ulletin 800MR/800M Push uttons ulletin 800MR uild a Catalog Number 22.5 mm mounting hole Type 13 oiltight Round operators ul. 800MR ulletin 800M uild a Catalog Number 22.5 mm mounting hole Type 13 oiltight Square backlit operators UL Listed File: E14840, E10314 Guide: NKCR, NIV CSA Certified: LR1234, LR11924 IEC Compliance, IEC 529 ul. 800M ul. 800MR - Momentary Contact Push uttons uild a Catalog Number Momentary Contact Push utton Units, Non-Illuminated Contact Terminations perators come standard with stab terminations. For large screw contact terminations, add letter K to the end of the cat. no. Standard contact blocks with small screw terminations and Logic Reed contact blocks with stab terminations sold separately. Flush Head Unit 800MR-A1 Extended Head Unit 800MR-2A Mushroom Head Unit 800MR-D2
Contact Type utton Color Flush Head Extended Head Mushroom Head 1 N.. Green 800MR-A1D1 800MR-1D1 800MR-D1D1 lack 800MR-A2D1 800MR-2D1 800MR-D2D1 Red 800MR-A6D1 800MR-6D1 800MR-D6D1 1 N.C. Green 800MR-A1D2 800MR-1D2 800MR-D1D2 lack 800MR-A2D2 800MR-2D2 800MR-D2D2 Red 800MR-A6D2 800MR-6D2 800MR-D6D2 1 N.. - 1 N.C. Green 800MR-A1A 800MR-1A 800MR-D1A lack 800MR-A2A 800MR-2A 800MR-D2A Red 800MR-A6A 800MR-6A 800MR-D6A 2 N.. - 2 N.C. Green 800MR-A1 800MR-1 800MR-D1 lack 800MR-A2 800MR-2 800MR-D2 Red 800MR-A6 800MR-6 800MR-D6 800MR A 1 A a b c d a b c d perator Type utton Color Standard Contact Cartridges Contact lock Termination Type Code Description Code Description Code Description Code Description A Flush head 1 Green lank No contacts lank Stab terminals Extended head 2 lack A 1 N.. - 1 N.C. K Large screw D Mushroom head 3 range A2 2 N.. 4 Grey A3 1 N..E.M. - 1 N.C.L.. 5 White A4 2 N.C. 6 Red A7 1 N.C.L.. - 1 N.C. 7 lue 2 N.. - 2 N.C. 9 Yellow D1 1 N.. D2 1 N.C. Momentary Contact Push utton Units, Illuminated Contact Terminations perators come standard with stab terminations. For large screw contact terminations, add letter K to the end of the cat. no. Standard contact blocks with small screw terminations and Logic Reed contact blocks with stab terminations sold separately. Flush Head Unit 800MR-QA24GA Extended Head Unit 800MR-P16RA Mushroom Head Unit 800MR-QM24RA
Contact Type Power Module Type Supply Voltage Lamp Type Lens Color Flush Head Extended Head Mushroom Head 1 N.. - 1 N.C. Full Voltage 24V AC/DC Incandescent Red 800MR-QA24RA 800MR-Q24RA 800MR-QM24RA Green 800MR-QA24GA 800MR-Q24GA 800MR-QM24GA Amber 800MR-QA24AA 800MR-Q24AA 800MR-QM24AA Transformer 120V AC Incandescent Red 800MR-PA16RA 800MR-P16RA 800MR-PM16RA Green 800MR-PA16GA 800MR-P16GA 800MR-PM16GA Amber 800MR-PA16AA 800MR-P16AA 800MR-PM16AA Full Voltage 12V AC/DC LED Red 800MR-QAL12RA 800MR-QL12RA 800MR-QML12RA Green 800MR-QAL12GA 800MR-QL12GA 800MR-QML12GA Amber 800MR-QAL12AA 800MR-QL12AA 800MR-QML12AA 24V AC/DC LED Red 800MR-QAL24RA 800MR-QL24RA 800MR-QML24RA Green 800MR-QAL24GA 800MR-QL24GA 800MR-QML24GA Amber 800MR-QAL24AA 800MR-QL24AA 800MR-QML24AA Transformer 120V AC LED Red 800MR-PAL16RA 800MR-PL16RA 800MR-PML16RA Green 800MR-PAL16GA 800MR-PL16GA 800MR-PML16GA Amber 800MR-PAL16AA 800MR-PL16AA 800MR-PML16AA 800MR PA L 24 R a b c d e f a b c d e f perator Illumination ptions Input Voltage Lens Color Standard Contact Cartridges Transformer Full Voltage Contact lock Termination Type Code Description Code Description Code Description Code Color Code Description Code Description PA Flush lank Standard illumination as determined by power module type 12 12V AC/DC A Amber lank No contacts lank Stab terminals P Extended L LED 24 24V AC/DC lue A 1 N.. - 1 N.C. K Large screw PM Mushroom 10 120V AC C Clear A2 2 N.. Full Voltage Transformer G Green A3 1 N..E.M. - 1 N.C.L.. Code Description Code Description R Red A4 2 N.C. QA Flush 16 120V AC 50/60 Hz W White A7 1 N.C.L.. - 1 N.C. Q Extended 26 240V AC 50/60 Hz No lens with contact blocks 2 N.. - 2 N.C. QM Mushroom lank No lens without contact blocks D1 D2 1 N.. 1 N.C. uild a Catalog Number 2-Position Push-Pull and Push-Pull/Twist Release Units, Non-Illuminated Contact Terminations perators come standard with stab terminations. For large screw contact terminations, add letter K to the end of the cat. no. Standard contact blocks with small screw terminations and Logic Reed contact blocks with stab terminations sold separately.
