PDTC43X/23J/43Z/4YQA series 50 V, 0 ma NPN resistor-equipped transistors Rev. 30 October 205 Product data sheet. Product profile. General description 0 ma NPN Resistor-Equipped Transistor (RET) family in a leadless ultra small DFND-3 (SOT25) Surface-Mounted Device (SMD) plastic package with visible and solderable side pads. Table. Product overview Type number R R2 Nexperia PNP complement PDTC43XQA 4.7 k k DFND-3 PDTA43XQA PDTC23JQA 2.2 k 47 k (SOT25) PDTA23JQA PDTC43ZQA 4.7 k 47 k PDTA43ZQA PDTC4YQA k 47 k PDTA4YQA.2 Features and benefits 0 ma output current capability Reduced pick and place costs Built-in bias resistors Low package height of 0.37 mm Simplifies circuit design AEC-Q qualified Reduces component count Suitable for Automatic Optical Inspection (AOI) of solder joint.3 Applications Digital applications Controlling IC inputs Cost saving alternative for Switching loads BC847/BC857 series in digital applications.4 Quick reference data Table 2. Quick reference data Symbol Parameter Conditions Min Typ Max Unit V CEO collector-emitter voltage open base - - 50 V I O output current - - 0 ma
PDTC43X/23J/43Z/4YQA 50 V, 0 ma NPN resistor-equipped transistors 2. Pinning information Table 3. Pinning Pin Symbol Description Simplified outline Graphic symbol I input (base) 2 GND GND (emitter) 3 O output (collector) I 4 O output (collector) 4 3 R R2 O 2 GND aaa-09964 Transparent top view 3. Ordering information Table 4. Type number Ordering information Package Name Description Version PDTC43XQA DFND-3 plastic thermal enhanced ultra thin small outline SOT25 PDTC23JQA package; no leads; 3 terminals; body:..0 0.37 mm PDTC43ZQA PDTC4YQA PDTC43X_23J_43Z_4YQA_SER Nexperia B.V. 207. All rights reserved Product data sheet Rev. 30 October 205 2 of 22
PDTC43X/23J/43Z/4YQA 50 V, 0 ma NPN resistor-equipped transistors 4. Marking Table 5. Marking codes Type number Marking code PDTC43XQA 0 PDTC23JQA PDTC43ZQA 00 PDTC4YQA 0 4. Binary marking code description MARKING CODE (EXAMPLE) READING DIRECTION YEAR DATE CODE VENDOR CODE PIN INDICATION MARK MARK-FREE AREA READING EXAMPLE: 0 aaa-00804 Fig. SOT25 binary marking code description 5. Limiting values Table 6. Limiting values In accordance with the Absolute Maximum Rating System (IEC 6034). Symbol Parameter Conditions Min Max Unit V CBO collector-base voltage open emitter - 50 V V CEO collector-emitter voltage open base - 50 V V EBO emitter-base voltage PDTC43XQA - 7 V PDTC23JQA - 5 V PDTC43ZQA - 5 V PDTC4YQA - 6 V PDTC43X_23J_43Z_4YQA_SER Nexperia B.V. 207. All rights reserved Product data sheet Rev. 30 October 205 3 of 22
PDTC43X/23J/43Z/4YQA 50 V, 0 ma NPN resistor-equipped transistors Table 6. Limiting values continued In accordance with the Absolute Maximum Rating System (IEC 6034). Symbol Parameter Conditions Min Max Unit V I input voltage PDTC43XQA 7 +30 V PDTC23JQA 5 +2 V PDTC43ZQA 5 +30 V PDTC4YQA 6 +40 V I O output current - 0 ma P tot total power dissipation T amb 25 C [] - 280 mw [] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint. [2] Device mounted on an FR4 PCB, 4-layer copper, tin-plated and standard footprint. [2] - 440 mw T j junction temperature - 50 C T amb ambient temperature 55 +50 C T stg storage temperature 65 +50 C 500 aaa-07637 P tot (mw) 400 () 300 200 0 0-75 -25 25 75 25 75 T amb ( C) () FR4 PCB, 4-layer copper, standard footprint FR4 PCB, standard footprint Fig 2. Power derating curves PDTC43X_23J_43Z_4YQA_SER Nexperia B.V. 207. All rights reserved Product data sheet Rev. 30 October 205 4 of 22
