Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) P(V) P(V)HF. (MAX.) P PHF P88 P88HF. (MAX.) P PHF P PHF P8HF (MAX.) E.FP E.FP Features. Nominal mated height of.9 or.mm,.mm (Max.. or.mm,.mm)(fig.). Small mounting area The receptacle occupies an area of.mm.. ight weight Receptacle:.mg. Supports high frequency up to GHz To meet the frequency requirements of a wide variety of miniature devices, the connectors offer high frequency performance from DC to GHz, with a V.S.W.R. of. to. max.. Automatic board placement Packaged on tapeandreel the receptacles can be placed with vacuum nozzles of the automatic placement equipment.. Plugs are terminated with ultrafine coaxial (fluorinated resin insulated) cable Standard ultrafine coaxial cable of.8mm diameter (single braid shielding) is used for the plug termination, assuring secure and stable connections.. Simple connector mating / unmating Use of available extraction tool assures correct disconnection of the plug and receptacle. 8. Verification of the fully mated condition Tactile click sensation confirms fully mated condition, assuring complete electrical and mechanical connection. 9. Halogenfree*(Receptacle,plug(HF type)) *As defined by IEC9 Br9 ppm maximum, Cl9 ppm maximum,cl+br combined, ppm maximum Applications Mobile phones, wireless communication devices, electronic measuring instruments, GPS, wireless AN, Bluetooth and any application requiring high frequency transmission using small coaxial connectors.. (. Max). (. Max).9 ( Max). (. Max). (. Max) Plug Plug Plug Plug Plug E.F Space Factor of Mated Connector P PHF RSMT P PHF P8HF RSMT P(V) P(V)HF RSMT P PHF RSMT P88 P88HF RSMT Dia.8 Dia. Dia. Dia.8 Dia. Dia. Fig. Fig..e
Series Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Product Specifications Ratings Nominal characteristic impedance Frequency range ohms DC to GHz Operating temperature range Operating humidity C to +9 C 9%RH max. Storage temperature range Storage humidity Item Specification Conditions. Contact resistance Center : m ohms max. ma max. Outer : m ohms max.. Insulation resistance M ohms min. V DC C to + C 9%RH max.. Withstanding voltage No flashover or insulation breakdown. V AC / minute. V.S.W.R.*. Durability (mating / unmating, with corresponding plug). Vibration. Shock 8. Humidity (Steady state) 9. Temperature cycle Part No. Up to GHz to GHz P* dia..8mm Coaxial Cable Assembly. Max. Max P(V)* dia..8mm Coaxial Cable Assembly. Max. Max P8* dia..mm Coaxial Cable Assembly. Max. Max P* dia..mm Coaxial Cable Assembly. Max. Max P* dia.mm Coaxial Cable Assembly. Max. Max P88* dia..mm Coaxial Cable Assembly. Max. Max Contact resistance Center : m ohms max. Outer : m ohms max. No electrical discontinuity of µs min. No damage, cracks or parts dislocation. No damage, cracks or parts dislocation. Insulation resistance M ohms min.(humidity high) Insulation resistance M ohms min.