Features Excellent performance in high current applications Non-polar, surface mountable Superior filtering characteristics Superb ability to withstand transient voltages and surge Offers exceptional solderability and resistance to solder heat vailable in 63, 85, 15 and 186 body size Two amp current rating available vailable lead free/rohs Compliant pplications Cellular telephones and base stations Telecommunication equipment Industrial electronic interface or programmable controllers Electronic automotive equipment Computer and peripheral equipment Circuit Schematic Input Output Typical Electrical Characteristics Capacitance Range................. COG (NPO) pf to pf..................... X7R pf to, pf..................... YV5, pf and 2, pf Capacitance Tolerance.............. COG (NPO) +/-%..................... X7R +/-%..................... Y5V +8/-% Temperature Coefficient.............. COG (NPO) ±/ ppm/ C,..................... -55 to +125 C..................... X7R +/-15%,..................... -55 to +125 C..................... Y5V -25 to +85 C Insulation Resistance.............. up to, pf MΩ....................., pf MΩ DC Resistance...............4 mp or less.3 Ohm max...................... 1 mp.8 Ohm max...................... 2 mp.4 Ohm max. Rated Voltage................ up to VDC Rated Current............... up to 2 mps SPECTRUM CONTROL INC. 831 vonia Rd. Fairview, P 16415 Phone: 814-4-27 Fax: 814-4-28 Web site: www.specemc.com 35
Insertion Loss (Per MIL-STD-2) SF63 Series Insertion loss (db) SF85 Series.4 mp 8 7 6 2 1, 2, 1 SF15 Series.3 and.5 mps 8 7 6 2 2 2.1 1.3 mp 8 7 6, 2 1, 2, 1 Insertion loss (db) 1 mp 8 7 6.1.1 1 8 1 mp 7 6, 1 1 mp 8 7 6,.1 1 SF186 Series.3 mp 8 8 2 mp 7 7 6,, 1, 2, 2 1 6 2,.1 1 1, 36 SPECTRUM CONTROL INC. 831 vonia Rd. Fairview, P 16415 Phone: 814-4-27 Fax: 814-4-28 Web site: www.specemc.com
Selection Guide Rated Rated IR DC Body Capacitance Capacitance Temp. Voltage Current (Megohms Resistance Operating Part Number Size (in picofarad) Tolerance Charact. (Volts DC) (mps DC) Min.) (ohm Max.) Temp. SF63C2SBNB-* 63 +/-% COG.3,.3-55/+125 C SF63CSBNB-* 63 +/-% COG.3,.3-55/+125 C SF63C1SBNB-* 63 +/-% COG.3,.3-55/+125 C SF63C1SBNB-* 63 2 +/-% COG.3,.3-55/+125 C SF63X1SBNB-* 63 +/-% X7R.3,.3-55/+125 C SF63X2SBNB-* 63 1, +/-% X7R.3,.3-55/+125 C SF63X2SBNB-* 63 2, +/-% X7R.3,.3-55/+125 C SF63X3SNC-* 63, +/-% X7R 25.5,.15-55/+125 C SF63Y4SND-* 63, +8/-% Y5V 25 1 1,.8-25/+85 C SF85C2SBNC-* 85 +/-% COG.4,.3-55/+125 C SF85CSBNC-* 85 +/-% COG.4,.3-55/+125 C SF85C1SBNC-* 85 +/-% COG.4,.3-55/+125 C SF85C1SBNC-* 85 2 +/-% COG.4,.3-55/+125 C SF85X1SBNC-* 85 +/-% X7R.4,.3-55/+125 C SF85X2SBNC-* 85 1, +/-% X7R.4,.3-55/+125 C SF85X2SBNC-* 85 2, +/-% X7R.4,.3-55/+125 C SF85X3SBND-* 85, +/-% X7R 1.,.8-55/+125 C SF15C2SBNB-* 15 +/-% COG.3,.3-55/+125 C SF15CSBNB-* 15 +/-% COG.3,.3-55/+125 C SF15C1SBNB-* 15 +/-% COG.3,.3-55/+125 C SF15C1SBNB-* 15 2 +/-% COG.3,.3-55/+125 C SF15X1SBNB-* 15 +/-% X7R.3,.3-55/+125 C SF15X2SBNB-* 15 1, +/-% X7R.3,.3-55/+125 C SF15X2SBNB-* 15 2, +/-% X7R.3,.3-55/+125 C SF15X3SBNB-* 15, +/-% X7R.3,.3-55/+125 C SF15X3SBND-* 15, +/-% X7R 1. 