LED Neon Light Arch RGB
Part #: NEON -P ARC 24VDC WHT RGB con cab LED Neon Light Arch RGB Length CST Custom Length cuttable every 2.81 Operating Voltage (ov) 24V DC Finish (fin) WHT White SPECIFICATION Light Colour (lc) Correlated Colour Temperature (CCT) RGB Colour Changing Also available in Whites and Single Colours Please see individual product spec sheets A Snap Connection (con) S Side * B Bottom * E End * Cable Length (cab) 10 10 feet 30 30 feet 02 2 feet 05 5 feet CST * Custom length and connector Beam Angle (ba) Degrees 160 Light Output Lumens RGB White 336.6 per foot IP Rating Dimension Width, Height, Length Watts IP68 W 0.62 16 mm H 0.66 17 mm L Specify maximum length in inches 4.57W per foot Input Voltage AC 100V 240V, 277V external transformer Dimmable Yes With dimmable transformer MLV, ELV or 0-10V Operating Temperature 25 C to +50 C 13 F to 122 F Life Lumen Maintenance 50,000 hours Part Number Configuration NEON-P-ARC-ov-fin-lc-con-cab Category Grade Family Operating Voltage (ov) Finish (fin) Light Colour (lc) Connection (con) NEON P-Professional ARC 24VDC WHT White RGB A Snap S Side * B Bottom * E End * Cable Length (cab) 02 05 10 30 CST * * Available on special order Can be Field Installed See Connections page(s) for more details
Part #: NEON -P ARC 24VDC WHT RGB con cab LED Neon Light Arch RGB Snap Connect Field Installation CONNECTIONS 52 25 Low Profile Snap Connector A Factory OR Field Install 24.5 Custom Length (Maximum 5 meters) 02 3 1 Fit Neon strip through clear PC cover. Move the cover down to make room. 1A PC Cover has two sides. Ensure snap end is closest to the connector. 2 Insert connector behind PCB. See following panel for more detail. Snap End Rear End Note: Once connected there will be a 2-5mm gap between connector and light PCB LED board 3 Flatten out Self-locking Clip. Align it with Neon strip and fold up. 4 Align steel U-Plate with connector guides and snap on. Insert connector here (Between PCB and PVC) Fold flaps in PVC Housing Bottom tab sticks out 5 The U-Plate uses the conncetor guides to automatically tighten the seal 6 Bring clear PC cover back towards the front of the strip to cover connection. Finished view of Connector (Repeat Steps 1 6 to install End Cap)
Part #: NEON -P ARC 24VDC WHT RGB con cab LED Neon Light Arch RGB Factory Connection Options CONNECTIONS 16 End Connector E * Injection Molded Factory Installed Custom Length (Maximum 5 meters) 11 12 19 20 18 11 18 Side Connector S * Injection Molded Factory Installed Custom Length (Maximum 5 meters) 19 12 19 30 1.8 16 Bottom Connector B * Injection Molded Factory Installed Custom Length (Maximum 5 meters) 19 30 12 11 18 * Available on special order
Part #: NEON -P ARC 24VDC WHT RGB con cab LED Neon Light Arch RGB Cable Options CONNECTIONS Cable Options for RGB Colour Changing 02, 05, 10, 30 or CST (Custom length) 3 in 31 mm 5 in Easy Quick Connects 2ft, 5ft, 10ft, 30ft or CST (Minimum 3in) Hard wire to DMX Decoder 15 mm Cable Junction 12 mm Total length when connected 9 mm 36 mm 38 mm Voltage + black To Controller 11 mm 29 mm To Lights Voltage + black 17 mm 63 mm 17 mm 22AWG 4 Conductor Shielded Cable CABLE-32-22AWG-4S Shielding 4.6 mm Black wire 1.3 mm Red wire 1.3 mm 15 mm 17 mm 10 mm Custom Length Green wire 1.3 mm Blue wire 1.3 mm
Part #: TRACK NEON 2120SL CST fin N LED Track Neon 2120 Self-Locking SPECIFICATION Finish (fin) Custom Length Housing WHT White * SIL Silver BLK Black * Custom Track lengths available Please specify length in inches Standard length 1 m (39 ), maximum 2.5 m (98 ) Aluminum Alloy Compatible Lights Arch LED Neon Light NEON-P-ARC-ov-fin-lc-con-cab 02 20 20.5 Dimensions in millimeters Part Number Configuration TRACK-NEON-2120SL-CST-fin-ln-N Finish Category Family (fin) TRACK NEON 2120 SL SIL Silver WHT White * BLK Black * Custom finishes available * Lens (ln) N None * Available on special order
Part #: TRACK NEON 2120SL CST fin N LED Track Neon 2120 Self-Locking Straight Installation INSTALLATION Self-Locking clips will fit in here 20 1 meter or 2 meter lengths (field cuttable to custom lengths) 20.5 Track Dimensions (mm) Self-Locking Clip Screw head completely flush with bottom of track Only neon body fits inside track. Snap connector should fall just outside the track.
