Mechatronics and Applications: An International Journal (MECHATROJ)
SCOPE OF THE JOURNAL Mechatronics and Applications: An International Journal (MECHATROJ) is a quarterly open access peer-reviewed journal that publishes articles which contribute new results in all areas of the Mechatronics and Applications. The journal focuses on all technical and practical aspects of Mechatronics Engineering Research, applications and Implementation techniques. The goal of this journal is to bring together researchers and practitioners from academia and industry to focus on understanding advances in mechanical design, computing, control systems, microprocessors, electronics and intelligent machines and establishing new collaborations in these areas. Authors are solicited to contribute to the journal by submitting articles that illustrate research results, projects, surveying works and industrial experiences that describe significant advances in the areas of Mechatronics and applications. Topics of interest include, but are not limited to the following. Topics of interest Automotive systems Autonomous systems Biomedical Engineering Control and Automation Design, Modeling and Simulation of Mechatronic systems Electrical Machines, Drives & Power Electronics Engineering and Automation Intelligent control Machine Design Manufacturing Engineering Measurement and Diagnostics Mechatronic Education Real-time Systems Robotics Signal Processing
Members of the Editorial Board Editorial Board Abdelkrim AID, Universite de Mascara, Algeria Alokesh Pramanik, Curtin University, Australia Amir Akramin Shafie Aashafie, International Islamic University Malaysia (IIUM), Malaysia Isa Maleki, Islamic Azad University, Iran Jose Dinis-Carvalho, Universidade do Minho, Portugal Krzysztof Stepien, Kielce University of Technology, Poland Monika Madej, Kielce University of Technology, Poland Muhammad Mahbubur Rashid, International Islamic University, Malaysia Pasupathy S.A, Kumaraguru College of Technology, India Putta Swamaiah, East West Institute of Technology, India Siamak hoseinzadeh, Islamic Azad University, Iran Sundararajan Natarajan, Indian Institute of Technology-Madras, India Ahmed Al-Salaymeh, The University of Jordan,Amman, Jordan Ali A.Badran, The University of Jordan, Jordan Nagahanumaiah, CSIR - Central Mechanical Engineering Research Institute, India Anush P, Anna University, India Roman Szewczyk, Industrial Research Institute for Automation and Measurements, Poland Maki Habib, The American University in Cairo, Egypt Ying, Benjamin, University of South Florida, USA Chithirai Pon Selvan, School of Engineering & Information Technology Manipal University, UAE Sidnei Buso, Universidade Paulista / São Paulo, Brazil Maki Habib, The American University in Cairo, Egypt Alberto Jardon Huete, Universidad Carlos III de Madrid, Spain Nilesh Kolhalkar, Pune University, India A.M.Mulla, Rajarambapu Institute of Technology, India S.Sreenatha Reddy, Guru Nanak Institute of Technology, India Elaya Perumal Ayyasami, Mahatma Gandhi Institute of Technology, India V. Pandurangadu, Guru Nanak Institute of Technology, India R.Uday Kumar, Mahatma Gandhi Institute of Technology, India Shuh Jing Benjamin, University of South Florida, USA M. Chithirai Pon Selvan, Manipal University, UAE S.M.Khot, Fr. C. Rodrigues Institute of Technology, India Eduardo Aoun Tannuri, University of São Paulo, Brazil Moussa BOUKHNIFER, ESTACA, France Du Baigang, Wuhan University of Technology, China Chun-Ta Chen, National Taiwan Normal University, Taiwan Xiaoqiang Tang, Tsinghua University, China Ramesh Balasubramanian, St. Joseph's Institute of Technology, India kkahn, University of Ulsan, South Korea
Members of the Editorial Board Editorial Board Belkacem OULD BOUAMAMA, University of lille, France S.M. khot, University of Mumbai, India Sidnei Buso, Universidade Paulista Objetivo, Brazil Saeed Sokhanvar, Helbling Precision Engineering, USA Shradha Patil, Fr. C. Rodrigues Institute of Technology, India Hunnekens, Eindhoven University of Technology, Netherlands David L Trumper, Massachusetts Institute of Technology, USA Raahul Krishna, Gharda Institute of Technology, India Kemao Peng, National University of Singapore, Singapore Maarten Steinbuch, Eindhoven University of Technology, Netherlands Ignacio Valiente, Universidad Carlos III de Madrid, Spain
Paper Submission & Manuscript preparation Guide Authors are invited to submit papers for this journal through E- mail: mechatrojjourna@airccse.com. Submissions must be original and should not have been published previously or be under consideration for publication while being evaluated for this Journal. For paper format download the template in this page Manuscript Template Review Process Submissions are accepted for review with the understanding that the same work has been neither submitted to, nor published in, another publication. Simultaneous submission to other publications will result in immediate rejection of the paper. Papers are not within the journal scope will be rejected immediately after the pre review process. All manuscripts will be subject to a well established, fair, unbiased peer review and refereeing procedure, and are considered on the basis of their significance, novelty and usefulness to the Journals readership. The reviewing structure will always ensure the anonymity of the referees & it will be reviewed by 3 experts in the field. The review output will be one of the following decisions: 1. Accept 2. Accept with minor changes 3. Weak Accept with major changes 4. Reject The review process may take approximately two ~three months to be completed. The Editor reserves the right to reject a paper if it does not meet the aims and scope of the journal, it is not revised well. Copy Right from After submitting final manuscript, you can get copy right form from AIRCC secretary Contact Us Here's where you can reach us mechatrojjournal@airccse.com