en poudre de polyester blanc ou anthracite mat. Peinture en poudre de polyester hautement réfléchissante blanc mat. c-sa-us

Anatomy ANATOMY APERTURE Photometric Report PHOTOMETRI REPORT PHOTOMETRI REPORT PHOTOMETRI APERTURE REPORT APE TRIPLE TRIPLE AIRRAFT AIRRAFT ABLES ABLES MOUNTING MOUNTING Easy installation Easy installation and level and and level adjustment level adjustment INTEGRATED LED DRIVER (24 and 36 in only) INTEGRATED LED DRIVER LED DRIVER (24 and (2436 and in 36 only) in only) Dimmable 0-10V electronic driver Dimmable Dimmable 0-10V 0-10V electronic electronic driver driver 0.125in[3.2mm] for 24/36in 0.08in[2mm] for 12in THIK SHELL The Aperture is made of THIK THIK thick SHELL gauge SHELL aluminum The Aperture The ending Aperture with is made a straight is made of edge of EXTERNAL OLORS thick gauge thick gauge aluminum aluminum External shell can be ordered in white or HIGH PERFORMANE LED ending STRIPS ending with a with straight a straight edge edge EXTERNAL EXTERNAL OLORS anthracite OLORS matte powder coating ustom made modules External External shell can shell be can ordered be ordered in white in INTERNAL white or or REFLETOR HIGH HIGH PERFORMANE Nichia LED LED STRIPS LED STRIPS anthracite anthracite matte matte powder powder coating Highly coating reflective white matte powder ustom ustom made made modules modules INTERNAL coating INTERNAL for REFLETOR optimal REFLETOR light diffusion Nichia Nichia LED LED SEE-THROUGH Highly Highly reflective reflective white white matte matte powder powder LED strips encircles a coating coating for optimal for optimal light diffusion light diffusion surprisingly hollow core SEE-THROUGH LED strips LED strips encircles encircles a a surprisingly surprisingly hollow hollow core core VERSATILITY Available in three different diameters, all versions feature the same shape making it a complete family. Aperture Ø12 () is also available with aircraft cables angled to center (RA option shown below). VERSATILITY Available Available in three in three different different diameters, diameters, all versions all versions feature feature the same the same shape shape making making it a complete it a complete family. family. Aperture Aperture Ø12 Ø8 () Ø12 in () is also is available also available with aircraft with aircraft cables cables angled angled to center to center (RA option (RA option shown Ø16 shown in below). below). Ø203 mm Ø6 mm Ø8 inø8 in 203 Ø203 mm mm Ø12 in Ø5mm Ø24 in Ø610 mm Ø36 in Ø915 mm Ø16 in Ø16 in Ø6 Ø6 mm mm 0.125in[3.2mm] for 0.125in[3.2mm] 24/36in for 24/36in INVISIBLE LIGHT SOURE With no direct line of sight to the light source, the user has a glare free experience. INVISIBLE INVISIBLE LIGHT LIGHT SOURE SOURE With no With direct no direct line of line sight of to sight the to the HARATERISTIS free experience. Ø12 in Ø12 in Ø24 in Ø24 in Ø36 in Ø36 in RA RA Ø5mm Ø5mm Ø610 Ø610 mm mm Ø915 Ø915 mm mm RA 0.08in[2mm] for 12in 0.08in[2mm] for 12in winner winner winner light source, light source, the user the has user a has glare a glare free experience. LIGHT SOURE DELIVERED LUMENS 39x Nichia ~662lm 78x Nichia ~1270lm 117x Nichia ~2742lm