SPECIAL HINGES From flap hinges and mini-hinges to glass door hinges for direct mounting on the cabinet side wall. 0 GRASS THE CATALOGUE 0-0
SPECIAL HINGES Hinges for special applications. Where individual solutions are needed. Opening angle 90 View Product description Flap hinge Flap thicknesses up to 0 mm Ø mm cup hole -dimensional adjustment Full overlay Half overlay Inset Page 90 Mini-hinge A 90/E 90 Direct mounting on cabinet side wall Cup Ø mm Ideal for doors with narrow frames 9 Glass door hinge A 90GL/E 90GL Direct mounting on cabinet side wall Cup Ø mm Ideal for display cabinets 0 0 0 glass door hinge For glass thicknesses from to mm Direct mounting on cabinet side wall Fixing to the door without drilling Glass door hinge +0/-0 For glass thicknesses from to mm Universal application for cabinet angles from +0 to -0 Fixing to the door without drilling 0 0-0 THE CATALOGUE GRASS
FLAP HINGE 90 hinge with mm cup Flap hinge.90 hinge with mm cup.. 90 90 opening angle For flap thicknesses up to 0 mm Cup edge cover Base and flap part are supplied unassembled Base and flap part have the same drilling dimensions -dimensional adjustment Sturdy design ORDER INFORMATION Door overlay View Material Cup Arm Screw fixing Full overlay F0099 Installation technology GRASS THE CATALOGUE Packaging units are not covered in this catalogue; please enquire with your supplier 0-0
HINGE SYSTEMS SPECIAL HINGES 90 FLAP HINGE Hinge systems.special hinges.90 flap hinge INSTALLATION INFORMATION All dimensions in millimetres Full overlay TS 0mm mm F Flap thickness (TS) Minimum reveal (F) 0..0.0.0. 9.0 0.0 NUMBER OF HINGES 00 mm NOTES Fixing of flap and base parts with cylinder head screws (Ø x mm) (screws not supplied). Hinge dimensions and reveal calculation with factory setting. 00 mm 00 mm DRILLING PATTERNS Version for screw fixing. mm mm CUP DIMENSIONS Ø. Ø 0-0 All dimensions in millimetres. Subject to changes THE CATALOGUE GRASS mm mm
MINI-HINGE A 90/E 90 90 hinge with mm cup Mini-hinge A 90/E 90.With direct mounting on cabinet sidewall. 90 opening angle With Ø mm cup hole, ideal for doors with narrow frames One-piece hinge Three-point fixing on cabinet is possible Height adjustment by means of slots 90 ORDER INFORMATION Door overlay View Material Cup Arm Screw fixing Full overlay Steel, F00 Half overlay Steel, F00 Inset Steel, F00 Installation technology GRASS THE CATALOGUE Packaging units are not covered in this catalogue; please enquire with your supplier 0-0
HINGE SYSTEMS SPECIAL HINGES MINI-HINGE A 90/E 90 Hinge systems.special hinges.mini-hinge A 90/E 90 INSTALLATION INFORMATION All dimensions in millimetres Full overlay A 90 Half overlay A 90 Inset E 90 F TS Door overlay Cup distance Door overlay Cup distance Door reveal (F) Cup distance (TS) = door thickness Position of holes for fixing hinge to cabinet 0 +TS 0 DRILLING PATTERNS Version for screw fixing CUP DIMENSIONS 0-0 All dimensions in millimetres. Subject to changes THE CATALOGUE GRASS
GLASS DOOR HINGE A 90GL/E 90GL For direct mounting on cabinet side wall Glass door hinge A 90GL/E 90GL.For direct mounting on cabinet side wall. 9 opening angle One-piece glass door hinge Ideal for display cabinets -point fixing on cabinet is possible Height adjustment by means of slots 9 ORDER INFORMATION Door overlay View Cup Material Arm Half overlay Plastic, black F00 Inset Plastic, black F00 DECORATIVE COVER CAPS Designation Nickel velour F0900 Nickel polished, eroded F090 Brass polished, eroded F090 Brass velour F090 Silver RAL 900 F0900 Black F090 Designation Nickel velour F090 Stainless steel F090 Nickel polished, eroded F090 Brass polished, eroded F090 Brass velour F090 Silver RAL 900 F090 Black F090 Chrome finish F0909 Installation technology GRASS THE CATALOGUE Packaging units are not covered in this catalogue; please enquire with your supplier 0-0
