R RESIDENTIAL FINISHES PVD Lifetime US3 Polish Brass US5 Antique Brass Oil Rubbed Bronze Tuscany Bronze Satin Nickel A Black Nickel/Pewter US26 Polish Chrome Not all styles available in all fi nishes. See fi nish chart on page 20 for details. philihardware.com
The FAIRMONT handleset is a new addition to our interconnected handlesets. It is featured on the left in our most recently added fi nish, Tuscany Bronze, and is also available in three other fi nish options. -Satin Nickel -Oil Rubbed Bronze PVD-Lifetime Finish 1
200B Series ANSI Grade 3 Certifi ed Deadbolt (ANSI/BHMA A156.5-2001) for Auxiliary Lock and Associated Products Product meets or exceeds ANSI Grade 3 requirements for auxiliary locks CONSTRUCTION Steel construction for long-lasting operation. Exposed trim finish meets or exceeds 96hrs Salt Spray test required by ANSI (American National Standard Institute.) OUTSIDE COVER Wrought brass or stainless steel cover. SCREWS Combination screws suitable for both wood door or metal door mounting. STRIKE Standard 1-3/4 x 2-1/4 full lip strike. CYLINDER 5pins tumbler cylinder with Solid Brass core and pins. LATCH ¼ dia hardened steel rod insert to resist sawing and cutting. Full 1 throw antirust stainless steel latch bolt. 1 x 2-1/4 Mortise in deadlatch, adjustable for both 2-3/8 and 2-3/4 backset requirement. Precision cylinder construction provides excellent operative durability and reliability. Pre-drilled construction hole for construction keying. Nickel plated solid brass key. 500T Series ANSI Grade 3 Certifi ed Leverset (ANSI/BHMA A156.2-2003) for bored & preassembled locks & latches Product meets or exceeds ANSI Grade 3 requirements for single-point locks and latches LEVER Solid Zinc lever. Reversible lever design for both right-hand and left-hand door mounting. Multiple design and finish to meet variety demands. (Please refer to page 9-10 for detail) SCREWS Combination screws suitable for both wood door or metal door mounting. ROSETTE Wrought brass or stainless steel cover. CONSTRUCTION Steel construction with square spindle mechanism for long lasting operation. Exposed trim finish meets or exceeds 96hrs Salt Spray test required by ANSI (American National Standard Institute). STRIKE Standard 1-3/4 x 2-1/4 full lip strike with tab. LATCH 1 x 2-1/4 Mortise in latch, adjustable for both 2-3/8 and 2-3/4 backset requirement. Industrial standard 1/2 throw latch bolt. CYLINDER 5pins tumbler cylinder with solid brass core and pins. Precision cylinder construction provides excellent operative durability and reliability Pre-drilled construction hole for construction keying. Nickel plated solid brass key. 2
ENTRANCE HANDLESETS NEW! CHATEAU (CH) FAIRMONT (FT) RICHMOND (RI) HAMPTON (HA) 3
