assuredcommunications AN/PRC-117F(C) MULTIBAND MULTIMISSION RADIO APPLICATIONS HANDBOOK

assuredcommunications AN/PRC-117F(C) MULTIBAND MULTIMISSION RADIO APPLICATIONS HANDBOOK

1

AN/PRC-117F(C) Multiband Radio Introduction For missions requiring reliable, interoperable communications, Harris has developed the FALCON II AN/PRC-117F(C), the most advanced multiband, multimode manpack radio in the world period. The AN/PRC-117F(C) integrates the capabilities of several distinct radios into one: VHF-FM for combat net radio; VHF-AM for public safety and ground-toair; UHF-AM for military ground-to-air and UHF TACSAT communications. This radio also utilizes the latest technology to embed many advanced features, such as SINCGARS, HAVEQUICK, as well as Type I encryption. With integrated crypto functions, including black-key management and Crypto Ignition Key (CIK), the AN/PRC-117F(C) is a complete communications package allowing interoperability with all military services in secure and non-secure communications. And being a software defined radio helps make the FALCON II radios future proof. As new technology and waveforms are developed, you can upgrade your FALCON II systems to be compatible with future radios such as the Joint Tactical Radio System (JTRS) radios and they will remain compatible with your radios currently in the field. The AN/PRC-117F(C) manpack can be packaged for vehicular, transit case, or base station applications and we offer a number of accessories and antennas to complete your system. This Applications Handbook defines the AN/PRC-117F(C) radios and their components, and also helps with your selection of antennas and accessories. 2

AN/PRC-117F(C) Multiband Radio AN/PRC-117F(C) black-side Automatic Repeat-Request (ARQ), automatic waveform adaption based on varying channel conditions, and retransmission combining with soft decisions. The AN/PRC-117F(C) is an advanced multiband multimission manpack radio, which provides reliable tactical communications through U.S. Government Type 1 encryption for enhanced secure voice (COMSEC, TRANSEC), high-speed data, ECCM and SATCOM capabilities. The removable keypad/ display unit enables operation on-the-move and acts as a Crypto Ignition Key (CIK) when removed and declassifies a keyed radio. The AN/PRC-117F(C) transceiver provides continuous frequency coverage from 30 to 512 MHz and delivers a selectable power output (10W FM low band VHF/20W PEP AM/FM highband VHF/UHF). Its digital design is fully-programmable for software-based upgrades. A menu-driven interface makes operation easy. One hundred user-defined net presets provide complete radio configuration including radio operating mode, modem setting, COMSEC and TRANSEC keys. Standard features include: TSEC/KY-57 and ANDVT/ MELP/ KYV-5 voice/data, Fascinator voice, and KG-84C data capability; Transmit and Receive SARK; Embedded DAMA and SATCOM modem (MIL-STD-181B, 182- /A, 183- /A); SINCGARS (ESIP) and Havequick I/II ECCM; embedded data modems with both synchronous and asynchronous interfaces; full remote control capability via the RS232/RS422 interface port; multiband scan allowing the user to scan up to 10 presets in any or all of the frequency bands; black retransmission capability (the ability to operate as a retransmission site without decrypting the retransmitted traffic); cross banding (the ability to retransmit from one net to another net in a different frequency band); radio-to-radio preset cloning, a swept frequency distress beacon (available in any channel), CTCSS tone support for LMR (Land Mobile Radio) repeaters, and an external interface for PLGR and NMEA-protocol GPS units. Also standard is the High Performance Waveform (HPW) and the High Speed Modem. The High Performance Waveform securely transfers files between external computers over 5 and 25 khz SATCOM or Line-of-Sight links three to five times faster than previously fielded equipments. The waveform s advanced techniques include: high-speed over-the-air data rates (up to 56 kbps), error free data delivery to COMSEC using The High Speed Modem provides high-speed data over fixed frequency nets at 48 and 64 kbps. This supports applications that require the transmission of large amounts of data. The modem can be used with the embedded digital encryption to provide secure high speed data capabilities. The AN/PRC-117F(C) includes: R/T-1796(P) Manpack Radio Battery Box 10513-4800-07 Manual 10515-0109-4100 Quick Reference Guide 10515-0109-4000 Handset 10075-1399 VHF Blade Antenna 10012-0202 VHF Blade Flexible Adapter A3140084-2 VHF/UHF Flex Antenna 10369-0205 Antenna Bag CW-503/PRC-25 6-foot KDU extension cable 10511-0704-12 Data/Remote Cable 10513-0730-A2 PPP/HPW Cable 10513-0710-A006 HPW Software on CD-ROM 10518-8811-02 Radio Programming Application RF-6550F Optional Features These optional features must be ordered with new AN/PRC-117F(C) radios. For software upgrades to existing radios, please refer to the Software Update section. 10513-8141 Embedded IP The Embedded Internet Protocol (IP) capability of the AN/PRC-117F(C) enables high performance tactical IP networking over UHF tactical satellite communications channels and for Line-of-Sight communications through simple and flexible system configurations. 10513-8142 Wireless Cloning This option provides radio-to-radio preset cloning of all 110 radio nets over-the-air (OTA). No external cables are needed. A unique user-defined TRANSEC key and frequency provides enhanced security by encrypting the data sent over the air. 3

