PHOTOCOUPLER PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 HIGH ISOLATION VOLTAGE SINGLE TRANSISTOR TYPE MULTI PHOTOCOUPLER SERIES NEPOC Series DESCRIPTION The PS2561A-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon phototransistor to realize an excellent cost performance. The PS2561A-1 is in a plastic DIP (Dual In-line Package) and the PS2561AL-1 is lead bending type (Gull-wing) for surface mount. The PS2561AL1-1 is lead bending L1 type and the PS2561AL2-1 is lead bending L2 type (Gull-wing). FEATURES High isolation voltage (BV = 5 000 Vr.m.s.) Ordering number of taping product: PS2561AL-1-E3, E4, F3, F4 : PS2561AL2-1-E3, E4 Pb-Free product Safety standards UL, BSI, CSA, NEMKO, DEMKO, SEMKO, FIMKO, approved DIN EN60747-5-2 (VDE0884 Part2) approved (option) PIN CONNECTION (Top View) 4 3 1 2 1. Anode 2. Cathode 3. Emitter 4. Collector APPLICATIONS Power supply Telephone/FAX. FA/OA equipment Programmable logic controller Document No. PN222EJ03V0DS (3rd edition) Date Published November 2004 CP(K) The mark shows major revised points.
PACKAGE DIMENSIONS (UNIT : mm) DIP Type Long Creepage Distance PS2561A-1 4.6±0.35 4 3 4.6±0.35 4 3 PS2561AL1-1 4.15±0.4 6.5±0.5 3.5±0.3 1 2 7.62 6.5±0.5 1 2.16 3.2±0.4 1.25±0.15 2.54 0 to 15 0.25 +0.1 0.05 0.50±0. 0.25 M 3.85 ±0.4 3.15 ±0.35 3.5 ±0.3 1.25±0.15 0.50±0.1 0.25 M 2.54 0.25 +0.1 0.05 0 to 15 Lead Bending Type (Gull-Wing) PS2561AL-1 4.6±0.35 4 3 Long Creepage Distance (Gull-Wing) PS2561AL2-1 4.6±0.35 4 3 3.5±0.3 6.5±0.5 6.5±0.5 1.25±0.15 0.25 M 1 2 0.25 +0.1 0.05 0.9±0.25 9.60±0.4 0.1 +0.1 0.05 3.5±0.3 1.25±0.15 0.25 M 1 2 2.54 0.25 0.25±0.2 0.9±0.25.16 11.8 +0.2 0.5 0.25 +0.1 0.05 2.54 0.15 2 Data Sheet PN222EJ03V0DS
MARKING EXAMPLE No. 1 pin Mark 2561A N 301 Assembly Lot N 3 01 Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Package Solder Plating Specification Made in Japan Made in Taiwan New PKG Solder contains lead E H Pb-Free J K Data Sheet PN222EJ03V0DS 3
ORDERING INFORMATION (1/2) Part Number Order Number Solder Plating Specification Packing Style Safety Standard Approval Application Part Number *1 PS2561A-1 PS2561A-1 Solder Magazine case 0 pcs Standard products PS2561A-1 PS2561AL-1 PS2561AL-1 contains lead (UL, CSA, BSI, PS2561AL1-1 PS2561AL1-1 NEMKO, DEMKO, PS2561AL2-1 PS2561AL2-1 SEMKO, FIMKO PS2561AL-1-E3 PS2561AL-1-E3 Embossed Tape 1 000 pcs/reel approved) PS2561AL-1-E4 PS2561AL-1-E4 PS2561AL2-1-E3 PS2561AL2-1-E3 Embossed Tape 1 000 pcs/reel PS2561AL2-1-E4 PS2561AL2-1-E4 PS2561AL-1-F3 PS2561AL-1-F3 Embossed Tape 2 000 pcs/reel PS2561AL-1-F4 PS2561AL-1-F4 PS2561A-1-V PS2561A-1-V Magazine case 0 pcs DIN EN60747-5-2 PS2561AL-1-V PS2561AL-1-V (VDE0884 Part2) PS2561AL1-1-V PS2561AL1-1-V Approved products PS2561AL2-1-V PS2561AL2-1-V (option) PS2561AL-1-V-E3 PS2561AL-1-V-E3 Embossed Tape 1 000 pcs/reel PS2561AL-1-V-E4 PS2561AL-1-V-E4 PS2561AL2-1-V-E3 PS2561AL2-1-V-E3 Embossed Tape 1 000 pcs/reel PS2561AL2-1-V-E4 PS2561AL2-1-V-E4 PS2561AL-1-V-F3 PS2561AL-1-V-F3 Embossed Tape 2 000 pcs/reel PS2561AL-1-V-F4 PS2561AL-1-V-F4 PS2561A-1 PS2561A-1-A Pb-Free Magazine case 0 pcs Standard products PS2561AL-1 PS2561AL-1-A (UL, CSA, BSI, PS2561AL1-1 PS2561AL1-1-A NEMKO, DEMKO, PS2561AL2-1 PS2561AL2-1-A SEMKO, FIMKO PS2561AL-1-E3 PS2561AL-1-E3-A Embossed Tape 1 000 pcs/reel approved) PS2561AL-1-E4 PS2561AL-1-E4-A PS2561AL2-1-E3 PS2561AL2-1-E3-A Embossed Tape 1 000 pcs/reel PS2561AL2-1-E4 PS2561AL2-1-E4-A PS2561AL-1-F3 PS2561AL-1-F3-A Embossed Tape 2 000 pcs/reel PS2561AL-1-F4 PS2561AL-1-F4-A *1 For the application of the Safety Standard, following part number should be used. 4 Data Sheet PN222EJ03V0DS
