CAT: TYPE: PROJECT: QTY: FEATURES 12V AC/DC guide lighting fixture uses high brightness LEDs to provide glare-free, non-intrusive illumination of aisles and steps for seat, wall or pole mounted applications Non-intrusive glare-free illumination with improved illumination (50% brighter than original Beacon LED) New lens etching with black background creates a highly visible illumination of characters (150% larger than original Beacon LED) Fully replaceable AC/DC LED board operates at efficient 2.0W per unit (50,000-100,000 hour average lifespan) Compact, spherical, polycarbonate fixture is geometrically neutral design - no knee hazard Integrated wireway and end cap system available Dome snaps into base for secure vandal-proof installation Seat light is adaptable for stationary or pivot arms, hard or fabric surface-mount, right or left side orientation Smooth full range dimming capability with commercially available analog dimmers for magnetic low voltage transformers BEACON TM Seat-mounted guide lighting system uses high brightness SMD LEDs to provide glare-free, non-intrusive illumination of aisle and steps. SPECIFICATIONS BEACON SEAT LIGHT EFFICACY LM/WT CRI LM/UNIT WT/MODULE Average, all colors 23.28 n/a 29.56 2.0 Measurements are based on 12V DC power design calculations will vary based on power supply and run lengths. LED DATA RATED TO LM80 STANDARDS SMD LED (AVERAGE) (See chart on Page 5) WATTAGE LED LIFE* / COLOR TEMP VIEWING ANGLE 2.0W per Beacon 50,000 hrs. (5500 K), Warm (2800 K) 100,000 hrs. 150 * SMD LEDs are mounted to aluminum PCB and operate in 3 each 3 LED series for illumination and 2 each 1 LED series for row indicator window at 85% of LED spec recommended current rating. PROFILES Rear Mount Beacon Seat Light 2 1 /4" 1 7 /1 Pole Mounted Beacon Option (Consult Factory) 1 3 /32" 9 /32" 2 1 /4" 1. LEDs - 11 SMD LEDs (2.0W total), 9 LEDs for illumination and 2 for Row Indicator 2. Colors -, or Warm (Red or Blue also available: consult factory) 3. Installation - Super-Flex conduit included. Suitable and easily installed for both new construction and renovation: surface or pole (1½" diameter) mount available 5. Power Supply - Listed Class II 12V AC or DC power supply required 6. Safety - Meets ADA requirements and NFPA (National Fire Protection Agency) guidelines for aisle/step illumination and emergency egress standards 7. Safety - Meets Life Safety Code when mounted 15-18 above floor 8. Listing - CETLUS listed for Class II applications 9. Warranty - 5 Year Warranty BEACON SEAT LIGHT ORDER SPECIFICATION GUIDE Example: BSL-R-09-YL-RI PRODUCT CODE BSL BSL = Beacon Seat Light MOUNT STYLE R = Rear Mount P = Pole Mount NO. OF LEDS FOR ILLUMINATION 09 09 = 9 LED LED COLOR YL = WH = WW = Warm OPTIONAL ROW INDICATION RI RI = Row Indication* * Leave blank if not required REQUIRED POWER SUPPLY PSU See power supply specsheets Super-flex Conduit included Sold as complete installation unit REQUIRED POWER SUPPLY OPTIONS JT-240-4-5-12-D JTH-240-4-5-12-D JT-60-1-5-12-D JTH-60-1-5-12-D SC-150-2-5-12-A SC-250-4-5-12-A SC-300-5-5-12-A SCH-300-5-5-12-A See power supply specifications for more information Bracket for Pole Mounting 1.5" Dia. OPTIONAL DIMMERS N-600 N-1000 NH-600 NH-1000 DIM-12V-8A Copyright 2014 Tivoli 08.12.14 - Page 1 of 5