SPECIFICATIONS ANSI Grade 3 Door Prep Cross bore: 2-1/8 Mounting (center to center): 5-1/2. Backset Fits both 2-3/8 or 2-3/4. Door Fitting 1-3/8 ~ 2 door thick. 2-1/4 thick optional. Exposed Trim Forged brass, wrought brass, or zinc alloy. Keys Cylinder 2 brass keys per set. Key as requested (KA, KD, MCK, MK, GMK). KW1 standard with black powder matallergy cylinder housing. SC1 or SC4 optional. Latch Upper: 2-3/8 and 2-3/4 adjustable. (9092) Faceplate: 1 x 2-1/4 round corner. Bolt: Brass with hardened steel rod insert, full 1 throw. Lower: 2-3/8 and 2-3/4 adjustable (9079R). Faceplate: 1 x 2-1/4 round corner. Bolt: Solid brass 1/2 throw. Optional for UL latch. Strike Deadbolt: Full lip 1-3/4 x 2-1/4 round corner (9117). Handle: Full lip 1-3/4 x 2-1/4 round corner (9103). Door Handing Design Knob: Non-handed. Lever: Specify handing when ordering lever as interior. Panic-proof. INTERIOR SELECTIONS FUNCTIONS VENEZIA (VA) (Solid Brass) HARTFORD (HD) (Solid Brass) SHELBY (SY) ROYAL (RY) PALMER (PA) JURAN (JU) RITZ (RZ) MANHATTAN (MH) RUBY (RB) OLYMPUS (OS) BALA (BA) FINISHES Single Cylinder (400) Dummy (405) PVD Lifetime US3 Polish Brass US5 Antique Brass Oil Rubbed Bronze Tuscany Bronze Satin Nickel A Black Nickel/Pewter US26 Polish Chrome Not all styles available in all fi nishes. See fi nish chart on page 20 for details. R by PHILADELPHIA HARDWARE GROUP 4
400 SERIES HANDLESETS NEW! MAYFAIR (MA) IMPERIAL (IM) KELLINGTON (KN) 5
SPECIFICATIONS ANSI Grade 3 Door Prep Cross bore: 2-1/8 Backset Fits both 2-3/8 or 2-3/4. Door Fitting 1-3/8 ~ 1-3/4 door thick. 2 thick optional. Exposed Trim Forged brass, wrought brass, or zinc alloy. Keys 2 brass keys per set. Key as requested (KA, KD, MCK, MK, GMK). Cylinder KW1 standard. SC1 or SC4 optional. Latch Upper: 2-3/8 and 2-3/4 adjustable. (9092) Faceplate: 1 x 2-1/4 round corner. Bolt: Brass with hardened steel rod insert, full 1 throw. Lower: 2-3/8 and 2-3/4 adjustable (9079R for interior with brass lever or 9080R). Faceplate: 1 x 2-1/4 round corner. Bolt: Solid brass 1/2 throw. Optional for UL latch. Strike Deadbolt: Full lip 1-3/4 x 2-1/4 round corner (9117). Handle: Full lip 1-3/4 x 2-1/4 round corner (9103). Door Handing Knob: Non-handed. Lever: Specify handing when ordering lever as interior design. INTERIOR SELECTIONS FUNCTIONS VENEZIA (VA) (Solid Brass) FASCINITE (FE) (Solid Brass) HARTFORD (HD) (Solid Brass) LAFAYETTE (LA) (Solid Brass) ROYAL (RY) PALMER (PA) JURAN (JU) RITZ (RZ) MANHATTAN (MH) SHELBY (SY) ESCORT (ET) FINISHES RUBY (RB) OLYMPUS (OS) BALA (BA) GUARDIAN (GN) Single Cylinder (400) Dummy (405) Double Cylinder (410) PVD Lifetime US3 Polish Brass US5 Antique Brass Oil Rubbed Bronze Tuscany Bronze Satin Nickel A Black Nickel/Pewter US26 Polish Chrome Not all styles available in all fi nishes. See fi nish chart on page 20 for details. R by PHILADELPHIA HARDWARE GROUP 6
500TB SERIES LEVERSETS HARTFORD (HD) FASCINITE (FE) A LAFAYETTE (LA) VENEZIA (VA) 7
SPECIFICATIONS ANSI Grade 3 Door Prep Cross bore: 2-1/8 Backset Fits both 2-3/8 or 2-3/4. 2 and 2-1/4 thick optional. Door Fitting 1-3/8 ~ 1-3/4 door thick. Exposed Trim Forged brass or wrought brass. Keys 2 brass keys per set. Key as requested (KA, KD, MCK, MK, GMK). Cylinder KW1 standard. SC1 optional. Latch Entrance: 2-3/8 and 2-3/4 adjustable (9050R). Privacy/Passage: 2-3/8 and 2-3/4 adjustable (9079R). Faceplate: 1 x 2-1/4 round corner. Bolt: Solid brass 1/2 throw. Optional for UL latch. Strike Full lip 1-3/4 x 2-1/4 round corner (9103). Door Handing VA/FE: Handed levers (specify when ordering.) HD/LA: Non-handed levers (except for privacy function). Design Panic-proof. (privacy and bathroom only) FUNCTIONS Entrance function available for Hartford and Venezia only. Entrance (500TB) Passage (501TB) Privacy (panic-proof) (502TB) FINISHES (US26) Bathroom (panic-proof) (503TB) Dummy (515TB) PVD Lifetime US3 Polish Brass US5 Antique Brass Oil Rubbed Bronze Tuscany Bronze Satin Nickel A Black Nickel/Pewter US26 Polish Chrome Not all styles available in all fi nishes. See fi nish chart on page 20 for details. R by PHILADELPHIA HARDWARE GROUP 8