HINGE SYSTEMS SPECIAL HINGES GLASS DOOR HINGE A 90GL/E 90GL Hinge systems.special hinges.glass door hinge A 90GL/E 90GL INSTALLATION INFORMATION All dimensions in millimetres Half overlay A 90GL Inset E 90GL - (TS) 9 F TS + Door overlay Cup distance Door reveal (F) Cup distance (TS) = door thickness Position of holes for fixing hinge to cabinet +TS 0 DRILLING PATTERNS 9 +0. - +0. - CUP DIMENSIONS Ø +0. - 0-0 All dimensions in millimetres. Subject to changes THE CATALOGUE GRASS
GLASS DOOR HINGE 0 for direct mounting on cabinet side wall Glass door hinge.0 for direct mounting on cabinet side wall. 0 opening angle Particularly flat design Fixing to the door without drilling For glass thicknesses from to mm 0 ORDER INFORMATION Door overlay View Position Material Cup Arm Inset nickelplated nickelplated F009 Left at the top / right at the bottom Right at the top / left at the bottom PULL Designation, fixing with self-adhesive pad F090 Installation technology GRASS THE CATALOGUE Packaging units are not covered in this catalogue; please enquire with your supplier 0-0
HINGE SYSTEMS SPECIAL HINGES 0 GLASS DOOR HINGE Hinge systems.special hinges.0 glass door hinge INSTALLATION INFORMATION All dimensions in millimetres Inset NUMBER OF HINGES 00 mm 0 mm INSTALLATION INSTRUCTIONS Attach double-sided adhesive pad at the glass corners. Remove foil. Insert the glass door into the fitted hinge with the side with the adhesive pad facing outwards. Tighten clamping screw. Density:. kg/dm =. kg with mm glass thickness PULL POSITION INSTALLING THE PULL Decide the pull position, attach double-sided adhesive pad. Remove foil. Insert glass door into the pull with the adhesive pad facing outwards. Tighten clamping screw (max. Nm). 0-0 All dimensions in millimetres. Subject to changes THE CATALOGUE GRASS 9
GLASS DOOR HINGE +0 to -0 variable-angle glass and mirror door hinge Glass door hinge.+0 to -0 variable-angle glass and mirror door hinge. 0 opening angle Universal application for cabinet angles from +0 to -0 Fixing to the door without drilling Ideal for small doors For glass thicknesses from to mm 0 ORDER INFORMATION Door overlay View Position Material Cup Arm nickelplated nickelplated F00 Full overlay nickelplated nickelplated F00 Left at the top / right at the bottom Right at the top / left at the bottom PULL Designation, fixing with self- adhesive pad F090 Installation technology 0 GRASS THE CATALOGUE Packaging units are not covered in this catalogue; please enquire with your supplier 0-0
HINGE SYSTEMS SPECIAL HINGES GLASS DOOR HINGE +0/-0 Hinge systems.special hinges.glass door hinge +0/-0 INSTALLATION INFORMATION All dimensions in millimetres Full overlay +0-0 NUMBER OF HINGES 00 mm 0 mm PULL POSITION INSTALLATION INSTRUCTIONS Attach adhesive pad to the glass corners. Insert the glass door into the fitted hinge with the side with the adhesive pad facing outwards. Tighten clamping screw. Density:. kg/dm =. kg with mm glass thickness INSTALLING THE PULL Decide the pull position, attach double-sided adhesive pad. Remove foil. Insert glass door into the pull with the adhesive pad facing outwards. Tighten clamping screw (max. Nm). 0-0 All dimensions in millimetres. Subject to changes THE CATALOGUE GRASS