2-Position Push-Pull 800MR-F6A 2-Position Push-Pull/Twist 800MR-FT6A4 Contact Type perator Position utton Color Push-Pull Push-Pull/ Twist Release Maintained Maintained ut In No Contacts Red 800MR-F6 800MR-FT6 1 N.. Red 800MR-F6D1 800MR-FT6D1 1 N.C. Red 800MR-F6D2 800MR-FT6D2 1 N.. - 1 N.C. Red 800MR-F6A 800MR-FT6A 1 N.C. - 1 N.C. Red 800MR-F6A4 800MR-FT6A4 Note: = Closed/ = pen 3-Position Push-Pull Units, Non-Illuminated Contact Terminations perators come standard with stab terminations. For large screw contact terminations, add letter K to the end of the cat. no. Standard contact blocks with small screw terminations and Logic Reed contact blocks with stab terminations sold separately. 3-Position Push-Pull 800MR-FN6A7 Contact Type perator Position utton Color Push-Pull Momentary Maintained Momentary ut Center In No Contacts Red 800MR-FN6 1 N.. - 1 N.C. Red 800MR-FN6A 1 N.C. - 1 N.C.L.. Red 800MR-FN6A7 1 N.C. - 1 N.C.L.. 1 N.C. - 1 N.C.L.. Red 800MR-FN66 Note: = Closed/ = pen 800MR F T 6 A a b c d e f (2-Position)
800MR F N 6 A a b 1 c d e f (3-Position) a b b 1 c perator Type perator Function perator Function perator 2-Position 3-Position Code Description Code Description Code perator Position Code Color F Push-pull unit lank Maintained push-pull lank Non-illuminated T Twist-release ut Center In N Momentary Maintained Momentary d e f utton Color Contact Cartridges Contact lock Termination Type Code Description Code Description Code Color lank No contacts lank Stab terminals 1 Green A 1 N.. - 1 N.C. K Large screw 2 lack A2 2 N.. 3 range A4 2 N.C. 4 Grey A7 1 N.C.L.. - 1 N.C. 5 White 2 N.. - 2 N.C. 6 Red D1 1 N.. 7 lue D2 1 N.C. 9 Yellow Note: See Table 1 for Target description. lank No cap Table 1. Target Selection Code 2-Position Contact Description 3-Position Code ut In ut Center In lank No contacts lank D1 N.. D2 N.C. A N.. - N.C. A A2 N.. - N.. A2 A4 N.C. - N.C. A4 N.C. - N.C.L.. A7 N.. - N.C. N.. - N.C. Note: = Closed/ = pen 2-Position Push-Pull and Push-Pull/Twist Release Units, Illuminated
Contact Terminations perators come standard with stab terminations. For large screw contact terminations, add letter K to the end of the cat. no. Standard contact blocks with small screw terminations and Logic Reed contact blocks with stab terminations sold separately. Illuminated 2-Position Push-Pull 800MR-FQ24RA Illuminated 2-Position Push-Pull/Twist 800MR-FTP16RA Lamp Type Power Module Type Supply Voltage Lens Color perator Position Push-Pull Push-Pull/ Twist Release Maintained Maintained Contacts ut In Incandescent Full Voltage 12V AC/DC Red N.. - 800MR-FQ12RA 800MR-FTQ12RA N.C. 24V AC/DC Red 800MR-FQ24RA 800MR-FTQ24RA Transformer 120V AC Red N.. - 800MR-FP16RA 800MR-FTP16RA N.C. 240V AC Red 800MR-FP26RA 800MR-FTP26RA LED Full Voltage 12V AC/DC Red N.. - 800MR-FQL12RA 800MR-FTQL12RA N.C. 24V AC/DC Red 800MR-FQL24RA 800MR-FTQL24RA Transformer 120V AC Red N.. - 800MR-FPL16RA 800MR-FTPL16RA N.C. 240V AC Red 800MR-FPL26RA 800MR-FTPL26RA Note: = Closed/ = pen Transformers operate at 50/60 Hz. 3-Position Push-Pull Units, Illuminated Contact Terminations perators come standard with stab terminations. For large screw contact terminations, add letter K to the end of the cat. no. Standard contact blocks with small screw terminations and Logic Reed contact blocks with stab terminations sold separately. Illuminated 3-Position Push-Pull 800MR-FNQ24RA7
Lamp Type Power Module Type Supply Voltage Lens Color perator Position Push-Pull Momentary Maintained Momentary Contacts ut Center In Incandescent Full Voltage 12V AC/DC Red N.C.L.. - 800MR-FNQ12RA7 N.C. 24V AC/DC Red 800MR-FNQ24RA7 Transformer 120V AC Red N.C.L.. - 800MR-FNP16RA7 N.C. 240V AC Red 800MR-FNP26RA7 LED Full Voltage 12V AC/DC Red N.C.L.. - 800MR-FNQL12RA7 N.C. 24V AC/DC Red 800MR-FNQL24RA7 Transformer 120V AC Red N.C.L.. - 800MR-FNPL16RA7 N.C. 240V AC Red 800MR-FNPL26RA7 Note: = Closed/ = pen Transformers operate at 50/60 Hz. 800MR F T P 16 R A a b c d e f g h (2-Position) 800MR F N P 16 R A a b 1 c d e f g h (3-Position) a b b 1 c d perator Type perator Function perator Function perator Type Illumination ptions 2-Position 3-Position Code Description Code Description Code perator Position Code Description Code Description F Push-pull unit lank Maintained P Transformer lank Incandescent lamp T Twist-release ut Ctr. In Q Full voltage L LED N Mom Main Mom Mom-Momentary Main-Maintained e f g h Voltage utton Color Contact Cartridges Contact lock Termination Type Full Voltage Code Description Code Color Code Description Code Description 12 12V AC/DC A Amber lank No contacts lank Stab terminals 24 24V AC/DC lue A 1 N.. - 1 N.C. K Large screw 10 120V AC C Clear A2 2 N.. Transformer G Green A4 2 N.C. Code Description R Red A7 1.N.C.L.. - 1 N.C. 16 120V AC 50/60 Hz W White 2 N.. - 2 N.C. 26 240V AC 50/60 Hz No cap D1 1 N.. D2 1 N.C. Note: See Table 1 for Target description.
Table 2. Target Selection Code 2-Position Contact Description 3-Position Code ut In ut Center In lank No contacts lank D1 N.. D2 N.C. A N.. - N.C. A A2 N.. - N.. A2 A4 N.C. - N.C. A4 N.C. - N.C.L.. A7 N.. - N.C. N.. - N.C. Note: = Closed/ = pen ul. 800MR - Selector Switches uild a Catalog Number 2-Position Selector Switch Units, Non-Illuminated Contact Terminations perators come standard with stab terminations. For large screw contact terminations, add letter K to the end of the cat. no. Standard contact blocks with small screw terminations and Logic Reed contact blocks with stab terminations sold separately. Standard Knob perator 800MR-HH2LA Knob Lever perator 800MR-HK2LA Contact Type Knob Color Side Contact perator Position perator Type M = Maintained S = Spring Return Standard Knob Knob Lever lack Left A M M 800MR-HH2LA 800MR-HK2LA S M 800MR-HH4LA 800MR-HK4LA 1 N.. - 1 N.C. M S 800MR-HH5LA 800MR-HK5LA lack Left A M M 800MR-HH2 800MR-HK2 S M 800MR-HH4 800MR-HK4 Right A 2 N.. - 2 N.C. M S 800MR-HH5 800MR-HK5 Note: = Closed/ = pen 2-Position Cylinder Lock perator 800MR-H31