500T SERIES LOCKSETS NEW! PALMER (PA) NEW! SHELBY (SY) NEW! JURAN (JU) A RITZ (RZ) US3 ROYAL (RY) ESCORT (ET) US26 MANHATTAN (MH) US5 9
SPECIFICATIONS ANSI Grade 3 Door Prep Cross bore: 2-1/8. Backset Fits both 2-3/8 and 2-3/4. Door Fitting 1-3/8 ~ 1-3/4 door thick. 2 and 2-1/4 thick optional. Exposed Trim Stainless steel, brass or zinc alloy. Keys 2 brass keys per set. Key as requested (KA, KD, MCK, MK, GMK). Cylinder KW1 standard. SC1 optional. Latch Entrance: 2-3/8 and 2-3/4 adjustable (9045R). Privacy/Passage: 2-3/8 and 2-3/4 adjustable (9074). Faceplate: 1 x 2-1/4 round corner. Bolt: Zinc alloy 1/2 throw. Optional for UL latch. Strike Full lip 1-3/4 x 2-1/4 round corner (9103). Door Handing RY, RZ, JU, SY: Reversible lever design suitable for both right or left hand door. PA, MH & ET: Non-handed levers. Handing required for dummy function. REVERSIBLE LEVER DESIGN FUNCTIONS Entrance (500T) Passage (501T) Privacy (502T) Reversible Lever Suitable for both right or left handed door Bathroom (503T) (US26) Dummy (515T) FINISHES PVD Lifetime US3 Polish Brass US5 Antique Brass Oil Rubbed Bronze Tuscany Bronze Satin Nickel A Black Nickel/Pewter US26 Polish Chrome Not all styles available in all fi nishes. See fi nish chart on page 20 for details. R by PHILADELPHIA HARDWARE GROUP 10
100T SERIES LOCKSETS RUBY (RB) BALA (BA) A OLYMPUS (OS) US32D GUARDIAN (GN) US32D 11
SPECIFICATIONS Door Prep Cross bore: 2-1/8 Backset Fits both 2-3/8 and 2-3/4. Door Fitting 1-3/8 ~ 1-3/4 door thick. 2 and 2-1/4 thick optional. Exposed Trim Wrought brass or stainless steel. Keys 2 brass keys per set. Key as requested (KA, KD, MCK, MK, GMK). Cylinder KW1 standard. SC1 optional. Latch Entrance: 2-3/8 and 2-3/4 adjustable (9073). Privacy/Passage: 2-3/8 and 2-3/4 adjustable (9074). Faceplate: 1 x 2-1/4 round corner. Bolt: Zinc alloy 1/2 throw. Optional for UL latch. Strike Full lip 1-3/4 x 2-1/4 round corner (9103). Door Handing Non-handed. ANSI Grade 3 COMBOSET 300T Series 300T US32D FUNCTIONS ESCUTCHEON PLATE 5 CENTER TO CENTER Entrance (100T) Passage (101T) Privacy (102T) Bathroom (103T) (US26) Dummy (115T) US3 FINISHES PVD Lifetime US3 Polish Brass US5 Antique Brass Oil Rubbed Bronze Tuscany Bronze Satin Nickel A Black Nickel/Pewter US26 Polish Chrome Not all styles available in all fi nishes. See fi nish chart on page 20 for details. R by PHILADELPHIA HARDWARE GROUP 12