PDTC43X/23J/43Z/4YQA 50 V, 0 ma NPN resistor-equipped transistors 6. Thermal characteristics Table 7. Thermal characteristics Symbol Parameter Conditions Min Typ Max Unit R th(j-a) thermal resistance from junction in free air [] - - 446 K/W to ambient [2] - - 284 K/W [] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. [2] Device mounted on an FR4 PCB, 4-layer copper, tin-plated and standard footprint. 3 aaa-07638 Z th(j-a) (K/W) 2 duty cycle = 0.75 0.50 0.33 0.20 0. 0.02 0.05 0.0 0 - -5-4 -3-2 2 3 t p (s) Fig 3. FR4 PCB, single-sided copper, tin-plated and standard footprint Transient thermal impedance from junction to ambient as a function of pulse duration; typical values 3 aaa-07639 Z th(j-a) (K/W) 2 duty cycle = 0.75 0.50 0.33 0.20 0. 0.05 0.02 0 0.0 - -5-4 -3-2 2 3 t p (s) Fig 4. FR4 PCB, 4-layer copper, tin-plated and standard footprint. Transient thermal impedance from junction to ambient as a function of pulse duration; typical values PDTC43X_23J_43Z_4YQA_SER Nexperia B.V. 207. All rights reserved Product data sheet Rev. 30 October 205 5 of 22
PDTC43X/23J/43Z/4YQA 50 V, 0 ma NPN resistor-equipped transistors 7. Characteristics Table 8. Characteristics T amb =25 C unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit I CBO collector-base cut-off V CB =50V; I E = 0 A - - 0 na current I CEO collector-emitter cut-off V CE = 30 V; I B =0A - - A current V CE = 30 V; I B =0A; T j =50 C - - 5 A I EBO emitter-base cut-off current PDTC43XQA V EB =5V; I C =0A - - 600 A PDTC23JQA - - 80 A PDTC43ZQA - - 70 A PDTC4YQA - - 50 A h FE DC current gain PDTC43XQA V CE =5V; I C =ma 50 - - PDTC23JQA V CE =5V; I C = ma 0 - - PDTC43ZQA V CE =5V; I C = ma 0 - - PDTC4YQA V CE =5V; I C = 5 ma 0 - - V CEsat collector-emitter saturation voltage PDTC43XQA I C =ma;i B =0.5mA - - 0 mv PDTC23JQA I C =5mA;I B =0.25mA - - 0 mv PDTC43ZQA I C =5mA;I B =0.25mA - - 0 mv PDTC4YQA I C =5mA;I B =0.25mA - - 0 mv V I(off) off-state input voltage PDTC43XQA V CE =5V;I C =0 A - 0.8 0.3 V PDTC23JQA - 0.6 0.5 V PDTC43ZQA - 0.6 0.5 V PDTC4YQA - 0.7 0.5 V V I(on) on-state input voltage PDTC43XQA V CE =0.3V; I C =20mA 2.5.5 - V PDTC23JQA V CE =0.3V; I C =5mA. 0.75 - V PDTC43ZQA V CE =0.3V; I C =5mA.3 0.9 - V PDTC4YQA V CE =0.3V; I C =ma.4 0.8 - V R bias resistor (input) [] PDTC43XQA 3.3 4.7 6. k PDTC23JQA.54 2.2 2.86 k PDTC43ZQA 3.3 4.7 6. k PDTC4YQA 7 3 k PDTC43X_23J_43Z_4YQA_SER Nexperia B.V. 207. All rights reserved Product data sheet Rev. 30 October 205 6 of 22
PDTC43X/23J/43Z/4YQA 50 V, 0 ma NPN resistor-equipped transistors Table 8. Characteristics continued T amb =25 C unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit R2/R bias resistor ratio [] PDTC43XQA.7 2. 2.6 PDTC23JQA 7 2 26 PDTC43ZQA 8 2 PDTC4YQA 3.7 4.7 5.7 C c collector capacitance V CB =V; I E =i e =0A; f=mhz - - 2.5 pf f T transition frequency V CE =5V; I C = ma; f = 0 MHz [2] - 230 - MHz [] See Section 8 Test information for resistor calculation and test conditions. [2] Characteristics of built-in transistor. PDTC43X_23J_43Z_4YQA_SER Nexperia B.V. 207. All rights reserved Product data sheet Rev. 30 October 205 7 of 22