Contact Type Side Contact perator Position perator Type M = Maintained S = Spring Return Cylinder Lock Lock in Left Lock in Right Lock in oth Left A M M 800MR-H31LA 800MR-H32LA 800MR-H33LA S M 800MR-H42LA 1 N.. - 1 N.C. M S 800MR-H48LA Left A M M 800MR-H31 800MR-H32 800MR-H33 S M 800MR-H42 Right A 2 N.. - 2 N.C. M S 800MR-H48 Note: = Closed/ = pen Target tables are reversed from those shown. Key removable in locked position only. 800MR H H 2 L A a b c d e e 1 f (Selector Switch) 800MR H 31 L A a b c 1 c 2 d e e 1 f (Cylinder Lock) a b c c 1 c 2 perator Positions perator Color and Type perator Function perator Function/Locking Position Key Codes Standard Knob Standard Knob Maintained Code Key No. Master Key Code Description Code Description Code Description Code Description lank T100 (standard) 1T H 2-position selector switch No knob 2 Maintained 31 Lock in left 02 T101 1T H 2-position cylinder lock H lack 4 Spring return from left Knob Lever 5 Spring return from right 32 Lock in right 03 T102 1T 33 Lock in both 04 T106 1T Code Description Spring Return From Left 05 T107 1T No knob lever Code Description 07 T109 2T K lack 42 Lock in right 08 T134 2T Cylinder Lock Spring Return From Right 09 T135 2T Code Description Code Description 10 T136 2T lank Key 48 Lock in left 14 T147 2T
d e e 1 f Cam Type Contact Cartridge Position Contact Cartridges Contact lock Termination Type Code Description Code Description Code Description Code Description cam lank oth left and right lank No contacts lank Stab terminals L Left A 1 N.. - 1 N.C. K Large screw A2 2 N.. A4 2 N.C. 2 N.. - 2 N.C. D1 1 N.. D2 1 N.C. P1 3 N.. P2 3 N.C. P3 2 N.. - 1 N.C. P4 2 N.C. - 1 N.. P5 4 N.. P6 4 N.C. P7 3 N.. - 1 N.C. P8 1 N.. - 3 N.C. Note:See Table 1 for Target arrangements Table 1. Selector Switch Cam Targets Cam Description (2-Position) Target perator Function Maintained and Spring Returned From Right Spring Returned From Left N.C. N.. N.. N.C. Note: = Closed/ = pen Key removable in locked position only. If no optional key code is specified, the standard key (T100) will be supplied. Red, green, blue, yellow, orange, grey, and white non-illuminated selector switch knobs and lever knobs must be ordered separately. Logic Reed and small screw contact blocks must be ordered separately. Contact cartridge position code (Table e) must be L. Contact cartridge position code (Table e) must be --. 3-Position Selector Switch Units, Non-Illuminated Contact Terminations perators come standard with stab terminations. For large screw contact terminations, add letter K to the end of the cat. no. Standard contact blocks with small screw terminations and Logic Reed contact blocks with stab terminations sold separately. Standard Knob perator 800MR-JH2 Knob Lever perator 800MR-JK2
Contact Type Color Side Contact perator Position perator Type M = Maintained S = Spring Return Standard Knob Knob Lever lack Left A M M M 800MR-JH2LA 800MR-JH2LA S M M 800MR-JH4LA 800MR-JK4LA M M S 800MR-JH5LA 800MR-JK5LA 1 N.. - 1 N.C. S M S 800MR-JH9LA 800MR-JK9LA lack Left A M M M 800MR-JH2 800MR-JK2 S M M 800MR-JH4 800MR-JK4 Right A M M S 800MR-JH5 800MR-JK5 2 N.. - 2 N.C. S M S 800MR-JH9 800MR-JK9 Note: = Closed/ = pen Cylinder Lock perator 800MR-J44 Contact Type Side Contact perator Position perator Type M = Maintained S = Spring Return Cylinder Lock Lock in All Lock in Center Lock in Right Left A M M M 800MR-J44LA 800MR-J42LA 800MR-J43LA S M M 800MR-J50LA 800MR-J52LA M M S 800MR-J38LA 1 N.. - 1 N.C. S M S 800MR-J631LA Left A M M M 800MR-J44 800MR-J42 800MR-J43 S M M 800MR-J50 800MR-J52 Right A M M S 800MR-J38 2 N.. - 2 N.C. S M S 800MR-J631 Note: = Closed/ = pen Key removable in locked position only. 800MR J H 2 L A a b c d e e 1 f (Selector Switch) 800MR J 41 L A a b c 1 c 2 d e e 1 f (Cylinder Lock)
a b c c 1 perator Positions perator Color and Type perator Function perator Function/Locking Position Standard Knob Description Knob Lever Maintained Code Description Code Code Code Description Code Description J 3-position selector switch No knob 2 Maintained 41 Lock in left J 3-position cylinder lock H lack K 4 Spring return from left 42 Lock in center lank Key lank 5 Spring return from right 43 Lock in right 9 Spring return from both 44 Lock in all positions 45 Lock in left and center 46 Lock in right and left 47 Lock in right and center Spring Return From Left Code Description 50 Lock in center 52 Lock in right 51 Lock in right and center Spring Return From Right Code Description 69 Lock in left 38 Lock in center 73 Lock in left and center Spring Return From Left and Right Code Description 631 Lock in center c 2 d e e 1 f Key Codes Cam Type Contact Cartridge Position Contact Cartridges Contact lock Termination Type 1T Master Series Standard Description Code Key No. Code Description Code Description Code Left side Right side Code Description lank T100 (standard) cam lank oth left and right lank No contacts lank Stab terminals 02 T101 K K cam L Left A 1 N..-1 N.C. K Large screw 03 T102 P P cam R Right A3 1 N..E.M.-1 N.C.L.. 04 T106 U U cam 1 N..-1 N.C. 05 T107 P1 2 N.. 1 N.. 2T Master Series P2 2 N.C. 1 N.C. Code Key No. P3 2 N.. 1 N.C. 07 T109 P4 2 N.C. 1 N.. 08 T134 P5 2 N.. 2 N.. 09 T135 P6 2 N.C. 2 N.C. 10 T136 P7 2 N.. 1 N.. - 1 N.C. 14 T147 P8 2 N.C. 1 N.. - 1 N.C. P9 1 N.. 1 N.C. T1 1 N.. - 1 N.C. 1 N.C. Note:See Table 1 for cam and contact block selection. (T100) will be supplied. L or R. --. Table 1. Selector Switch Cam Targets
Note: = Closed/ = pen Cam Description Target K P U Left Side Right Side Left Side Right Side Left Side Right Side Left Side Right Side N.. N.. N.. N.. N.. N.C. N.C. N.. N.C. N.. N.. N..E.M. N..E.M. N.C.L.. N..E.M. N.C.L.. N.C. N.C.L.. N.C.L.. N.C.L.. N.C.L.. N.C. N.C. N.C. N.C. 4-Position Selector Switch Units, Non-Illuminated Contact Terminations perators come standard with stab terminations. For large screw contact terminations, add letter K to the end of the cat. no. Standard contact blocks with small screw terminations and Logic Reed contact blocks with stab terminations sold separately. Standard Knob perator 800MR-NH2Q Knob Lever perator 800MR-NK2Q Contact Type Color Side Contact perator Position perator Type Standard Knob Knob Lever lack Left A Maintained in All Positions 800MR-NH2Q 800MR-NK2Q 2 N.. - 2 N.C. Right A Note: = Closed/ = pen Cylinder Lock perator 800MR-N31Q Contact Type Side Contact perator Position perator Type Cylinder Lock Lock In All Lock In Position 1 Lock In Position 2 Left A Maintained in All Positions 800MR-N61Q 800MR-N31Q 800MR-N32Q 2 N.. - 2 N.C. Right A Note: = Closed/ = pen Key removable in locked position only.
