LED Neon Light Arch
LED Neon Light Arch Length CST Custom Length cuttable every 2.81 Operating Voltage (ov) 24V DC Finish (fin) WHT White 2700K Incandescent White 3000K Warm White 3500K Sand White Light Colour (lc) 4000K Neutral White Correlated Colour Temperature 5000K Cool White (CCT) RGB Colour Changing Refer to RGB cutsheet R Red * G Green * B Blue * O Orange * P Pink * Y Yellow * V Violet * A Snap Connection (con) S Side * B Bottom * E End * Cable Length (cab) 10 10 feet 30 30 feet 02 2 feet 05 5 feet CST * Custom length and connector Beam Angle (ba) Degrees 160 Light Output Lumens IP Rating Dimension Width, Height, Length Watts Project: Part #: NEON -P ARC 24VDC WHT lc con cab 2700K 430 per foot 3000K 454 per foot 3500K 471 per foot 4000K 489 per foot 5000K 524 per foot IP68 W 0.62 16 mm H 0.66 17 mm L Specify maximum length in inches 4.57W per foot Input Voltage AC 100V 240V, 277V, 347V external transformer Dimmable Yes With dimmable transformer MLV, ELV or 0-10V Operating Temperature 25 C to +50 C 13 F to 122 F Life Lumen Maintenance 50,000 hours SPECIFICATION Part Number Configuration NEON-P-ARC-ov-fin-lc-con-cab Category Grade Family * Available on special order Can be Field Installed See Connections page(s) for more details Operating Voltage (ov) Finish (fin) Light Colour (lc) NEON P-Professional ARC 24VDC WHT White 2700K IW 3000K WW 3500K SW 4000K NW 5000K CW RGB R * G * B * A * P * Y * V * Connection (con) A Snap S Side * B Bottom * E End * Cable Length (cab) 02 05 10 30 CST *
Part #: NEON -P ARC 24VDC WHT lc con cab LED Neon Light Arch Snap Connect Field Installation Low Profile Snap Connector A Factory OR Field Install CONNECTIONS 52 25 Custom Length (Maximum 10 meters) 24.5 20 Meters (Must have dual power) 3 1 Fit Neon strip through clear PC cover. Move the cover down to make room. 1A PC Cover has two sides. Ensure snap end is closest to the connector. 2 Insert connector behind PCB. See following panel for more detail. Snap End Rear End Note: Once connected there will be a 2-5mm gap between connector and light PCB LED board 3 Flatten out Self-locking Clip. Align it with Neon strip and fold up. 4 Align steel U-Plate with connector guides and snap on. Insert connector here (Between PCB and PVC) Fold flaps in PVC Housing Bottom tab sticks out 5 The U-Plate uses the conncetor guides to automatically tighten the seal 6 Bring clear PC cover back towards the front of the strip to cover connection. Finished view of Connector (Repeat Steps 1 6 to install End Cap)
Part #: NEON -P ARC 24VDC WHT lc con cab LED Neon Light Arch Factory Connection Options End Connector E * Injection Molded Factory Installed 16 Custom Length (Maximum 10 meters) CONNECTIONS 11 19 12 20 Meters (Must have dual power) 20 18 11 18 Side Connector S * Injection Molded Factory Installed Custom Length (Maximum 10 meters) 19 12 20 Meters (Must have dual power) 19 30 1.8 16 Bottom Connector B * Injection Molded Factory Installed Custom Length (Maximum 10 meters) 18.8 29.8 20 Meters (Must have dual power) 12 11 18 * Available on special order
