10ft. Square Side Mount Item # 64443 A S S E M B L Y A N D O P E R A T I O N
Thank you for your purchase of Frontgate s 10 Square Side Mount umbrella. Please remove all contents from the package, inspect and review checklist for all parts. CAUTION: To reduce personal injury and damage to your umbrella, read and follow this Assembly and Operation information. C H E C K L I S T : A - Base Shell and Base Lid B - 360 Rotating Hub C - Foot Pedal D-Main Frame E - Removable Crank Handle F - Main Frame Grip Handle G- Main Arm H- Canopy I - Umbrella Light Adapter G H F E I D B C A Base Shell Base Lid Base Parts Boxed Separately REQUIRED FOR ASSEMBLY: 200 lbs. playground sand (not included). 1
PARTS LIST Part Description Qty. 1 Base Shell 1 2 Base Lid 1 3 Steel Wrench 1 4 Inverted Base Stem 1 5 Inverted Plate 1 6 Playground Sand (not included) 200 lbs. 7 Large Hexagon Wrench 1 8 Main Frame and Rotating Hub 1 9 Crank Lift Handle 1 10 Small Hexagon Wrench 1 11 Hub Bolts 4 12 Plate Bolts 4 13 Washers 4 IMPORTANT: Prior to assembly it is important to decide on the location of the umbrella. Allow ample height to avoid damage to your umbrella during assembly and usage. Choose a location that is level and sturdy. Avoid any sloping or soft ground. Consider a location that will maximize the umbrella s rotating swivel function. Placing the umbrella between two entertaining areas is ideal. NOTE: Some parts may be included in the styrofoam packaging. DO NOT discard any packaging or box until assembly is complete. REQUIRED FOR ASSEMBLY: 200 lbs. playground sand (not included). NOTE: Do not put or allow sand into the center of the base shell. 2
S T E P 1 Base Assembly Select area to set base and place in desired location. NOTE: Moving the umbrella will be difficult once fully assembled. Remove inverted plate from inverted base stem (Fig. 1). Remove the inverted base stem by using the steel wrench (provided) turning counter-clockwise (Fig. 2), now remove base lid from base shell (Fig. 3). Return inverted base stem to base shell, to keep sand out of base stem channels. (Fig. 4) IMPORTANT: Do not allow sand to spill inside the base stem channels, as it will impede further installation. Now, fill each section of the base shell with dry playground sand (Fig. 5). The base holds up to 200 lbs. of sand. NOTE: Base weight will be 250 lbs. after sand is added. Now, remove inverted base stem (Fig. 6) from base shell. Place base lid back onto base shell and re-install the inverted base stem (Fig. 7). IMPORTANT: Carefully, as you tighten the inverted base stem, you will notice clicking/ratcheting sound. Please make sure it is between CLICKS. Do not over tighten inverted base stem or parts may be damaged. Steel Wrench (Fig. 1) (Fig. 2) (Fig. 3) Base Stem Channels (Fig. 4) (Fig. 5) (Fig. 6) (Fig. 7) 3
S T E P 2 Umbrella Assembly NOTE: Two-persons recommended for team lift and the rest of the assembly. Remove rotating hub from the main frame by removing the (2) main frame bolts (Fig. 8), set aside bolts for later use. Now, attach the inverted plate to the rotating hub by tightening with the (4) plate bolts (Fig. 9). Attach rotating hub (with inverted plate) to inverted base stem by tightening with the (4) hub bolts and (4) washers (Fig. 10). Assemble main frame onto hub and lower carefully. Insert the two bolts on bottom portion of main frame and tighten using large hexagon wrench provided (Fig. 11). DO NOT OVER-TIGHTEN. Locate the crank lift handle and install onto the crank mechanism located on the main frame. Use the small hexagon wrench provided to lock in the small screw (Fig. 12). REMOVE ALL PLASTIC PACKAGING MATERIAL FROM ALL PARTS PRIOR TO OPENING UMBRELLA. CHECK UNDER CANOPY FOR PACKAGING AROUND RIBS. Your umbrella is now ready to operate! Large Hexagon Wrench (Fig. 8) (Fig. 9) (Fig. 10) Large Hexagon Wrench Small Hexagon Wrench (Fig. 12) (Fig. 11) 4