800MR N H 2 Q a b c d e f (Selector Switch) 800MR N 31 Q a b c 1 c 2 d e f (Cylinder Lock) a b c c 1 perator Positions perator Color and Type perator Function perator Function/Locking Position Standard Knob Description Knob Lever Standard Key Code Description Code Code Code Description Code Description N 4-position selector No knob 2 Maintained 31 Lock in position 1 N 4-position cylinder lock H lack K 32 Lock in position 2 lank Key lank 33 Lock in position 3 34 Lock in position 4 41 Lock in position 1-2 42 Lock in position 1-3 43 Lock in position 1-4 44 Lock in position 2-3 45 Lock in position 2-4 46 Lock in position 3-4 51 Lock in position 1-2-3 52 Lock in position 1-2-4 53 Lock in position 1-3-4 54 Lock in position 2-3-4 61 Lock in all positions c 2 d e f Key Codes Cam Type and Target Table Contact Cartridges Contact lock Termination Type Code Key No. Master Key Q Standard lock/stab Terminations Code Description lank T100 (standard) 1T Target Contact Type (Rear View) Code Description lank Stab terminals 02 T101 1T Left Right lank No contacts K Large screw 03 T102 1T 1 N.. 2 N.. - 2 N.C. 04 T106 1T 1 N.C. 05 T107 1T 1 N.. 07 T109 2T 1 N.C. 08 T134 2T Note: = Closed/ = pen 09 T135 2T 10 T136 2T 14 T147 2T (T100) will be supplied. 2-Position Knob/Lever Type Selector Switch Units, Illuminated
Contact Terminations perators come standard with stab terminations. For large screw contact terminations, add letter K to the end of the cat. no. Standard contact blocks with small screw terminations and Logic Reed contact blocks with stab terminations sold separately. Standard Knob perator 800MR-24HA2RA Knob Lever perator 800MR-24HL2RA Contact Type Type Volts Lamp Knob Color perator Position perator Type M = Maintained S = Spring Return Standard Knob Knob Lever Full Voltage 24V AC/DC Incandescent Red Transformer 120V AC Red Full Voltage 24V AC/DC LED Red Transformer 120V AC Red M M 800MR-24HA2RA 800MR-24HL2RA S M 800MR-24HA4RA 800MR-24HL4RA M S 800MR-24HA5RA 800MR-24HL5RA M M 800MR-16HA2RA 800MR-16HL2RA S M 800MR-16HA4RA 800MR-16HL4RA M S 800MR-16HA5RA 800MR-16HL5RA M M 800MR-24HAL2RA 800MR-24HLL2RA S M 800MR-24HAL5RA 800MR-24HLL5RA M M 800MR-16HAL2RA 800MR-16HLL2RA S M 800MR-16HAL4RA 800MR-16HLL4RA 1 N.. - 1 N.C. M S 800MR-16HAL5RA 800MR-16HLL5RA Note: = Closed/ = pen Transformers operate at 50/60 Hz. Target tables are reversed from those shown. 3-Position Knob/Lever Type Selector Switch Units, Illuminated Contact Terminations perators come standard with stab terminations. For large screw contact terminations, add letter K to the end of the cat. no. Standard contact blocks with small screw terminations and Logic Reed contact blocks with stab terminations sold separately. Standard Knob perator 800MR-24JA2RA Knob Lever perator 800MR-24JL2RA
Contact Type Type Volts Lamp Knob Color perator Position perator Type M = Maintained S = Spring Return Standard Knob Knob Lever Full Voltage 24V AC/DC Incandescent Red M M M 800MR-24JA2RA 800MR-24JL2RA S M M 800MR-24JA4RA 800MR-24JL4RA S M S 800MR-24JA9RA 800MR-24JL9RA Transformer 120V AC Red M M M 800MR-16JA2RA 800MR-16JL2RA S M M 800MR-16JA4RA 800MR-16JL4RA S M S 800MR-16JA9RA 800MR-16JL9RA Full Voltage 24V AC/DC LED Red M M M 800MR-24JAL2RA 800MR-24JLL2RA S M M 800MR-24JAL4RA 800MR-24JLL4RA S M S 800MR-24JAL9RA 800MR-24JLL9RA Transformer 120V AC Red M M M 800MR-16JAL2RA 800MR-16JLL2RA S M M 800MR-16JAL4RA 800MR-16JLL4RA 1 N.. - 1 N.C. S M S 800MR-16JAL9RA 800MR-16JLL9RA Note: = Closed/ = pen Transformers operate at 50/60 Hz. 800MR 24 H A L 2 R A a b c d e f g 1 g 2 h (2-Position) 800MR 24 J A L 2 R A a b c d e f 1 g 1 g 2 h (3-Position) a b c Input Voltage perator Positions perator Color and Type Full Voltage Standard Knob Description Knob Lever Code Description Code Description Code Code 12 12V AC/DC H 2-position No knob 24 24V AC/DC J 3-position A Red L 10 120V AC Green M Transformer D Amber P Code Description Y Clear Z 16 120V AC 50/60 Hz 26 240V AC 50/60 Hz d e f f 1 Illumination ptions perator Function Cam Type (2-Position) Cam Type (3-Position) Code Description Code Description Code Description Code Description lank Incandescent 2 Maintained cam cam L LED 4 Spring return from left Note:For Target arrangements see Table 1. K K cam 5 Spring return from right P P cam 9 Spring return from both U U cam Note:For Target arrangements see Table 2.
g 1 g 2 h Contact Cartridge Position Contact Cartridges Contact lock Termination Type Code Description Description lank oth right and left Code Left side Right side Code Description R Right lank No contacts lank Stab terminals A 1 N..-1 N.C. K Large screw A2 2 N.. A3 1 N..E.M.- 1 N.C.L.. A4 2 N.C. 1 N..-1 N.C. 1 N..-1 N.C. D1 1 N.. D2 1 N.C. P1 2 N.. 1 N.. P2 2 N.C. 1 N.C. P3 2 N.. 1 N.C. P4 2 N.C. 1 N.. P5 2 N.. 2 N.. P6 2 N.C. 2 N.C. P7 2 N.. 1 N..-1 N.C. P8 2 N.C. 1 N..-1 N.C. P9 1 N.. 1 N.C T1 1 N..-1 N.C. 1 N.C. Note: See Table 1 for 2-position contact block selection. See Table 2 for 3-position contact block selection. R. --. Table 1. Selector Switch Cam Targets Cam Description (2-Position) Target perator Function Maintained and Spring Return From Right Spring Return From Left N.C. N.. N.. N.C. Note: = Closed/ = pen Table 2. Selector Switch Cam Targets Cam Description (3-Position) Target K P U Left Side Right Side Left Side Right Side Left Side Right Side Left Side Right Side N.. N.. N.. N.. N.. N.C. N.C. N.. N.C. N.. N.. N..E.M. N..E.M. N.C.L.. N..E.M. N.C.L.. N.C. N.C.L.. N.C.L.. N.C.L.. N.C.L.. N.C. N.C. N.C. N.C. Note: = Closed/ = pen 4-Position Knob/Lever Type Selector Switch Units, Illuminated Contact Terminations