SYSTEM WATTAGE 16.2W 32.4W 47.9W HARATERISTIS MODULE UL recognized - ustom design flexible strip - Made in USA IGHT LIGHT SOURE SOURE RI 39x Nichia 39x Nichia 85 ± RI 16.2W (typical) ± 16.2W 78x Nichia 78x Nichia ± 32.4W ± 32.4W 117x Nichia 117x Nichia ± 47.9W ± 47.9W DELIVERED STRUTURE LUMENS LUMENS ~908lm ~908lm ustom aluminum spinning (2mm thickness) ~2329lm ~2329lm ~2725lm ~2725lm ODULE MODULE LIGHT DISTRIBUTION UL recognized UL recognized Indirect - ustom reflection - ustom design on internal design flexible refelctor flexible strip strip - (no Made direct - Made in sight USA in view USA of LED source) VOLTAGE 120V or 277V RI RI 85 RI 85 (typical) RI (typical) DRIVE (DIMMING) 0-10V dimming (DV) STRUTURE ustom ustom aluminum aluminum spinning spinning (2mm (2mm thickness) thickness) LM-79 On request IGHT LIGHT DISTRIBUTION Indirect Indirect reflection reflection internal on internal refelctor refelctor (no direct (no direct sight APPROX. WEIGHT 4 lbs (1.8 kg) 14 sight view lbs (6kg) of view LED of source) LED source) 35 lbs (15.5 kg) OLTAGE VOLTAGE WARRANTY 120V 120V or 277V 5 or years 277V RIVE DRIVE (DIMMING) (DIMMING) 0-10V 0-10V dimming dimming (DV) (DV) 225 de Liège Ouest, Suite #200 M-79 LM-79 On request On request Montréal (Q), anada H2P 1H4 PPROX. APPROX. WEIGHT WEIGHT 4 lbs 4 (1.8 lbs kg) (1.8 kg) Tel : 514.385.3515 Fax : 514.385.4169 lbs (6kg) lbs (6kg) 35 lbs 35 (15.5 lbs (15.5 kg) kg) WARRANTY 5 years 5 years PHOTOMETRI REPORT -LED.41. T (K): System wattage (W)*: Distribution: Luminous shape: 90-270 Axis: 2 luminaires, plane 0: Eureka Lighting 2017 00 2742 47.9 57 35.43 (900) 35.43 (900) 15.74 (0) 1.02 1.02 1.10 2 luminaires, plane 0: 1.02 1.02 1.10 PHOTOMETRI APERTURE REPORT cd angles 0 -LED.28. 90 T (K): 00 1270 151 System wattage (W)*: Distribution: 80 32.4 70 39 2 453 604 754 905 1056 1207 1358 This photometric report has been generated using methods recommended by the IESNA. alculations are based on simulated photometric data and can This change photometric without report notice. has End-user been generated environment using and methods application recommended by the IESNA. alculations are based on simulated photometric data and can change without notice. End-user environment and application (including, but not limited to, voltage variation and dirt accumulation) can cause actual photometric performance to differ Eureka from the Lighting 2017 performance calculated (including, using but the not data limited provided to, voltage by the variation manufacturer. and dirt accumulation) can cause actual photometric performance to differ Eureka from the performance Lighting 2017 calculated using the data provided by the manufacturer. V2.0-201708 In no event will Eureka Lighting be responsible for any loss resulting from any use of this report. In no event will Eureka Lighting be responsible for any loss resulting from any use of this report. This photometric report has been generated using methods recommended by the IESNA. alculations are based on simulated photometric data and can change without notice. End-user environment and application (including, but not limited to, voltage