(dry) No damage, cracks or parts dislocation. Contact resistance: m ohms max. (Center) m ohms max. (Outer) cycles Frequency: to Hz, single amplitude of.mm, acceleration of 9m/s, for cycles in the direction of each of the axis. Acceleration of m/s, ms duration, sine halfwave waveform, cycles in each of axes. 9 hours at temperature of ç and humidity of 9%. Temperature: C/+ to + C/+9 C/+ to + C Time: min. / min. / min. / min. cycles. Salt spray No excessive corrosion % salt water solution, 8 hours *V.S.W.R. Measurement System The above V.S.W.R. standard values were measured using the measurement connection shown below. Material Plugright angle Note : Cable type connectors were measured with SMA conversion adapters attached to both ends of the harness product of a suitable cm cable. Note : Board type connectors were mounted to a ø glass epoxy board and measurements were conducted with SMA conversion adapters attached. Part Material Finish/Remarks Shell Phosphor bronze Silver plated PBT, Color: Black U9V(,, P(V),, 88) Insulator PBT, Color: Gray U9HB(P(V)HF) CP, Color: Milkywhite U9V(HF,HF, 8HF, HF, 88HF) Female center contact Phosphor bronze Gold plated Receptacle Part Material Finish/Remarks Shell Phosphor bronze Silver plated Insulator CP, Color: Milkywhite U9V Male center contact Brass Gold plated
Series Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Receptacles GND GND B Recommended PCB Mounting Pattern.. (.)..8 Ø.. SIG RSMT Part No. HRS No. Packaging Weight / EA RoHS RSMT() pcs/pack RSMT(), pcs/reel./mg RSMT(8) 8, pcs/reel Note: This area may be covered by insulating material. Embossed Carrier Tape Dimensions(IEC 8 compliant).. Embossed Carrier Tape Dimensions 8 Ø. Center contact.max(note) GND.±. ±. No conductive traces in this area ±..9±. Reel Dimensions Material PS(Black) SIG ±. GND.±.. RSMT(): 8mm pitch A.. Ø. Center contact A(SCAE FREE) Unreeling direction RSMT(8): mm pitch
Series Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Cable Assembly (Plug) Part No. Size Mated Height Applicable cable Cable Guide Description Dia..8mm Coaxial Cable Dia..mm Coaxial Cable Dia..mm Coaxial Cable Dia.mm Coaxial Cable.9 Cable Type 8 P PHF.mm Max. (.mm Nom.) Dia..8mm Inner Conductor * /. SA (AWG#) /.8 SA (AWG#) /.8 SA (AWG#) /. SA (AWG#).9 P PHF P8HF Dielectric Diameter Dia..mm Dia..8mm Dia..mm Dia..mm Outer Conductor * Single Shield TA Single Shield TA Double Shield TA Tape, single Shield TA Cable Specification Jacket Diameter Dia..8mm Dia..mm Dia..mm Dia.mm Dia..mm /. SA Dia..88mm Single Dia..mm 88 Coaxial Cable (AWG#) Shield TA Dia..mm /. SA Dia..88mm Tape, Single Dia..mm 88 Coaxial Cable (AWG#) /PTEE Shield TA (data as provided by cable suppliers, for reference only) * SA : Silver plated annealed copper wire, TA : Tin plated annealed copper wire.mm Max. (.mm Nom.) Dia..mm and Dia..mm P(V) P(V)HF().8...mm Max. (.9mm Nom.) P() PHF().8.8.mm Max. (.mm Nom.) Flame Retardant Grade.8 Nominal attenuation At GHz At GHz.dB/m.dB/m.8dB/m.dB/m.8dB/m.dB/m P88() P88HF().mm Max. (.mm Nom.) Dia..8mm Dia. mm Dia..mm Weight (mg) 9. Environmental compliant The article excellent end HF other than halogenfree, it only as for RoHS compliant VW 9.dB/m.dB/m.dB/m.dB/m.dB/m.dB/m [Plugs can be ordered only as terminated cable assemblies.]