S T E P 3 Opening Umbrella From closed position, turn the crank clockwise while disengaging main frame grip handle and guiding up main frame (Fig. 13), until the umbrella is fully opened (Fig. 14) and the hub is at the top most position (Fig. 15). Tilt umbrella to desired position. See Step 4 for tilt operation. NOTE: When cranking umbrella open, if you feel resistance and the umbrella is not opening, do not force the crank. Gently spread umbrella ribs with hands, then continue to crank open. (Fig. 13) (Fig. 14) Hub (Fig. 15) 5
S T E P 4 Tilting Umbrella To tilt umbrella, squeeze the main frame grip handle (Fig. 16) and slide handle to desired tilt position (Fig. 17). Release main frame grip handle to lock into tilt position. Horizontal Position Hole Tilt Position #1 Hole (Fig. 16) Tilt Position #2 Hole Tilt Position #3 Hole Tilt Positions (Fig. 17) Horizontal/Open Position Tilt Position #1 Tilt Position #2 Tilt Position #3 6
S T E P 5 Closing Umbrella To close umbrella, squeeze main frame grip handle (Fig. 18) and slide grip handle down to closed position (Fig. 19) while turning crank handle counter-clockwise (Fig. 20) until umbrella is closed (Fig. 21). Use ties to secure canopy to the main frame when umbrella is not in use. (Fig. 18) (Fig. 19) (Fig. 20) (Fig. 21) 7
Rotating Features To OPERATE the 360 Rotating Hub Swivel: Place your foot on the foot pedal of the rotating hub and step-on the base pedal to release rotating lock (Fig. 22). Place hands on the main frame (Fig. 23) and swivel the umbrella frame in either direction until desired position is reached (Fig. 24). Step off the foot pedal to engage rotating lock and lock position (you will hear the pedal click, as it reaches the next available lock position). (Fig. 22) (Fig. 23) (Fig. 24) 8
Umbrella Light Features To ATTACH Umbrella Light: Loosen the light adapter built into the umbrella runner by turning counter-clockwise (Fig. 25). After loosening, pull down light adapter post (Fig. 26) to attach the umbrella light (sold separately). (Fig. 25) (Fig. 26) 9
SAFETY PRECAUTIONS: Close the umbrella in windy conditions or when a storm approaches. Never allow the umbrella to flap in the wind; this could damage the canopy. Do not leave open umbrella unattended. If damage occurs, this is not covered by the warranty. When adjusting the umbrella, make sure that no person(s) or item(s) are close to the umbrella. This is important to prevent injury or material damage. CARE AND MAINTENANCE: When not in use, close and cover umbrella with a protective cover. Allow a wet canopy to dry opened up. If necessary, clean the fabric with lukewarm water, mild detergent, and a sponge. Wipe sliding marks on the aluminum poles with a damp cloth. Winter Storage: Store in a dry place. Any visible defects must be repaired by a professional. After the Winter: Areas subject to turning and sliding can be treated with a non-staining lubricant spray (silicone-based). Check the condition and function of the umbrella. Any defects must be repaired by a professional. 10
Our Quality Commitment At Frontgate, our primary focus is quality. We guarantee that every product we sell will stand up to the supreme test our customers satisfaction. Our One-Year Guarantee lets you put any Frontgate product to the test. If for any reason you are not satisfied, simply return it within 90 days and we ll replace it or refund the cost of the item (excluding Shipping and Processing fees). In addition, we will repair or replace any product for a full year from the date of purchase. Please note: Any items that are monogrammed, customized or made-toorder cannot be returned or exchanged unless damaged or defective. All returned items must be in their original packaging and in the condition in which they were received. Please wrap your item carefully; package and ship it so that damage does not occur. Follow the return process instructions on the pack slip or visit our website for more information regarding returns. Please contact one of our Product Specialists for assembly assistance or questions at 1-800-537-8484 or email ps@frontgate.com. Specialists are available weekdays 8:00 a.m. to 8:00 p.m. EST or Saturday 9:30 a.m. to 6:00 p.m. 2013 Frontgate, Inc. - All Rights Reserved. Revised 6/13