AMADA MACHINE TOOLS EUROPE

AMADA MACHINE TOOLS EUROPE PRODUCT OVERVIEW MILLING TECHNOLOGY THV DUPLEX MILLING MACHINES PMH PLATE MILLING MACHINES

AMADA MACHINE TOOLS Headquarters in Japan (Isehara) High-tech Development Centre near Mount Fuji: Fujinomiya Works New production site in Toki, Japan AMADA GROUP The AMADA Group is one of the leading international machine tool manufacturers with more than 6,000 employees throughout the world and a turnover of approx. 2 billion euros. AMADA technologies are trend-setting production solutions to obtain a high level of economic efficiency and productivity while ensuring maximum environmental compatibility. One of the main objectives for the years to come is the large-scale expansion of the group s machine tool technology. To achieve this goal, Amada has already established a new organization back in 2009, AMADA Machine Tools Europe. As a Total Solution Provider, this company is guided by the individual customer needs. The same philosophy is already used in the development of new machines to meet the ever increasing demands of a Total Solution Provider. AMADA environmental awareness AMADA has developed a long-term environmental plan AMADA Green Action to the ongoing promotion and preservation of the environment. In the development of new products, reduction of energy and resources are taken into account. New production facilities, such as the new plant in Toki, will be built according to these guidelines and operate under strict compliance with the conservation of resources. New production site in Toki, Japan 2 / 3 On a total area of 156,000 sqm, a state-of-the-art manufacturing plant including an R&D Centre was built in Toki, Japan. Here, AMADA is manufacturing high-tech turning, grinding and sawing machines. The plant has been designed based on stringent ecological demands and is intended to realize the Zero Emission concept. Using state-of-the-art and environmentally sound energy conservation, high-precision grinding and turning machines are produced here for the global market. The Technical Centre being part of the plant will be used as a communication platform.

Technical Centre in France AMADA Machine Tools Europe European Headquarters in Haan, Germany Technical Centre in Italy AMADA MACHINE TOOLS EUROPE In order to further the development, based on more than 70 years of AMADA s experience in the manufacture of high precision machine tools and to strengthen AMADA s position in the important European market and in a sustained manner. AMADA Machine Tools Europe GmbH was established in 2009 to unite several established brands (including WASINO). The change of name is intended to promote global development and to consolidate the brand AMADA. AMADA Machine Tools Germany: the European Headquarters In order to enable advancement, AMADA Machine Tools invests in high-tech locations for development and production. In 2010, the Technical Centre in Haan, near Düsseldorf was opened. AMADA Machine Tools France The Technical Centre for AMADA machine tools and AMADA sheet metal processing branches is located in close proximity to Paris. AMADA Machine Tools Italy In May 2010, the Technical Centre in Vigolzone, Piacenza was opened as the base for the AMADA machine tools and AMADA sheet metal processing branches. AMADA Machine Tools today More than 1,000 employees world-wide Production of grinding, turning, milling and sawing machines More than 100,000 installed machines world-wide

DUPLEX MILLING MACHINES THV SERIES Working area of the THV-150 Material stop FANUC control unit THV series THV-150 Proven concept in series For quite a long time, the concept of the THV duplex milling machine offered as a series machine has proven itself in the Asian market. The production advantages offered by the THV are utilized by companies in the tool steel industry, by manufacturers of supply parts for engineering and by companies working in the energy, transportation, automotive and aerospace sectors. Economic duplex milling for higher cost effectiveness The high-productivity THV-series duplex milling machines enables fully automatic plate machining in one material set-up. Resulting in high angular accuracy and parallelism of the finished workpiece and a considerable reduction of the cycle time. Compared to conventional one-head milling machines, duplex milling with the THV series machines offers e.g. the following benefits: 4 / 5 shorter handling times low error rate due to automatic material width calibration Automatic indexing of the workpiece achieves high accuracy userfriendly operation

Chamfering Machining steps External measuring table THV-430 The THV-430 has been designed for high-quality machining of plates measuring up to 430 x 430 mm and with a maximum height of 190 mm (option). In most applications, further machining is not required due to the extremely high surface finish of the machined parts. Userfriendly operation Easy to operate using interactive control. For setting up the automatic manufacturing process, only input of initial dimension, finished dimension and material grade are required. NC and cutting skills are not needed. CNC control for userfriendly operation The THV is equipped with the E.C.O.S operating system. It simplifies the operation of the machine to such an extent that even untrained staff can work with the machines of the THV series in an easy and controlled manner.