variation and dirt accumulation) can cause actual photometric performance to differ from the performance calculated using the data provided by the manufacturer. In no event will Eureka Lighting be responsible for any loss resulting from any use of this report. Eureka Lighting 2017 -LED.41. T (K): System wattage (W)*: Distribution: Luminous shape: 90-270 Axis: Luminous shape: 90-270 Axis: 2 luminaires, plane 0: 60 23.62 (600) 23.62 (600) 15.74 (0) 50 V2.0-201708 2 luminaires, 604plane 0: PHOTOMETRI APERTURE REPORT 754 Eureka Lighting 2017 67.87" 1724mm 00 662 16.2 41 60 11.81 (0) 11.81 (0) 50 7.87 (200) 0.95 0.94 1.07 7.87" 200mm 2 luminaires, 292 plane 0: 0.95 0.94 1.07 APERTURE *System wattage include 365 driver and LED module consumption cd angles Ø11.81" This photometric report has been generated using methods recommended by the IESNA. alculations are This 0based photometric on simulated report photometric has been 10 generated data and using can change methods 20 without recommended notice. End-user by the IESNA. environment alculations and application are based on simulated photometric data and can change without notice. End-user environment and applica 0 10 20 (including, but not limited to, voltage variation and dirt accumulation) can cause actual photometric performance (including, but to differ not limited from the to, performance voltage variation calculated Ø0mm and dirt using accumulation) the data provided can cause by actual the manufacturer. photometric performance 0 to differ from the 10performance calculated 20 using the data provided by the manufacturer. In no event will Eureka Lighting be responsible for any loss resulting from any use of this report. In no event will Eureka Lighting be responsible for any loss resulting from any use of this report. This photometric report has been generated using methods recommended by the IESNA. alculations are ba 0-180 0-180 (including, but not limited to, voltage variation and dirt accumulation) can cause actual photometric perform In no event will Eureka Lighting be responsible 0 - for 180any loss resulting from any use of this report. Eureka Lighting 2017 00 2742 47.9 57 35.43 (900) 35.43 (900) 15.74 (0) 1.00 1.00 1.10 cd -LED.28. 0 T (K): System wattage (W)*: Distribution: 151 Luminous 2 dimensions Luminous shape: 90-270 Axis: 453 cd 0 73 146 219 292 365 438 511 584 656 angles -LED.14. 90 T (K): System 905wattage (W)*: 80 Distribution: 70 Luminous 1056 shape: 90-270 Axis: Luminaire 1207 spacing criteria 2 luminaires, plane 0: 1358 V2.0-201708 00 1270 32.4 39 23.62 (600) 23.62 (600) 15.74 (0) 1.00 1.00 1.10 angles cd -LED.14. 90 0 T (K): System 80 wattage (W)*: Distribution: 73 Photometric 70 type 0 38 76 114 152 190 228 0 10 20 266 0-180 146 Luminous 60 shape: 90-270 Axis: 219 50 4 342 438 511 584 67.87" 1724mm 656 90 80 70 60 50 Ø11.81" Ø0mm V2.0-201708 00 662 16.2 41 11.81 (0) 11.81 (0) 7.87 (200) 7.87" 200mm 90 80 70 60 50 0 10 20 0-180 ang 425 www.eu reka Eureka Lighting 2017 Lighting 2017 225 de 225 Liège de Liège Ouest, Ouest, Suite Suite #200 #200 Montréal Montréal (Q), (Q), anada anada H2P 1H4 H2P 1H4 Tel : 514.385.3515 Tel : Fax : Fax 514.385.4169 : V4.0-201708 V4.0-201708

