Machines MINIPRESS P - Deluxe boring and insertion machine Front adjustable boring distance with digital counter Pneumatic hold-down clamps Improved boring depth adjustment Improved positioning stops (qty 4) Single phase - 0V power Laser center line optional Three phase - 0V power Laser center line optional Three phase - 440V power Laser center line optional M5.05.US M5.004.US M5.005.US MINIPRESS P - Standard boring and insertion machine Front adjustable boring distance Improved boring depth adjustment Improved positioning stops (qty 4) Single phase - 0V power Optional laser center line, digital counter and hold down clamps M5.05.UB MINIPRESS M - 0V manual boring and insertion machine 0V power with molding plug (por table) Does not require pressurized air Positioning stops included (qty 4) Single phase - 0V power Optional laser center line, digital counter and hold down clamps M5.056.US MINIDRILL P - Standard boring machine Front adjustable boring distance Improved positioning stops (qty 4) Single phase - 0V power Optional laser center line, digital counter and hold down clamps. Three phase - 0V power Optional laser center line, digital counter and hold down clamps. Three phase - 440V power Optional digital counter and hold down clamps. No laser center line option. M5.05.50 M5.004.50 M5.005.50 Optional items Laser center line set MZR.500.US Digital counter set MZE.0 Boring distance stop kit (MINIPRESS M only) MZS.00.US Hold down clamp set M5.070.US 86 0 Blum, Inc. Subject to technical modifications without notice.
Machine accessories a spindle head spindle head for use with MINIPRESS/MINIDRILL Bores nine holes spaced mm apart, parallel to the fence New feature quick-disconnect chucks Requires retrofit set M0..UM for machines produced in 00 or prior spindle head MZK.0S Chuck cover cap M0. 8 spindle head 8 spindle head for use with MINIPRESS/MINIDRILL Bores eight holes spaced mm apart, perpendicular to the fence New feature quick-disconnect chucks Requires retrofit set M0..UM for machines produced in 00 or prior 8 spindle head MZK.880S Chuck cover cap M0. MINISTICK Boring drawer fronts Enables fast setup for drawer front boring and front fixing bracket insertion with the MINIPRESS. Eliminates the need for multiple fence stops. Includes: LH & RH adjustment stick mechanism Upper drawer stops (qty ) Bottom drawer stops (qty ) Inserting front fixing brackets MINISTICK MZS.0040 Dimensions in millimeters (inch equivalents as noted) 0 Blum, Inc. 87
TANDEMBOX cover caps For use with TANDEMBOX drawers Non-handed, symmetrical design Colors: gray and silver Custom logo printing available Gray cover cap Silver cover cap ZAA.5C ZAA.5 Front stabilization bracket Used for stabilizing wide drawers and/ or tall drawer fronts Reinforces the connection between the drawer bottom and the front One required per drawer, center on drawer bottom Front stabilization bracket application Space requirements Ø0 x 0 Front boring dimensions 47.5 min. + overlay.5 Ø0 x 0 55 min. 5.5 + overlay Front stabilizer bracket Z6.0E Side spacer Side spacer application For spacing out cabinet profiles for clearance on interior roll out trays. (/8") 76 (") 6 6 (/4") (-/4") (-/4") (/4") (/") (/") 6 (-7/6") 8 (/6") (/8") 5 (") 6 (/4") 66.00.HG 64 (-/") Spacer T5.570 POZI installation screw 66.00.HG NOTE: Use two on 558 series and three on 556 series 88 0 Blum, Inc. Subject to technical modifications without notice.
a Lateral stabilizer set Set includes: Linkage rod, 076 (4-/8") cut to size Pinion gears (qty ) Rear brackets, left and right 4 Gear racks, left and right 4 Drawer length 500 (0") ZST.500BA 550 (") ZST.550BA Linkage rod specifications Installation Assembly Length = opening width minus 86 (-/8") Maximum opening width 6 (45-/4") 500 (0") 64 opening width - 86 (-/8") 550 (") 8 8 8 6 Space requirements M height drawer B height drawer D height rear view min. min. min. 4 min. 06 min. 4 min. 4 8 min. 4 min. 07 min. Dimensions in millimeters (inch equivalents as noted) 0 Blum, Inc. 8
METAFILE set Set makes one standard hanging file. Recommended use in combination with B height drawer. 6 4 Set includes: Steel hanging rails (qty 4) x x 550 (/8" x /" x -5/8") Rail support brackets (qty 4) Rail support covers (qty 4) 4 Glide profiles (qty 4) length 550 (-5/8") 5 Flathead wood screws (qty 8) #6 x (/4") 6 Lateral brackets (qty 4) 4 5 METAFILE set Replacement parts Rail support covers Glide profiles Installation wood screw ZRM.5500 ZRM.000 ZRM.550G 6064N Cutting dimensions for wood parts A B Width = opening width minus 75 (-5/6") Length = actual runner length minus 4 (5/6") Width = opening width minus 87 (-7/6") Height = 7 (0-/6") minimum C B C Minimum opening dimensions: letter = 4 (6-/4") legal = 48 (-/4") A Installation drawer front cabinet drawer back 8 *INSERTA only 64 6 47.5 min. + overlay 6 min Ø0 x * 5.5 + overlay 5.5 47.5 6 min 5.5 min 60 min 7 min 0.5 min 5 0 0 Blum, Inc. Subject to technical modifications without notice.
a Bumpers Cushions door closing Clear with a self-adhesive back POZI DRIVER and bits A POZI screwdriver (different from Phillips) is the most crucial tool you can use to assure that full torque is applied to all Blum mounting screws. POZI screws can be identifi ed by the distinctive tick marks located in the center of the screw head recess. POZI Phillips Ø6 (/4") x.5 (/6") Ø0 (/8") x (/8") FX404 SJ5 tick marks # POZI DRIVER POZI DRIVER /4" Magnetic bit holder BIT HOLDER # x " POZI bit insert POZI BIT #x # x " POZI bit insert POZI BIT #x Screws Deep thread system screw Pilot bore Ø5 (/6") hole Deep thread wood screw Truss head wood screw Pilot bore Ø (/") hole #7 x mm, # POZI 66.00.HG #7 x 4.5 mm, # POZI 66.450.HG #6 x 5/8", # Phillips 606N #6 x 5/8", # POZI 606P #7 x 5/8", # Phillips 707N #7 x /4", # Phillips 7074N #6 x /", # Phillips 6TH Bits Drill bits Ø5 mm drill bit Ø0 mm drill bit Drill bits for the MINIPRESS/MINIDRILL and boring heads Ø5 mm drill bit (right hand) Ø5 mm drill bit (left hand) Ø0 mm drill bit (right hand) Ø0 mm drill bit (left hand) M0.ZB05.D M0.ZB05.D M0.ZB0.0 M0.ZB0.0 Dimensions in millimeters (inch equivalents as noted) 0 Blum, Inc.