Part #: NEON -P ARC 24VDC WHT lc con cab LED Neon Light Arch Cable Options CONNECTIONS Cable Options for Single Colour 02, 05, 10, 30 or CST (Custom length) 3 in 31 mm 5 in Easy Quick Connects 2ft, 5ft, 10ft, 30ft or CST (Minimum 3in) Hard wire to Power supply 15 mm Cable Junction 10 mm Total length when connected 34 mm 36 mm Black Negative Red Positive + To Transformer 10 mm To Lights 27 mm Red Positive + Black Negative 11 mm 55 mm 11 mm 18AWG 2 Conductor Shielded Cable CABLE-32-18AWG-2S 4.1 mm Shielding Red wire 1.8 mm 14 mm 17 mm Custom Length Black wire 1.8 mm
Part #: TRACK NEON 2120SL CST fin N LED Track Neon 2120 Self-Locking SPECIFICATION Finish (fin) Custom Length Housing WHT White * SIL Silver BLK Black * Custom Track lengths available Please specify length in inches Standard length 1 m (39 ), maximum 2.5 m (98 ) Aluminum Alloy Compatible Lights Arch LED Neon Light NEON-P-ARC-ov-fin-lc-con-cab 02 20 20.5 Dimensions in millimeters Part Number Configuration TRACK-NEON-2120SL-CST-fin-ln-N Finish Category Family (fin) TRACK NEON 2120 SL SIL Silver WHT White * BLK Black * Custom finishes available * Lens (ln) N None * Available on special order
Part #: TRACK NEON 2120SL CST fin N LED Track Neon 2120 Self-Locking Straight Installation INSTALLATION Self-Locking clips will fit in here 20 1 meter or 2 meter lengths (field cuttable to custom lengths) 20.5 Track Dimensions (mm) Self-Locking Clip Screw head completely flush with bottom of track Only neon body fits inside track. Snap connector should fall just outside the track.
Part #: TRACK NEON 1918 CST fin N LED Track Neon 1918 SPECIFICATION Finish (fin) Custom Length Housing WHT White * SIL Silver BLK Black * Custom Track lengths available Please specify length in inches Standard length 1 m (39 ), maximum 2.5 m (98 ) Aluminum Alloy Compatible Lights Arch LED Neon Light NEON-P-ARC-ov-fin-lc-con-cab 02 18 19 Dimensions in millimeters Part Number Configuration TRACK-NEON-1918-CST-fin-ln-N Finish Category Family (fin) TRACK NEON 1918 SIL Silver WHT White * BLK Black * Custom finishes available * Lens (ln) N None * Available on special order
Part #: TRACK NEON 1918 CST fin N LED Track Neon 1918 Straight Installation INSTALLATION 18 1 meter or 2 meter lengths (field cuttable to custom lengths) 19 Track Dimensions (mm) Screw head completely flush with bottom of track Only neon body fits inside track. Snap connector should fall just outside the track.
Part #: CLIP NEON 2120SL 35MM fin N LED Clip Neon 2120 Self-Locking SPECIFICATION Finish (fin) WHT White * SIL Silver BLK Black * Length 1.37 35 mm (Tolerance +/ 0.3mm) Housing Aluminum Alloy Compatible Lights Arch LED Neon Light NEON-P-ARC-ov-fin-lc-con-cab 02 20 CLIP 20.5 35.2 CLIP CLIP Dimensions in millimeters Part Number Configuration CLIP-NEON-2120SL-35MM-fin Finish Category Family Length (fin) CLIP NEON 2120 SL 1.37 IN 35mm SIL Silver WHT White * BLK Black * Custom finishes available * * Available on special order
Part #: CLIP NEON 2120SL 35MM fin N LED Clip Neon 2120 Self-Locking Curved Installation INSTALLATION Self-Locking clip will fit in here 2 in 2 in Use multiple track clips to create a curved path for the LED Neon light. + +... 20 20.5 Track Dimensions (mm) Self-Locking Clip Screw head completely flush with bottom of track