PDTC43X/23J/43Z/4YQA 50 V, 0 ma NPN resistor-equipped transistors 3 h FE () 006aac84 I C (A) 0. 0.08 aaa-08579 0.70 ma 0.63 ma 0.56 ma 0.49 ma 2 0.06 0.42 ma 0.35 ma 0.28 ma 0.04 0.2 ma 0.02 0.4 ma - 2 I B = 0.07 ma 0 0 2 3 4 5 V CE Fig 5. V CE =5V () T amb = 0 C T amb =25 C T amb = 40 C PDTC43XQA: DC current gain as a function of collector current; typical values Fig 6. T amb =25 C PDTC43XQA: Collector current as a function of collector-emitter voltage; typical values 006aac842 006aac843 V CEsat V I(on) - () () Fig 7. -2 2 I C /I B =20 () T amb = 0 C T amb =25 C T amb = 40 C PDTC43XQA: Collector-emitter saturation voltage as a function of collector current; typical values Fig 8. - - 2 V CE =0.3V () T amb = 40 C T amb =25 C T amb = 0 C PDTC43XQA: On-state input voltage as a function of collector current; typical values PDTC43X_23J_43Z_4YQA_SER Nexperia B.V. 207. All rights reserved Product data sheet Rev. 30 October 205 8 of 22
PDTC43X/23J/43Z/4YQA 50 V, 0 ma NPN resistor-equipped transistors 006aac844 3 006aac845 V I(off) C c (pf) 2 () - - 0 0 20 30 40 50 V CB Fig 9. V CE =5V () T amb = 40 C T amb =25 C T amb = 0 C PDTC43XQA: Off-state input voltage as a function of collector current; typical values Fig. f= MHz; T amb =25 C PDTC43XQA: Collector capacitance as a function of collector-base voltage; typical values PDTC43X_23J_43Z_4YQA_SER Nexperia B.V. 207. All rights reserved Product data sheet Rev. 30 October 205 9 of 22
PDTC43X/23J/43Z/4YQA 50 V, 0 ma NPN resistor-equipped transistors 3 h FE 006aac805 () I C (A) 0. 0.08 aaa-08580 0.60 ma 0.54 ma 0.48 ma 0.42 ma 2 0.06 0.36 ma 0.30 ma 0.24 ma 0.04 0.8 ma 0.02 0.2 ma I B = 0.06 ma - 2 0 0 2 3 4 5 V CE Fig. V CE =5V () T amb = 0 C T amb =25 C T amb = 40 C PDTC23JQA: DC current gain as a function of collector current; typical values Fig 2. T amb =25 C PDTC23JQA: Collector current as a function of collector-emitter voltage; typical values aaa-08584 006aac8 V CEsat V I(on) - () () Fig 3. -2-2 I C /I B =20 () T amb = 0 C T amb =25 C T amb = 40 C PDTC23JQA: Collector-emitter saturation voltage as a function of collector current; typical values Fig 4. - - 2 V CE = 0.3 V () T amb = 40 C T amb =25 C T amb = 0 C PDTC23JQA: On-state input voltage as a function of collector current; typical values PDTC43X_23J_43Z_4YQA_SER Nexperia B.V. 207. All rights reserved Product data sheet Rev. 30 October 205 of 22
PDTC43X/23J/43Z/4YQA 50 V, 0 ma NPN resistor-equipped transistors () 006aac82 3 006aac83 V I(off) C c (pf) 2 - - 0 0 20 30 40 50 V CB Fig 5. V CE =5V () T amb = 40 C T amb =25 C T amb = 0 C PDTC23JQA: Off-state input voltage as a function of collector current; typical values Fig 6. f= MHz; T amb =25 C PDTC23JQA: Collector capacitance as a function of collector-base voltage; typical values PDTC43X_23J_43Z_4YQA_SER Nexperia B.V. 207. All rights reserved Product data sheet Rev. 30 October 205 of 22
PDTC43X/23J/43Z/4YQA 50 V, 0 ma NPN resistor-equipped transistors 3 h FE 2 () 006aac89 I C (A) 0. 0.08 0.06 0.70 ma aaa-0858 0.63 ma 0.56 ma 0.49 ma 0.42 ma 0.35 ma 0.28 ma 0.04 0.02 0.2 ma 0.4 ma I B = 0.07 ma - 2 0 0 2 3 4 5 V CE Fig 7. V CE =5V () T amb = 0 C T amb =25 C T amb = 40 C PDTC43ZQA: DC current gain as a function of collector current; typical values Fig 8. T amb =25 C PDTC43ZQA: Collector current as a function of collector-emitter voltage; typical values aaa-08585 006aac82 V CEsat V I(on) - () () Fig 9. -2-2 I C /I B =20 () T amb = 0 C T amb =25 C T amb = 40 C PDTC43ZQA: Collector-emitter saturation voltage as a function of collector current; typical values Fig 20. - - 2 V CE =0.3V () T amb = 40 C T amb =25 C T amb = 0 C PDTC43ZQA: On-state input voltage as a function of collector current; typical values PDTC43X_23J_43Z_4YQA_SER Nexperia B.V. 207. All rights reserved Product data sheet Rev. 30 October 205 2 of 22