AN/PRC-117F(C)-HQ AN/PRC-117F(C)-HQ Ground-to-Air HAVEQUICK I/II Capable Radio The AN/PRC-117F(C)-HQ is an advanced multiband multimission manpack radio, which provides reliable tactical communications through U.S. Government Type 1 encryption for enhanced secure voice (COMSEC, TRANSEC), high-speed data, ECCM capabilities. The removable keypad/display unit enables operation on the move and acts as a Crypto Ignition Key (CIK) when removed and declassifies a keyed radio. The AN/PRC-117F(C)-HQ transceiver provides continuous frequency coverage from 30 to 512 MHz and delivers a selectable power output (10W FM low band VHF/20W PEP AM/FM highband VHF/UHF). Its digital design is fully-programmable for software-based upgrades. A menu-driven interface makes operation easy. One hundred user-defined net presets provide complete radio configuration including radio operating mode, modem setting, COMSEC and TRANSEC keys. The AN/PRC-117F(C)-HQ includes: R/T-1796(P),HQ Manpack Radio Battery Box 10513-4800-02 Manual 10515-0109-4100 Quick Reference Guide 10515-0109-4000 Handset 10075-1399 VHF Blade Antenna 10012-0202 VHF Blade Flexible Adapter A3140084-2 VHF/UHF Flex Antenna 10369-0205 Antenna Bag CW-503/PRC-25 6-foot KDU extension cable 10511-0704-12 Data/Remote Cable 10513-0730-A2 Radio Programming Application RF-6550F Optional Features These optional features must be ordered with new AN/PRC-117F(C)-HQ radios. For software upgrades to existing radios, please refer to the Software Update section. 10513-8142 Wireless Cloning This option provides radio-to-radio preset cloning of all 110 radio nets over-the-air (OTA). No external cables are needed. A unique user-defined TRANSEC key and frequency provides enhanced security by encrypting the data sent over the air. Standard features include: TSEC/KY-57 voice/data, Fascinator voice, and KG-84C data capability; Transmit and Receive SARK; and Havequick I/II ECCM; embedded 16 kbps modem with both synchronous and asynchronous interfaces; full remote control capability via the RS232/RS422 interface port; multiband scan allowing the user to scan up to 10 presets in any or all of the frequency bands; black retransmission capability (the ability to operate as a retransmission site without decrypting the retransmitted traffic); cross banding (the ability to retransmit from one net to another net in a different frequency band); radio-to radio preset cloning, a swept frequency distress beacon (available in any channel), CTCSS tone support for LMR (Land Mobile Radio) repeaters, and an external interface for PLGR and NMEA-protocol GPS units. 4

Software Upgrade Kits AN/PRC-117F(C) and VRC-103 Software Upgrade Kits Existing customers of the Advanced Multiband Multimission Tactical Radio System can upgrade the features in their fielded radios to the latest capabilities. All features are suitable for either the AN/PRC-117F(C) or the AN/VRC-103. Except as noted, these upgrades are provided as software only and can be performed in any location where the proper tools can be used. The basic upgrade kit consists of a CD ROM that contains the programming application wizard that guides the operator through the process. Using the remote control cable supplied with each radio and a Windows compatible personal computer, a radio can be upgraded in several minutes. Please contact Harris for detailed information regarding programming compatibility and radio configurations. 10513-8121-01 MIL-STD-188-181B Upgrade The MIL-STD-188-181B software only upgrade provides the latest high-speed SATCOM data capability for the AN/PRC-117F(C). All data rates in both 5 khz and 25 khz UHF SATCOM channels are supported. 10513-8122-01 SINCGARS ESIP and Mode 2/3 Fill Upgrade The SINCGARS ESIP upgrade provides additional data capability for the AN/PRC-117F(C) in SINCGARS VHF frequency operation, including full Tactical Internet capability when used in conjunction with an external data device. Complete interoperability with SINCGARS ESIP radios is assured. In addition, enhanced mode 2/3 fill operation for combined COMSEC/TRANSEC fill is supported. This upgrade requires hardware modifications that must be performed at Harris. 10513-8123-01 MIL-STD-188-182A and 183A DAMA Upgrade The MIL-STD-188-182A and -183A software only upgrade provides the latest Demand Assigned Multiple Access SATCOM capability for the AN/PRC-117F(C). All data rates in both 5 khz and 25 khz UHF SATCOM channels are supported. 10513-8124-01 Embedded IP Upgrade The Embedded IP software upgrade can be used with radios that contain ICP software version 1.8 or later. The embedded Internet Protocol (IP) capability of the AN/PRC-117F(C) enables high performance tactical networking over UHF tactical SATCOM channels and for Line-of-Sight communications through simple and flexible system configurations. Embedment of the IP capability into the AN/PRC-117F(C) radio provides unsurpassed performance capitalizing on the existing HPW high-speed waveform technologies in the radio and eliminates the need for external front-end IP devices. Because they both use the same channel access technology, IP networks can share channels with HPW networks. The AN/PRC-117F(C) network parameters can be configured through the radio front panel via remote control or via existing Network Management Systems using the Simple Network Management Protocol (SNMP). 10513-8124-02 Embedded IP with Hardware Upgrade AN/PRC-117F(C) radios that contain ICP software version 1.73 or earlier require a hardware upgrade that must be performed at Harris in order to obtain the Embedded IP software upgrade. The embedded Internet Protocol (IP) capability of the AN/PRC-117F(C) enables high performance tactical networking over UHF tactical SATCOM channels and for Line-of-Sight communications through simple and flexible system configurations. Embedment of the IP capability into the AN/PRC-117F(C) radio provides unsurpassed performance capitalizing on the existing HPW high-speed waveform technologies in the radio and eliminates the need for external front-end IP devices. Because they both use the same channel access technology, IP networks can share channels with HPW networks. The AN/PRC-117F(C) network parameters can be configured through the radio front panel via remote control or via existing Network Management Systems using the Simple Network Management Protocol (SNMP). 5