ORDERING INFORMATION (2/2) Part Number Order Number Solder Plating Specification Packing Style Safety Standard Approval Application Part Number *1 PS2561A-1-V PS2561A-1-V-A Pb-Free Magazine case 0 pcs DIN EN60747-5-2 PS2561A-1 PS2561AL-1-V PS2561AL-1-V-A (VDE0884 Part2) PS2561AL1-1-V PS2561AL1-1-V-A Approved products PS2561AL2-1-V PS2561AL2-1-V-A (option) PS2561AL-1-V-E3 PS2561AL-1-V-E3-A Embossed Tape 1 000 pcs/reel PS2561AL-1-V-E4 PS2561AL-1-V-E4-A PS2561AL2-1-V-E3 PS2561AL2-1-V-E3-A Embossed Tape 1 000 pcs/reel PS2561AL2-1-V-E4 PS2561AL2-1-V-E4-A PS2561AL-1-V-F3 PS2561AL-1-V-F3-A Embossed Tape 2 000 pcs/reel PS2561AL-1-V-F4 PS2561AL-1-V-F4-A *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN222EJ03V0DS 5
ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified) Parameter Symbol Ratings Unit Diode Reverse Voltage VR 6 V Forward Current (DC) IF 30 ma Power Dissipation Derating PD/ C 1.5 mw/ C Power Dissipation PD 150 mw Peak Forward Current *1 IFP 0.5 A Transistor Collector to Emitter Voltage VCEO 70 V Emitter to Collector Voltage VECO 5 V Collector Current IC 30 ma Power Dissipation Delay PC/ C 1.5 mw/ C Power Dissipation PC 150 mw Isolation Voltage *2 BV 5 000 Vr.m.s. Operating Ambient Temperature TA 55 to +0 C Storage Temperature Tstg 55 to +150 C *1 PW = 0 µs, Duty Cycle = 1% *2 AC voltage for 1 minute at TA = 25 C, RH = 60% between input and output 6 Data Sheet PN222EJ03V0DS
ELECTRICAL CHARACTERISTICS (TA = 25 C) Parameter Symbol Conditions MIN. TYP. MAX. Unit Diode Forward Voltage VF IF = ma 1.2 1.4 V Reverse Current IR VR = 5 V 5 µa Terminal Capacitance Ct V = 0 V, f = 1.0 MHz pf Transistor Collector to Emitter Dark Current ICEO VCE = 70 V, IF = 0 ma 0 na Coupled Current Transfer Ratio CTR IF = 5 ma, VCE = 5 V 50 300 % (IC/IF) *1 Collector Saturation Voltage VCE (sat) IF = ma, IC = 2 ma 0.13 0.3 V Isolation Resistance RI-O VI-O = 1.0 kvdc 11 Ω Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz 0.4 pf Rise Time *2 tr VCC = V, IC = 2 ma, RL = 0 Ω 5 µs Fall Time *2 tf 7 *1 CTR rank N : 50 to 300 (%) H : 80 to 160 (%) Q : 0 to 200 (%) W : 130 to 260 (%) *2 Test circuit for switching time Pulse Input VCC PW = 0 µ s Duty Cycle = 1/ IF 50 Ω VOUT RL = 0 Ω Data Sheet PN222EJ03V0DS 7
TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified) Diode Power Dissipation PD (mw) 200 150 0 50 DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE 1.5 mw/ C 0 25 50 75 0 125 Ambient Temperature TA ( C) Transistor Power Dissipation PC (mw) 200 150 0 50 TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 1.5 mw/ C 0 25 50 75 0 125 Ambient Temperature TA ( C) 0 FORWARD CURRENT vs. FORWARD VOLTAGE 25 COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE Forward Current IF (ma) 50 5 1 0.5 0.1 0.05 0.7 0.8 TA = +0 C +60 C +25 C 0.9 1.0 1.1 1.2 1.3 0 C 25 C 55 C 1.4 1.5 Collector Current IC (ma) 20 15 5 0 2 4 6 8 IF = ma IF = 5 ma IF = 2 ma IF = 1 ma Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) Collector to Emitter Dark Current ICEO (na) 000 1 000 COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE 0 VCE = 70 V VCE = 24 V 1 0 25 50 75 0 Collector Current IC (ma) COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 1 IF = ma IF = 5 ma IF = 2 ma IF = 1 ma 0.1 0 0.2 0.4 0.6 0.8 1.0 Ambient Temperature TA ( C) Collector Saturation Voltage VCE(sat) (V) Remark The graphs indicate nominal characteristics. 8 Data Sheet PN222EJ03V0DS
