QUAD 2 INPUT NAND GATE PROPAGATION DELAY TIME t PD = 60ns (Typ.) at V DD = 10V BUFFERED INPUTS AND OUTPUTS STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS QUIESCENT CURRENT SPECIFIED UP TO 20V 5V, 10V AND 15V PARAMETRIC RATINGS INPUT LEAKAGE CURRENT I I = 100nA (MAX) AT V DD = 18V T A = 25 C 100% TESTED FOR QUIESCENT CURRENT MEETS ALL REQUIREMENTS OF JEDEC JESD13B " STANDARD SPECIFICATIONS FOR DESCRIPTION OF B SERIES CMOS DEVICES" DESCRIPTION The HCF4011B is a monolithic integrated circuit fabricated in Metal Oxide Semiconductor technology available in DIP and SOP packages. The HCF4011B QUAD 2 INPUT NAND GATE provides the system designer with direct PIN CONNECTION ORDER CODES PACKAGE TUBE T & R DIP HCF4011BEY SOP HCF4011BM1 HCF4011M013TR implementation of the NAND function and supplement the existing family of CMOS gates. All inputs and outputs are buffered. DIP SOP September 2001 1/7
INPUT EQUIVALENT CIRCUIT PIN DESCRIPTION LOGIC DIAGRAM ABSOLUTE MAXIMUM RATINGS TRUTH TABLE Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. All voltage values are referred to V SS pin voltage. RECOMMENDED OPERATING CONDITIONS PIN No SYMBOL NAME AND FUNCTION 1, 2, 5, 6, 8, 9, 12, 13 A, B, C, D, E, F, G, H Data Inputs 3, 4, 10, 11 J, K, L, M Data Outputs 7 V SS Negative Supply 14 V DD Positive Supply INPUTS OUTPUTS A, C, E, G B, D, F, H J, K, L, M L L H L H H H L H H H L Symbol Parameter Value Unit V DD Supply -0.5 to +22 V V I DC Input -0.5 to V DD + 0.5 V I I DC Input Current ± 10 ma P D Power Dissipation per Package 200 mw Power Dissipation per Output Transistor 100 mw T op Operating Temperature -55 to +125 C T stg Storage Temperature -65 to +150 C Symbol Parameter Value Unit V DD Supply 3 to 20 V V I Input 0 to V DD V T op Operating Temperature -55 to 125 C 2/7
DC SPECIFICATIONS Test Condition Value Symbol Parameter V I (V) V O (V) I O (µa) The Noise Margin for both "1" and "0" level is: 1V min. with V DD =5V, 2V min. with V DD =10V, 2.5V min. with V DD =15V DYNAMIC ELECTRICAL CHARACTERISTICS (T amb = 25 C, C L = 50pF, R L = 200KΩ, t r = t f = 20 ns) (*) Typical temperature coefficient for all V DD value is 0.3 %/ C. V DD (V) T A = 25 C -40 to 85 C -55 to 125 C Min. Typ. Max. Min. Max. Min. Max. I L Quiescent Current 0/5 5 0.01 0.25 7.5 7.5 0/10 10 0.01 0.5 15 15 0/15 15 0.01 1 30 30 µa 0/20 20 0.02 5 150 150 V OH High Level Output 0/5 <1 5 4.95 4.95 4.95 0/10 <1 10 9.95 9.95 9.95 V 0/15 <1 15 14.95 14.95 14.95 V OL Low Level Output 5/0 <1 5 0.05 0.05 0.05 10/0 <1 10 0.05 0.05 0.05 V 15/0 <1 15 0.05 0.05 0.05 V IH High Level Input 0.5/4.5 <1 5 3.5 3.5 3.5 1/9 <1 10 7 7 7 V 1.5/13.5 <1 15 11 11 11 V IL Low Level Input 4.5/0.5 <1 5 1.5 1.5 1.5 9/1 <1 10 3 3 3 V 13.5/1.5 <1 15 4 4 4 I OH Output Drive 0/5 2.5 <1 5-1.36-3.2-1.15-1.1 Current 0/5 4.6 <1 5-0.44-1 -0.36-0.36 0/10 9.5 <1 10-1.1-2.6-0.9-0.9 ma 0/15 13.5 <1 15-3.0-6.8-2.4-2.4 I OL Output Sink 0/5 0.4 <1 5 0.44 1 0.36 0.36 Current 0/10 0.5 <1 10 1.1 2.6 0.9 0.9 ma 0/15 1.5 <1 15 3.0 6.8 2.4 2.4 I I Input Leakage Current 0/18 Any Input 18 ±10-5 ±0.1 ±1 ±1 µa C I Input Capacitance Any Input 5 7.5 pf Test Condition Value (*) Unit Symbol Parameter V DD (V) Min. Typ. Max. t PLH t PHL Propagation Delay Time 5 125 250 10 60 120 ns 15 45 90 t TLH t THL Output Transition Time 5 100 200 10 50 100 ns 15 40 80 Unit 3/7
TEST CIRCUIT C L = 50pF or equivalent (includes jig and probe capacitance) R L = 200KΩ R T = Z OUT of pulse generator (typically 50Ω) WAVEFORM : PROPAGATION DELAY TIMES (f=1mhz; 50% duty cycle) 4/7
Plastic DIP-14 MECHANICAL DATA DIM. mm. inch MIN. TYP MAX. MIN. TYP. MAX. a1 0.51 0.020 B 1.39 1.65 0.055 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 15.24 0.600 F 7.1 0.280 I 5.1 0.201 L 3.3 0.130 Z 1.27 2.54 0.050 0.100 P001A 5/7
SO-14 MECHANICAL DATA DIM. mm. inch MIN. TYP MAX. MIN. TYP. MAX. A 1.75 0.068 a1 0.1 0.2 0.003 0.007 a2 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45 (typ.) D 8.55 8.75 0.336 0.344 E 5.8 6.2 0.228 0.244 e 1.27 0.050 e3 7.62 0.300 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M 0.68 0.026 S 8 (max.) PO13G 6/7
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics 2001 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom http://www.st.com 7/7