5,.8-55/+125 C SF186C2SDNB-* 186 +/-% COG.3,.3-55/+125 C SF186CSDNB-* 186 +/-% COG.3,.3-55/+125 C SF186C1SDNB-* 186 +/-% COG.3,.3-55/+125 C SF186C1SDNB-* 186 2 +/-% COG.3,.3-55/+125 C SF186C1SDNB-* 186 +/-% COG.3,.3-55/+125 C SF186X2SDNB-* 186 1, +/-% X7R.3,.3-55/+125 C SF186X2SDNB-* 186 2, +/-% X7R.3,.3-55/+125 C SF186X3SDNB-* 186, +/-% X7R.3,.3-55/+125 C SF186X3SDNB-* 186, +/-% X7R.3,.3-55/+125 C 2 MP FILTER SF186Y4ZBNE-* 186 2, +8/-% Y5V 2. 1,.4-25/+85 C Bold Letter = High Current pplications = Temperature Characteristic is +/-8% -* = Denotes Packaging Style. Replace with T for Tape and Reel or B for Bulk SPECTRUM CONTROL INC. 831 vonia Rd. Fairview, P 16415 Phone: 814-4-27 Fax: 814-4-28 Web site: www.specemc.com 37
LE LM LE Surface Mount EMI Filters L T W Mechanical Dimensions End Middle Body Body Body Terminal Terminal Body Length Width Thickness Length Length Style/Size (L) (W) (T) (LE) (LM).63 +/-.6.31 +/-.6.23 +/-.6.8 +/-.6. +/-.6 SF63 (1.6 +/-.15) (.8+/-.15) (.6+/-.15) (.2 +/-.15) (.5 +/-.15) SF85.79 +/-.8.49 +/-.8.32 +/-.8.12 +/-.8.24 +/-.8 (2. +/-.2) (1.25 +/-.2) (.8 +/-.2) (.3 +/-.2) (.6 +/-.2) SF15.126 +/-.8.49 +/-.8.28 +/-.8.16 +/-.12.43 +/-.12 (3.2 +/-.2) (1.25 +/-.2) (.7 +/-.2) (.4 +/-.3) (1.1 +/-.3) SF186.177 +/-.12.63 +/-.12.39 +/-.12. +/-.12.55 +/-.12 (4.5 +/-.3) (1.6 +/-.3) (1. +/-.3) (.5 +/-.3) (1.4 +/-.3) Ordering Information Example: SF85C1SBNCT This part number represents a three terminal chip with a body size of 85 with a COG (NPO) dielectric. The capacitance is 2 pf with a capacitance tolerance of +%/-%. Voltage rating is Volts DC. It has nickel barrier, solder plated terminations and a current rating of.4 mp, ( milliamps). The parts are taped and reeled. SF 85 C 1 S B N C T Style Size Ceramic Capacitance Capacitance Rated Termination Current Packaging Code Tolerance Voltage (Vdc) Rating SF 63 C - COG First Two S - +%/-% - 25 N - Ni Barrier, B -.3 T -Tape 85 X - X7R Numbers are Z - +8%/-% B - Solder C -.4 and Reel 15 Y - Y5V Significant, D - Plated D - 1 B - Bulk 186 the Third E - 2 Number F - 3 Refers to G - 4 Number of H - 5 Zeroes I - 6 38 SPECTRUM CONTROL INC. 831 vonia Rd. Fairview, P 16415 Phone: 814-4-27 Fax: 814-4-28 Web site: www.specemc.com