PDTC43X/23J/43Z/4YQA 50 V, 0 ma NPN resistor-equipped transistors 006aac822 3 006aac823 V I(off) C c (pf) 2 () - - 0 0 20 30 40 50 V CB Fig 2. V CE =5V () T amb = 40 C T amb =25 C T amb = 0 C PDTC43ZQA: Off-state input voltage as a function of collector current; typical values Fig 22. f= MHz; T amb =25 C PDTC43ZQA: Collector capacitance as a function of collector-base voltage; typical values PDTC43X_23J_43Z_4YQA_SER Nexperia B.V. 207. All rights reserved Product data sheet Rev. 30 October 205 3 of 22
PDTC43X/23J/43Z/4YQA 50 V, 0 ma NPN resistor-equipped transistors 3 h FE 2 006aac784 () I C (A) 0. 0.08 0.06 0.50 ma aaa-08582 0.45 ma 0.40 ma 0.35 ma 0.30 ma 0.25 ma 0.20 ma 0.04 0.5 ma 0.02 0. ma I B = 0.05 ma - 2 0 0 2 3 4 5 V CE Fig 23. V CE =5V () T amb = 0 C T amb =25 C T amb = 40 C PDTC4YQA: DC current gain as a function of collector current; typical values Fig 24. T amb =25 C PDTC4YQA: Collector current as a function of collector-emitter voltage; typical values aaa-08586 006aac786 V CEsat V I(on) - () () Fig 25. -2-2 I C /I B =20 () T amb = 0 C T amb =25 C T amb = 40 C PDTC4YQA: Collector-emitter saturation voltage as a function of collector current; typical values Fig 26. - - 2 V CE =0.3V () T amb = 40 C T amb =25 C T amb = 0 C PDTC4YQA: On-state input voltage as a function of collector current; typical values PDTC43X_23J_43Z_4YQA_SER Nexperia B.V. 207. All rights reserved Product data sheet Rev. 30 October 205 4 of 22
PDTC43X/23J/43Z/4YQA 50 V, 0 ma NPN resistor-equipped transistors 006aac787 3 006aac788 V I(off) C c (pf) 2 () - - 0 0 20 30 40 50 V CB Fig 27. V CE =5V () T amb = 40 C T amb =25 C T amb = 0 C PDTC4YQA: Off-state input voltage as a function of collector current; typical values Fig 28. f= MHz; T amb =25 C PDTC4YQA: Collector capacitance as a function of collector-base voltage; typical values 3 006aac757 f T (MHz) 2-2 Fig 29. V CE =5V; T amb =25 C Transition frequency as a function of collector current; typical values of built-in transistor PDTC43X_23J_43Z_4YQA_SER Nexperia B.V. 207. All rights reserved Product data sheet Rev. 30 October 205 5 of 22
PDTC43X/23J/43Z/4YQA 50 V, 0 ma NPN resistor-equipped transistors 8. Test information 8. Quality information This product has been qualified in accordance with the Automotive Electronics Council (AEC) standard Q - Stress test qualification for discrete semiconductors, and is suitable for use in automotive applications. 8.2 Resistor calculation Calculation of bias resistor (R): R = VI I ----------------------------------- VI I2 I I2 I I Calculation of bias resistor ratio (R2/R): R2 ------ R = VI I4 ----------------------------------- VI I3 R I I4 I 3 n.c. I I ; I I2 R I I3 ; I I4 R2 GND aaa-020082 Fig 30. Resistor test circuit 8.3 Resistor test conditions Table 9. Resistor test conditions Type number R (k ) R2 (k ) Test conditions I I I I2 I I3 I I4 PDTC43XQA 4.7 350 A 450 A 350 A 450 A PDTC23JQA 2.2 47 90 A 40 A 55 A 5 A PDTC43ZQA 4.7 47 90 A 40 A 55 A 5 A PDTC4YQA 47 90 A 40 A 55 A 5 A PDTC43X_23J_43Z_4YQA_SER Nexperia B.V. 207. All rights reserved Product data sheet Rev. 30 October 205 6 of 22