Part #: TRACK NEON 1918 CST fin N LED Track Neon 1918 SPECIFICATION Finish (fin) Custom Length Housing WHT White * SIL Silver BLK Black * Custom Track lengths available Please specify length in inches Standard length 1 m (39 ), maximum 2.5 m (98 ) Aluminum Alloy Compatible Lights Arch LED Neon Light NEON-P-ARC-ov-fin-lc-con-cab 02 18 19 Dimensions in millimeters Part Number Configuration TRACK-NEON-1918-CST-fin-ln-N Finish Category Family (fin) TRACK NEON 1918 SIL Silver WHT White * BLK Black * Custom finishes available * Lens (ln) N None * Available on special order
Part #: TRACK NEON 1918 CST fin N LED Track Neon 1918 Straight Installation INSTALLATION 18 1 meter or 2 meter lengths (field cuttable to custom lengths) 19 Track Dimensions (mm) Screw head completely flush with bottom of track Only neon body fits inside track. Snap connector should fall just outside the track.
Part #: CLIP NEON 2120SL 35MM fin N LED Clip Neon 2120 Self-Locking SPECIFICATION Finish (fin) WHT White * SIL Silver BLK Black * Length 1.37 35 mm (Tolerance +/ 0.3mm) Housing Aluminum Alloy Compatible Lights Arch LED Neon Light NEON-P-ARC-ov-fin-lc-con-cab 02 20 CLIP 20.5 35.2 CLIP CLIP Dimensions in millimeters Part Number Configuration CLIP-NEON-2120-SL35MM-fin Finish Category Family Length (fin) CLIP NEON 2120 SL 1.37 IN 35mm SIL Silver WHT White * BLK Black * Custom finishes available * * Available on special order
Part #: CLIP NEON 2120SL 35MM fin N LED Clip Neon 2120 Self-Locking Curved Installation INSTALLATION Self-Locking clip will fit in here 2 in 2 in Use multiple track clips to create a curved path for the LED Neon light. + +... 20 20.5 Track Dimensions (mm) Self-Locking Clip Screw head completely flush with bottom of track
Part #: CLIP NEON 1918 2IN fin N LED Clip Neon 1918 SPECIFICATION Finish (fin) WHT White * SIL Silver BLK Black * Custom Length 1.37 35 mm (Tolerance +/ 0.3mm) Housing Aluminum Alloy Compatible Lights Arch LED Neon Light NEON-P-ARC-ov-fin-lc-con-cab 02 14.7 CLIP 14 35.2 CLIP CLIP Dimensions in millimeters Part Number Configuration CLIP-NEON-1918-35MM-fin Finish Category Family Length (fin) CLIP NEON 1918 1.37 IN 35mm SIL Silver WHT White * BLK Black * Custom finishes available * * Available on special order
Part #: CLIP NEON 1918 2IN fin N LED Clip Neon 1918 Curved Installation INSTALLATION 2 in 2 in Use multiple track clips to create a curved path for the LED Neon light. + +... 18 19 Track Dimensions (mm) Screw head completely flush with bottom of track