DUPLEX MILLING MACHINES THV SERIES Material support of the THV-800 ø250 mm milling head of the THV-800 Patent-registered material clamping side machining Picture without standard guard THV-800 Innovative, patent-registered material clamping 6 / 7 The material is clamped by a hydraulic clamping system. The workpiece fixture and the appropriate material supports can be easily changed. The correct workpiece fixture for the material size to be machined is displayed after entering the the material data. A keyway on the fixture ensures the correct selection.

Patent-registered material clamping chamfering Material stop Picture without standard guard THV-1000 Easy workpiece handling by means of automatic positioning and measuring devices Correct loading of the workpiece into the working area is simplified by one front and one lateral stop plate. After the material size has been entered, the workpiece is automatically fed. Before machining is started, a touch probe automatically checks the workpiece width.

DUPLEX MILLING MACHINES THV SERIES Picture without standard guard THV-1200 High angular accuracy and parallelism achieved by duplex milling heads Before the machining process, the workpiece has to be centered on the rotary table. In doing so, the duplex mill can machine the two opposite sides of the material simultaneously. The Automatic Centering System ensures smooth two-side machining and guarantees a high angular accuracy and parallelism of the workpiece. The cutting conditions are stored in the control unit. However, they can also be replaced by customized values. 8 / 9

Material fixture for bar stock front view Lateral view Material support with patent-registered indexing unit Picture without standard guard THV-1200 (30-T) The THV-T series has been developed to enable the customer to cover the whole product range with one machine both for precision-plate and bar stock machining. For both applications an automatic material stop system simplifies the set-up of the machine. Bar stock machining (T series) For the machining of bar stock with a length of up to 3000 mm, two additional work tables are used to support the material. Four material fixtures are automatically used. Just as in plate machining, the bar stock is aligned by means of a 1080 mm long stop plate which automatically adapts to the actual dimension during machine set-up. The bridge for the upper material clamping can be adjusted from a central control station. Thus, machine set-up is quick and easy.

ADVANTAGES OF DUPLEX MILLING THV series SHORTER CYCLE TIMES Example: THV-430 Duplex milling machine THV-430 Conventional milling machine Operating steps 1 4 Milling time approx. 4 min approx. 20 min Total time [incl. preparation and set-up] approx. 10 min up to 45 min* * Set-up time for the conventional milling machine includes the time required for data entry, material set-up changes and precise calibration. This depends on the skills of the operator. THV-430 Conventional milling machine 20 min 15 min 10 min 5 min 0 min [Milling time] approx. 5 times faster! Machine parameters THV-430 (2 x 11 kw) Material C45 Mill diameter (mm) ø 160 Cutting inserts (number) 8 Spindle speed (rpm) 300 Feedrate (mm/min) 480 Cutting width (mm) 150 Cutting depth (mm) 2.0 10 / 11

Maximum efficiency Conventional milling machine Duplex milling machine Operating cost Productivity & ease of operation Accuracy MAXIMUM PRECISION Angular accuracy Parallelism Duplex milling machines offer both high performance and maximum precision. Accuracy Allowable tolerance (mm) Achieved value (mm)* Parallelism A-C Angular accuracy of the sides in relation to each other (faces A B C D) Angular accuracy of the sides in relation to face E * Values have been achieved by using the THV-430. Less than 0.02 mm over a measuring length of 300 mm Less than 0.02 mm over a measuring length of 300 mm Less than 0.03 mm over a measuring length of 100 mm 0.006 mm 0.007 mm 0.010 mm

TECHNOLOGY AND SCOPE OF DELIVERY THV SERIES Touch probe Z stop Y stop Workpiece Workpiece Workpiece positioning (patent-registered) Automatically positioned stops simplify workpiece set-up. All the operator has to do is load the workpiece, push it against the stops and clamp it. Workpiece calibration (patent-registered) Automatic examination of the entered workpiece dimensions and calculation of the workpiece center. Then the milling heads automatically move to the optimum position. This function is called Automatic Centering System. Without Automatic Centering System Without automatic centering, only one side might be machined. Center unmachined side Center machined side The Automatic Centering System enables the two milling heads to always have the same distance to the workpiece and thus to mill with the same cutting depth. Center With Automatic Centering System Center same cutting depth 12 / 13