MOUNTING ACCESSORIES REPLACEMENT PARTS 1 /2" 4" 2" BSL-JB-LP Junction box, low profile BSL-PC-1/4 ¼ Flex conduit BSL-BS-CC-8 Conduit cover and base - 8 REPLACEMENT BOARD WITH LEDS BSL-PCB-09-YL PCB - BSL-PCB-09-WH PCB - BSL-PCB-09-WW PCB - Warm REPLACEMENT DOME BSL-DOME-NW Dome - No indicator window BSL-DOME-RI Dome - With indicator window Available with blue handicap ADA indicator PATENTED TWO TONE BULLNOSE ACCESSORIES 3 3 /1 2 3 /8" 2 BNS-TT-GY-12 Two tone bullnose 12 length Black/Grey PATENT NO. US 6,554,446 BNS-TT-EC-L Bullnose endcap - Left BNS-TT-EC-R Bullnose endcap - Right CARPET TO EDGE WIREWAY BNS-SW-CE-BK-8 8 length - Black base with Black cover BNS-SW-CE-GY-8 8 length - Black base with Grey cover (shown) BNS-SW-CE-BS-8 8 length - Black base only CARPET TO CARPET WIREWAY BNS-SW-CC-BK-8 8 length - Black base with Black cover BNS-SW-CC-GY-8 8 length - Black base with Grey cover (shown) BNS-SW-CC-BS-8 8 length - Black base only * CC (Carpet-to-carpet) profile is also used for Carpet-to-wall installations. BULLNOSE WIREWAY COVERS BNS-SW-TC-BK-8 8 length - Black top cover BNS-SW-CE-GY-8 8 length - Grey top cover (shown) EXTRUSION ADHESIVE ADH-MB-75AM-10 Extrusion adhesive 10.1 oz tubes sold individually in case of 30 each. END CAP ADHESIVE ADH-IA-10.2-CA Clear liquid adhesive for end caps. 10.2 oz tubes sold individually in case of 12 each. Copyright 2014 Tivoli 08.12.14 - Page 2 of 5
BSL BEACON SEAT LIGHT Lens 15 3 Junction Box Two-tone Bullnose Carpet 5 4 BEACON SEAT LIGHT POINT-BY-POINT: AT 15" COLOR 0.04 0.03 1.04 1.24 0.54 1.00 0.71 2.34 1.29 2.68 1.80 2.50 0.93 5.44 2.76 4.78 2.82 3.11 7.78 3.66 6.25 2.53 3.31 1.01 0.73 2.50 0.93 5.44 2.76 4.78 2.82 0.71 2.34 1.29 2.68 1.80 1.04 1.24 0.54 1.00 0.03 0.04 3 LED BINNING LED technology is changing rapidly. LED s are made in lots and sorted into bins based on wavelength ranges that achieve colors. Tivoli uses a range of 2500 K to 3100 K for Warm and 5000 K to 6000 K for. Individual orders will be bin-sorted to within plus or minus 200 K and it is recommended to purchase 10% replacement stock within that bin lot to ensure matched color for needed replacements. Copyright 2014 Tivoli 08.12.14 - Page 3 of 5