Series Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height How To Specify Cable Assembly [Doubleended cable assembly] [Singleended cable assembly] Ordering information Ordering information Used plug: P(V), P(V)HF() P, PHF(Dia..8mm) P HF N TV A q Series name w Assembly type P HF N TV A e Environmental compliant r Cable type t Cable color y Cable outer conductor u Total length(mm) Used plug: P, P8HF(Dia..mm) q Series name w Assembly type P HF 8N T A P HF 8N T A e Environmental compliant r Cable type t Cable color y Cable outer conductor u Total length(mm) q Series name w Assembly type P HF N A e Environmental compliant r Cable type t Cable color y Total length(mm) P: Single ended PV: Plug(V) Single ended P: Double ended PV plug(v) Double ended HF: Halogenfree : RoHS compliant N: Dia..8mm Ultrafine coaxial cable : White, : Black TV: Tin plated braided wire ength() P: Single ended P: Double ended HF: Halogenfree : RoHS compliant 8N: Dia..mm Ultrafine coaxial cable : Gray, : Black, : White T: Tin plated braided wire ength() P: Single ended P: Double ended HF: Halogenfree : RoHS compliant N: Dia..mm Ultrafine coaxial cable : Gray, : Black ength() Used plug: P(), PHF()(Dia.mm) q Series name w Assembly type P HF N D A Standard tolerances for () P HF N D A e Environmental compliant r Cable type t Cable color y Cable outer conductor u Total length(mm) Double Single Double Single Used plug: P, PHF(Dia..mm) Double P HF N A Single Double Single Used plug: P88(), P88HF()(Dia..mm) Double P HF 88K T A Single q Series name w Assembly type e Environmental compliant r Cable type P HF 88K T A t Cable color y Cable outer conductor u Total length(mm) ()(mm) P: Single ended P: Double ended HF: Halogenfree : RoHS compliant N: Dia.mm Ultrafine coaxial cable : Gray, : Black, : White D: Copper tape+ Tin plated braided wire ength() P: Single ended P: Double ended HF: Halogenfree : RoHS compliant 88K: Dia..mm Ultrafine coaxial cable 88N: : Gray, : Black, : White T: Tin plated braided wire PD: Copper tape + Tin plated braided wire ength() Standard Tolera(mm) *= to ± = to ±8 = to ± =onger than ±.% of () Note: Minimum available length() is mm
Series Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Conversion Adapters SMA Conversion Adapter (Mating portion: side jack SMA side plug) (.) 8HEX Note: The side mating portions has a lower lock retention force than the regular product, therefore, cannot be used for purposes other than performance measurements. SMA Conversion Adapter (Mating portion: side plug SMA side jack) Note: The side mating portions has a lower lock retention force than the regular product, therefore, cannot be used for purposes other than performance measurements. SMA Conversion Adapter (Mating portion: side plug SMA side jack) Note: This connector is used by compressing the mated portion of side onto the RSMT portion. Receptacle to Inspection This receptacle is used for inspecting the continuity, withstand voltage, and other aspects of the harness product. Plug Extraction Tool This tool is used for extraction from a mating condition. HRMPJ(). (.). (8.) Ø. HRMJP() M. (). HRMJPST() 8.9 (.9) (.) HEX R (9) Ø. Note: Part No. PN for P//88. Part No. P(V)N for P(V)/P. Plug Insertion Tool This tool is for mating series plug into receptacle. PN 9 P(V)N 9 (.9) JAPAN 8 Ø For distinction with W.FPIN. PIN 9
Series Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Usage Precautions. Plugs () Mating / unmating ) To disconnect connectors, insert the end portion of PN and P(V)N under the connector flanges and pull off vertically, in the direction of the connector mating axis. Extraction Tool ) To mate the connectors, the mating axes of both connectors must be aligned and the connectors can be mated. The Cable Assembly "click" will confirm fully mated connection.do not attempt to insert on an extreme angle. RSMT () Pull forces on the cable after connectors are mated. () Precautions. Receptacles () Recommended reflow temperature profile () Recommended manual soldering () Recommended metal mask thickness After the connectors are mating, do not apply a load to the cable in excess of the values indicated in the diagram below. Do NOT forcefully twist or deform wires. [ç] 8 8 P Cable Assembly RSMT Manual soldering: C for seconds. to. mm Preheat ( to 8ç) seconds max. Time ç max. for seconds N max (P(V), P) N max (P, P, P88) ç ç seconds max. seconds max. N max (P(V), P) N max (P, P, P88) N max (P(V), P) N max (P, P, P88) q The temperature of the printed circuit board surface temperature at the points of contact with the terminals. w Reflow soldering should be performed at a printed circuit surface temperature of C max. e In individual applications the actual temperature may vary, depending on the solder paste type, volume / thickness and board size / thickness. Consuly your solder paste and equipment manufacturer for specific recommendations. () Reflow cycles times. Operating environment and storage conditions () Operating environment () Storage conditions Receptacle The connectors are not designed to operate in the following environments: Exposed to a excessive amounts of fine particles and dust Regions and places having a high density of sulfur dioxide, hydrogen sulfide, nitrogen dioxide or other corrosive gasses. Environments having large rapid variations in temperature. Store in the Hirose Electric packaging. Temperature: to +ç, Humidity: 8% max. Use within months of delivery. Receptacles for which the storage period has elapsed must be tested for solderability to the PC board mounting surface.