hydraulic workpiece fixture Hydraulic clamping system Workpiece fixture Hydraulic clamping system (patent-registered) The hydraulic clamping unit can be adjusted in several step. It guarantees safe clamping throughout the machining process. Workpiece fixture Fixtures for all allowable workpiece sizes are supplied with the machine. HIGH-PRECISION AND HIGH-PRODUCTIVITY PLATE MILLING Milling with the duplex milling machine Process description: 1. Workpiece clamping performed by the operator 2. Automatic calibration and synchronous milling of the sides A-C 3. Automatic indexing of the workpiece by 90 4. Automatic calibration and synchronous milling of the sides B-D 5. Optional chamfering in automatic mode Shorter downtime, higher machining precision, lower production cost Mill Mill Mill Plan view Mill Rotary table Rotary table Rotary table Rotary table

PLATE MILLING MACHINE PMH series ø525 mm milling head Automatic measuring system Input screen of PMH-1308 Picture without standard guard PMH-1308 14 / 15 The sturdy-design AMADA PMH-1308 has a milling head with a diameter of 525 mm and can be used for machining dimensions of up to 1300 x 800 mm. Plates with a width of up to 500 mm can even be milled in one pass. This reduces the cycle times and ensures extremely high surface finishes.

Tool measuring system Conventional machine with ø60-150 mm milling head PMH series with ø525 mm milling head SPECIAL MILLING HEAD TECHNOLOGY Conventional milling with small milling heads When milling plates using small milling heads, several milling processes are required. This may cause steps and strain in the material. For such machining, well-founded cutting experience and complex NC programming are required. Milling using the PMH-1308 The PMH-1308 has a 525 mm sized milling head, allowing plates with a width of up to 500 mm to be milled in one pass. Material surfaces obtained therefore have no transitions or steps. High machining quality Measuring point Measuring result* 1 1 0.0137 mm 2 0.0169 mm Parallelism 2 Measuring point Upper to lower surface Measuring result* 0.0192 mm Flatness Type Size* Ra 0.40 µm Ry 2.87 µm Rz 2.10 µm * Material ST52 245 x 245 x 23 mm Surface finish

TECHNOLOGY AND SCOPE OF DELIVERY PMH SERIES Lateral view of face mill Large high-capacity milling head is able to offer more benefits than merely shorter cycle times Apart from reduced cycle times, milling with the large milling head (Ø525 mm) has enormous benefits regarding workpiece quality: Inclined milling head no chatter marks whatsoever equally distributed thermal load excellent surface finish As the machines of the PMH series have been especially designed to mill P plates, the milling head is positioned with a minimum inclination in relation to the workpiece. Torque almost 3 times as high as on conventional milling machines By default, the PMH-1308 is equipped with a high-capacity spindle with JIS No. 60 taper. On comparable conventional milling machines and machining centers, the spindle size corresponds to JIS No. 40 or JIS No. 50. A conventional milling machine with a driving power of 22.4 kw and a No. 50 spindle e.g. generates a torque of 600 Nm, whereas the PMH-1308 with the same power of 22.4 kw and a No. 60 spindle having a high-capacity gear unit is able to generate a torque of 1660 Nm. Torque Nm 1600 1660 Nm 50 % ED Output kw 1400 1200 1396 Nm 22 kw (50 % ED) 22,0 20,0 18,5 1000 800 No. 40 No. 50 No. 60 600 400 200 60 min 1 126 min 1 10,5 8,8 0 0 50 100 150 200 250 min 1 16 / 17