Vehicular Adapter / Amplifiers VEHICULAR ADAPTER/ AMPLIFIERS AN/VRC-103(V)1 Vehicular Adapter / Power Amplifier AN/VRC-103(V)2 Advanced Multiband Multimission Tactical Radio System Vehicular/Base Station Adapter with the VHF and UHF Collocation Filter Options The AN/VRC-103(V)1 provides a vehicular mounting and power amplification option for the AN/PRC-117F(C). The amplifier provides a 50-watt output in FM mode from 30 to 512 MHz, and 50-watts PEP in AM mode from 90 to 512 MHz. Integrated into the amplifier is a hopping collocation filter for 30 to 90 MHz VHF and a SATCOM collocation filter to provide enhance collocation performance in demanding RF environments. The AN/VRC-103(V)1 operates from a 26 VDC source. The AN/VRC-103(V)1 includes an AN/PRC-117F(C) radio, the AM-7588 power amplifier, a shock mount, operators guide, and cables to connect the radio to the amplifier. In addition, the necessary accessories to allow manpack operation using the AN/PRC-117F(C) as a jerk-and-run configuration are included. Interconnecting cables from the VRC-103(V)1 to the antenna or to the vehicle power system are not included. For connection to a vehicle power supply, use the 10570-0720-01/-02 or the 12013-0716-A025 Vehicle Power Cables. See the Accessories section. The AN/VRC-103(V)1 can be operated from an AC source using the RF-5051PS-125C or a RF-5055PS Power Supply, and a 10570-0716-A006 / -A025 cable. See the Accessories section. AM-7588 50 Watt Power Amplifier The AM-7588 is the power amplifier for the AN/VRC- 103(V)1. Existing owners of the AN/PRC-117F(C) can purchase the AM-7588 to create an AN/VRC-103(V)1. The AM-7588 provides a 50-watt output in FM mode from 30 to 512 MHz, and 50-watts PEP in AM mode from 90 to 512 MHz. Integrated into the amplifier is a hopping collocation filter for 30 to 90 MHz VHF and a SATCOM collocation filter to provide enhance collocation performance in demanding RF environments. The AM-7588 operates from a 26 VDC source, and includes, a shock mount, operators guide and cables to connect the AN/PRC-117F(C) manpack to the amplifier. The AN/VRC-103(V)2 provides a vehicular mounting and power amplification option for the AN/PRC-117F(C). The amplifier provides a 50-watt output in FM mode from 30 to 512 MHz, and 50-watts PEP in AM mode from 90 to 512 MHz. Integrated into the amplifier is a hopping collocation filter for 30 to 90 MHz VHF, a SATCOM collocation filter, and a UHF filter collocation to provide enhance collocation performance in demanding RF environments. The AN/VRC-103(V)2 operates from a 26 VDC source. The AN/VRC-103(V)2 includes an AN/ PRC-117F(C) radio, the AM-7588A power amplifier, a shock mount, operators guide and cables to connect the radio to the amplifier. In addition, the necessary accessories to allow manpack operation using the AN/PRC-117F(C) as a jerk-and-run configuration are included. Interconnecting cables from the VRC-103(V)2 to the antenna or to the vehicle power system are not included. For connection to a vehicle power supply, use the 10570-0720-01/-02 or the 12013-0716-A025 Vehicle Power Cables. See the Accessories section. The AN/VRC-103(V)2 can be operated from an AC source using the RF-5051PS-125C or a RF-5055PS Power Supply, and a 10570-0716-A006 / -A025 cable. See the Accessories section. AM-7588A Power Amplifier The AM-7588A is the power amplifier for the AN/VRC- 103(V)2. Existing owners of the AN/PRC-117F(C) can purchase the AM-7588 to create an AN/VRC-103(V)2. The AM-7588 provides a 50-watt output in FM mode from 30 to 512 MHz, and 50-watts PEP in AM mode from 90 to 512 MHz. Integrated into the amplifier is a hopping collocation filter for 30 to 90 MHz VHF and a SATCOM collocation filter to provide enhance collocation performance in demanding RF environments. The AM-7588A operates from a 26 VDC source, and includes, a shock mount, operators guide, and cables to connect the AN/PRC-117F(C) manpack to the amplifier. 6

Vehicular Adapter / Amplifiers Amplifier Accessories 12005-7100-01 External Fan Kit The External Fan Kit extends the transmission time of the amplifiers when operating at high ambient temperatures. The kit mounts to the rear heat sink assembly, and is automatically controlled to turn on and cool the amplifier when a preset internal temperature is reached. The kit includes fans, mounting brackets, and a power cable that connects to the rear of the amplifier. The kit is compatible with the AN/VRC-103(V)1, AN/VRC-103(V)2, AM-7588, and the AM-7588A. 12005-1200 Locking Kit The Locking Kit provides a method to secure either the AN/VRC-103(V)1 or AN/VRC-103(V)2 with a user-supplied lock. 7

8 System Interconnect AN/VRC-103 System Interconnect Diagram AN/VRC-103(V) System AN/VRC-103 (Front) J4 Coax J7 To Antenna (RF-390-ATXXX) Coax To Satellite Antenna To +28VDC 10570-0720-01 Vehicle DC Power Cable AN/VRC-103 (Rear)

Antennas BASE STATION ANTENNAS RF-9070 VHF / UHF Base Station Antenna - 100 to 420 MHz 10512-0240-01 VHF Whip Antenna - 30 to 108 MHz An 8.7-foot whip antenna built of collapsible sections, with a spring base adapter. Provides better performance than the 10512-0201-01 VHF blade antenna. An omnidirectional, biconical base station antenna. Power handling capability is 400 watts. The antenna comes with a 10-foot coaxial cable with a Type N female on the radio end. Mounting is by a 1.3-inch threaded hole for the RF-9071 mast. See RF-9071 Mounting Mast. NOTE: This antenna does not cover 30 to 80 MHz. See the RF-9072-AT001 below. RF-9071 Mounting Mast for the RF-9071 Mounting Mast for RF-9070 Antenna. It provides a 6.5-foot length of 1.3-inch diameter mast complete with mounting clamps. The mast is threaded at one end for use with the RF-9070 antenna. 10369-0205 VHF/ UHF Antenna - 90 to 512 MHz This is a 13-inch dual-band antenna with a swivel base for VHF High Band and UHF. One is supplied with each AN/PRC-117F(C) radio. TACTICAL ANTENNAS RF-289B-AT001 Tactical VHF Low-Band Antenna, 30 to 108 MHz RF-9072-AT001 VHF Low Band Base Station Antenna - 30 to 108 MHz An omnidirectional, discone base station antenna. Power handling capability is 100 watts. The antenna has a Type N female connector, and is supplied with a mounting arm that attaches to any vertical mast or tower. MANPACK ANTENNAS 10512-0201-01 VHF Blade Antenna Kit - 30 to 108 MHz The RF-289B is a tactical, log-periodic antenna system for use from 30 to 108 MHz. The forward gain-overaverage soil condition is 7.0 dbi with a front-to-back ratio of 15 db. This antenna may be configured in vertical or horizontal polarization. The antenna system comes packaged in two canvas bags containing the antenna, a sectional 20-foot mast, 50 feet of coax cable, ground stakes, a mounting base, guy ropes, and a hammer. The antenna has a BNC connector. The kit includes the 10012-0202 48-inch flexible blade antenna with an adjustable gooseneck base. One is supplied with each AN/PRC-117F(C) radio. RF-290 Tactical VHF Low-Band Omnidirectional Antenna, 30 to 88 MHz The RF-290 is an easily erected, transportable Bicone antenna designed for use from 30 to 88 MHz, though it 9