Soldering Specifications Soldering Instructions Reflow Soldering Flow Soldering C Recommended Board Pattern Top view Connects to top Bottom view Recommended Board Pattern Top view E D F Bottom view B Through hole.16 to.24 (.4 to.6) Copper Copper Resist B C Connects to top Through hole.16 to.24 (.4 to.6) Reflow Soldering Recommended Solder Temperature Profile Degrees (C) 2 1 Board Pattern Body Dimension Style/Size B C SF63. (.5). (1.2).31 (.8) SF85.24 (.6).59 (1.5).39 (1.) SF15.51 (1.3).91 (2.3). (1.2) SF186.79 (2.).138 (3.5).51 (1.3) Preheat Solder Cool down 1 to 1 C 6-1 2 to 2 C max. 1 min. Seconds General Soldering Notes 1. High soldering temperatures and long soldering times can cause leaching of the termination and adversely affect adhesion. These conditions can also decrease capacitance value. Use the above recommended solder temperature cycle. 2. Due to the mechanical characteristic of ceramic composition, aggressive thermal shock will degrade performance. Preheat the assembly before soldering using the above solder temperature profile as a guide. Flow Soldering Board Pattern Body Dimension Style/Size B C D E F SF63. (.5).31 (.8). (1.2).31 (.8).71.16 (1.8) (.4) SF85.24 (.6).31 (.8).59 (1.5).39 (1.).87 (2.2).24 (.6) SF15.51 (1.3).59 (1.5).91 (2.3). (1.2).118 (3.).24 (.6) SF186.59 (1.5).79 (1.5).138 (3.5).51 (1.3).118 (3.).24 (.6) Recommended Solder Temperature Profile Degrees (C) 2 1 Preheat Solder Cool down 1 to 1 C 6-1 2 to 2 C 3-4 1 min. Seconds 3. Use mild flux (less than.2% by weight of Chlorine), preferable rosin based. If water soluble, wash thoroughly to assure all residue is removed from the underside of components. 4. Ultrasonic Cleaning When using an ultrasonic cleaning method, the following range is recommended: Frequency: Not to exceed 28KHz Output Power: Not to exceed W/liter Cleaning Time: 5 minutes max SPECTRUM CONTROL INC. 831 vonia Rd. Fairview, P 16415 Phone: 814-4-27 Fax: 814-4-28 Web site: www.specemc.com 39
Package Information Paper Tape Dimensions SF85 and SF15 Bodies Surface Mount EMI Filters Packaging Specifications D1 C C1 C2 E T1 Package Quantities W B F Body Style/Size SF63 SF85 SF15 SF186 Tape and Reel 4, units/reel 4, units/reel 4, units/reel 2, units/reel Chip Cavity Tape Holes Hole Diameter Thickness Body Center Indexing Center Indexing Indexing to Carrier Style/ Length Width Width to End to End to Center to Center Indexing Indexing Overall Tape Size B W F E C C1 C2 D1 T (Max.) T1 (Max.).39.75.315.138.69.157.79.157.59.43.39 SF63 +/-.? +/-.? +/-.12 +/-.2 +/-.4 +/-.4 +/-.4 +/-.8 +.4/- (1. +/-.?) (1.9+/-.?) (8. +/-.3) (3.5 +/-.5) (1.75 +/-.1) (4. +/-.1) (2. +/-.1) (4. +/-.1) (1.5 +.1/-) (1.1) (1.).64.91.315.138.69.157.79.157.59.43.39 SF85 +/-.8 +/-.8 +/-.12 +/-.2 +/-.4 +/-.4 +/-.4 +/-.8 +.4/- (1.62 +/-.2) (2.3 +/-.2) (8. +/-.3) (3.5 +/-.5) (1.75 +/-.1) (4. +/-.1) (2. +/-.1) (4. +/-.1) (1.5 +.1/-) (1.1) (1.).67.138.315.138.69.157.79.157.59.43.39 SF15 +/-.8 +/-.8 +/-.12 +/-.2 +/-.4 +/-.4 +/-.4 +/-.8 +.4/- (1.7 +/-.2) (3.5 +/-.2) (8. +/-.3) (3.5 +/-.5) (1.75 +/-.1) (4. +/-.1) (2. +/-.1) (4. +/-.1) (1.5 +.1/-) (1.1) (1.) T Plastic Reel Dimensions Body Style/Size Diameter (Max.) Width (Max.) SF63 7. (18).46 (11.5) SF85 7. (18).46 (11.5) SF15 7. (18).46 (11.5) SF186 7. (18).61 (11.5) Package Information Tape and Reel Specification Plastic Carrier Tape Dimensions SF186 Body D1 C C1 C2 Chip Cavity Tape Holes Hole Diameter Thickness Body Center Indexing Center Indexing Indexing to Style/ Length Width Width to End to End to Center to Center Indexing Center Indexing Overall Tape Size B W F E C C1 C2 D (Min.) D1 T (Max.) T1 (Max.).71.185.2.217.69.157.79.157.59.59.98.24 SF186 +/-.8 +/-.8 +/-.8 +/-.2 +/-.4 +/-.4 +/-.4 +/-.8 +.4/- (1.8 +/-.2) (4.7 +/-.2) (12. +/-.2) (5.5 +/-.5) (1.75 +/-.1) (4. +/-.1) (2. +/-.1) (4. +/-.1) (1.5) (1.5 +.1/-) (2.5) (.6) W B ød Center hole E F T T1 SPECTRUM CONTROL INC. 831 vonia Rd. Fairview, P 16415 Phone: 814-4-27 Fax: 814-4-28 Web site: www.specemc.com
LC Features High efficiency EMI surface mount filter Ideally suited for high frequency signal lines Steep insertion loss (IL) characteristics vailable in 63, 85 and 16 body sizes LC63 Style Insertion loss (Reference) LC Typical Electrical Characteristics Cut-off Frequency Ranges........ MHz to 2 MHz ± % Rated Voltage........... 25 Volt Rated Current........... m IR................... MΩ min. Operating Temperature Range....... - C to +85 C LZ Features Monolithic construction of dielectric and ferrite materials Band stop filter with a choice of rejected frequency band K 1 LC63M3MN 2 LC63M3MN 3 LC63M4MN LC85 Style M M 1G Insertion loss (Reference) G Little delay and distortion from original signal wave vailable in the 2 and 63 body sizes LZ Typical Electrical Characteristics Center Frequency Ranges........ MHz to 2, MHz ± % Rated Current........... m and m Rejected Bandwidth........5 dec. to 1.5 dec. Operating Temperature Range....... -25 C to +85 C LC/LZ pplications K 1 LC85M3MN 2 LC85M3MN 3 LC85M3MN 4 LC85M4MN 5 LC85M4MN LC16 Style 1M M M 1G Insertion loss (Reference) G Telecommunication equipment, fax, modem, and DSL Computer and peripheral equipment Digital V equipment, such as TV, VCR and DVD Digital circuit equipment noise countermeasure 1 LC16M3MN 2 LC16M3MN 3 LC16M3MN 4 LC16M4MN K 1M M M 1G G SPECTRUM CONTROL INC. 831 vonia Rd. Fairview, P 16415 Phone: 814-4-27 Fax: 814-4-28 Web site: www.specemc.com 41