Normalized Current Transfer Ratio CTR 1.4 1.2 1.0 0.8 NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE 0.6 Normalized to 1.0 at TA 0.4 = 25 C, IF = 5 ma, VCE = 5 V 0.2 CTR:130% CTR:270% 0 50 25 0 25 50 75 0 Ambient Temperature TA ( C) Current Transfer Ratio CTR (%) 300 250 200 150 0 50 CURRENT TRANSFER RATIO vs. FORWARD CURRENT VCE = 5 V, n = 2 Sample A B 0 0.01 0.1 1 0 Forward Current IF (ma) Switching Time t ( µ s) 0 1 SWITCHING TIME vs. LOAD RESISTANCE IC = 2 ma, VCC = V, CTR = 216% tf tr td ts Switching Time t ( µ s) 1 000 0 SWITCHING TIME vs. LOAD RESISTANCE IF = 5 ma, VCC = 5 V, CTR = 216% tf ts tr 0.1 0 1 000 000 Load Resistance RL (Ω) 1 1 0 td Load Resistance RL (kω) 5 0 FREQUENCY RESPONSE 1.2 1.0 LONG TERM CTR DEGRADATION IF = 5 ma (TYP.) Normalized Gain GV 5 0 Ω 300 Ω 15 RL = 1 kω 20 IF = 5 ma, VCE = 5 V 25 0.1 1 0 1 000 CTR (Relative Value) 0.8 0.6 0.4 0.2 0 TA = 25 C TA = 60 C 2 3 4 5 Frequency f (khz) Time (Hr) Remark The graphs indicate nominal characteristics. Data Sheet PN222EJ03V0DS 9
TAPING SPECIFICATIONS (UNIT : mm) Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 φ1.5 +0.1 0 1.75±0.1 4.5 MAX. 7.5±0.1 16.0±0.3.3±0.1 1.55±0.1 5.3±0.1 4.0±0.1 8.0±0.1 0.4 Tape Direction PS2561AL-1-E3 PS2561AL-1-E4 Outline and Dimensions (Reel) 2.0±0.5 2.0±0.5 φ13.0±0.2 R 1.0 φ21.0±0.8 254±2.0 φ 80.0±1.0 φ 17.5±1.0 21.5±1.0 Packing: 1 000 pcs/reel 15.9 to 19.4 Outer edge of flange Data Sheet PN222EJ03V0DS
Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 φ1.5 +0.1 0 1.75±0.1 4.5 MAX. 7.5±0.1 16.0±0.3.3±0.1 1.55±0.1 5.3±0.1 4.0±0.1 8.0±0.1 0.4 Tape Direction PS2561AL-1-F3 PS2561AL-1-F4 Outline and Dimensions (Reel) 2.0±0.5 2.0±0.5 φ13.0±0.2 R 1.0 φ21.0±0.8 330±2.0 φ 0±1.0 φ 17.5±1.0 21.5±1.0 Packing: 2 000 pcs/reel 15.9 to 19.4 Outer edge of flange Data Sheet PN222EJ03V0DS 11
Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 1.55±0.1 1.75±0.1 4.4±0.2 11.5±0.1 24.0±0.3 12.35±0.15 2.05±0.1 6.6±0.2 0.38 12.0±0.1 Tape Direction PS2561AL2-1-E3 PS2561AL2-1-E4 Outline and Dimensions (Reel) 2.0±0.5 2.0±0.5 φ13.0±0.2 R 1.0 φ21.0±0.8 φ330±2.0 φ 0±1.0 25.5±1.0 29.5±1.0 Packing: 1 000 pcs/reel 23.9 to 27.4 Outer edge of flange 12 Data Sheet PN222EJ03V0DS
NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering Peak reflow temperature Time of peak reflow temperature Time of temperature higher than 220 C Time to preheat temperature from 120 to 180 C Number of reflows Flux 260 C or below (package surface temperature) seconds or less 60 seconds or less 120±30 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T ( C) 120 C 120±30 s (preheating) 180 C (heating) to s to 60 s 260 C MAX. 220 C Time (s) (2) Wave soldering Temperature Time Preheating conditions Number of times Flux 260 C or below (molten solder temperature) seconds or less 120 C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron Peak temperature (lead part temperature) Time (each pins) Flux 350 C or below 3 seconds or less Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 0 C. Data Sheet PN222EJ03V0DS 13
(4) Cautions Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler s input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. 14 Data Sheet PN222EJ03V0DS
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix A indicates that the device is Pb-free. The AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Concentration Limit per RoHS (values are not yet fixed) < 00 PPM Concentration contained in CEL devices -A -AZ Not Detected (*) Mercury < 00 PPM Not Detected Cadmium < 0 PPM Not Detected Hexavalent Chromium < 00 PPM Not Detected PBB < 00 PPM Not Detected PBDE < 00 PPM Not Detected If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.