LIFE SAFETY CODE 5-8.1.3 Life Safety Code: Exception: In assembly occupancies, the illumina tion of the floors of exit access shall not be less than 1/5 (.20) footcandle during periods of perfor mances or projections involving directed light. 8-2-5.9.8 Life Safety Code: Aisle Marking. A contrasting marking stripe shall be provided on each tread at the nosing or leading edge such that the location of such tread is readily apparent, particularly when viewed in descent. Such stripes shall be at least 1 in. (2.5 cm) wide and shall not exceed 2 in. (5 cm) in width. Exception: The marking stripe shall not be required where tread surfaces and environmental conditions under all conditions of use are such that the location of each tread is readily apparent, particularly when viewed in descent. 3 20 5 4 BEACON SEAT LIGHT POINT-BY-POINT: AT 2 COLOR 0.83 1.45 0.59 1.93 1.45 0.59 0.83 0.47 1.58 3.08 1.53 3.94 3.08 1.53 1.58 0.47 0.75 1.40 2.45 1.07 3.52 1.67 4.06 2.01 3.52 1.67 2.45 1.07 1.40 0.75 0.51 1.89 0.78 2.57 1.15 2.71 1.27 2.57 1.15 1.89 0.78 0.51 0.40 0.95 0.48 1.71 1.83 1.71 0.48 0.95 0.40 0.42 0.42 0.16 0.45 0.52 0.45 0.16 3 0.34 0.18 0.34 Copyright 2014 Tivoli 07.09.14 Page - 4 of 5
Wire S BEACON TM RECOMMENDED POWER SUPPLIES CAT NO APPLICATION PRIMARY AND SECONDARY TOTAL WATTAGE / AMPERAGE PER BREAKER LISTING DIMENSIONS ELECTRONIC OR AC MAGNETIC DIMMABLE (Y OR N) JT-60-1-5-12-D Indoor 120V AC / 12V DC 60 / 1X5A CETLUS 4.25 W X 8.50 L X 3.25 D Magnetic Y: A, C, F JTH-60-1-5-12-D 277V AC / 12V DC 60 / 1X5A CETLUS 4.25 W X 8.50 L X 3.25 D Magnetic Y: B, D, F JT-240-4-5-12-D 120V AC / 12V DC 240 / 4X5A CETLUS 8.50 W X 16.00 L X 4.50 D Magnetic Y: A, C, F JTH-240-4-5-12-D 277V AC / 12V DC 240 / 4X5A CETLUS 8.50 W X 16.00 L X 4.50 D Magnetic Y: B, D, F SC-150-2-5-12-A 120V AC / 12V AC 150 / 2X5A CETLUS 4.88 W X 4.63 L X 6.75 D Magnetic Y: A, C SC-250-4-5-12-A 120V AC / 12V AC 250 / 4X5A CETLUS 4.88 W X 4.63 L X 6.75 D Magnetic Y: A, C SC-300-5-5-12-A 120V AC / 12V AC 300 / 5X5A CETLUS 4.88 W X 4.63 L X 6.75 D Magnetic Y: A, C SCH-300-5-5-12-A 277V AC / 12V AC 300 / 5X5A CETLUS 4.88 W X 4.63 L X 6.75 D Magnetic Y: B, D DIMMERS SELECTOR DIMMER TYPE CONTROL SIGNAL *DIM-OT applications require 1 each DIM-OT per 5 amp circuit *JT Series secondary outputs would be limited to 8 amps. INPUT VOLTAGE OUTPUT VOLTAGE MAX LOAD BREAKER RATING DIMENSIONS A N-600 AC Magnetic N/A 120V AC 120V AC 450W N/A Recessed Single Gang Box B NH-600 AC Magnetic N/A 277V AC 277V AC 450W N/A Recessed Single Gang Box C N-1000 AC Magnetic N/A 120V AC 120V AC 800W N/A Recessed Dual Gang Box D NH-1000 AC Magnetic N/A 277V AC 277V AC 800W N/A Recessed Dual Gang Box E N-1500 AC Magnetic N/A 120V AC 120V AC 1200W N/A Recessed Dual Gang Box F DIM-OT-1-5-D Control Interface 0-10V DC 12V DC 12/V DC 60W 5A* 7"L X 1½"W X ¾"H PRODUCT SPECIFICATION GUIDE (MAX FEED BY COLOR) BEACON SEAT LIGHT WATTS PER BEACON (5500 K) 1.1W 49 Warm (2800 K) 1.1W 49 2.0W 27 Blue 1.2W 45 Red 2.0W 27 *Based on 4.5 Amp at 90% load. MAX BEACONS PER 5A CIRCUIT* In order to operate Class II lighting wires with a right gauge to minimi charts providing a reference for de maximum connection wire length 12V Class Wire Gauge 18 16 14 12 Copyright 2014 Tivoli 08.12.14 - Page 5 of 5