Antennas is usable up to 108 MHz. The system comes packaged in a canvas bag containing the antenna, a 3-foot mast, an 80-foot coax cable with BNC connectors, ground stakes, a mounting base, guy assemblies, and a hammer. 12006-9000-01 High-Gain, Foldable SATCOM Antenna RF-291-AT001 Tactical VHF High / UHF Omnidirectional Antenna, 100 to 512 MHz The RF-291 is an omni-directional transportable discone antenna designed for use from 100 to 512 MHz, though it is usable up to 1,000 MHz. The 12-lb antenna is easily deployed on the sectional 8.5-m mast. Antenna, mast, guy-lines, a 15-m coax cable with BNC connectors, and ground stakes all stow in a canvas bag for transportability. The antenna is deployable in less than 15 minutes. SATCOM ANTENNAS This SATCOM antenna is a high gain, crossed yagi antenna for applications that require more gain in a tactical package. This antenna provides +9.0 to 15 dbic gain with right hand polarization. The antenna weighs 35 lbs. and can be broken down and transported in the carrying bag provided. 12006-9001-01 X-WING SATCOM Antenna Bolt Mount RF-3080-AT001 SATCOM Antenna, 240 to 400 MHz The X-WING SATCOM antenna allows bolt on for permanent installation onto vehicles, shelters and other metal objects. The rugged design allows the antenna to be used for SATCOM-On-The-Move (SOTM) operations. 12006-9002-01 X-WING SATCOM Antenna Magnet Mount The antenna is a rapid deploy, high gain, crossed yagi antenna for SATCOM communications. It folds down to a compact 18.5 x 6 x 6 inch package and is 40 x 24 x 24 inches when deployed. This antenna provides +7.0 to 11 dbic gain with right hand polarization. The 3 db beamwidth is 85 in. The RF-3080-AT001 includes the crossed dipole driven elements, a set of reflectors, two director extension kits, tripod, a coaxial cable with BNC connectors, carrying case, and instructions. Deployment time is less than one minute. The X-WING SATCOM antenna has magnetic mounts allowing temporary installations onto vehicles, shelters, and other metal objects. The rugged design and magnet mounts are strong enough to allow the antenna to be used for SATCOM-On-The-Move (SOTM) operations. 10

Antennas 12006-1010-01 Tripod Mount for RF-390-AT00x Antenna RF-390-AT00x VHF/UHF Vehicular Whip Antenna 30 to 512 MHz End Fed This tripod mount allows the use of the RF-390-AT00x Vehicular Whip in a tactical application. The mount consists of three legs and a center base for attaching the RF-390 antenna. The three legs also act as a ground plane for the antenna. The tripod stands at approximately 7 feet and can be broken down and transported in the carry bag provided. The RF-390 Antenna is not included. VEHICLE ANTENNAS RF-387-AT001 VHF Low-Band Whip Antenna 30 to 108 MHz Center Fed The RF-387-AT001 is a vehicular center-fed whip antenna with a flexible spring feed-through mounting base. 100 Watts. This antenna does not need a good ground plane. Length is 120-inches nominal whip height, 131-inches including mounting base. The antenna mounts directly to an RF-292 Mounting Base, which should be ordered separately. Color: RF connector is a BNC female connector on underside of the base. The RF-390-AT00x multiband vehicular whip antenna is an end-fed vertical whip for use from 30 to 512 MHz. The exceptional bandwidth is obtained from distributive passive components along the antenna s length. Antenna length is 110 inches. The RF-390-AT001 has equivalent gain to other narrowband antennas. This antenna is the ideal choice for multiband radios because it reduces the vertical signature by replacing three antennas with a single antenna. The antenna comes with single or dual port to be compatible with both its AN/PRC-117F(C) and the vehicular adapters. The feed-through spring base mounts directly to the RF-292 Universal Antenna Mount, which should be ordered separately. The RF-390-AT00x antenna is available in different colors and different connectors: RF-390-AT001 RF-390-AT002 RF-390-AT003 RF-390-AT004 RF-390-AT005 RF-390-AT006 Dual BNC port CARC Green 383 Dual BNC port CARC Tan Single Type N port CARC Green 383 Single Type N port CARC Tan Single BNC port CARC Green 383 Single BNC port CARC Tan RF-394 VHF High-Band Vertical Antenna, 116 to 174 MHz Center Fed The RF-394 is a military-grade, center-fed, broadband dipole antenna covering the 116- to 174- MHz frequency range (70 watts max). This 42-inch (1.1-m) antenna installs on the standard mounting brackets found on most military vehicles or ships or the RF-292 Universal Antenna Mount, which should be ordered separately. The unit includes the antenna and its mounting hardware. RF connector is BNC female. 11

Antennas RF-397 UHF Vertical Antenna, 225 to 420 MHz Center Fed The RF-397 is a military-grade, center-fed, broadband dipole antenna covering the 225- to 420- MHz frequency range (60 watts). This 33.5-inch (0.9-m) antenna and spring mount installs on the standard mounting brackets found on most military vehicles or ships or the RF-292 Universal Antenna Mount, which should be ordered separately. The unit includes the antenna and mounting hardware. RF connector is type N female. spring, and includes the antenna sections, a base, tie down kit, and mounting hardware. The antenna mounts directly to an RF-292 Universal Antenna Mount for vehicular mounting or the RF-1584 Antenna Mast Mount for mast mounting. The RF-292 and RF-1584 mounts are ordered separately. RF connector is BNC female. ANTENNA ACCESSORIES RF-292 Universal Antenna Mount RF-398-01 VHF Low-Band Vertical Antenna, 30 to 90 MHz End Fed The RF-292 is used to mount antennas to a vehicle, shelter, etc. Mounting hardware is included. Color: Olive Drab. Order the RF-292-01 for CARC Green 383, RF-292(S) for CARC Forest Green, RF-292(S)1 for CARC Tan. The RF-398-01 is a vertically polarized, end-fed monopole antenna useable from 30 to 90 MHz (70 watts max). The low profile, EMP protected, vehicular antenna is designed for installation where short antenna length (75 inches) or low detect-ability is desired. The feed-through spring mounts directly to an RF-292 Universal Antenna Mount, which should be ordered separately. A tie down is included. RF connector is BNC female. RF-398-03 VHF Low-Band Vertical Antenna, 30 to 108 MHz Center Fed RF-1584 Mounting Mast for Vehicular Antennas A rugged, aluminum bracket for 1- to 2-inch diameter masts. Designed for mast-mounting antennas such as the RF-387, RF-394, the RF-397, or the RF-398-02. Includes a mount and mast mounting hardware. 10564-3070-01 Diplexer Assembly The RF-398-03 is a center-fed dipole, vertically polarized whip antenna useable from 30 to 108 MHz (100 watts maximum). The EMP protected, broadband antenna is designed for permanent mounting on vehicles, shelters, towers, etc. The RF-398-03 does not require a good ground plane for optimum performance. Therefore, it is ideal for tower or rooftop installations where good ground plane is not available. The unit consists of two fiberglass-radiating sections and a mount with a flexible The 10564-3070-01 Diplexer Assembly combines the two antenna ports on the AN/PRC-117F(C) manpack into a single antenna port that covers the entire 30 to 512 MHz frequency range. The antenna connection to the Diplexer is a BNC connector. The assembly is attached to the AN/PRC-117F(C) by using the threads on one of the antenna connectors. Two short coax cables are included to connect the Diplexer Assembly to the AN/PRC-117F(C). 12