Installation Instructions MAINTENANE 1 MODEL 120 Pendant Suspension 3 2 4 (1.8kg / 4 LBS) W Y X W Ø185mm Ø7.28 X 46mm 1.82 Y 92mm 2.64 80mm 3.15 BOÎTE DE JONTION PROFONDE NÉESSAIRE DEEP JUNTION BOX REQUIRED #8-32 x 1.5 6 5 7 8 BLAK / NOIR LINE / LIGNE WHITE / BLAN NEUTRAL / NEUTRE 0-10V DIM (+) 0-10V DIM (-) BLAK / NOIR ROUGE / RED JAUNE / YELLOW OPTIONNEL OPTIONAL ANRAGES ANHORS 9 BLEU / BLUE 2- FASTEN GRIPPERS WITH APPROPRIATE ANHORS & SREWS (NOT INLUDED) 2- INSTALLE LES SERRE-FILS À L AIDE DE BONS ANRAGES ET VIS (NON INLUS) 3- INSERT BOTH #8-32 SREWS LEAVING A DISTANE BETWEEN THE SREW HEAD AND THE JUNTION BOX 3-INSÉRER LES DEUX VIS #8-32 EN LAISSANT UN ESPAE DE ENTRE LES TÊTES DE VIS ET LA BOÎTE DE JONTION 4- FOR S DIRETLY ON THE JUNTION BOX, REPLAE THE STRAIN RELIEF ASSEMBLED TO THE ANOPY WITH THE SUPPLIED GRIPPER. RUN THE WIRE DIRETLY THROUGH THE GRIPPER. 4- POUR L SUR UNE BOÎTE DE ONNEXION, REMPLAER LE SERRE-FIL DU PAVILLION PAR LE SERRE-FIL/PASSE-FIL INLUS DANS LA BOÎTE. ENFILER LE ORDON D ALIMENTATION. 5-HANG THE MOUNTING PLATE ON ONE OF THE SREW HEADS USING THE SLOT IN THE FOLDED FLAP. 5- SUSPENDRE LA PLAQUE DE MONTAGE SUR L UNE DES VIS EN UTILISANT L OUVERTURE DE L AILETTE MAKE ONNETIONS: PURPLE WIRE (0-10V DIM +) = PURPLE WIRE, GREY WIRE (0-10V DIM -) = GREY WIRE, BLAK WIRE (LINE) = BLAK WIRE, WHITE WIRE (NEUTRAL) = RED WIRE. * AP OFF PURPLE AND GREY WIRE IF NON-DIMMING BRANHEMENT: FIL MAUVE (0-10V DIM +) = FIL MAUVE, FIL GRIS (0-10V DIM -) = FIL GRIS, FIL NOIR (LIGNE)= FIL NOIR, FIL BLAN (NEUTRE) = FIL ROUGE * SI NON GRADATABLE, LAISSER LES APUHONS SUR LES FILS MAUVE ET GRIS 6- UNATTAH MOUNTING PLATE FROM FOLDED FLAP AND ATTAH USING THE TWO KEYHOLE SLOTS. INSERT THE LAST STEEL ABLE IF ENTER MOUNTED 6- DÉTAHER LA PLAQUE DE MONTAGE ET LA FIXER AUX VIS AVE LES DEUX TROUS DE SERRURE. INSÉRER LE DERNIER ÂBLE D AIER (MONTAGE ENTRAL) 7- TIGHTEN DOWN SREWS & LIFT ANOPY INTO POSITION 7- RESERRER LES VIS. LEVER LE PAVILLON EN POSITION 8- ADJUST HEIGHT OF FIXTURE (ABLES SHOULD BE PERFETLY VERTIAL) 8- AJUSTER LA HAUTEUR DU LUMINAIRE (ÂBLES PARFAITEMENT VERTIAUX) 9- UT THE EXTRA ABLE LENGTH USING WIRE UTTERS 9- OUPER L EXEDENT DES ABLES D AIER À L AIDE DE PINES 1- PLAN AND MARK YOUR MOUNTING POINTS 1- PLANIFIE ET MARQUER VOS POINTS D ANRAGE APERTURE V1.0-2018 225 de Liège Ouest, Suite #200 Montréal (Q), anada H2P 1H4 Tel : 514.385.3515 Fax : 514.385.4169

MAINTENANE Installation Instructions RA Pendant Suspension Installation Instructions 1 2 BLAK / NOIR LINE / LIGNE WHITE / BLAN NEUTRAL / NEUTRE 0-10V DIM (+) 0-10V DIM (-) 1 2 3 120 4 BOÎTE DE JONTION PROFONDE NÉESSAIRE DEEP JUNTION BOX REQUIRED BLAK / NOIR ROUGE / RED OPTIONNEL OPTIONAL #8-32 x 1.5 #8-32 x 1.5 JAUNE / YELLOW BLEU / BLUE W 5 6 0-10V DIM (+) 0-10V DIM (-) 3 4 5 Y MODEL W X Y (6kg / 14 LBS) (15.5kg / 35 Lbs) Ø380mm Ø14.96 Ø600mm Ø23.62 X 95mm 3.74 150mm 5.91 190mm 7.48 0mm 11.81 164.5mm 6.48 260mm 10.23 BLAK / NOIR LINE / LIGNE WHITE / BLAN NEUTRAL / NEUTRE WHITE / BLAN BLAK / NOIR 7 8 9 ANRAGES ANHORS 10 1- INSERT BOTH #8-32 SREWS LEAVING A DISTANE BETWEEN THE SREW HEAD AND THE