perators come standard with stab terminations. For large screw contact terminations, add letter K to the end of the cat. no. Standard contact blocks with small screw terminations and Logic Reed contact blocks with stab terminations sold separately. Standard Knob perator 800MR-24NA2Q Knob Lever perator 800MR-24NL2Q Contact Type Type Volts Lamp Color perator Position perator Type Standard Knob Knob Lever Full Voltage 24V AC/DC Incandescent Red Maintained in All Positions 800MR-24NA2Q 800MR-24NL2Q 24V AC/DC LED Red 800MR-24NAL2Q 800MR-24NLL2Q 2 N.. - 2 N.C. 120V AC LED Red 800MR-10NAL2Q 800MR-10NLL2Q Note: = Closed/ = pen 800MR 24 N A L 2 Q a b c d e f g h (4-Position) a b c d Input Voltage perator Positions perator Color and Type Illumination ptions Full Voltage Standard Knob Description Knob Lever Code Description Code Description Code Code Code Description 12 12V AC/DC N 4-position No knob lank Incandescent 24 24V AC/DC A Red L L LED 10 120V AC Green M D Amber P Y Clear Z e f g h perator Function Cam Type and Target Table Contact Cartridges Contact lock Termination Type Q Code Standard knob function Target Contact Type (Rear View) Standard lock Code Description Code Description 2 Maintained Left Right 2 N.. - 2 N.C. lank Stab terminals 1 N.. 1 N.C. 1 N.. 1 N.C. Note: = Closed/ = pen Note: = Closed/ = pen
ul. 800MR - Potentiometers, Pilot Lights, and Wobble Sticks uild a Catalog Number Potentiometer perator nly This operator is suitable for mounting potentiometers or other small single turn rotary operated devices having 3/8 in. diameter bushings (1/4 3/8 in. long) and 1/4 in. diameter shaft (3/4 1-1/2 in. long), plus providing 600V electrical clearances to panel. Includes operator, instruction sheet, and graduated marking ring. This operator does not have a resistive potentiometer element. Potentiometer Unit 800MR-N37 Type Potentiometer perator nly (without Resistive Element) 800MR-N37 Pilot Light Units Contact Terminations perators come standard with stab terminations. To order large screw contact terminations for pilot lights add letter K to the end of the cat. no. For push-to-test pilot lights add the letter K. Pilot Light 800MR-Q24R Push-to-Test Pilot Light 800MR-QT24R
Lamp Type Volts Color Pilot Light Push-to-Test Dual Input Incandescent Full Voltage 12V AC/DC Red 800MR-Q12R 800MR-QT12R Green 800MR-Q12G 800MR-QT12G Amber 800MR-Q12A 800MR-QT12A 24V AC/DC Red 800MR-Q24R 800MR-QT24R Green 800MR-Q24G 800MR-QT24G Amber 800MR-Q24A 800MR-QT24A Transformer 120V AC 50/60 Hz Red 800MR-P16R 800MR-PT16R 800MR-PDT16R Green 800MR-P16G 800MR-PT16G 800MR-PDT16G Amber 800MR-P16A 800MR-PT16A 800MR-PDT16A LED Full Voltage 24V AC/DC Red 800MR-QL24R 800MR-QTL24R Green 800MR-QL24G 800MR-QTL24G Amber 800MR-QL24A 800MR-QTL24A 120V AC Red 800MR-QL10R 800MR-QTL10R Green 800MR-QL10G 800MR-QTL10G Amber 800MR-QL10A 800MR-QTL10A Transformer 120V AC 50/60 Hz Red 800MR-PL16R 800MR-PTL16R Green 800MR-PL16G 800MR-PTL16G Amber 800MR-PL16A 800MR-PTL16A Dual input transformer is transformer-relay type. Comes standard with screw terminations. 800MR P L 24 R a b c d e a b c perator Illumination ptions Input Voltage Transformer Full Voltage Code Description Code Description Code Description P Pilot light lank Incandescent 12 12V AC/DC PDT Pilot light dual input transformer L LED 24 24V AC/DC PT Pilot light push-to-test 10 120V AC Full Voltage Transformer Code Description Code Description Q Pilot light 16 120V AC 50/60 Hz QT Pilot light push-to-test 26 240V AC 50/60 Hz d Lens Color e Contact lock Termination Type Pilot Lights Code Color Code Description lank No lens lank Stab terminals A Amber K Large screw lue Note:If large screw terminations are desired with a dual input transformer, ( 800MR-PDT ), configurator space e must be left blank. C G R W Clear Green Red White
Wobble Stick Units Designed for ease of operation. Wobble stick units have spring return action and may be operated from any angle. It is particularly useful with pendant stations. Contact Terminations perators come standard with stab terminations. For large screw contact terminations, add letter K to the end of the cat. no. Standard contact blocks with small screw terminations and Logic Reed contact blocks with stab terminations are sold separately. Wobble Stick Unit 800MR-M1 Contact Type Contact Type 1 N.. - 1 N.C. 800MR-M1A 2 N.. - 2 N.C. 800MR-M1 800MR M1 A a b c a b c perator Type Contact Cartridges Contact lock Termination Type Code Description Code Description Code Description M1 Wobble stick lank No contacts lank Stab terminals A 1 N.. - 1 N.C. K Large screw 2 N.. - 2 N.C. ul. 800M uild a Catalog Number Momentary Contact Push utton Units, Non-Illuminated Contact Terminations Devices come standard with stab terminations. For large screw contact terminations, add letter K to the end of the cat. no. Standard contact blocks with small screw terminations and Logic Reed contact blocks with stab terminations sold separately.
Flush Head Unit 800M-CA1 Extended Head Unit 800M-C1 Contact Type utton Color Flush Head Extended Head 1 N.. Green 800M-CA1D1 Grey 800M-CA4D1 800M-C4D1 Red 800M-C6D1 Yellow 800M-CA9D1 800M-C9D1 1 N.C. Green 800M-CA1D2 Grey 800M-CA4D2 800M-C4D2 Red 800M-C6D2 Yellow 800M-CA9D2 800M-C9D2 1 N.. - 1 N.C. Green 800M-CA1A Grey 800M-CA4A 800M-C4A Red 800M-C6A Yellow 800M-CA9A 800M-C9A 2 N.. - 2 N.C. Green 800M-CA1 Grey 800M-CA4 800M-C4 Red 800M-C6 Yellow 800M-CA9 800M-C9 800 M CA 1 A a b c d e a b c d e ezel Color perator Type Color Insert Contact lock(s) Contact lock Termination Type Standard Code Color Code Description Code Color Code Description Code Description M lack CA Flush head No color insert lank No contacts lank Stab terminals C Extended head 1 Green D1 1 N.. K Large screw 3 range D2 1 N.C. 4 Grey A 1 N.. - 1 N.C. 5 White A2 2 N.. 6 Red A4 2 N.C. 7 lue A7 1 N.C.L.. - 1 N.C. 9 Yellow 2 N.. - 2 N.C. Momentary Contact Push utton Units, Illuminated Contact Terminations Devices come standard with stab terminations. For large screw contact terminations, add letter K to the end of the cat. no. Standard contact blocks with small screw terminations and Logic Reed contact blocks with stab terminations sold separately.