Cables DATA AND REMOTE CABLES 10511-0707-A006 Generic Audio / Data Cable, Pigtail Termination A generic Audio/Data Cable that is unterminated on the opposite end. Length is 6 feet. 15013-0710-A006 High Performance Waveform (HPW) Cable J3 This cable is an asynchronous, PPP cable for use with the HPW and IP functions on the AN/PRC-117F(C). It connects to the front panel J3 Data and a COM port on a computer using a 9 pin D style connector. Length is 6 feet. 10535-0780-A006 Synchronous / Asynchronous Data Cable J3 This cable provides a synchronous or asynchronous RS-232 data interface to the radio. It can be used with HUITS over an AN/PRC-117F(C). The data terminal connection end utilizes a 25-pin (DB-25) connector. Length is 6 feet. 10513-0730-A1 / -A2 Data / Remote Control Cable J3 This cable provides both a synchronous/asynchronous data interface and RS-232 remote control interface. This is a Y-cable that connects to the front panel Data connector, J3. This cable can be used with the RF-6550F Radio Programming Application. Length of the 10513-0730-A1 is 6 feet, and the 10513-0730-A2 is 10 feet. One 10513-0730-A2 is supplied with each AN/PRC-117F(C) manpack. 10513-0740-A006 Remote Control and Programming Cable J6 This cable provides both RS-232 remote control and programming interface to the radio via the front panel Accessory connector, J6. This cable can be used with the RF-6550F Radio Programming Application. Length is 6 ft. 10513-0750-A006 Remote Control and Programming Cable J3 This cable provides both RS-232 remote control and programming interface to the radio via the front panel Data connector, J3. This cable can be used with the RF-6550F Radio Programming Application. Length is 6 ft. 10535-0760-A006 Remote Control and Programming Cable J9 This cable provides both RS-232 remote control and programming interface to the radio via the rear panel connector, J9. This cable can be used with the RF-6550F Radio Programming Application. Length is 6 ft. 10518-1694-A006 Data / Remote Control Y Cable for use with RF-5800R-RC200 This cable provides both an synchronous/asynchronous data interface and RS-232 remote control interface to the RF-5800R when used with the AN/PRC-117F(C). This is a Y cable that connects to the front panel J3 connector. The opposite end utilizes a 25-pin D style connector for data and a 9-pin D style connector for remote control. Length is 6 feet. NOTE: This cable can only be used on the RF-5800R Remote Control. It will not work connected directly to the AN/PRC-117F(C) manpack. A 10518-1694-A006 cable comes with each RF-5800R-RC200 CLONING CABLES 10513-0700-A006 Clone Cable - J9 Cable for cloning of one radio s programming (preset, nets, etc.) to another radio using the J9 rear panel connector. Length is 6 feet. 12013-0720-A006 Clone Cable - J6 Cable for cloning of one radio s programming (preset, nets, etc.) to another radio using the J6 (Blue Dot) front panel connector. Length is 6 feet. RETRANS CABLES 12005-0717-A012 Retransmission Cable Interconnects two AN/PRC-117F(C) radio units via J3 Data Connector to provide retransmission capability with 12 feet separation. 10511-0717-01 Retransmission Cable Interconnects two AN/PRC-117F(C) radio units via J3 Data Connector to provide retransmission capability with 50 feet separation. 13

Cables VEHICLE POWER CABLES 10570-0720-01 / -02 AN/VRC-103(V)1 to Vehicle DC Power Cable Kit This cable connects an AN/VRC-103(V)1 Vehicular Adapter or AM-7588 Amplifier to a 28 VDC power source or 28 VDC vehicle supply. Includes fuses, fuse holder, and split bolts to connect to existing power cables from vehicle battery. Length of the 10570-0720-01 is 21 feet and the 10570-0720-02 is 35 feet. 12013-0716-A025 AN/VRC-103(V)1 to Vehicle DC Power Cable This cable connects an AN/VRC-103(V)1 Vehicular Adapter or AM-7588 Amplifier to a 28VDC power source or 28 VDC vehicle supply. The cable has preinstalled fuse holder and lugs. Length is 25 feet. POWER SUPPLY CABLES 10570-0716-A006 / -A025 AN/VRC-103(V)1 to Power Supply Cable This cable connects an AN/ VRC-103(V1) Vehicular Adapter or AM-7588 Amplifier to a RF-5051PS-125C Power Supply, RF-5055PS AC/DC Supply or the RF-5052PS 12/24 VDC Converter. Length of the 10570-0716-A006 is 6 feet and the 10570-0716-A025 is 25 feet. 10570-0717-A003 / -A006 / -A025 AN/VRC-103(V)1 to RF-5056PS Cable This cable connects an AN/VRC-103(V1) Vehicular Adapter or AM-7588 Amplifier to a RF-5056PS 12/24 DC/DC Converter. Length of the 10570-0717-A003 is 3 feet, the 10570-0717-A006 is 6 feet and the 10570-0717-A025 is 25 feet. 10373-0030 DC Power Cable - RF-5056PS This cable connects the RF-5056PS DC/DC Converter to the vehicle DC power source. Opposite end is unterminated. Length is 15 feet. PLGR and GPS CABLES 12005-0730-A006 PLGR Interface Cable Interface cable to connect a PLGR to the radio via the front panel J2 Connector. Length is 6 feet. 12005-0740-A009 NEMA Interface Cable Interface cable to connect a NEMA compatible GPS receiver to the radio via the front panel J2 connector. GPS end is a 9 pin D style male connector. Length is 9 feet. KDU EXTENSION CABLES 10511-0704-012 KDU Extension Cable 6 feet 10511-0704-150 KDU Extension Cable 75 feet This cable allows the user to operate the KDU when removed from the front panel of the radio. 10181-9831-009 AC Power Cable - RF-5051PS-125C This cable connects the RF-5051PS-125C to a standard U.S. style AC outlet. Length is 9 feet. 12027-0205-A020 DC Power Cable - RF-5851-AD001 The cable connects the RF-5851-AD001 to DC power. Length is 20 feet HANDSET EXTENSION CABLES 11042-0104-A0xx Handset Extension Cable This cable extends the distance of the attached cord on the handset. Specify length in feet (xx = length). Available lengths are 12 foot ( A012), 15 foot (-A015) or 33 feet (- A033). 14