200B SERIES ANSI Grade 3 SINGLE CYLINDER SPECIFICATIONS DOUBLE CYLINDER US32D ONE SIDED (Full Bore) ONE SIDED (Half Bore) US3 Door Prep Cross bore: 2-1/8 Mounting bore for 205B is 1-3/4 Backset Fits both 2-3/8 and 2-3/4. Door Fitting 1-3/8 ~ 1-3/4 door thick. 2-2-1/4 thick optional. Exposed Trim Brass, stainless steel, or zinc alloy. Keys 2 brass keys per set. Key as requested (KA, KD, MCK, MK, GMK). Cylinder KW1 standard. SC1 optional. Latch Full 1 throw bolt, adjustable for 2-3/8 and 2-3/4 backset. Faceplate: 1 x 2-1/4 round corner. Bolt: Stainless steel with hardened steel rod insert. Optional for UL latch. Strike Standard: Full lip 1-3/4 x 2-1/4 round corner (9117). FUNCTIONS Single Cylinder (200B) FINISHES Double Cylinder (210B) One Sided (Full Bore) (206B) One Sided (Half Bore) (205B) PVD Lifetime US3 Polish Brass US5 Antique Brass Oil Rubbed Bronze Tuscany Bronze Satin Nickel A Black Nickel/Pewter US26 Polish Chrome Not all styles available in all fi nishes. See fi nish chart on page 20 for details. 13
HANDLE US3 US5 A US26 Cross bore: 2-1/8 DOOR LOCK A US26 US3 US5 SPECIFICATIONS FUNCTIONS Door Prep Door Fitting Exposed Trim Strike 2-1/4 H x 1-3/4 W notch. 1-3/8 ~ 1-3/4 door thick. Brass, stainless steel, or zinc alloy. 1 x 2-1/4 rectangular. FINISHES Passage Privacy PVD Lifetime US3 Polish Brass US5 Antique Brass Oil Rubbed Bronze Tuscany Bronze Satin Nickel A Black Nickel/Pewter US26 Polish Chrome Not all styles available in all fi nishes. See fi nish chart on page 20 for details. R by PHILADELPHIA HARDWARE GROUP 14
IL/IR SERIES UL R LISTED 301IL-CT Charlotte (CT) Lever 300IL-SD San Diego (SD) Lever 300IR-HD Hartford (HD) Lever 300IL-RY Royal (RY) Lever IL Series: Lock with square escutcheon plate. IR Series: Lock with round escutcheon plate. 15
R SPECIFICATIONS ANSI Grade 2 Door Prep Cross bore: 2-1/8 Mounting (center to center): 4 Backset Fits both 2-3/8 and 2-3/4. Door Fitting 1-3/8 ~ 1-3/4 door thick. 2 thick optional. Exposed Trim Wrought brass or stainless steel. Lever is zinc alloy. Keys 2 brass keys per set. Key as requested (KA, KD, MCK, MK, GMK). Cylinder KW1 standard. SC1 and SC4 optional. Latch UL Latch standard for both deadbolt and handle. 3hrs fire rated. UL Upper deadbolt: 2-3/8 and 2-3/4 adjustable (9092UL). LISTED Bolt: Solid brass 1/2 throw with hardened steel rod insert. Faceplate: 1 x 2-1/4 round corner. Lower handle: 2-3/8 or 2-3/4 Bolt: Stainless steel 3 hrs fire rated. Entrance/Single Locking: 2-3/8 backset (9035KUL), 2-3/4 backset (9036KUL) Entrance/Double Locking and Storeroom/Double Locking: 2-3/8 backset (9061UL), 2-3/4 backset (9062UL). Faceplate: 1 x 2-1/4 round corner. Strike Deadbolt: Full lip 1-3/4 x 2-1/4 round corner (9111). Handle: Standard 1-1/8 x 2-3/4 T strike (9106). Door Handing Universal, non-handing (except for RY lever). Design Lock can be mounted with or without exterior escutcheon plate. FUNCTIONS Entrance Single Locking (301IL/301IR) Entrance Double Locking (300IL/300IR) Storeroom Double Locking (304IL/304IR) Mounting without Exterior Escutcheon Plate FINISHES PVD Lifetime US3 Polish Brass US5 Antique Brass Oil Rubbed Bronze Tuscany Bronze Satin Nickel A Black Nickel/Pewter US26 Polish Chrome Not all styles available in all fi nishes. See fi nish chart on page 20 for details. R by PHILADELPHIA HARDWARE GROUP 16