Flush Head Unit 800M-CPA16GA Extended Head Unit 800M-CQ24RA Contact Type Type Volts/Lamp Color Flush Head Extended Head Full voltage Transformer Full voltage 24 AC/DC Incandescent 50/60 Hz 120 AC Incandescent 12 AC/DC LED Red 800M-CQ24RA Green 800M-CQA24GA Amber 800M-CQA24AA 800M-CQ24AA Red 800M-CP16RA Green 800M-CPA16GA Amber 800M-CPA16AA 800M-CP16AA Red 800M-CQL12RA Green 800M-CQAL12GA 1 N.. - 1 N.C. 24 AC/DC LED Amber 800M-CQAL12AA 800M-CQL12AA Red 800M-CQL24RA Green 800M-CQAL24GA Amber 800M-CQAL24AA 800M-CQL24AA Transformer 120 AC LED 50/60 Hz Red 800M-CPL16RA Green 800M-CPAL16GA Amber 800M-CPAL16AA 800M-CPL16AA 800 M CQ A L 06 R A a b c d e f g h a b c d e ezel Color Power Module Type perator Type Illumination ptions Voltage Full Voltage Code Color Code Description Code Description Code Description Code Description M lack CQ Full voltage A Flush lank Incandescent 12 12V AC/DC CP Transformer Extended L LED 24 24V AC/DC 10 120V AC Transformer Code Description 16 120V AC 26 240V AC
f g h Color Insert Contact lock(s) Contact lock Termination Type Standard Code Color Code Description Code Description lank No contacts lank No contacts lank Stab terminals Packet of colored inserts D1 1 N.. K Large screw A Amber D2 1 N.C. lue A 1 N.. - 1 N.C. C Clear A2 2 N.. G Green A4 2 N.C. R Red A7 1 N.C.L.. - 1 N.C. 2 N.. - 2 N.C. codes or standards. Dual perator Momentary Contact Push utton Units, Non-Illuminated Contact Terminations Devices come standard with stab terminations. For large screw contact terminations, add letter K to the end of the cat. no. Standard contact blocks with small screw terminations and Logic Reed contact blocks with stab terminations sold separately. Contacts perators are supplied as standard with 2 N.. - 2 N.C. contacts. Dual perator lack ezel 800M-D16 Contact Action utton Type utton Color Legend Marking lack ezel oth uttons Free Flush Extended Green Red lank lank 800M-D16 Left lock Right lock Flush utton Depressed Flush Extended Green Red N FF 800M-D1650 Left lock Right lock Extended utton Depressed Flush Extended Green Red START STP 800M-D1664 Left lock Right lock Must use ul. 800MS color inserts and legend plates. Type 13 oiltight, square traditional
800 M D16 a b c d e a b c d e ezel Color perator Type Contact locks Contact lock Termination Type Legend ptions Standard Code Description Code Description Code Description Code Description Code Description M lack D16 Dual push button unit Upper Flush green Lower Extended red lank No contact lank Stab terminals lank Upper lank Lower lank 2 N.. - 2 N.C. K Large screw 50 Upper N Lower FF 64 Upper START Lower STP Pilot Light Units Contact Terminations Devices come standard with stab terminations. For large screw contact terminations, add letter K to the end of the cat. no. For push-to-test pilot lights, add the letter K. Pilot Light 800M-CQ24RS Push-to-Test Pilot Light 800M-CPT16G Lamp Type Volts Color Pilot Light Push-to-Test Incandescent Full voltage 24 AC/DC Red 800M-CQ24R 800M-CQT24R Green 800M-CQ24G 800M-CQT24G Amber 800M-CQ24A 800M-CQT24A Transformer 120 AC 50/60 Hz Red 800M-CP16R 800M-CPT16R Green 800M-CP16G 800M-CPT16G Amber 800M-CP16A 800M-CPT16A LED Full voltage 12 AC/DC Red 800M-CQL12R 800M-CQTL12R Green 800M-CQL12G 800M-CQTL12G Amber 800M-CQL12A 800M-CQTL12A 24 AC/DC Red 800M-CQL24R 800M-CQTL24R Green 800M-CQL24G 800M-CQTL24G Amber 800M-CQL24A 800M-CQTL24A Transformer 120 AC 50/60 Hz Red 800M-CPL16R 800M-CPTL16R Green 800M-CPL16G 800M-CPTL16G Amber 800M-CPL16A 800M-CPTL16A 800 M CP L 24 R a b c d e f
a b c ezel Color Power Module Type Illumination ptions Code Color Code Description Code Description M lack CP Transformer lank Incandescent CQ Full voltage L LED T TL Push-to-test Push-to-test with LED d e f Voltage Lens Color Termination Type Full Voltage Pilot Lights Code Description Code Color Code Description 12 12V AC/DC Packet of colored inserts lank Stab terminals 24 24V AC/DC A Amber Push-to-Test Pilot Lights 10 120V AC lue Code Description Transformer C Clear/white lank Stab terminals Code Description G Green K Large screw 16 120V AC R Red 26 240V AC Contact locks ulletin 800M contact blocks are available with quick connect type terminals and screw terminals with pressure plates (in two sizes). Each quick connect type termination will accept two 0.110 x 0.032 in. push-on connectors or one 0.250 x 0.032 in. connector. Each small screw terminal with pressure plate will accept a maximum of one #14 AWG wire or two #16 AWG wires. The large screw terminals with pressure plates are similar in size to the ulletin 800T (full size) contact block terminals. 800M-A 800M-AS 800M-AK 800M-AR Contact Arrangement Standard lock Logic Reed lock Quick Connect Terminals Small Screw Terminals with Pressure Plates Large Screw Terminals with Pressure Plates Quick Connect Terminals 1 N.. 800M-D1 800M-D1S 800M-D1K 800M-D1R 1 N.C. 800M-D2 800M-D2S 800M-D2K 800M-D2R 1 N.. - 1 N.C. 800M-A 800M-AS 800M-AK 800M-AR 2 N.. 800M-A2 800M-A2S 800M-A2K 800M-A2R 2 N.C. 800M-A4 800M-A4S 800M-A4K 800M-A4R 1 N..E.M. - 1 N.C.L.. 800M-A3 800M-A3S 800M-A3K 1 N.C.L.. - 1 N.C. 800M-A7 800M-A7S 800M-A7K Screw terminals with pressure plates are not available. Note:For contact block rating information see Standard Contact Ratings. Color Caps Non-Illuminated Devices
Flush Head Push uttons Extended Head Push uttons Mushroom uttons Push-Pull Units Twist or Pull Release Caps Color Flush Head Push uttons Extended Head Push uttons Mushroom uttons Push-Pull Units Twist or Pull Release Caps Green 800MR-N41 800MR-N21 800MR-N56G 800MR-N160 800MR-N30 lack 800MR-N42 800MR-N22 800MR-N56 800MR-N160H 800MR-N30H range 800MR-N43 800MR-N23 800MR-N56 800MR-N160F 800MR-N30F Gray 800MR-N44 800MR-N24 800MR-N56GR 800MR-N160G White 800MR-N45 800MR-N25 800MR-N56W 800MR-N160J Red 800MR-N46 800MR-N26 800MR-N56R 800MR-N160A 800MR-N30A lue 800MR-N47 800MR-N27 800MR-N56L 800MR-N160C 800MR-N30C Yellow 800MR-N49 800MR-N29 800MR-N56Y 800MR-N160E 800MR-N30E Illuminated Devices Pilot Light Push-to-Test Pilot Light and Illuminated Push utton Push-Pull Unit Mushroom utton Twist or Pull Release Caps Color Pilot Lights Push-to-Test Pilots and Illuminated Push uttons Illuminated Push-Pull Units Illuminated Mushroom uttons Illuminated Twist or Pull Release Caps Red 800MR-N1R 800MR-N2R 800MR-N159R 800MR-N156R 800MR-N20R Green 800MR-N1G 800MR-N2G 800MR-N159G 800MR-N20G Amber 800MR-N1A 800MR-N2A 800MR-N159A 800MR-N156A 800MR-N20A lue 800MR-N1 800MR-N2 800MR-N159 800MR-N156 800MR-N20 White 800MR-N1W 800MR-N2W 800MR-N159W 800MR-N156W Clear 800MR-N1C 800MR-N2C 800MR-N159C 800MR-N156C 800MR-N20C Replacement Selector Switch Knobs Selector Knob 800MR-NG Selector Knob Lever 800MR-NK Selector Knob 800MR-L Selector Knob Lever 800MR-LM Knobs