Part #: CLIP NEON 1918 2IN fin N LED Clip Neon 1918 SPECIFICATION Finish (fin) WHT White * SIL Silver BLK Black * Custom Length 1.37 35 mm (Tolerance +/ 0.3mm) Housing Aluminum Alloy Compatible Lights Arch LED Neon Light NEON-P-ARC-ov-fin-lc-con-cab 02 14.7 CLIP 14 35.2 CLIP CLIP Dimensions in millimeters Part Number Configuration CLIP-NEON-1918-35MM-fin Finish Category Family Length (fin) CLIP NEON 1918 1.37 IN 35mm SIL Silver WHT White * BLK Black * Custom finishes available * * Available on special order
Part #: CLIP NEON 1918 2IN fin N LED Clip Neon 1918 Curved Installation INSTALLATION 2 in 2 in Use multiple track clips to create a curved path for the LED Neon light. + +... 18 19 Track Dimensions (mm) Screw head completely flush with bottom of track
+ + Project: Part #: NEON -P ARC 24VDC WHT lc con cab LED Neon Light Arch Wiring Instructions INSTALLATION LED ARCH NEON SINGLE COLOUR WIRING To Start: You will need: Marettes Clear silicone SGi LED Transformer(s) SGi LED Flex Light Strip(s) 12 to 18 AWG 2 conductor shielded cable * Non-dimmable drivers are available Magnetic Low Voltage Dimmer * 120V AC INPUT 120V AC Ground Transformer + RED PRL + RED BLK Ground E Line Voltage White + + D C Line Voltage Black + Output wire Purple ( ) A B Output wire Red (+) NEON-P-ARCH-ov-fin-lc-con-cab POWER-36-24VDC-watt DIMMABLE Max linear ft of light 20 Watt Power 40 Watt Power 60 Watt Power 96 Watt Power 150 Watt Power 200 Watt Power 300 Watt Power 3 ft 7 ft 10 ft 16.5 ft 26 ft 35 ft * 52 ft * Max Distance between power & light 12 AWG 300 ft 14 AWG 300 ft 16 AWG 238 ft 18 AWG 150 ft 12 AWG 300 ft 14 AWG 190 ft 16 AWG 119 ft 18 AWG 75 ft 12 AWG 2 ft 14 AWG 127 ft 16 AWG 80 ft 18 AWG 50 ft 12 AWG 121 ft 14 AWG 76 ft 16 AWG 48 ft 18 AWG 30 ft 12 AWG 81 ft 14 AWG 51 ft 16 AWG 32 ft 18 AWG 20 ft 12 AWG 61 ft 14 AWG 38 ft 16 AWG 24 ft 18 AWG 15 ft 12 AWG 41 ft 14 AWG 26 ft 16 AWG 16 ft 18 AWG 10 ft * Every 32 linear feet of light must be home-run to a transformer.
Part #: NEON -P ARC 24VDC WHT lc con cab LED Neon Light Arch Handling Guide HANDLING Curve no tighter than 80mm circumfrence 300mm 11.8 300mm 11.8 Gently bend (along the TOP and BOTTOM) up and/or down into an arch shape LED NEON ARCH MAY BE HANDLED IN THE WAYS MENTIONED ABOVE DO NOT HANDLE LED NEON ARCH AS SHOWN BELOW. IT MAY DAMAGE YOUR LIGHT. DO NOT twist. DO NOT bend sideways. DO NOT hang. Light MUST be installed on a solid surface. Factory installed End Connector shown.
LED Neon Light Arch Applications: Attention grabbing illumination for indoor and outdoor applications. Great for signage or facade lighting. The Arch is a bright and rugged LED Neon light with an arch bend that provides illumination shining opposite the curve, rather than alongside it. Flexibility and bright illumination is combined in a rugged housing which emits light at 160 degrees. Because the Arch is rated IP68, it can be fully submersed to upgrade underwater features. Enliven almost any application with a stunning array of white lights. Achieve straight or curved installations with a selection of mounting accessories that allow for any angle of lighting installation (even if it s upside down). These lights can also be bent up to 300 millimetres, removing any limitations experienced with other LED lights. Connect up to 32 feet on one transformer or 65 feet with a dual power option. Visit our LED Lighting Inspiration Centre 15 Brownridge Rd. Unit 6 Halton Hills, ON L7G 0C6 1. 877. LED2DAY (533. 2329) 905. 487. 8192 SGiLighting.com