Specifications of milling technology Overview of options External measuring table Bar code 5 indexing table Expanded material magazine Increased spindle power Spindle cooling system THV-150 x x THV-430 x x x x x x THV-800 x x x THV-1000 x x THV-1200 x x THV-800 (20-T) x x x THV-1200 (30-T) x x Specifications Workpiece dimensions max. (L x W x H) Workpiece dimensions min. (L x W x H) Workpiece weight max. Power Machine weight Milling heads THV-150 150 x 150 x 52 mm 7 x 7 x 7 mm 20 kg 2 x 5,5 kw 2200 kg Ø 63 mm THV-430 (160) 435 x 435 x 150 mm 20 x 20 x 10 mm 230 kg 2 x 11 kw 6000 kg Ø 160 mm THV-430 (200) 435 x 435 x 190 mm 20 x 20 x 10 mm 290 kg 2 x 11 kw 6500 kg Ø 200 mm THV-800 810 x 810 x 230 mm 70 x 70 x 10 mm 1200 kg 2 x 11 kw 8500 kg Ø 250 mm THV-800 (20-T) (plate) 800 x 800 x 230 mm 40 x 40 x 10 mm 1200 kg 2 x 11 kw 8500 kg Ø 250 mm (Flat bar steel) 2000 x 800 x 230 mm 600 x 40 x 10 mm 3000 kg 2 x 11 kw 13000 kg Ø 250 mm THV-1000 1020 x 1020 x 400 mm 120 x 120 x 10 mm 3500 kg 2 x 22 kw 20000 kg Ø 425 mm THV-1200 1220 x 1220 x 400 mm 320 x 320 x 10 mm 4500 kg 2 x 22 kw 28500 kg Ø 425 mm THV-1200 (30-T) (plate) 1200 x 1200 x 230 mm 250 x 250 x 10 mm 2500 kg 2 x 11 kw 20000 kg Ø 250 mm (Flat bar steel) 3000 x 1200 x 230 mm 1200 x 80 x 10 mm 6000 kg 2 x 11 kw 23000 kg Ø 250 mm Specifications Workpiece dimensions max. (L x W x H) Workpiece weight max. Power Machine weight Milling heads PMH-1308 1300 x 800 x 300 mm 3500 kg 22 kw 9000 kg Ø 525 mm PMH-3015 3000 x 1500 x 350 mm 13000 kg 30 kw 22000 kg Ø 525 mm PMH-4020 4200 x 2010 x 400 mm 15000 kg 30 kw 35000 kg Ø 525 mm * Subject to alterations

EXPERIENCE TECHNOLOGY IN ACTION TECHNOLOGY Technology by AMADA Machine Tools Europe GmbH AMADA Machine Tools Europe considers itself to be the first contact for customers and prospects as regards technical matters. Experience grinding, turning, milling and sawing technologies in action, discuss your requirements with skilled engineers, look for ideas and benefit from solutions. The latest machines, precision measuring equipment, and related accessories are available to work on the ideas and concepts and test them immediately. The Technical Center is available for individual customer visits and themed events with customers and suppliers. It is the active communication platform for interaction between users, suppliers and developers. 18 / 19

APPLICATION ENGINEERING AMADA Machine Tools Europe Application AMADA MACHINE TOOLS EUROPE supports the customer throughout the whole investment decision-making process. In our Technical Centre, we calculate the job times and we discuss the process analysis results with our customers. A separate room for precision measuring enables the results to be verified immediately. SERVICE AMADA Machine Tools Europe Service AMADA MACHINE TOOLS EUROPE provides tailor-made service support for the complete operating life of your turning, grinding, milling and sawing machines. Our proficient service staff will help you to use your machine in the most efficient manner. Our comprehensive service network guarantees fast availability of a service technician and reduced idle times of your machine tool. Spare parts warehouses in Haan and Wertheim shorten the delivery times to the minimum. With AMADA MACHINE TOOLS original spare parts, you will reach maximum reliability.

AMADA MACHINE TOOLS EUROPE Germany AMADA MACHINE TOOLS EUROPE GmbH Amada Allee 3 42781 Haan Tel.: +49 (0) 2104 177 70 Mail: info@amadamachinetools.de www.amadamachinetools.de France AMADA MACHINE TOOLS EUROPE GmbH France ZI PARIS Nord II, 96 Avenue de la Pyramide 93290 Tremblay-en-France Tel.: +33 (0) 149 903 094 Mail: info@amadamachinetools.fr www.amadamachinetools.fr Italy AMADA MACHINE TOOLS EUROPE GmbH Italy Via Amada I., 1/3 29010 Pontenure (Piacenza) Tel.: +39 0523 872 311 Mail: info@amadamachinetools.it www.amadamachinetools.it Russia AMADA OOO Dokukina Street 16, Building 3, 5F Moscow 129226 Tel.: +7 495 518-99-03 Mail: info@amadamachinetools.de www.amadamachinetools.ru The cutting performance data in this catalogue is affected by material, tooling and cutting conditions. Technical changes reserved. AMADA MACHINE TOOLS EUROPE GmbH 03/2013