Specifications Part Number Body Cut-off Frequency Cut-off Frequency Size (MHz) Tolerance LC63M3MN-* LC63M3MN-* 63 LC63M4MN-* LC85M3MN-* LC85M3MN-* LC85M3MN-* 85 ± % LC85M4MN-* LC85M4MN-* 2 LC16M3MN-* LC16M3MN-* 16 LC16M3MN-* LC16M4MN-* -* Denotes packaging style, replace with T for tape and reel or B for bulk Rated Voltage Rated Current I.R. (Min.) Temperature Range 25 V m MΩ - C +85 C Ordering Information Example: LC16M3MNT This part number represents an LC EMI filter chip with a body size of 16. The cut-off frequency is MHz with a tolerance of ± %, voltage rating is 25 Volts DC. It has nickel barrier, solder plated termination and a current rating of.1 mp ( milliamps). The parts are taped and reeled. LC 16 M3 M N T Style Size Cut-off Cut-off Rated Termination Rated Packaging Frequency Tolerance Voltage Current LC 63 M3 = MHz M = ± % = 25 VDC N = Ni Barrier, =.1 T = Tape 85 Solder Plated ( m) and Reel 16 B = Bulk 42 SPECTRUM CONTROL INC. 831 vonia Rd. Fairview, P 16415 Phone: 814-4-27 Fax: 814-4-28 Web site: www.specemc.com
Specifications Part Number LZ2Z824MBNB-* LZ2B5MBNB-* LZ2Y155MBNB-* LZ2Y5MBNB-* LZ633MCN-* LZ633MCN-* LZ633MCN-* LZ634MCN-* LZ63B3MCN-* LZ63B4MCN-* LZ63B4MCN-* LZ63C4MDN-* Body Size 2 63 Cut-off Frequency (MHz) 8 1, 1, 2, 2 Cut-off Frequency Tolerance ± % Rejected Bandwidth (dec.).75 1. 1.25 1.25.5.5.5.5 1. 1. 1. 1.5 Max. Insertion Loss db 15 db db Rated Current m m Operating Temperature Range -25 C +85 C -* Denotes packaging style, replace with T for tape and reel or B for bulk LZ2 Style Insertion loss (Reference) LZ63 Style Insertion loss (Reference) 25 15 5 M 1 LZ2B824MNB 2 LZ2B5MNB 3 LZ2B155MNB 4 LZ2B5MNB M 1G G 1M M M 1G 1 LZ633MN 2 LZ633MN 3 LZ633MN 4 LZ634MN 5 LZ63B3MN 6 LZ63B4MN 7 LZ63B4MN 8 LZ633MN G Ordering Information Example: LZ2B824MBNBT LZ 2 B 824 M B N T Style Size Rejected Center Center Max. Termination Rated Packaging Bandwidth Frequency Frenquency Insertion Current Tolerance Loss LZ 2 =.5 dec. 8 MHz M = ±% B = db N = Ni =.1 T = Tape 63 Z =.75 dec. C = 15 db Barrier, (m) and Reel B = 1. dec. D = db Solder B =.5 B = Bulk Y = 1.25 dec. Plated (m) C = 1.5 dec. SPECTRUM CONTROL INC. 831 vonia Rd. Fairview, P 16415 Phone: 814-4-27 Fax: 814-4-28 Web site: www.specemc.com 43
LC 63, 85 & 16 LE LM LE Surface Mount EMI Filters L T Circuit Schematic W LC 63 B B LZ 2 & 63.25±.1 LE.25±.1 LC 85 & 16.5±.5 T 1.±.5 L LZ 2 & 63.5±.5 W Mechanical Dimensions Body Body Body End Terminal Middle Terminal Body Length Width Thickness Length Length Style/Size (L) (W) (T) (LE) (LM) LZ2 LZ63 LC63 LC85 LC16.39±.2.±.2.±.2.±.4 (1.±.5) (.5±.5) (.5±.5) (.25±.).63±.8.31±.8.31±.8.12±.8 (1.6±.) (.8±.) (.8±.) (.±.).63±.4.31±.4.24±.4.±.8.16±.8 (1.6±.) (.8±.) (.6±.) (.25±.) (.±.).79±.7.49±.4.31±.8.12±..24±.12 (2.±.18) (1.25±.) (.8±.) (.±.25) (.6±.).126±.8.63±.8.39±.8.16±.12.43±.12 (3.±.) (1.6±.) (1.±.) (.±.) (1.±.) Package Quantities Body Style/Size LZ2 LZ63 LC63 LC85 LC16 Tape and Reel, units/reel 4, units/reel 4, units/reel 4, units/reel 2, units/reel 44 SPECTRUM CONTROL INC. 831 vonia Rd. Fairview, P 16415 Phone: 814-4-27 Fax: 814-4-28 Web site: www.specemc.com