Color Selector Switch Knobs, Non-Illuminated Color Selector Switch Knobs, Illuminated Standard Knob Knob Lever Standard Knob Knob Lever Gray 800M-NG 800M-NT Red 800M-NA 800M-NL Green 800M-N 800M-NM Red 800M-LA 800M-LL lue 800M-NC 800M-NN Amber 800M-LD 800M-LP Yellow 800M-NE 800M-NR Clear 800M-LY 800M-LZ range 800M-NF 800M-NS Green 800M-L 800M-LM lack 800M-NH 800M-NK White 800M-NJ 800M-NV ul. 800M Color Chip Kits Description Type of Unit Color Color Chip Kits These kits are available for replacement on backlit style devices. A packet of color chips containing one of each color is included in each kit. Full-face illuminated Amber lue 800MS-N10A 800MS-N10 Clear 800MS-N10C Green 800MS-N10G Red 800MS-N10R Non-illuminated lue 800MS-N12 800MSN10 Grey Green range Red White Yellow 800MS-N12GR 800MS-N12G 800MS-N12 800MS-N12R 800MS-N12W 800MS-N12Y oots Description Insulation oot When properly combined with a ulletin 800MR unit, this device meets CSA grounding requirements. 800M-N18 Description Color Rubber oot These accessories are used as dust covers. They can be added to flush and extended head push button units (illuminated and non-illuminated) to protect against foreign materials from reaching the opening between the button and the mounting ring. lack Red Green lue Yellow 800MR-N8 800MR-N9 800MR-N10 800MR-N11 800MR-N12 800MRN9 Clear 800MR-N14 Miscellaneous Description Extended Mounting Ring This mounting ring protects against accidental push button operation. Cat. No. 800MR-N4 Padlocking Cover Stainless steel mounting bracket with clear plastic cover. Guards against unauthorized operation. Used with round design push buttons and selector switches (not for use with wing lever). Also available for 2-position push-pull units (button must be in the depressed position when the cover is closed). 800MR-N6 (Padlock not included)
Description Locking Ring Wrench This device is used to tighten and loosen mounting rings properly in the 800MR family. 800MR-N3 Hole Closing Plug Wherever an enclosure or flush plate with more than the required number of openings is used, this neat-appearing plug can be supplied to close the unused openings. 800M-N1 Lamp Remover This tool can be used to remove and install wedge based lamps in Illuminated selector switches. 800M-N5 Connectors Used with wire sizes AWG 18 22. The connectors come in packages of 100 pieces. 800M-NT2 Guard for Illuminated Push uttons This device is used to prevent accidental operation of illuminated push buttons. 800MR-N93 Mounting Ring This device is a retaining ring used to keep an operator in the panel when removing the guard ring to service the light bulb. Lens Remover This device makes it easier to remove the lens. 40167-287-02 800MS-N9 These must be ordered in multiples of 100. Description Style Color Additional ezels These bezels fit square traditional and backlit styles. Grey 800MS-N16 800MS-N16 (Grey) 800M-N16 (lack) lack 800M-N16 Flush button backlit Grey 800MS-N17 lack 800M-N17 Extended button backlit Grey 800MS-N18 lack 800M-N18 800MSN17 Description Type Legend Insert Do-It-Yourself Kits These kits contain material necessary to create transparent backlit legend inserts Legend marking start package 800MS-N13 Replacement Lamps Replacement Incandescent and Light Emitting Diode (LED) Lamps Lamp Type Lamp Voltage ANSI Number Incandescent Full Voltage and Transformer 6.3V AC 86 800M-N15 Full Voltage 12V AC/DC 73 800M-N16 24V AC/DC 85 800M-N17 Dual Input Transformer 6.3V AC 755/1866 800T-N65 Standard LED Full Voltage 6.3V AC/DC 800T-N60x 14V AC/DC 800T-N61x 28V AC/DC 800T-N62x 120V AC 800T-N64x Full Voltage 6.3V AC/DC 800T-N60x To complete the cat. no. replace the x with the first letter of the desired color: Amber, Green, Red, White, or lue. To complete the cat. no. replace the x with the first letter of the desired color: Amber, Green, Red, or White. All illuminated devices, except dual input transformer units, use T 1-3/4 wedge base units. Existing ulletin 800M devices may have incandescent lamps replaced with shock and vibration resistant LEDs. Existing ANSI# 86, 73, or 85 lamps may be replaced by LEDs.
Legend Plates ul. 800MR Legend Plates Standard Size lank Legend Plate Gray ( 800MR-W00) Red ( 800MR-W600) Large Size lank Legend Plate Gray ( 800MR-W100) Red ( 800MR-W6100) Push uttons/pilot Lights Marking Marking Marking CLSE 800MR-W01 LWER 800MR-W11 SLW 800MR-W18 DWN 800MR-W02 FF 800MR-W09 START 800MR-W19 EMERG. STP (Red) 800MR-W624 N 800MR-W10 STP (Red) 800MR-W620 FAST 800MR-W03 PEN 800MR-W13 TEST 800MR-W21 FRWARD 800MR-W23 UT 800MR-W12 UP 800MR-W22 HIGH 800MR-W04 PUSH-T-TEST 800MR-W29 1ST SPEED 800MR-W25 IN 800MR-W06 RAISE 800MR-W14 2ND SPEED 800MR-W26 INCH 800MR-W07 RESET 800MR-W15 3RD SPEED 800MR-W27 JG 800MR-W08 REV 800MR-W16 4TH SPEED 800MR-W28 LW 800MR-W05 RUN 800MR-W17 Selector Switches Marking Marking Marking PEN-CLSE 800MR-W57 STP-START 800MR-W64 HAND-FF-AUT 800MR-W78 RAISE-LWER 800MR-W58 SUM-WINT 800MR-W65 HIGH-LW 800MR-W53 RUN-JG 800MR-W59 UP-DWN 800MR-W66 JG-REV 800MR-W54 SAFE-RUN 800MR-W60 1-2-3-4 800MR-W80 JG-RUN 800MR-W55 SLW-FAST 800MR-W61 AUT-FF-HAND 800MR-W79 JG-STP-RUN 800MR-W76 SLW-FF-START 800MR-W75 FR-FF-REV 800MR-W77 LEFT-RIGHT 800MR-W56 START-JG 800MR-W62 FR-REV 800MR-W51 FF-N 800MR-W50 START-STP 800MR-W63 HAND-AUT 800MR-W52 lank Legends Custom Legends Size Color Number of Lines and Characters Standard Gray 800MR-W00 1 Line, 12 Characters 800MR-W00E plus Custom Text Large Gray 800MR-W100 2 Lines, 12 Characters 800MR-W100E plus Custom Text Standard Red 800MR-W600 1 Line, 12 Characters 800MR-W600E plus Custom Text Large Red 800MR-W6100 2 Lines, 12 Characters 800MR-W6100E plus Custom Text Extra Large Legend Plates An adapter ring is available for ulletin 800MR push buttons when used with ulletin 800T legend plates. rder 800MR-N50. Refer to Approximate Dimensions for dimension requirements. 800MR-W645 800MR-W646 800MR-W647 800MR-W130 800MR-N50