2-3/8 and 2-3/4 CHATEAU (CH) 1-3/8 ~ 2 2-27/32 3-1/16 RICHMOND (RI) 2-3/8 and 2-3/4 1-3/8 ~ 2 3-1/8 2-3/8 and 2-3/4 HAMPTON (HA) 1-3/8 ~ 2 2-27/32 15-29/32 5-1/2 2-9/16 4-7/32 Venezia 16-3/4 10-9/32 2-13/32 5-1/2 2-9/16 4-9/64 Royal 15-27/32 5-1/2 2-9/16 4-1/16 Hartford 7-15/16 7-15/16 7-15/16 2-3/4 2-53/64 2-53/64 2-53/64 FAIRMONT (FT) 1-3/8-2 5/8 5/8 2-53/64 2-19/32 MAYFAIR (MA) 1-3/8" ~ 1-3/4" 1-3/32 1" IMPERIAL (IM) 1-3/8" ~ 1-3/4" 1-7/64" 1" 2-3/8" 3-11/32 3-35/64" 10-5/8 5-1/2 9-39/64 3" 2-31/64 2-41/64 2" 2-9/16 5" or 5-1/2 2-43/64 2-31/64" 2-41/64" 2" 2-9/16" 5" or 5-1/2 11-29/32 12-1/8" 16-55/64 2-9/16 4-9/64 8-27/64 8-27/64" 1-5/64 8-27/64 1-57/64 1-39/64" 3-1/2 KELLINGTON (KN) 2-3/64 3 or 17
FASCINITE (FE) JURAN (JU) PALMER (PA) HARTFORD (HD) SHELBY (SY) RITZ (RZ) 1-3/8" 1-3/4" 1-57/64" 2-21/64" 2-9/16" LAFAYETTE (LA) 1-3/8" - 1-3/4 2-13/32" 2-13/32" 2-9/16" ROYAL (RY) 1-3/8" 1-3/4" 2-3/16" 2-21/32" 3-45/64" 2-9/16" 4-1/16" 4-3/32" ESCORT (ET) VENEZIA (VA) MANHATTAN (MH) 1-3/8" 1-3/4" 1-57/64" 2-21/64" 2-9/16" 3-45/64" R by PHILADELPHIA HARDWARE GROUP 18
BALA (BA) SINGLE DEADBOLT IL SERIES (CT Lever) 3-19/64 3-1/16 4-11/64 2-9/16 2-9/16 1-3/8 ~ 1-3/4 1-5/8 ~ 2 3-19/64 3-1/16 4 8-29/32 1-63/64 8-29/32 4 8-29/32 RUBY (RB) DOUBLE DEADBOLT IR SERIES (HD Lever) ONE SIDED DEADBOLT HALF BORE OLYMPUS (OS) 4-11/64 2-9/16 2-9/16 1-3/8 ~ 1-3/4 1-5/8 ~ 2 4-11/64 GUARDIAN (GN) ONE SIDED DEADBOLT FULL BORE 2-3/4 Sliding Door Lock 2-1/4 19
400 RICHMOND CHATEAU HAMPTON FAIRMONT 400 IMPERIAL MAYFAIR KELLINGTON 500T ROYAL MANHATTAN RITZ ESCORT PALMER JURAN SHELBY 500TB FASCINITE VENEZIA LAFAYETTE HARTFORD 100T RUBY BALA OLYMPUS GUARDIAN 300IL/IR IL IR 200B DEADBOLT 300T COMBO SC 310T COMBO DC NA Sliding Door Lock AVAILABILITY SERIES ITEM PVD US3 A US26 US26D US5 US32D Product avaialble in stock. Please refer to price book for details. Other fi nishes may be available upon request. Please allow longer lead time, min. 300 lock order. Lock Strikes 9101 9102 9103 9108 9125 1-1/8 x 2-3/4 T type with tab 1-3/4 x 2-1/4 Full lip with tab square corner 1-3/4 x 2-1/4 Full lip with tab 1/4 radius round corner 1-3/4 full round with tab for tubular type drive-in latch 1-1/4 x 2-3/4 T type adjustable Deadbolt Strikes 9111 9112 9113 9117 9119 1-1/8 x 2-3/4 Rectangular square corner 1 x 2-1/4 Rectangular square corner 1 x 2-1/4 Rectangular 1/4 radius round corner 1-3/4 x 2-1/4 Full lip 1/4 radius round corner 1-1/4 x 3-5/8 Security strike 1/4 radius round corner Keys KW1 5-Pins SC1 5-Pins SC4 6-Pins 9301-K KW1 TE5 HK5 SC5 HK6 SC6 9301-S SC1 & SC4 R by PHILADELPHIA HARDWARE GROUP 20
Dead Latches for 100T Entrance Optional: 9071 square corner, 9071UL UL square corner, 9073UL UL round corner. 9073 Mortise Dead Latch 1 x 2-1/4 Round Corner Faceplate Dead Latches for 500TB Entrance Optional: 9050 square corner, 9050UL UL square corner, 9050UL UL round corner. Latches for 200B Optional: 9091 square corner, 9091UL UL square corner, 9072UL UL round corner. 9092 Mortise Deadbolt Latch 1 x 2-1/4 Round Corner Faceplate 9075 Drive-in Dead Latch 1 Diameter 9050R Mortise Dead Latch (Brass Bolt) 1 x 2-1/4 Round Corner Faceplate 9093 Drive-in Deadbolt Latch 1 Diameter Spring Latches for 101T, 102T, 501TZ, 502TZ Optional: 9072 square corner, 9072UL UL square corner, 9074UL UL round corner. 