Comp act Rotation Stages Rotation Stage DT-6 N Rotation Stage RS-40 Rotation Stage DT-80 R Rotation Stage DT-0 www.pimicos.com // info@pi-usa.us Rotation Stage DT-80 Rotation Stage DT-34 // 08.832.346 East 949.679.9191 West // www.pi-usa.us
.176 Rotation Stage RS-40 FACTS Load characteristics DC-B-009 2Phase-0 The RS-40 rotation stage is very compact Fx(N) Fz(N) Mx(Nm) Mz(Nm) k x(µrad/nm) 2 0.2 270 1 0.2 270 but offers a big mm (2 mm holding diameter) aperture. A precision bearing guarantees a perfectly smooth move. The RS-40 rotation stages have nearly zero backlash worm gear reduction. All RS-40 motorized rotation stages are equipped with a hall reference switch and are offered with a DC or geared stepper motor. TECHNICAL DATA Travel range ( ) 360, endless Flatness (Bearings) (µm) ± Eccentricity (Bearings) (µm) ± 3 Weight (kg) 0.4 Motor Speed max. ( /sec) Resolution calculated ( ) KEY FEATURES Clear aperture mm DC-B-009 2Phase-0 7 0.00003 (RE) 0.0021961 (FS) Resolution typical ( ) 0.00 0.00 Bi-directional Repeatability ( ) ± 0.04 ± 0.04 Uni-directional Repeatability ( ) 0.00 0.00 0.16 0.2 Nominal Current (A) Uni-directional repeatability down to 0.00 Voltage Range (V) Maximum speed 7 /sec Worm gear reduction Load capacity up to 1 kg Accuracy Integrated hall reference switch Velocity range ( /sec) Optionally rotary encoder on the rotation axis ± Wobble (Bearings) (µrad) Material 12 90:1 on request 0.002... 7 Aluminum, black anodized, stainless steel, red brass Note: FS = full step, RE = rotary encoder More info: Detailed information concerning motors and encoders, see appendix. Error and technical modifications are subject to change
Rotation Stage RS-40.177 ~44 ~43,7 DC-B-009 2Phase-0 4x Ø4. 34 4x M3 x4 16 4x M2 x4 o n2h7 x9 2x M2. x3 o Ø31 6 0 n 2x Ø2H7 x4 30 30 14 64 13. Order No. 3216-9- 0 0 11. DC-B-009 1 2Phase-0 2 2x M4 x4 2 HLS-0, Hall switch 1 mm www.pimicos.com // info@pi-usa.us // 08.832.346 East 949.679.9191 West // www.pi-usa.us
.184 Rotation Stage DT-34 FACTS Load characteristics Fx (N) Fz (N) Mx (Nm) Mz (Nm) k x (µrad/nm) DC-B-0 2. 1 2. 0.9 0 2Phase-0 2. 2. 0.3 0 The DT-34 rotation stages are a very compact low cost alternative to the PI micos RS-40 stage but the belt driven design allows a much higher speed of rotation in comparison to other stages. The clear aperture of mm diameter is suitable for many applications in the microscopy area. The belt driven combination is preloaded to produce near zero backlash and a smooth motion. The DT-34 rotation stages are equipped with optical reference switches and are driven by a DC or 2 phase stepper motor. TECHNICAL DATA Travel range ( ) 360, endless KEY FEATURES Uni-directional repeatability down to 0.01 Load capacity up to 0. kg Integrated optical reference switch Clear aperture mm Motor DC-B-0 2Phase-0 Speed max. ( /sec) 67 19 Resolution calculated ( ) 0.00004 (RE) 0.0098 (FS) Resolution typical ( ) 0.00044 0.00 Bi-directional Repeatability ( ) ± 0.04 ± 0.04 Uni-directional Repeatability ( ) 0.01 0.01 Nominal Current (A) 0.32 0.2 Voltage Range (V) 12 Accuracy on request Velocity range ( /sec) 0.0... 67 Material Note: FS = full step, RE = rotary encoder More info: Detailed information concerning motors and encoders, see appendix. Error and technical modifications are subject to change