Part #: NEON -P ARC 24VDC WHT RGB con cab LED Neon Light Arch RGB Wiring Instructions INSTALLATION LED FLAT TOP NEON RGB WIRING To Start: You will need: Marettes Clear silicone SGi LED Transformer(s) SGi LED Neon Light Strip(s) 18 to 22 AWG 4 or 5 conductor shielded cable * Non-dimmable drivers are available INPUT 120V AC 120V AC POWER Optional 0 10V Dimmer OR Alternate dimming by remote control + RED BLK V+ R CONTROL SYSTEM G B (Optional) W Contoller options available: Standard RGB Multi-zone RGB(W) DMX Decoder Advanced DMX Dali See control systems diagrams for details NEON-P-ARCH-ov-fin-RGB-con-cab POWER-36-24VDC-watt DIMMABLE Max linear ft of light 20 Watt Power 40 Watt Power 60 Watt Power 96 Watt Power 150 Watt Power 200 Watt Power 300 Watt Power 3 ft 7 ft 10 ft 16.5 ft 26 ft 35 ft * 52 ft * Max Distance between power & light 12 AWG 300 ft 14 AWG 300 ft 16 AWG 238 ft 18 AWG 150 ft 12 AWG 300 ft 14 AWG 190 ft 16 AWG 119 ft 18 AWG 75 ft 12 AWG 2 ft 14 AWG 127 ft 16 AWG 80 ft 18 AWG 50 ft 12 AWG 121 ft 14 AWG 76 ft 16 AWG 48 ft 18 AWG 30 ft 12 AWG 81 ft 14 AWG 51 ft 16 AWG 32 ft 18 AWG 20 ft 12 AWG 61 ft 14 AWG 38 ft 16 AWG 24 ft 18 AWG 15 ft 12 AWG 41 ft 14 AWG 26 ft 16 AWG 16 ft 18 AWG 10 ft * Every 32 linear feet of light must be home-run to a transformer.
Part #: NEON -P ARC 24VDC WHT RGB con cab LED Neon Light Arch RGB Handling Guide HANDLING Curve no tighter than 80mm circumfrence 300mm 11.8 300mm 11.8 Gently bend (along the TOP and BOTTOM) up and/or down into an arch shape LED NEON ARCH MAY BE HANDLED IN THE WAYS MENTIONED ABOVE DO NOT HANDLE LED NEON ARCH AS SHOWN BELOW. IT MAY DAMAGE YOUR LIGHT. DO NOT twist. DO NOT bend sideways. DO NOT hang. Light MUST be installed on a solid surface. Factory installed End Connector shown.
LED Neon Light Arch RGB Applications: Attention grabbing illumination for indoor and outdoor applications. Great for signage or facade lighting. Enjoy stunning hues with RGB LED Neon Lights. The Arch is a bright and rugged LED Neon light with an arch bend that provides illumination shining opposite the curve, rather than alongside it. Flexibility and bright illumination is combined in a rugged housing which emits light at 160 degrees. Because the Arch is rated IP68, it can be fully submersed to upgrade underwater features. Enliven almost any application with colourful illumination. Achieve straight or curved installations with a selection of mounting accessories like self-locking tracks or clips that allow for any angle of lighting installation (even if it s upside down). LED Neon Lights can also be bent up to 300 millimetres, removing any limitations experienced with other LED lights. Visit our LED Lighting Inspiration Centre 15 Brownridge Rd. Unit 6 Halton Hills, ON L7G 0C6 1. 877. LED2DAY (533. 2329) 905. 487. 8192 SGiLighting.com