Owner s Manual XM-767 POWER TOWER
Table of Contents Important Safety Information Before You Start Assembly Parts List Exploded View 3 5-0
Important Safety Information NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. Prior to assembly, remove components from the box and verify that all the listed parts were supplied. SAFETY INFORMATION WARNING! Before using this unit or starting any exercise program, consult your physician. This is especially important for persons over the age of 35 and/or persons with preexisting health problems. XMARK Fitness assumes no responsibility for personal injury or property damage sustained by or through the use of this product. It is the owner s responsibility to ensure that all users of this unit have read the Owner s Manual and are familiar with safety information and precautions. SAFETY PRECAUTIONS This unit should only be used on a level surface and is intended for indoor use only. XMARK Fitness recommends an equipment mat be placed under the unit to protect the floor or carpet and for easier cleaning. Wear comfortable, good-quality walking or running shoes and appropriate clothing. Do not use this unit with bare feet, sandals, socks or stockings! Always examine your unit before using to ensure all parts are in working order. Do not leave children unsupervised near or on the unit. Service to your unit should only be performed by an authorized service representative, unless authorized and/or instructed by a XMARK Fitness technician. Failure to follow these instructions will void the warranty. 3
Before You Start THANK YOU for making this unit a part of your exercise program. XMARK Fitness assures the very best in value, appearance, durability and biomechanics. This manual will guide you through the assembly process. If at any time you are having trouble with the assembly or use of this product, then please contact us at ourxmark Fitness help line. We have trained service technicians on site to take care of you, our valued customer. Visit www.xmarkfitness.com for warranty information QUESTIONS? CALL -800-79-605 Monday-Friday 8:30 a.m.-5:00 p.m. (Central Standard Time) XMARK FITNESS SERIES MODEL: XM-767 When calling please have the following product information available: Model Name : Date Mfg.: Serial # Model Name Decal Location
Assembly 5
Assembly NOTE: Hand tighten bolts and Nylon Lock nuts until machine is fully assembled. Step Connect Upright Frame (#) to Base Frame (#8) using: one M0*75 Button Head Cap Screw (#) two Φ*Φ3* Flat Washer (#9) one M0 Nylon Locknut (#5) Repeat Step for other side of XM-767. 6
Assembly NOTE: Hand tighten bolts and Nylon Lock nuts until machine is fully assembled. Step Connect Back Pad Support Frame (#5) to both Upright Frames (#) using: four M0*80 Button Head Cap Screw (#3) eight Φ*Φ3* Flat Washer (#9) four M0 Nylon Locknut (#5) two Small Plates (#) NOTE: Small Plates (#) are to be placed on the outside of the machine. Connect Left and Right Angle Supports (#, #3) to Base Frame (#8) and Cross Frame (#9) using: four M0*80 Button Head Cap Screw (#3) eight Φ*Φ3* Flat Washer (#9) four M0 Nylon Locknut (#5) Connect Left and Right Angle Supports (#, #3) to Upright Frame (#) using: two M0*75 Button Head Cap Screw (#) four Φ*Φ3* Flat Washer (#9) two M0 Nylon Locknut (#5) Connect Right and Left Chin-Up Bars (#6, #7) to Upright Frames (#) using: four M0*75 Button Head Cap Screw (#) eight Φ*Φ3* Flat Washer (#9) four M0 Nylon Locknut (#5) two Bolt cap (#0) two Big Plates (#) NOTE: Big Plates (#) are to be placed on the outside of the machine. 7
Assembly Step 8
Assembly NOTE: Hand tighten bolts and Nylon Lock nuts until machine is fully assembled. Step 3 Connect Elbow Pad Support Frame (#) to Upright Frame (#) using: four M0*00 Button Head Cap Screw (#) four Φ*Φ3* Flat Washer (#9) four Big Washer (#) four M0 Nylon Locknut (#5) 9
Assembly Step NOTE: Wrench Tighten bolts and Nylon Locknuts. Connect Back Pad (#3) to Back Pad Support Frame (#5) using: two M0*7 Button Head Cap Screw (#7) two Φ*Φ3* Flat Washer (#9) Connect Elbow Pads (#0) to Elbow Pad Support Frames (#) using: four M0*7 Button Head Cap Screw (#7) four Φ*Φ3* Flat Washer (#9) 0
Parts List XM-767 Parts List Ref # Part # Description Qty P0008 Upright Frame P0050 Left Angle Support 3 P00503 Right Angle Support P0008 Elbow Pad Support Frame 5 P0050 Back Pad Support Frame 6 P00505 Right Chin-Up Bar 7 P00506 Left Chin-Up Bar 8 P003 Base Frame 9 P00507 Cross Frame 0 P00083 Elbow Pad P00667 Small Plate P00508 Big Plate 3 P0008 Back Pad P0008 Plug 3 5 P00509 Grip 6 P0050 Grip 6 7 P009 Plug 50.8*76. 9 P0003 Flat Washer Φ*Φ3* 0 P00557 Bolt Cap P00033 Big Washer Φ*Φ30* P006 Button Head Cap Screw M0*75 8 3 P0063 Button Head Cap Screw M0*80 8 P00589 Button Head Cap Screw M0*00 5 P0056 Nylon Locknut M0 0 6 P0083 Plug 50.8 3 7 P006 Button Head Cap Screw M0*7 6 8 P005 Foot Cap, Right 50.8*76. XM Series 9 P0055 Foot Cap, Left 50.8*76. XM Series 30 P00636 Button Head Cap Screw M8*5 6 3 P00037 Flat Washer Φ9*Φ* 6 3 P00560 Hex Key S=6 33 P000 Wrench 7-9 3 H0000 Bolt Pack, XM-767 35 M0005 Owner's Manual XM-767
Exploded View
Customer Service: -800-79-605