Rotation Stage DT-34.18 DC-B-0 2Phase-0 8 9 2 1.7 A 18. A ( 2 : 1 ) 0.3"- 40 UNS - 2B x7 to clamp lenses with Dia Ø1/2" and thickness between 2 & 7 mm 17. 4 M2.x/7 (4x) Ø3.4/vØ6x6. (1x) 12. 30 12. 12. 2 34 30. M4x4/ (2x) n M2. - 6H 12. 17 n3.4 DURCH DIN 974 - n6 X 6. Order No. 321-9- 0 0 0 DC-B-0 1 2Phase-0 2 OLS-030, Optical limit switch 3 mm www.pimicos.com // info@pi-usa.us // 08.832.346 East 949.679.9191 West // www.pi-usa.us
.182 Rotation Stage DT-0 FACTS The DT-0 rotation stages are a low cost Fx(N) Fz(N) Mx(Nm) Mz(Nm) k x(µrad/nm) DC-B-029 0.1 2Phase-047 0.1 0.1 Load characteristics and lower accuracy alternative to the PI micos RS-40 stage. The belt driven DT-0 rotation stage allows a much higher speed of rotation in comparison to other stages. The clear aperture of mm diameter is suitable for many applications in the microscopy area. The belt driven combination is preloaded to produce near zero backlash and a smooth motion. The DT-0 rotation stages are equipped with hall reference switches and are driven by a DC or 2-phase stepper motor. Additionally the DT-0 can be ordered with our SMC pollux motor-controller module. TECHNICAL DATA Travel range ( ) 360, endless Weight (kg) Motor 0.14 DC-B-029 2Phase-047 4000 10 160 0.06 (RE) 0.3 (FS) 0.6 (FS) Speed max. ( /sec) Resolution calculated ( ) KEY FEATURES Resolution typical ( ) 0.00 0.00 0.00 Bi-directional Repeatability ( ) ± 0.03 ± 0.03 ± 0.03 Uni-directional Repeatability ( ) 0.01 0.01 0.01 1.17 1.2 0. Nominal Current (A) Uni-directional repeatability down to 0.01 Voltage Range (V) Maximum speed 4000 /sec Belt Drive Reduction Load capacity up to 1 kg Accuracy Integrated hall reference switch Velocity range ( /sec) Clear aperture mm Material 24 3:1 on request 0.0... 4000 Aluminum, black anodized Note: FS = full step, RE = rotary encoder More info: Detailed information concerning motors and encoders, see appendix. Error and technical modifications are subject to change
Rotation Stage DT-0.183 70. 87 DC-B-029 2Phase-047 SMC-Pollux Controller integrated 2x M3 x6. 4.4 2x M3 x6 9 4x M3 x6 o40 o 4x vn8x4.6 / Ø4. n3 0 Order No. 643-9- DC-B-029 1 0 0 n 2Phase-047 2 3 2 n2h7 x9. HLS-0, Hall switch 1 mm www.pimicos.com // info@pi-usa.us // 08.832.346 East 949.679.9191 West // www.pi-usa.us
.174 Rotation Stage DT-6 N FACTS The Fx(N) Fz(N) Mx(Nm) Mz(Nm) k x(µrad/nm) DC-B-031 1 30 0.8 180 2Phase-04 1 30 0.8 180 Load characteristics rotation stages DT-6 N are fabricated from a special high-rigidity tempered aluminum alloy. A pre-loaded four-point double row ball bearing guarantees good wobble and flatness specifications. A hardened and ground worm screw combined with a calibrated worm gear guarantees minimum backlash. All motorized rotation DT-6 N stages are equipped with a reference switch. Drive variations