Surface Mount Filter rrays S Series Features The filter s structure minimizes residual inductance with a high self resonant frequency, ensuring large insertion loss in a wide band. The common ground electrode built into the chip ensures complete grounding of all lines at the ground on both ends. The filter is designed to control cross talk. n optimum constant can be selected from the capacity range of -, pf to best suit the frequency. Solder plated nickel barrier terminations offer good solderability and resistance to soldering heat. vailable lead free/rohs Compliant pplications Noise reduction for DC lines on computers Computer peripheral equipment Digital TV & VTR Cellular telephones utomotive electronics Typical Electrical Characteristics Rated Voltage........... 25 VDC to VDC Rated Current............3 mps IR..................., MΩ Min. DC Resistance............3 Ω Max. Temperature Range....... -55 C to +125 C Capacitance Range....... pf to, pf Capacitance Tolerance...±% Specifications Circuit Schematic Insertion Loss GND 7 6 2 2 2.1 1 Dimensions.125 (3.2±.2).62 (1.6±.2).27 (.7±.2).31 (.8±.2).15 (.4±.2).31 (.8±.1) S Series Filter rrays Part Number Rated Voltage Rated Temperature DC Operating Capacitance (@ /6Hz) Current Characteristic IR Resistance Temp (pf) S16C2 S16C C C S16C1 C VDC S16C1.3 DC C, MΩ.3Ω max. -55/+125 C 2 S16U1 S16R2 S16R2 U R R min. 1, 2, S16R3 25 VDC R, SPECTRUM CONTROL INC. 831 vonia Rd. Fairview, P 16415 Phone: 814-4-27 Fax: 814-4-28 Web site: www.specemc.com 45
Surface Mount Filter rrays S Series Ordering Information S 16 C 2 M B N B Style S Series Size 16 Temperature Characteristics C +/- ppm/ C R +/- 15% U -7 +/- 1 ppm/ C Capacitance Capacitance pf pf pf Capacitance tolerance M = ± % Rated Voltage (Vdc) = 25 B = Termination N = Ni Barrier Solder Plated Packaging T - Tape and reel 4, pc/reel B - Bulk pack 1, pcs/bag 2 pf pf 1, pf 2, pf S Tape and Reel Packaging, pf ø.58 (1.5±.1-).157 (4.±.1).78 (2.±.1).157 (4.±.1).68 (1.75±.1).42 (1.1) Max..314 (8.±.3).1 (3.6±.2).137 (3.5±.5) Chip.78 (2.±.2).54 (1.4) Max. S Series Filter rrays Recommended Board Pattern Top side.11 (.3) PO.31 (.8) chip GND.86 (2.2).15 (.4).39 (1.) GND Top side.86 (2.2).15 (.4) GND.11 (.3).39 (1.) PO.31 (.8) chip GND.2 (2.6).2 (2.6) Copper foil pattern.23 (.6) Copper foil pattern.23 (.6) Bottom side Bottom side Ground pattern Ground pattern Through hole Through hole 46 SPECTRUM CONTROL INC. 831 vonia Rd. Fairview, P 16415 Phone: 814-4-27 Fax: 814-4-28 Web site: www.specemc.com