Cables COAX CABLES 10513-0810 Low Loss Coax Cable - N to N Connector This low loss coax cable is for applications that require long runs over 100 feet. Coax is LMR 400 cable. Specify length when ordering. Not recommended for lengths greater that 300 feet. 10513-0811 Low Loss Coax Cable - N to BNC Connector This low loss coax cable is for applications that require long runs over 100 feet. Coax is LMR 400 cable. Specify length when ordering. Not recommended for lengths greater that 300 feet. 10513-0812 Low Loss Coax Cable - BNC to BNC Connector This low loss coax cable is for applications that require long runs over 100 feet. Coax is LMR 400 cable. Specify length when ordering. Not recommended for lengths greater that 300 feet. 10369-7212-xxx Coax Cable - RG-213 BNC to BNC Connector This RG-213 style coax cable has male BNC type connectors on each end. Specify length xxx in feet; i.e., -025 would be 25 feet. Maximum length is 250 feet, but not recommended for lengths greater than 100 feet, especially in the UHF range. W-1887 7/8 inch, Semi-Rigid, Foam Dielectric Coax Cable This low-loss coaxial cable is used for long runs greater than 250 feet. It requires special connectors, J95-0004-000 connectors, ordered separately. J95-0004-000 Type N Male Connector for W-1887 These are male type N connectors for use with the W-1887 coax cable. MATING CONNECTORS J69-0016-001 Mating connector for the J3 DATA connector on the AN/PRC-117F(C) (see J09-0039-001 for backshell). J69-0016-002 Mating connector for the J6 ACCESSORY connector on the AN/PRC-117F(C) (see J09-0039-001 for backshell). J09-0039-001 Backshell for the J69-0016-001 and J69-0016-002 connectors. J69-0001-623 Mating connector for J1 AUDIO/DATA/FILL connector on the AN/PRC-117F(C). UG-88C/U Male BNC mating connector for J5 VHF LOW and J8 VHF HI / UHF connectors on the AN/ PRC-117F(C), and for J4 through J7 antenna connectors on the AN/VRC-103 or AM-7588. This connector can be used with RG-58 or RG-223 coax. J29-0007-107 Mating connector for the KDU connector on the AN/PRC-117F(C). This also mates with the connector on the KDU itself. J29-0014-017 Mating connector for the J2 GPS connector on the AN/PRC-117F(C). J22-0126-026 Mating connector for the J9 ACCESSORY connector on the rear panel of the AN/PRC-117F(C). (see J55-0155-515 for the backshell). J55-0155-515 Backshell for the J22-0126-026 connector. M39012/20-0101 Right angle male BNC connectors used to interconnect the AN/PRC-117F(C) J5 and J8 antenna connectors to the J2 VHF and J3 UHF input connectors on the AN/VRC-103 or AM-7588. This connector can be used with RG-58 or RG-223 coax. M55181/1-03 Mating connector for the J1 DC POWER connector on the AN/VRC-103 or AM-7588. 15

Accessories BATTERIES RF-5058-CH006 6-Bay Battery Charger/Conditioner 10075-1345-01 (BB-590/U) Rechargeable Nickel-Cadmium Battery The 10075-1345-01 (BB-590/U) is a rechargeable nickelcadmium battery that works well up to 50 C. BB-390A/U Rechargeable Nickel Metal-Hydride Battery The BB-390A/U is a rechargeable, nickel-metal hydride battery that provides about 60% more capacity than a BB-590/U. Not recommended for use above 60 C. BA-5590/U Non-Rechargeable, Disposable Lithium Battery The BB-5590/U provides approximately three times the operation life of the BB-590/U Rechargeable Nickel- Cadmium Battery. The BA-5590/U cannot be recharged, and is recommended for use in high temperature applications when temperatures exceed 55 C. BB-2590/U Type Rechargeable Lithium-Ion Battery The BB-2590-type battery is a very high capacity, rechargeable, Lithium-Ion battery that provides up to 300% the energy density and 250% of the capacity of the BB-590/U. It is the same physical size, but is about 20% lighter than the BB-390 and BB-590 Batteries. The battery has a built-in battery life indicator. Use with the RF-5058-CH002 or RF-5058-CH006 Battery Chargers. The RF-5058-CH00X Battery Charger/Conditioner family includes 2-bay and 6-bay versions that will charge and condition BB-590/U NiCd, BB-390/U NiMH, and BB-2590/U Type Li-Ion batteries. The charger units are identical except for physical size and weight and the number of batteries that can be simultaneously handled. A mixed combination of up to two (CH002 unit) or six batteries (CH006 unit) of these types can be simultaneously charged and/or conditioned. Indicators are provided to display the charge or conditioning status of each battery to the operator. The charging and conditioning cycles are automatic and will shut off when charging is completed or under faulty battery conditions. Typical charging times for fully discharged batteries vary with battery capacity, temperature, and battery age, but are typically 2.5 hours for BB-590, 4 hours for BB-390, and 6 hours for BB-2590 type batteries. The Charger/Conditioner is packaged in a waterproof case for transport and operation. The system operates on 95-260 VACS, 47 to 440 Hz, or 12 to 36 VDC autoranging. An instruction manual and a detachable DC power cable with alligator clips are included. Also includes a detachable AC cable with U.S. NEMA 5-15P male on one end and IEC 60320 female on the other. RF-5059-CH002 NiMH/NiCd Battery Charger/Discharger BATTERY CHARGERS RF-5058-CH002 2-Bay Battery Charger/Conditioner The RF-5059-CH002 is a quick-charger system for 10075-1345-01 (BB-590/U) and BB-390A/U batteries. It is powered by AC (95-265V) or DC (10-36V) power. AC and DC Input Cables should be ordered separately: 10488-1386-01 AC cable, U.S. (8 ft) 10488-1387-01 AC cable, Continental Europe (2.5 m) 10488-1388-A008 AC cable, UK (8 ft) 10488-1385-A005 DC cable, Alligator clip to charger (5 ft) 16