9074 9050C Drive-in Dead Latch (Brass Bolt) 1 Diameter Spring Latches for 400 Handleset (MA/IM/CA/KN) Optional: 9080 square corner, 9080UL UL square corner, 9080UL UL round corner. Mortise Spring Latch 1 x 2-1/4 Round Corner Faceplate 9076 Drive-in Spring Latch 1 Diameter Dead Latches for 500TZ Entrance Optional: 9045 square corner, 9045UL UL square corner, 9045RUL UL round corner. Spring Latches for 400 Interconnected Handleset (RI/CH/HA/FT), 501TB, 502TB, and 400 Handleset (MA/IM/KN) with Solid Brass lever (VA/HD/FE/LA) Optional: 9079 square corner, 9079UL UL square corner, 9079UL UL round corner. 9079R Parts 9080R Mortise Spring Latch 1 x 2-1/4 Round Corner Faceplate 9080C Drive-in Spring Latch 1 Diameter 9045R Mortise Dead Latch 1 x 2-1/4 Round Corner Faceplate Mortise Spring Latch (Brass Bolt) 1 x 2-1/4 Round Corner Faceplate 9079C 9782 4-way plate 4-way plate is available for all drive-in latches to convert into 1 x 2-1/4 square mortise latch. 9045C Drive-in Dead Latch 1 Diameter Drive-in Spring Latch (Brass Bolt) 1 Diameter 21
R R Trim Selection Solid Brass surface bolt 3, 4, 6 and 12 Flush Bolt 6 round/square Mortise in flush bolt 7 round UL LISTED Mortise in extension fl ush bolt Ball catch 2-1/4 x 1 Drive-in ball catch bore: 7/8 Heavy duty roller catch Heavy duty jumbo roller catch Door viewer 180 degree 1/2 barrel 160 degree 1/2 barrel 200 degree 9/16 barrel 160 degree 1/2 barrel UL LISTED 4 door knocker w/160 degree viewer Solid Brass 6 door knocker with or without viewer Finger pull 2-1/8 dia. with nail or drive in type Spring door stop 3 Jumbo spring door stop 3 and 3-3/4 Rigid door stop 3 H.D. rigid door stop 3 3 solid brass door stop Dome stop low profi le Dome stop high profi le Hinge pin type door stop K type A type Half leaf hinge pin door stop Door saver 4 Drop Down Door Holder Wall bumper 2-1/2 and 1 Gooseneck door stop 2-3/4 2-1/8 Wall door stop w/hook Floor door stop w/hook 3 hand rail bracket H.D. hand rail bracket Decorative hand rail bracket Safety door guard w/angle protector, Shim available Chain door stop with vinyl cover or single spring Adjustable shelf & rod support 10-1/4 x 10 Shelf & rod support 10-7/8 x 9-5/8 Adjustable shelf support, no hook 10-1/4 x 10 H.D. shelf & rod support 10-7/8 x 10 H.D. shelf support, no hook 10-1/4 x 10 Adjustable closet rod 18-30, 30-48, 48-72,72-96, 72-120 Shelf bracket 8 x 10 10 x 12 Closet pole socket -White Closet pole socket -Metal -H.D. Metal Cafe door hinge set House Numbers 6 Black 4 /6 Solid Brass 4 Metal Pull plate Push plate 3-1/2 x 15 4 x 16 Kick plate 6 x 34, 8 x 28 8 x 34, 10 x 34 Cabinet knob BI-fold door knob with or without back plate Grab bar wall clearance: 1-1/2 R by PHILADELPHIA HARDWARE GROUP 22
DISTRIBUTION BY: Philadelphia Hardware Group, Inc. SAN DIEGO DISTRIBUTION CENTER (Home Offi ce) 6590 Top Gun Street San Diego, CA 92121 Tel: (858) 642-0450 Fax: (858) 642-0454 Toll Free Tel: 1-800-545-2309 Toll Free Fax: 1-800-828-0988 philihardware.com CHICAGO DISTRIBUTION CENTER 3687 Darlene Court Aurora, IL 60504 Tel: (630) 692-0316 Fax: (630) 692-0320 Toll Free Tel: 1-800-406-5138 SEATTLE DISTRIBUTION CENTER 3705 166th Place N.E. Arlington, WA 98223 Tel: (360) 659-7680 Fax: (360) 659-7401 Toll Free Tel: 1-800-333-5156 Toll Free Fax: 1-800-596-5156 Copyright 2010 Philadelphia Hardware Group, Inc. All rights reserved.