Series Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height SMA cable type SMA Straight Plug 8HEX /UNSB Straight Jack Panel mount Jack Panel mount Jack HRMPBN() 9 Dia..8 type HRMPBN() 9 Dia.., Dia.. type HRM88PBN() 8 Dia.., Dia..8 type Ø.. 8 9.. Ø. 8HEX HRMJBN() 99 Dia..8 type HRMJBN() 9 Dia.., Dia.. type HRM88JBN() 88 Dia.., Dia..8 type HRMPJBN() 9 Dia..8 type HRMPJBN() 9 Dia.., Dia.. type HRM88PJBN() 8 Dia.., Dia..8 type Ø. 9.. 8. 8. Ø. HRMPJBN() 9 Dia..8 type HRMPJBN() 88 Dia.., Dia.. type HRM88PJBN() 8 Dia.., Dia..8 type Panel mount Jack (Bulkhead). 8HEX.8.9 +. Ø Ø. +. HRMBPJBN() 9 Dia..8 type HRMBPJBN() 98 Dia.., Dia.. type HRM88BPJBN() 8 Dia.., Dia..8 type 8
Series Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Reverse polarity SMA Straight Jack. 8 8 HEX Panel mount Jack Panel mount Jack SMA(R)JBN 9 Dia..8 type SMA(R)JBN 9 Dia.., Dia.. type SMA(R)88JBN 9 Dia.. type. SMA(R)PJBN 989 Dia..8 type SMA(R)PJBN 9 Dia.., Dia.. type SMA(R)88PJBN 9 Dia.. type.. 9. 8. Ø. 9. 8 Ø. SMA(R)PJBN 99 Dia..8 type SMA(R)PJBN 99 Dia.., Dia.. type SMA(R)88PJBN 9 Dia.. type. Panel mount Jack (Bulkhead) 8 HEX..8 Panel cutout.9+. Ø Ø. +. SMA(R)BPJBN 9 Dia..8 type SMA(R)BPJBN 9 Dia.., Dia.. type SMA(R)88BPJBN 9 Dia.. type 9
Series Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height How To Specify Cable Assembly mm Ordering information HRM P N A q w e r t mm mm mm mm q Series name HRM : SMA type SMAR : Reverse polarity SMA w Connector type P : Plug J : Jack PJ : Panel mount Jack(Four screws) PJ : Panel mount Jack(Two screws) BPJ : Panel mount Jack(Bulkhead) e Cable type : Dia..8mm Coaxial cable : Dia..mm Coaxial cable 8 : Dia..mm Coaxial cable 88 : Dia..mm Coaxial cable r Cable color : White, : Black 8 88 : Gray, : Black t Total length(mm) ength() Note: Minimum available length() is mm
Series Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height SMA conversion adapter SMA Panel mount adapter.9. 9.. 8. Panel mount adapter Panel mount adapter(bulkhead) Ø Ø. HRMJJPA.9 9.. Ø. HRMJJPA 8.9 8 HEX..8 8 Ø. +.. Panel cutout.9 +. PCB mount adapter Panel cutout.8±.. 9.. HRMJJBPA Ø. +..8±..8 Part No. HRS No. Finish RoHS HRMJJPC Nickel plated HRMJJPC() Gold plated
Powered by TCPDF (www.tcpdf.org) Series Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Reverse polarity SMA Panel mount adapter.9.. 9. 8. Ø. Panel mount adapter Panel mount adapter (Bulkhead) Ø SMA(R)JJPA..9.9. 9. 9. Ø. SMA(R)JJPA 8 8 HEX.8 8 Ø. +.. Mounting pattern.9 +. SMA(R)JJBPA,Nakagawa Chuoh,TsuzukiKu,YokohamaShi 8,JAPAN TE: +8 Fax: +89 http://www.hirose.com http://www.hiroseconnectors.com The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of /. Contents are subject to change without notice for the purpose of improvements.