Accessories POWER SUPPLIES RF-5052PS 12/24 VDC Converter RF-5051PS-125C Power Supply The RF-5051PS-125C provides power for the AN/VRC-103(V)1 or AM-7588 Amplifier in a base station, shipboard, or transportable operation. DC output is 28-VDC nominal at 30 amps. Input is 15 or 230 VAC, 47 to 400 Hz. Requires 10181-9831-009 AC Power Cable (included). RF-5055PS AC/DC Power Supply The converter provides 26.5-volts DC at 17 continuous amps and 20-amps peak from a 12-volt DC source. It permits the operation of the AN/VRC-103(V)1 or AM-7588 Amplifier in vehicles with 12-volt electrical systems. It is designed for mounting in engine compartments or other harsh environments. The converter includes a 15-foot DC input fused cable. BATTERY ELIMINATOR/ DC POWER ADAPTER RF-5850-PS001 Battery Eliminator The RF-5055PS provides power for the AN/VRC-103(V)1 or AM-7588 Amplifier in a low-profile package. The power supply accepts 115 or 230 VAC and supplies 26.4 VDC at 18 amps. When used with the RF-5056PS DC/DC Converter, the RF-5055PS will supply power to the auxiliary power input of the RF-5056PS to conserve vehicular battery life when AC power is available. A 9-foot AC power cable is included. RF-5056PS DC/DC Converter The Battery Eliminator is used in place of the battery box to provide operation of the AN/PRC-117F(C) from 85 to 270 VAC, 47 to 440 Hz, or 9 to 36 VDC. The power supply contains a battery to permit radio operation for short time periods without external prime power. The battery is recharged when external prime power is reapplied. The unit is supplied with both a DC power cable and an AC power cable with a U.S. style plug attached. It can be used with the RF-5870-VM001 Shock Mount in vehicle applications. RF-5850-PS002 Battery Eliminator The RF-5056 DC/DC converter provides a regulated 26.5 VDC at 20 amps peak when supplied with a 12 VDC, 24 VDC or 28 VDC from a vehicle DC power system. In 150-watt systems the duty cycle is restricted to 20%. This DC/DC Converter will also accept an auxiliary power input from a RF-5055PS AC/DC Power Supply - when power is present at the auxiliary input, the RF-5056 converter shuts down to conserve the vehicle s battery life. The low profile design allows mounting under the RF-5055PS sharing the same shock tray. The RF-5056 will also mount on the RF-5071VSM-03 Shock Mount for use in severe shock applications. No cables or mating connectors are provided. Use the 10373-0030 DC Power Cable for connection to the vehicle DC Power (order separately). The RF-5850-PS002 Battery Eliminator is used in place of the battery box to provide operation of the RF-5800R Remote Control from 85-270 VA, 47 to 440 Hz, or 9 to 36 VDC. The unit is supplied with both a DC power cable and an AC power cable with US style plug attached. 17

Accessories RF-5851-AD001 DC Power Adapter RF-5800R-RC200 Remote Control System The DC Power Adapter is used in place of the battery box to provide operation of the AN/PRC-117F(C) from 22- to 32-VDC. The adapter provides protection from overvoltage, undervoltage ripple, etc. and is designed to meet MIL-STD-1275. The 12027-0205-A020 (20 foot) DC Power Cable should be ordered separately. It can be used with the RF-5870-VM001 Shock Mount in vehicle applications. REMOTE CONTROL RF-5800R-RC100 Remote Control System The RF-5800R-RC200 provides remote control of the AN/PRC-1117(C) up to a distance of 3.5-kM over standard field wire. Full remote control of transmit and receive Audio, Data, and Control (using a keypad display unit) of the manpack is possible from the remote site. All the functions controlled by the KDU are available from the Remote Control. The system supports the full range of data applications for the AN/PRC-117F(C) including HPW, RF-6550F Radio Programming Application, and RF-6710W Wireless Messaging Terminal. It includes a Remote Control Unit RF-5800R-RC003 (RCU), A Local Control Unit RF-5800RRC002 (LCU), handset, manual, and carrying bag. The RCU is powered by a single BA-5590, BB-390, or BB- 590 battery. The RF-5800R-RC100 includes a 10518-1694-A006 cable for data applications. See the RF-5800R-RC100 above if HPW functionality is not required. The RF-5800R-RC100 provides remote control of the AN/PRC-117F(C) up to a distance of 3.5-kM over standard field wire. Full remote control of transmit and receive Audio, Data, and Control (using a keypad display unit) of the manpack is possible from the remote site. All the functions controlled by the KDU are available from the Remote Control. The system supports the full range of data applications for the AN/PRC-117F(C) including, RF-6550F Radio Programming Application, and RF-6710W Wireless Messaging Terminal, with the exception of HPW. The RF-5800R- RC100 does not support the HPW function of the AN/PRC-117F(C). It includes a Remote Control Unit RF-5800R-RC003 (RCU), a Local Control Unit RF-5800R-RC002 (LCU), handset, manual, and carrying bag. The RCU is powered by a single BA-5590, BB-390, or BB- 590 battery. The RF-5800R-RC100 requires a 10518-1694-A006 cable for data applications. See the RF-5800R-RC200 below if HPW functionality is required. 12027-0050-075 Short Distance Remoting Kit The short distance remoting kit allows remote audio and control of the AN/PRC-117F(C) up to a distance of 75 feet. The 10181-5180-01 Amplified Speaker is used for audio and handset remoting. The kit includes three cables: a 10535-0707-075 for audio, a 10535-0706-075 for speaker power, and a 10511-0704-150 KDU extension cable. The speaker requires an external 26 VDC power source. 18

Accessories AMPLIFIED SPEAKERS BACKPACKS 10181-5180-01 Tactical Amplifier Speaker 10512-0465-01 FALCON II Backpack Carrying Bag Amplifies the audio output for vehicular applications. The speaker features dual 6-pin handset/headset connectors, individual handset/headset and speaker volume controls, individual handset/headset and speaker power switches, and a vehicular mounting bolt. It requires external 26-VDC power. Two cables are required (ordered separately). 1. Speaker power cables: 10535-0706-A009 10535-0706-A075 10535-0708-A009 10535-0708-A075 11068-0018-A009 2. Audio cable: 10535-0707-A009 9-foot long speaker to 4 pin power connector 75-foot long speaker to 4-pin power connector 9-foot long speaker to pigtail leads 75-foot long speaker to pigtail leads 9-foot long speaker to RF-5850-PS001 Battery Eliminator audio cable that connects to the PRC-117F(C) audio connector J1. Designed for short duration, dismounted missions. This Olive Drab colored bag has pouches for accessories, antennas, and two additional batteries. The bag has holes in the top for deployment of the antennas, the Keyboard/Display Unit Extension Cable, the handset cable, and other accessory cables while the bag is closed. 10530-0460-01 Backpack Carrying Bag This Olive Drab colored bag is heavily padded and designed for use in airborne jump applications. It has HERCULON reinforced areas, and has adjustable web to set the carrying depth of the radio. It has room to store cables and two spare batteries. It is designed to fit inside a larger ALICE rucksack. HANDSETS 10075-1399 Lightweight Handset - H-250/U (modified) 10570-3500-22 Tactical Amplifier Speaker This speaker connects to the J3 Data Connector on the AN/PRC-117F(C). It is powered off the radio s battery. It can be used with the AN/VRC-103(V)1 or AM-7588 amplifiers. Speaker must be disconnected if the data connector is required for other use. The 10075-1399 is a high-grade, lightweight MIL handset for use with the FALCON II tactical radio systems. One handset is supplied with each radio. 19