such as DC or 2-phase stepper motors are available. TECHNICAL DATA Travel range ( ) 360, endless Flatness (Bearings) (µm) ±6 Eccentricity (Bearings) (µm) ± 30 Weight (kg) 1.3 Motor Speed max. ( /sec) Resolution calculated ( ) KEY FEATURES Uni-directional repeatability down to 0.002 DC-B-031 2Phase-04 60 4 0.001 (RE) 0.01 (FS) Resolution typical ( ) 0.002 0.002 Bi-directional Repeatability ( ) ± 0.01 ± 0.01 Uni-directional Repeatability ( ) 0.002 0.002 1.96 1.2 Nominal Current (A) Maximum speed 60 /sec Voltage Range (V) Load capacity up to 3 kg Worm gear reduction Integrated mechanical reference switch Accuracy Clear aperture 2 mm Velocity range ( /sec) Optionally rotary encoder on the rotation axis ±6 Wobble (Bearings) (µrad) Material 24 180:1 on request 0.001... 60 Aluminum, black anodized, red brass Note: FS = full step, RE = rotary encoder More info: Detailed information concerning motors and encoders, see appendix. Error and technical modifications are subject to change
o o Rotation Stage DT-6 N.17 144 118. DC-B-031 2Phase-04 7 2x n3h7 x 0 34 2x M4 x6 0 2x n6.2 118. 2 9. 42 21 4x M4 x 2 4x M2. x n40 / 4x Ø4H7 x 2x M4 x6 11. n30 / 4x Ø3H7 x 32. 4 2 32. 2.4 92. n2h7 2x v n x6.2 32. 70 n8 2 Order No. 6440-9- 0 0 11. DC-B-031 1 2Phase-04 3 2x M4 x 32. mm www.pimicos.com // info@pi-usa.us // 08.832.346 East 949.679.9191 West // www.pi-usa.us
.178 Rotation Stage DT-80 FACTS PRS-1 high precision rotation stages. Fx(N) Fz(N) Mx(Nm) Mz(Nm) k x(µrad/nm) DC-B-029 0.1 2Phase-041 0.1 0.1 Load characteristics They are mainly developed for simple positioning in the laboratory. The large aperture of 40 mm diameter is suitable for many applications in the microscopy area. The worm screw and worm gear combination is preloaded to produce a near "zero-backlash" and smooth motion. Rotation stages of the DT-80 series can be driven by a DC or 2-phase stepper motor and are equipped with a mechanical reference switch. Additionally the DT-80 can be ordered The DT-80 rotation stages are a low cost with our SMC pollux motor-controller alternative to the PI micos DT-6 N and module ( ). TECHNICAL DATA Travel range ( ) 360, endless Flatness (Bearings) (µm) ± 30 Eccentricity (Bearings) (µm) ± 30 Wobble (Bearings) (µrad) ± 0 Weight (kg) Motor 0.8 DC-B-029 2Phase-041 40 30 30 0.001 (RE) 0.01 (FS) 0.01 (FS) Resolution typical ( ) 0.004 0.004 0.004 Bi-directional Repeatability ( ) ± 0. ± 0. ± 0. Uni-directional Repeatability ( ) 0.01 0.01 0.01 Nominal Current (A) 1.17 1.7 0. Speed max. ( /sec) Resolution calculated ( ) KEY FEATURES Uni-directional repeatability down to 0.01 Voltage Range (V) Maximum speed 40 /sec Worm gear reduction Load capacity up to 2 kg Accuracy Integrated mechanical reference switch Velocity range ( /sec) Clear aperture 40 mm Material 24 180:1 on request 0.001... 40 Aluminum, black anodized, red brass Note: FS = full step, RE = rotary encoder More info: Detailed information concerning motors and encoders, see appendix. Error and technical modifications are subject to change