PDTC43X/23J/43Z/4YQA 50 V, 0 ma NPN resistor-equipped transistors 9. Package outline 0.87 0.95 0.75 2 0.22 0.30 0.7 0.25 0.95.05 0. 0.6 0.24 0.04 max 0.34 0.40 Dimensions in mm 0.245 0.325 3.05.5 0.95 0.275 3-03-05 Fig 3. Package outline DFND-3 (SOT25) PDTC43X_23J_43Z_4YQA_SER Nexperia B.V. 207. All rights reserved Product data sheet Rev. 30 October 205 7 of 22
PDTC43X/23J/43Z/4YQA 50 V, 0 ma NPN resistor-equipped transistors. Soldering Footprint information for reflow soldering of DFND-3 package SOT25.2 0.45 (2x) 0.3. 0.35 (2x) 0.4 0.25 (2x) 0.75 0.5 0.3 0.4.5.4 0.4 0.5.3 0.5 0.3 0.4 0.3 0.4 0.5.3 solder land solder land plus solder paste occupied area solder resist Dimensions in mm Issue date 2--23 3-03-06 sot25_fr Fig 32. Reflow soldering footprint DFND-3 (SOT25) PDTC43X_23J_43Z_4YQA_SER Nexperia B.V. 207. All rights reserved Product data sheet Rev. 30 October 205 8 of 22
PDTC43X/23J/43Z/4YQA 50 V, 0 ma NPN resistor-equipped transistors. Revision history Table. Revision history Document ID Release date Data sheet status Change notice Supersedes PDTC43X_23J_43Z_ 20530 Product data sheet - - 4YQA_SER v. PDTC43X_23J_43Z_4YQA_SER Nexperia B.V. 207. All rights reserved Product data sheet Rev. 30 October 205 9 of 22
PDTC43X/23J/43Z/4YQA 50 V, 0 ma NPN resistor-equipped transistors 2. Legal information 2. Data sheet status Document status [][2] Product status [3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [] Please consult the most recently issued document before initiating or completing a design. [2] The term short data sheet is explained in section Definitions. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nexperia.com. 2.2 Definitions Draft The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. Nexperia does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local Nexperia sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification The information and data provided in a Product data sheet shall define the specification of the product as agreed between Nexperia and its customer, unless Nexperia and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the Nexperia product is deemed to offer functions and qualities beyond those described in the Product data sheet. 2.3 Disclaimers Limited warranty and liability Information in this document is believed to be accurate and reliable. However, Nexperia does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Nexperia takes no responsibility for the content in this document if provided by an information source outside of Nexperia. In no event shall Nexperia be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, Nexperia s aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of Nexperia. Right to make changes Nexperia reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use in automotive applications This Nexperia product has been qualified for use in automotive applications. Unless otherwise agreed in writing, the product is not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of a Nexperia product can reasonably be expected to result in personal injury, death or severe property or environmental damage. Nexperia and its suppliers accept no liability for inclusion and/or use of Nexperia products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. Applications Applications that are described herein for any of these products are for illustrative purposes only. Nexperia makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using Nexperia products, and Nexperia accepts no liability for any assistance with applications or customer product design. It is customer s sole responsibility to determine whether the Nexperia product is suitable and fit for the customer s applications and products planned, as well as for the planned application and use of customer s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. Nexperia does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer s applications or products, or the application or use by customer s third party customer(s). Customer is responsible for doing all necessary testing for the customer s applications and products using Nexperia products in order to avoid a default of the applications and the products or of the application or use by customer s third party customer(s). Nexperia does not accept any liability in this respect. Limiting values Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 6034) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale Nexperia products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nexperia.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. Nexperia hereby expressly objects to applying the customer s general terms and conditions with regard to the purchase of Nexperia products by customer. PDTC43X_23J_43Z_4YQA_SER Nexperia B.V. 207. All rights reserved Product data sheet Rev. 30 October 205 20 of 22
PDTC43X/23J/43Z/4YQA 50 V, 0 ma NPN resistor-equipped transistors No offer to sell or license Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Quick reference data The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Translations A non-english (translated) version of a document is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions. 2.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 3. Contact information For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com PDTC43X_23J_43Z_4YQA_SER Nexperia B.V. 207. All rights reserved Product data sheet Rev. 30 October 205 2 of 22
PDTC43X/23J/43Z/4YQA 50 V, 0 ma NPN resistor-equipped transistors 4. Contents Product profile........................... General description......................2 Features and benefits.....................3 Applications............................4 Quick reference data.................... 2 Pinning information...................... 2 3 Ordering information..................... 2 4 Marking................................ 3 4. Binary marking code description............ 3 5 Limiting values.......................... 3 6 Thermal characteristics.................. 5 7 Characteristics.......................... 6 8 Test information........................ 6 8. Quality information..................... 6 8.2 Resistor calculation.................... 6 8.3 Resistor test conditions................. 6 9 Package outline........................ 7 Soldering............................. 8 Revision history........................ 9 2 Legal information....................... 20 2. Data sheet status...................... 20 2.2 Definitions............................ 20 2.3 Disclaimers........................... 20 2.4 Trademarks........................... 2 3 Contact information..................... 2 4 Contents.............................. 22 Nexperia B.V. 207. All rights reserved For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com Date of release: 30 October 205