Accessories HEADSETS SOFTWARE APPLICATIONS RF-3020-HS001/HS002 Lightweight Headsets HPW see SOFTWARE UPGRADES RF-6550F Radio Programming Application (RPA) The RF-3020-HS001 headset is a lightweight tactical headset with a single earphone, a gooseneck boom mounted microphone, and a push-to-talk switch with a clothing clip for attachment. The RF-3020-HS002 (shown) is identical to the RF-3020-HS001, but has a second, silent push-to-talk button in sniper switch fashion. The headsets are rugged, submersible, and designed to meet tactical environmental requirements. HUB BATTERY This software application allows the user to enter frequency, mode, ALE network information and other parameters into a Windows-based computer program and save it to a file. The program also downloads the operating parameter into a radio using a 10535-0775-A006 Asynchronous Data (PPP) cable. The computer file can program all the radios in a network. The RF-6550H RPA and 10535-0075-A006 cables are provided with each AN/PRC-117F(C) manpack. RF-6710W Wireless Message Terminal Software B41-0010-003 Hold Up Battery (HUB) Replacement Hold Up Battery for the AN/PRC-117F(C) radio. NSN 6135-01-461-5322 KDU WRIST STRAP 10512-0470-01 KDU Wrist Strap Assembly When installed on a Harris- or customer-provided computer, the RF-6710W Wireless Message Terminal (WMT) forms a multi-media messaging system that provides transparent relay of e-mail and files over VHF or UHF, operating like a standard PC with email. The RF-6710W automatically sends messages and data to the final destination. RF-6705 Tactical IP Chat This assembly provides a method to mount the removable Keypad/Display Unit (KDU) from the radio to the left or right forearm using adjustable Velcro fasteners for size adjustment. This software application allows the user to exchange text messages and files among field and networked data terminals. It uses either ARQ or broadcast data transfer among members of an IP subnetwork. The software runs on PCs and Pocket PC-based PDAs. Requires IP option in AN/PRC-117F(C) Manpack. 20

Accessories SHOCK MOUNTS RF-5870-VM001 Adjustable Shock Mount This shock mount allows installation of the AN/PRC-117F(C) Manpack into vehicular, shelter, or other applications that require shock isolation. The mount adjusts to allow the battery box, the RF-5850-PS001, or the RF-5851-AD001 to be used with the manpack. RF-5870-VM002 Security Lock MOUNTS 10564-6045-02 Rack Mount Kit This Rack Mount Kit allows installation of the AN/PRC-117F(C) radio into a standard 19-inch wide x 24-inch deep rack. The kit consists of a metal shelf and hardware for installation into the rack. It also includes a RF-5870-VM001 Shock Mount to mount the AN/PRC-117F(C) manpack on the metal shelf. When installed the shelf and radio are stationary and do not extend on rack slides. 11071-0900-04 KDU Gimbaled Mount This kit attaches to the RF-5870-VM001 to prevent unauthorized removal of the radio from the shock mount. The kit requires the use of a padlock, which is not included. RF-5071VSM-03 Shock Mount This shock mount allows installation of the RF-5051PS-125C Power Supply into vehicular, shelter or other applications that require shock isolation. 12005-1920-01 Shock Mount for AN/VRC-103 / AM-7588 The 11071-0900-04 KDU Gimbaled Mount is used for remote mounting of the Keypad Display Unit (KDU) from the AN/PRC-117F(C). The mount can be used in vehicles or on a desktop. The KDU is easily unlatched from the radio and latched to the Gimbaled Mount for installation. It is just as easily reattached to the radio for jerk-and-run operation. The Gimbaled Mount can be used with the 10511-0704-012 6-foot KDU Extension Cable. Three 10-32 x 0.75 inch hex mounting bolts with washers and locking nuts, and five black cable ties are included to facilitate installation. KDU and cables are not included. This shock mount allows installation of the AN/VRC-103 Vehicular Adapter or AM-7588 Power Amplifier into vehicular, shelter, or other applications that require shock isolation. Note: this mount is supplied with each AN/VRC-103 or AM-7588. 21

Accessories 10564-2400-01 Manpack Transit Case with Remote Speaker/KDU Mount 10564-2400-02 Manpack Transit Case This transit case provides an easily transportable, water tight case for the AN/PRC-117F(C) manpack and its accessories. It includes a RF-5870-VM001 shock tray for mounting the manpack and the standard battery box. The tray also accommodates the RF-5851-AD001 DC Filter or the RF-5850-PS001 Battery Eliminator, which are purchased separately. An accessory bag is attached to the back cover to hold the antennas, cables, and handset. The AN/PRC-117F(C) is not included and must be purchased separately. A removable mount holds the 10181-5180-01 speaker, the KDU, and a handset bracket allowing the radio to be operated remotely from a distance up to 9 feet away. The 10181-5180-01 speaker is not included and must be purchased separately. Three cables are required, which must be purchased separately: This transit case provides an easily transportable, water tight case for the AN/PRC-117F(C) manpack and its accessories. It includes a RF-5870-VM001 shock tray for mounting the manpack and the standard battery box. The tray also accommodates the RF-5851-AD001 DC Filter or the RF-5850-PS001 Battery Eliminator, which are purchased separately. An accessory bag is attached to the back cover to hold the antennas, cables, and handset. The AN/PRC-117F(C) is not included and must be purchased separately. 1. 10535-0707-A009 9-foot audio 2. 10511-0704-020 10-foot KDU extension cable 3. 11068-0018-A009 9-foot DC power cable if using the RF-5850-PS001 or 10535-0708-A009 9-foot long DC power cable with unterminated leads 22