JUNTION BOX 2-HANG THE MOUNTING PLATE ON ONE OF THE SREW HEADS USING THE SLOT IN THE FOLDED FLAP MAKE ONNETIONS: PURPLE WIRE (0-10V DIM +) = PURPLE WIRE, GREY WIRE (0-10V DIM -) = GREY WIRE, BLAK WIRE (LINE) = BLAK WIRE, WHITE WIRE (NEUTRAL) = RED WIRE. * AP OFF PURPLE AND GREY WIRE IF NON-DIMMING 1-INSÉRER LES DEUX VIS #8-32 EN LAISSANT UN ESPAE DE ENTRE LES TÊTES DE VIS ET LA BOÎTE DE JONTION 2- SUSPENDRE LA PLAQUE DE MONTAGE SUR L UNE DES VIS EN UTILISANT L OUVERTURE DE L AILETTE BRANHEMENT: FIL MAUVE (0-10V DIM +) = FIL MAUVE, FIL GRIS (0-10V DIM -) = FIL GRIS, FIL NOIR (LIGNE)= FIL NOIR, FIL BLAN (NEUTRE) = FIL ROUGE * SI NON GRADATABLE, LAISSER LES APUHONS SUR LES FILS MAUVE ET GRIS 1- PLAN AND MARK YOUR MOUNTING POINTS 2- FASTEN GRIPPERS WITH APPROPRIATE ANHORS & SREWS (NOT INLUDED) 3- INSERT BOTH #8-32 SREWS LEAVING A DISTANE BETWEEN THE SREW HEAD AND THE JUNTION BOX 4- FOR S DIRETLY ON THE JUNTION BOX, REPLAE THE STRAIN RELIEF ASSEMBLED TO THE ANOPY WITH THE SUPPLIED GRIPPER. RUN THE WIRE DIRETLY THROUGH THE GRIPPER. 1- PLANIFIE ET MARQUER VOS POINTS D ANRAGE 2- INSTALLE LES SERRE-FILS À L AIDE DE BONS ANRAGES ET VIS (NON INLUS) 3-INSÉRER LES DEUX VIS #8-32 EN LAISSANT UN ESPAE DE ENTRE LES TÊTES DE VIS ET LA BOÎTE DE JONTION 4- POUR L SUR UNE BOÎTE DE ONNEXION OU RA, REMPLAER LE SERRE-FIL DU PAVILLION PAR LE SERRE-FIL/PASSE-FIL INLUS DANS LA BOÎTE. ENFILER LE ORDON D ALIMENTATION. 3- UNATTAH MOUNTING PLATE FROM FOLDED FLAP AND ATTAH USING THE TWO KEYHOLE SLOTS. INSERT THE LAST STEEL ABLE 3- DÉTAHER LA PLAQUE DE MONTAGE DE L AILETTE ET LA FIXER AU VIS À L AIDE DES DEUX TROUS DE SERRURE. INSÉRER LE DERNIER ÂBLE D AIER 5-HANG THE MOUNTING PLATE ON ONE OF THE SREW HEADS USING THE SLOT IN THE FOLDED FLAP 5- SUSPENDRE LA PLAQUE DE MONTAGE SUR L UNE DES VIS EN UTILISANT L OUVERTURE DE L AILETTE 4- TIGHTEN DOWN SREWS & LIFT ANOPY INTO POSITION 5- ADJUST HEIGHT OF FIXTURE 4- RESERRER LES VIS. LEVER LE PAVILLON EN POSITION 5- AJUSTER LA HAUTEUR DU LUMINAIRE (ÂBLES PARFAITEMENT VERTIAUX) MAKE ONNETIONS: PURPLE WIRE (0-10V DIM +) = PURPLE WIRE, GREY WIRE (0-10V DIM -) = GREY WIRE, BLAK WIRE (LINE) = BLAK WIRE, WHITE WIRE (NEUTRAL) = RED WIRE. * AP OFF PURPLE AND GREY WIRE IF NON-DIMMING BRANHEMENT: FIL MAUVE (0-10V DIM +) = FIL MAUVE, FIL GRIS (0-10V DIM -) = FIL GRIS, FIL NOIR (LIGNE)= FIL NOIR, FIL BLAN (NEUTRE) = FIL ROUGE * SI NON GRADATABLE, LAISSER LES APUHONS SUR LES FILS MAUVE ET GRIS 6- UNATTAH MOUNTING PLATE FROM FOLDED FLAP AND ATTAH USING THE TWO KEYHOLE SLOTS. INSERT THE LAST STEEL ABLE IF ENTER MOUNTED 6- DÉTAHER LA PLAQUE DE MONTAGE ET LA FIXER AUX VIS AVE LES DEUX TROUS DE SERRURE. INSÉRER LE DERNIER ÂBLE D AIER (MONTAGE ENTRAL) 7- TIGHTEN DOWN SREWS & LIFT ANOPY INTO POSITION 7- RESERRER LES VIS. LEVER LE PAVILLON EN POSITION V1.0-2018 8- ADJUST HEIGHT OF FIXTURE (ABLES SHOULD BE PERFETLY VERTIAL) 9- UT THE EXTRA ABLE LENGTH USING WIRE UTTERS 8- AJUSTER LA HAUTEUR DU LUMINAIRE (ÂBLES PARFAITEMENT VERTIAUX) 9- OUPER L EXEDENT DES ABLES D AIER À L AIDE DE PINES 225 de Liège Ouest, Suite #200 Montréal (Q), anada H2P 1H4 Tel : 514.385.3515 Fax : 514.385.4169 RA APERTURE

Aperture 4256