Rotation Stage DT-80.179 1 9. 1 48 DC-B-029 2Phase-041 SMC-Pollux Controller integrated 6 2x M4 x8 0 2x n4. 0 34 4x M4 x6 34 2 4x M4 x6 2 30 12 21 42 12 32. 9.1 8.9 32. 83 4x M4 x o34 7.2 86 Order No. 6443-9- DC-B-029 1 2Phase-041 2 4 0 0 32. 32. n40h7 n64 mm www.pimicos.com // info@pi-usa.us // 08.832.346 East 949.679.9191 West // www.pi-usa.us
.180 Rotation Stage DT-80 R FACTS The DT-80 R rotation stage is a low cost Fx(N) Fz(N) Mx(Nm) Mz(Nm) k x(µrad/nm) DC-B-013 0.1 2Phase-047 0.1 0.1 Load characteristics alternative to the PI micos DT-6 N and PRS-1 high precision rotation stages. The preloaded belt driven DT-80 R produces a nearly zero backlash and smooth motion and allows a much higher speed of rotation in comparison to other stages. The large aperture of 40 mm diameter is suitable for many applications in the microscopy area. The DT-80 R is equipped with hall reference switches and is driven by a DC or 2-phase stepper motor. Additionally the DT-80 R can be ordered with our SMC pollux motorcontroller module. TECHNICAL DATA Travel range ( ) 360, endless Flatness (Bearings) (µm) ± 30 Eccentricity (Bearings) (µm) ± 30 Wobble (Bearings) (µrad) ± 0 Weight (kg) Motor 0.8 DC-B-013 2Phase-047 270 900 1170 0.001482 (RE) 0.22 (FS) 0.4 (FS) Speed max. ( /sec) KEY FEATURES Uni-directional repeatability down to 0.01 Maximum speed 1170 /sec Resolution calculated ( ) Resolution typical ( ) 0.004 0.004 0.004 Bi-directional Repeatability ( ) ± 0.02 ± 0.03 ± 0.03 Uni-directional Repeatability ( ) 0.01 0.01 0.01 Nominal Current (A) 0.28 1.2 0. Load capacity up to 2 kg Voltage Range (V) Integrated hall reference switches Belt Drive Reduction Limit switches adjustable Accuracy Clear aperture 40 mm Velocity range ( /sec) Optionally totally closable iris diaphragm Material 24 4:1 on request 0.001... 1170 Aluminum, black anodized, red brass Note: FS = full step, RE = rotary encoder More info: Detailed information concerning motors and encoders, see appendix. Error and technical modifications are subject to change
Rotation Stage DT-80 R.181 81. 76. 1 DC-B-013 2x M4 x8 2Phase-047 0 2x n4. SMC-Pollux Controller integrated 0 4x M4 x6 34 2 4x M4 x6 34 2 30 12 19.1 12 32. 4x M4 x4 o34 83 138.2 32. 7.2 8.8 Order No. 640-9- 0 0 1 32. DC-B-013 1 2Phase-047 2 3 n64 32. n40h7 mm www.pimicos.com // info@pi-usa.us // 08.832.346 East 949.679.9191 West // www.pi-usa.us
USA (East) & CANADA USA (West) & MEXICO PI (Physik Instrumente) L.P. PI (Physik Instrumente) L.P. 16 Albert St. 4 Trabuco Rd., Suite 0 Auburn, MA 01 Irvine, CA 926 Tel: +1 (08) 832 346 Tel: +1 (949) 679 9191 Fax: +1 (08) 832 006 Fax: +1 (949) 679 9292 Email: info@pi-usa.us Email: info@pi-usa.us www.pi-usa.us www.pi-usa.us GERMANY Headquarters: PI micos GmbH Freiburger Strasse 30 D-79427 Eschbach GERMANY Phone: +49 7634 0 7 0 Fax: +49 7634 0 7 393 e-mail: info@pimicos.com home: www.pimicos.com Physik Instrumente (PI) GmbH & Co. KG Auf der Römerstraße 1 76228 Karlsruhe/Palmbach Tel: +49 (721) 4846-0 Fax: +49 (721) 4846-19 Email: info@pi.ws www.pi.ws Call Us Today 08.832.346 (East) 949.679.9191 (West)