Format Format Large Size with Adapter Ring (lank) 800MR-W645 For Push-Pull only Push Stop Pull Start Round with Adapter Ring (lank) 800MR-W646 Adapter Ring Used with ulletin 800T Legend Plates 800MR-W130 800MR-N50 Pre-printed includes Adapter Ring ( 800MR-N50) Push to Stop Twist or Pull Release 800MR-W647 To use the ulletin 800T legend plates with ulletin 800MR devices, use adapter ring ( 800MR-N50). ul. 800M Special Legend Inserts Special legend inserts are available. To order, specify 800MS-WC00E and marking required. A maximum of nine characters per line: one or two lines 0.140 in. high characters; three or four lines 0.110 in. high characters. ul. 800M acklit Legends The table lists standard legend markings that are available. To order legend insert only, add the suffix of the legend to 800MS-WC. Example: 800MS- WC03 would be a FAST legend insert only. Marking Suffix Marking Suffix Marking Suffix Marking Suffix CLSE 01 LW 05 RESET 15 UP 22 DWN 02 LWER 11 REV 16 1ST SPEED 25 FAST 03 FF 09 RUN 17 2ND SPEED 26 FRWARD 23 N 10 SLW 18 3RD SPEED 27 HIGH 04 PEN 13 START 19 4TH SPEED 28 IN 06 UT 12 STP 20 0 40 INCH 07 PUSH-T-TEST 29 EMERG STP 24 1 41 JG 08 RAISE 14 TEST 21
Electrical Ratings Contact Ratings Dielectric Strength Electrical Design Life Cycles Refer to the Contact Ratings tables below. 1600V for one minute 1300V for one minute (Logic Reed) 750 000 at maximum rated load 200 000 at maximum rated load (Logic Reed) Mechanical Ratings Vibration Shock Degree of Protection 10 2000 Hz 1.52 mm displacement (peak-to-peak) Max./10 G Max. (except Logic Reed) 1/2 cycle sine wave for 11 milliseconds 25 G (contact fragility) and no damage at 100 G Type 13; IEC I44 IP65 iltight Mechanical Design Life Cycles Push uttons Potentiometers All other devices Contact peration 1 000 000 minimum 100 000 minimum 200 000 minimum Contact blocks with ifurcated spanner:slow make and break, simple break. Logic Reed Contact locks:snap-action Typical perating Forces perators without contact blocks 2.45 lb (10.8 N) Push-Pull Units 8 lb (35.3 N) push to in position 4 lb (17.7 N) maximum pull to out position Contact locks Standard 1.5 lb (6.7 N) Logic Reed 0.616 lb (2.6 N) Environment Temperature Range perating 32 131 F (0 55 C) Storage -40 +185 F (-40 +85 C) Note:perating temperatures at +32 F (0 C) are based on the absence of freezing moisture and liquids. Humidity Panel Thickness Requirements 50% at 104 F (40 C) 1/16 1/4 in. (1.6 6.4 mm) Performance Data See Performance Data. Standard Contact Ratings (IEC 337-1) (NEMA ICS 2-125) Maximum continuous current I th 10 A. ulletin 800M units have control circuit ratings with 800M contact blocks as follows: Maximum perational Volts Ue Utilization Category Rated perational Currents IEC NEMA Volts Ue Make reak AC 300 AC-II A300 120 300 7200 VA 720 VA 72 120 60 VA 720 VA 24 72 60 A 10 A For applications below 24V and 24 ma, Logic Reed contacts are recommended. Logic Reed Contact Ratings Maximum: 150V AC, 0.15 A, 8 VA and 30V DC, 0.06 A, 1.8 VA. Should only be used with resistive loads. Wire Capacity Stab Termination Contact locks Accepts two 0.110 x 0.032 in. push-on connectors or one 0.250 x 0.032 in. push-on connector. Small Screw Contact locks Accepts one #14 or two #16 AWG solid or stranded wires. Large Screw Termination Contact locks Accepts two #12 AWG solid or stranded wires. Dimensions in inches (millimeters). Dimensions are not intended to be used for manufacturing purposes. ul. 800MR Extension in Front of Panel
Round Push utton Flush, Extended and Illuminated Extended Round Push utton Illuminated Flush Round Push utton Mushroom Round Selector Switch and Potentiometer and Standard Knob Panel Wobble Stick Unit Round Selector Switch and Potentiometer and Wing Lever Round Cylinder Lock Selector Switch Round Push-Pull Twist or Pull Release Units ul. 800M Front View of Square Units CAUTIN: To avoid possible excessive heat, clusters of nine or more continuously illuminated units mounted in a small enclosure should be spaced at 1-1/2 in. (38.1 mm) minimum centers in one direction. Unit without Insert and acklit Unit Square acklit with Guarded ezel Square acklit with Unguarded ezel Dual perator Unit ul. 800M Extension in Front of Panel Square Push utton Flush and Extended Square Push utton Large Extended Square Push utton Dual perator Dimensions in inches (millimeters). Dimensions are not intended to be used for manufacturing purposes. Extension ehind Panel Units with Quick Connect Terminal Contact locks (Typical View) Units Having Screw Terminals with Pressure Plate Contact locks (Typical View) Units Having Large Screw Terminals with Pressure Plate Contact locks (Typical View) 1/16 1/4 in. (1.6 6.4 mm)
Dimension A Description Push utton Pilot Light Sel. Switch Cyl. Lock Pot. Push-Pull or Twist Release Push utton Pilot Light Sel. Switch Cyl. Lock Pot. Push-Pull or Twist Release Units with Quick Connect Terminals Units Having Small Screw Terminals with Pressure Plates Non-Illuminated 2-1/4 (57.2) 2-15/32 (62.7) 3-1/2 (88.9) 2-1/32 (51.6) 2-3/4 (69.8) 2-5/16 (59) 2-17/32 (64.3) 3-9/16 (90.5) 2-1/32 (51.6) 2-13/16 (71.4) Illuminated Full Voltage 2-1/4 (57.2) 2-1/4 (57.2) 2-15/32 (62.7) 2-3/4 (69.8) 2-25/32 (70.6) 2-25/32 (70.6) 2-17/32 (64.3) 2-13/16 (71.4) Transformer 2-23/32 (69.1) 2-23/32 (69.1) 2-29/32 (73.8) 3-3/32 (78.6) 2-25/32 (70.6) 2-25/32 (70.6) 2-31/32 (75.4) 3-5/32 (80.1) Non-Illuminated Units Having Large Screw Terminals with Pressure Plates 2-45/64 (68.6) 2-59/64 (74.2) 3-15/16 (100) 3-13/64 (81.4) Illuminated Full Voltage 3-11/64 (80.6) 3-11/64 (80.6) 3-23/64 (85.3) 3-13/64 (81.4) Transformer 3-11/64 (80.6) 3-11/64 (80.6) 3-23/64 (85.3) 3-35/64 (90.1) Approximate Mounting Dimensions Caution: Shipping Weights in unces (kg) Type of Unit Weight Type of Unit Weight Push uttons Non-Illuminated 3-1/4 (0.09) Selector Switches Non-Illuminated 4 (0.11) Illuminated Full Voltage 3-1/2 (0.10) Illuminated Full Voltage 4 (0.11) Transformer 5 (0.14) Transformer 5-1/2 (0.16) Pilot Lights Pilot Light 2-1/4 (0.06) Push-Pull Units Non-Illuminated 4-1/2 (0.13) Push-to-Test 3 (0.09) Pilot Light 4-1/2 (0.13) Illuminated Full Voltage 4-1/2 (0.13) Push-to-Test 5 (0.14) Transformer 5-1/2 (0.16) Cylinder Lock 6 (0.17) Potentiometer Units 4 (0.11) 800MR-N6
Dimensions in inches (millimeters). Dimensions are not intended to be used for manufacturing purposes. Legend Plates Standard Half Round Small/Large Legend Plate Rockwell Automation, Inc. All Rights Reserved.