fold away petite Assembly Instructions
fold away Thank you for purchasing a Fold Away etite cabinet. If you have any questions regarding assembly please contact us on 0800 048 8606. petite CASTER (C2) x 14 CAM BOLT (CB1) x 76 SHELF EG (S1) x 124 BRACKET (AB1) x 12 MAG CATCH (MC1) x 2 SCREW (35-17D) x 104 SCREW (3-15C) x 30 CAM LOCK (CL1) x 76 (these may already be inserted into panels) KNOB (K2) x 2 SCREW (S30) x 2 HARDWARE M-B1 x 2 M-B2 x 2 M-LHS M-RHS M-BOT M- D1-LHS D1-RHS D1-CD D-B1 x 3 D1- D1-BOT D1-DOOR D2-LHS D2-RHS D2-CD D2- D2-BOT D2-DOOR D-VEL 12x12 x 6 4\9L x 8 2.5\5L x 11 1.5L x 6 ANELS SHELVES
STE 1 Attach six of the casters (C2) to the M-BOT as indicated using screws 35-17D. M-BOT 35-17D The casters attach to this side of the panel (the side showing the part label) STE 2 Screw a cam bolt into each of the four holes indicated. These need to be screwed into the opposite side to the casters. screw in to this point STE 3 Screw a cam bolt into each of the four holes indicated on both of the anels. Two need into one side of the panel and two into the opposite side. (SIDE 1) (SIDE 2)
STE 4 Attach the both of the M-B1 panels, M-B2 and both of the together as indicated. Once slotted together ensure you tighten the cam locks. M-B1 M-B2 M-B1 STE 5 Attach the section you have already assembled to the M-BOT as shown below and tighten the cam locks. M-B1 M-B2 M-B1
STE 6 Screw a Cam Bolt (CB1) into each of the holes indicated below M-RHS screw in to this point M-LHS STE 7 AB1 Attach the brackets (AB1) to the left and right hand sides using screws (35-17D) as shown below. M-LHS M-RHS 35-17D
STE 8 Attach the M-LHS and the M-RHS to the assembled sections. Secure by tightening the cam locks in the both of the backs (M-B1) and the base (M-BOT). M-RHS M-B1 M-B2 M-B1 M-LHS STE 9 M-BOT M-LHS Fix the brackets that you have already attached to the sides to the base using screws (35-17D) as shown below.
STE 10 Screw a Cam Bolt (CB1) into each of the holes indicated below M- STE 11 Attach the M- to the assemble main section. Secure by tightening the cam locks in the both the s and the M-LHS and the M-RHS. M-B1 M-B2 M-B1 M-LHS M-
STE 10 Insert shelf pegs and shelves to fit the storage boxes as shown below. Start from each section from the bottom and work upwards when fitting the shelves and boxes to ensure the correct shelf spacing. STE 11 Attach the remaining eight casters (C2) to the D1-BOT and the D2-BOT using screws 35-17D as shown below. D2-BOT D1-BOT STE 12 Screw a cam bolt into each of the four holes indicated. These need to be screwed into the opposite side to the casters. D2-BOT D1-BOT screw in to this point
STE 13 Screw a cam bolt into each of the four holes indicated on the D1-CD anel. Two need into one side of the panel and two into the opposite side. D1-CD D1-CD (SIDE 1) (SIDE 2) STE 14 Screw a cam bolt into each of the two holes indicated on the D2-CD anel. D2-CD (SIDE 2) STE 15 Attach two of the D-B1 panels to the D1-CD as indicated. Attach one of the D-B1 panels to the D2CD as indicated. Once slotted together ensure you tighten the cam locks. D2-CD D1-CD
STE 16 Screw a Cam Bolt (CB1) into each of the holes indicated below D1- D2- STE 17 Attach the sections you have already assembled to the D1-, D1-BOT, D2- and D2-BOT tas shown below. Once slotted together ensure you tighten the cam locks. D1- D1-BOT D1-CD D1-CD D2- D2-BOT
STE 18 Screw a Cam Bolt (CB1) into each of the holes indicated below screw in to this point D1-LHS D1-RHS D2-RHS D2-LHS STE 19 Attach the brackets (AB1) to the left and right hand sides shown above using screws (35-17D). Refer to step 7 for detailed instructions of this step.. STE 20 D1- D2- D1-BOT D2-BOT D2-RHS D2-CD D2-LHS D1-RHS D1-CD D1-LHS Attach the left and right hand sides to the assembled sections. Secure by tightening the cam locks in the both of the backs, tops and bases.
STE 21 Fix the brackets that you have already attached to the sides to the bases using screws (35-17D) as shown below. For detailed instructions refer to step 9. STE 22 Screw a Cam Bolt (CB1) into each of the holes indicated below D1-DOOR D2-DOOR STE 23 Fit the front door panels to the assembled sections and tighten the cam locks to secure. STE 24 Fit the door sections to the main sections that is already assembled. Secure the hinges using screws 3-15C. STE 25 Attach the door knobs. Attach the velcro panel to the Door 2 section using screws 3-15C. Attach the magnetic catches using the pre-drilled holes.
STE 26 Insert shelf pegs and shelves to fit the storage boxes as shown below. Start each section from the bottom and work upwards when fitting the shelves and boxes to ensure the correct shelf spacing.
fold away petite storage storage storage 4 C R A F T S 4 O F F I C E 0800 048 8606 www.storage4crafts.com 4 H O M E